[u-boot.git] / include / configs / mx35pdk.h

/*
 * (C) Copyright 2010, Stefano Babic <[email protected]>
 *
 * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
 *
 * Copyright (C) 2007, Guennadi Liakhovetski <[email protected]>
 *
 * Configuration for the MX35pdk Freescale board.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <asm/arch/imx-regs.h>

 /* High Level Configuration Options */
#define CONFIG_ARM1136	/* This is an arm1136 CPU core */
#define CONFIG_MX35
#define CONFIG_MX35_HCLK_FREQ	24000000

#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO

/* Set TEXT at the beginning of the NOR flash */
#define CONFIG_SYS_TEXT_BASE	0xA0000000

#define CONFIG_SYS_64BIT_VSPRINTF

#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT

#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
#define CONFIG_REVISION_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 1024 * 1024)

/*
 * Hardware drivers
 */
#define CONFIG_HARD_I2C
#define CONFIG_I2C_MXC
#define CONFIG_SYS_I2C_MX35_PORT1
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_SYS_I2C_SLAVE		0xfe
#define CONFIG_MXC_SPI
#define CONFIG_MXC_GPIO


/*
 * PMIC Configs
 */
#define CONFIG_PMIC
#define CONFIG_PMIC_I2C
#define CONFIG_PMIC_FSL
#define CONFIG_SYS_FSL_PMIC_I2C_ADDR	0x08

/*
 * MFD MC9SDZ60
 */
#define CONFIG_FSL_MC9SDZ60
#define CONFIG_SYS_FSL_MC9SDZ60_I2C_ADDR	0x69

/*
 * UART (console)
 */
#define CONFIG_MXC_UART
#define CONFIG_SYS_MX35_UART1

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX	1
#define CONFIG_BAUDRATE		115200
#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}

/*
 * Command definition
 */

#include <config_cmd_default.h>

#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_DNS

#define CONFIG_CMD_NAND

#define CONFIG_CMD_I2C
#define CONFIG_CMD_SPI
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_NET_RETRY_COUNT	100

#define CONFIG_BOOTDELAY	3

#define CONFIG_LOADADDR		0x80800000	/* loadaddr env var */

/*
 * Ethernet on the debug board (SMC911)
 */
#define CONFIG_SMC911X
#define CONFIG_SMC911X_16_BIT 1
#define CONFIG_SMC911X_BASE CS5_BASE_ADDR

#define CONFIG_HAS_ETH1
#define CONFIG_ETHPRIME

/*
 * Ethernet on SOC (FEC)
 */
#define CONFIG_FEC_MXC
#define IMX_FEC_BASE	FEC_BASE_ADDR
#define CONFIG_FEC_MXC_PHYADDR	0x1F

#define CONFIG_MII
#define CONFIG_DISCOVER_PHY

#define CONFIG_ARP_TIMEOUT	200UL

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP	/* undef to save memory */
#define CONFIG_SYS_PROMPT	"MX35 U-Boot > "
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_HUSH_PARSER	/* Use the HUSH parser */
#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "

#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START	0	/* memtest works on */
#define CONFIG_SYS_MEMTEST_END		0x10000

#undef	CONFIG_SYS_CLKS_IN_HZ	/* everything, incl board info, in Hz */

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR

#define CONFIG_SYS_HZ				1000


/*
 * Stack sizes
 *
 * The stack sizes are set up in start.S using the settings below
 */
#define CONFIG_STACKSIZE	(128 * 1024)	/* regular stack */

/*
 * Physical Memory Map
 */
#define CONFIG_NR_DRAM_BANKS	2
#define PHYS_SDRAM_1		CSD0_BASE_ADDR
#define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)
#define PHYS_SDRAM_2		CSD1_BASE_ADDR
#define PHYS_SDRAM_2_SIZE	(128 * 1024 * 1024)

#define CONFIG_SYS_SDRAM_BASE		CSD0_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_ADDR	(IRAM_BASE_ADDR + 0x10000)
#define CONFIG_SYS_INIT_RAM_SIZE		(IRAM_SIZE / 2)
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
					GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
					CONFIG_SYS_GBL_DATA_OFFSET)

/*
 * MTD Command for mtdparts
 */
#define CONFIG_CMD_MTDPARTS
#define CONFIG_MTD_DEVICE
#define CONFIG_FLASH_CFI_MTD
#define CONFIG_MTD_PARTITIONS
#define MTDIDS_DEFAULT		"nand0=mxc_nand,nor0=physmap-flash.0"
#define MTDPARTS_DEFAULT	"mtdparts=mxc_nand:1m(boot),5m(linux),"	\
				"96m(root),8m(cfg),1938m(user);"	\
				"physmap-flash.0:512k(b),4m(k),30m(u),28m(r)"

/*
 * FLASH and environment organization
 */
#define CONFIG_SYS_FLASH_BASE		CS0_BASE_ADDR
#define CONFIG_SYS_MAX_FLASH_BANKS 1	/* max number of memory banks */
#define CONFIG_SYS_MAX_FLASH_SECT 512	/* max number of sectors on one chip */
/* Monitor at beginning of flash */
#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)

#define CONFIG_ENV_SECT_SIZE	(128 * 1024)
#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE

/* Address and size of Redundant Environment Sector	*/
#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE

#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + \
				CONFIG_SYS_MONITOR_LEN)

#define CONFIG_ENV_IS_IN_FLASH

#if defined(CONFIG_FSL_ENV_IN_NAND)
	#define CONFIG_ENV_IS_IN_NAND
	#define CONFIG_ENV_OFFSET       (1024 * 1024)
#endif

/*
 * CFI FLASH driver setup
 */
#define CONFIG_SYS_FLASH_CFI		/* Flash memory is CFI compliant */
#define CONFIG_FLASH_CFI_DRIVER

/* A non-standard buffered write algorithm */
#define CONFIG_FLASH_SPANSION_S29WS_N
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	/* faster */
#define CONFIG_SYS_FLASH_PROTECTION	/* Use hardware sector protection */

/*
 * NAND FLASH driver setup
 */
#define CONFIG_NAND_MXC
#define CONFIG_NAND_MXC_V1_1
#define CONFIG_MXC_NAND_REGS_BASE	(NFC_BASE_ADDR)
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		(NFC_BASE_ADDR)
#define CONFIG_MXC_NAND_HWECC
#define CONFIG_SYS_NAND_LARGEPAGE

/*
 * Default environment and default scripts
 * to update uboot and load kernel
 */
#define xstr(s)	str(s)
#define str(s)	#s

#define CONFIG_HOSTNAME "mx35pdk"
#define	CONFIG_EXTRA_ENV_SETTINGS					\
	"netdev=eth1\0"							\
	"ethprime=smc911x\0"						\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
		"nfsroot=${serverip}:${rootpath}\0"			\
	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
	"addip_sta=setenv bootargs ${bootargs} "			\
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
		":${hostname}:${netdev}:off panic=1\0"			\
	"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"		\
	"addip=if test -n ${ipdyn};then run addip_dyn;"			\
		"else run addip_sta;fi\0"	\
	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
	"addtty=setenv bootargs ${bootargs}"				\
		" console=ttymxc0,${baudrate}\0"			\
	"addmisc=setenv bootargs ${bootargs} ${misc}\0"			\
	"loadaddr=80800000\0"						\
	"kernel_addr_r=80800000\0"					\
	"hostname=" xstr(CONFIG_HOSTNAME) "\0"				\
	"bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0"			\
	"ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0"		\
	"flash_self=run ramargs addip addtty addmtd addmisc;"		\
		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
	"flash_nfs=run nfsargs addip addtty addmtd addmisc;"		\
		"bootm ${kernel_addr}\0"				\
	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
		"run nfsargs addip addtty addmtd addmisc;"		\
		"bootm ${kernel_addr_r}\0"				\
	"net_self_load=tftp ${kernel_addr_r} ${bootfile};"		\
		"tftp ${ramdisk_addr_r} ${ramdisk_file};\0"		\
	"u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0"			\
	"load=tftp ${loadaddr} ${u-boot}\0"				\
	"uboot_addr=" xstr(CONFIG_SYS_MONITOR_BASE) "\0"		\
	"update=protect off ${uboot_addr} +40000;"			\
		"erase ${uboot_addr} +40000;"				\
		"cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"		\
	"upd=if run load;then echo Updating u-boot;if run update;"	\
		"then echo U-Boot updated;"				\
			"else echo Error updating u-boot !;"		\
			"echo Board without bootloader !!;"		\
		"fi;"							\
		"else echo U-Boot not downloaded..exiting;fi\0"		\
	"bootcmd=run net_nfs\0"

#endif				/* __CONFIG_H */
Commit	Line	Data
eae4988b SB	1	/*
	2	* (C) Copyright 2010, Stefano Babic <[email protected]>
	3	*
	4	* (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
	5	*
	6	* Copyright (C) 2007, Guennadi Liakhovetski <[email protected]>
	7	*
	8	* Configuration for the MX35pdk Freescale board.
	9	*
	10	* This program is free software; you can redistribute it and/or
	11	* modify it under the terms of the GNU General Public License as
	12	* published by the Free Software Foundation; either version 2 of
	13	* the License, or (at your option) any later version.
	14	*
	15	* This program is distributed in the hope that it will be useful,
	16	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	17	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	18	* GNU General Public License for more details.
	19	*
	20	* You should have received a copy of the GNU General Public License
	21	* along with this program; if not, write to the Free Software
	22	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	23	* MA 02111-1307 USA
	24	*/
	25
	26	#ifndef __CONFIG_H
	27	#define __CONFIG_H
	28
	29	#include <asm/arch/imx-regs.h>
	30
	31	/* High Level Configuration Options */
	32	#define CONFIG_ARM1136 /* This is an arm1136 CPU core */
	33	#define CONFIG_MX35
	34	#define CONFIG_MX35_HCLK_FREQ 24000000
	35
	36	#define CONFIG_DISPLAY_CPUINFO
	37	#define CONFIG_DISPLAY_BOARDINFO
	38
	39	/* Set TEXT at the beginning of the NOR flash */
	40	#define CONFIG_SYS_TEXT_BASE 0xA0000000
	41
	42	#define CONFIG_SYS_64BIT_VSPRINTF
	43
	44	#define CONFIG_BOARD_EARLY_INIT_F
9660e442	45	#define CONFIG_BOARD_LATE_INIT
eae4988b SB	46
	47	#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
	48	#define CONFIG_REVISION_TAG
	49	#define CONFIG_SETUP_MEMORY_TAGS
	50	#define CONFIG_INITRD_TAG
	51
	52	/*
	53	* Size of malloc() pool
	54	*/
	55	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024)
	56
	57	/*
	58	* Hardware drivers
	59	*/
	60	#define CONFIG_HARD_I2C
	61	#define CONFIG_I2C_MXC
	62	#define CONFIG_SYS_I2C_MX35_PORT1
	63	#define CONFIG_SYS_I2C_SPEED 100000
	64	#define CONFIG_SYS_I2C_SLAVE 0xfe
	65	#define CONFIG_MXC_SPI
a4adedd4	66	#define CONFIG_MXC_GPIO
eae4988b SB	67
	68
	69	/*
	70	* PMIC Configs
	71	*/
5213d6e4 SB	72	#define CONFIG_PMIC
	73	#define CONFIG_PMIC_I2C
	74	#define CONFIG_PMIC_FSL
eae4988b SB	75	#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x08
	76
	77	/*
	78	* MFD MC9SDZ60
	79	*/
	80	#define CONFIG_FSL_MC9SDZ60
	81	#define CONFIG_SYS_FSL_MC9SDZ60_I2C_ADDR 0x69
	82
	83	/*
	84	* UART (console)
	85	*/
	86	#define CONFIG_MXC_UART
	87	#define CONFIG_SYS_MX35_UART1
	88
	89	/* allow to overwrite serial and ethaddr */
	90	#define CONFIG_ENV_OVERWRITE
	91	#define CONFIG_CONS_INDEX 1
	92	#define CONFIG_BAUDRATE 115200
	93	#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
	94
	95	/*
	96	* Command definition
	97	*/
	98
	99	#include <config_cmd_default.h>
	100
	101	#define CONFIG_CMD_PING
	102	#define CONFIG_CMD_DHCP
	103	#define CONFIG_BOOTP_SUBNETMASK
	104	#define CONFIG_BOOTP_GATEWAY
	105	#define CONFIG_BOOTP_DNS
	106
	107	#define CONFIG_CMD_NAND
	108
	109	#define CONFIG_CMD_I2C
	110	#define CONFIG_CMD_SPI
	111	#define CONFIG_CMD_MII
	112	#define CONFIG_CMD_NET
	113	#define CONFIG_NET_RETRY_COUNT 100
	114
	115	#define CONFIG_BOOTDELAY 3
	116
	117	#define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */
	118
	119	/*
	120	* Ethernet on the debug board (SMC911)
	121	*/
	122	#define CONFIG_SMC911X
	123	#define CONFIG_SMC911X_16_BIT 1
	124	#define CONFIG_SMC911X_BASE CS5_BASE_ADDR
	125
	126	#define CONFIG_HAS_ETH1
eae4988b SB	127	#define CONFIG_ETHPRIME
	128
	129	/*
	130	* Ethernet on SOC (FEC)
	131	*/
	132	#define CONFIG_FEC_MXC
	133	#define IMX_FEC_BASE FEC_BASE_ADDR
	134	#define CONFIG_FEC_MXC_PHYADDR 0x1F
	135
	136	#define CONFIG_MII
	137	#define CONFIG_DISCOVER_PHY
	138
	139	#define CONFIG_ARP_TIMEOUT 200UL
	140
	141	/*
	142	* Miscellaneous configurable options
	143	*/
	144	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	145	#define CONFIG_SYS_PROMPT "MX35 U-Boot > "
	146	#define CONFIG_CMDLINE_EDITING
	147	#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
	148	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
	149
	150	#define CONFIG_AUTO_COMPLETE
	151	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	152	/* Print Buffer Size */
	153	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	154	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	155	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
	156
	157	#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */
	158	#define CONFIG_SYS_MEMTEST_END 0x10000
	159
	160	#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
	161
	162	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	163
	164	#define CONFIG_SYS_HZ 1000
	165
	166
	167	/*
	168	* Stack sizes
	169	*
	170	* The stack sizes are set up in start.S using the settings below
	171	*/
	172	#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
	173
	174	/*
	175	* Physical Memory Map
	176	*/
6b5acfc1	177	#define CONFIG_NR_DRAM_BANKS 2
eae4988b SB	178	#define PHYS_SDRAM_1 CSD0_BASE_ADDR
eae4988b SB	179	#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
6b5acfc1 SB	180	#define PHYS_SDRAM_2 CSD1_BASE_ADDR
6b5acfc1 SB	181	#define PHYS_SDRAM_2_SIZE (128 * 1024 * 1024)
eae4988b SB	182
	183	#define CONFIG_SYS_SDRAM_BASE CSD0_BASE_ADDR
	184	#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR + 0x10000)
	185	#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE / 2)
	186	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
	187	GENERATED_GBL_DATA_SIZE)
	188	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
	189	CONFIG_SYS_GBL_DATA_OFFSET)
	190
	191	/*
	192	* MTD Command for mtdparts
	193	*/
	194	#define CONFIG_CMD_MTDPARTS
	195	#define CONFIG_MTD_DEVICE
	196	#define CONFIG_FLASH_CFI_MTD
	197	#define CONFIG_MTD_PARTITIONS
	198	#define MTDIDS_DEFAULT "nand0=mxc_nand,nor0=physmap-flash.0"
	199	#define MTDPARTS_DEFAULT "mtdparts=mxc_nand:1m(boot),5m(linux)," \
	200	"96m(root),8m(cfg),1938m(user);" \
	201	"physmap-flash.0:512k(b),4m(k),30m(u),28m(r)"
	202
	203	/*
	204	* FLASH and environment organization
	205	*/
	206	#define CONFIG_SYS_FLASH_BASE CS0_BASE_ADDR
	207	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
	208	#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
	209	/* Monitor at beginning of flash */
	210	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
	211	#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
	212
	213	#define CONFIG_ENV_SECT_SIZE (128 * 1024)
	214	#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
	215
	216	/* Address and size of Redundant Environment Sector */
	217	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
	218	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
	219
	220	#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
	221	CONFIG_SYS_MONITOR_LEN)
	222
	223	#define CONFIG_ENV_IS_IN_FLASH
	224
	225	#if defined(CONFIG_FSL_ENV_IN_NAND)
	226	#define CONFIG_ENV_IS_IN_NAND
	227	#define CONFIG_ENV_OFFSET (1024 * 1024)
	228	#endif
	229
	230	/*
	231	* CFI FLASH driver setup
	232	*/
	233	#define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */
	234	#define CONFIG_FLASH_CFI_DRIVER
	235
	236	/* A non-standard buffered write algorithm */
	237	#define CONFIG_FLASH_SPANSION_S29WS_N
	238	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* faster */
	239	#define CONFIG_SYS_FLASH_PROTECTION /* Use hardware sector protection */
	240
	241	/*
	242	* NAND FLASH driver setup
	243	*/
	244	#define CONFIG_NAND_MXC
	245	#define CONFIG_NAND_MXC_V1_1
246	#define CONFIG_MXC_NAND_REGS_BASE (NFC_BASE_ADDR)
247	#define CONFIG_SYS_MAX_NAND_DEVICE 1
248	#define CONFIG_SYS_NAND_BASE (NFC_BASE_ADDR)
249	#define CONFIG_MXC_NAND_HWECC
250	#define CONFIG_SYS_NAND_LARGEPAGE
251
252	/*
253	* Default environment and default scripts
254	* to update uboot and load kernel
255	*/
256	#define xstr(s) str(s)
257	#define str(s) #s
258
259	#define CONFIG_HOSTNAME "mx35pdk"
260	#define CONFIG_EXTRA_ENV_SETTINGS \
261	"netdev=eth1\0" \
262	"ethprime=smc911x\0" \
263	"nfsargs=setenv bootargs root=/dev/nfs rw " \
264	"nfsroot=${serverip}:${rootpath}\0" \
265	"ramargs=setenv bootargs root=/dev/ram rw\0" \
266	"addip_sta=setenv bootargs ${bootargs} " \
267	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
268	":${hostname}:${netdev}:off panic=1\0" \
269	"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \
270	"addip=if test -n ${ipdyn};then run addip_dyn;" \
271	"else run addip_sta;fi\0" \
272	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
273	"addtty=setenv bootargs ${bootargs}" \
274	" console=ttymxc0,${baudrate}\0" \
275	"addmisc=setenv bootargs ${bootargs} ${misc}\0" \
276	"loadaddr=80800000\0" \
277	"kernel_addr_r=80800000\0" \
278	"hostname=" xstr(CONFIG_HOSTNAME) "\0" \
279	"bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \
280	"ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0" \
281	"flash_self=run ramargs addip addtty addmtd addmisc;" \
282	"bootm ${kernel_addr} ${ramdisk_addr}\0" \
283	"flash_nfs=run nfsargs addip addtty addmtd addmisc;" \
284	"bootm ${kernel_addr}\0" \
285	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
286	"run nfsargs addip addtty addmtd addmisc;" \
287	"bootm ${kernel_addr_r}\0" \
288	"net_self_load=tftp ${kernel_addr_r} ${bootfile};" \
289	"tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \
290	"u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \
291	"load=tftp ${loadaddr} ${u-boot}\0" \
292	"uboot_addr=" xstr(CONFIG_SYS_MONITOR_BASE) "\0" \
293	"update=protect off ${uboot_addr} +40000;" \
294	"erase ${uboot_addr} +40000;" \
295	"cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \
296	"upd=if run load;then echo Updating u-boot;if run update;" \
297	"then echo U-Boot updated;" \
298	"else echo Error updating u-boot !;" \
299	"echo Board without bootloader !!;" \
300	"fi;" \
301	"else echo U-Boot not downloaded..exiting;fi\0" \
302	"bootcmd=run net_nfs\0"
303
304	#endif /* __CONFIG_H */