[u-boot.git] / include / configs / mvebu_armada-8k.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (C) 2016 Stefan Roese <[email protected]>
 */

#ifndef _CONFIG_MVEBU_ARMADA_8K_H
#define _CONFIG_MVEBU_ARMADA_8K_H

/*
 * High Level Configuration Options (easy to change)
 */
#define CONFIG_SYS_TCLK		250000000	/* 250MHz */

/* additions for new ARM relocation support */
#define CONFIG_SYS_SDRAM_BASE	0x00000000

/* auto boot */

#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
					  115200, 230400, 460800, 921600 }

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs  */
#define CONFIG_INITRD_TAG		/* enable INITRD tag */
#define CONFIG_SETUP_MEMORY_TAGS	/* enable memory tag */

#define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN	(4 << 20) /* 4MiB for malloc() */

/*
 * Other required minimal configurations
 */
#define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
#define CONFIG_SYS_MEMTEST_START 0x00800000	/* 8M */
#define CONFIG_SYS_MEMTEST_END	0x00ffffff	/*(_16M -1) */
#define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
#define CONFIG_SYS_MAXARGS	32	/* max number of command args */

/* End of 16M scrubbed by training in bootrom */
#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE + 0xFF0000)

#define CONFIG_ENV_OFFSET		0x180000 /* as Marvell U-Boot version */
#define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
#define CONFIG_ENV_SECT_SIZE		(64 << 10) /* 64KiB sectors */

/* When runtime detection fails this is the default */
#define CONFIG_SYS_MMC_ENV_DEV		0

#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_MAX_CHIPS	1
#define CONFIG_SYS_NAND_ONFI_DETECTION

/*
 * Ethernet Driver configuration
 */
#define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
#define CONFIG_ARP_TIMEOUT	200
#define CONFIG_NET_RETRY_COUNT	50

#define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)

/* USB ethernet */

/*
 * SATA/SCSI/AHCI configuration
 */
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_LBA48
#define CONFIG_SYS_64BIT_LBA

#define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
#define CONFIG_SYS_SCSI_MAX_LUN		1
#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
					 CONFIG_SYS_SCSI_MAX_LUN)

/*
 * PCI configuration
 */
#ifdef CONFIG_PCIE_DW_MVEBU
#define CONFIG_E1000
#endif

#define BOOT_TARGET_DEVICES(func) \
	func(MMC, mmc, 1) \
	func(MMC, mmc, 0) \
	func(USB, usb, 0) \
	func(SCSI, scsi, 0) \
	func(PXE, pxe, na) \
	func(DHCP, dhcp, na)

#include <config_distro_bootcmd.h>

#define CONFIG_EXTRA_ENV_SETTINGS	\
	"scriptaddr=0x4d00000\0"	\
	"pxefile_addr_r=0x4e00000\0"	\
	"fdt_addr_r=0x4f00000\0"	\
	"kernel_addr_r=0x5000000\0"	\
	"ramdisk_addr_r=0x8000000\0"	\
	"fdtfile=marvell/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
	BOOTENV

#endif /* _CONFIG_MVEBU_ARMADA_8K_H */
Commit	Line	Data
83d290c5	1	/* SPDX-License-Identifier: GPL-2.0+ */
6f8c2d49 SR	2	/*
6f8c2d49 SR	3	* Copyright (C) 2016 Stefan Roese <[email protected]>
6f8c2d49 SR	4	*/
6f8c2d49 SR	5
633fa0e7 SR	6	#ifndef _CONFIG_MVEBU_ARMADA_8K_H
633fa0e7 SR	7	#define _CONFIG_MVEBU_ARMADA_8K_H
6f8c2d49 SR	8
	9	/*
	10	* High Level Configuration Options (easy to change)
	11	*/
	12	#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
	13
6f8c2d49 SR	14	/* additions for new ARM relocation support */
	15	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	16
6f8c2d49	17	/* auto boot */
6f8c2d49	18
6f8c2d49 SR	19	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
	20	115200, 230400, 460800, 921600 }
	21
	22	/*
	23	* For booting Linux, the board info and command line data
	24	* have to be in the first 8 MB of memory, since this is
	25	* the maximum mapped by the Linux kernel during initialization.
	26	*/
	27	#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
	28	#define CONFIG_INITRD_TAG /* enable INITRD tag */
	29	#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
	30
	31	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */
6f8c2d49 SR	32
	33	/*
	34	* Size of malloc() pool
	35	*/
	36	#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MiB for malloc() */
	37
	38	/*
	39	* Other required minimal configurations
	40	*/
6f8c2d49 SR	41	#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
	42	#define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */
	43	#define CONFIG_SYS_MEMTEST_END 0x00ffffff /(_16M -1) /
	44	#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
	45	#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
	46
6f8c2d49 SR	47	/* End of 16M scrubbed by training in bootrom */
	48	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000)
	49
6f8c2d49 SR	50	#define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */
	51	#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
	52	#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */
	53
7e1d3220 BS	54	/* When runtime detection fails this is the default */
	55	#define CONFIG_SYS_MMC_ENV_DEV 0
	56
f59472e8 KP	57	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	58	#define CONFIG_SYS_NAND_MAX_CHIPS 1
	59	#define CONFIG_SYS_NAND_ONFI_DETECTION
f59472e8	60
def84429 SR	61	/*
	62	* Ethernet Driver configuration
	63	*/
	64	#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
def84429 SR	65	#define CONFIG_ARP_TIMEOUT 200
	66	#define CONFIG_NET_RETRY_COUNT 50
	67
cbb89ed0	68	#define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
6f8c2d49 SR	69
6f8c2d49 SR	70	/* USB ethernet */
6f8c2d49 SR	71
	72	/*
	73	* SATA/SCSI/AHCI configuration
	74	*/
6f8c2d49	75	#define CONFIG_SCSI_AHCI_PLAT
6f8c2d49 SR	76	#define CONFIG_LBA48
	77	#define CONFIG_SYS_64BIT_LBA
	78
	79	#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
	80	#define CONFIG_SYS_SCSI_MAX_LUN 1
	81	#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
	82	CONFIG_SYS_SCSI_MAX_LUN)
	83
1ec5aa63 SR	84	/*
	85	* PCI configuration
	86	*/
	87	#ifdef CONFIG_PCIE_DW_MVEBU
	88	#define CONFIG_E1000
1ec5aa63 SR	89	#endif
1ec5aa63 SR	90
bdca661e MK	91	#define BOOT_TARGET_DEVICES(func) \
	92	func(MMC, mmc, 1) \
	93	func(MMC, mmc, 0) \
	94	func(USB, usb, 0) \
	95	func(SCSI, scsi, 0) \
	96	func(PXE, pxe, na) \
	97	func(DHCP, dhcp, na)
	98
	99	#include <config_distro_bootcmd.h>
	100
	101	#define CONFIG_EXTRA_ENV_SETTINGS \
	102	"scriptaddr=0x4d00000\0" \
	103	"pxefile_addr_r=0x4e00000\0" \
	104	"fdt_addr_r=0x4f00000\0" \
	105	"kernel_addr_r=0x5000000\0" \
	106	"ramdisk_addr_r=0x8000000\0" \
	107	"fdtfile=marvell/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
	108	BOOTENV
	109
633fa0e7	110	#endif /* _CONFIG_MVEBU_ARMADA_8K_H */