[u-boot.git] / include / configs / zynq-common.h

/*
 * (C) Copyright 2012 Michal Simek <[email protected]>
 * (C) Copyright 2013 Xilinx, Inc.
 *
 * Common configuration options for all Zynq boards.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_ZYNQ_COMMON_H
#define __CONFIG_ZYNQ_COMMON_H

/* High Level configuration Options */
#define CONFIG_ARMV7

/* CPU clock */
#ifndef CONFIG_CPU_FREQ_HZ
# define CONFIG_CPU_FREQ_HZ	800000000
#endif

/* Cache options */
#define CONFIG_CMD_CACHE
#define CONFIG_SYS_CACHELINE_SIZE	32

#define CONFIG_SYS_L2CACHE_OFF
#ifndef CONFIG_SYS_L2CACHE_OFF
# define CONFIG_SYS_L2_PL310
# define CONFIG_SYS_PL310_BASE		0xf8f02000
#endif

/* Serial drivers */
#define CONFIG_BAUDRATE		115200
/* The following table includes the supported baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE  \
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}

/* DCC driver */
#if defined(CONFIG_ZYNQ_DCC)
# define CONFIG_ARM_DCC
# define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */
#else
# define CONFIG_ZYNQ_SERIAL
#endif

/* Ethernet driver */
#if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1)
# define CONFIG_NET_MULTI
# define CONFIG_ZYNQ_GEM
# define CONFIG_MII
# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
# define CONFIG_PHYLIB
# define CONFIG_PHY_MARVELL
#endif

/* SPI */
#ifdef CONFIG_ZYNQ_SPI
# define CONFIG_SPI_FLASH
# define CONFIG_SPI_FLASH_SST
# define CONFIG_CMD_SF
#endif

/* NOR */
#ifndef CONFIG_SYS_NO_FLASH
# define CONFIG_SYS_FLASH_BASE		0xE2000000
# define CONFIG_SYS_FLASH_SIZE		(16 * 1024 * 1024)
# define CONFIG_SYS_MAX_FLASH_BANKS	1
# define CONFIG_SYS_MAX_FLASH_SECT	512
# define CONFIG_SYS_FLASH_ERASE_TOUT	1000
# define CONFIG_SYS_FLASH_WRITE_TOUT	5000
# define CONFIG_FLASH_SHOW_PROGRESS	10
# define CONFIG_SYS_FLASH_CFI
# undef CONFIG_SYS_FLASH_EMPTY_INFO
# define CONFIG_FLASH_CFI_DRIVER
# undef CONFIG_SYS_FLASH_PROTECTION
# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
#endif

/* MMC */
#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
# define CONFIG_MMC
# define CONFIG_GENERIC_MMC
# define CONFIG_SDHCI
# define CONFIG_ZYNQ_SDHCI
# define CONFIG_CMD_MMC
#endif

#ifdef CONFIG_ZYNQ_USB
# define CONFIG_USB_EHCI
# define CONFIG_CMD_USB
# define CONFIG_USB_STORAGE
# define CONFIG_USB_EHCI_ZYNQ
# define CONFIG_USB_ULPI_VIEWPORT
# define CONFIG_USB_ULPI
# define CONFIG_EHCI_IS_TDI
# define CONFIG_USB_MAX_CONTROLLER_COUNT	2
#endif

#if defined(CONFIG_ZYNQ_SDHCI) || defined(CONFIG_ZYNQ_USB)
# define CONFIG_SUPPORT_VFAT
# define CONFIG_CMD_FAT
# define CONFIG_CMD_EXT2
# define CONFIG_FAT_WRITE
# define CONFIG_DOS_PARTITION
# define CONFIG_CMD_EXT4
# define CONFIG_CMD_EXT4_WRITE
#endif

#define CONFIG_SYS_I2C_ZYNQ
/* I2C */
#if defined(CONFIG_SYS_I2C_ZYNQ)
# define CONFIG_CMD_I2C
# define CONFIG_SYS_I2C
# define CONFIG_SYS_I2C_ZYNQ_SPEED		100000
# define CONFIG_SYS_I2C_ZYNQ_SLAVE		0
#endif

/* EEPROM */
#ifdef CONFIG_ZYNQ_EEPROM
# define CONFIG_CMD_EEPROM
# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
# define CONFIG_SYS_I2C_EEPROM_ADDR		0x54
# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
# define CONFIG_SYS_EEPROM_SIZE			1024 /* Bytes */
#endif

#define CONFIG_BOOTP_SERVERIP
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_MAY_FAIL

/* Total Size of Environment Sector */
#define CONFIG_ENV_SIZE			(128 << 10)

/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE

/* Environment */
#ifndef CONFIG_ENV_IS_NOWHERE
# ifndef CONFIG_SYS_NO_FLASH
#  define CONFIG_ENV_IS_IN_FLASH
# elif defined(CONFIG_SYS_NO_FLASH)
#  define CONFIG_ENV_IS_NOWHERE
# endif

# define CONFIG_ENV_SECT_SIZE		CONFIG_ENV_SIZE
# define CONFIG_ENV_OFFSET		0xE0000
# define CONFIG_CMD_SAVEENV
#endif

/* Default environment */
#define CONFIG_EXTRA_ENV_SETTINGS	\
	"fit_image=fit.itb\0"		\
	"load_addr=0x2000000\0"		\
	"fit_size=0x800000\0"		\
	"flash_off=0x100000\0"		\
	"nor_flash_off=0xE2100000\0"	\
	"fdt_high=0x20000000\0"		\
	"initrd_high=0x20000000\0"	\
	"norboot=echo Copying FIT from NOR flash to RAM... && " \
		"cp.b ${nor_flash_off} ${load_addr} ${fit_size} && " \
		"bootm ${load_addr}\0" \
	"sdboot=echo Copying FIT from SD to RAM... && " \
		"fatload mmc 0 ${load_addr} ${fit_image} && " \
		"bootm ${load_addr}\0" \
	"jtagboot=echo TFTPing FIT to RAM... && " \
		"tftpboot ${load_addr} ${fit_image} && " \
		"bootm ${load_addr}\0" \
	"usbboot=if usb start; then " \
			"echo Copying FIT from USB to RAM... && " \
			"fatload usb 0 ${load_addr} ${fit_image} && " \
			"bootm ${load_addr}\0" \
		"fi\0"

#define CONFIG_BOOTCOMMAND		"run $modeboot"
#define CONFIG_BOOTDELAY		3 /* -1 to Disable autoboot */
#define CONFIG_SYS_LOAD_ADDR		0 /* default? */

/* Miscellaneous configurable options */
#define CONFIG_SYS_PROMPT		"zynq-uboot> "
#define CONFIG_SYS_HUSH_PARSER

#define CONFIG_CMDLINE_EDITING
#define CONFIG_AUTO_COMPLETE
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_SYS_LONGHELP
#define CONFIG_CLOCKS
#define CONFIG_CMD_CLK
#define CONFIG_SYS_MAXARGS		32 /* max number of command args */
#define CONFIG_SYS_CBSIZE		256 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					sizeof(CONFIG_SYS_PROMPT) + 16)

/* Physical Memory map */
#define CONFIG_SYS_TEXT_BASE		0x4000000

#define CONFIG_NR_DRAM_BANKS		1
#define CONFIG_SYS_SDRAM_BASE		0

#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x1000)

#define CONFIG_SYS_MALLOC_LEN		0x400000
#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_INIT_RAM_SIZE	CONFIG_SYS_MALLOC_LEN
#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
					CONFIG_SYS_INIT_RAM_SIZE - \
					GENERATED_GBL_DATA_SIZE)

/* Enable the PL to be downloaded */
#define CONFIG_FPGA
#define CONFIG_FPGA_XILINX
#define CONFIG_FPGA_ZYNQPL
#define CONFIG_CMD_FPGA
#define CONFIG_CMD_FPGA_LOADMK
#define CONFIG_CMD_FPGA_LOADP
#define CONFIG_CMD_FPGA_LOADBP
#define CONFIG_CMD_FPGA_LOADFS

/* Open Firmware flat tree */
#define CONFIG_OF_LIBFDT

/* FIT support */
#define CONFIG_FIT
#define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
#define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */

/* FDT support */
#define CONFIG_DISPLAY_BOARDINFO_LATE

/* RSA support */
#define CONFIG_FIT_SIGNATURE
#define CONFIG_RSA

/* Extend size of kernel image for uncompression */
#define CONFIG_SYS_BOOTM_LEN	(60 * 1024 * 1024)

/* Boot FreeBSD/vxWorks from an ELF image */
#if defined(CONFIG_ZYNQ_BOOT_FREEBSD)
# define CONFIG_API
# define CONFIG_CMD_ELF
# define CONFIG_SYS_MMC_MAX_DEVICE	1
#endif

#define CONFIG_SYS_LDSCRIPT  "arch/arm/cpu/armv7/zynq/u-boot.lds"

/* Commands */
#include <config_cmd_default.h>

#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_CMD_TFTPPUT

/* SPL part */
#define CONFIG_CMD_SPL
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_BOARD_INIT

#define CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/armv7/zynq/u-boot-spl.lds"

/* MMC support */
#ifdef CONFIG_ZYNQ_SDHCI0
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x200 /* 256 KB */
#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION    1
#define CONFIG_SPL_LIBDISK_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME     "u-boot-dtb.img"
#endif

/* Disable dcache for SPL just for sure */
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_DCACHE_OFF
#undef CONFIG_FPGA
#endif

/* Address in RAM where the parameters must be copied by SPL. */
#define CONFIG_SYS_SPL_ARGS_ADDR	0x10000000

#define CONFIG_SPL_FAT_LOAD_ARGS_NAME		"system.dtb"
#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME		"uImage"

/* Not using MMC raw mode - just for compilation purpose */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	0
#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0

/* qspi mode is working fine */
#ifdef CONFIG_ZYNQ_QSPI
#define CONFIG_SPL_SPI_SUPPORT
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SPL_SPI_FLASH_SUPPORT
#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x100000
#endif

/* for booting directly linux */
#define CONFIG_SPL_OS_BOOT

/* SP location before relocation, must use scratch RAM */
#define CONFIG_SPL_TEXT_BASE	0x0

/* 3 * 64kB blocks of OCM - one is on the top because of bootrom */
#define CONFIG_SPL_MAX_SIZE	0x30000

/* The highest 64k OCM address */
#define OCM_HIGH_ADDR	0xffff0000

/* Just define any reasonable size */
#define CONFIG_SPL_STACK_SIZE	0x1000

/* SPL stack position - and stack goes down */
#define CONFIG_SPL_STACK	(OCM_HIGH_ADDR + CONFIG_SPL_STACK_SIZE)

/* On the top of OCM space */
#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_STACK + \
					 GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_SPL_MALLOC_SIZE	0x1000

/* BSS setup */
#define CONFIG_SPL_BSS_START_ADDR	0x100000
#define CONFIG_SPL_BSS_MAX_SIZE		0x100000

#define CONFIG_SYS_UBOOT_START	CONFIG_SYS_TEXT_BASE

#define CONFIG_SYS_GENERIC_BOARD

#endif /* __CONFIG_ZYNQ_COMMON_H */
Commit	Line	Data
f22651cf MS	1	/*
f22651cf MS	2	* (C) Copyright 2012 Michal Simek <[email protected]>
06fe8dae JT	3	* (C) Copyright 2013 Xilinx, Inc.
	4	*
	5	* Common configuration options for all Zynq boards.
f22651cf	6	*
1a459660	7	* SPDX-License-Identifier: GPL-2.0+
f22651cf MS	8	*/
f22651cf MS	9
06fe8dae JT	10	#ifndef __CONFIG_ZYNQ_COMMON_H
06fe8dae JT	11	#define __CONFIG_ZYNQ_COMMON_H
f22651cf	12
53e49f74 JT	13	/* High Level configuration Options */
53e49f74 JT	14	#define CONFIG_ARMV7
f22651cf MS	15
f22651cf MS	16	/* CPU clock */
53e49f74 JT	17	#ifndef CONFIG_CPU_FREQ_HZ
	18	# define CONFIG_CPU_FREQ_HZ 800000000
	19	#endif
f22651cf	20
8cfac504 JT	21	/* Cache options */
	22	#define CONFIG_CMD_CACHE
	23	#define CONFIG_SYS_CACHELINE_SIZE 32
	24
	25	#define CONFIG_SYS_L2CACHE_OFF
	26	#ifndef CONFIG_SYS_L2CACHE_OFF
	27	# define CONFIG_SYS_L2_PL310
	28	# define CONFIG_SYS_PL310_BASE 0xf8f02000
	29	#endif
	30
53e49f74 JT	31	/* Serial drivers */
53e49f74 JT	32	#define CONFIG_BAUDRATE 115200
f22651cf MS	33	/* The following table includes the supported baudrates */
	34	#define CONFIG_SYS_BAUDRATE_TABLE \
	35	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
	36
53e49f74 JT	37	/* DCC driver */
	38	#if defined(CONFIG_ZYNQ_DCC)
	39	# define CONFIG_ARM_DCC
	40	# define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */
bf834950 MS	41	#else
bf834950 MS	42	# define CONFIG_ZYNQ_SERIAL
53e49f74 JT	43	#endif
53e49f74 JT	44
f22651cf	45	/* Ethernet driver */
88fcfb1c JT	46	#if defined(CONFIG_ZYNQ_GEM0) \|\| defined(CONFIG_ZYNQ_GEM1)
	47	# define CONFIG_NET_MULTI
	48	# define CONFIG_ZYNQ_GEM
	49	# define CONFIG_MII
	50	# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
	51	# define CONFIG_PHYLIB
	52	# define CONFIG_PHY_MARVELL
	53	#endif
f22651cf	54
53e49f74 JT	55	/* SPI */
	56	#ifdef CONFIG_ZYNQ_SPI
	57	# define CONFIG_SPI_FLASH
	58	# define CONFIG_SPI_FLASH_SST
	59	# define CONFIG_CMD_SF
	60	#endif
	61
fe5eddbf JT	62	/* NOR */
	63	#ifndef CONFIG_SYS_NO_FLASH
	64	# define CONFIG_SYS_FLASH_BASE 0xE2000000
	65	# define CONFIG_SYS_FLASH_SIZE (16 * 1024 * 1024)
	66	# define CONFIG_SYS_MAX_FLASH_BANKS 1
	67	# define CONFIG_SYS_MAX_FLASH_SECT 512
	68	# define CONFIG_SYS_FLASH_ERASE_TOUT 1000
	69	# define CONFIG_SYS_FLASH_WRITE_TOUT 5000
	70	# define CONFIG_FLASH_SHOW_PROGRESS 10
	71	# define CONFIG_SYS_FLASH_CFI
	72	# undef CONFIG_SYS_FLASH_EMPTY_INFO
	73	# define CONFIG_FLASH_CFI_DRIVER
	74	# undef CONFIG_SYS_FLASH_PROTECTION
	75	# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
	76	#endif
	77
293eb33f MS	78	/* MMC */
	79	#if defined(CONFIG_ZYNQ_SDHCI0) \|\| defined(CONFIG_ZYNQ_SDHCI1)
	80	# define CONFIG_MMC
	81	# define CONFIG_GENERIC_MMC
	82	# define CONFIG_SDHCI
	83	# define CONFIG_ZYNQ_SDHCI
	84	# define CONFIG_CMD_MMC
293eb33f MS	85	#endif
293eb33f MS	86
c6024c8e SDPP	87	#ifdef CONFIG_ZYNQ_USB
	88	# define CONFIG_USB_EHCI
	89	# define CONFIG_CMD_USB
	90	# define CONFIG_USB_STORAGE
c6024c8e SDPP	91	# define CONFIG_USB_EHCI_ZYNQ
	92	# define CONFIG_USB_ULPI_VIEWPORT
	93	# define CONFIG_USB_ULPI
	94	# define CONFIG_EHCI_IS_TDI
	95	# define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	96	#endif
	97
47b35a51	98	#if defined(CONFIG_ZYNQ_SDHCI) \|\| defined(CONFIG_ZYNQ_USB)
293eb33f	99	# define CONFIG_SUPPORT_VFAT
47b35a51	100	# define CONFIG_CMD_FAT
293eb33f	101	# define CONFIG_CMD_EXT2
47b35a51	102	# define CONFIG_FAT_WRITE
293eb33f	103	# define CONFIG_DOS_PARTITION
2e38a906 SDPP	104	# define CONFIG_CMD_EXT4
2e38a906 SDPP	105	# define CONFIG_CMD_EXT4_WRITE
293eb33f MS	106	#endif
293eb33f MS	107
18948632	108	#define CONFIG_SYS_I2C_ZYNQ
8934f784	109	/* I2C */
18948632	110	#if defined(CONFIG_SYS_I2C_ZYNQ)
8934f784	111	# define CONFIG_CMD_I2C
0bdffe71	112	# define CONFIG_SYS_I2C
0bdffe71	113	# define CONFIG_SYS_I2C_ZYNQ_SPEED 100000
18948632	114	# define CONFIG_SYS_I2C_ZYNQ_SLAVE 0
8934f784 MS	115	#endif
8934f784 MS	116
65da1efd JT	117	/* EEPROM */
	118	#ifdef CONFIG_ZYNQ_EEPROM
	119	# define CONFIG_CMD_EEPROM
	120	# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	121	# define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
	122	# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
	123	# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
	124	# define CONFIG_SYS_EEPROM_SIZE 1024 /* Bytes */
	125	#endif
	126
f22651cf MS	127	#define CONFIG_BOOTP_SERVERIP
	128	#define CONFIG_BOOTP_BOOTPATH
	129	#define CONFIG_BOOTP_GATEWAY
	130	#define CONFIG_BOOTP_HOSTNAME
	131	#define CONFIG_BOOTP_MAY_FAIL
	132
18eee22f JT	133	/* Total Size of Environment Sector */
	134	#define CONFIG_ENV_SIZE (128 << 10)
	135
b660ca13 JT	136	/* Allow to overwrite serial and ethaddr */
	137	#define CONFIG_ENV_OVERWRITE
	138
f22651cf	139	/* Environment */
ed53e4d6 JT	140	#ifndef CONFIG_ENV_IS_NOWHERE
	141	# ifndef CONFIG_SYS_NO_FLASH
	142	# define CONFIG_ENV_IS_IN_FLASH
	143	# elif defined(CONFIG_SYS_NO_FLASH)
	144	# define CONFIG_ENV_IS_NOWHERE
	145	# endif
	146
	147	# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
	148	# define CONFIG_ENV_OFFSET 0xE0000
	149	# define CONFIG_CMD_SAVEENV
	150	#endif
e83f61a6 JT	151
	152	/* Default environment */
	153	#define CONFIG_EXTRA_ENV_SETTINGS \
	154	"fit_image=fit.itb\0" \
	155	"load_addr=0x2000000\0" \
	156	"fit_size=0x800000\0" \
	157	"flash_off=0x100000\0" \
	158	"nor_flash_off=0xE2100000\0" \
	159	"fdt_high=0x20000000\0" \
	160	"initrd_high=0x20000000\0" \
	161	"norboot=echo Copying FIT from NOR flash to RAM... && " \
	162	"cp.b ${nor_flash_off} ${load_addr} ${fit_size} && " \
	163	"bootm ${load_addr}\0" \
	164	"sdboot=echo Copying FIT from SD to RAM... && " \
	165	"fatload mmc 0 ${load_addr} ${fit_image} && " \
	166	"bootm ${load_addr}\0" \
	167	"jtagboot=echo TFTPing FIT to RAM... && " \
dfa94058	168	"tftpboot ${load_addr} ${fit_image} && " \
c6024c8e SDPP	169	"bootm ${load_addr}\0" \
	170	"usbboot=if usb start; then " \
	171	"echo Copying FIT from USB to RAM... && " \
	172	"fatload usb 0 ${load_addr} ${fit_image} && " \
	173	"bootm ${load_addr}\0" \
	174	"fi\0"
	175
e83f61a6 JT	176	#define CONFIG_BOOTCOMMAND "run $modeboot"
	177	#define CONFIG_BOOTDELAY 3 /* -1 to Disable autoboot */
	178	#define CONFIG_SYS_LOAD_ADDR 0 /* default? */
f22651cf	179
36e0e197 JT	180	/* Miscellaneous configurable options */
	181	#define CONFIG_SYS_PROMPT "zynq-uboot> "
	182	#define CONFIG_SYS_HUSH_PARSER
	183
	184	#define CONFIG_CMDLINE_EDITING
	185	#define CONFIG_AUTO_COMPLETE
b3de9249	186	#define CONFIG_BOARD_LATE_INIT
36e0e197	187	#define CONFIG_SYS_LONGHELP
6c3e61de	188	#define CONFIG_CLOCKS
d6c9bbaa	189	#define CONFIG_CMD_CLK
841426ad	190	#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
36e0e197 JT	191	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
36e0e197 JT	192	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
f22651cf MS	193	sizeof(CONFIG_SYS_PROMPT) + 16)
f22651cf MS	194
7cd04192	195	/* Physical Memory map */
0f5c2156	196	#define CONFIG_SYS_TEXT_BASE 0x4000000
f22651cf	197
7cd04192 JT	198	#define CONFIG_NR_DRAM_BANKS 1
7cd04192 JT	199	#define CONFIG_SYS_SDRAM_BASE 0
7cd04192 JT	200
	201	#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
	202	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000)
	203
53e49f74	204	#define CONFIG_SYS_MALLOC_LEN 0x400000
7cd04192 JT	205	#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE
	206	#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN
	207	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
	208	CONFIG_SYS_INIT_RAM_SIZE - \
	209	GENERATED_GBL_DATA_SIZE)
53e49f74 JT	210
	211	/* Enable the PL to be downloaded */
	212	#define CONFIG_FPGA
	213	#define CONFIG_FPGA_XILINX
	214	#define CONFIG_FPGA_ZYNQPL
	215	#define CONFIG_CMD_FPGA
64e809af	216	#define CONFIG_CMD_FPGA_LOADMK
26ea9ce5 MS	217	#define CONFIG_CMD_FPGA_LOADP
26ea9ce5 MS	218	#define CONFIG_CMD_FPGA_LOADBP
1a897668	219	#define CONFIG_CMD_FPGA_LOADFS
53e49f74 JT	220
	221	/* Open Firmware flat tree */
	222	#define CONFIG_OF_LIBFDT
	223
	224	/* FIT support */
f22651cf	225	#define CONFIG_FIT
773590eb	226	#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
21d29f7f	227	#define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */
f22651cf	228
f8f36c5d	229	/* FDT support */
f8f36c5d JT	230	#define CONFIG_DISPLAY_BOARDINFO_LATE
f8f36c5d JT	231
a8826eb4 JT	232	/* RSA support */
	233	#define CONFIG_FIT_SIGNATURE
	234	#define CONFIG_RSA
	235
ae9f4899	236	/* Extend size of kernel image for uncompression */
3d456eec	237	#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)
ae9f4899	238
09ed635b JT	239	/* Boot FreeBSD/vxWorks from an ELF image */
	240	#if defined(CONFIG_ZYNQ_BOOT_FREEBSD)
	241	# define CONFIG_API
	242	# define CONFIG_CMD_ELF
	243	# define CONFIG_SYS_MMC_MAX_DEVICE 1
	244	#endif
	245
38716189 MS	246	#define CONFIG_SYS_LDSCRIPT "arch/arm/cpu/armv7/zynq/u-boot.lds"
38716189 MS	247
f22651cf MS	248	/* Commands */
	249	#include <config_cmd_default.h>
	250
	251	#define CONFIG_CMD_PING
	252	#define CONFIG_CMD_DHCP
	253	#define CONFIG_CMD_MII
427b2d4e	254	#define CONFIG_CMD_TFTPPUT
f22651cf	255
d7e269cf	256	/* SPL part */
d7e269cf MS	257	#define CONFIG_CMD_SPL
	258	#define CONFIG_SPL_FRAMEWORK
	259	#define CONFIG_SPL_LIBCOMMON_SUPPORT
	260	#define CONFIG_SPL_LIBGENERIC_SUPPORT
	261	#define CONFIG_SPL_SERIAL_SUPPORT
1540fb72	262	#define CONFIG_SPL_BOARD_INIT
d7e269cf MS	263
	264	#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/zynq/u-boot-spl.lds"
	265
d7e269cf MS	266	/* MMC support */
	267	#ifdef CONFIG_ZYNQ_SDHCI0
	268	#define CONFIG_SPL_MMC_SUPPORT
	269	#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
	270	#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
	271	#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
	272	#define CONFIG_SPL_LIBDISK_SUPPORT
	273	#define CONFIG_SPL_FAT_SUPPORT
783e6a72	274	#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot-dtb.img"
0dfbcf02 MY	275	#endif
	276
	277	/* Disable dcache for SPL just for sure */
	278	#ifdef CONFIG_SPL_BUILD
	279	#define CONFIG_SYS_DCACHE_OFF
	280	#undef CONFIG_FPGA
d7e269cf MS	281	#endif
	282
	283	/* Address in RAM where the parameters must be copied by SPL. */
	284	#define CONFIG_SYS_SPL_ARGS_ADDR 0x10000000
	285
	286	#define CONFIG_SPL_FAT_LOAD_ARGS_NAME "system.dtb"
	287	#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME "uImage"
	288
	289	/* Not using MMC raw mode - just for compilation purpose */
	290	#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0
	291	#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0
	292	#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0
	293
	294	/* qspi mode is working fine */
	295	#ifdef CONFIG_ZYNQ_QSPI
	296	#define CONFIG_SPL_SPI_SUPPORT
	297	#define CONFIG_SPL_SPI_LOAD
	298	#define CONFIG_SPL_SPI_FLASH_SUPPORT
d7e269cf	299	#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x100000
d7e269cf MS	300	#endif
	301
	302	/* for booting directly linux */
	303	#define CONFIG_SPL_OS_BOOT
	304
	305	/* SP location before relocation, must use scratch RAM */
	306	#define CONFIG_SPL_TEXT_BASE 0x0
	307
	308	/* 3 * 64kB blocks of OCM - one is on the top because of bootrom */
	309	#define CONFIG_SPL_MAX_SIZE 0x30000
	310
	311	/* The highest 64k OCM address */
	312	#define OCM_HIGH_ADDR 0xffff0000
	313
	314	/* Just define any reasonable size */
	315	#define CONFIG_SPL_STACK_SIZE 0x1000
	316
	317	/* SPL stack position - and stack goes down */
	318	#define CONFIG_SPL_STACK (OCM_HIGH_ADDR + CONFIG_SPL_STACK_SIZE)
	319
	320	/* On the top of OCM space */
	321	#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_STACK + \
	322	GENERATED_GBL_DATA_SIZE)
	323	#define CONFIG_SYS_SPL_MALLOC_SIZE 0x1000
	324
	325	/* BSS setup */
	326	#define CONFIG_SPL_BSS_START_ADDR 0x100000
	327	#define CONFIG_SPL_BSS_MAX_SIZE 0x100000
	328
	329	#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
f22651cf	330
2b257216 MS	331	#define CONFIG_SYS_GENERIC_BOARD
2b257216 MS	332
06fe8dae	333	#endif /* __CONFIG_ZYNQ_COMMON_H */