[u-boot.git] / include / configs / mx7dsabresd.h

/*
 * Copyright (C) 2015 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the Freescale i.MX7D SABRESD board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __MX7D_SABRESD_CONFIG_H
#define __MX7D_SABRESD_CONFIG_H

#include "mx7_common.h"

#define CONFIG_DBG_MONITOR
#define PHYS_SDRAM_SIZE			SZ_1G

#define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(32 * SZ_1M)

/* Network */
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define CONFIG_FEC_XCV_TYPE             RGMII
#define CONFIG_ETHPRIME                 "FEC"
#define CONFIG_FEC_MXC_PHYADDR          0

#define CONFIG_PHYLIB
#define CONFIG_PHY_BROADCOM
/* ENET1 */
#define IMX_FEC_BASE			ENET_IPS_BASE_ADDR

/* MMC Config*/
#define CONFIG_SYS_FSL_ESDHC_ADDR       0

#undef CONFIG_BOOTM_NETBSD
#undef CONFIG_BOOTM_PLAN9
#undef CONFIG_BOOTM_RTEMS

/* I2C configs */
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED		100000

#define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
#define CONFIG_SYS_MMC_IMG_LOAD_PART	1

#ifdef CONFIG_IMX_BOOTAUX
/* Set to QSPI1 A flash at default */
#define CONFIG_SYS_AUXCORE_BOOTDATA 0x60000000

#define UPDATE_M4_ENV \
	"m4image=m4_qspi.bin\0" \
	"loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
	"update_m4_from_sd=" \
		"if sf probe 0:0; then " \
			"if run loadm4image; then " \
				"setexpr fw_sz ${filesize} + 0xffff; " \
				"setexpr fw_sz ${fw_sz} / 0x10000; "	\
				"setexpr fw_sz ${fw_sz} * 0x10000; "	\
				"sf erase 0x0 ${fw_sz}; " \
				"sf write ${loadaddr} 0x0 ${filesize}; " \
			"fi; " \
		"fi\0" \
	"m4boot=sf probe 0:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
#else
#define UPDATE_M4_ENV ""
#endif

#define CONFIG_MFG_ENV_SETTINGS \
	"mfgtool_args=setenv bootargs console=${console},${baudrate} " \
		"rdinit=/linuxrc " \
		"g_mass_storage.stall=0 g_mass_storage.removable=1 " \
		"g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
		"g_mass_storage.iSerialNumber=\"\" "\
		"clk_ignore_unused "\
		"\0" \
	"initrd_addr=0x83800000\0" \
	"initrd_high=0xffffffff\0" \
	"bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \

#define CONFIG_DFU_ENV_SETTINGS \
	"dfu_alt_info=image raw 0 0x800000;"\
		"u-boot raw 0 0x4000;"\
		"bootimg part 0 1;"\
		"rootfs part 0 2\0" \

#define CONFIG_EXTRA_ENV_SETTINGS \
	UPDATE_M4_ENV \
	CONFIG_MFG_ENV_SETTINGS \
	CONFIG_DFU_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=zImage\0" \
	"console=ttymxc0\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"fdt_file=imx7d-sdb.dtb\0" \
	"fdt_addr=0x83000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	"mmcautodetect=yes\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript=" \
		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
		"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0"

#define CONFIG_BOOTCOMMAND \
	   "mmc dev ${mmcdev};" \
	   "mmc dev ${mmcdev}; if mmc rescan; then " \
		   "if run loadbootscript; then " \
			   "run bootscript; " \
		   "else " \
			   "if run loadimage; then " \
				   "run mmcboot; " \
			   "else run netboot; " \
			   "fi; " \
		   "fi; " \
	   "else run netboot; fi"

#define CONFIG_SYS_MEMTEST_START	0x80000000
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x20000000)

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
#define CONFIG_SYS_HZ			1000

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* environment organization */
#define CONFIG_ENV_SIZE			SZ_8K

/*
 * If want to use nand, define CONFIG_NAND_MXS and rework board
 * to support nand, since emmc has pin conflicts with nand
 */
#ifdef CONFIG_NAND_MXS
/* NAND stuff */
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		0x40000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION

/* DMA stuff, needed for GPMI/MXS NAND support */
#define CONFIG_APBH_DMA
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8
#endif

#define CONFIG_ENV_OFFSET		(12 * SZ_64K)
#ifdef CONFIG_NAND_MXS
#define CONFIG_SYS_FSL_USDHC_NUM	1
#else
#define CONFIG_SYS_FSL_USDHC_NUM	2
#endif

#define CONFIG_SYS_MMC_ENV_DEV		0   /* USDHC1 */
#define CONFIG_SYS_MMC_ENV_PART		0	/* user area */
#define CONFIG_MMCROOT			"/dev/mmcblk0p2"  /* USDHC1 */

/* USB Configs */
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)

#define CONFIG_IMX_THERMAL

#define CONFIG_USBD_HS

#define CONFIG_USB_FUNCTION_MASS_STORAGE

#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_MXS
#define CONFIG_VIDEO_LOGO
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#endif

#ifdef CONFIG_FSL_QSPI
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_MACRONIX
#define CONFIG_SPI_FLASH_BAR
#define CONFIG_SF_DEFAULT_BUS		0
#define CONFIG_SF_DEFAULT_CS		0
#define CONFIG_SF_DEFAULT_SPEED		40000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
#define FSL_QSPI_FLASH_NUM		1
#define FSL_QSPI_FLASH_SIZE		SZ_64M
#define QSPI0_BASE_ADDR			QSPI1_IPS_BASE_ADDR
#define QSPI0_AMBA_BASE			QSPI0_ARB_BASE_ADDR
#endif

#endif	/* __CONFIG_H */
Commit	Line	Data
1a8150d4 AA	1	/*
	2	* Copyright (C) 2015 Freescale Semiconductor, Inc.
	3	*
	4	* Configuration settings for the Freescale i.MX7D SABRESD board.
	5	*
	6	* SPDX-License-Identifier: GPL-2.0+
	7	*/
	8
	9	#ifndef __MX7D_SABRESD_CONFIG_H
	10	#define __MX7D_SABRESD_CONFIG_H
	11
	12	#include "mx7_common.h"
	13
	14	#define CONFIG_DBG_MONITOR
	15	#define PHYS_SDRAM_SIZE SZ_1G
	16
5d69269d FE	17	#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR
5d69269d FE	18
6baa2616 FE	19	/* Size of malloc() pool */
	20	#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M)
	21
1a8150d4	22	/* Network */
1a8150d4 AA	23	#define CONFIG_FEC_MXC
	24	#define CONFIG_MII
	25	#define CONFIG_FEC_XCV_TYPE RGMII
	26	#define CONFIG_ETHPRIME "FEC"
	27	#define CONFIG_FEC_MXC_PHYADDR 0
	28
	29	#define CONFIG_PHYLIB
	30	#define CONFIG_PHY_BROADCOM
1a8150d4 AA	31	/* ENET1 */
	32	#define IMX_FEC_BASE ENET_IPS_BASE_ADDR
	33
	34	/* MMC Config*/
	35	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	36
1a8150d4 AA	37	#undef CONFIG_BOOTM_NETBSD
	38	#undef CONFIG_BOOTM_PLAN9
	39	#undef CONFIG_BOOTM_RTEMS
	40
1a8150d4	41	/* I2C configs */
1a8150d4	42	#define CONFIG_SYS_I2C_MXC
1a8150d4 AA	43	#define CONFIG_SYS_I2C_SPEED 100000
	44
	45	#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
	46	#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
	47
79e355fb PF	48	#ifdef CONFIG_IMX_BOOTAUX
	49	/* Set to QSPI1 A flash at default */
	50	#define CONFIG_SYS_AUXCORE_BOOTDATA 0x60000000
79e355fb PF	51
	52	#define UPDATE_M4_ENV \
	53	"m4image=m4_qspi.bin\0" \
	54	"loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
	55	"update_m4_from_sd=" \
	56	"if sf probe 0:0; then " \
	57	"if run loadm4image; then " \
	58	"setexpr fw_sz ${filesize} + 0xffff; " \
	59	"setexpr fw_sz ${fw_sz} / 0x10000; " \
	60	"setexpr fw_sz ${fw_sz} * 0x10000; " \
	61	"sf erase 0x0 ${fw_sz}; " \
	62	"sf write ${loadaddr} 0x0 ${filesize}; " \
	63	"fi; " \
	64	"fi\0" \
	65	"m4boot=sf probe 0:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
	66	#else
	67	#define UPDATE_M4_ENV ""
	68	#endif
	69
1a8150d4 AA	70	#define CONFIG_MFG_ENV_SETTINGS \
	71	"mfgtool_args=setenv bootargs console=${console},${baudrate} " \
	72	"rdinit=/linuxrc " \
	73	"g_mass_storage.stall=0 g_mass_storage.removable=1 " \
	74	"g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
	75	"g_mass_storage.iSerialNumber=\"\" "\
	76	"clk_ignore_unused "\
	77	"\0" \
	78	"initrd_addr=0x83800000\0" \
	79	"initrd_high=0xffffffff\0" \
	80	"bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
	81
73f1b80c TJL	82	#define CONFIG_DFU_ENV_SETTINGS \
	83	"dfu_alt_info=image raw 0 0x800000;"\
	84	"u-boot raw 0 0x4000;"\
	85	"bootimg part 0 1;"\
	86	"rootfs part 0 2\0" \
	87
1a8150d4	88	#define CONFIG_EXTRA_ENV_SETTINGS \
79e355fb	89	UPDATE_M4_ENV \
1a8150d4	90	CONFIG_MFG_ENV_SETTINGS \
73f1b80c	91	CONFIG_DFU_ENV_SETTINGS \
1a8150d4 AA	92	"script=boot.scr\0" \
	93	"image=zImage\0" \
	94	"console=ttymxc0\0" \
	95	"fdt_high=0xffffffff\0" \
	96	"initrd_high=0xffffffff\0" \
	97	"fdt_file=imx7d-sdb.dtb\0" \
	98	"fdt_addr=0x83000000\0" \
	99	"boot_fdt=try\0" \
	100	"ip_dyn=yes\0" \
ebe517b6	101	"videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
1a8150d4 AA	102	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
	103	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
	104	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	105	"mmcautodetect=yes\0" \
	106	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	107	"root=${mmcroot}\0" \
	108	"loadbootscript=" \
	109	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	110	"bootscript=echo Running bootscript from mmc ...; " \
	111	"source\0" \
	112	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	113	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	114	"mmcboot=echo Booting from mmc ...; " \
	115	"run mmcargs; " \
	116	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	117	"if run loadfdt; then " \
	118	"bootz ${loadaddr} - ${fdt_addr}; " \
	119	"else " \
	120	"if test ${boot_fdt} = try; then " \
	121	"bootz; " \
	122	"else " \
	123	"echo WARN: Cannot load the DT; " \
	124	"fi; " \
	125	"fi; " \
	126	"else " \
	127	"bootz; " \
	128	"fi;\0" \
	129	"netargs=setenv bootargs console=${console},${baudrate} " \
	130	"root=/dev/nfs " \
	131	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	132	"netboot=echo Booting from net ...; " \
	133	"run netargs; " \
	134	"if test ${ip_dyn} = yes; then " \
	135	"setenv get_cmd dhcp; " \
	136	"else " \
	137	"setenv get_cmd tftp; " \
	138	"fi; " \
	139	"${get_cmd} ${image}; " \
	140	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	141	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
	142	"bootz ${loadaddr} - ${fdt_addr}; " \
	143	"else " \
	144	"if test ${boot_fdt} = try; then " \
	145	"bootz; " \
	146	"else " \
	147	"echo WARN: Cannot load the DT; " \
	148	"fi; " \
	149	"fi; " \
	150	"else " \
	151	"bootz; " \
	152	"fi;\0"
	153
	154	#define CONFIG_BOOTCOMMAND \
	155	"mmc dev ${mmcdev};" \
	156	"mmc dev ${mmcdev}; if mmc rescan; then " \
	157	"if run loadbootscript; then " \
	158	"run bootscript; " \
	159	"else " \
	160	"if run loadimage; then " \
	161	"run mmcboot; " \
	162	"else run netboot; " \
	163	"fi; " \
	164	"fi; " \
	165	"else run netboot; fi"
166
1a8150d4 AA	167	#define CONFIG_SYS_MEMTEST_START 0x80000000
	168	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x20000000)
	169
	170	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	171	#define CONFIG_SYS_HZ 1000
	172
1a8150d4 AA	173	/* Physical Memory Map */
	174	#define CONFIG_NR_DRAM_BANKS 1
	175	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	176
	177	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	178	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	179	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	180
	181	#define CONFIG_SYS_INIT_SP_OFFSET \
	182	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	183	#define CONFIG_SYS_INIT_SP_ADDR \
	184	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	185
e856bdcf	186	/* environment organization */
1a8150d4	187	#define CONFIG_ENV_SIZE SZ_8K
6e1a41cd PF	188
	189	/*
	190	* If want to use nand, define CONFIG_NAND_MXS and rework board
	191	* to support nand, since emmc has pin conflicts with nand
	192	*/
	193	#ifdef CONFIG_NAND_MXS
6e1a41cd PF	194	/* NAND stuff */
	195	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	196	#define CONFIG_SYS_NAND_BASE 0x40000000
	197	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	198	#define CONFIG_SYS_NAND_ONFI_DETECTION
	199
	200	/* DMA stuff, needed for GPMI/MXS NAND support */
	201	#define CONFIG_APBH_DMA
	202	#define CONFIG_APBH_DMA_BURST
	203	#define CONFIG_APBH_DMA_BURST8
	204	#endif
	205
da384fc6	206	#define CONFIG_ENV_OFFSET (12 * SZ_64K)
6e1a41cd PF	207	#ifdef CONFIG_NAND_MXS
	208	#define CONFIG_SYS_FSL_USDHC_NUM 1
	209	#else
1a8150d4	210	#define CONFIG_SYS_FSL_USDHC_NUM 2
6e1a41cd	211	#endif
1a8150d4 AA	212
	213	#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */
	214	#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */
	215	#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */
	216
1a8150d4	217	/* USB Configs */
1a8150d4 AA	218	#define CONFIG_USB_HOST_ETHER
	219	#define CONFIG_USB_ETHER_ASIX
	220	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
1a8150d4 AA	221
	222	#define CONFIG_IMX_THERMAL
	223
73f1b80c	224	#define CONFIG_USBD_HS
73f1b80c	225
73f1b80c	226	#define CONFIG_USB_FUNCTION_MASS_STORAGE
73f1b80c	227
ebe517b6	228	#ifdef CONFIG_VIDEO
ebe517b6 PF	229	#define CONFIG_VIDEO_MXS
ebe517b6 PF	230	#define CONFIG_VIDEO_LOGO
ebe517b6 PF	231	#define CONFIG_SPLASH_SCREEN
ebe517b6 PF	232	#define CONFIG_SPLASH_SCREEN_ALIGN
ebe517b6 PF	233	#define CONFIG_BMP_16BPP
	234	#define CONFIG_VIDEO_BMP_RLE8
	235	#define CONFIG_VIDEO_BMP_LOGO
	236	#endif
	237
53cc647d	238	#ifdef CONFIG_FSL_QSPI
53cc647d PF	239	#define CONFIG_SPI_FLASH
	240	#define CONFIG_SPI_FLASH_MACRONIX
	241	#define CONFIG_SPI_FLASH_BAR
	242	#define CONFIG_SF_DEFAULT_BUS 0
	243	#define CONFIG_SF_DEFAULT_CS 0
	244	#define CONFIG_SF_DEFAULT_SPEED 40000000
	245	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	246	#define FSL_QSPI_FLASH_NUM 1
	247	#define FSL_QSPI_FLASH_SIZE SZ_64M
	248	#define QSPI0_BASE_ADDR QSPI1_IPS_BASE_ADDR
	249	#define QSPI0_AMBA_BASE QSPI0_ARB_BASE_ADDR
	250	#endif
	251
1a8150d4	252	#endif /* __CONFIG_H */