projects / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 49249e13 PA |
1 | /* |
| 2 | * Copyright 2010-2011 Freescale Semiconductor, Inc. | |
| 3 | * | |
| 1a459660 | 4 | * SPDX-License-Identifier: GPL-2.0+ |
| 49249e13 PA |
5 | */ |
| 6 | ||
| 7 | /* | |
| 8 | * P010 RDB board configuration file | |
| 9 | */ | |
| 10 | ||
| 11 | #ifndef __CONFIG_H | |
| 12 | #define __CONFIG_H | |
| 13 | ||
| 14 | #ifdef CONFIG_36BIT | |
| 15 | #define CONFIG_PHYS_64BIT | |
| 16 | #endif | |
| 653c28f3 | 17 | #define CONFIG_DISPLAY_BOARDINFO |
| 49249e13 | 18 | |
| 49249e13 | 19 | #define CONFIG_P1010 |
| 74fa22ed PK |
20 | #define CONFIG_E500 /* BOOKE e500 family */ |
| 21 | #include <asm/config_mpc85xx.h> | |
| d793e5a8 | 22 | #define CONFIG_NAND_FSL_IFC |
| 49249e13 PA |
23 | |
| 24 | #ifdef CONFIG_SDCARD | |
| c9e1f588 YZ |
25 | #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT |
| 26 | #define CONFIG_SPL_DRIVERS_MISC_SUPPORT | |
| 27 | #define CONFIG_SPL_ENV_SUPPORT | |
| 28 | #define CONFIG_SPL_SERIAL_SUPPORT | |
| 29 | #define CONFIG_SPL_MMC_SUPPORT | |
| 30 | #define CONFIG_SPL_MMC_MINIMAL | |
| 31 | #define CONFIG_SPL_FLUSH_IMAGE | |
| 32 | #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" | |
| 33 | #define CONFIG_SPL_LIBGENERIC_SUPPORT | |
| 34 | #define CONFIG_SPL_LIBCOMMON_SUPPORT | |
| 35 | #define CONFIG_SPL_I2C_SUPPORT | |
| 36 | #define CONFIG_FSL_LAW /* Use common FSL init code */ | |
| 37 | #define CONFIG_SYS_TEXT_BASE 0x11001000 | |
| 38 | #define CONFIG_SPL_TEXT_BASE 0xD0001000 | |
| 39 | #define CONFIG_SPL_PAD_TO 0x18000 | |
| 40 | #define CONFIG_SPL_MAX_SIZE (96 * 1024) | |
| 41 | #define CONFIG_SYS_MMC_U_BOOT_SIZE (512 << 10) | |
| 42 | #define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) | |
| 43 | #define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) | |
| 44 | #define CONFIG_SYS_MMC_U_BOOT_OFFS (96 << 10) | |
| 45 | #define CONFIG_SYS_MPC85XX_NO_RESETVEC | |
| 46 | #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" | |
| 47 | #define CONFIG_SPL_MMC_BOOT | |
| 48 | #ifdef CONFIG_SPL_BUILD | |
| 49 | #define CONFIG_SPL_COMMON_INIT_DDR | |
| 50 | #endif | |
| 49249e13 PA |
51 | #endif |
| 52 | ||
| 53 | #ifdef CONFIG_SPIFLASH | |
| c9e1f588 | 54 | #ifdef CONFIG_SECURE_BOOT |
| 49249e13 PA |
55 | #define CONFIG_RAMBOOT_SPIFLASH |
| 56 | #define CONFIG_SYS_TEXT_BASE 0x11000000 | |
| 84e0fb40 | 57 | #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc |
| c9e1f588 | 58 | #else |
| c9e1f588 YZ |
59 | #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT |
| 60 | #define CONFIG_SPL_DRIVERS_MISC_SUPPORT | |
| 61 | #define CONFIG_SPL_ENV_SUPPORT | |
| 62 | #define CONFIG_SPL_SERIAL_SUPPORT | |
| 63 | #define CONFIG_SPL_SPI_SUPPORT | |
| 64 | #define CONFIG_SPL_SPI_FLASH_SUPPORT | |
| 65 | #define CONFIG_SPL_SPI_FLASH_MINIMAL | |
| 66 | #define CONFIG_SPL_FLUSH_IMAGE | |
| 67 | #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" | |
| 68 | #define CONFIG_SPL_LIBGENERIC_SUPPORT | |
| 69 | #define CONFIG_SPL_LIBCOMMON_SUPPORT | |
| 70 | #define CONFIG_SPL_I2C_SUPPORT | |
| 71 | #define CONFIG_FSL_LAW /* Use common FSL init code */ | |
| 72 | #define CONFIG_SYS_TEXT_BASE 0x11001000 | |
| 73 | #define CONFIG_SPL_TEXT_BASE 0xD0001000 | |
| 74 | #define CONFIG_SPL_PAD_TO 0x18000 | |
| 75 | #define CONFIG_SPL_MAX_SIZE (96 * 1024) | |
| 76 | #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (512 << 10) | |
| 77 | #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) | |
| 78 | #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) | |
| 79 | #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (96 << 10) | |
| 80 | #define CONFIG_SYS_MPC85XX_NO_RESETVEC | |
| 81 | #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" | |
| 82 | #define CONFIG_SPL_SPI_BOOT | |
| 83 | #ifdef CONFIG_SPL_BUILD | |
| 84 | #define CONFIG_SPL_COMMON_INIT_DDR | |
| 85 | #endif | |
| 86 | #endif | |
| 49249e13 PA |
87 | #endif |
| 88 | ||
| 0fa934d2 | 89 | #ifdef CONFIG_NAND |
| c9e1f588 | 90 | #ifdef CONFIG_SECURE_BOOT |
| 0fa934d2 PK |
91 | #define CONFIG_SPL_INIT_MINIMAL |
| 92 | #define CONFIG_SPL_SERIAL_SUPPORT | |
| 93 | #define CONFIG_SPL_NAND_SUPPORT | |
| fbe76ae4 | 94 | #define CONFIG_SPL_NAND_BOOT |
| 0fa934d2 PK |
95 | #define CONFIG_SPL_FLUSH_IMAGE |
| 96 | #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" | |
| 97 | ||
| 98 | #define CONFIG_SYS_TEXT_BASE 0x00201000 | |
| 99 | #define CONFIG_SPL_TEXT_BASE 0xFFFFE000 | |
| 100 | #define CONFIG_SPL_MAX_SIZE 8192 | |
| 101 | #define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000 | |
| 102 | #define CONFIG_SPL_RELOC_STACK 0x00100000 | |
| e222b1f3 | 103 | #define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) |
| 0fa934d2 PK |
104 | #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) |
| 105 | #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 | |
| 106 | #define CONFIG_SYS_NAND_U_BOOT_OFFS 0 | |
| 107 | #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" | |
| c9e1f588 | 108 | #else |
| c9e1f588 YZ |
109 | #ifdef CONFIG_TPL_BUILD |
| 110 | #define CONFIG_SPL_NAND_BOOT | |
| 111 | #define CONFIG_SPL_FLUSH_IMAGE | |
| 112 | #define CONFIG_SPL_ENV_SUPPORT | |
| 113 | #define CONFIG_SPL_NAND_INIT | |
| 114 | #define CONFIG_SPL_SERIAL_SUPPORT | |
| 115 | #define CONFIG_SPL_LIBGENERIC_SUPPORT | |
| 116 | #define CONFIG_SPL_LIBCOMMON_SUPPORT | |
| 117 | #define CONFIG_SPL_I2C_SUPPORT | |
| 118 | #define CONFIG_SPL_NAND_SUPPORT | |
| 119 | #define CONFIG_SPL_DRIVERS_MISC_SUPPORT | |
| 120 | #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT | |
| 121 | #define CONFIG_SPL_COMMON_INIT_DDR | |
| 122 | #define CONFIG_SPL_MAX_SIZE (128 << 10) | |
| 123 | #define CONFIG_SPL_TEXT_BASE 0xD0001000 | |
| 124 | #define CONFIG_SYS_MPC85XX_NO_RESETVEC | |
| 125 | #define CONFIG_SYS_NAND_U_BOOT_SIZE (576 << 10) | |
| 126 | #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) | |
| 127 | #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) | |
| 128 | #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) | |
| 129 | #elif defined(CONFIG_SPL_BUILD) | |
| 130 | #define CONFIG_SPL_INIT_MINIMAL | |
| 131 | #define CONFIG_SPL_SERIAL_SUPPORT | |
| 132 | #define CONFIG_SPL_NAND_SUPPORT | |
| 133 | #define CONFIG_SPL_NAND_MINIMAL | |
| 134 | #define CONFIG_SPL_FLUSH_IMAGE | |
| 135 | #define CONFIG_SPL_TEXT_BASE 0xff800000 | |
| 136 | #define CONFIG_SPL_MAX_SIZE 8192 | |
| 137 | #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) | |
| 138 | #define CONFIG_SYS_NAND_U_BOOT_DST 0xD0000000 | |
| 139 | #define CONFIG_SYS_NAND_U_BOOT_START 0xD0000000 | |
| 140 | #define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) | |
| 141 | #endif | |
| 142 | #define CONFIG_SPL_PAD_TO 0x20000 | |
| 143 | #define CONFIG_TPL_PAD_TO 0x20000 | |
| 144 | #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" | |
| 145 | #define CONFIG_SYS_TEXT_BASE 0x11001000 | |
| 146 | #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" | |
| 147 | #endif | |
| d793e5a8 | 148 | #endif |
| 2f439e80 RG |
149 | |
| 150 | #ifdef CONFIG_NAND_SECBOOT /* NAND Boot */ | |
| 151 | #define CONFIG_RAMBOOT_NAND | |
| 152 | #define CONFIG_SYS_TEXT_BASE 0x11000000 | |
| e222b1f3 | 153 | #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc |
| 2f439e80 RG |
154 | #endif |
| 155 | ||
| 49249e13 | 156 | #ifndef CONFIG_SYS_TEXT_BASE |
| e222b1f3 | 157 | #define CONFIG_SYS_TEXT_BASE 0xeff40000 |
| 49249e13 PA |
158 | #endif |
| 159 | ||
| 160 | #ifndef CONFIG_RESET_VECTOR_ADDRESS | |
| 161 | #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc | |
| 162 | #endif | |
| 163 | ||
| 0fa934d2 PK |
164 | #ifdef CONFIG_SPL_BUILD |
| 165 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE | |
| 166 | #else | |
| 167 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ | |
| 49249e13 PA |
168 | #endif |
| 169 | ||
| 170 | /* High Level Configuration Options */ | |
| 171 | #define CONFIG_BOOKE /* BOOKE */ | |
| 172 | #define CONFIG_E500 /* BOOKE e500 family */ | |
| 49249e13 | 173 | #define CONFIG_FSL_IFC /* Enable IFC Support */ |
| 737537ef | 174 | #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ |
| 49249e13 PA |
175 | #define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ |
| 176 | ||
| 177 | #define CONFIG_PCI /* Enable PCI/PCIE */ | |
| 178 | #if defined(CONFIG_PCI) | |
| 179 | #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ | |
| 180 | #define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */ | |
| 181 | #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ | |
| 842033e6 | 182 | #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ |
| 49249e13 PA |
183 | #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ |
| 184 | #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ | |
| 185 | ||
| 49249e13 PA |
186 | #define CONFIG_CMD_PCI |
| 187 | ||
| 49249e13 PA |
188 | |
| 189 | /* | |
| 190 | * PCI Windows | |
| 191 | * Memory space is mapped 1-1, but I/O space must start from 0. | |
| 192 | */ | |
| 193 | /* controller 1, Slot 1, tgtid 1, Base address a000 */ | |
| 194 | #define CONFIG_SYS_PCIE1_NAME "mini PCIe Slot" | |
| 195 | #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 | |
| 196 | #ifdef CONFIG_PHYS_64BIT | |
| 197 | #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 | |
| 198 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull | |
| 199 | #else | |
| 200 | #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 | |
| 201 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 | |
| 202 | #endif | |
| 203 | #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ | |
| 204 | #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 | |
| 205 | #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 | |
| 206 | #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ | |
| 207 | #ifdef CONFIG_PHYS_64BIT | |
| 208 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull | |
| 209 | #else | |
| 210 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000 | |
| 211 | #endif | |
| 212 | ||
| 213 | /* controller 2, Slot 2, tgtid 2, Base address 9000 */ | |
| e512c50b | 214 | #if defined(CONFIG_P1010RDB_PA) |
| 49249e13 | 215 | #define CONFIG_SYS_PCIE2_NAME "PCIe Slot" |
| e512c50b SL |
216 | #elif defined(CONFIG_P1010RDB_PB) |
| 217 | #define CONFIG_SYS_PCIE2_NAME "mini PCIe Slot" | |
| 218 | #endif | |
| 49249e13 PA |
219 | #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 |
| 220 | #ifdef CONFIG_PHYS_64BIT | |
| 221 | #define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 | |
| 222 | #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull | |
| 223 | #else | |
| 224 | #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 | |
| 225 | #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 | |
| 226 | #endif | |
| 227 | #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ | |
| 228 | #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 | |
| 229 | #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 | |
| 230 | #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ | |
| 231 | #ifdef CONFIG_PHYS_64BIT | |
| 232 | #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull | |
| 233 | #else | |
| 234 | #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 | |
| 235 | #endif | |
| 236 | ||
| 237 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ | |
| 238 | ||
| 239 | #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ | |
| 240 | #define CONFIG_DOS_PARTITION | |
| 241 | #endif | |
| 242 | ||
| 243 | #define CONFIG_FSL_LAW /* Use common FSL init code */ | |
| 244 | #define CONFIG_TSEC_ENET | |
| 245 | #define CONFIG_ENV_OVERWRITE | |
| 246 | ||
| 247 | #define CONFIG_DDR_CLK_FREQ 66666666 /* DDRCLK on P1010 RDB */ | |
| 248 | #define CONFIG_SYS_CLK_FREQ 66666666 /* SYSCLK for P1010 RDB */ | |
| 249 | ||
| 49249e13 | 250 | #define CONFIG_MISC_INIT_R |
| 49249e13 PA |
251 | #define CONFIG_HWCONFIG |
| 252 | /* | |
| 253 | * These can be toggled for performance analysis, otherwise use default. | |
| 254 | */ | |
| 255 | #define CONFIG_L2_CACHE /* toggle L2 cache */ | |
| 256 | #define CONFIG_BTB /* toggle branch predition */ | |
| 257 | ||
| 258 | #define CONFIG_ADDR_STREAMING /* toggle addr streaming */ | |
| 259 | ||
| 260 | #define CONFIG_ENABLE_36BIT_PHYS | |
| 261 | ||
| 262 | #ifdef CONFIG_PHYS_64BIT | |
| 263 | #define CONFIG_ADDR_MAP 1 | |
| 264 | #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ | |
| 265 | #endif | |
| 266 | ||
| c3cc02af | 267 | #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ |
| 49249e13 PA |
268 | #define CONFIG_SYS_MEMTEST_END 0x1fffffff |
| 269 | #define CONFIG_PANIC_HANG /* do not reset board on panic */ | |
| 270 | ||
| 271 | /* DDR Setup */ | |
| 5614e71b | 272 | #define CONFIG_SYS_FSL_DDR3 |
| 1ba62f10 | 273 | #define CONFIG_SYS_DDR_RAW_TIMING |
| 49249e13 PA |
274 | #define CONFIG_DDR_SPD |
| 275 | #define CONFIG_SYS_SPD_BUS_NUM 1 | |
| 276 | #define SPD_EEPROM_ADDRESS 0x52 | |
| 277 | ||
| 278 | #define CONFIG_MEM_INIT_VALUE 0xDeadBeef | |
| 279 | ||
| 280 | #ifndef __ASSEMBLY__ | |
| 281 | extern unsigned long get_sdram_size(void); | |
| 282 | #endif | |
| 283 | #define CONFIG_SYS_SDRAM_SIZE get_sdram_size() /* DDR size */ | |
| 284 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 | |
| 285 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE | |
| 286 | ||
| 287 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 | |
| 288 | #define CONFIG_CHIP_SELECTS_PER_CTRL 1 | |
| 289 | ||
| 290 | /* DDR3 Controller Settings */ | |
| 291 | #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f | |
| 292 | #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302 | |
| 293 | #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 | |
| 294 | #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef | |
| 295 | #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 | |
| 296 | #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 | |
| 297 | #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 | |
| 49249e13 PA |
298 | #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 |
| 299 | #define CONFIG_SYS_DDR_SR_CNTR 0x00000000 | |
| 300 | #define CONFIG_SYS_DDR_RCW_1 0x00000000 | |
| 301 | #define CONFIG_SYS_DDR_RCW_2 0x00000000 | |
| e512c50b SL |
302 | #define CONFIG_SYS_DDR_CONTROL 0xc70c0008 /* Type = DDR3 */ |
| 303 | #define CONFIG_SYS_DDR_CONTROL_2 0x24401000 | |
| 49249e13 PA |
304 | #define CONFIG_SYS_DDR_TIMING_4 0x00000001 |
| 305 | #define CONFIG_SYS_DDR_TIMING_5 0x03402400 | |
| 306 | ||
| e512c50b SL |
307 | #define CONFIG_SYS_DDR_TIMING_3_800 0x00030000 |
| 308 | #define CONFIG_SYS_DDR_TIMING_0_800 0x00110104 | |
| 309 | #define CONFIG_SYS_DDR_TIMING_1_800 0x6f6b8644 | |
| 49249e13 PA |
310 | #define CONFIG_SYS_DDR_TIMING_2_800 0x0FA888CF |
| 311 | #define CONFIG_SYS_DDR_CLK_CTRL_800 0x03000000 | |
| e512c50b SL |
312 | #define CONFIG_SYS_DDR_MODE_1_800 0x00441420 |
| 313 | #define CONFIG_SYS_DDR_MODE_2_800 0x00000000 | |
| 49249e13 | 314 | #define CONFIG_SYS_DDR_INTERVAL_800 0x0C300100 |
| e512c50b | 315 | #define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8675f608 |
| 49249e13 PA |
316 | |
| 317 | /* settings for DDR3 at 667MT/s */ | |
| 318 | #define CONFIG_SYS_DDR_TIMING_3_667 0x00010000 | |
| 319 | #define CONFIG_SYS_DDR_TIMING_0_667 0x00110004 | |
| 320 | #define CONFIG_SYS_DDR_TIMING_1_667 0x5d59e544 | |
| 321 | #define CONFIG_SYS_DDR_TIMING_2_667 0x0FA890CD | |
| 322 | #define CONFIG_SYS_DDR_CLK_CTRL_667 0x03000000 | |
| 323 | #define CONFIG_SYS_DDR_MODE_1_667 0x00441210 | |
| 324 | #define CONFIG_SYS_DDR_MODE_2_667 0x00000000 | |
| 325 | #define CONFIG_SYS_DDR_INTERVAL_667 0x0a280000 | |
| 326 | #define CONFIG_SYS_DDR_WRLVL_CONTROL_667 0x8675F608 | |
| 327 | ||
| 328 | #define CONFIG_SYS_CCSRBAR 0xffe00000 | |
| 329 | #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR | |
| 330 | ||
| d793e5a8 | 331 | /* Don't relocate CCSRBAR while in NAND_SPL */ |
| 0fa934d2 | 332 | #ifdef CONFIG_SPL_BUILD |
| d793e5a8 DD |
333 | #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE |
| 334 | #endif | |
| 335 | ||
| 49249e13 PA |
336 | /* |
| 337 | * Memory map | |
| 338 | * | |
| 339 | * 0x0000_0000 0x3fff_ffff DDR 1G cacheable | |
| 340 | * 0x8000_0000 0xbfff_ffff PCI Express Mem 1.5G non-cacheable | |
| 341 | * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable | |
| 342 | * | |
| 343 | * Localbus non-cacheable | |
| 344 | * 0xff80_0000 0xff8f_ffff NAND Flash 1M non-cacheable | |
| 345 | * 0xffb0_0000 0xffbf_ffff Board CPLD 1M non-cacheable | |
| 346 | * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 | |
| 347 | * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable | |
| 348 | */ | |
| 349 | ||
| 49249e13 PA |
350 | /* |
| 351 | * IFC Definitions | |
| 352 | */ | |
| 353 | /* NOR Flash on IFC */ | |
| 0fa934d2 PK |
354 | #ifdef CONFIG_SPL_BUILD |
| 355 | #define CONFIG_SYS_NO_FLASH | |
| 356 | #endif | |
| 357 | ||
| 49249e13 PA |
358 | #define CONFIG_SYS_FLASH_BASE 0xee000000 |
| 359 | #define CONFIG_SYS_MAX_FLASH_SECT 256 /* 32M */ | |
| 360 | ||
| 361 | #ifdef CONFIG_PHYS_64BIT | |
| 362 | #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) | |
| 363 | #else | |
| 364 | #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE | |
| 365 | #endif | |
| 366 | ||
| 367 | #define CONFIG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ | |
| 368 | CSPR_PORT_SIZE_16 | \ | |
| 369 | CSPR_MSEL_NOR | \ | |
| 370 | CSPR_V) | |
| 371 | #define CONFIG_SYS_NOR_AMASK IFC_AMASK(32*1024*1024) | |
| 372 | #define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(7) | |
| 373 | /* NOR Flash Timing Params */ | |
| 374 | #define CONFIG_SYS_NOR_FTIM0 FTIM0_NOR_TACSE(0x4) | \ | |
| 375 | FTIM0_NOR_TEADC(0x5) | \ | |
| 376 | FTIM0_NOR_TEAHC(0x5) | |
| 377 | #define CONFIG_SYS_NOR_FTIM1 FTIM1_NOR_TACO(0x1e) | \ | |
| 378 | FTIM1_NOR_TRAD_NOR(0x0f) | |
| 379 | #define CONFIG_SYS_NOR_FTIM2 FTIM2_NOR_TCS(0x4) | \ | |
| 380 | FTIM2_NOR_TCH(0x4) | \ | |
| 381 | FTIM2_NOR_TWP(0x1c) | |
| 382 | #define CONFIG_SYS_NOR_FTIM3 0x0 | |
| 383 | ||
| 384 | #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} | |
| 385 | #define CONFIG_SYS_FLASH_QUIET_TEST | |
| 386 | #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ | |
| 387 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ | |
| 388 | ||
| 389 | #undef CONFIG_SYS_FLASH_CHECKSUM | |
| 390 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ | |
| 391 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ | |
| 392 | ||
| 393 | /* CFI for NOR Flash */ | |
| 394 | #define CONFIG_FLASH_CFI_DRIVER | |
| 395 | #define CONFIG_SYS_FLASH_CFI | |
| 396 | #define CONFIG_SYS_FLASH_EMPTY_INFO | |
| 397 | #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE | |
| 398 | ||
| 399 | /* NAND Flash on IFC */ | |
| 400 | #define CONFIG_SYS_NAND_BASE 0xff800000 | |
| 401 | #ifdef CONFIG_PHYS_64BIT | |
| 402 | #define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull | |
| 403 | #else | |
| 404 | #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE | |
| 405 | #endif | |
| 406 | ||
| ac688078 ZQ |
407 | #define CONFIG_MTD_DEVICE |
| 408 | #define CONFIG_MTD_PARTITION | |
| 409 | #define CONFIG_CMD_MTDPARTS | |
| 410 | #define MTDIDS_DEFAULT "nand0=ff800000.flash" | |
| 411 | #define MTDPARTS_DEFAULT \ | |
| 412 | "mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)" | |
| 413 | ||
| 49249e13 PA |
414 | #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ |
| 415 | | CSPR_PORT_SIZE_8 \ | |
| 416 | | CSPR_MSEL_NAND \ | |
| 417 | | CSPR_V) | |
| 418 | #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) | |
| e512c50b SL |
419 | |
| 420 | #if defined(CONFIG_P1010RDB_PA) | |
| 49249e13 PA |
421 | #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ |
| 422 | | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ | |
| 423 | | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ | |
| 424 | | CSOR_NAND_RAL_2 /* RAL = 2 Bytes */ \ | |
| 425 | | CSOR_NAND_PGS_512 /* Page Size = 512b */ \ | |
| 426 | | CSOR_NAND_SPRZ_16 /* Spare size = 16 */ \ | |
| 427 | | CSOR_NAND_PB(32)) /* 32 Pages Per Block */ | |
| e512c50b SL |
428 | #define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) |
| 429 | ||
| 430 | #elif defined(CONFIG_P1010RDB_PB) | |
| 431 | #define CONFIG_SYS_NAND_ONFI_DETECTION | |
| 432 | #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ | |
| 433 | | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ | |
| 434 | | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ | |
| 435 | | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ | |
| 436 | | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ | |
| 437 | | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ | |
| 438 | | CSOR_NAND_PB(128)) /*Pages Per Block = 128 */ | |
| 439 | #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) | |
| 440 | #endif | |
| 49249e13 | 441 | |
| d793e5a8 DD |
442 | #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } |
| 443 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
| d793e5a8 | 444 | #define CONFIG_CMD_NAND |
| d793e5a8 | 445 | |
| e512c50b | 446 | #if defined(CONFIG_P1010RDB_PA) |
| 49249e13 PA |
447 | /* NAND Flash Timing Params */ |
| 448 | #define CONFIG_SYS_NAND_FTIM0 FTIM0_NAND_TCCST(0x01) | \ | |
| 449 | FTIM0_NAND_TWP(0x0C) | \ | |
| 450 | FTIM0_NAND_TWCHT(0x04) | \ | |
| 451 | FTIM0_NAND_TWH(0x05) | |
| 452 | #define CONFIG_SYS_NAND_FTIM1 FTIM1_NAND_TADLE(0x1d) | \ | |
| 453 | FTIM1_NAND_TWBE(0x1d) | \ | |
| 454 | FTIM1_NAND_TRR(0x07) | \ | |
| 455 | FTIM1_NAND_TRP(0x0c) | |
| 456 | #define CONFIG_SYS_NAND_FTIM2 FTIM2_NAND_TRAD(0x0c) | \ | |
| 457 | FTIM2_NAND_TREH(0x05) | \ | |
| 458 | FTIM2_NAND_TWHRE(0x0f) | |
| 459 | #define CONFIG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x04) | |
| 460 | ||
| e512c50b SL |
461 | #elif defined(CONFIG_P1010RDB_PB) |
| 462 | /* support MT29F16G08ABABAWP 4k-pagesize 2G-bytes NAND */ | |
| 463 | /* ONFI NAND Flash mode0 Timing Params */ | |
| 464 | #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07)| \ | |
| 465 | FTIM0_NAND_TWP(0x18) | \ | |
| 466 | FTIM0_NAND_TWCHT(0x07) | \ | |
| 467 | FTIM0_NAND_TWH(0x0a)) | |
| 468 | #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32)| \ | |
| 469 | FTIM1_NAND_TWBE(0x39) | \ | |
| 470 | FTIM1_NAND_TRR(0x0e) | \ | |
| 471 | FTIM1_NAND_TRP(0x18)) | |
| 472 | #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ | |
| 473 | FTIM2_NAND_TREH(0x0a) | \ | |
| 474 | FTIM2_NAND_TWHRE(0x1e)) | |
| 475 | #define CONFIG_SYS_NAND_FTIM3 0x0 | |
| 476 | #endif | |
| 477 | ||
| 49249e13 PA |
478 | #define CONFIG_SYS_NAND_DDR_LAW 11 |
| 479 | ||
| 480 | /* Set up IFC registers for boot location NOR/NAND */ | |
| 0fa934d2 | 481 | #if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT) |
| d793e5a8 DD |
482 | #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR |
| 483 | #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK | |
| 484 | #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR | |
| 485 | #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 | |
| 486 | #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 | |
| 487 | #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 | |
| 488 | #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 | |
| 489 | #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR | |
| 490 | #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK | |
| 491 | #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR | |
| 492 | #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 493 | #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 494 | #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 495 | #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 496 | #else | |
| 49249e13 PA |
497 | #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR |
| 498 | #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK | |
| 499 | #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR | |
| 500 | #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 501 | #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 502 | #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 503 | #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 504 | #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR | |
| 505 | #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK | |
| 506 | #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR | |
| 507 | #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 | |
| 508 | #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 | |
| 509 | #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 | |
| 510 | #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 | |
| d793e5a8 DD |
511 | #endif |
| 512 | ||
| 49249e13 PA |
513 | /* CPLD on IFC */ |
| 514 | #define CONFIG_SYS_CPLD_BASE 0xffb00000 | |
| 515 | ||
| 516 | #ifdef CONFIG_PHYS_64BIT | |
| 517 | #define CONFIG_SYS_CPLD_BASE_PHYS 0xfffb00000ull | |
| 518 | #else | |
| 519 | #define CONFIG_SYS_CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE | |
| 520 | #endif | |
| 521 | ||
| 522 | #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ | |
| 523 | | CSPR_PORT_SIZE_8 \ | |
| 524 | | CSPR_MSEL_GPCM \ | |
| 525 | | CSPR_V) | |
| 526 | #define CONFIG_SYS_AMASK3 IFC_AMASK(64*1024) | |
| 527 | #define CONFIG_SYS_CSOR3 0x0 | |
| 528 | /* CPLD Timing parameters for IFC CS3 */ | |
| 529 | #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ | |
| 530 | FTIM0_GPCM_TEADC(0x0e) | \ | |
| 531 | FTIM0_GPCM_TEAHC(0x0e)) | |
| 532 | #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ | |
| 533 | FTIM1_GPCM_TRAD(0x1f)) | |
| 534 | #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ | |
| de519163 | 535 | FTIM2_GPCM_TCH(0x8) | \ |
| 49249e13 PA |
536 | FTIM2_GPCM_TWP(0x1f)) |
| 537 | #define CONFIG_SYS_CS3_FTIM3 0x0 | |
| 49249e13 | 538 | |
| 76c9aaf5 AB |
539 | #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) || \ |
| 540 | defined(CONFIG_RAMBOOT_NAND) | |
| 49249e13 PA |
541 | #define CONFIG_SYS_RAMBOOT |
| 542 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
| 543 | #else | |
| 544 | #undef CONFIG_SYS_RAMBOOT | |
| 545 | #endif | |
| 546 | ||
| 74fa22ed | 547 | #ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399 |
| 50c76367 | 548 | #if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT) |
| 74fa22ed PK |
549 | #define CONFIG_A003399_NOR_WORKAROUND |
| 550 | #endif | |
| 551 | #endif | |
| 552 | ||
| 49249e13 PA |
553 | #define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */ |
| 554 | #define CONFIG_BOARD_EARLY_INIT_R | |
| 555 | ||
| 556 | #define CONFIG_SYS_INIT_RAM_LOCK | |
| 557 | #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ | |
| b39d1213 | 558 | #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* End of used area in RAM */ |
| 49249e13 | 559 | |
| b39d1213 | 560 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ |
| 49249e13 PA |
561 | - GENERATED_GBL_DATA_SIZE) |
| 562 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
| 563 | ||
| 9307cbab | 564 | #define CONFIG_SYS_MONITOR_LEN (768 * 1024) |
| 49249e13 PA |
565 | #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc*/ |
| 566 | ||
| c9e1f588 YZ |
567 | /* |
| 568 | * Config the L2 Cache as L2 SRAM | |
| 569 | */ | |
| 570 | #if defined(CONFIG_SPL_BUILD) | |
| 571 | #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) | |
| 572 | #define CONFIG_SYS_INIT_L2_ADDR 0xD0000000 | |
| 573 | #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR | |
| 574 | #define CONFIG_SYS_L2_SIZE (256 << 10) | |
| 575 | #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) | |
| 576 | #define CONFIG_SPL_RELOC_TEXT_BASE 0xD0001000 | |
| 577 | #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) | |
| 578 | #define CONFIG_SPL_RELOC_STACK_SIZE (16 << 10) | |
| 579 | #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024) | |
| 580 | #define CONFIG_SPL_RELOC_MALLOC_SIZE (128 << 10) | |
| 581 | #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 96 * 1024) | |
| 582 | #elif defined(CONFIG_NAND) | |
| 583 | #ifdef CONFIG_TPL_BUILD | |
| 584 | #define CONFIG_SYS_INIT_L2_ADDR 0xD0000000 | |
| 585 | #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR | |
| 586 | #define CONFIG_SYS_L2_SIZE (256 << 10) | |
| 587 | #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) | |
| 588 | #define CONFIG_SPL_RELOC_TEXT_BASE 0xD0001000 | |
| 589 | #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) | |
| 590 | #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) | |
| 591 | #define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) | |
| 592 | #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) | |
| 593 | #else | |
| 594 | #define CONFIG_SYS_INIT_L2_ADDR 0xD0000000 | |
| 595 | #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR | |
| 596 | #define CONFIG_SYS_L2_SIZE (256 << 10) | |
| 597 | #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) | |
| 598 | #define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x3000) | |
| 599 | #define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) | |
| 600 | #endif | |
| 601 | #endif | |
| 602 | #endif | |
| 603 | ||
| 49249e13 PA |
604 | /* Serial Port */ |
| 605 | #define CONFIG_CONS_INDEX 1 | |
| 606 | #undef CONFIG_SERIAL_SOFTWARE_FIFO | |
| 49249e13 PA |
607 | #define CONFIG_SYS_NS16550_SERIAL |
| 608 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
| 609 | #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) | |
| c9e1f588 | 610 | #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) |
| d793e5a8 DD |
611 | #define CONFIG_NS16550_MIN_FUNCTIONS |
| 612 | #endif | |
| 49249e13 | 613 | |
| 49249e13 PA |
614 | #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ |
| 615 | ||
| 616 | #define CONFIG_SYS_BAUDRATE_TABLE \ | |
| 617 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} | |
| 618 | ||
| 619 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) | |
| 620 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) | |
| 621 | ||
| 00f792e0 HS |
622 | /* I2C */ |
| 623 | #define CONFIG_SYS_I2C | |
| 624 | #define CONFIG_SYS_I2C_FSL | |
| 625 | #define CONFIG_SYS_FSL_I2C_SPEED 400000 | |
| 626 | #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F | |
| 627 | #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 | |
| 628 | #define CONFIG_SYS_FSL_I2C2_SPEED 400000 | |
| 629 | #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F | |
| 630 | #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 | |
| ad89da0c | 631 | #define I2C_PCA9557_ADDR1 0x18 |
| e512c50b | 632 | #define I2C_PCA9557_ADDR2 0x19 |
| ad89da0c | 633 | #define I2C_PCA9557_BUS_NUM 0 |
| 49249e13 PA |
634 | |
| 635 | /* I2C EEPROM */ | |
| e512c50b SL |
636 | #if defined(CONFIG_P1010RDB_PB) |
| 637 | #define CONFIG_ID_EEPROM | |
| 638 | #ifdef CONFIG_ID_EEPROM | |
| 639 | #define CONFIG_SYS_I2C_EEPROM_NXID | |
| 640 | #endif | |
| 641 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 | |
| 642 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 | |
| 643 | #define CONFIG_SYS_EEPROM_BUS_NUM 0 | |
| 644 | #define MAX_NUM_PORTS 9 /* for 128Bytes EEPROM */ | |
| 645 | #endif | |
| 49249e13 PA |
646 | /* enable read and write access to EEPROM */ |
| 647 | #define CONFIG_CMD_EEPROM | |
| 49249e13 PA |
648 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 |
| 649 | #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 | |
| 650 | #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 | |
| 651 | ||
| 652 | /* RTC */ | |
| 653 | #define CONFIG_RTC_PT7C4338 | |
| 654 | #define CONFIG_SYS_I2C_RTC_ADDR 0x68 | |
| 655 | ||
| 49249e13 PA |
656 | /* |
| 657 | * SPI interface will not be available in case of NAND boot SPI CS0 will be | |
| 658 | * used for SLIC | |
| 659 | */ | |
| 0fa934d2 | 660 | #if !defined(CONFIG_NAND) || !defined(CONFIG_NAND_SECBOOT) |
| 49249e13 | 661 | /* eSPI - Enhanced SPI */ |
| 49249e13 PA |
662 | #define CONFIG_SF_DEFAULT_SPEED 10000000 |
| 663 | #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 | |
| d793e5a8 | 664 | #endif |
| 49249e13 PA |
665 | |
| 666 | #if defined(CONFIG_TSEC_ENET) | |
| 49249e13 PA |
667 | #define CONFIG_MII /* MII PHY management */ |
| 668 | #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ | |
| 669 | #define CONFIG_TSEC1 1 | |
| 670 | #define CONFIG_TSEC1_NAME "eTSEC1" | |
| 671 | #define CONFIG_TSEC2 1 | |
| 672 | #define CONFIG_TSEC2_NAME "eTSEC2" | |
| 673 | #define CONFIG_TSEC3 1 | |
| 674 | #define CONFIG_TSEC3_NAME "eTSEC3" | |
| 675 | ||
| 676 | #define TSEC1_PHY_ADDR 1 | |
| 677 | #define TSEC2_PHY_ADDR 0 | |
| 678 | #define TSEC3_PHY_ADDR 2 | |
| 679 | ||
| 680 | #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) | |
| 681 | #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) | |
| 682 | #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) | |
| 683 | ||
| 684 | #define TSEC1_PHYIDX 0 | |
| 685 | #define TSEC2_PHYIDX 0 | |
| 686 | #define TSEC3_PHYIDX 0 | |
| 687 | ||
| 688 | #define CONFIG_ETHPRIME "eTSEC1" | |
| 689 | ||
| 690 | #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ | |
| 691 | ||
| 692 | /* TBI PHY configuration for SGMII mode */ | |
| 693 | #define CONFIG_TSEC_TBICR_SETTINGS ( \ | |
| 694 | TBICR_PHY_RESET \ | |
| 695 | | TBICR_ANEG_ENABLE \ | |
| 696 | | TBICR_FULL_DUPLEX \ | |
| 697 | | TBICR_SPEED1_SET \ | |
| 698 | ) | |
| 699 | ||
| 700 | #endif /* CONFIG_TSEC_ENET */ | |
| 701 | ||
| 702 | ||
| 703 | /* SATA */ | |
| 704 | #define CONFIG_FSL_SATA | |
| 9760b274 | 705 | #define CONFIG_FSL_SATA_V2 |
| 49249e13 PA |
706 | #define CONFIG_LIBATA |
| 707 | ||
| 708 | #ifdef CONFIG_FSL_SATA | |
| 709 | #define CONFIG_SYS_SATA_MAX_DEVICE 2 | |
| 710 | #define CONFIG_SATA1 | |
| 711 | #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR | |
| 712 | #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA | |
| 713 | #define CONFIG_SATA2 | |
| 714 | #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR | |
| 715 | #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA | |
| 716 | ||
| 717 | #define CONFIG_CMD_SATA | |
| 718 | #define CONFIG_LBA48 | |
| 719 | #endif /* #ifdef CONFIG_FSL_SATA */ | |
| 720 | ||
| 49249e13 | 721 | #define CONFIG_MMC |
| 49249e13 PA |
722 | #ifdef CONFIG_MMC |
| 723 | #define CONFIG_CMD_MMC | |
| 724 | #define CONFIG_DOS_PARTITION | |
| 725 | #define CONFIG_FSL_ESDHC | |
| 726 | #define CONFIG_GENERIC_MMC | |
| 727 | #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR | |
| 728 | #endif | |
| 729 | ||
| 730 | #define CONFIG_HAS_FSL_DR_USB | |
| 731 | ||
| 732 | #if defined(CONFIG_HAS_FSL_DR_USB) | |
| 733 | #define CONFIG_USB_EHCI | |
| 734 | ||
| 735 | #ifdef CONFIG_USB_EHCI | |
| 49249e13 PA |
736 | #define CONFIG_EHCI_HCD_INIT_AFTER_RESET |
| 737 | #define CONFIG_USB_EHCI_FSL | |
| 738 | #define CONFIG_USB_STORAGE | |
| 739 | #endif | |
| 740 | #endif | |
| 741 | ||
| 742 | /* | |
| 743 | * Environment | |
| 744 | */ | |
| c9e1f588 | 745 | #if defined(CONFIG_SDCARD) |
| 49249e13 | 746 | #define CONFIG_ENV_IS_IN_MMC |
| 4394d0c2 | 747 | #define CONFIG_FSL_FIXED_MMC_LOCATION |
| 49249e13 PA |
748 | #define CONFIG_SYS_MMC_ENV_DEV 0 |
| 749 | #define CONFIG_ENV_SIZE 0x2000 | |
| c9e1f588 | 750 | #elif defined(CONFIG_SPIFLASH) |
| 49249e13 PA |
751 | #define CONFIG_ENV_IS_IN_SPI_FLASH |
| 752 | #define CONFIG_ENV_SPI_BUS 0 | |
| 753 | #define CONFIG_ENV_SPI_CS 0 | |
| 754 | #define CONFIG_ENV_SPI_MAX_HZ 10000000 | |
| 755 | #define CONFIG_ENV_SPI_MODE 0 | |
| 756 | #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ | |
| 757 | #define CONFIG_ENV_SECT_SIZE 0x10000 | |
| 758 | #define CONFIG_ENV_SIZE 0x2000 | |
| 0fa934d2 | 759 | #elif defined(CONFIG_NAND) |
| d793e5a8 | 760 | #define CONFIG_ENV_IS_IN_NAND |
| c9e1f588 YZ |
761 | #ifdef CONFIG_TPL_BUILD |
| 762 | #define CONFIG_ENV_SIZE 0x2000 | |
| 763 | #define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) | |
| 764 | #else | |
| e512c50b | 765 | #if defined(CONFIG_P1010RDB_PA) |
| d793e5a8 | 766 | #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE |
| e512c50b SL |
767 | #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) /* 3*16=48K for env */ |
| 768 | #elif defined(CONFIG_P1010RDB_PB) | |
| 769 | #define CONFIG_ENV_SIZE (16 * 1024) | |
| 770 | #define CONFIG_ENV_RANGE (32 * CONFIG_ENV_SIZE) /* new block size 512K */ | |
| 771 | #endif | |
| c9e1f588 YZ |
772 | #endif |
| 773 | #define CONFIG_ENV_OFFSET (1024 * 1024) | |
| 0fa934d2 | 774 | #elif defined(CONFIG_SYS_RAMBOOT) |
| 49249e13 PA |
775 | #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ |
| 776 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) | |
| 777 | #define CONFIG_ENV_SIZE 0x2000 | |
| 49249e13 PA |
778 | #else |
| 779 | #define CONFIG_ENV_IS_IN_FLASH | |
| 49249e13 | 780 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) |
| 49249e13 PA |
781 | #define CONFIG_ENV_SIZE 0x2000 |
| 782 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ | |
| 783 | #endif | |
| 784 | ||
| 785 | #define CONFIG_LOADS_ECHO /* echo on for serial download */ | |
| 786 | #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ | |
| 787 | ||
| 788 | /* | |
| 789 | * Command line configuration. | |
| 790 | */ | |
| 49249e13 PA |
791 | #define CONFIG_CMD_DATE |
| 792 | #define CONFIG_CMD_ERRATA | |
| 49249e13 PA |
793 | #define CONFIG_CMD_IRQ |
| 794 | #define CONFIG_CMD_MII | |
| 49249e13 PA |
795 | #define CONFIG_CMD_REGINFO |
| 796 | ||
| 797 | #undef CONFIG_WATCHDOG /* watchdog disabled */ | |
| 798 | ||
| 799 | #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \ | |
| 800 | || defined(CONFIG_FSL_SATA) | |
| 801 | #define CONFIG_CMD_EXT2 | |
| 802 | #define CONFIG_CMD_FAT | |
| 803 | #define CONFIG_DOS_PARTITION | |
| 804 | #endif | |
| 805 | ||
| 737537ef RG |
806 | /* Hash command with SHA acceleration supported in hardware */ |
| 807 | #ifdef CONFIG_FSL_CAAM | |
| 808 | #define CONFIG_CMD_HASH | |
| 809 | #define CONFIG_SHA_HW_ACCEL | |
| 810 | #endif | |
| 811 | ||
| 49249e13 PA |
812 | /* |
| 813 | * Miscellaneous configurable options | |
| 814 | */ | |
| 815 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ | |
| 816 | #define CONFIG_CMDLINE_EDITING /* Command-line editing */ | |
| 817 | #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ | |
| 818 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ | |
| 49249e13 PA |
819 | |
| 820 | #if defined(CONFIG_CMD_KGDB) | |
| 821 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ | |
| 822 | #else | |
| 823 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ | |
| 824 | #endif | |
| 825 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) | |
| 826 | /* Print Buffer Size */ | |
| 827 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
| 828 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ | |
| 49249e13 PA |
829 | |
| 830 | /* | |
| 831 | * Internal Definitions | |
| 832 | * | |
| 833 | * Boot Flags | |
| 834 | */ | |
| 835 | #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ | |
| 836 | #define BOOTFLAG_WARM 0x02 /* Software reboot */ | |
| 837 | ||
| 838 | /* | |
| 839 | * For booting Linux, the board info and command line data | |
| 840 | * have to be in the first 64 MB of memory, since this is | |
| 841 | * the maximum mapped by the Linux kernel during initialization. | |
| 842 | */ | |
| 843 | #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ | |
| 844 | #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ | |
| 845 | ||
| 846 | #if defined(CONFIG_CMD_KGDB) | |
| 847 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ | |
| 49249e13 PA |
848 | #endif |
| 849 | ||
| 850 | /* | |
| 851 | * Environment Configuration | |
| 852 | */ | |
| 853 | ||
| 854 | #if defined(CONFIG_TSEC_ENET) | |
| 855 | #define CONFIG_HAS_ETH0 | |
| 856 | #define CONFIG_HAS_ETH1 | |
| 857 | #define CONFIG_HAS_ETH2 | |
| 858 | #endif | |
| 859 | ||
| 8b3637c6 | 860 | #define CONFIG_ROOTPATH "/opt/nfsroot" |
| b3f44c21 | 861 | #define CONFIG_BOOTFILE "uImage" |
| 49249e13 PA |
862 | #define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */ |
| 863 | ||
| 864 | /* default location for tftp and bootm */ | |
| 865 | #define CONFIG_LOADADDR 1000000 | |
| 866 | ||
| 867 | #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ | |
| 868 | #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ | |
| 869 | ||
| 870 | #define CONFIG_BAUDRATE 115200 | |
| 871 | ||
| 872 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
| 5368c55d | 873 | "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG) "\0" \ |
| 49249e13 | 874 | "netdev=eth0\0" \ |
| 5368c55d | 875 | "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ |
| 49249e13 PA |
876 | "loadaddr=1000000\0" \ |
| 877 | "consoledev=ttyS0\0" \ | |
| 878 | "ramdiskaddr=2000000\0" \ | |
| 879 | "ramdiskfile=rootfs.ext2.gz.uboot\0" \ | |
| 880 | "fdtaddr=c00000\0" \ | |
| 881 | "fdtfile=p1010rdb.dtb\0" \ | |
| 882 | "bdev=sda1\0" \ | |
| 883 | "hwconfig=usb1:dr_mode=host,phy_type=utmi\0" \ | |
| 884 | "othbootargs=ramdisk_size=600000\0" \ | |
| 885 | "usbfatboot=setenv bootargs root=/dev/ram rw " \ | |
| 886 | "console=$consoledev,$baudrate $othbootargs; " \ | |
| 887 | "usb start;" \ | |
| 888 | "fatload usb 0:2 $loadaddr $bootfile;" \ | |
| 889 | "fatload usb 0:2 $fdtaddr $fdtfile;" \ | |
| 890 | "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \ | |
| 891 | "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ | |
| 892 | "usbext2boot=setenv bootargs root=/dev/ram rw " \ | |
| 893 | "console=$consoledev,$baudrate $othbootargs; " \ | |
| 894 | "usb start;" \ | |
| 895 | "ext2load usb 0:4 $loadaddr $bootfile;" \ | |
| 896 | "ext2load usb 0:4 $fdtaddr $fdtfile;" \ | |
| 897 | "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ | |
| e512c50b SL |
898 | "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ |
| 899 | CONFIG_BOOTMODE | |
| 900 | ||
| 901 | #if defined(CONFIG_P1010RDB_PA) | |
| 902 | #define CONFIG_BOOTMODE \ | |
| 903 | "boot_bank0=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \ | |
| 904 | "mw.b ffb00011 0; mw.b ffb00009 0; reset\0" \ | |
| 905 | "boot_bank1=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \ | |
| 906 | "mw.b ffb00011 0; mw.b ffb00009 1; reset\0" \ | |
| 907 | "boot_nand=i2c dev 0; i2c mw 18 1 f9; i2c mw 18 3 f0;" \ | |
| 908 | "mw.b ffb00011 0; mw.b ffb00017 1; reset\0" | |
| 909 | ||
| 910 | #elif defined(CONFIG_P1010RDB_PB) | |
| 911 | #define CONFIG_BOOTMODE \ | |
| 912 | "boot_bank0=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \ | |
| 913 | "i2c mw 19 1 2; i2c mw 19 3 e1; reset\0" \ | |
| 914 | "boot_bank1=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \ | |
| 915 | "i2c mw 19 1 12; i2c mw 19 3 e1; reset\0" \ | |
| 916 | "boot_nand=i2c dev 0; i2c mw 18 1 fc; i2c mw 18 3 0;" \ | |
| 917 | "i2c mw 19 1 8; i2c mw 19 3 f7; reset\0" \ | |
| 918 | "boot_spi=i2c dev 0; i2c mw 18 1 fa; i2c mw 18 3 0;" \ | |
| 919 | "i2c mw 19 1 0; i2c mw 19 3 f7; reset\0" \ | |
| 920 | "boot_sd=i2c dev 0; i2c mw 18 1 f8; i2c mw 18 3 0;" \ | |
| 921 | "i2c mw 19 1 4; i2c mw 19 3 f3; reset\0" | |
| 922 | #endif | |
| 49249e13 PA |
923 | |
| 924 | #define CONFIG_RAMBOOTCOMMAND \ | |
| 925 | "setenv bootargs root=/dev/ram rw " \ | |
| 926 | "console=$consoledev,$baudrate $othbootargs; " \ | |
| 927 | "tftp $ramdiskaddr $ramdiskfile;" \ | |
| 928 | "tftp $loadaddr $bootfile;" \ | |
| 929 | "tftp $fdtaddr $fdtfile;" \ | |
| 930 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
| 931 | ||
| 932 | #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND | |
| 933 | ||
| 2f439e80 | 934 | #include <asm/fsl_secure_boot.h> |
| 2f439e80 | 935 | |
| 49249e13 | 936 | #endif /* __CONFIG_H */ |