[u-boot.git] / include / configs / vct.h

/*
 * (C) Copyright 2008 Stefan Roese <[email protected]>, DENX Software Engineering
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * This file contains the configuration parameters for the VCT board
 * family:
 *
 * vct_premium
 * vct_premium_small
 * vct_premium_onenand
 * vct_premium_onenand_small
 * vct_platinum
 * vct_platinum_small
 * vct_platinum_onenand
 * vct_platinum_onenand_small
 * vct_platinumavc
 * vct_platinumavc_small
 * vct_platinumavc_onenand
 * vct_platinumavc_onenand_small
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_MIPS32				/* MIPS 4Kc CPU core	*/
#define CPU_CLOCK_RATE			324000000 /* Clock for the MIPS core */
#define CONFIG_SYS_MIPS_TIMER_FREQ	(CPU_CLOCK_RATE / 2)
#define CONFIG_SYS_HZ			1000

#define CONFIG_SKIP_LOWLEVEL_INIT	/* SDRAM is initialized by the bootstrap code */

#define CONFIG_SYS_MONITOR_BASE		TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN		(256 << 10)
#define CONFIG_STACKSIZE		(256 << 10)
#define CONFIG_SYS_MALLOC_LEN		(1 << 20)
#define CONFIG_SYS_BOOTPARAMS_LEN	(128 << 10)
#define CONFIG_SYS_INIT_SP_OFFSET	0x400000

#if !defined(CONFIG_VCT_NAND) && !defined(CONFIG_VCT_ONENAND)
#define CONFIG_VCT_NOR
#else
#define CONFIG_SYS_NO_FLASH
#endif

/*
 * UART
 */
#define CONFIG_VCT_SERIAL
#define CONFIG_BAUDRATE			115200
#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

/*
 * SDRAM
 */
#define CONFIG_SYS_SDRAM_BASE		0x80000000
#define CONFIG_SYS_MBYTES_SDRAM		128
#define CONFIG_SYS_MEMTEST_START	0x80200000
#define CONFIG_SYS_MEMTEST_END		0x80400000
#define CONFIG_SYS_LOAD_ADDR		0x80400000	/* default load address */

#if defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)
/*
 * SMSC91C11x Network Card
 */
#define CONFIG_DRIVER_SMC911X
#define CONFIG_DRIVER_SMC911X_BASE	0x00000000
#define CONFIG_DRIVER_SMC911X_32_BIT
#define CONFIG_NET_RETRY_COUNT		20
#endif

/*
 * Commands
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ELF
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_I2C

/*
 * Only Premium/Platinum have ethernet support right now
 */
#if defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)
#define CONFIG_CMD_PING
#define CONFIG_CMD_SNTP
#else
#undef CONFIG_CMD_NET
#endif

/*
 * Only Premium/Platinum have USB-EHCI support right now
 */
#if defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)
#define CONFIG_CMD_USB
#define CONFIG_CMD_FAT
#endif

#if defined(CONFIG_CMD_USB)
#define CONFIG_USB_STORAGE
#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION

#define CONFIG_SUPPORT_VFAT

/*
 * USB/EHCI
 */
#define CONFIG_USB_EHCI			/* Enable EHCI USB support	*/
#define CONFIG_USB_EHCI_VCT		/* on VCT platform		*/
#define CONFIG_EHCI_DCACHE		/* with dcache handling support	*/
#define CONFIG_EHCI_MMIO_BIG_ENDIAN
#define CONFIG_EHCI_DESC_BIG_ENDIAN
#define CONFIG_EHCI_IS_TDI
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* re-init HCD after CMD_RESET */
#endif /* CONFIG_CMD_USB */

#if !defined(CONFIG_VCT_NOR)
#undef CONFIG_CMD_FLASH
#undef CONFIG_CMD_IMLS
#endif

#if defined(CONFIG_VCT_NAND)
#define CONFIG_CMD_NAND
#endif

#if defined(CONFIG_VCT_ONENAND)
#define CONFIG_CMD_ONENAND
#endif

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_SUBNETMASK

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
#define CONFIG_SYS_PROMPT	"VCT# "		/* Monitor Command Prompt	*/
#define CONFIG_SYS_CBSIZE	512		/* Console I/O Buffer Size	*/
#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
				 sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
#define CONFIG_TIMESTAMP			/* Print image info with timestamp */
#define CONFIG_CMDLINE_EDITING			/* add command line history	*/
#define CONFIG_SYS_CONSOLE_INFO_QUIET		/* don't print console @ startup*/

/*
 * FLASH and environment organization
 */
#if defined(CONFIG_VCT_NOR)
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_FLASH_NOT_MEM_MAPPED

/*
 * We need special accessor functions for the CFI FLASH driver. This
 * can be enabled via the CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS option.
 */
#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS

/*
 * For the non-memory-mapped NOR FLASH, we need to define the
 * NOR FLASH area. This can't be detected via the addr2info()
 * function, since we check for flash access in the very early
 * U-Boot code, before the NOR FLASH is detected.
 */
#define CONFIG_FLASH_BASE		0xb0000000
#define CONFIG_FLASH_END		0xbfffffff

/*
 * CFI driver settings
 */
#define CONFIG_SYS_FLASH_CFI			/* The flash is CFI compatible	*/
#define CONFIG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/
#define CONFIG_SYS_FLASH_CFI_AMD_RESET	1	/* Use AMD (Spansion) reset cmd */
#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT	/* no byte writes on IXP4xx	*/

#define CONFIG_SYS_FLASH_BASE		0xb0000000
#define CONFIG_SYS_FLASH_BANKS_LIST    { CONFIG_SYS_FLASH_BASE }
#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/

#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/

#ifdef CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_SECT_SIZE	0x10000		/* size of one complete sector	*/
#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/

/* Address and size of Redundant Environment Sector	*/
#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
#endif /* CONFIG_ENV_IS_IN_FLASH */
#endif /* CONFIG_VCT_NOR */

#if defined(CONFIG_VCT_ONENAND)
#define CONFIG_USE_ONENAND_BOARD_INIT
#define	CONFIG_ENV_IS_IN_ONENAND
#define	CONFIG_SYS_ONENAND_BASE		0x00000000	/* this is not real address */
#define CONFIG_SYS_FLASH_BASE		0x00000000
#define CONFIG_ENV_ADDR			(128 << 10)	/* after compr. U-Boot image */
#define	CONFIG_ENV_SIZE			(128 << 10)	/* erase size */
#endif /* CONFIG_VCT_ONENAND */

/*
 * Cache Configuration
 */
#define CONFIG_SYS_DCACHE_SIZE		16384
#define CONFIG_SYS_ICACHE_SIZE		16384
#define CONFIG_SYS_CACHELINE_SIZE	32

/*
 * I2C/EEPROM
 */
#undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
#define	CONFIG_SOFT_I2C			/* I2C bit-banged		*/

#define CONFIG_SYS_I2C_SPEED		83000	/* 83 kHz is supposed to work	*/
#define CONFIG_SYS_I2C_SLAVE		0x7f

/*
 * Software (bit-bang) I2C driver configuration
 */
#define CONFIG_SYS_GPIO_I2C_SCL		11
#define CONFIG_SYS_GPIO_I2C_SDA		10

#ifndef __ASSEMBLY__
int vct_gpio_dir(int pin, int dir);
void vct_gpio_set(int pin, int val);
int vct_gpio_get(int pin);
#endif

#define I2C_INIT	vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SCL, 1)
#define I2C_ACTIVE	vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SDA, 1)
#define I2C_TRISTATE	vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SDA, 0)
#define I2C_READ	vct_gpio_get(CONFIG_SYS_GPIO_I2C_SDA)
#define I2C_SDA(bit)	vct_gpio_set(CONFIG_SYS_GPIO_I2C_SDA, bit)
#define I2C_SCL(bit)	vct_gpio_set(CONFIG_SYS_GPIO_I2C_SCL, bit)
#define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */

#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
/* CAT24WC32 */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2	/* Bytes of address		*/
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5	/* The Catalyst CAT24WC32 has	*/
					/* 32 byte page write mode using*/
					/* last 5 bits of the address	*/
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */

#define CONFIG_BOOTCOMMAND	"run test3"
#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/

/*
 * Needed for 64bit printf format
 */
#define CONFIG_SYS_64BIT_VSPRINTF	1
#define CONFIG_SYS_64BIT_STRTOUL	1

/*
 * UBI configuration
 */
#if defined(CONFIG_VCT_ONENAND)
#define CONFIG_SYS_USE_UBI
#define	CONFIG_CMD_JFFS2
#define	CONFIG_CMD_UBI
#define	CONFIG_RBTREE
#define CONFIG_MTD_PARTITIONS
#define CONFIG_CMD_MTDPARTS

#define MTDIDS_DEFAULT		"onenand0=onenand"
#define MTDPARTS_DEFAULT	"mtdparts=onenand:128k(u-boot),"	\
					"128k(env),"		\
					"20m(kernel),"		\
					"-(rootfs)"
#endif

/*
 * We need a small, stripped down image to fit into the first 128k OneNAND
 * erase block (gzipped). This image only needs basic commands for FLASH
 * (NOR/OneNAND) usage and Linux kernel booting.
 */
#if defined(CONFIG_VCT_SMALL_IMAGE)
#undef CONFIG_CMD_EEPROM
#undef CONFIG_CMD_I2C
#undef CONFIG_CMD_NET
#undef CONFIG_CMD_PING
#undef CONFIG_CMD_SNTP
#undef CONFIG_CMD_ELF
#undef CONFIG_CMD_CONSOLE
#undef CONFIG_CMD_CACHE
#undef CONFIG_CMD_BEDBUG
#undef CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_IRQ
#undef CONFIG_CMD_ITEST
#undef CONFIG_CMD_MII
#undef CONFIG_CMD_MISC
#undef CONFIG_CMD_REGINFO
#undef CONFIG_CMD_STRINGS
#undef CONFIG_CMD_TERMINAL
#undef CONFIG_CMD_ASKENV
#undef CONFIG_CMD_CRC32
#undef CONFIG_CMD_DHCP
#undef CONFIG_CMD_EEPROM
#undef CONFIG_CMD_I2C
#undef CONFIG_CMD_LOADB
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_LOADY
#undef CONFIG_CMD_BDI
#undef CONFIG_CMD_USB
#undef CONFIG_CMD_FAT

#undef CONFIG_DRIVER_SMC911X
#undef CONFIG_SOFT_I2C
#undef CONFIG_AUTOSCRIPT
#undef CONFIG_SYS_LONGHELP
#undef CONFIG_TIMESTAMP
#endif /* CONFIG_VCT_SMALL_IMAGE */

#endif  /* __CONFIG_H */
Commit	Line	Data
ae691e57 SR	1	/*
	2	* (C) Copyright 2008 Stefan Roese <[email protected]>, DENX Software Engineering
	3	*
	4	* This program is free software; you can redistribute it and/or
	5	* modify it under the terms of the GNU General Public License as
	6	* published by the Free Software Foundation; either version 2 of
	7	* the License, or (at your option) any later version.
	8	*
	9	* This program is distributed in the hope that it will be useful,
	10	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	11	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	12	* GNU General Public License for more details.
	13	*
	14	* You should have received a copy of the GNU General Public License
	15	* along with this program; if not, write to the Free Software
	16	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	17	* MA 02111-1307 USA
	18	*/
	19
	20	/*
	21	* This file contains the configuration parameters for the VCT board
	22	* family:
	23	*
	24	* vct_premium
	25	* vct_premium_small
	26	* vct_premium_onenand
	27	* vct_premium_onenand_small
	28	* vct_platinum
	29	* vct_platinum_small
	30	* vct_platinum_onenand
	31	* vct_platinum_onenand_small
	32	* vct_platinumavc
	33	* vct_platinumavc_small
	34	* vct_platinumavc_onenand
	35	* vct_platinumavc_onenand_small
	36	*/
	37
	38	#ifndef __CONFIG_H
	39	#define __CONFIG_H
	40
	41	#define CONFIG_MIPS32 /* MIPS 4Kc CPU core */
	42	#define CPU_CLOCK_RATE 324000000 /* Clock for the MIPS core */
	43	#define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_CLOCK_RATE / 2)
	44	#define CONFIG_SYS_HZ 1000
	45
	46	#define CONFIG_SKIP_LOWLEVEL_INIT /* SDRAM is initialized by the bootstrap code */
	47
	48	#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
	49	#define CONFIG_SYS_MONITOR_LEN (256 << 10)
	50	#define CONFIG_STACKSIZE (256 << 10)
	51	#define CONFIG_SYS_MALLOC_LEN (1 << 20)
	52	#define CONFIG_SYS_BOOTPARAMS_LEN (128 << 10)
	53	#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
	54
	55	#if !defined(CONFIG_VCT_NAND) && !defined(CONFIG_VCT_ONENAND)
	56	#define CONFIG_VCT_NOR
	57	#else
	58	#define CONFIG_SYS_NO_FLASH
	59	#endif
	60
	61	/*
	62	* UART
	63	*/
	64	#define CONFIG_VCT_SERIAL
65	#define CONFIG_BAUDRATE 115200
66	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
67
68	/*
69	* SDRAM
70	*/
71	#define CONFIG_SYS_SDRAM_BASE 0x80000000
72	#define CONFIG_SYS_MBYTES_SDRAM 128
73	#define CONFIG_SYS_MEMTEST_START 0x80200000
74	#define CONFIG_SYS_MEMTEST_END 0x80400000
75	#define CONFIG_SYS_LOAD_ADDR 0x80400000 /* default load address */
76
77	#if defined(CONFIG_VCT_PREMIUM) \|\| defined(CONFIG_VCT_PLATINUM)
78	/*
79	* SMSC91C11x Network Card
80	*/
81	#define CONFIG_DRIVER_SMC911X
82	#define CONFIG_DRIVER_SMC911X_BASE 0x00000000
83	#define CONFIG_DRIVER_SMC911X_32_BIT
84	#define CONFIG_NET_RETRY_COUNT 20
85	#endif
86
87	/*
88	* Commands
89	*/
90	#include <config_cmd_default.h>
91
92	#define CONFIG_CMD_DHCP
93	#define CONFIG_CMD_ELF
94	#define CONFIG_CMD_EEPROM
95	#define CONFIG_CMD_I2C
96
97	/*
98	* Only Premium/Platinum have ethernet support right now
99	*/
100	#if defined(CONFIG_VCT_PREMIUM) \|\| defined(CONFIG_VCT_PLATINUM)
101	#define CONFIG_CMD_PING
102	#define CONFIG_CMD_SNTP
103	#else
104	#undef CONFIG_CMD_NET
105	#endif
106
107	/*
108	* Only Premium/Platinum have USB-EHCI support right now
109	*/
110	#if defined(CONFIG_VCT_PREMIUM) \|\| defined(CONFIG_VCT_PLATINUM)
111	#define CONFIG_CMD_USB
112	#define CONFIG_CMD_FAT
113	#endif
114
115	#if defined(CONFIG_CMD_USB)
116	#define CONFIG_USB_STORAGE
117	#define CONFIG_DOS_PARTITION
118	#define CONFIG_ISO_PARTITION
119
120	#define CONFIG_SUPPORT_VFAT
121
122	/*
123	* USB/EHCI
124	*/
125	#define CONFIG_USB_EHCI /* Enable EHCI USB support */
126	#define CONFIG_USB_EHCI_VCT /* on VCT platform */
127	#define CONFIG_EHCI_DCACHE /* with dcache handling support */
128	#define CONFIG_EHCI_MMIO_BIG_ENDIAN
129	#define CONFIG_EHCI_DESC_BIG_ENDIAN
130	#define CONFIG_EHCI_IS_TDI
131	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* re-init HCD after CMD_RESET */
132	#endif /* CONFIG_CMD_USB */
133
134	#if !defined(CONFIG_VCT_NOR)
135	#undef CONFIG_CMD_FLASH
136	#undef CONFIG_CMD_IMLS
137	#endif
138
139	#if defined(CONFIG_VCT_NAND)
140	#define CONFIG_CMD_NAND
141	#endif
142
143	#if defined(CONFIG_VCT_ONENAND)
144	#define CONFIG_CMD_ONENAND
145	#endif
146
147	/*
148	* BOOTP options
149	*/
150	#define CONFIG_BOOTP_BOOTFILESIZE
151	#define CONFIG_BOOTP_BOOTPATH
152	#define CONFIG_BOOTP_GATEWAY
153	#define CONFIG_BOOTP_HOSTNAME
154	#define CONFIG_BOOTP_SUBNETMASK
155
156	/*
157	* Miscellaneous configurable options
158	*/
159	#define CONFIG_SYS_LONGHELP /* undef to save memory */
160	#define CONFIG_SYS_PROMPT "VCT# " /* Monitor Command Prompt */
161	#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
162	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
163	sizeof(CONFIG_SYS_PROMPT) + 16)
164	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
165	#define CONFIG_TIMESTAMP /* Print image info with timestamp */
166	#define CONFIG_CMDLINE_EDITING /* add command line history */
167	#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup*/
168
169	/*
170	* FLASH and environment organization
171	*/
172	#if defined(CONFIG_VCT_NOR)
173	#define CONFIG_ENV_IS_IN_FLASH
174	#define CONFIG_FLASH_NOT_MEM_MAPPED
175
176	/*
177	* We need special accessor functions for the CFI FLASH driver. This
178	* can be enabled via the CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS option.
179	*/
180	#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
181
182	/*
183	* For the non-memory-mapped NOR FLASH, we need to define the
184	* NOR FLASH area. This can't be detected via the addr2info()
185	* function, since we check for flash access in the very early
186	* U-Boot code, before the NOR FLASH is detected.
187	*/
188	#define CONFIG_FLASH_BASE 0xb0000000
189	#define CONFIG_FLASH_END 0xbfffffff
190
191	/*
192	* CFI driver settings
193	*/
194	#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
195	#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
196	#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* Use AMD (Spansion) reset cmd */
197	#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT /* no byte writes on IXP4xx */
198
199	#define CONFIG_SYS_FLASH_BASE 0xb0000000
200	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
201	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
202	#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
203
204	#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
205	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
206
207	#ifdef CONFIG_ENV_IS_IN_FLASH
208	#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
209	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
210	#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
211
212	/* Address and size of Redundant Environment Sector */
213	#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
214	#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
215	#endif /* CONFIG_ENV_IS_IN_FLASH */
216	#endif /* CONFIG_VCT_NOR */
217
218	#if defined(CONFIG_VCT_ONENAND)
219	#define CONFIG_USE_ONENAND_BOARD_INIT
220	#define CONFIG_ENV_IS_IN_ONENAND
221	#define CONFIG_SYS_ONENAND_BASE 0x00000000 /* this is not real address */
222	#define CONFIG_SYS_FLASH_BASE 0x00000000
223	#define CONFIG_ENV_ADDR (128 << 10) /* after compr. U-Boot image */
224	#define CONFIG_ENV_SIZE (128 << 10) /* erase size */
225	#endif /* CONFIG_VCT_ONENAND */
226
227	/*
228	* Cache Configuration
229	*/
230	#define CONFIG_SYS_DCACHE_SIZE 16384
231	#define CONFIG_SYS_ICACHE_SIZE 16384
232	#define CONFIG_SYS_CACHELINE_SIZE 32
233
234	/*
235	* I2C/EEPROM
236	*/
237	#undef CONFIG_HARD_I2C /* I2C with hardware support */
238	#define CONFIG_SOFT_I2C /* I2C bit-banged */
239
240	#define CONFIG_SYS_I2C_SPEED 83000 /* 83 kHz is supposed to work */
241	#define CONFIG_SYS_I2C_SLAVE 0x7f
242
243	/*
244	* Software (bit-bang) I2C driver configuration
245	*/
246	#define CONFIG_SYS_GPIO_I2C_SCL 11
247	#define CONFIG_SYS_GPIO_I2C_SDA 10
248
249	#ifndef __ASSEMBLY__
250	int vct_gpio_dir(int pin, int dir);
251	void vct_gpio_set(int pin, int val);
252	int vct_gpio_get(int pin);
253	#endif
254
255	#define I2C_INIT vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SCL, 1)
256	#define I2C_ACTIVE vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SDA, 1)
257	#define I2C_TRISTATE vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SDA, 0)
258	#define I2C_READ vct_gpio_get(CONFIG_SYS_GPIO_I2C_SDA)
259	#define I2C_SDA(bit) vct_gpio_set(CONFIG_SYS_GPIO_I2C_SDA, bit)
260	#define I2C_SCL(bit) vct_gpio_set(CONFIG_SYS_GPIO_I2C_SCL, bit)
261	#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
262
263	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
264	/* CAT24WC32 */
265	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
266	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* The Catalyst CAT24WC32 has */
267	/* 32 byte page write mode using*/
268	/* last 5 bits of the address */
269	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
270
271	#define CONFIG_BOOTCOMMAND "run test3"
272	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
273
274	/*
275	* Needed for 64bit printf format
276	*/
277	#define CONFIG_SYS_64BIT_VSPRINTF 1
278	#define CONFIG_SYS_64BIT_STRTOUL 1
279
280	/*
281	* UBI configuration
282	*/
283	#if defined(CONFIG_VCT_ONENAND)
284	#define CONFIG_SYS_USE_UBI
285	#define CONFIG_CMD_JFFS2
286	#define CONFIG_CMD_UBI
287	#define CONFIG_RBTREE
288	#define CONFIG_MTD_PARTITIONS
68d7d651	289	#define CONFIG_CMD_MTDPARTS
ae691e57 SR	290
	291	#define MTDIDS_DEFAULT "onenand0=onenand"
	292	#define MTDPARTS_DEFAULT "mtdparts=onenand:128k(u-boot)," \
	293	"128k(env)," \
	294	"20m(kernel)," \
	295	"-(rootfs)"
	296	#endif
	297
	298	/*
	299	* We need a small, stripped down image to fit into the first 128k OneNAND
	300	* erase block (gzipped). This image only needs basic commands for FLASH
	301	* (NOR/OneNAND) usage and Linux kernel booting.
	302	*/
	303	#if defined(CONFIG_VCT_SMALL_IMAGE)
	304	#undef CONFIG_CMD_EEPROM
	305	#undef CONFIG_CMD_I2C
	306	#undef CONFIG_CMD_NET
	307	#undef CONFIG_CMD_PING
	308	#undef CONFIG_CMD_SNTP
	309	#undef CONFIG_CMD_ELF
	310	#undef CONFIG_CMD_CONSOLE
	311	#undef CONFIG_CMD_CACHE
	312	#undef CONFIG_CMD_BEDBUG
	313	#undef CONFIG_CMD_AUTOSCRIPT
	314	#undef CONFIG_CMD_IRQ
	315	#undef CONFIG_CMD_ITEST
	316	#undef CONFIG_CMD_MII
	317	#undef CONFIG_CMD_MISC
	318	#undef CONFIG_CMD_REGINFO
	319	#undef CONFIG_CMD_STRINGS
	320	#undef CONFIG_CMD_TERMINAL
	321	#undef CONFIG_CMD_ASKENV
	322	#undef CONFIG_CMD_CRC32
	323	#undef CONFIG_CMD_DHCP
	324	#undef CONFIG_CMD_EEPROM
	325	#undef CONFIG_CMD_I2C
	326	#undef CONFIG_CMD_LOADB
	327	#undef CONFIG_CMD_LOADS
	328	#undef CONFIG_CMD_LOADY
	329	#undef CONFIG_CMD_BDI
	330	#undef CONFIG_CMD_USB
	331	#undef CONFIG_CMD_FAT
	332
	333	#undef CONFIG_DRIVER_SMC911X
	334	#undef CONFIG_SOFT_I2C
	335	#undef CONFIG_AUTOSCRIPT
	336	#undef CONFIG_SYS_LONGHELP
	337	#undef CONFIG_TIMESTAMP
	338	#endif /* CONFIG_VCT_SMALL_IMAGE */
	339
	340	#endif /* __CONFIG_H */