[u-boot.git] / include / configs / flea3.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * (C) Copyright 2011, Stefano Babic <[email protected]>
 *
 * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
 *
 * Copyright (C) 2007, Guennadi Liakhovetski <[email protected]>
 *
 * Configuration for the flea3 board.
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <asm/arch/imx-regs.h>

 /* High Level Configuration Options */
#define CONFIG_MX35

#define CONFIG_MACH_TYPE		MACH_TYPE_FLEA3

/* Set TEXT at the beginning of the NOR flash */

/* This is required to setup the ESDC controller */

#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
#define CONFIG_REVISION_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 1024 * 1024)

/*
 * Hardware drivers
 */
#define CONFIG_SYS_SPD_BUS_NUM		2 /* I2C3 */

/*
 * UART (console)
 */
#define CONFIG_MXC_UART_BASE	UART3_BASE

/*
 * Command definition
 */

#define CONFIG_NET_RETRY_COUNT	100

#define CONFIG_SYS_LOAD_ADDR		0x80800000	/* loadaddr env var */

/*
 * Ethernet on SOC (FEC)
 */
#define CONFIG_FEC_MXC
#define IMX_FEC_BASE	FEC_BASE_ADDR
#define CONFIG_FEC_MXC_PHYADDR	0x1

#define CONFIG_ARP_TIMEOUT	200UL

/*
 * Miscellaneous configurable options
 */

#define CONFIG_SYS_CBSIZE	512	/* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_MAXARGS	32	/* max number of command args */

/*
 * Physical Memory Map
 */
#define PHYS_SDRAM_1		CSD0_BASE_ADDR
#define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)

#define CONFIG_SYS_SDRAM_BASE		CSD0_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_ADDR	(IRAM_BASE_ADDR + 0x10000)
#define CONFIG_SYS_INIT_RAM_SIZE		(IRAM_SIZE / 2)
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
					GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
					CONFIG_SYS_GBL_DATA_OFFSET)

/*
 * MTD Command for mtdparts
 */

/*
 * FLASH and environment organization
 */
#define CONFIG_SYS_FLASH_BASE		CS0_BASE_ADDR
#define CONFIG_SYS_MAX_FLASH_BANKS 1	/* max number of memory banks */
#define CONFIG_SYS_MAX_FLASH_SECT 512	/* max number of sectors on one chip */
/* Monitor at beginning of flash */
#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)

/* Address and size of Redundant Environment Sector	*/

/*
 * CFI FLASH driver setup
 */

/* A non-standard buffered write algorithm */

/*
 * NAND FLASH driver setup
 */
#define CONFIG_MXC_NAND_REGS_BASE	(NFC_BASE_ADDR)
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		(NFC_BASE_ADDR)
#define CONFIG_MXC_NAND_HWECC
#define CONFIG_SYS_NAND_LARGEPAGE

/*
 * Default environment and default scripts
 * to update uboot and load kernel
 */

#define CONFIG_HOSTNAME "flea3"
#define	CONFIG_EXTRA_ENV_SETTINGS					\
	"netdev=eth0\0"							\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
		"nfsroot=${serverip}:${rootpath}\0"			\
	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
	"addip_sta=setenv bootargs ${bootargs} "			\
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
		":${hostname}:${netdev}:off panic=1\0"			\
	"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"		\
	"addip=if test -n ${ipdyn};then run addip_dyn;"			\
		"else run addip_sta;fi\0"				\
	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
	"addtty=setenv bootargs ${bootargs}"				\
		" console=ttymxc2,${baudrate}\0"			\
	"addmisc=setenv bootargs ${bootargs} ${misc}\0"			\
	"loadaddr=80800000\0"						\
	"kernel_addr_r=80800000\0"					\
	"hostname=" CONFIG_HOSTNAME "\0"			\
	"bootfile=" CONFIG_HOSTNAME "/uImage\0"		\
	"ramdisk_file=" CONFIG_HOSTNAME "/uRamdisk\0"	\
	"flash_self=run ramargs addip addtty addmtd addmisc;"		\
		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
	"flash_nfs=run nfsargs addip addtty addmtd addmisc;"		\
		"bootm ${kernel_addr}\0"				\
	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
		"run nfsargs addip addtty addmtd addmisc;"		\
		"bootm ${kernel_addr_r}\0"				\
	"net_self_load=tftp ${kernel_addr_r} ${bootfile};"		\
		"tftp ${ramdisk_addr_r} ${ramdisk_file};\0"		\
	"net_self=if run net_self_load;then "				\
		"run ramargs addip addtty addmtd addmisc;"		\
		"bootm ${kernel_addr_r} ${ramdisk_addr_r};"		\
		"else echo Images not loades;fi\0"			\
	"u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0"		\
	"load=tftp ${loadaddr} ${u-boot}\0"				\
	"uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"		\
	"update=protect off ${uboot_addr} +80000;"			\
		"erase ${uboot_addr} +80000;"				\
		"cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"		\
	"upd=if run load;then echo Updating u-boot;if run update;"	\
		"then echo U-Boot updated;"				\
			"else echo Error updating u-boot !;"		\
			"echo Board without bootloader !!;"		\
		"fi;"							\
		"else echo U-Boot not downloaded..exiting;fi\0"		\
	"bootcmd=run net_nfs\0"

#endif				/* __CONFIG_H */
Commit	Line	Data
83d290c5	1	/* SPDX-License-Identifier: GPL-2.0+ */
deb53483 SB	2	/*
	3	* (C) Copyright 2011, Stefano Babic <[email protected]>
	4	*
	5	* (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
	6	*
	7	* Copyright (C) 2007, Guennadi Liakhovetski <[email protected]>
	8	*
	9	* Configuration for the flea3 board.
deb53483 SB	10	*/
	11
	12	#ifndef __CONFIG_H
	13	#define __CONFIG_H
	14
	15	#include <asm/arch/imx-regs.h>
	16
	17	/* High Level Configuration Options */
deb53483	18	#define CONFIG_MX35
deb53483	19
deb53483 SB	20	#define CONFIG_MACH_TYPE MACH_TYPE_FLEA3
	21
	22	/* Set TEXT at the beginning of the NOR flash */
deb53483	23
deb53483	24	/* This is required to setup the ESDC controller */
deb53483 SB	25
	26	#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
	27	#define CONFIG_REVISION_TAG
	28	#define CONFIG_SETUP_MEMORY_TAGS
	29	#define CONFIG_INITRD_TAG
	30
	31	/*
	32	* Size of malloc() pool
	33	*/
	34	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024)
	35
	36	/*
	37	* Hardware drivers
	38	*/
b089d039	39	#define CONFIG_SYS_SPD_BUS_NUM 2 /* I2C3 */
deb53483 SB	40
	41	/*
	42	* UART (console)
	43	*/
40f6fffe	44	#define CONFIG_MXC_UART_BASE UART3_BASE
deb53483	45
deb53483 SB	46	/*
	47	* Command definition
	48	*/
deb53483	49
deb53483 SB	50	#define CONFIG_NET_RETRY_COUNT 100
deb53483 SB	51
72d81360	52	#define CONFIG_SYS_LOAD_ADDR 0x80800000 /* loadaddr env var */
deb53483	53
deb53483 SB	54	/*
	55	* Ethernet on SOC (FEC)
	56	*/
deb53483 SB	57	#define CONFIG_FEC_MXC
deb53483 SB	58	#define IMX_FEC_BASE FEC_BASE_ADDR
deb53483 SB	59	#define CONFIG_FEC_MXC_PHYADDR 0x1
deb53483 SB	60
deb53483 SB	61	#define CONFIG_ARP_TIMEOUT 200UL
	62
	63	/*
	64	* Miscellaneous configurable options
	65	*/
deb53483	66
45a3ad81	67	#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
deb53483	68	/* Print Buffer Size */
45a3ad81	69	#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
deb53483	70
deb53483 SB	71	/*
	72	* Physical Memory Map
	73	*/
fda241d5	74	#define PHYS_SDRAM_1 CSD0_BASE_ADDR
deb53483 SB	75	#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
deb53483 SB	76
fda241d5	77	#define CONFIG_SYS_SDRAM_BASE CSD0_BASE_ADDR
deb53483 SB	78	#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR + 0x10000)
	79	#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE / 2)
	80	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
	81	GENERATED_GBL_DATA_SIZE)
	82	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
	83	CONFIG_SYS_GBL_DATA_OFFSET)
	84
	85	/*
	86	* MTD Command for mtdparts
	87	*/
fda241d5	88
deb53483 SB	89	/*
	90	* FLASH and environment organization
	91	*/
	92	#define CONFIG_SYS_FLASH_BASE CS0_BASE_ADDR
	93	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
	94	#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
	95	/* Monitor at beginning of flash */
	96	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
	97	#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
	98
deb53483	99	/* Address and size of Redundant Environment Sector */
deb53483	100
deb53483 SB	101	/*
	102	* CFI FLASH driver setup
	103	*/
deb53483 SB	104
deb53483 SB	105	/* A non-standard buffered write algorithm */
deb53483 SB	106
	107	/*
	108	* NAND FLASH driver setup
	109	*/
deb53483 SB	110	#define CONFIG_MXC_NAND_REGS_BASE (NFC_BASE_ADDR)
	111	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	112	#define CONFIG_SYS_NAND_BASE (NFC_BASE_ADDR)
	113	#define CONFIG_MXC_NAND_HWECC
	114	#define CONFIG_SYS_NAND_LARGEPAGE
	115
	116	/*
	117	* Default environment and default scripts
	118	* to update uboot and load kernel
	119	*/
deb53483	120
5bc0543d	121	#define CONFIG_HOSTNAME "flea3"
deb53483 SB	122	#define CONFIG_EXTRA_ENV_SETTINGS \
	123	"netdev=eth0\0" \
	124	"nfsargs=setenv bootargs root=/dev/nfs rw " \
	125	"nfsroot=${serverip}:${rootpath}\0" \
	126	"ramargs=setenv bootargs root=/dev/ram rw\0" \
	127	"addip_sta=setenv bootargs ${bootargs} " \
	128	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	129	":${hostname}:${netdev}:off panic=1\0" \
	130	"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \
	131	"addip=if test -n ${ipdyn};then run addip_dyn;" \
93ea89f0	132	"else run addip_sta;fi\0" \
deb53483 SB	133	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
deb53483 SB	134	"addtty=setenv bootargs ${bootargs}" \
fda241d5	135	" console=ttymxc2,${baudrate}\0" \
deb53483	136	"addmisc=setenv bootargs ${bootargs} ${misc}\0" \
fda241d5 SB	137	"loadaddr=80800000\0" \
fda241d5 SB	138	"kernel_addr_r=80800000\0" \
5bc0543d MS	139	"hostname=" CONFIG_HOSTNAME "\0" \
	140	"bootfile=" CONFIG_HOSTNAME "/uImage\0" \
	141	"ramdisk_file=" CONFIG_HOSTNAME "/uRamdisk\0" \
deb53483 SB	142	"flash_self=run ramargs addip addtty addmtd addmisc;" \
	143	"bootm ${kernel_addr} ${ramdisk_addr}\0" \
	144	"flash_nfs=run nfsargs addip addtty addmtd addmisc;" \
	145	"bootm ${kernel_addr}\0" \
	146	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
	147	"run nfsargs addip addtty addmtd addmisc;" \
	148	"bootm ${kernel_addr_r}\0" \
	149	"net_self_load=tftp ${kernel_addr_r} ${bootfile};" \
	150	"tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \
	151	"net_self=if run net_self_load;then " \
	152	"run ramargs addip addtty addmtd addmisc;" \
	153	"bootm ${kernel_addr_r} ${ramdisk_addr_r};" \
	154	"else echo Images not loades;fi\0" \
5bc0543d	155	"u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0" \
deb53483	156	"load=tftp ${loadaddr} ${u-boot}\0" \
93ea89f0	157	"uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \
45a3ad81 HS	158	"update=protect off ${uboot_addr} +80000;" \
45a3ad81 HS	159	"erase ${uboot_addr} +80000;" \
deb53483 SB	160	"cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \
	161	"upd=if run load;then echo Updating u-boot;if run update;" \
	162	"then echo U-Boot updated;" \
	163	"else echo Error updating u-boot !;" \
	164	"echo Board without bootloader !!;" \
	165	"fi;" \
	166	"else echo U-Boot not downloaded..exiting;fi\0" \
	167	"bootcmd=run net_nfs\0"
	168
	169	#endif /* __CONFIG_H */