projects / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 83d290c5 | 1 | /* SPDX-License-Identifier: GPL-2.0+ */ |
| 0b2e13d9 CL |
2 | /* |
| 3 | * Copyright 2014 Freescale Semiconductor, Inc. | |
| e6bd72f8 | 4 | * Copyright 2020 NXP |
| 0b2e13d9 CL |
5 | */ |
| 6 | ||
| 7 | /* | |
| 8 | * T4240 RDB board configuration file | |
| 9 | */ | |
| 10 | #ifndef __CONFIG_H | |
| 11 | #define __CONFIG_H | |
| 12 | ||
| 0b2e13d9 CL |
13 | #define CONFIG_FSL_SATA_V2 |
| 14 | #define CONFIG_PCIE4 | |
| 15 | ||
| 16 | #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ | |
| 17 | ||
| 18 | #ifdef CONFIG_RAMBOOT_PBL | |
| 0b2e13d9 | 19 | #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg |
| 373762c3 CL |
20 | #ifndef CONFIG_SDCARD |
| 21 | #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE | |
| 22 | #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc | |
| 23 | #else | |
| 373762c3 | 24 | #define CONFIG_SPL_FLUSH_IMAGE |
| 373762c3 CL |
25 | #define CONFIG_SPL_PAD_TO 0x40000 |
| 26 | #define CONFIG_SPL_MAX_SIZE 0x28000 | |
| 27 | #define RESET_VECTOR_OFFSET 0x27FFC | |
| 28 | #define BOOT_PAGE_OFFSET 0x27000 | |
| 29 | ||
| 30 | #ifdef CONFIG_SDCARD | |
| 31 | #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC | |
| 373762c3 CL |
32 | #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) |
| 33 | #define CONFIG_SYS_MMC_U_BOOT_DST 0x00200000 | |
| 34 | #define CONFIG_SYS_MMC_U_BOOT_START 0x00200000 | |
| 35 | #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) | |
| 36 | #ifndef CONFIG_SPL_BUILD | |
| 37 | #define CONFIG_SYS_MPC85XX_NO_RESETVEC | |
| 38 | #endif | |
| ec90ac73 | 39 | #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_sd_rcw.cfg |
| 373762c3 CL |
40 | #endif |
| 41 | ||
| 42 | #ifdef CONFIG_SPL_BUILD | |
| 43 | #define CONFIG_SPL_SKIP_RELOCATE | |
| 44 | #define CONFIG_SPL_COMMON_INIT_DDR | |
| 45 | #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE | |
| 373762c3 CL |
46 | #endif |
| 47 | ||
| 0b2e13d9 | 48 | #endif |
| 373762c3 | 49 | #endif /* CONFIG_RAMBOOT_PBL */ |
| 0b2e13d9 CL |
50 | |
| 51 | #define CONFIG_DDR_ECC | |
| 52 | ||
| 0b2e13d9 | 53 | /* High Level Configuration Options */ |
| 0b2e13d9 | 54 | #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ |
| 0b2e13d9 | 55 | |
| 0b2e13d9 CL |
56 | #ifndef CONFIG_RESET_VECTOR_ADDRESS |
| 57 | #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc | |
| 58 | #endif | |
| 59 | ||
| 60 | #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ | |
| 51370d56 | 61 | #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS |
| b38eaec5 RD |
62 | #define CONFIG_PCIE1 /* PCIE controller 1 */ |
| 63 | #define CONFIG_PCIE2 /* PCIE controller 2 */ | |
| 64 | #define CONFIG_PCIE3 /* PCIE controller 3 */ | |
| 0b2e13d9 CL |
65 | #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ |
| 66 | ||
| 0b2e13d9 CL |
67 | #define CONFIG_ENV_OVERWRITE |
| 68 | ||
| 69 | /* | |
| 70 | * These can be toggled for performance analysis, otherwise use default. | |
| 71 | */ | |
| 72 | #define CONFIG_SYS_CACHE_STASHING | |
| 73 | #define CONFIG_BTB /* toggle branch predition */ | |
| 74 | #ifdef CONFIG_DDR_ECC | |
| 75 | #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER | |
| 76 | #define CONFIG_MEM_INIT_VALUE 0xdeadbeef | |
| 77 | #endif | |
| 78 | ||
| 79 | #define CONFIG_ENABLE_36BIT_PHYS | |
| 80 | ||
| 81 | #define CONFIG_ADDR_MAP | |
| 82 | #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ | |
| 83 | ||
| 0b2e13d9 CL |
84 | /* |
| 85 | * Config the L3 Cache as L3 SRAM | |
| 86 | */ | |
| 373762c3 CL |
87 | #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 |
| 88 | #define CONFIG_SYS_L3_SIZE (512 << 10) | |
| 89 | #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) | |
| a09fea1d | 90 | #define SPL_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) |
| 373762c3 CL |
91 | #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) |
| 92 | #define CONFIG_SPL_RELOC_MALLOC_SIZE (50 << 10) | |
| 93 | #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) | |
| 0b2e13d9 CL |
94 | |
| 95 | #define CONFIG_SYS_DCSRBAR 0xf0000000 | |
| 96 | #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull | |
| 97 | ||
| 98 | /* | |
| 99 | * DDR Setup | |
| 100 | */ | |
| 101 | #define CONFIG_VERY_BIG_RAM | |
| 102 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 | |
| 103 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE | |
| 104 | ||
| 0b2e13d9 CL |
105 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 |
| 106 | #define CONFIG_CHIP_SELECTS_PER_CTRL 4 | |
| 0b2e13d9 CL |
107 | |
| 108 | #define CONFIG_DDR_SPD | |
| 0b2e13d9 | 109 | |
| 0b2e13d9 CL |
110 | /* |
| 111 | * IFC Definitions | |
| 112 | */ | |
| 113 | #define CONFIG_SYS_FLASH_BASE 0xe0000000 | |
| 114 | #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) | |
| 115 | ||
| 373762c3 CL |
116 | #ifdef CONFIG_SPL_BUILD |
| 117 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE | |
| 118 | #else | |
| 0b2e13d9 | 119 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE |
| 373762c3 | 120 | #endif |
| 0b2e13d9 | 121 | |
| 0b2e13d9 CL |
122 | #define CONFIG_HWCONFIG |
| 123 | ||
| 124 | /* define to use L1 as initial stack */ | |
| 125 | #define CONFIG_L1_INIT_RAM | |
| 126 | #define CONFIG_SYS_INIT_RAM_LOCK | |
| 127 | #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ | |
| 128 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf | |
| b3142e2c | 129 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 |
| 0b2e13d9 CL |
130 | /* The assembler doesn't like typecast */ |
| 131 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ | |
| 132 | ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ | |
| 133 | CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) | |
| 134 | #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 | |
| 135 | ||
| 136 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ | |
| 137 | GENERATED_GBL_DATA_SIZE) | |
| 138 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
| 139 | ||
| 373762c3 | 140 | #define CONFIG_SYS_MONITOR_LEN (768 * 1024) |
| 0b2e13d9 CL |
141 | #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) |
| 142 | ||
| 143 | /* Serial Port - controlled on board with jumper J8 | |
| 144 | * open - index 2 | |
| 145 | * shorted - index 1 | |
| 146 | */ | |
| 0b2e13d9 CL |
147 | #define CONFIG_SYS_NS16550_SERIAL |
| 148 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
| 149 | #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) | |
| 150 | ||
| 151 | #define CONFIG_SYS_BAUDRATE_TABLE \ | |
| 152 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} | |
| 153 | ||
| 154 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) | |
| 155 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) | |
| 156 | #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) | |
| 157 | #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) | |
| 158 | ||
| 0b2e13d9 | 159 | /* I2C */ |
| e6bd72f8 | 160 | #ifndef CONFIG_DM_I2C |
| 0b2e13d9 | 161 | #define CONFIG_SYS_I2C |
| 0b2e13d9 CL |
162 | #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F |
| 163 | #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 | |
| 164 | #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F | |
| 165 | #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 | |
| e6bd72f8 BL |
166 | #else |
| 167 | #define CONFIG_I2C_SET_DEFAULT_BUS_NUM | |
| 168 | #define CONFIG_I2C_DEFAULT_BUS_NUMBER 0 | |
| 169 | #endif | |
| 170 | ||
| 171 | #define CONFIG_SYS_I2C_FSL | |
| 0b2e13d9 CL |
172 | |
| 173 | /* | |
| 174 | * General PCI | |
| 175 | * Memory space is mapped 1-1, but I/O space must start from 0. | |
| 176 | */ | |
| 177 | ||
| 178 | /* controller 1, direct to uli, tgtid 3, Base address 20000 */ | |
| 179 | #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 | |
| 0b2e13d9 | 180 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull |
| 0b2e13d9 | 181 | #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 |
| 0b2e13d9 | 182 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull |
| 0b2e13d9 CL |
183 | |
| 184 | /* controller 2, Slot 2, tgtid 2, Base address 201000 */ | |
| 185 | #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 | |
| 0b2e13d9 | 186 | #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull |
| 0b2e13d9 | 187 | #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 |
| 0b2e13d9 | 188 | #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull |
| 0b2e13d9 CL |
189 | |
| 190 | /* controller 3, Slot 1, tgtid 1, Base address 202000 */ | |
| 191 | #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 | |
| 0b2e13d9 | 192 | #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull |
| 0b2e13d9 | 193 | #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 |
| 0b2e13d9 | 194 | #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull |
| 0b2e13d9 CL |
195 | |
| 196 | /* controller 4, Base address 203000 */ | |
| 197 | #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 | |
| 198 | #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull | |
| 0b2e13d9 | 199 | #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull |
| 0b2e13d9 CL |
200 | |
| 201 | #ifdef CONFIG_PCI | |
| 75a9137d HZ |
202 | #if !defined(CONFIG_DM_PCI) |
| 203 | #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ | |
| 204 | #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 | |
| 205 | #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ | |
| 206 | #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 | |
| 207 | #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ | |
| 208 | #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 | |
| 209 | #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ | |
| 210 | #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 | |
| 211 | #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ | |
| 212 | #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 | |
| 213 | #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ | |
| 214 | #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 | |
| 215 | #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ | |
| 216 | #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 | |
| 217 | #define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ | |
| 218 | #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 | |
| 219 | #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ | |
| 0b2e13d9 | 220 | #define CONFIG_PCI_INDIRECT_BRIDGE |
| 75a9137d | 221 | #endif |
| 0b2e13d9 CL |
222 | |
| 223 | #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ | |
| 0b2e13d9 CL |
224 | #endif /* CONFIG_PCI */ |
| 225 | ||
| 226 | /* SATA */ | |
| 227 | #ifdef CONFIG_FSL_SATA_V2 | |
| 0b2e13d9 CL |
228 | #define CONFIG_SYS_SATA_MAX_DEVICE 2 |
| 229 | #define CONFIG_SATA1 | |
| 230 | #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR | |
| 231 | #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA | |
| 232 | #define CONFIG_SATA2 | |
| 233 | #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR | |
| 234 | #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA | |
| 235 | ||
| 236 | #define CONFIG_LBA48 | |
| 0b2e13d9 CL |
237 | #endif |
| 238 | ||
| 239 | #ifdef CONFIG_FMAN_ENET | |
| 0b2e13d9 | 240 | #define CONFIG_ETHPRIME "FM1@DTSEC1" |
| 0b2e13d9 CL |
241 | #endif |
| 242 | ||
| 243 | /* | |
| 244 | * Environment | |
| 245 | */ | |
| 246 | #define CONFIG_LOADS_ECHO /* echo on for serial download */ | |
| 247 | #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ | |
| 248 | ||
| 249 | /* | |
| 250 | * Command line configuration. | |
| 251 | */ | |
| 0b2e13d9 | 252 | |
| 0b2e13d9 CL |
253 | /* |
| 254 | * Miscellaneous configurable options | |
| 255 | */ | |
| 0b2e13d9 | 256 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ |
| 0b2e13d9 CL |
257 | |
| 258 | /* | |
| 259 | * For booting Linux, the board info and command line data | |
| 260 | * have to be in the first 64 MB of memory, since this is | |
| 261 | * the maximum mapped by the Linux kernel during initialization. | |
| 262 | */ | |
| 263 | #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ | |
| 264 | #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ | |
| 265 | ||
| 266 | #ifdef CONFIG_CMD_KGDB | |
| 267 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ | |
| 268 | #endif | |
| 269 | ||
| 270 | /* | |
| 271 | * Environment Configuration | |
| 272 | */ | |
| 273 | #define CONFIG_ROOTPATH "/opt/nfsroot" | |
| 274 | #define CONFIG_BOOTFILE "uImage" | |
| 275 | #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ | |
| 276 | ||
| 277 | /* default location for tftp and bootm */ | |
| 278 | #define CONFIG_LOADADDR 1000000 | |
| 279 | ||
| 0b2e13d9 CL |
280 | #define CONFIG_HVBOOT \ |
| 281 | "setenv bootargs config-addr=0x60000000; " \ | |
| 282 | "bootm 0x01000000 - 0x00f00000" | |
| 283 | ||
| 0b2e13d9 | 284 | #if defined(CONFIG_SPIFLASH) |
| 0b2e13d9 | 285 | #elif defined(CONFIG_SDCARD) |
| 0b2e13d9 | 286 | #define CONFIG_SYS_MMC_ENV_DEV 0 |
| 0b2e13d9 CL |
287 | #endif |
| 288 | ||
| 289 | #define CONFIG_SYS_CLK_FREQ 66666666 | |
| 290 | #define CONFIG_DDR_CLK_FREQ 133333333 | |
| 291 | ||
| 292 | #ifndef __ASSEMBLY__ | |
| 293 | unsigned long get_board_sys_clk(void); | |
| 294 | unsigned long get_board_ddr_clk(void); | |
| 295 | #endif | |
| 296 | ||
| 297 | /* | |
| 298 | * DDR Setup | |
| 299 | */ | |
| 300 | #define CONFIG_SYS_SPD_BUS_NUM 0 | |
| 301 | #define SPD_EEPROM_ADDRESS1 0x52 | |
| 302 | #define SPD_EEPROM_ADDRESS2 0x54 | |
| 303 | #define SPD_EEPROM_ADDRESS3 0x56 | |
| 304 | #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ | |
| 305 | #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ | |
| 306 | ||
| 307 | /* | |
| 308 | * IFC Definitions | |
| 309 | */ | |
| 310 | #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) | |
| 311 | #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ | |
| 312 | + 0x8000000) | \ | |
| 313 | CSPR_PORT_SIZE_16 | \ | |
| 314 | CSPR_MSEL_NOR | \ | |
| 315 | CSPR_V) | |
| 316 | #define CONFIG_SYS_NOR1_CSPR_EXT (0xf) | |
| 317 | #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ | |
| 318 | CSPR_PORT_SIZE_16 | \ | |
| 319 | CSPR_MSEL_NOR | \ | |
| 320 | CSPR_V) | |
| 321 | #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) | |
| 322 | /* NOR Flash Timing Params */ | |
| 323 | #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 | |
| 324 | ||
| 325 | #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ | |
| 326 | FTIM0_NOR_TEADC(0x5) | \ | |
| 327 | FTIM0_NOR_TEAHC(0x5)) | |
| 328 | #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ | |
| 329 | FTIM1_NOR_TRAD_NOR(0x1A) |\ | |
| 330 | FTIM1_NOR_TSEQRAD_NOR(0x13)) | |
| 331 | #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ | |
| 332 | FTIM2_NOR_TCH(0x4) | \ | |
| 333 | FTIM2_NOR_TWPH(0x0E) | \ | |
| 334 | FTIM2_NOR_TWP(0x1c)) | |
| 335 | #define CONFIG_SYS_NOR_FTIM3 0x0 | |
| 336 | ||
| 337 | #define CONFIG_SYS_FLASH_QUIET_TEST | |
| 338 | #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ | |
| 339 | ||
| 340 | #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ | |
| 341 | #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ | |
| 342 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ | |
| 343 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ | |
| 344 | ||
| 345 | #define CONFIG_SYS_FLASH_EMPTY_INFO | |
| 346 | #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ | |
| 347 | + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} | |
| 348 | ||
| 349 | /* NAND Flash on IFC */ | |
| 350 | #define CONFIG_NAND_FSL_IFC | |
| 351 | #define CONFIG_SYS_NAND_MAX_ECCPOS 256 | |
| 352 | #define CONFIG_SYS_NAND_MAX_OOBFREE 2 | |
| 353 | #define CONFIG_SYS_NAND_BASE 0xff800000 | |
| 354 | #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) | |
| 355 | ||
| 356 | #define CONFIG_SYS_NAND_CSPR_EXT (0xf) | |
| 357 | #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | |
| 358 | | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ | |
| 359 | | CSPR_MSEL_NAND /* MSEL = NAND */ \ | |
| 360 | | CSPR_V) | |
| 361 | #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) | |
| 362 | ||
| 363 | #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ | |
| 364 | | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ | |
| 365 | | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ | |
| 366 | | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ | |
| 367 | | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ | |
| 368 | | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ | |
| 369 | | CSOR_NAND_PB(128)) /*Page Per Block = 128*/ | |
| 370 | ||
| 371 | #define CONFIG_SYS_NAND_ONFI_DETECTION | |
| 372 | ||
| 373 | /* ONFI NAND Flash mode0 Timing Params */ | |
| 374 | #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ | |
| 375 | FTIM0_NAND_TWP(0x18) | \ | |
| 376 | FTIM0_NAND_TWCHT(0x07) | \ | |
| 377 | FTIM0_NAND_TWH(0x0a)) | |
| 378 | #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ | |
| 379 | FTIM1_NAND_TWBE(0x39) | \ | |
| 380 | FTIM1_NAND_TRR(0x0e) | \ | |
| 381 | FTIM1_NAND_TRP(0x18)) | |
| 382 | #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ | |
| 383 | FTIM2_NAND_TREH(0x0a) | \ | |
| 384 | FTIM2_NAND_TWHRE(0x1e)) | |
| 385 | #define CONFIG_SYS_NAND_FTIM3 0x0 | |
| 386 | ||
| 387 | #define CONFIG_SYS_NAND_DDR_LAW 11 | |
| 388 | #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } | |
| 389 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
| 0b2e13d9 CL |
390 | |
| 391 | #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) | |
| 392 | ||
| 88718be3 | 393 | #if defined(CONFIG_MTD_RAW_NAND) |
| 0b2e13d9 CL |
394 | #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT |
| 395 | #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR | |
| 396 | #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK | |
| 397 | #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR | |
| 398 | #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 | |
| 399 | #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 | |
| 400 | #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 | |
| 401 | #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 | |
| 402 | #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT | |
| 403 | #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR | |
| 404 | #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK | |
| 405 | #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR | |
| 406 | #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 407 | #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 408 | #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 409 | #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 410 | #else | |
| 411 | #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT | |
| 412 | #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR | |
| 413 | #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK | |
| 414 | #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR | |
| 415 | #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 416 | #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 417 | #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 418 | #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 419 | #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT | |
| 420 | #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR | |
| 421 | #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK | |
| 422 | #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR | |
| 423 | #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 | |
| 424 | #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 | |
| 425 | #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 | |
| 426 | #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 | |
| 427 | #endif | |
| 428 | #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT | |
| 429 | #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR | |
| 430 | #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK | |
| 431 | #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR | |
| 432 | #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 433 | #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 434 | #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 435 | #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 436 | ||
| ab06b236 CL |
437 | /* CPLD on IFC */ |
| 438 | #define CONFIG_SYS_CPLD_BASE 0xffdf0000 | |
| 439 | #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) | |
| 440 | #define CONFIG_SYS_CSPR3_EXT (0xf) | |
| 441 | #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ | |
| 442 | | CSPR_PORT_SIZE_8 \ | |
| 443 | | CSPR_MSEL_GPCM \ | |
| 444 | | CSPR_V) | |
| 445 | ||
| 088d52cf | 446 | #define CONFIG_SYS_AMASK3 IFC_AMASK(64 * 1024) |
| ab06b236 CL |
447 | #define CONFIG_SYS_CSOR3 0x0 |
| 448 | ||
| 449 | /* CPLD Timing parameters for IFC CS3 */ | |
| 450 | #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ | |
| 451 | FTIM0_GPCM_TEADC(0x0e) | \ | |
| 452 | FTIM0_GPCM_TEAHC(0x0e)) | |
| 453 | #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ | |
| 454 | FTIM1_GPCM_TRAD(0x1f)) | |
| 455 | #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ | |
| 1b5c2b51 | 456 | FTIM2_GPCM_TCH(0x8) | \ |
| ab06b236 CL |
457 | FTIM2_GPCM_TWP(0x1f)) |
| 458 | #define CONFIG_SYS_CS3_FTIM3 0x0 | |
| 459 | ||
| 0b2e13d9 CL |
460 | #if defined(CONFIG_RAMBOOT_PBL) |
| 461 | #define CONFIG_SYS_RAMBOOT | |
| 462 | #endif | |
| 463 | ||
| 0b2e13d9 CL |
464 | /* I2C */ |
| 465 | #define CONFIG_SYS_FSL_I2C_SPEED 100000 /* I2C speed */ | |
| 466 | #define CONFIG_SYS_FSL_I2C2_SPEED 100000 /* I2C2 speed */ | |
| 467 | #define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ | |
| 468 | #define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */ | |
| 469 | ||
| 470 | #define I2C_MUX_CH_DEFAULT 0x8 | |
| 471 | #define I2C_MUX_CH_VOL_MONITOR 0xa | |
| 472 | #define I2C_MUX_CH_VSC3316_FS 0xc | |
| 473 | #define I2C_MUX_CH_VSC3316_BS 0xd | |
| 474 | ||
| 475 | /* Voltage monitor on channel 2*/ | |
| 476 | #define I2C_VOL_MONITOR_ADDR 0x40 | |
| 477 | #define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 | |
| 478 | #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 | |
| 479 | #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 | |
| 480 | ||
| 2f66a828 YZ |
481 | #define CONFIG_VID_FLS_ENV "t4240rdb_vdd_mv" |
| 482 | #ifndef CONFIG_SPL_BUILD | |
| 483 | #define CONFIG_VID | |
| 484 | #endif | |
| 485 | #define CONFIG_VOL_MONITOR_IR36021_SET | |
| 486 | #define CONFIG_VOL_MONITOR_IR36021_READ | |
| 487 | /* The lowest and highest voltage allowed for T4240RDB */ | |
| 488 | #define VDD_MV_MIN 819 | |
| 489 | #define VDD_MV_MAX 1212 | |
| 490 | ||
| 0b2e13d9 CL |
491 | /* |
| 492 | * eSPI - Enhanced SPI | |
| 493 | */ | |
| 0b2e13d9 | 494 | |
| 0b2e13d9 CL |
495 | /* Qman/Bman */ |
| 496 | #ifndef CONFIG_NOBQFMAN | |
| 0b2e13d9 CL |
497 | #define CONFIG_SYS_BMAN_NUM_PORTALS 50 |
| 498 | #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 | |
| 499 | #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull | |
| 500 | #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 | |
| 3fa66db4 JL |
501 | #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 |
| 502 | #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 | |
| 503 | #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE | |
| 504 | #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) | |
| 505 | #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ | |
| 506 | CONFIG_SYS_BMAN_CENA_SIZE) | |
| 507 | #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) | |
| 508 | #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 | |
| 0b2e13d9 CL |
509 | #define CONFIG_SYS_QMAN_NUM_PORTALS 50 |
| 510 | #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 | |
| 511 | #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull | |
| 512 | #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 | |
| 3fa66db4 JL |
513 | #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 |
| 514 | #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 | |
| 515 | #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE | |
| 516 | #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) | |
| 517 | #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ | |
| 518 | CONFIG_SYS_QMAN_CENA_SIZE) | |
| 519 | #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) | |
| 520 | #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 | |
| 0b2e13d9 CL |
521 | |
| 522 | #define CONFIG_SYS_DPAA_FMAN | |
| 523 | #define CONFIG_SYS_DPAA_PME | |
| 524 | #define CONFIG_SYS_PMAN | |
| 525 | #define CONFIG_SYS_DPAA_DCE | |
| 526 | #define CONFIG_SYS_DPAA_RMAN | |
| 527 | #define CONFIG_SYS_INTERLAKEN | |
| 528 | ||
| 529 | /* Default address of microcode for the Linux Fman driver */ | |
| 530 | #if defined(CONFIG_SPIFLASH) | |
| 531 | /* | |
| 532 | * env is stored at 0x100000, sector size is 0x10000, ucode is stored after | |
| 533 | * env, so we got 0x110000. | |
| 534 | */ | |
| 0b2e13d9 CL |
535 | #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 |
| 536 | #elif defined(CONFIG_SDCARD) | |
| 537 | /* | |
| 538 | * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is | |
| 373762c3 CL |
539 | * about 1MB (2048 blocks), Env is stored after the image, and the env size is |
| 540 | * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080. | |
| 0b2e13d9 | 541 | */ |
| 373762c3 | 542 | #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) |
| 88718be3 | 543 | #elif defined(CONFIG_MTD_RAW_NAND) |
| 0b2e13d9 CL |
544 | #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) |
| 545 | #else | |
| 0b2e13d9 CL |
546 | #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 |
| 547 | #endif | |
| 548 | #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 | |
| 549 | #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) | |
| 550 | #endif /* CONFIG_NOBQFMAN */ | |
| 551 | ||
| 552 | #ifdef CONFIG_SYS_DPAA_FMAN | |
| 0b2e13d9 CL |
553 | #define CONFIG_CORTINA_FW_ADDR 0xefe00000 |
| 554 | #define CONFIG_CORTINA_FW_LENGTH 0x40000 | |
| 0b2e13d9 CL |
555 | #define SGMII_PHY_ADDR1 0x0 |
| 556 | #define SGMII_PHY_ADDR2 0x1 | |
| 557 | #define SGMII_PHY_ADDR3 0x2 | |
| 558 | #define SGMII_PHY_ADDR4 0x3 | |
| 559 | #define SGMII_PHY_ADDR5 0x4 | |
| 560 | #define SGMII_PHY_ADDR6 0x5 | |
| 561 | #define SGMII_PHY_ADDR7 0x6 | |
| 562 | #define SGMII_PHY_ADDR8 0x7 | |
| 563 | #define FM1_10GEC1_PHY_ADDR 0x10 | |
| 564 | #define FM1_10GEC2_PHY_ADDR 0x11 | |
| 565 | #define FM2_10GEC1_PHY_ADDR 0x12 | |
| 566 | #define FM2_10GEC2_PHY_ADDR 0x13 | |
| 567 | #define CORTINA_PHY_ADDR1 FM1_10GEC1_PHY_ADDR | |
| 568 | #define CORTINA_PHY_ADDR2 FM1_10GEC2_PHY_ADDR | |
| 569 | #define CORTINA_PHY_ADDR3 FM2_10GEC1_PHY_ADDR | |
| 570 | #define CORTINA_PHY_ADDR4 FM2_10GEC2_PHY_ADDR | |
| 571 | #endif | |
| 572 | ||
| 0b2e13d9 CL |
573 | /* SATA */ |
| 574 | #ifdef CONFIG_FSL_SATA_V2 | |
| 0b2e13d9 CL |
575 | #define CONFIG_SYS_SATA_MAX_DEVICE 2 |
| 576 | #define CONFIG_SATA1 | |
| 577 | #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR | |
| 578 | #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA | |
| 579 | #define CONFIG_SATA2 | |
| 580 | #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR | |
| 581 | #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA | |
| 582 | ||
| 583 | #define CONFIG_LBA48 | |
| 0b2e13d9 CL |
584 | #endif |
| 585 | ||
| 586 | #ifdef CONFIG_FMAN_ENET | |
| 0b2e13d9 | 587 | #define CONFIG_ETHPRIME "FM1@DTSEC1" |
| 0b2e13d9 CL |
588 | #endif |
| 589 | ||
| 590 | /* | |
| 591 | * USB | |
| 592 | */ | |
| 0b2e13d9 CL |
593 | #define CONFIG_USB_EHCI_FSL |
| 594 | #define CONFIG_EHCI_HCD_INIT_AFTER_RESET | |
| 0b2e13d9 CL |
595 | #define CONFIG_HAS_FSL_DR_USB |
| 596 | ||
| 0b2e13d9 | 597 | #ifdef CONFIG_MMC |
| 0b2e13d9 CL |
598 | #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR |
| 599 | #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT | |
| 929dfdc2 | 600 | #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 |
| 0b2e13d9 CL |
601 | #endif |
| 602 | ||
| 0b2e13d9 CL |
603 | |
| 604 | #define __USB_PHY_TYPE utmi | |
| 605 | ||
| 606 | /* | |
| 607 | * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be | |
| 608 | * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way | |
| 609 | * interleaving. It can be cacheline, page, bank, superbank. | |
| 610 | * See doc/README.fsl-ddr for details. | |
| 611 | */ | |
| 26bc57da | 612 | #ifdef CONFIG_ARCH_T4240 |
| 0b2e13d9 | 613 | #define CTRL_INTLV_PREFERED 3way_4KB |
| 1a344456 CL |
614 | #else |
| 615 | #define CTRL_INTLV_PREFERED cacheline | |
| 616 | #endif | |
| 0b2e13d9 CL |
617 | |
| 618 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
| 619 | "hwconfig=fsl_ddr:" \ | |
| 620 | "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ | |
| 621 | "bank_intlv=auto;" \ | |
| 622 | "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ | |
| 623 | "netdev=eth0\0" \ | |
| 624 | "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ | |
| 625 | "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ | |
| 626 | "tftpflash=tftpboot $loadaddr $uboot && " \ | |
| 627 | "protect off $ubootaddr +$filesize && " \ | |
| 628 | "erase $ubootaddr +$filesize && " \ | |
| 629 | "cp.b $loadaddr $ubootaddr $filesize && " \ | |
| 630 | "protect on $ubootaddr +$filesize && " \ | |
| 631 | "cmp.b $loadaddr $ubootaddr $filesize\0" \ | |
| 632 | "consoledev=ttyS0\0" \ | |
| 633 | "ramdiskaddr=2000000\0" \ | |
| 634 | "ramdiskfile=t4240rdb/ramdisk.uboot\0" \ | |
| b24a4f62 | 635 | "fdtaddr=1e00000\0" \ |
| 0b2e13d9 CL |
636 | "fdtfile=t4240rdb/t4240rdb.dtb\0" \ |
| 637 | "bdev=sda3\0" | |
| 638 | ||
| 639 | #define CONFIG_HVBOOT \ | |
| 640 | "setenv bootargs config-addr=0x60000000; " \ | |
| 641 | "bootm 0x01000000 - 0x00f00000" | |
| 642 | ||
| 643 | #define CONFIG_LINUX \ | |
| 644 | "setenv bootargs root=/dev/ram rw " \ | |
| 645 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 646 | "setenv ramdiskaddr 0x02000000;" \ | |
| 647 | "setenv fdtaddr 0x00c00000;" \ | |
| 648 | "setenv loadaddr 0x1000000;" \ | |
| 649 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
| 650 | ||
| 651 | #define CONFIG_HDBOOT \ | |
| 652 | "setenv bootargs root=/dev/$bdev rw " \ | |
| 653 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 654 | "tftp $loadaddr $bootfile;" \ | |
| 655 | "tftp $fdtaddr $fdtfile;" \ | |
| 656 | "bootm $loadaddr - $fdtaddr" | |
| 657 | ||
| 658 | #define CONFIG_NFSBOOTCOMMAND \ | |
| 659 | "setenv bootargs root=/dev/nfs rw " \ | |
| 660 | "nfsroot=$serverip:$rootpath " \ | |
| 661 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ | |
| 662 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 663 | "tftp $loadaddr $bootfile;" \ | |
| 664 | "tftp $fdtaddr $fdtfile;" \ | |
| 665 | "bootm $loadaddr - $fdtaddr" | |
| 666 | ||
| 667 | #define CONFIG_RAMBOOTCOMMAND \ | |
| 668 | "setenv bootargs root=/dev/ram rw " \ | |
| 669 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 670 | "tftp $ramdiskaddr $ramdiskfile;" \ | |
| 671 | "tftp $loadaddr $bootfile;" \ | |
| 672 | "tftp $fdtaddr $fdtfile;" \ | |
| 673 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
| 674 | ||
| 675 | #define CONFIG_BOOTCOMMAND CONFIG_LINUX | |
| 676 | ||
| 677 | #include <asm/fsl_secure_boot.h> | |
| 678 | ||
| 0b2e13d9 | 679 | #endif /* __CONFIG_H */ |