[u-boot.git] / dts / upstream / src / arm64 / rockchip / rk3566-powkiddy-rk2023.dtsi

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3566.dtsi"

/ {
	chassis-type = "handset";

	aliases {
		mmc1 = &sdmmc0;
		mmc2 = &sdmmc1;
		mmc3 = &sdmmc2;
	};

	adc-joystick {
		compatible = "adc-joystick";
		io-channels = <&adc_mux 0>,
			      <&adc_mux 1>,
			      <&adc_mux 2>,
			      <&adc_mux 3>;
		pinctrl-0 = <&joy_mux_en>;
		pinctrl-names = "default";
		poll-interval = <60>;
		#address-cells = <1>;
		#size-cells = <0>;

		axis@0 {
			reg = <0>;
			abs-flat = <32>;
			abs-fuzz = <32>;
			abs-range = <1023 15>;
			linux,code = <ABS_X>;
		};

		axis@1 {
			reg = <1>;
			abs-flat = <32>;
			abs-fuzz = <32>;
			abs-range = <15 1023>;
			linux,code = <ABS_RX>;
		};

		axis@2 {
			reg = <2>;
			abs-flat = <32>;
			abs-fuzz = <32>;
			abs-range = <15 1023>;
			linux,code = <ABS_Y>;
		};

		axis@3 {
			reg = <3>;
			abs-flat = <32>;
			abs-fuzz = <32>;
			abs-range = <1023 15>;
			linux,code = <ABS_RY>;
		};
	};

	adc_mux: adc-mux {
		compatible = "io-channel-mux";
		channels = "left_x", "right_x", "left_y", "right_y";
		#io-channel-cells = <1>;
		io-channels = <&saradc 3>;
		io-channel-names = "parent";
		mux-controls = <&gpio_mux>;
		settle-time-us = <100>;
	};

	backlight: backlight {
		compatible = "pwm-backlight";
		power-supply = <&vcc_sys>;
		pwms = <&pwm4 0 25000 0>;
	};

	battery: battery {
		compatible = "simple-battery";
		charge-full-design-microamp-hours = <3151000>;
		charge-term-current-microamp = <300000>;
		constant-charge-current-max-microamp = <2000000>;
		constant-charge-voltage-max-microvolt = <4250000>;
		factory-internal-resistance-micro-ohms = <117000>;
		voltage-max-design-microvolt = <4172000>;
		voltage-min-design-microvolt = <3400000>;

		ocv-capacity-celsius = <20>;
		ocv-capacity-table-0 =  <4172000 100>, <4092000 95>, <4035000 90>, <3990000 85>,
					<3939000 80>, <3895000 75>, <3852000 70>, <3807000 65>,
					<3762000 60>, <3713000 55>, <3672000 50>, <3647000 45>,
					<3629000 40>, <3613000 35>, <3598000 30>, <3578000 25>,
					<3550000 20>, <3519000 15>, <3479000 10>, <3438000 5>,
					<3400000 0>;
	};

	gpio_keys_control: gpio-keys-control {
		compatible = "gpio-keys";
		pinctrl-0 = <&btn_pins_ctrl>;
		pinctrl-names = "default";

		button-a {
			gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
			label = "EAST";
			linux,code = <BTN_EAST>;
		};

		button-b {
			gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>;
			label = "SOUTH";
			linux,code = <BTN_SOUTH>;
		};

		button-down {
			gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>;
			label = "DPAD-DOWN";
			linux,code = <BTN_DPAD_DOWN>;
		};

		button-l1 {
			gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
			label = "TL";
			linux,code = <BTN_TL>;
		};

		button-l2 {
			gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
			label = "TL2";
			linux,code = <BTN_TL2>;
		};

		button-left {
			gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
			label = "DPAD-LEFT";
			linux,code = <BTN_DPAD_LEFT>;
		};

		button-r1 {
			gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
			label = "TR";
			linux,code = <BTN_TR>;
		};

		button-r2 {
			gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
			label = "TR2";
			linux,code = <BTN_TR2>;
		};

		button-right {
			gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
			label = "DPAD-RIGHT";
			linux,code = <BTN_DPAD_RIGHT>;
		};

		button-select {
			gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
			label = "SELECT";
			linux,code = <BTN_SELECT>;
		};

		button-start {
			gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>;
			label = "START";
			linux,code = <BTN_START>;
		};

		button-thumbl {
			gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
			label = "THUMBL";
			linux,code = <BTN_THUMBL>;
		};

		button-thumbr {
			gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
			label = "THUMBR";
			linux,code = <BTN_THUMBR>;
		};

		button-up {
			gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
			label = "DPAD-UP";
			linux,code = <BTN_DPAD_UP>;
		};

		button-x {
			gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
			label = "NORTH";
			linux,code = <BTN_NORTH>;
		};

		button-y {
			gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
			label = "WEST";
			linux,code = <BTN_WEST>;
		};
	};

	gpio_keys_vol: gpio-keys-vol {
		compatible = "gpio-keys";
		autorepeat;
		pinctrl-0 = <&btn_pins_vol>;
		pinctrl-names = "default";

		button-vol-down {
			gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
			label = "VOLUMEDOWN";
			linux,code = <KEY_VOLUMEDOWN>;
		};

		button-vol-up {
			gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
			label = "VOLUMEUP";
			linux,code = <KEY_VOLUMEUP>;
		};
	};

	gpio_mux: mux-controller {
		compatible = "gpio-mux";
		mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>,
			    <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
		#mux-control-cells = <0>;
	};

	hdmi-con {
		compatible = "hdmi-connector";
		ddc-i2c-bus = <&i2c5>;
		type = "c";

		port {
			hdmi_con_in: endpoint {
				remote-endpoint = <&hdmi_out_con>;
			};
		};
	};

	/*
	 * Device also includes an always on LED that is wired to the 5V input
	 * voltage and is on when the device is plugged in.
	 */
	leds: pwm-leds {
		compatible = "pwm-leds";

		green_led: led-0 {
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_STATUS;
			max-brightness = <255>;
			pwms = <&pwm6 0 25000 0>;
		};

		red_led: led-1 {
			color = <LED_COLOR_ID_RED>;
			function = LED_FUNCTION_CHARGING;
			max-brightness = <255>;
			pwms = <&pwm7 0 25000 0>;
		};
	};

	sdio_pwrseq: sdio-pwrseq {
		compatible = "mmc-pwrseq-simple";
		clocks = <&rk817 1>;
		clock-names = "ext_clock";
		pinctrl-0 = <&wifi_enable_h>;
		pinctrl-names = "default";
		post-power-on-delay-ms = <200>;
		reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
	};

	/*
	 * Channels reversed for speakers. Headphones automatically switch via hardware when
	 * detected with no ability to control output in software. Headphones appear to be mono
	 * (each output channel receives all audio). No microphone support on 3.5mm jack.
	 */
	sound {
		compatible = "simple-audio-card";
		simple-audio-card,name = "rk817_ext";
		simple-audio-card,format = "i2s";
		simple-audio-card,mclk-fs = <256>;
		simple-audio-card,widgets =
			"Headphone", "Headphones";
		simple-audio-card,routing =
			"Headphones", "HPOL",
			"Headphones", "HPOR";

		simple-audio-card,codec {
			sound-dai = <&rk817>;
		};

		simple-audio-card,cpu {
			sound-dai = <&i2s1_8ch>;
		};
	};

	vcc3v3_lcd0_n: regulator-vcc3v3-lcd0 {
		compatible = "regulator-fixed";
		gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		pinctrl-0 = <&vcc_lcd_h>;
		pinctrl-names = "default";
		regulator-boot-on;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-name = "vcc3v3_lcd0_n";
		vin-supply = <&vcc_3v3>;
		regulator-state-mem {
			regulator-off-in-suspend;
		};
	};

	vcc_sys: regulator-vcc-sys {
		compatible = "regulator-fixed";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <3800000>;
		regulator-max-microvolt = <3800000>;
		regulator-name = "vcc_sys";
	};

	vcc_wifi: regulator-vcc-wifi {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
		pinctrl-0 = <&vcc_wifi_h>;
		pinctrl-names = "default";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-name = "vcc_wifi";
	};
};

&combphy1 {
	status = "okay";
};

&cpu0 {
	cpu-supply = <&vdd_cpu>;
};

&cpu1 {
	cpu-supply = <&vdd_cpu>;
};

&cpu2 {
	cpu-supply = <&vdd_cpu>;
};

&cpu3 {
	cpu-supply = <&vdd_cpu>;
};

&dsi0 {
	status = "okay";
	#address-cells = <1>;
	#size-cells = <0>;

	ports {
		dsi0_in: port@0 {
			reg = <0>;
			dsi0_in_vp1: endpoint {
				remote-endpoint = <&vp1_out_dsi0>;
			};
		};

		dsi0_out: port@1 {
			reg = <1>;
			mipi_out_panel: endpoint {
				remote-endpoint = <&mipi_in_panel>;
			};
		};
	};
};

&dsi_dphy0 {
	status = "okay";
};

&gpu {
	mali-supply = <&vdd_gpu>;
	status = "okay";
};

&hdmi {
	ddc-i2c-bus = <&i2c5>;
	pinctrl-0 = <&hdmitxm0_cec>;
	pinctrl-names = "default";
	status = "okay";
};

&hdmi_in {
	hdmi_in_vp0: endpoint {
		remote-endpoint = <&vp0_out_hdmi>;
	};
};

&hdmi_out {
	hdmi_out_con: endpoint {
		remote-endpoint = <&hdmi_con_in>;
	};
};

&hdmi_sound {
	status = "okay";
};

&i2c0 {
	status = "okay";

	rk817: pmic@20 {
		compatible = "rockchip,rk817";
		reg = <0x20>;
		interrupt-parent = <&gpio0>;
		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
		clock-output-names = "rk808-clkout1", "rk808-clkout2";
		clock-names = "mclk";
		clocks = <&cru I2S1_MCLKOUT_TX>;
		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
		#clock-cells = <1>;
		#sound-dai-cells = <0>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>;
		wakeup-source;

		vcc1-supply = <&vcc_sys>;
		vcc2-supply = <&vcc_sys>;
		vcc3-supply = <&vcc_sys>;
		vcc4-supply = <&vcc_sys>;
		vcc5-supply = <&vcc_sys>;
		vcc6-supply = <&vcc_sys>;
		vcc7-supply = <&vcc_sys>;
		vcc8-supply = <&vcc_sys>;
		vcc9-supply = <&dcdc_boost>;

		regulators {
			vdd_logic: DCDC_REG1 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <500000>;
				regulator-max-microvolt = <1350000>;
				regulator-ramp-delay = <6001>;
				regulator-initial-mode = <0x2>;
				regulator-name = "vdd_logic";
				regulator-state-mem {
					regulator-off-in-suspend;
					regulator-suspend-microvolt = <900000>;
				};
			};

			vdd_gpu: DCDC_REG2 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <500000>;
				regulator-max-microvolt = <1350000>;
				regulator-ramp-delay = <6001>;
				regulator-initial-mode = <0x2>;
				regulator-name = "vdd_gpu";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc_ddr: DCDC_REG3 {
				regulator-always-on;
				regulator-boot-on;
				regulator-initial-mode = <0x2>;
				regulator-name = "vcc_ddr";
				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vcc_3v3: DCDC_REG4 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-initial-mode = <0x2>;
				regulator-name = "vcc_3v3";
				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <3300000>;
				};
			};

			vcca1v8_pmu: LDO_REG1 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcca1v8_pmu";
				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <1800000>;
				};
			};

			vdda_0v9: LDO_REG2 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <900000>;
				regulator-name = "vdda_0v9";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdda0v9_pmu: LDO_REG3 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <900000>;
				regulator-name = "vdda0v9_pmu";
				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <900000>;
				};
			};

			vccio_acodec: LDO_REG4 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vccio_acodec";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vccio_sd: LDO_REG5 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vccio_sd";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc3v3_pmu: LDO_REG6 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vcc3v3_pmu";
				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <3300000>;
				};
			};

			vcc_1v8: LDO_REG7 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcc_1v8";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc1v8_dvp: LDO_REG8 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vcc1v8_dvp";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc2v8_dvp: LDO_REG9 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <2800000>;
				regulator-max-microvolt = <2800000>;
				regulator-name = "vcc2v8_dvp";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			dcdc_boost: BOOST {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <4700000>;
				regulator-max-microvolt = <5400000>;
				regulator-name = "boost";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			otg_switch: OTG_SWITCH {
				regulator-name = "otg_switch";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};
		};

		rk817_charger: charger {
			monitored-battery = <&battery>;
			rockchip,resistor-sense-micro-ohms = <10000>;
			rockchip,sleep-enter-current-microamp = <300000>;
			rockchip,sleep-filter-current-microamp = <100000>;
		};
	};
};

&i2c5 {
	pinctrl-0 = <&i2c5m1_xfer>;
	pinctrl-names = "default";
	status = "okay";
};

&i2s0_8ch {
	status = "okay";
};

&i2s1_8ch {
	pinctrl-0 = <&i2s1m0_sclktx
		     &i2s1m0_lrcktx
		     &i2s1m0_sdi0
		     &i2s1m0_sdo0>;
	pinctrl-names = "default";
	rockchip,trcm-sync-tx-only;
	status = "okay";
};

&pinctrl {
	gpio-btns {
		btn_pins_ctrl: btn-pins-ctrl {
			rockchip,pins =
				<3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
				<3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
				<3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
				<3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
				<3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
				<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
				<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
				<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
				<3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
				<3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
				<3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
				<3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
				<3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>,
				<3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>,
				<3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>,
				<3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
		};

		btn_pins_vol: btn-pins-vol {
			rockchip,pins =
				<3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
				<3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	joy-mux {
		joy_mux_en: joy-mux-en {
			rockchip,pins =
				<0 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>;
		};
	};

	gpio-lcd {
		lcd_rst: lcd-rst {
			rockchip,pins =
				<4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	pmic {
		pmic_int_l: pmic-int-l {
			rockchip,pins =
				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	sdio-pwrseq {
		wifi_enable_h: wifi-enable-h {
			rockchip,pins =
				<4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	vcc3v3-lcd {
		vcc_lcd_h: vcc-lcd-h {
			rockchip,pins =
				<0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	vcc-wifi {
		vcc_wifi_h: vcc-wifi-h {
			rockchip,pins =
				<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};
};

&pmu_io_domains {
	status = "okay";
	pmuio1-supply = <&vcc3v3_pmu>;
	pmuio2-supply = <&vcc3v3_pmu>;
	vccio1-supply = <&vccio_acodec>;
	vccio3-supply = <&vccio_sd>;
	vccio4-supply = <&vcc_1v8>;
	vccio5-supply = <&vcc_3v3>;
	vccio6-supply = <&vcc1v8_dvp>;
	vccio7-supply = <&vcc_3v3>;
};

&pwm4 {
	status = "okay";
};

&pwm6 {
	status = "okay";
};

&pwm7 {
	status = "okay";
};

&saradc {
	vref-supply = <&vcc_1v8>;
	status = "okay";
};

&sdmmc0 {
	bus-width = <4>;
	cap-sd-highspeed;
	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
	disable-wp;
	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
	pinctrl-names = "default";
	sd-uhs-sdr104;
	vmmc-supply = <&vcc_3v3>;
	vqmmc-supply = <&vccio_sd>;
	status = "okay";
};

&sdmmc1 {
	bus-width = <4>;
	cap-sd-highspeed;
	cd-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>;
	disable-wp;
	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &sdmmc1_det>;
	pinctrl-names = "default";
	sd-uhs-sdr104;
	vmmc-supply = <&vcc_3v3>;
	vqmmc-supply = <&vcc1v8_dvp>;
	status = "okay";
};

&sdmmc2 {
	bus-width = <4>;
	cap-sd-highspeed;
	cap-sdio-irq;
	keep-power-in-suspend;
	mmc-pwrseq = <&sdio_pwrseq>;
	non-removable;
	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
	pinctrl-names = "default";
	vmmc-supply = <&vcc_wifi>;
	vqmmc-supply = <&vcca1v8_pmu>;
	status = "okay";
};

&tsadc {
	rockchip,hw-tshut-mode = <1>;
	rockchip,hw-tshut-polarity = <0>;
	status = "okay";
};

&uart1 {
	pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn &uart1m1_rtsn>;
	pinctrl-names = "default";
	uart-has-rtscts;
	status = "okay";

	bluetooth: bluetooth {
		compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
		device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
		enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
		host-wake-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
	};
};

&usb_host0_xhci {
	dr_mode = "peripheral";
	phys = <&usb2phy0_otg>;
	phy-names = "usb2-phy";
	status = "okay";
};

&usb_host1_ehci {
	status = "okay";
};

&usb_host1_ohci {
	status = "okay";
};

&usb_host1_xhci {
	phy-names = "usb2-phy", "usb3-phy";
	phys = <&usb2phy1_host>, <&combphy1 PHY_TYPE_USB3>;
	status = "okay";
};

&usb2phy0 {
	status = "okay";
};

&usb2phy0_otg {
	status = "okay";
};

&usb2phy1 {
	status = "okay";
};

&usb2phy1_host {
	status = "okay";
};

&vop {
	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
	status = "okay";
};

&vop_mmu {
	status = "okay";
};

&vp0 {
	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
		remote-endpoint = <&hdmi_in_vp0>;
	};
};

&vp1 {
	vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
		reg = <ROCKCHIP_VOP2_EP_MIPI0>;
		remote-endpoint = <&dsi0_in_vp1>;
	};
};
Commit	Line	Data
93743d24 TR	1	// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
	2
	3	/dts-v1/;
	4
	5	#include <dt-bindings/gpio/gpio.h>
	6	#include <dt-bindings/input/linux-event-codes.h>
	7	#include <dt-bindings/leds/common.h>
	8	#include <dt-bindings/pinctrl/rockchip.h>
	9	#include <dt-bindings/soc/rockchip,vop2.h>
	10	#include "rk3566.dtsi"
	11
	12	/ {
762f85bb TR	13	chassis-type = "handset";
762f85bb TR	14
93743d24 TR	15	aliases {
	16	mmc1 = &sdmmc0;
	17	mmc2 = &sdmmc1;
	18	mmc3 = &sdmmc2;
	19	};
	20
	21	adc-joystick {
	22	compatible = "adc-joystick";
	23	io-channels = <&adc_mux 0>,
	24	<&adc_mux 1>,
	25	<&adc_mux 2>,
	26	<&adc_mux 3>;
	27	pinctrl-0 = <&joy_mux_en>;
	28	pinctrl-names = "default";
	29	poll-interval = <60>;
	30	#address-cells = <1>;
	31	#size-cells = <0>;
	32
	33	axis@0 {
	34	reg = <0>;
	35	abs-flat = <32>;
	36	abs-fuzz = <32>;
	37	abs-range = <1023 15>;
	38	linux,code = <ABS_X>;
	39	};
	40
	41	axis@1 {
	42	reg = <1>;
	43	abs-flat = <32>;
	44	abs-fuzz = <32>;
	45	abs-range = <15 1023>;
	46	linux,code = <ABS_RX>;
	47	};
	48
	49	axis@2 {
	50	reg = <2>;
	51	abs-flat = <32>;
	52	abs-fuzz = <32>;
	53	abs-range = <15 1023>;
	54	linux,code = <ABS_Y>;
	55	};
	56
	57	axis@3 {
	58	reg = <3>;
	59	abs-flat = <32>;
	60	abs-fuzz = <32>;
	61	abs-range = <1023 15>;
	62	linux,code = <ABS_RY>;
	63	};
	64	};
	65
	66	adc_mux: adc-mux {
	67	compatible = "io-channel-mux";
	68	channels = "left_x", "right_x", "left_y", "right_y";
	69	#io-channel-cells = <1>;
	70	io-channels = <&saradc 3>;
	71	io-channel-names = "parent";
	72	mux-controls = <&gpio_mux>;
	73	settle-time-us = <100>;
	74	};
	75
	76	backlight: backlight {
	77	compatible = "pwm-backlight";
	78	power-supply = <&vcc_sys>;
79	pwms = <&pwm4 0 25000 0>;
80	};
81
82	battery: battery {
83	compatible = "simple-battery";
84	charge-full-design-microamp-hours = <3151000>;
85	charge-term-current-microamp = <300000>;
86	constant-charge-current-max-microamp = <2000000>;
87	constant-charge-voltage-max-microvolt = <4250000>;
88	factory-internal-resistance-micro-ohms = <117000>;
89	voltage-max-design-microvolt = <4172000>;
90	voltage-min-design-microvolt = <3400000>;
91
92	ocv-capacity-celsius = <20>;
93	ocv-capacity-table-0 = <4172000 100>, <4092000 95>, <4035000 90>, <3990000 85>,
94	<3939000 80>, <3895000 75>, <3852000 70>, <3807000 65>,
95	<3762000 60>, <3713000 55>, <3672000 50>, <3647000 45>,
96	<3629000 40>, <3613000 35>, <3598000 30>, <3578000 25>,
97	<3550000 20>, <3519000 15>, <3479000 10>, <3438000 5>,
98	<3400000 0>;
99	};
100
101	gpio_keys_control: gpio-keys-control {
102	compatible = "gpio-keys";
103	pinctrl-0 = <&btn_pins_ctrl>;
104	pinctrl-names = "default";
105
106	button-a {
107	gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
108	label = "EAST";
109	linux,code = <BTN_EAST>;
110	};
111
112	button-b {
113	gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>;
114	label = "SOUTH";
115	linux,code = <BTN_SOUTH>;
116	};
117
118	button-down {
119	gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>;
120	label = "DPAD-DOWN";
121	linux,code = <BTN_DPAD_DOWN>;
122	};
123
124	button-l1 {
125	gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
126	label = "TL";
127	linux,code = <BTN_TL>;
128	};
129
130	button-l2 {
131	gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
132	label = "TL2";
133	linux,code = <BTN_TL2>;
134	};
135
136	button-left {
137	gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
138	label = "DPAD-LEFT";
139	linux,code = <BTN_DPAD_LEFT>;
140	};
141
142	button-r1 {
143	gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
144	label = "TR";
145	linux,code = <BTN_TR>;
146	};
147
148	button-r2 {
149	gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
150	label = "TR2";
151	linux,code = <BTN_TR2>;
152	};
153
154	button-right {
155	gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
156	label = "DPAD-RIGHT";
157	linux,code = <BTN_DPAD_RIGHT>;
158	};
159
160	button-select {
161	gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
162	label = "SELECT";
163	linux,code = <BTN_SELECT>;
164	};
165
166	button-start {
167	gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>;
168	label = "START";
169	linux,code = <BTN_START>;
170	};
171
172	button-thumbl {
173	gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
174	label = "THUMBL";
175	linux,code = <BTN_THUMBL>;
176	};
177
178	button-thumbr {
179	gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
180	label = "THUMBR";
181	linux,code = <BTN_THUMBR>;
182	};
183
184	button-up {
185	gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
186	label = "DPAD-UP";
187	linux,code = <BTN_DPAD_UP>;
188	};
189
190	button-x {
191	gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
192	label = "NORTH";
193	linux,code = <BTN_NORTH>;
194	};
195
196	button-y {
197	gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
198	label = "WEST";
199	linux,code = <BTN_WEST>;
200	};
201	};
202
203	gpio_keys_vol: gpio-keys-vol {
204	compatible = "gpio-keys";
205	autorepeat;
206	pinctrl-0 = <&btn_pins_vol>;
207	pinctrl-names = "default";
208
209	button-vol-down {
210	gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
211	label = "VOLUMEDOWN";
212	linux,code = <KEY_VOLUMEDOWN>;
213	};
214
215	button-vol-up {
216	gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
217	label = "VOLUMEUP";
218	linux,code = <KEY_VOLUMEUP>;
219	};
220	};
221
222	gpio_mux: mux-controller {
223	compatible = "gpio-mux";
224	mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>,
225	<&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
226	#mux-control-cells = <0>;
227	};
228
229	hdmi-con {
230	compatible = "hdmi-connector";
231	ddc-i2c-bus = <&i2c5>;
232	type = "c";
233
234	port {
235	hdmi_con_in: endpoint {
236	remote-endpoint = <&hdmi_out_con>;
237	};
238	};
239	};
240
241	/*
242	* Device also includes an always on LED that is wired to the 5V input
243	* voltage and is on when the device is plugged in.
244	*/
245	leds: pwm-leds {
246	compatible = "pwm-leds";
247
248	green_led: led-0 {
249	color = <LED_COLOR_ID_GREEN>;
250	function = LED_FUNCTION_STATUS;
251	max-brightness = <255>;
252	pwms = <&pwm6 0 25000 0>;
253	};
254
255	red_led: led-1 {
256	color = <LED_COLOR_ID_RED>;
257	function = LED_FUNCTION_CHARGING;
258	max-brightness = <255>;
259	pwms = <&pwm7 0 25000 0>;
260	};
261	};
262
263	sdio_pwrseq: sdio-pwrseq {
264	compatible = "mmc-pwrseq-simple";
265	clocks = <&rk817 1>;
266	clock-names = "ext_clock";
267	pinctrl-0 = <&wifi_enable_h>;
268	pinctrl-names = "default";
269	post-power-on-delay-ms = <200>;
270	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
271	};
272
273	/*
274	* Channels reversed for speakers. Headphones automatically switch via hardware when
275	* detected with no ability to control output in software. Headphones appear to be mono
276	* (each output channel receives all audio). No microphone support on 3.5mm jack.
277	*/
278	sound {
279	compatible = "simple-audio-card";
280	simple-audio-card,name = "rk817_ext";
281	simple-audio-card,format = "i2s";
282	simple-audio-card,mclk-fs = <256>;
283	simple-audio-card,widgets =
284	"Headphone", "Headphones";
285	simple-audio-card,routing =
286	"Headphones", "HPOL",
287	"Headphones", "HPOR";
288
289	simple-audio-card,codec {
290	sound-dai = <&rk817>;
291	};
292
293	simple-audio-card,cpu {
294	sound-dai = <&i2s1_8ch>;
295	};
296	};
297
298	vcc3v3_lcd0_n: regulator-vcc3v3-lcd0 {
299	compatible = "regulator-fixed";
300	gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
301	enable-active-high;
302	pinctrl-0 = <&vcc_lcd_h>;
303	pinctrl-names = "default";
304	regulator-boot-on;
305	regulator-min-microvolt = <3300000>;
306	regulator-max-microvolt = <3300000>;
307	regulator-name = "vcc3v3_lcd0_n";
308	vin-supply = <&vcc_3v3>;
309	regulator-state-mem {
310	regulator-off-in-suspend;
311	};
312	};
313
314	vcc_sys: regulator-vcc-sys {
315	compatible = "regulator-fixed";
316	regulator-always-on;
317	regulator-boot-on;
318	regulator-min-microvolt = <3800000>;
319	regulator-max-microvolt = <3800000>;
320	regulator-name = "vcc_sys";
321	};
322
323	vcc_wifi: regulator-vcc-wifi {
324	compatible = "regulator-fixed";
325	enable-active-high;
326	gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
327	pinctrl-0 = <&vcc_wifi_h>;
328	pinctrl-names = "default";
329	regulator-always-on;
330	regulator-boot-on;
331	regulator-min-microvolt = <3300000>;
332	regulator-max-microvolt = <3300000>;
333	regulator-name = "vcc_wifi";
334	};
335	};
336
337	&combphy1 {
338	status = "okay";
339	};
340
341	&cpu0 {
342	cpu-supply = <&vdd_cpu>;
343	};
344
345	&cpu1 {
346	cpu-supply = <&vdd_cpu>;
347	};
348
349	&cpu2 {
350	cpu-supply = <&vdd_cpu>;
351	};
352
353	&cpu3 {
354	cpu-supply = <&vdd_cpu>;
355	};
356
357	&dsi0 {
358	status = "okay";
359	#address-cells = <1>;
360	#size-cells = <0>;
361
362	ports {
363	dsi0_in: port@0 {
364	reg = <0>;
365	dsi0_in_vp1: endpoint {
366	remote-endpoint = <&vp1_out_dsi0>;
367	};
368	};
369
370	dsi0_out: port@1 {
371	reg = <1>;
372	mipi_out_panel: endpoint {
373	remote-endpoint = <&mipi_in_panel>;
374	};
375	};
376	};
377	};
378
379	&dsi_dphy0 {
380	status = "okay";
381	};
382
383	&gpu {
384	mali-supply = <&vdd_gpu>;
385	status = "okay";
386	};
387
388	&hdmi {
389	ddc-i2c-bus = <&i2c5>;
390	pinctrl-0 = <&hdmitxm0_cec>;
391	pinctrl-names = "default";
392	status = "okay";
393	};
394
395	&hdmi_in {
396	hdmi_in_vp0: endpoint {
397	remote-endpoint = <&vp0_out_hdmi>;
398	};
399	};
400
401	&hdmi_out {
402	hdmi_out_con: endpoint {
403	remote-endpoint = <&hdmi_con_in>;
404	};
405	};
406
407	&hdmi_sound {
408	status = "okay";
409	};
410
411	&i2c0 {
412	status = "okay";
413
414	rk817: pmic@20 {
415	compatible = "rockchip,rk817";
416	reg = <0x20>;
417	interrupt-parent = <&gpio0>;
418	interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
419	clock-output-names = "rk808-clkout1", "rk808-clkout2";
420	clock-names = "mclk";
421	clocks = <&cru I2S1_MCLKOUT_TX>;
422	assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
423	assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
424	#clock-cells = <1>;
425	#sound-dai-cells = <0>;
426	pinctrl-names = "default";
427	pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>;
428	wakeup-source;
429
430	vcc1-supply = <&vcc_sys>;
431	vcc2-supply = <&vcc_sys>;
432	vcc3-supply = <&vcc_sys>;
433	vcc4-supply = <&vcc_sys>;
434	vcc5-supply = <&vcc_sys>;
435	vcc6-supply = <&vcc_sys>;
436	vcc7-supply = <&vcc_sys>;
437	vcc8-supply = <&vcc_sys>;
438	vcc9-supply = <&dcdc_boost>;
439
440	regulators {
441	vdd_logic: DCDC_REG1 {
442	regulator-always-on;
443	regulator-boot-on;
444	regulator-min-microvolt = <500000>;
445	regulator-max-microvolt = <1350000>;
446	regulator-ramp-delay = <6001>;
447	regulator-initial-mode = <0x2>;
448	regulator-name = "vdd_logic";
449	regulator-state-mem {
450	regulator-off-in-suspend;
451	regulator-suspend-microvolt = <900000>;
452	};
453	};
454
455	vdd_gpu: DCDC_REG2 {
456	regulator-always-on;
457	regulator-boot-on;
458	regulator-min-microvolt = <500000>;
459	regulator-max-microvolt = <1350000>;
460	regulator-ramp-delay = <6001>;
461	regulator-initial-mode = <0x2>;
462	regulator-name = "vdd_gpu";
463	regulator-state-mem {
464	regulator-off-in-suspend;
465	};
466	};
467
468	vcc_ddr: DCDC_REG3 {
469	regulator-always-on;
470	regulator-boot-on;
471	regulator-initial-mode = <0x2>;
472	regulator-name = "vcc_ddr";
473	regulator-state-mem {
474	regulator-on-in-suspend;
475	};
476	};
477
478	vcc_3v3: DCDC_REG4 {
479	regulator-always-on;
480	regulator-boot-on;
481	regulator-min-microvolt = <3300000>;
482	regulator-max-microvolt = <3300000>;
483	regulator-initial-mode = <0x2>;
484	regulator-name = "vcc_3v3";
485	regulator-state-mem {
486	regulator-on-in-suspend;
487	regulator-suspend-microvolt = <3300000>;
488	};
489	};
490
491	vcca1v8_pmu: LDO_REG1 {
492	regulator-always-on;
493	regulator-boot-on;
494	regulator-min-microvolt = <1800000>;
495	regulator-max-microvolt = <1800000>;
496	regulator-name = "vcca1v8_pmu";
497	regulator-state-mem {
498	regulator-on-in-suspend;
499	regulator-suspend-microvolt = <1800000>;
500	};
501	};
502
503	vdda_0v9: LDO_REG2 {
504	regulator-always-on;
505	regulator-boot-on;
506	regulator-min-microvolt = <900000>;
507	regulator-max-microvolt = <900000>;
508	regulator-name = "vdda_0v9";
509	regulator-state-mem {
510	regulator-off-in-suspend;
511	};
512	};
513
514	vdda0v9_pmu: LDO_REG3 {
515	regulator-always-on;
516	regulator-boot-on;
517	regulator-min-microvolt = <900000>;
518	regulator-max-microvolt = <900000>;
519	regulator-name = "vdda0v9_pmu";
520	regulator-state-mem {
521	regulator-on-in-suspend;
522	regulator-suspend-microvolt = <900000>;
523	};
524	};
525
526	vccio_acodec: LDO_REG4 {
527	regulator-always-on;
528	regulator-boot-on;
529	regulator-min-microvolt = <3300000>;
530	regulator-max-microvolt = <3300000>;
531	regulator-name = "vccio_acodec";
532	regulator-state-mem {
533	regulator-off-in-suspend;
534	};
535	};
536
537	vccio_sd: LDO_REG5 {
538	regulator-always-on;
539	regulator-boot-on;
540	regulator-min-microvolt = <1800000>;
541	regulator-max-microvolt = <3300000>;
542	regulator-name = "vccio_sd";
543	regulator-state-mem {
544	regulator-off-in-suspend;
545	};
546	};
547
548	vcc3v3_pmu: LDO_REG6 {
549	regulator-always-on;
550	regulator-boot-on;
551	regulator-min-microvolt = <3300000>;
552	regulator-max-microvolt = <3300000>;
553	regulator-name = "vcc3v3_pmu";
554	regulator-state-mem {
555	regulator-on-in-suspend;
556	regulator-suspend-microvolt = <3300000>;
557	};
558	};
559
560	vcc_1v8: LDO_REG7 {
561	regulator-always-on;
562	regulator-boot-on;
563	regulator-min-microvolt = <1800000>;
564	regulator-max-microvolt = <1800000>;
565	regulator-name = "vcc_1v8";
566	regulator-state-mem {
567	regulator-off-in-suspend;
568	};
569	};
570
571	vcc1v8_dvp: LDO_REG8 {
572	regulator-always-on;
573	regulator-boot-on;
574	regulator-min-microvolt = <1800000>;
575	regulator-max-microvolt = <3300000>;
576	regulator-name = "vcc1v8_dvp";
577	regulator-state-mem {
578	regulator-off-in-suspend;
579	};
580	};
581
582	vcc2v8_dvp: LDO_REG9 {
583	regulator-always-on;
584	regulator-boot-on;
585	regulator-min-microvolt = <2800000>;
586	regulator-max-microvolt = <2800000>;
587	regulator-name = "vcc2v8_dvp";
588	regulator-state-mem {
589	regulator-off-in-suspend;
590	};
591	};
592
593	dcdc_boost: BOOST {
594	regulator-always-on;
595	regulator-boot-on;
596	regulator-min-microvolt = <4700000>;
597	regulator-max-microvolt = <5400000>;
598	regulator-name = "boost";
599	regulator-state-mem {
600	regulator-off-in-suspend;
601	};
602	};
603
604	otg_switch: OTG_SWITCH {
605	regulator-name = "otg_switch";
606	regulator-state-mem {
607	regulator-off-in-suspend;
608	};
609	};
610	};
611
612	rk817_charger: charger {
613	monitored-battery = <&battery>;
614	rockchip,resistor-sense-micro-ohms = <10000>;
615	rockchip,sleep-enter-current-microamp = <300000>;
616	rockchip,sleep-filter-current-microamp = <100000>;
617	};
618	};
93743d24 TR	619	};
	620
	621	&i2c5 {
	622	pinctrl-0 = <&i2c5m1_xfer>;
	623	pinctrl-names = "default";
	624	status = "okay";
	625	};
	626
	627	&i2s0_8ch {
	628	status = "okay";
	629	};
	630
	631	&i2s1_8ch {
	632	pinctrl-0 = <&i2s1m0_sclktx
	633	&i2s1m0_lrcktx
	634	&i2s1m0_sdi0
	635	&i2s1m0_sdo0>;
	636	pinctrl-names = "default";
	637	rockchip,trcm-sync-tx-only;
	638	status = "okay";
	639	};
	640
	641	&pinctrl {
	642	gpio-btns {
	643	btn_pins_ctrl: btn-pins-ctrl {
	644	rockchip,pins =
	645	<3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
	646	<3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
	647	<3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
	648	<3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
	649	<3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
	650	<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
	651	<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
	652	<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
	653	<3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
	654	<3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
	655	<3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
	656	<3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
	657	<3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>,
	658	<3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>,
	659	<3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>,
	660	<3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
	661	};
	662
	663	btn_pins_vol: btn-pins-vol {
	664	rockchip,pins =
	665	<3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
	666	<3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
	667	};
	668	};
	669
	670	joy-mux {
	671	joy_mux_en: joy-mux-en {
	672	rockchip,pins =
	673	<0 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>;
	674	};
	675	};
	676
	677	gpio-lcd {
	678	lcd_rst: lcd-rst {
	679	rockchip,pins =
	680	<4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
	681	};
	682	};
683
684	pmic {
685	pmic_int_l: pmic-int-l {
686	rockchip,pins =
687	<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
688	};
689	};
690
691	sdio-pwrseq {
692	wifi_enable_h: wifi-enable-h {
693	rockchip,pins =
694	<4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
695	};
696	};
697
698	vcc3v3-lcd {
699	vcc_lcd_h: vcc-lcd-h {
700	rockchip,pins =
701	<0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
702	};
703	};
704
705	vcc-wifi {
706	vcc_wifi_h: vcc-wifi-h {
707	rockchip,pins =
708	<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
709	};
710	};
711	};
712
713	&pmu_io_domains {
714	status = "okay";
715	pmuio1-supply = <&vcc3v3_pmu>;
716	pmuio2-supply = <&vcc3v3_pmu>;
717	vccio1-supply = <&vccio_acodec>;
718	vccio3-supply = <&vccio_sd>;
719	vccio4-supply = <&vcc_1v8>;
720	vccio5-supply = <&vcc_3v3>;
721	vccio6-supply = <&vcc1v8_dvp>;
722	vccio7-supply = <&vcc_3v3>;
723	};
724
725	&pwm4 {
726	status = "okay";
727	};
728
729	&pwm6 {
730	status = "okay";
731	};
732
733	&pwm7 {
734	status = "okay";
735	};
736
737	&saradc {
738	vref-supply = <&vcc_1v8>;
739	status = "okay";
740	};
741
742	&sdmmc0 {
743	bus-width = <4>;
744	cap-sd-highspeed;
745	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
746	disable-wp;
747	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
748	pinctrl-names = "default";
749	sd-uhs-sdr104;
750	vmmc-supply = <&vcc_3v3>;
751	vqmmc-supply = <&vccio_sd>;
752	status = "okay";
753	};
754
755	&sdmmc1 {
756	bus-width = <4>;
757	cap-sd-highspeed;
758	cd-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>;
759	disable-wp;
760	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &sdmmc1_det>;
761	pinctrl-names = "default";
762	sd-uhs-sdr104;
763	vmmc-supply = <&vcc_3v3>;
764	vqmmc-supply = <&vcc1v8_dvp>;
765	status = "okay";
766	};
767
768	&sdmmc2 {
769	bus-width = <4>;
770	cap-sd-highspeed;
771	cap-sdio-irq;
772	keep-power-in-suspend;
773	mmc-pwrseq = <&sdio_pwrseq>;
774	non-removable;
775	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
776	pinctrl-names = "default";
777	vmmc-supply = <&vcc_wifi>;
778	vqmmc-supply = <&vcca1v8_pmu>;
779	status = "okay";
780	};
781
782	&tsadc {
783	rockchip,hw-tshut-mode = <1>;
784	rockchip,hw-tshut-polarity = <0>;
785	status = "okay";
786	};
787
788	&uart1 {
789	pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn &uart1m1_rtsn>;
790	pinctrl-names = "default";
791	uart-has-rtscts;
792	status = "okay";
793
6bb92fcf	794	bluetooth: bluetooth {
93743d24 TR	795	compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
	796	device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
	797	enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
	798	host-wake-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
	799	};
	800	};
	801
	802	&usb_host0_xhci {
	803	dr_mode = "peripheral";
	804	phys = <&usb2phy0_otg>;
	805	phy-names = "usb2-phy";
	806	status = "okay";
	807	};
	808
	809	&usb_host1_ehci {
	810	status = "okay";
	811	};
	812
	813	&usb_host1_ohci {
	814	status = "okay";
	815	};
	816
	817	&usb_host1_xhci {
	818	phy-names = "usb2-phy", "usb3-phy";
	819	phys = <&usb2phy1_host>, <&combphy1 PHY_TYPE_USB3>;
	820	status = "okay";
	821	};
	822
	823	&usb2phy0 {
	824	status = "okay";
	825	};
	826
	827	&usb2phy0_otg {
	828	status = "okay";
	829	};
	830
	831	&usb2phy1 {
	832	status = "okay";
	833	};
	834
	835	&usb2phy1_host {
	836	status = "okay";
	837	};
	838
	839	&vop {
	840	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
	841	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
	842	status = "okay";
	843	};
	844
	845	&vop_mmu {
	846	status = "okay";
	847	};
	848
	849	&vp0 {
	850	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
	851	reg = <ROCKCHIP_VOP2_EP_HDMI0>;
	852	remote-endpoint = <&hdmi_in_vp0>;
	853	};
	854	};
	855
	856	&vp1 {
	857	vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
	858	reg = <ROCKCHIP_VOP2_EP_MIPI0>;
859	remote-endpoint = <&dsi0_in_vp1>;
860	};
861	};