microblaze: Detect NOR flash based on DT

[u-boot.git] / configs / apf27_defconfig

CONFIG_ARM=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
CONFIG_TARGET_APF27=y
CONFIG_SYS_TEXT_BASE=0xA0000800
CONFIG_NR_DRAM_BANKS=2
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_OFFSET=0x100000
CONFIG_SPL_TEXT_BASE=0xA0000000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x180000
CONFIG_IDENT_STRING=" apf27 patch 3.10"
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_BOOTDELAY=5
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttySMX0,115200 mtdparts=mxc_nand.0:1M(u-boot)ro,512K(env),512K(env2),512K(firmware),512K(dtb),5M(kernel),-(rootfs) ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs "
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="run check_flash check_env;"
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="BIOS> "
CONFIG_CMD_ASKENV=y
CONFIG_CMD_EEPROM=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND_TRIMFFS=y
CONFIG_CMD_NAND_LOCK_UNLOCK=y
CONFIG_CMD_DHCP=y
CONFIG_BOOTP_DNS2=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_DNS=y
CONFIG_CMD_BSP=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_DATE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=mxc_nand.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=mxc_nand.0:1M(u-boot)ro,512K(env),512K(env2),512K(firmware),512K(dtb),5M(kernel),-(rootfs)"
CONFIG_CMD_UBI=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_VERSION_VARIABLE=y
CONFIG_FPGA_XILINX=y
CONFIG_FPGA_SPARTAN3=y
CONFIG_MXC_GPIO=y
CONFIG_MMC_MXC=y
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
CONFIG_NAND_MXC=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_MII=y
CONFIG_MXC_UART=y
CONFIG_OF_LIBFDT=y