[u-boot.git] / include / configs / FPS860L.h

/*
 * (C) Copyright 2000-2005
 * Wolfgang Denk, DENX Software Engineering, [email protected].
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 * (easy to change)
 */

#define CONFIG_MPC860		1	/* This is a MPC860 CPU		*/
#define CONFIG_FPS860L		1	/* ...on a FingerPrint Sensor	*/

#undef	CONFIG_8xx_CONS_SMC1
#define	CONFIG_8xx_CONS_SMC2	1	/* Console is on SMC2		*/
#undef	CONFIG_8xx_CONS_NONE
#define CONFIG_BAUDRATE		115200

#define	CONFIG_BOOTCOUNT_LIMIT

#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/

#define CONFIG_BOARD_TYPES	1	/* support board types		*/

#define CONFIG_PREBOOT	"echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"

#undef	CONFIG_BOOTARGS

#define	CONFIG_EXTRA_ENV_SETTINGS					\
	"netdev=eth0\0"							\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
		"nfsroot=${serverip}:${rootpath}\0"			\
	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
	"addip=setenv bootargs ${bootargs} "				\
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
		":${hostname}:${netdev}:off panic=1\0"			\
	"flash_nfs=run nfsargs addip;"					\
		"bootm ${kernel_addr}\0"				\
	"flash_self=run ramargs addip;"					\
		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
	"rootpath=/opt/eldk/ppc_8xx\0"					\
	"bootfile=/tftpboot/fps850L/uImage\0"				\
	"fdt_addr=40040000\0"						\
	"kernel_addr=40060000\0"					\
	"ramdisk_addr=40200000\0"					\
	""
#define CONFIG_BOOTCOMMAND	"run flash_self"

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/

#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_NISDOMAIN
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_DNS
#define CONFIG_BOOTP_DNS2
#define CONFIG_BOOTP_SEND_HOSTNAME
#define CONFIG_BOOTP_NTPSERVER
#define CONFIG_BOOTP_TIMEOFFSET

#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/

/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_NFS
#define CONFIG_CMD_SNTP


/*
 * Miscellaneous configurable options
 */
#define	CFG_LONGHELP			/* undef to save memory		*/
#define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/

#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
#ifdef	CFG_HUSH_PARSER
#define	CFG_PROMPT_HUSH_PS2	"> "
#endif

#if defined(CONFIG_CMD_KGDB)
#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
#else
#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
#endif
#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define	CFG_MAXARGS	16		/* max number of command args	*/
#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/

#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/

#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/

#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/

#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

/*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
 * You should know what you are doing if you make changes here.
 */
/*-----------------------------------------------------------------------
 * Internal Memory Mapped Register
 */
#define CFG_IMMR		0xFFF00000

/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in DPRAM)
 */
#define CFG_INIT_RAM_ADDR	CFG_IMMR
#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CFG_SDRAM_BASE _must_ start at 0
 */
#define	CFG_SDRAM_BASE		0x00000000
#define CFG_FLASH_BASE		0x40000000
#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
#define CFG_MONITOR_BASE	CFG_FLASH_BASE
#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/

/*-----------------------------------------------------------------------
 * FLASH organization
 */
#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
#define CFG_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/

#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/

#define	CFG_ENV_IS_IN_FLASH	1
#define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/

/* Address and size of Redundant Environment Sector	*/
#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)

/*-----------------------------------------------------------------------
 * Hardware Information Block
 */
#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
#define CFG_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */

/*-----------------------------------------------------------------------
 * Cache Configuration
 */
#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
#endif

/*-----------------------------------------------------------------------
 * SYPCR - System Protection Control				11-9
 * SYPCR can only be written once after reset!
 *-----------------------------------------------------------------------
 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 */
#if defined(CONFIG_WATCHDOG)
#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
#else
#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
#endif

/*-----------------------------------------------------------------------
 * SIUMCR - SIU Module Configuration				11-6
 *-----------------------------------------------------------------------
 * PCMCIA config., multi-function pin tri-state
 */
#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)

/*-----------------------------------------------------------------------
 * TBSCR - Time Base Status and Control				11-26
 *-----------------------------------------------------------------------
 * Clear Reference Interrupt Status, Timebase freezing enabled
 */
#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)

/*-----------------------------------------------------------------------
 * RTCSC - Real-Time Clock Status and Control Register		11-27
 *-----------------------------------------------------------------------
 */
#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)

/*-----------------------------------------------------------------------
 * PISCR - Periodic Interrupt Status and Control		11-31
 *-----------------------------------------------------------------------
 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 */
#define CFG_PISCR	(PISCR_PS | PISCR_PITF)

/*-----------------------------------------------------------------------
 * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
 *-----------------------------------------------------------------------
 * Reset PLL lock status sticky bit, timer expired status bit and timer
 * interrupt status bit - leave PLL multiplication factor unchanged !
 */
#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)

/*-----------------------------------------------------------------------
 * SCCR - System Clock and reset Control Register		15-27
 *-----------------------------------------------------------------------
 * Set clock output, timebase and RTC source and divider,
 * power management and some other internal clocks
 */
#define SCCR_MASK	SCCR_EBDF11
#define CFG_SCCR	(SCCR_TBS     | \
			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
			 SCCR_DFALCD00)

/*-----------------------------------------------------------------------
 * PCMCIA stuff
 *-----------------------------------------------------------------------
 *
 */
#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )

/*-----------------------------------------------------------------------
 *
 *-----------------------------------------------------------------------
 *
 */
#define CFG_DER	0

/*
 * Init Memory Controller:
 *
 * BR0/1 and OR0/1 (FLASH)
 */

#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
#define FLASH_BASE1_PRELIM	0x60000000	/* FLASH bank #0	*/

/* used to re-map FLASH both when starting from SRAM or FLASH:
 * restrict access enough to keep SRAM working (if any)
 * but not too much to meddle with FLASH accesses
 */
#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */

/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV2 | OR_BI | \
				 OR_SCY_5_CLK | OR_EHTR)

#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )

#define CFG_OR1_REMAP	CFG_OR0_REMAP
#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )

/*
 * BR2/3 and OR2/3 (SDRAM)
 *
 */
#define SDRAM_BASE2_PRELIM	0x00000000	/* SDRAM bank #0	*/
#define SDRAM_BASE3_PRELIM	0x20000000	/* SDRAM bank #1	*/
#define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/

/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
#define CFG_OR_TIMING_SDRAM	0x00000A00

#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )

#define	CFG_OR3_PRELIM	CFG_OR2_PRELIM
#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )

/*
 * Memory Periodic Timer Prescaler
 */

/* periodic timer for refresh */
#define CFG_MAMR_PTA	97		/* start with divider for 100 MHz	*/

/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/

/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/

/*
 * MAMR settings for SDRAM
 */

/* 8 column SDRAM */
#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
/* 9 column SDRAM */
#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)


/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
#define BOOTFLAG_WARM	0x02		/* Software reboot			*/

#endif	/* __CONFIG_H */
Commit	Line	Data
384ae025	1	/*
414eec35	2	* (C) Copyright 2000-2005
384ae025 WD	3	* Wolfgang Denk, DENX Software Engineering, [email protected].
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	/*
	25	* board/config.h - configuration options, board specific
	26	*/
	27
	28	#ifndef __CONFIG_H
	29	#define __CONFIG_H
	30
	31	/*
	32	* High Level Configuration Options
	33	* (easy to change)
	34	*/
	35
	36	#define CONFIG_MPC860 1 /* This is a MPC860 CPU */
	37	#define CONFIG_FPS860L 1 /* ...on a FingerPrint Sensor */
	38
	39	#undef CONFIG_8xx_CONS_SMC1
	40	#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */
	41	#undef CONFIG_8xx_CONS_NONE
	42	#define CONFIG_BAUDRATE 115200
eb6da805 WD	43
	44	#define CONFIG_BOOTCOUNT_LIMIT
	45
384ae025	46	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
384ae025	47
384ae025 WD	48	#define CONFIG_BOARD_TYPES 1 /* support board types */
384ae025 WD	49
eb6da805 WD	50	#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
	51
	52	#undef CONFIG_BOOTARGS
	53
	54	#define CONFIG_EXTRA_ENV_SETTINGS \
	55	"netdev=eth0\0" \
	56	"nfsargs=setenv bootargs root=/dev/nfs rw " \
	57	"nfsroot=${serverip}:${rootpath}\0" \
	58	"ramargs=setenv bootargs root=/dev/ram rw\0" \
	59	"addip=setenv bootargs ${bootargs} " \
	60	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	61	":${hostname}:${netdev}:off panic=1\0" \
	62	"flash_nfs=run nfsargs addip;" \
	63	"bootm ${kernel_addr}\0" \
	64	"flash_self=run ramargs addip;" \
	65	"bootm ${kernel_addr} ${ramdisk_addr}\0" \
	66	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
	67	"rootpath=/opt/eldk/ppc_8xx\0" \
	68	"bootfile=/tftpboot/fps850L/uImage\0" \
	69	"fdt_addr=40040000\0" \
	70	"kernel_addr=40060000\0" \
	71	"ramdisk_addr=40200000\0" \
	72	""
	73	#define CONFIG_BOOTCOMMAND "run flash_self"
384ae025 WD	74
	75	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
	76	#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
	77
	78	#undef CONFIG_WATCHDOG /* watchdog disabled */
	79
5d2ebe1b JL	80	/*
	81	* BOOTP options
	82	*/
	83	#define CONFIG_BOOTP_SUBNETMASK
	84	#define CONFIG_BOOTP_GATEWAY
	85	#define CONFIG_BOOTP_HOSTNAME
	86	#define CONFIG_BOOTP_BOOTPATH
	87	#define CONFIG_BOOTP_BOOTFILESIZE
	88	#define CONFIG_BOOTP_SUBNETMASK
	89	#define CONFIG_BOOTP_GATEWAY
	90	#define CONFIG_BOOTP_HOSTNAME
	91	#define CONFIG_BOOTP_NISDOMAIN
	92	#define CONFIG_BOOTP_BOOTPATH
	93	#define CONFIG_BOOTP_DNS
	94	#define CONFIG_BOOTP_DNS2
	95	#define CONFIG_BOOTP_SEND_HOSTNAME
	96	#define CONFIG_BOOTP_NTPSERVER
	97	#define CONFIG_BOOTP_TIMEOFFSET
384ae025 WD	98
	99	#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
	100
60a0876b JL	101	/*
	102	* Command line configuration.
	103	*/
	104	#include <config_cmd_default.h>
eb6da805	105
60a0876b JL	106	#define CONFIG_CMD_ASKENV
	107	#define CONFIG_CMD_DATE
	108	#define CONFIG_CMD_DHCP
	109	#define CONFIG_CMD_NFS
	110	#define CONFIG_CMD_SNTP
	111
384ae025 WD	112
	113	/*
	114	* Miscellaneous configurable options
	115	*/
	116	#define CFG_LONGHELP /* undef to save memory */
eb6da805 WD	117	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
	118
	119	#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
	120	#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */
	121	#ifdef CFG_HUSH_PARSER
	122	#define CFG_PROMPT_HUSH_PS2 "> "
	123	#endif
	124
60a0876b	125	#if defined(CONFIG_CMD_KGDB)
384ae025 WD	126	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
	127	#else
	128	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	129	#endif
	130	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	131	#define CFG_MAXARGS 16 /* max number of command args */
	132	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
	133
	134	#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
	135	#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
	136
	137	#define CFG_LOAD_ADDR 0x100000 /* default load address */
	138
	139	#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
	140
	141	#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
	142
	143	/*
	144	* Low Level Configuration Settings
	145	* (address mappings, register initial values, etc.)
	146	* You should know what you are doing if you make changes here.
	147	*/
	148	/*-----------------------------------------------------------------------
	149	* Internal Memory Mapped Register
	150	*/
	151	#define CFG_IMMR 0xFFF00000
	152
	153	/*-----------------------------------------------------------------------
	154	* Definitions for initial stack pointer and data area (in DPRAM)
	155	*/
	156	#define CFG_INIT_RAM_ADDR CFG_IMMR
	157	#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
	158	#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
	159	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
	160	#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
	161
	162	/*-----------------------------------------------------------------------
	163	* Start addresses for the final memory configuration
	164	* (Set up by the startup code)
	165	* Please note that CFG_SDRAM_BASE _must_ start at 0
	166	*/
	167	#define CFG_SDRAM_BASE 0x00000000
	168	#define CFG_FLASH_BASE 0x40000000
	169	#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
	170	#define CFG_MONITOR_BASE CFG_FLASH_BASE
	171	#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
	172
	173	/*
	174	* For booting Linux, the board info and command line data
	175	* have to be in the first 8 MB of memory, since this is
	176	* the maximum mapped by the Linux kernel during initialization.
	177	*/
	178	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
	179
	180	/*-----------------------------------------------------------------------
	181	* FLASH organization
	182	*/
	183	#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
	184	#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
	185
	186	#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
	187	#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
	188
	189	#define CFG_ENV_IS_IN_FLASH 1
190	#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
191	#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
192
193	/* Address and size of Redundant Environment Sector */
194	#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE)
195	#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
196
197	/*-----------------------------------------------------------------------
198	* Hardware Information Block
199	*/
200	#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
201	#define CFG_HWINFO_SIZE 0x00000040 /* size of HW Info block */
202	#define CFG_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
203
204	/*-----------------------------------------------------------------------
205	* Cache Configuration
206	*/
207	#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
60a0876b	208	#if defined(CONFIG_CMD_KGDB)
384ae025 WD	209	#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
	210	#endif
	211
	212	/*-----------------------------------------------------------------------
	213	* SYPCR - System Protection Control 11-9
	214	* SYPCR can only be written once after reset!
	215	*-----------------------------------------------------------------------
	216	* Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
	217	*/
	218	#if defined(CONFIG_WATCHDOG)
	219	#define CFG_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_BME \| SYPCR_SWF \| \
	220	SYPCR_SWE \| SYPCR_SWRI\| SYPCR_SWP)
	221	#else
	222	#define CFG_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_BME \| SYPCR_SWF \| SYPCR_SWP)
	223	#endif
	224
	225	/*-----------------------------------------------------------------------
	226	* SIUMCR - SIU Module Configuration 11-6
	227	*-----------------------------------------------------------------------
	228	* PCMCIA config., multi-function pin tri-state
	229	*/
	230	#define CFG_SIUMCR (SIUMCR_DBGC00 \| SIUMCR_DBPC00 \| SIUMCR_MLRC01)
	231
	232	/*-----------------------------------------------------------------------
	233	* TBSCR - Time Base Status and Control 11-26
	234	*-----------------------------------------------------------------------
	235	* Clear Reference Interrupt Status, Timebase freezing enabled
	236	*/
	237	#define CFG_TBSCR (TBSCR_REFA \| TBSCR_REFB \| TBSCR_TBF)
	238
	239	/*-----------------------------------------------------------------------
	240	* RTCSC - Real-Time Clock Status and Control Register 11-27
	241	*-----------------------------------------------------------------------
	242	*/
	243	#define CFG_RTCSC (RTCSC_SEC \| RTCSC_ALR \| RTCSC_RTF\| RTCSC_RTE)
	244
	245	/*-----------------------------------------------------------------------
	246	* PISCR - Periodic Interrupt Status and Control 11-31
	247	*-----------------------------------------------------------------------
	248	* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
	249	*/
	250	#define CFG_PISCR (PISCR_PS \| PISCR_PITF)
	251
	252	/*-----------------------------------------------------------------------
	253	* PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
	254	*-----------------------------------------------------------------------
	255	* Reset PLL lock status sticky bit, timer expired status bit and timer
	256	* interrupt status bit - leave PLL multiplication factor unchanged !
	257	*/
	258	#define CFG_PLPRCR (PLPRCR_SPLSS \| PLPRCR_TEXPS \| PLPRCR_TMIST)
	259
	260	/*-----------------------------------------------------------------------
	261	* SCCR - System Clock and reset Control Register 15-27
	262	*-----------------------------------------------------------------------
	263	* Set clock output, timebase and RTC source and divider,
	264	* power management and some other internal clocks
	265	*/
	266	#define SCCR_MASK SCCR_EBDF11
	267	#define CFG_SCCR (SCCR_TBS \| \
	268	SCCR_COM00 \| SCCR_DFSYNC00 \| SCCR_DFBRG00 \| \
	269	SCCR_DFNL000 \| SCCR_DFNH000 \| SCCR_DFLCD000 \| \
	270	SCCR_DFALCD00)
	271
	272	/*-----------------------------------------------------------------------
273	* PCMCIA stuff
274	*-----------------------------------------------------------------------
275	*
276	*/
277	#define CFG_PCMCIA_MEM_ADDR (0xE0000000)
278	#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
279	#define CFG_PCMCIA_DMA_ADDR (0xE4000000)
280	#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 )
281	#define CFG_PCMCIA_ATTRB_ADDR (0xE8000000)
282	#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 )
283	#define CFG_PCMCIA_IO_ADDR (0xEC000000)
284	#define CFG_PCMCIA_IO_SIZE ( 64 << 20 )
285
286	/*-----------------------------------------------------------------------
287	*
288	*-----------------------------------------------------------------------
289	*
290	*/
384ae025 WD	291	#define CFG_DER 0
	292
	293	/*
	294	* Init Memory Controller:
	295	*
	296	* BR0/1 and OR0/1 (FLASH)
	297	*/
	298
	299	#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
	300	#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */
	301
	302	/* used to re-map FLASH both when starting from SRAM or FLASH:
	303	* restrict access enough to keep SRAM working (if any)
	304	* but not too much to meddle with FLASH accesses
	305	*/
	306	#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
	307	#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
	308
	309	/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */
	310	#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM \| OR_ACS_DIV2 \| OR_BI \| \
	311	OR_SCY_5_CLK \| OR_EHTR)
	312
	313	#define CFG_OR0_REMAP (CFG_REMAP_OR_AM \| CFG_OR_TIMING_FLASH)
	314	#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM \| CFG_OR_TIMING_FLASH)
	315	#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) \| BR_V )
	316
	317	#define CFG_OR1_REMAP CFG_OR0_REMAP
	318	#define CFG_OR1_PRELIM CFG_OR0_PRELIM
	319	#define CFG_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) \| BR_V )
	320
	321	/*
	322	* BR2/3 and OR2/3 (SDRAM)
	323	*
	324	*/
	325	#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */
	326	#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */
	327	#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
	328
	329	/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
	330	#define CFG_OR_TIMING_SDRAM 0x00000A00
	331
	332	#define CFG_OR2_PRELIM (CFG_PRELIM_OR_AM \| CFG_OR_TIMING_SDRAM )
	333	#define CFG_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) \| BR_MS_UPMA \| BR_V )
	334
	335	#define CFG_OR3_PRELIM CFG_OR2_PRELIM
	336	#define CFG_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) \| BR_MS_UPMA \| BR_V )
	337
	338	/*
	339	* Memory Periodic Timer Prescaler
	340	*/
	341
	342	/* periodic timer for refresh */
	343	#define CFG_MAMR_PTA 97 /* start with divider for 100 MHz */
	344
	345	/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
	346	#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
	347	#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
	348
	349	/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
	350	#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
	351	#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
	352
	353	/*
	354	* MAMR settings for SDRAM
355	*/
356
357	/* 8 column SDRAM */
358	#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) \| MAMR_PTAE \| \
359	MAMR_AMA_TYPE_0 \| MAMR_DSA_1_CYCL \| MAMR_G0CLA_A11 \| \
360	MAMR_RLFA_1X \| MAMR_WLFA_1X \| MAMR_TLFA_4X)
361	/* 9 column SDRAM */
362	#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) \| MAMR_PTAE \| \
363	MAMR_AMA_TYPE_1 \| MAMR_DSA_1_CYCL \| MAMR_G0CLA_A10 \| \
364	MAMR_RLFA_1X \| MAMR_WLFA_1X \| MAMR_TLFA_4X)
365
366
367	/*
368	* Internal Definitions
369	*
370	* Boot Flags
371	*/
372	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
373	#define BOOTFLAG_WARM 0x02 /* Software reboot */
374
375	#endif /* __CONFIG_H */