]> Git Repo - u-boot.git/blame - CHANGELOG
projects / u-boot.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
Add ability to take MAC address from the environment to DM9000 driver
[u-boot.git] / CHANGELOG
CommitLineData
be5d72d1
WD		 1commit a08458303e7f9db67f296980036d3292c35cb45c
2Author: Haavard Skinnemoen <[email protected]>
3Date: Fri Jun 29 18:38:51 2007 +0200
4
5 atmel_mci: Fix data timeout value
6
7 Calculate the data timeout based on values from the CSD instead of
8 just using a hardcoded DTOR value. This is a backport of a similar fix
9 in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
10 instead of down.
11
12 Signed-off-by: Haavard Skinnemoen <[email protected]>
13
14commit 0ba8eed28b575626b17e0a7882f923b83e0d7584
15Author: Haavard Skinnemoen <[email protected]>
16Date: Mon Aug 13 17:22:31 2007 +0200
17
18 AVR32: Include <div64.h> instead of <asm/div64.h>
19
20 include/asm-avr32/div64.h was recently moved to include/div64.h, but
21 cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
22 the patch was merged perhaps?)
23
24 This patch updates cpu/at32ap/interrupts.c so that the avr32 port
25 compiles again.
26
27 Signed-off-by: Haavard Skinnemoen <[email protected]>
28
29commit f0d1246ed7cb5a88522244c596d7ae7e6f161283
30Author: Haavard Skinnemoen <[email protected]>
31Date: Wed Jun 27 13:34:26 2007 +0200
32
33 atmel_mci: Use 512 byte blocksize if possible
34
35 Instead of always using the largest blocksize the card supports, check
36 if it can support smaller block sizes and use 512 bytes if possible.
37 Most cards do support this, and other parts of u-boot seem to have
38 trouble with block sizes different from 512 bytes.
39
40 Also enable underrun/overrun protection.
41
42 Signed-off-by: Haavard Skinnemoen <[email protected]>
43 Acked-by: Hans-Christian Egtvedt <[email protected]>
44
45commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
46Author: Wolfgang Denk <[email protected]>
47Date: Sun Aug 12 21:34:50 2007 +0200
48
49 Update CHANGELOG
50
9986bc3e
WD		 51commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
52Author: Wolfgang Denk <[email protected]>
53Date: Sun Aug 12 21:34:34 2007 +0200
54
55 Minor alignment of output, 2nd try.
56 Also update CHANGELOG
57
58 Signed-off-by: Wolfgang Denk <[email protected]>
59
60commit 6b309f22a724fad8418e811751a0741b893419cf
61Author: Wolfgang Denk <[email protected]>
62Date: Sun Aug 12 20:35:49 2007 +0200
63
64 Minor alignment of output
65
66 Signed-off-by: Wolfgang Denk <[email protected]>
67
68commit 6f6d7b9c8559e241e8d232621542b8b59699b07b
69Author: Wolfgang Denk <[email protected]>
70Date: Sun Aug 12 18:28:18 2007 +0200
71
72 Cleanup output on ADS5121 board
73
74 Signed-off-by: Wolfgang Denk
75
76commit a4d2636f2a859245ed3a401f26189da2dfda4ceb
77Author: Wolfgang Denk <[email protected]>
78Date: Sun Aug 12 15:11:38 2007 +0200
79
80 Adapt board configuration and fix kernel crash on MCC200 board.
81
82 The update procedure was modified to turn off the USB subsystem
83 before exit for MCC200 and TRAB. This is necessary as otherwise the
84 USB controller continues to write periodically to system memory!
85
86 MCC200-specific notes:
87 - the patch disables the magic key check for MCC200
88 - the patch contains the configuration changes made
89 for the new revision of the board.
90
91 Signed-off-by: Sergei Poselenov <[email protected]>
92 Signed-off-by: Wolfgang Denk <[email protected]>
93
94commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf
95Author: Wolfgang Denk <[email protected]>
96Date: Sun Aug 12 14:47:54 2007 +0200
97
98 Adjust default configuration of ADS5121 board.
99
100 Signed-off-by: Wolfgang Denk <[email protected]>
101
102commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9
103Author: Wolfgang Denk <[email protected]>
104Date: Sun Aug 12 14:27:39 2007 +0200
105
106 Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
107
108 Signed-off-by: Wolfgang Denk <[email protected]>
109
110commit 5fe6be6208dda852c3564e384bd78d75784dea3e
111Author: Gerald Van Baren <[email protected]>
112Date: Tue Aug 7 21:14:22 2007 -0400
113
114 Improve error print messages.
115
116 Signed-off-by: Gerald Van Baren <[email protected]>
117
118commit 99dffca3b7590a16a00bc475c860b67b2a3f1462
119Author: Kim Phillips <[email protected]>
120Date: Tue Jul 17 13:57:04 2007 -0500
121
122 fdt: allow for builds that don't want env and bd_t nodes
123
124 protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
125 area.
126
127 Signed-off-by: Kim Phillips <[email protected]>
128
129commit 91148bf7aeba142d6f348805db7625db7da64d6f
130Author: Kim Phillips <[email protected]>
131Date: Tue Jul 17 13:56:53 2007 -0500
132
133 fdt: do board setup based on fdt address specified on bootm line
134
135 The last fdt patch to bootm did board setup based on the address
136 specified by a prior fdt address command invocation. The bootm
137 code, as its call to fdt_chosen does, should use the fdt specified
138 by the user on the bootm command. Note this restores full
139 functionality for the 8360's existing default boot environment
140 values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
141 before booting a kernel).
142
143 Signed-off-by: Kim Phillips <[email protected]>
144
145commit e125a2ffc209dd34794e326c7175658253beadf3
146Author: Gerald Van Baren <[email protected]>
147Date: Tue Jul 10 20:40:39 2007 -0400
148
149 Call ft_board_setup() from the bootm command.
150
151 In the patch titled "Create new fdt boardsetup command..." I removed the
152 call to ft_board_setup() from the routine fdt_chosen(), but I forgot
153 to add a direct call back into cmd_bootm.c
154
155 This fixes the oversight by adding the direct call to the bootm command.
156
157 Signed-off-by: Gerald Van Baren <[email protected]>
158
159commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845
160Author: Gerald Van Baren <[email protected]>
161Date: Mon Jun 25 23:25:28 2007 -0400
162
163 Create new fdt boardsetup command, fix bug parsing [] form of set values.
164
165 Previously ft_board_setup() was called by fdt_chosen() which was not
166 really correctly structured. This splits ft_board_setup() out by creating
167 a new fdt boardsetup command.
168
169 Fix a bug when parsing fdt set command values which have the square
170 bracket form [00 11 22 33] - the length was updated incorrectly in when
171 parsing that form.
172
173 Signed-off-by: Gerald Van Baren <[email protected]>
174
175commit 6f35ded9e85493595e0eb66a82b502a95326d049
176Author: Gerald Van Baren <[email protected]>
177Date: Mon Jun 25 20:55:58 2007 -0400
178
179 Tighten up the error messages.
180
181 Signed-off-by: Gerald Van Baren <[email protected]>
182
183commit c45874b05aae897a6c29d1a97d4bb708fca2756c
184Author: Gerald Van Baren <[email protected]>
185Date: Mon Jun 25 19:52:23 2007 -0400
186
187 Asthetic improvements: error messages and line lengths.
188
189 Tighten up the error messages, split overlength lines.
190
191 Signed-off-by: Gerald Van Baren <[email protected]>
192
193commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1
194Author: Gerald Van Baren <[email protected]>
195Date: Fri May 25 22:08:57 2007 -0400
196
197 Fix fdt_chosen() to call ft_board_setup(), clean up long lines.
198
199 The fdt_chosen() function was adding/seting some properties ad-hoc
200 improperly and duplicated (poorly) what was done in ft_board_setup()
201
202 Clean up long lines (setting properties, printing errors).
203
204 Signed-off-by: Gerald Van Baren <[email protected]>
205
206commit 06e19a07701c968f15d72c083b5872a1a11c7b01
207Author: Gerald Van Baren <[email protected]>
208Date: Mon May 21 23:27:16 2007 -0400
209
210 For fdt_find_node_by_path(), handle the root path properly.
211
212 Also removes the special case root path detection in cmd_fdt.c since it
213 is no longer necessary.
214
215 Signed-off-by: Gerald Van Baren <[email protected]>
216
217commit 9675ee7208ab965d13ea8d8262d77ac4160ef549
218Author: Gerald Van Baren <[email protected]>
219Date: Thu May 17 23:54:36 2007 -0400
220
221 Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT
222
223 Signed-off-by: Wolfgang Grandegger <[email protected]>
224 Acked-by: Gerald Van Baren <[email protected]>
225
226commit 1a861169bc3758f9de3aead62b058736c6891246
227Author: Gerald Van Baren <[email protected]>
228Date: Wed Jun 6 22:47:58 2007 -0400
229
230 Replace fdt_node_offset() with fdt_find_node_by_path().
231
232 The new name matches more closely the kernel's name, which is also
233 a much better description.
234
235 Signed-off-by: Wolfgang Grandegger <[email protected]>
236 Acked-by: Gerald Van Baren <[email protected]>
237
238commit addd8ce83078c25f0eca5f23adbdfc64ca50a243
239Author: Gerald Van Baren <[email protected]>
240Date: Wed May 16 22:39:59 2007 -0400
241
242 Fix cmd_fdt line lengths, refactor code.
243
244 Break lines that were greater than 80 characters in length.
245 Move the fdt print and property parsing code to separate static functions
246 to reduce coding clutter in the fdt_cmd handling body.
247
248 Signed-off-by: Gerald Van Baren <[email protected]>
249
250commit 25114033ab21788810c48ba4df103b649da1223b
251Author: Gerald Van Baren <[email protected]>
252Date: Sat May 12 09:47:25 2007 -0400
253
254 FDT command improvements.
255
256 Fix "fdt set" so that it will create a non-existing property.
257 Add "fdt mknode" to create nodes.
258
259 Signed-off-by: Gerald Van Baren <[email protected]>
260
261commit 38eb508e8e811e2e57628f445de3a24a23c7d804
262Author: Gerald Van Baren <[email protected]>
263Date: Sat May 12 09:45:46 2007 -0400
264
265 Reorganize and fix problems (returns) in the bootm command.
266
267 Do *NOT* return after the "point of no return" has been passed.
268 If something goes wrong, the board must be reset after that point.
269 Move the "Transferring control to Linux" debug message back to where it
270 belongs: just before transferring control to linux.
271
272 Signed-off-by: Gerald Van Baren <[email protected]>
273
274commit 89c8757d8f213c47709bdc4efe0695263a6080a6
275Author: Gerald Van Baren <[email protected]>
276Date: Tue May 8 21:27:35 2007 -0400
277
278 Fix bugs in the CONFIG_OF_LIBFDT
279
280 Stupid coding mistakes (identified by Timur Tabi, thanks).
281
282 Signed-off-by: Gerald Van Baren <[email protected]>
283
284commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec
285Author: Gerald Van Baren <[email protected]>
286Date: Wed Apr 25 22:47:15 2007 -0400
287
288 Improve fdt move length handling.
289
290 Make the length parameter optional: if not specified, do the move using
291 the current size unchanged.
292
293 Signed-off-by: Gerald Van Baren <[email protected]>
294
295commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d
296Author: Gerald Van Baren <[email protected]>
297Date: Wed Apr 25 22:23:36 2007 -0400
298
299 Minor code clean up.
300
301 Declare the variable fdt properly as extern.
302 Call the "set_fn" function pointer the "short way" without the full
303 dereferencing syntax.
304
305 Signed-off-by: Gerald Van Baren <[email protected]>
306
307commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6
308Author: Gerald Van Baren <[email protected]>
309Date: Wed Apr 25 21:24:27 2007 -0400
310
311 Improve error messages, more informative.
312
313 Print more than the raw libfdt error message strings. This is especially
314 useful for cluing in the user when the bootm command aborts due to
315 blob problems.
316
317 Signed-off-by: Gerald Van Baren <[email protected]>
318
319commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4
320Author: Gerald Van Baren <[email protected]>
321Date: Fri Apr 20 22:46:53 2007 -0400
322
323 libfdt: Conditionally compile based on CONFIG_OF_LIBFDT
324
325 This is the way u-boot reduces configured-out code. At Wolfgang
326 Grandegger and Wolfgang Denk's request, make libfdt conform.
327
328 Signed-off-by: Gerald Van Baren <[email protected]>
329
330commit 923efd286411ed052d9e074f59f8986d6081061c
331Author: Bruce Adler <[email protected]>
332Date: Fri Aug 10 14:54:47 2007 -0700
333
334 add image size and descriptors for Spartan 3E FPGA chips
335
336 Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1)
337
338 Signed-off by: Bruce Adler <[email protected]>
339
340commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70
341Author: Kim Phillips <[email protected]>
342Date: Fri Aug 10 15:34:48 2007 -0500
343
344 make MAKEALL more immune to merge conflicts
345
346 ..by placing board entries one per line, as suggested by jdl.
347
348 Signed-off-by: Kim Phillips <[email protected]>
349
350commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f
351Author: Kim Phillips <[email protected]>
352Date: Fri Aug 10 13:28:25 2007 -0500
353
354 README: Remove outdated cpu type, board type, and NAME_config lists
355
356 Signed-off-by: Kim Phillips <[email protected]>
357
358commit 49bb59912d21aacb507eb81fd21fb7af650c706c
359Author: Dave Liu <[email protected]>
360Date: Fri Aug 10 15:48:59 2007 +0800
361
362 mpc83xx: Suppress the warning 'burstlen'
363
364 suppress the warning 'burstlen' of spd_sdram.
365
366 Signed-off-by: Dave Liu <[email protected]>
367
368commit c2c0ab4aff86622b837a48a0e560351f9afafb95
369Author: Stefan Roese <[email protected]>
370Date: Fri Aug 10 20:34:58 2007 +0200
371
372 Conding style cleanup
373
374 Signed-off-by: Stefan Roese <[email protected]>
375
376commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e
377Author: Sergey Kubushyn <[email protected]>
378Date: Fri Aug 10 20:26:18 2007 +0200
379
380 [ARM] TI DaVinci support, hopefully final
381
382 Add support for the following DaVinci boards:
383 - DV_EVM
384 - SCHMOOGIE
385 - SONATA
386
387 Changes:
388
389 - Split into separate board directories
390 - Removed changes to MTD_DEBUG (or whatever it's called)
391 - New CONFIG_CMD party line followed
392 - Some cosmetic fixes, cleanup etc.
393 - Patches against the latest U-Boot tree as of now.
394 - Fixed CONFIG_CMD_NET in net files.
395 - Fixed CONFIG_CMD_EEPROM for schmoogie.
396 - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
397 DV_EVM. Can't check if it works on SONATA, don't have a board any more,
398 but it at least compiles.
399
400 Here is an excerpt from session log on SCHMOOGIE...
401
402 U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17)
403
404 DRAM: 128 MB
405 NAND: 128 MiB
406 In: serial
407 Out: serial
408 Err: serial
409 ARM Clock : 297MHz
410 DDR Clock : 162MHz
411 ETH PHY : DP83848 @ 0x01
412 U-Boot > iprobe
413 Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
414 U-Boot > ping 192.168.253.10
415 host 192.168.253.10 is alive
416 U-Boot >
417
418 Signed-off-by: Sergey Kubushyn <[email protected]>
419 Acked-by: Dirk Behme <[email protected]>
420 Acked-by: Zach Sadecki <[email protected]>
421 Acked-by: Stefan Roese <[email protected]>
422
423commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
424Author: Dirk Behme <[email protected]>
425Date: Thu Aug 2 17:42:08 2007 +0200
426
427 Make use of generic 64bit division in nand_util.c
428
429 Use generic 64bit division in nand_util.c. This makes nand_util.c
430 independent of any toolchain 64bit division.
431
432 Signed-off-by: Dirk Behme <[email protected]>
433
434commit f7c086e94e8ce9aad7268af97f73aa6884686f27
435Author: Dirk Behme <[email protected]>
436Date: Thu Aug 2 17:41:14 2007 +0200
437
438 Move 64bit division from avr32 to generic lib
439
440 Move the 64bit division from lib_avr32 to lib_generic. With this, all
441 boards can do_div/__div64_32 if needed, not only avr one. Code is put
442 to lib_generic, so no larger memory footprint if not used. No code
443 modifications. Thanks for proposal by Håvard Skinnemoen.
444
445 Signed-off-by: Dirk Behme <[email protected]>
446
447commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
448Author: Kim Phillips <[email protected]>
449Date: Mon Aug 6 18:18:34 2007 -0500
450
451 mpc83xx: fix ITX[GP] O=builddir builds
452
453 make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop.
454
455 Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or
456 "BUILD_DIR=<some dir> ./MAKEALL ..."
457
458 Signed-off-by: Kim Phillips <[email protected]>
459
460commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3
461Author: Dave Liu <[email protected]>
462Date: Wed Aug 1 15:00:59 2007 +0800
463
464 mpc83xx: Correct the README for DDR ECC
465
466 Update the README for DDR ECC, change the name
467 to README.mpc83xx.ddrecc.
468
469 Signed-off-by: Dave Liu <[email protected]>
470 Signed-off-by: Kim Phillips <[email protected]>
471
472commit daab8c67d2defef73dc26ab07f0c3afd1b05d019
473Author: Dave Liu <[email protected]>
474Date: Wed Aug 1 15:00:15 2007 +0800
475
476 mpc83xx: Consolidate the ECC support of 83xx
477
478 Remove the duplicated source code of ecc command on the <board>.c,
479 for reused, move these code to cpu/mpc83xx directory.
480
481 Signed-off-by: Dave Liu <[email protected]>
482 Signed-off-by: Kim Phillips <[email protected]>
483
484commit 036575c544cf1b69654d8fb334bda69c6ff3da36
485Author: Dave Liu <[email protected]>
486Date: Sat Aug 4 13:37:39 2007 +0800
487
488 mpc83xx: Correct the burst length for DDR2 with 32 bits
489
490 The burst length should be 4 for DDR2 with 32 bits bus
491
492 Signed-off-by: Dave Liu <[email protected]>
493
494commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed
495Author: Kim Phillips <[email protected]>
496Date: Wed Jul 25 19:25:33 2007 -0500
497
498 mpc83xx: add support for the MPC8323E RDB
499
500 MPC8323E based board with 64MB fixed SDRAM, 16MB flash,
501 five 10/100 ethernet ports connected via an ICPlus IP175C
502 switch, one PCI slot, and serial. Features not supported
503 in this patch are SD card interface, 2 USB ports, and the
504 two phone ports.
505
506 Signed-off-by: Michael Barkowski <[email protected]>
507 Signed-off-by: Kim Phillips <[email protected]>
508
509commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359
510Author: Kim Phillips <[email protected]>
511Date: Wed Jul 25 19:25:28 2007 -0500
512
513 mpc83xx: fixup generic pci for libfdt
514
515 add libfdt support to the generic 83xx pci code
516
517 Signed-off-by: Kim Phillips <[email protected]>
518
519commit f57ac7a7b37109245b69db80839ebee26179966a
520Author: Kim Phillips <[email protected]>
521Date: Wed Jul 25 19:25:22 2007 -0500
522
523 mpc83xx: fix 8360 and cpu functions to update fdt being passed
524
525 ..and not the global fdt. Rename local fdt vars to blob so as not to
526 be confused with the global var with the same three-letter name.
527
528 Signed-off-by: Kim Phillips <[email protected]>
529
530commit 8be404459a6b7395415a57bb35e8377e3b2b5acb
531Author: Jerry Van Baren <[email protected]>
532Date: Wed Jul 4 21:34:24 2007 -0400
533
534 mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled
535
536 Several node strings were not correct (trailing slashes and properties
537 in the strings)
538 Added setting of the timebase-frequency.
539 Improved error messages and use debug() instead of printf().
540
541 Signed-off-by: Gerald Van Baren <[email protected]>
542 Signed-off-by: Kim Phillips <[email protected]>
543
544commit 26d02c9bbac1751c5e19294f000100b48d43a920
545Author: Jerry Van Baren <[email protected]>
546Date: Wed Jul 4 21:27:30 2007 -0400
547
548 mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().
549
550 The new name matches more closely the kernel's name, which is also
551 a much better description.
552
553 These are the mpc83xx changes made necessary by the function name change.
554
555 Signed-off-by: Wolfgang Grandegger <[email protected]>
556 Acked-by: Gerald Van Baren <[email protected]>
557 Signed-off-by: Kim Phillips <[email protected]>
558
559commit 9be39a67c9f8fef7107f5df09d673005f04d0963
560Author: Dave Liu <[email protected]>
561Date: Mon Jun 25 10:41:56 2007 +0800
562
563 mpc83xx: Add support for the display of reset status
564
565 83xx processor family has many reset sources, such as
566 power on reset, software hard reset, software soft reset,
567 JTAG, bus monitor, software watchdog, check stop reset,
568 external hard reset, external software reset.
569 sometimes, to figure out the fault of system, we need to
570 know the cause of reset early before the prompt of
571 u-boot present.
572
573 Signed-off-by: Dave Liu <[email protected]>
574 Signed-off-by: Kim Phillips <[email protected]>
575
576commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d
577Author: Dave Liu <[email protected]>
578Date: Mon Jun 25 10:41:04 2007 +0800
579
580 mpc83xx: Fix the align bug of SDMA buffer
581
582 According to the latest user manual, the SDMA temporary
583 buffer base address must be 4KB aligned.
584
585 Signed-off-by: Dave Liu <[email protected]>
586 Signed-off-by: Kim Phillips <[email protected]>
587
588commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476
589Author: Dave Liu <[email protected]>
590Date: Mon Jun 25 13:21:12 2007 +0800
591
592 mpc83xx: Revise the MPC8360EMDS readme doc
593
594 When the rev2.x silicon mount on the MPC8360EMDS baord,
595 and if you are using the u-boot version after the commit
596 3fc0bd159103b536e1c54c6f4457a09b3aba66ca.
597 to make the ethernet interface usable, we have to setup
598 the jumpers correctly.
599
600 Signed-off-by: Dave Liu <[email protected]>
601 Signed-off-by: Kim Phillips <[email protected]>
602
603commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c
604Author: Timur Tabi <[email protected]>
605Date: Tue Jul 3 13:46:32 2007 -0500
606
607 FSL I2C driver programs the two I2C busses differently
608
609 The i2c_init() function in fsl_i2c.c programs the two I2C busses differently.
610 The second I2C bus has its slave address programmed incorrectly and is
611 missing a 5-us delay.
612
613 Signed-off-by: Timur Tabi <[email protected]>
614 Signed-off-by: Kim Phillips <[email protected]>
615
616commit df33f6b4d6d63693dd9200808b242de1b86cb8e8
617Author: Timur Tabi <[email protected]>
618Date: Tue Jul 3 13:04:34 2007 -0500
619
620 Update SCCR programming in cpu_init_f() to support all 83xx processors
621
622 Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
623 bitfields for all 83xx processors. The code to update some bitfields was
624 compiled only on some processors. Now, the bitfields are programmed as long
625 as the corresponding CFG_SCCR option is defined in the board header file.
626 This means that the board header file should not define any CFG_SCCR macros
627 for bitfields that don't exist on that processor, otherwise the SCCR will be
628 programmed incorrectly.
629
630 Signed-off-by: Timur Tabi <[email protected]>
631 Signed-off-by: Kim Phillips <[email protected]>
632
633commit 9546266999f0b9b51372636614211b88d90f0f25
634Author: Martin Krause <[email protected]>
635Date: Fri Jun 22 13:04:22 2007 +0200
636
637 TQM834x: cleanup configuraton
638
639 Remove irritating #undef DEBUG
640
641 Signed-off-by: Martin Krause <[email protected]>
642 Signed-off-by: Kim Phillips <[email protected]>
643
644commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc
645Author: david.saada <[email protected]>
646Date: Mon Jun 18 09:09:53 2007 -0700
647
648 MPC83xx: Fix makefile to generate config.h file in the build directory
649
650 MPC83xx: Fix the Makefile config sections to generate the include/config.h
651 file in the build directory instead of the source directory.
652
653 Signed-off-by: David Saada <[email protected]>
654 Signed-off-by: Kim Phillips <[email protected]>
655
656commit 1ded0242e437259366792d52b7e9d1e1931d8fa5
657Author: Lee Nipper <[email protected]>
658Date: Thu Jun 14 20:07:33 2007 -0500
659
660 mpc83xx: Add support for 8360 silicon revision 2.1
661
662 This change adds 8360 silicon revision 2.1 support to u-boot.
663
664 Signed-off-by: Lee Nipper <[email protected]>
665 Signed-off-by: Kim Phillips <[email protected]>
666
667commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4
668Author: Kumar Gala <[email protected]>
669Date: Wed Aug 8 04:14:28 2007 -0500
670
671 Treat ppc64 host as ppc
672
673 Signed-off-by: Kumar Gala <[email protected]>
674
675commit 0dc4279b08ff82472bec2e2c90858602459febe8
676Author: Jason Jin <[email protected]>
677Date: Wed Aug 8 09:01:46 2007 +0800
678
679 Minor fix for bios emulator makefile
680
681 Add $(obj) to LIB avoiding objects be built in the source dir
682
683 Signed-off-by: Jason Jin <[email protected]>
684
685commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6
686Author: Jason Jin <[email protected]>
687Date: Wed Aug 8 08:33:11 2007 +0800
688
689 Add CONFIG_BIOSEMU define to guard all the bios emulator code
690
691 Signed-off-by: Jason Jin <[email protected]>
692
693 This patch fix the compile issue on the board that did not enable the bios emulator
694
695commit ed8106433522f2ea8933e9808346860d061d7731
696Author: Zach Sadecki <[email protected]>
697Date: Tue Jul 31 12:27:25 2007 -0500
698
699 tsec: fix multiple PHY support
700
701 The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx"
702 broke multiple PHY support in tsec.c. This fixes it.
703
704 Signed-off-by: Zach Sadecki <[email protected]>
705 Signed-off-by: Kim Phillips <[email protected]>
706
707commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede
708Author: Joe Hamman <[email protected]>
709Date: Thu Aug 9 09:08:18 2007 -0500
710
711 tsec: Allow Ten Bit Interface address to be configurable
712
713 Allow the address of the Ten Bit Interface (TBI) to be changed in the
714 event of a conflict with another device.
715
716 Signed-off by: Joe Hamman <[email protected]>
717
718commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c
719Author: Jason Jin <[email protected]>
720Date: Tue Aug 7 16:17:06 2007 +0800
721
722 Add CONFIG_BIOSEMU define to guard all the bios emulator code
723
724 This patch fix the compile issue on the board that did not enable the bios emulator
725
726commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053
727Author: Wolfgang Denk <[email protected]>
728Date: Tue Aug 7 16:02:13 2007 +0200
729
730 Fix missing brace error in fs/fat/fat.c
731 [pointed out by Roderik Wildenburg]
732
733 Signed-off-by: Wolfgang Denk <[email protected]>
734
735commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
736Author: Wolfgang Denk <[email protected]>
737Date: Mon Aug 6 23:21:05 2007 +0200
738
739 Fixed typo in README (pointed out by Martin Jost).
740
741 Signed-off-by: Wolfgang Denk <[email protected]>
742
743commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
744Author: Wolfgang Denk <[email protected]>
745Date: Mon Aug 6 02:17:36 2007 +0200
746
747 Coding style cleanup. Update CHANGELOG.
748
749 Signed-off-by: Wolfgang Denk <[email protected]>
750
751commit 221838cc7eb178370ff62aa05920a582e12ac322
752Author: Jason Jin <[email protected]>
753Date: Tue Jul 10 09:03:22 2007 +0800
754
755 Remove the bios emulator from MAI board.
756
757 The bios emulator in the MAI board can not pass compile
758 and have a lot of crap in it. remove it and will have a
759 clean and small bios emulator in the drivers directory
760 which can be uesed for every board.
761
762 Signed-off-by: Jason Jin <[email protected]>
763
764commit 5618332409bb96f4448d1712899369fc80c0b489
765Author: Jason Jin <[email protected]>
766Date: Fri Jul 13 12:14:59 2007 +0800
767
768 Fix some compile issues for MAI board.
769
770 Signed-off-by: Jason Jin <[email protected]>
771
772commit 0f460a1ee148b648ee242c3157650287d4296260
773Author: Jason Jin <[email protected]>
774Date: Fri Jul 13 12:14:58 2007 +0800
775
776 Configurations for ATI video card BIOS emulator
777
778 This patch add definition of the BIOS emulator and the ATI framebuffer
779 driver for MPC8641HPCN board.
780
781 Signed-off-by: Jason Jin <[email protected]>
782 Signed-off-by: Zhang Wei <[email protected]>
783
784commit ece92f85053b8df613edcf05b26a416cbc3d629c
785Author: Jason Jin <[email protected]>
786Date: Fri Jul 6 08:34:56 2007 +0800
787
788 This is a BIOS emulator, porting from SciTech for u-boot, mainly for
789 ATI video card BIOS. and can be used for x86 code emulation by some
790 modifications.
791
792 Signed-off-by: Jason Jin <[email protected]>
793
794commit 5072188acabde3178fac7f5a597150e6e74fd40c
795Author: Jason Jin <[email protected]>
796Date: Fri Jul 6 08:33:33 2007 +0800
797
798 This is a framebuffer driver for ATI video card, can work for PCI9200,
799 X300, X700, X800 ATI video cards.
800
801 Signed-off-by: Zhang Wei <[email protected]>
802 Signed-off-by: Jason Jin <[email protected]>
803
9c7e4b06
WD		 804commit 5728be389e65fd47f34b33c2596271eb4db751ae
805Author: Wolfgang Denk <[email protected]>
806Date: Mon Aug 6 01:01:49 2007 +0200
807
808 Coding style cleanup. Update CHANGELOG.
809
810 Signed-off-by: Wolfgang Denk <[email protected]>
811
5728be38
WD		 812commit 8092fef4c29b395958bb649647da7e3775731517
813Author: Martin Krause <[email protected]>
814Date: Tue Dec 12 14:26:01 2006 +0100
815
816 Add functions to list of exported functions
817
818 Additionally export the following fuctions (to make trab_config build again):
819 - simple_strtol()
820 - strcmp()
821
822 Also bump the ABI version to reflect this change
823
824 Signed-off-by: Martin Krause <[email protected]>
825
826commit 63cec5814fab5d2b1c86982327433807a5ac0249
827Author: Ed Swarthout <[email protected]>
828Date: Thu Aug 2 14:09:49 2007 -0500
829
830 Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
831
832 All of the PCI/PCI-Express driver and initialization code that
833 was in the MPC8641HPCN port has now been moved into the common
834 drivers/fsl_pci_init.c. In a subsequent patch, this will be
835 utilized by the 85xx ports as well.
836
837 Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
838
839 Also enable the second PCI-Express controller on 8641
840 by getting its BATS and CFG_ setup right.
841
842 Fixed a u16 vendor compiler warning in AHCI driver too.
843
844 Signed-off-by: Ed Swarthout <[email protected]>
845 Signed-off-by: Zhang Wei <[email protected]>
846 Signed-off-by: Jon Loeliger <[email protected]>
847
9986bc3e
WD		 848commit 86b116b1b1e165ca4840daefed36d2e3b8460173
849Author: Bartlomiej Sieka <[email protected]>
850Date: Fri Aug 3 12:08:16 2007 +0200
851
852 cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
853
854 Add the ability for modules from the Schindler cm5200 family to use a
855 single U-Boot image:
856 - rename cm1_qp1 to cm5200
857 - add run-time module detection
858 - parametrize SDRAM configuration according to the module we are running on
859
860 Few minor, board-specific fixes included in this patch:
861 - better MAC address handling
862 - updated default environment ('update' command uses +{filesize} now)
863 - improved error messages in the auto-update code
864 - allow booting U-Boot from RAM (CFG_RAMBOOT)
865
866 Signed-off-by: Grzegorz Bernacki <[email protected]>
867 Signed-off-by: Piotr Kruszynski <[email protected]>
868 Signed-off-by: Bartlomiej Sieka <[email protected]>
869
5728be38
WD		 870commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779
871Author: Andy Fleming <[email protected]>
872Date: Fri Aug 3 04:05:25 2007 -0500
873
874 Add Marvell 1149 PHY support to the TSEC
875
f2c2a937 876commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86
5728be38 877Author: Wolfgang Denk <[email protected]>
f2c2a937 878Date: Thu Aug 2 21:27:46 2007 +0200
5728be38 879
f2c2a937 880 Coding style cleanup, update CHANGELOG
5728be38
WD		 881
882 Signed-off-by: Wolfgang Denk <[email protected]>
883
5728be38
WD		 884commit 63e22764d2f8653f68888c667eb65b3996b52680
885Author: Wolfgang Denk <[email protected]>
886Date: Thu Aug 2 10:11:18 2007 +0200
887
888 Minor cleanup of <board>_nand build rules.
889
890commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
891Author: Wolfgang Denk <[email protected]>
892Date: Thu Aug 2 00:48:45 2007 +0200
893
894 Fix build errors and warnings / code cleanup.
895
896 Signed-off-by: Wolfgang Denk <[email protected]>
897
b1b54e35
WD		 898commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
899Author: Rafal Jaworowski <[email protected]>
900Date: Fri Jul 27 14:43:59 2007 +0200
901
902 [ADS5121] Support for the ADS5121 board
903
904 The following MPC5121e subsystems are supported:
905
906 - low-level CPU init
907 - NOR Boot Flash (common CFI driver)
908 - DDR SDRAM
909 - FEC
910 - I2C
911 - Watchdog
912
913 Signed-off-by: Grzegorz Bernacki <[email protected]>
914 Signed-off-by: Rafal Jaworowski <[email protected]>
915 Signed-off-by: Jan Wrobel <[email protected]>
916
917commit 1863cfb7b100ba0ee3401799457a01dc058745f8
918Author: Rafal Jaworowski <[email protected]>
919Date: Fri Jul 27 14:22:04 2007 +0200
920
921 [PPC] Remove unused MSR_USER definition
922
923 Signed-off-by: Rafal Jaworowski <[email protected]>
924
925commit cc3023b9f95d7ac959a764471a65001062aecf41
926Author: Rafal Jaworowski <[email protected]>
927Date: Thu Jul 19 17:12:28 2007 +0200
928
929 Fix breakage of 8xx boards from recent commit.
930
931 This patch fixes the negative consequences for 8xx of the recent
932 "ppc4xx: Clean up 440 exceptions handling" commit.
933
934 Signed-off-by: Rafal Jaworowski <[email protected]>
935
936commit 3a6cab844cf74f76639d795e0be8717e02c86af7
937Author: Wolfgang Denk <[email protected]>
938Date: Sat Jul 14 22:51:02 2007 +0200
939
940 Update CHANGELOG
941
942 Signed-off-by: Wolfgang Denk <[email protected]>
943
3a6cab84
WD		 944commit 011595307731a7a67a7445d107c279d031e8ab97
945Author: Heiko Schocher <[email protected]>
946Date: Sat Jul 14 01:06:58 2007 +0200
947
948 [PCS440EP] - fix compile error, if BUILD_DIR is used
949
950commit fad63407154f46246ce80d53a9c669a44362ac67
951Author: Heiko Schocher <[email protected]>
952Date: Fri Jul 13 09:54:17 2007 +0200
953
954 make show_boot_progress () weak.
955
956 Signed-off-by: Heiko Schocher <[email protected]>
957
958commit 907902472391b6ca1876ec300687562ecaf459b1
959Author: Heiko Schocher <[email protected]>
960Date: Fri Jul 13 08:26:05 2007 +0200
961
962 [PCS440EP] - The DIAG LEDs are now blinking, if an error occur
963 - fix compile error, if BUILD_DIR is used
964
965 Signed-off-by: Heiko Schocher <[email protected]>
966
967commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
968Author: Wolfgang Denk <[email protected]>
969Date: Thu Jul 12 01:45:34 2007 +0200
970
971 Update CHANGELOG, minor coding style cleanup.
972
973 Signed-off-by: Wolfgang Denk <[email protected]>
974
5728be38
WD		 975commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654
976Author: Andy Fleming <[email protected]>
977Date: Fri Jun 8 16:41:18 2007 -0500
978
979 Remove erroneous errata code from Marvel 88E1111S driver
980
981 The Marvel 88E1111S driver for the TSEC was copied from the
982 88E1101 driver, and included a fix for an erratum which does not
ec06b273 983 exist on that part. Now it is removed
5728be38
WD		 984
985 Signed-off-by: Andy Fleming <[email protected]>
986
987commit 982efcf23fd03647e01e2fbe28a7a36239156cc0
988Author: Andy Fleming <[email protected]>
989Date: Tue Jun 5 16:38:44 2007 -0500
990
991 From: eran liberty <[email protected]>
992
993 adds the reset register to 85xx immap
994
995 Signed-off-by: Eran Liberty <[email protected]>
996 Signed-off-by: Andy Fleming <[email protected]>
997
998commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7
999Author: Andy Fleming <[email protected]>
1000Date: Thu May 10 17:50:01 2007 -0500
1001
1002 Polished the 85xx ADS config files
1003
1004 Made the boot commands use device trees by default.
1005 Also moved the ramdisk to 1000000 (I think the previous address
1006 was getting overridden during boot).
1007
1008 Signed-off-by: Andy Fleming <[email protected]>
1009
1010commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038
1011Author: Ed Swarthout <[email protected]>
1012Date: Wed May 9 11:03:32 2007 -0500
1013
1014 8544ds: Fix Makefile after moving pixis to board/freescale.
1015
1016 The OBJTREE != SRCTREE build scenario was broken.
1017 This fixes it.
1018
1019 Signed-off-by: Ed Swarthout <[email protected]>
1020 Signed-off-by: Jon Loeliger <[email protected]>
1021
1022commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e
1023Author: Andy Fleming <[email protected]>
1024Date: Wed May 9 00:54:20 2007 -0500
1025
1026 tsec: Fix PHY code to match first driver
1027
1028 Jarrold Wen noticed that the generic PHY code always matches
1029 under the current implementation. Change it so the first match
1030 wins, and *only* unknown PHYs trigger the generic driver
1031
1032 Signed-off-by: Andy Fleming <[email protected]>
1033
1034commit ccc091aac61a38cd998d575d92f7232e256d6312
1035Author: Andy Fleming <[email protected]>
1036Date: Tue May 8 17:27:43 2007 -0500
1037
1038 Add support for CPM device tree configuration to 8560 ADS
1039
1040 * Adds code to modify CPM frequencies
1041 * Cleans up the config file to #define TSEC and (for now) #undef FCC
1042 * Adds the MII command for all 8560 ADS configurations
1043 * Updates config file to provide convenience commands for booting
1044 with a device tree
1045
1046 Signed-off-by: Vitaly Bordug <[email protected]>
1047 Signed-off-by: Andy Fleming <[email protected]>
1048
1049commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9
1050Author: Andy Fleming <[email protected]>
1051Date: Tue May 8 17:23:02 2007 -0500
1052
1053 Fix Marvell 88e1145 PHY init code
1054
1055 Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver
1056 where the reset was being done after the errata code instead of
1057 before.
1058
1059 Signed-off-by: Haiying Wang <[email protected]>
1060 Signed-off-by: Andy Fleming <[email protected]>
1061
1062commit 5dc210dec5bace98a50b6ba905347890091a9bb0
1063Author: Ed Swarthout <[email protected]>
1064Date: Wed Jul 11 14:52:16 2007 -0500
1065
1066 Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC.
1067
1068 Signed-off-by: Ed Swarthout <[email protected]>
1069
1070commit e8b85f3ba4cd8930e0a2fea2100c815d64201765
1071Author: Ed Swarthout <[email protected]>
1072Date: Wed Jul 11 14:52:08 2007 -0500
1073
1074 pciauto setup bridge
1075
1076 The P2P bridge bus numbers programmed into the device are relative to
1077 hose->first_busno.
1078
1079 Signed-off-by: Ed Swarthout <[email protected]>
1080
1081commit 571f49fa717004ca4268b4e24057efc7bf9f987b
1082Author: Ed Swarthout <[email protected]>
1083Date: Wed Jul 11 14:52:01 2007 -0500
1084
1085 Support PCIe extended config registers
1086
1087 FSL PCIe block has extended cfg registers in the 100 and 400 range.
1088 For example, to read the LTSSM register: pci display <busn>.0 404 1
1089
1090 Signed-off-by: Ed Swarthout <[email protected]>
1091
1092commit ba5feb12581bb2912ce301e4866b71f846e9fc07
1093Author: Ed Swarthout <[email protected]>
1094Date: Wed Jul 11 14:51:48 2007 -0500
1095
1096 Minor improvements to drivers/pci_auto.c
1097
1098 - Make pciauto_{pre,post}scan_setup_bridge non-static
1099 - Added physical address display in debug messages.
1100
1101 Signed-off-by: Ed Swarthout <[email protected]>
1102
1103commit 40e81addab7bb74d20ddf681ce9babc880a828ee
1104Author: Ed Swarthout <[email protected]>
1105Date: Wed Jul 11 14:51:35 2007 -0500
1106
1107 Start pci hose scan from hose->current_busno.
1108
1109 Ensure hose->current_busno is not less than first_busno. This fixes
1110 broken board code which leaves current_busno=0 when first_busno is
1111 greater than 0 for the cases with multiple controllers.
1112
1113 Signed-off-by: Ed Swarthout <[email protected]>
1114
1115commit 3865b1fb7843a08ad49a6319a36415752276ff48
1116Author: Stefan Roese <[email protected]>
1117Date: Wed Jul 11 12:13:53 2007 +0200
1118
1119 Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup
1120
1121 Signed-off-by: Stefan Roese <[email protected]>
1122
239f05ee
WD		 1123commit fa1df308926a6f70e3504c57514ef27ac31fd13a
1124Author: Bartlomiej Sieka <[email protected]>
1125Date: Wed Jul 11 20:11:07 2007 +0200
1126
1127 CM1.QP1: Support for the Schindler CM1.QP1 board.
1128
1129 Signed-off-by: Piotr Kruszynski <[email protected]>
1130 Signed-off-by: Bartlomiej Sieka <[email protected]>
1131
1132commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
1133Author: Heiko Schocher <[email protected]>
1134Date: Wed Jul 11 18:39:11 2007 +0200
1135
1136 [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
1137 - now the Flash ST M29W040B is supported (not tested)
1138 - fix the "led" command
1139 - fix compile error, if BUILD_DIR is used
1140
1141 Signed-off-by: Heiko Schocher <[email protected]>
1142
5728be38
WD		 1143commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5
1144Author: Stefan Roese <[email protected]>
1145Date: Sun Jul 8 13:44:27 2007 +0200
1146
1147 Fix malloc problem introduced with the relocation fixup for the PPC platform
1148
1149 The relocation fixup didn't handle the malloc pointer initialization
1150 correctly. This patch fixes this problem. Tested successfully on 4xx.
1151 The relocation fixup patches for 4xx will follow soon.
1152
1153 Signed-off-by: Stefan Roese <[email protected]>
1154
1155commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582
1156Author: Jon Loeliger <[email protected]>
1157Date: Tue Jul 10 11:19:50 2007 -0500
1158
1159 disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
1160
1161 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
1162 Those always evaluated TRUE, and thus were always compiled
1163 even when IDE really wasn't defined/wanted.
1164
1165 Signed-off-by: Jon Loeliger <[email protected]>
1166
1167commit ddb5d86f0215bcb6c293510c50eb050e92883b7a
1168Author: Jon Loeliger <[email protected]>
1169Date: Tue Jul 10 11:13:21 2007 -0500
1170
1171 drivers/: Remove lingering references to CFG_CMD_* symbols.
1172
1173 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
1174 Those always evaluated TRUE, and thus were always compiled
1175 even when IDE really wasn't defined/wanted.
1176
1177 Signed-off-by: Jon Loeliger <[email protected]>
1178
1179commit f40a7f3e3888b42a43674b099e5470022c8c544c
1180Author: Jon Loeliger <[email protected]>
1181Date: Tue Jul 10 11:07:56 2007 -0500
1182
1183 fs/: Remove lingering references to CFG_CMD_* symbols.
1184
1185 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
1186 Those always evaluated TRUE, and thus were always compiled
1187 even when IDE really wasn't defined/wanted.
1188
1189 Signed-off-by: Jon Loeliger <[email protected]>
1190
1191commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593
1192Author: Jon Loeliger <[email protected]>
1193Date: Tue Jul 10 11:05:02 2007 -0500
1194
1195 net/: Remove lingering references to CFG_CMD_* symbols.
1196
1197 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
1198 Those always evaluated TRUE, and thus were always compiled
1199 even when IDE really wasn't defined/wanted.
1200
1201 Signed-off-by: Jon Loeliger <[email protected]>
1202
1203commit 902531788376046da212afd1661cffb62f3daa1c
1204Author: Jon Loeliger <[email protected]>
1205Date: Tue Jul 10 11:02:44 2007 -0500
1206
1207 common/: Remove lingering references to CFG_CMD_* symbols.
1208
1209 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
1210 Those always evaluated TRUE, and thus were always compiled
1211 even when IDE really wasn't defined/wanted.
1212
1213 Signed-off-by: Jon Loeliger <[email protected]>
1214
1215commit d39b57415838c73fb0a37eca84de3c68ba990586
1216Author: Jon Loeliger <[email protected]>
1217Date: Tue Jul 10 10:48:22 2007 -0500
1218
1219 board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.
1220
1221 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
1222 Those always evaluated TRUE, and thus were always compiled
1223 even when IDE really wasn't defined/wanted.
1224
1225 Signed-off-by: Jon Loeliger <[email protected]>
1226
1227commit 77a318545d57aefa844752465b94c7e09a3f26d0
1228Author: Jon Loeliger <[email protected]>
1229Date: Tue Jul 10 10:39:10 2007 -0500
1230
1231 board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
1232
1233 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
1234 Those always evaluated TRUE, and thus were always compiled
1235 even when IDE really wasn't defined/wanted.
1236
1237 Signed-off-by: Jon Loeliger <[email protected]>
1238
1239commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d
1240Author: Jon Loeliger <[email protected]>
1241Date: Tue Jul 10 10:27:39 2007 -0500
1242
1243 cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.
1244
1245 Signed-off-by: Jon Loeliger <[email protected]>
1246
1247commit 079a136c3588814784561d6e4856970ee82d6e2a
1248Author: Jon Loeliger <[email protected]>
1249Date: Tue Jul 10 10:12:10 2007 -0500
1250
1251 include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
1252
1253 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
1254 used to be included but CONFIG_BOOTP_MASK was not defined.
1255
1256 Remove lingering references to CFG_CMD_* symbols.
1257
1258 Signed-off-by: Jon Loeliger <[email protected]>
1259
1260commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c
1261Author: Jon Loeliger <[email protected]>
1262Date: Tue Jul 10 09:38:02 2007 -0500
1263
1264 include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
1265
1266 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
1267 used to be included but CONFIG_BOOTP_MASK was not defined.
1268
1269 Remove lingering references to CFG_CMD_* symbols.
1270
1271 Signed-off-by: Jon Loeliger <[email protected]>
1272
1273commit 80ff4f99b84b64edca3fd10da365ec1493be1c95
1274Author: Jon Loeliger <[email protected]>
1275Date: Tue Jul 10 09:29:01 2007 -0500
1276
1277 include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
1278
1279 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
1280 used to be included but CONFIG_BOOTP_MASK was not defined.
1281
1282 Remove lingering references to CFG_CMD_* symbols.
1283
1284 Signed-off-by: Jon Loeliger <[email protected]>
1285
1286commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a
1287Author: Jon Loeliger <[email protected]>
1288Date: Tue Jul 10 09:22:23 2007 -0500
1289
1290 include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.
1291
1292 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
1293 used to be included but CONFIG_BOOTP_MASK was not defined.
1294
1295 Remove lingering references to CFG_CMD_* symbols.
1296
1297 Signed-off-by: Jon Loeliger <[email protected]>
1298
1299commit 659e2f6736232a08acca8785c206e2b4d9cd07d7
1300Author: Jon Loeliger <[email protected]>
1301Date: Tue Jul 10 09:10:49 2007 -0500
1302
1303 include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
1304
1305 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
1306 used to be included but CONFIG_BOOTP_MASK was not defined.
1307
1308 Remove lingering references to CFG_CMD_* symbols.
1309
1310 Signed-off-by: Jon Loeliger <[email protected]>
1311
1312commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b
1313Author: Jon Loeliger <[email protected]>
1314Date: Tue Jul 10 09:02:57 2007 -0500
1315
1316 include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*.
1317
1318 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
1319 used to be included but CONFIG_BOOTP_MASK was not defined.
1320
1321 Remove lingering references to CFG_CMD_* symbols.
1322
1323 Signed-off-by: Jon Loeliger <[email protected]>
1324
1325commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3
1326Author: Jon Loeliger <[email protected]>
1327Date: Mon Jul 9 22:08:34 2007 -0500
1328
1329 Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!
1330
1331 All of the choices for CONFIG_BOOTP_ are now documented in
1332 the README file. You must now individually select exactly
1333 the set that you want using a series of
1334 #define CONFIG_BOOTP_<x>
1335 statements in the board port config files now.
1336
1337 Signed-off-by: Jon Loeliger <[email protected]>
1338
1339commit d3b8c1a743dcd31625c99e6a44590f207eb00028
1340Author: Jon Loeliger <[email protected]>
1341Date: Mon Jul 9 21:57:31 2007 -0500
1342
1343 include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
1344
1345 Signed-off-by: Jon Loeliger <[email protected]>
1346
1347commit 2fd90ce575b02d189cbf443c85309bcd001aa393
1348Author: Jon Loeliger <[email protected]>
1349Date: Mon Jul 9 21:48:26 2007 -0500
1350
1351 include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
1352
1353 Signed-off-by: Jon Loeliger <[email protected]>
1354
1355commit 37d4bb70586659dedef1658ce1bed071be098aec
1356Author: Jon Loeliger <[email protected]>
1357Date: Mon Jul 9 21:38:02 2007 -0500
1358
1359 include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
1360
1361 Signed-off-by: Jon Loeliger <[email protected]>
1362
1363commit 18225e8dd1950bd6dbf35011e436db7f474c187d
1364Author: Jon Loeliger <[email protected]>
1365Date: Mon Jul 9 21:31:24 2007 -0500
1366
1367 include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
1368
1369 Signed-off-by: Jon Loeliger <[email protected]>
1370
1371commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d
1372Author: Jon Loeliger <[email protected]>
1373Date: Mon Jul 9 21:24:19 2007 -0500
1374
1375 include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
1376
1377 Signed-off-by: Jon Loeliger <[email protected]>
1378
1379commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f
1380Author: Jon Loeliger <[email protected]>
1381Date: Mon Jul 9 21:16:53 2007 -0500
1382
1383 include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
1384
1385 Signed-off-by: Jon Loeliger <[email protected]>
1386
1387commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3
1388Author: Jon Loeliger <[email protected]>
1389Date: Mon Jul 9 19:12:30 2007 -0500
1390
1391 Retire CONFIG_COMMANDS finally.
1392 Strip old CFG_CMD_* symbols out.
1393
1394 Signed-off-by: Jon Loeliger <[email protected]>
1395
1396commit b5501f7d720fed99ab0b42c83f5dea52868ce007
1397Author: Jon Loeliger <[email protected]>
1398Date: Mon Jul 9 19:10:03 2007 -0500
1399
1400 Update README.* to reference new CONFIG_CMD_* names now.
1401
1402 Signed-off-by: Jon Loeliger <[email protected]>
1403
1404commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9
1405Author: Jon Loeliger <[email protected]>
1406Date: Mon Jul 9 19:06:00 2007 -0500
1407
1408 cpu/m*: Remove obsolete references to CONFIG_COMMANDS
1409
1410 Signed-off-by: Jon Loeliger <[email protected]>
1411
1412commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa
1413Author: Jon Loeliger <[email protected]>
1414Date: Mon Jul 9 18:57:22 2007 -0500
1415
1416 cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS
1417
1418 Signed-off-by: Jon Loeliger <[email protected]>
1419
1420commit ab3abcbabd840928fb1eb5122118ca466b5e5013
1421Author: Jon Loeliger <[email protected]>
1422Date: Mon Jul 9 18:45:16 2007 -0500
1423
1424 board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
1425
1426 Signed-off-by: Jon Loeliger <[email protected]>
1427
1428commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9
1429Author: Jon Loeliger <[email protected]>
1430Date: Mon Jul 9 18:38:39 2007 -0500
1431
1432 board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS
1433
1434 Signed-off-by: Jon Loeliger <[email protected]>
1435
1436commit c508a4cefd8a953fc64957650506a035e6e3d9d1
1437Author: Jon Loeliger <[email protected]>
1438Date: Mon Jul 9 18:31:28 2007 -0500
1439
1440 board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS
1441
1442 Signed-off-by: Jon Loeliger <[email protected]>
1443
1444commit b9307262f8a9f3b5c9e15a6067eadc17407146f6
1445Author: Jon Loeliger <[email protected]>
1446Date: Mon Jul 9 18:24:55 2007 -0500
1447
1448 board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
1449
1450 Signed-off-by: Jon Loeliger <[email protected]>
1451
1452commit fcec2eb93e126400009729328e797f12bc94f1fd
1453Author: Jon Loeliger <[email protected]>
1454Date: Mon Jul 9 18:19:09 2007 -0500
1455
1456 board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
1457
1458 Signed-off-by: Jon Loeliger <[email protected]>
1459
1460commit a593814f2be0c9cdc3133cd550b167b8a988328f
1461Author: Jon Loeliger <[email protected]>
1462Date: Mon Jul 9 18:10:50 2007 -0500
1463
1464 rtc/: Remove obsolete references to CONFIG_COMMANDS
1465
1466 Signed-off-by: Jon Loeliger <[email protected]>
1467
1468commit 67350568f9d46e66c21829f3513b3db0caeb948b
1469Author: Jon Loeliger <[email protected]>
1470Date: Mon Jul 9 18:05:38 2007 -0500
1471
1472 lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS
1473
1474 Signed-off-by: Jon Loeliger <[email protected]>
1475
1476commit 7def6b34f910f08d7ef0a14646da067719237ca2
1477Author: Jon Loeliger <[email protected]>
1478Date: Mon Jul 9 18:02:11 2007 -0500
1479
1480 lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
1481
1482 Signed-off-by: Jon Loeliger <[email protected]>
1483
1484commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb
1485Author: Jon Loeliger <[email protected]>
1486Date: Mon Jul 9 17:56:50 2007 -0500
1487
1488 fs/: Remove obsolete references to CONFIG_COMMANDS
1489
1490 Signed-off-by: Jon Loeliger <[email protected]>
1491
1492commit c91898bbc505aff3e12a807af88e76da18efb7ee
1493Author: Jon Loeliger <[email protected]>
1494Date: Mon Jul 9 17:46:09 2007 -0500
1495
1496 tools/: Remove obsolete references to CONFIG_COMMANDS
1497
1498 Signed-off-by: Jon Loeliger <[email protected]>
1499
1500commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01
1501Author: Jon Loeliger <[email protected]>
1502Date: Mon Jul 9 17:45:14 2007 -0500
1503
1504 net/: Remove obsolete references to CONFIG_COMMANDS
1505
1506 Signed-off-by: Jon Loeliger <[email protected]>
1507
1508commit cb51c0bf88f95a1bca68324b0126f8eed8b43273
1509Author: Jon Loeliger <[email protected]>
1510Date: Mon Jul 9 17:39:42 2007 -0500
1511
1512 drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS
1513
1514 Signed-off-by: Jon Loeliger <[email protected]>
1515
1516commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b
1517Author: Jon Loeliger <[email protected]>
1518Date: Mon Jul 9 17:30:01 2007 -0500
1519
1520 drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS
1521
1522 Signed-off-by: Jon Loeliger <[email protected]>
1523
1524commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29
1525Author: Jon Loeliger <[email protected]>
1526Date: Mon Jul 9 17:22:37 2007 -0500
1527
1528 disk/: Remove obsolete references to CONFIG_COMMANDS
1529
1530 Signed-off-by: Jon Loeliger <[email protected]>
1531
1532commit 639221c76c88215bd55af83ad174fc30d1940f8f
1533Author: Jon Loeliger <[email protected]>
1534Date: Mon Jul 9 17:15:49 2007 -0500
1535
1536 include/: Remove obsolete references to CONFIG_COMMANDS
1537 Mostly removed from comments here.
1538
1539 Signed-off-by: Jon Loeliger <[email protected]>
1540
239f05ee
WD		 1541commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
1542Author: Wolfgang Denk <[email protected]>
1543Date: Tue Jul 10 00:01:28 2007 +0200
1544
1545 Coding style cleanup; update CHANGELOG.
1546
1547 Signed-off-by: Wolfgang Denk <[email protected]>
1548
5728be38
WD		 1549commit c3517f919d0f61650cf3027fd4faf0f631142f6c
1550Author: Jon Loeliger <[email protected]>
1551Date: Sun Jul 8 18:10:08 2007 -0500
4ef218f6 1552
5728be38 1553 common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS
4ef218f6 1554
5728be38 1555 Signed-off-by: Jon Loeliger <[email protected]>
4ef218f6 1556
5728be38
WD		 1557commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39
1558Author: Jon Loeliger <[email protected]>
1559Date: Sun Jul 8 18:05:39 2007 -0500
4ef218f6 1560
5728be38 1561 common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS.
4ef218f6 1562
5728be38 1563 Signed-off-by: Jon Loeliger <[email protected]>
4ef218f6 1564
5728be38
WD		 1565commit c76fe47425afc7d5d670ff0539823c85d65d9c42
1566Author: Jon Loeliger <[email protected]>
1567Date: Sun Jul 8 18:02:23 2007 -0500
4ef218f6 1568
5728be38 1569 common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.
4ef218f6 1570
5728be38 1571 Signed-off-by: Jon Loeliger <[email protected]>
4ef218f6 1572
5728be38
WD		 1573commit baa26db4113679b80970ff447d91cc10217742a6
1574Author: Jon Loeliger <[email protected]>
1575Date: Sun Jul 8 17:51:39 2007 -0500
4ef218f6 1576
5728be38 1577 common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.
4ef218f6 1578
5728be38 1579 Signed-off-by: Jon Loeliger <[email protected]>
4ef218f6 1580
5728be38
WD		 1581commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd
1582Author: Jon Loeliger <[email protected]>
1583Date: Sun Jul 8 17:02:01 2007 -0500
1584
1585 Clear up confusion over the CMD_POST and POST_DIAG mess.
1586
1587 For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
1588 when it really means just CONFIG_CMD_DIAG. There is no CMD_POST.
1589 Clear this mess up some.
1590
1591 Signed-off-by: Jon Loeliger <[email protected]>
1592
1593commit b3631487105a57ab7cbadfc26efbaf9676275018
1594Author: Jon Loeliger <[email protected]>
1595Date: Sun Jul 8 15:45:08 2007 -0500
1596
1597 Remove references to the old cmd_confdefs.h include file.
1598
1599 Signed-off-by: Jon Loeliger <[email protected]>
1600
1601commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6
1602Author: Jon Loeliger <[email protected]>
1603Date: Sun Jul 8 15:42:59 2007 -0500
1604
1605 include/configs: Catch some CONFIG_CMD_* conversion stragglers.
1606
1607 Use new CONFIG_CMD_* in lwmon5.h board config file.
1608 Fix CONFIG_CMD_* typo braindamage in omap1510inn.h
1609
1610 Signed-off-by: Jon Loeliger <[email protected]>
1611
1612commit a5562901661bd428f7e5feb333f796372cb81019
1613Author: Jon Loeliger <[email protected]>
1614Date: Sun Jul 8 15:31:57 2007 -0500
1615
1616 include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files.
1617
1618 Signed-off-by: Jon Loeliger <[email protected]>
1619
1620commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e
1621Author: Jon Loeliger <[email protected]>
1622Date: Sun Jul 8 15:02:44 2007 -0500
1623
1624 include/configs: Use new CONFIG_CMD_* in various S* named board config files.
1625
1626 Signed-off-by: Jon Loeliger <[email protected]>
1627
1628commit e9a0f8f15c11f337967aa0600ad6e8af33037f50
1629Author: Jon Loeliger <[email protected]>
1630Date: Sun Jul 8 15:12:40 2007 -0500
1631
1632 include/configs: Use new CONFIG_CMD_* in various R* named board config files.
1633
1634 Signed-off-by: Jon Loeliger <[email protected]>
1635
1636commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f
1637Author: Jon Loeliger <[email protected]>
1638Date: Sun Jul 8 14:55:07 2007 -0500
1639
1640 include/configs: Use new CONFIG_CMD_* in various Q* named board config files.
1641
1642 Signed-off-by: Jon Loeliger <[email protected]>
1643
1644commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e
1645Author: Jon Loeliger <[email protected]>
1646Date: Sun Jul 8 14:49:44 2007 -0500
1647
1648 include/configs: Use new CONFIG_CMD_* in various P* named board config files.
1649
1650 Signed-off-by: Jon Loeliger <[email protected]>
1651
1652commit e18a1061a8630cb67995fdf99afd3fb50d1b187d
1653Author: Jon Loeliger <[email protected]>
1654Date: Sun Jul 8 14:21:43 2007 -0500
1655
1656 include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files.
1657
1658 Signed-off-by: Jon Loeliger <[email protected]>
1659
1660commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2
1661Author: Jon Loeliger <[email protected]>
1662Date: Sun Jul 8 14:14:17 2007 -0500
1663
1664 include/configs: Use new CONFIG_CMD_* in various M* named board config files.
1665
1666 Signed-off-by: Jon Loeliger <[email protected]>
1667
1668commit 348f258f24253433e4a2302a0bbceb6740a67246
1669Author: Jon Loeliger <[email protected]>
1670Date: Sun Jul 8 13:46:18 2007 -0500
1671
1672 include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files.
1673
1674 Signed-off-by: Jon Loeliger <[email protected]>
1675
1676commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a
1677Author: Jon Loeliger <[email protected]>
1678Date: Sun Jul 8 10:09:35 2007 -0500
1679
1680 include/configs: Use new CONFIG_CMD_* in various H* named board config files.
1681
1682 Signed-off-by: Jon Loeliger <[email protected]>
1683
1684commit 60a0876b5106b34220e459c208bbf648073306c0
1685Author: Jon Loeliger <[email protected]>
1686Date: Sat Jul 7 21:04:26 2007 -0500
1687
1688 include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files.
1689
1690 Signed-off-by: Jon Loeliger <[email protected]>
1691
1692commit dcaa71562826a2466e894c868d132509dcda8444
1693Author: Jon Loeliger <[email protected]>
1694Date: Sat Jul 7 20:56:05 2007 -0500
1695
1696 include/configs: Use new CONFIG_CMD_* in various E* named board config files.
1697
1698 Signed-off-by: Jon Loeliger <[email protected]>
1699
1700commit 3c3227f3c737502311b25b72084573901cbbf17d
1701Author: Jon Loeliger <[email protected]>
1702Date: Sat Jul 7 20:40:43 2007 -0500
1703
1704 include/configs: Use new CONFIG_CMD_* in various D* named board config files.
1705
1706 Signed-off-by: Jon Loeliger <[email protected]>
1707
1708commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c
1709Author: Jon Loeliger <[email protected]>
1710Date: Thu Jul 5 19:52:35 2007 -0500
1711
1712 include/configs: Use new CONFIG_CMD_* in various C* named board config files.
1713
1714 Signed-off-by: Jon Loeliger <[email protected]>
1715
1716commit de8b2a6e33298dcdb10bdda48db25e53c3089eba
1717Author: Jon Loeliger <[email protected]>
1718Date: Thu Jul 5 19:32:07 2007 -0500
1719
1720 include/configs: Use new CONFIG_CMD_* in various B* named board config files.
1721
1722 Signed-off-by: Jon Loeliger <[email protected]>
1723
1724commit 498ff9a228485bd4b9f23d066bada268f9add1dd
1725Author: Jon Loeliger <[email protected]>
1726Date: Thu Jul 5 19:13:52 2007 -0500
1727
1728 include/configs: Use new CONFIG_CMD_* in various A* named board config files.
1729
1730 Since ADS860.h includes "board/fads/fads.h" with ramifications
1731 on the CONFIG_COMMAND treatment, it too has to be adjusted to
1732 exclude already configured commands in this same commit.
1733
1734 Signed-off-by: Jon Loeliger <[email protected]>
1735
1736commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
1737Author: Stefan Roese <[email protected]>
1738Date: Fri Jul 6 09:45:47 2007 +0200
1739
1740 Fix problem with get/setdcr commands introduced by cfg patches
1741
1742 Signed-off-by: Stefan Roese <[email protected]>
1743
1744commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
1745Author: Wolfgang Denk <[email protected]>
1746Date: Fri Jul 6 02:50:19 2007 +0200
1747
1748 Code cleanup and default config update for STC GP3 SSA board.
1749
1750 Signed-off-by: Wolfgang Denk <[email protected]>
1751
1752commit e4dbe1b215f5c6c462e76909d240bd96472b84de
1753Author: Wolfgang Denk <[email protected]>
1754Date: Thu Jul 5 17:56:27 2007 +0200
1755
1756 Fixing some typos etc. introduced mainly by cfg patches.
1757
1758 Signed-off-by: Wolfgang Denk <[email protected]>
1759
1760commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd
1761Author: Wolfgang Denk <[email protected]>
1762Date: Thu Jul 5 11:12:16 2007 +0200
1763
1764 Minor coding style cleanup. Update CHANGELOG.
1765
b6b46845
WD		 1766commit dca3b3d6d6396b67e5e84af53452164923c73443
1767Author: Jon Loeliger <[email protected]>
1768Date: Wed Jul 4 22:33:46 2007 -0500
1769
1770 include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.
1771
1772 Signed-off-by: Jon Loeliger <[email protected]>
1773
1774commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7
1775Author: Jon Loeliger <[email protected]>
1776Date: Wed Jul 4 22:33:38 2007 -0500
1777
1778 include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files.
1779
1780 Signed-off-by: Jon Loeliger <[email protected]>
1781
1782commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76
1783Author: Jon Loeliger <[email protected]>
1784Date: Wed Jul 4 22:33:30 2007 -0500
1785
1786 include/configs: Use new CONFIG_CMD_* in various s* named board config files.
1787
1788 Signed-off-by: Jon Loeliger <[email protected]>
1789
1790commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8
1791Author: Jon Loeliger <[email protected]>
1792Date: Wed Jul 4 22:33:23 2007 -0500
1793
1794 include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files.
1795
1796 Signed-off-by: Jon Loeliger <[email protected]>
1797
1798commit 26a34560d56a9df5bc2ae23525d9229736134757
1799Author: Jon Loeliger <[email protected]>
1800Date: Wed Jul 4 22:33:17 2007 -0500
1801
1802 include/configs: Use new CONFIG_CMD_* in various p* named board config files.
1803
1804 Signed-off-by: Jon Loeliger <[email protected]>
1805
1806commit a5cb23092a7d31490a33d4ec871468b63babfa3c
1807Author: Jon Loeliger <[email protected]>
1808Date: Wed Jul 4 22:33:13 2007 -0500
1809
1810 include/configs: Use new CONFIG_CMD_* in various o* named board config files.
1811
1812 Signed-off-by: Jon Loeliger <[email protected]>
1813
1814commit 929a2bfd142737003a8fc32e1b86e1f2c1850257
1815Author: Jon Loeliger <[email protected]>
1816Date: Wed Jul 4 22:33:07 2007 -0500
1817
1818 include/configs: Use new CONFIG_CMD_* in various n* named board config files.
1819
1820 Signed-off-by: Jon Loeliger <[email protected]>
1821
1822commit 5dc11a511960d490f7f01ffd746edfe6277f99b0
1823Author: Jon Loeliger <[email protected]>
1824Date: Wed Jul 4 22:33:01 2007 -0500
1825
1826 include/configs: Use new CONFIG_CMD_* in various m* named board config files.
1827
1828 Signed-off-by: Jon Loeliger <[email protected]>
1829
1830commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4
1831Author: Jon Loeliger <[email protected]>
1832Date: Wed Jul 4 22:32:57 2007 -0500
1833
1834 include/configs: Use new CONFIG_CMD_* in various l* named board config files.
1835
1836 Signed-off-by: Jon Loeliger <[email protected]>
1837
1838commit bc234c129fa04fb9fa33530930e5cbc6084cd47a
1839Author: Jon Loeliger <[email protected]>
1840Date: Wed Jul 4 22:32:51 2007 -0500
1841
1842 include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files.
1843
1844 Signed-off-by: Jon Loeliger <[email protected]>
1845
1846commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31
1847Author: Jon Loeliger <[email protected]>
1848Date: Wed Jul 4 22:32:32 2007 -0500
1849
1850 include/configs: Use new CONFIG_CMD_* in various i* named board config files.
1851
1852 Signed-off-by: Jon Loeliger <[email protected]>
1853
1854commit 48d5d102a2f2e619c92050b9aedbb69689185bc0
1855Author: Jon Loeliger <[email protected]>
1856Date: Wed Jul 4 22:32:25 2007 -0500
1857
1858 include/configs: Use new CONFIG_CMD_* in various h* named board config files.
1859
1860 Signed-off-by: Jon Loeliger <[email protected]>
1861
1862commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36
1863Author: Jon Loeliger <[email protected]>
1864Date: Wed Jul 4 22:32:19 2007 -0500
1865
1866 include/configs: Use new CONFIG_CMD_* in various g* named board config files.
1867
1868 Signed-off-by: Jon Loeliger <[email protected]>
1869
1870commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e
1871Author: Jon Loeliger <[email protected]>
1872Date: Wed Jul 4 22:32:10 2007 -0500
1873
1874 include/configs: Use new CONFIG_CMD_* in various e* named board config files.
1875
1876 Signed-off-by: Jon Loeliger <[email protected]>
1877
1878commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4
1879Author: Jon Loeliger <[email protected]>
1880Date: Wed Jul 4 22:32:03 2007 -0500
1881
1882 include/configs: Use new CONFIG_CMD_* in various d* named board config files.
1883
1884 Signed-off-by: Jon Loeliger <[email protected]>
1885
1886commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b
1887Author: Jon Loeliger <[email protected]>
1888Date: Wed Jul 4 22:31:56 2007 -0500
1889
1890 include/configs: Use new CONFIG_CMD_* in various c* named board config files.
1891
1892 Signed-off-by: Jon Loeliger <[email protected]>
1893
1894commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264
1895Author: Jon Loeliger <[email protected]>
1896Date: Wed Jul 4 22:31:49 2007 -0500
1897
1898 include/configs: Use new CONFIG_CMD_* in various b* named board config files.
1899
1900 Signed-off-by: Jon Loeliger <[email protected]>
1901
1902commit 0b361c916617aff79e647b40f0e43361e0bbaccf
1903Author: Jon Loeliger <[email protected]>
1904Date: Wed Jul 4 22:31:42 2007 -0500
1905
1906 include/configs: Use new CONFIG_CMD_* in various a* named board config files.
1907
1908 Signed-off-by: Jon Loeliger <[email protected]>
1909
1910commit b730cda82e362df6a22f4c59c0a9b97e885b1014
1911Author: Jon Loeliger <[email protected]>
1912Date: Wed Jul 4 22:31:35 2007 -0500
1913
1914 include/configs: Use new CONFIG_CMD_* in mpc5xx board config files.
1915
1916 Signed-off-by: Jon Loeliger <[email protected]>
1917
1918commit d794cfefead5fc177cf4f41164e80382e9c9484a
1919Author: Jon Loeliger <[email protected]>
1920Date: Wed Jul 4 22:31:15 2007 -0500
1921
1922 include/configs: Use new CONFIG_CMD_* in various 5200 board config files.
1923
1924 Signed-off-by: Jon Loeliger <[email protected]>
1925
1926commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c
1927Author: Jon Loeliger <[email protected]>
1928Date: Wed Jul 4 22:31:07 2007 -0500
1929
1930 include/configs: Use new CONFIG_CMD_* in STx board config files.
1931
1932 Signed-off-by: Jon Loeliger <[email protected]>
1933
1934commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc
1935Author: Jon Loeliger <[email protected]>
1936Date: Wed Jul 4 22:30:58 2007 -0500
1937
1938 include/configs: Use new CONFIG_CMD_* in sbc* board config files.
1939
1940 Signed-off-by: Jon Loeliger <[email protected]>
1941
1942commit 2694690e285acaa34922f55f4b5ae030da60c55a
1943Author: Jon Loeliger <[email protected]>
1944Date: Wed Jul 4 22:30:50 2007 -0500
1945
1946 include/configs: Use new CONFIG_CMD_* in TQM board config files.
1947
1948 Signed-off-by: Jon Loeliger <[email protected]>
1949
1950commit 1cc4c458329765b58e584a19821e796b3c10e976
1951Author: Jon Loeliger <[email protected]>
1952Date: Wed Jul 4 22:30:28 2007 -0500
1953
1954 include/configs: Use new CONFIG_CMD_* in 82xx board config files.
1955
1956 Signed-off-by: Jon Loeliger <[email protected]>
1957
1958commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e
1959Author: Jon Loeliger <[email protected]>
1960Date: Wed Jul 4 22:30:06 2007 -0500
1961
1962 include/configs: Use new CONFIG_CMD_* in 83xx board config files.
1963
1964 Signed-off-by: Jon Loeliger <[email protected]>
1965
5728be38
WD		 1966commit b44896215a09c60fa40cae906f7ed207bbc2c492
1967Author: Sergei Poselenov <[email protected]>
1968Date: Thu Jul 5 08:17:37 2007 +0200
1969
1970 Merged POST framework with the current TOT.
1971
1972 Signed-off-by: Sergei Poselenov <[email protected]>
1973
b6b46845
WD		 1974commit b24629fa377214d63bb40d1360e354b6d3e4af56
1975Author: Jon Loeliger <[email protected]>
1976Date: Wed Jun 13 13:23:15 2007 -0500
1977
1978 mpc86xx: Remove old CFG_CMD_* references.
1979
1980 Signed-off-by: Jon Loeliger <[email protected]>
1981
1982commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a
1983Author: Jon Loeliger <[email protected]>
1984Date: Wed Jun 13 13:22:54 2007 -0500
1985
1986 Add MPC8568MDS to MAKEALL 85xx target.
1987
1988 It was missing from the original port submission.
1989
1990 Signed-off-by: Jon Loeliger <[email protected]>
1991
1992commit 2835e518c969e5124ba1174eef3e8375e12fa7d5
1993Author: Jon Loeliger <[email protected]>
1994Date: Wed Jun 13 13:22:08 2007 -0500
1995
1996 include/configs: Use new CONFIG_CMD_* in 85xx board config files.
1997
1998 Signed-off-by: Jon Loeliger <[email protected]>
1999
2000commit 56b304ac2091689506088a9ae67f63fd6300cf16
2001Author: Jon Loeliger <[email protected]>
2002Date: Wed Jun 13 13:21:37 2007 -0500
2003
2004 Fix #if typo in CONFIG_CMD_* changes.
2005
2006 Signed-off-by: Jon Loeliger <[email protected]>
2007
5728be38
WD		 2008commit f780b83316d9af1f61d71cc88b1917b387b9b995
2009Author: Niklaus Giger <[email protected]>
2010Date: Wed Jun 27 18:11:38 2007 +0200
2011
2012 resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
2013
2014 Signed-off-by: Niklaus Giger <[email protected]>
2015
2016commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
2017Author: Stefan Roese <[email protected]>
2018Date: Wed Jul 4 10:06:30 2007 +0200
2019
2020 ppc4xx: Update lwmon5 board
2021
2022 - Add optional ECC generation routine to preserve existing
2023 RAM values. This is needed for the Linux log-buffer support
2024 - Add optional DDR2 setup with CL=4
2025 - GPIO50 not used anymore
2026 - Lime register setup added
2027
2028 Signed-off-by: Stefan Roese <[email protected]>
2029
b6b46845
WD		 2030commit 6810a34677dbc446334f5e451f1682426dd33b49
2031Author: Grant Likely <[email protected]>
2032Date: Tue Jul 3 00:17:28 2007 -0600
2033
2034 Fix Makefile to use $(MKCONFIG) macro for all board ports
2035
2036 Signed-off-by: Grant Likely <[email protected]>
2037
2038commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926
2039Author: Grant Likely <[email protected]>
2040Date: Tue Jul 3 00:17:28 2007 -0600
2041
2042 Fix Makefile to use $(MKCONFIG) macro for all board ports
2043
2044 Signed-off-by: Grant Likely <[email protected]>
2045
2046commit 057004f4a4863554d56cc56268bfa7c7d9738e27
2047Author: Grant Likely <[email protected]>
2048Date: Tue Jul 3 00:34:49 2007 -0600
2049
2050 Correct fixup relocation for mpc83xx
2051
2052 Signed-off-by: Grant Likely <[email protected]>
2053
2054commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96
2055Author: Grant Likely <[email protected]>
2056Date: Tue Jul 3 00:34:44 2007 -0600
2057
2058 Correct fixup relocation for mpc8260
2059
2060 Signed-off-by: Grant Likely <[email protected]>
2061
2062commit f3a52fe05923935db86985daf9438e2f70ac39aa
2063Author: Grant Likely <[email protected]>
2064Date: Tue Jul 3 00:34:39 2007 -0600
2065
2066 Correct fixup relocation for mpc824x
2067
2068 Signed-off-by: Grant Likely <[email protected]>
2069
2070commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00
2071Author: Grant Likely <[email protected]>
2072Date: Tue Jul 3 00:34:34 2007 -0600
2073
2074 Correct fixup relocation for mpc8220
2075
2076 Signed-off-by: Grant Likely <[email protected]>
2077
2078commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90
2079Author: Grant Likely <[email protected]>
2080Date: Tue Jul 3 00:34:29 2007 -0600
2081
2082 Correct fixup relocation for MPC5xxx
2083
2084 Signed-off-by: Grant Likely <[email protected]>
2085
2086commit 3649cd99ba815b6601868735765602f00ef3692b
2087Author: Grant Likely <[email protected]>
2088Date: Tue Jul 3 00:34:24 2007 -0600
2089
2090 Correct relocation fixup for mpc5xx
2091
2092 Signed-off-by: Grant Likely <[email protected]>
2093
2094commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325
2095Author: Grant Likely <[email protected]>
2096Date: Tue Jul 3 00:34:19 2007 -0600
2097
2098 Don't set gd->reloc_off if relocation of .fixup works correctly
2099
2100 Signed-off-by: Grant Likely <[email protected]>
2101
2102commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28
2103Author: Grant Likely <[email protected]>
2104Date: Tue Jul 3 00:34:14 2007 -0600
2105
2106 Remove obsolete mpc83xx linker scripts
2107
2108 Signed-off-by: Grant Likely <[email protected]>
2109
2110commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b
2111Author: Grant Likely <[email protected]>
2112Date: Tue Jul 3 00:34:09 2007 -0600
2113
2114 Consolidate mpc8260 linker scripts
2115
2116 Signed-off-by: Grant Likely <[email protected]>
2117
2118commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0
2119Author: Grant Likely <[email protected]>
2120Date: Tue Jul 3 00:34:04 2007 -0600
2121
2122 Remove obsolete mpc824x linker scripts
2123
2124 Signed-off-by: Grant Likely <[email protected]>
2125
2126commit f94a3aecebc40ca0939c7d66d010009cf51be9e2
2127Author: Grant Likely <[email protected]>
2128Date: Tue Jul 3 00:33:59 2007 -0600
2129
2130 Remove obsolete mpc824x linker scripts (3 of 4)
2131
2132 Signed-off-by: Grant Likely <[email protected]>
2133
2134commit a71c084f3ac7fedf144537db2b2da47323068833
2135Author: Grant Likely <[email protected]>
2136Date: Tue Jul 3 00:33:53 2007 -0600
2137
2138 Remove obsolete mpc824x linker scripts (2 of 4)
2139
2140 Signed-off-by: Grant Likely <[email protected]>
2141
2142commit f670a15468d1365241d40022b9408e1004181f5e
2143Author: Grant Likely <[email protected]>
2144Date: Tue Jul 3 00:33:48 2007 -0600
2145
2146 Remove obsolete mpc824x linker scripts (1 of 4)
2147
2148 Signed-off-by: Grant Likely <[email protected]>
2149
2150commit 09555bd45a04c0e54f172528d21bc18896550d28
2151Author: Grant Likely <[email protected]>
2152Date: Tue Jul 3 00:33:43 2007 -0600
2153
2154 Remove obsolete mpc8220 linker scripts
2155
2156 Signed-off-by: Grant Likely <[email protected]>
2157
2158commit 5efb992f046e51225c93d52f80fecbe433abd789
2159Author: Grant Likely <[email protected]>
2160Date: Tue Jul 3 00:33:38 2007 -0600
2161
2162 Remove obsolete mpc5xxx linker scripts (3 of 3)
2163
2164 Signed-off-by: Grant Likely <[email protected]>
2165
2166commit 07c13dfef65b31647e69d8b61daa1eec598add1a
2167Author: Grant Likely <[email protected]>
2168Date: Tue Jul 3 00:33:33 2007 -0600
2169
2170 Remove obsolete mpc5xxx linker scripts (2 of 3)
2171
2172 Signed-off-by: Grant Likely <[email protected]>
2173
2174commit b4f67513a624ce85866c66c575bd2d9d7977d7f0
2175Author: Grant Likely <[email protected]>
2176Date: Tue Jul 3 00:33:28 2007 -0600
2177
2178 Remove obsolete mpc5xxx linker scripts (1 of 3)
2179
2180 Signed-off-by: Grant Likely <[email protected]>
2181
2182commit b7d8e05f8675249b5f208aa73babeed384a4519d
2183Author: Grant Likely <[email protected]>
2184Date: Tue Jul 3 00:33:23 2007 -0600
2185
2186 Remove obsolete mpc5xx linker scripts
2187
2188 Signed-off-by: Grant Likely <[email protected]>
2189
2190commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7
2191Author: Grant Likely <[email protected]>
2192Date: Tue Jul 3 00:33:18 2007 -0600
2193
2194 Consolidate mpc83xx linker scripts
2195
2196 Signed-off-by: Grant Likely <[email protected]>
2197
2198commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365
2199Author: Grant Likely <[email protected]>
2200Date: Tue Jul 3 00:33:13 2007 -0600
2201
2202 Consolidate mpc8260 linker scripts
2203
2204 Signed-off-by: Grant Likely <[email protected]>
2205
2206commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207
2207Author: Grant Likely <[email protected]>
2208Date: Tue Jul 3 00:33:08 2007 -0600
2209
2210 Consolidate mpc824x linker scripts
2211
2212 Signed-off-by: Grant Likely <[email protected]>
2213
2214commit 9c757b789a59a855db57b448dd825329c4e9c4a0
2215Author: Grant Likely <[email protected]>
2216Date: Tue Jul 3 00:33:03 2007 -0600
2217
2218 Consolidate mpc8220 linker scripts
2219
2220 Signed-off-by: Grant Likely <[email protected]>
2221
2222commit d181c9a15cd41863fe24840d17848429f27d3c8c
2223Author: Grant Likely <[email protected]>
2224Date: Tue Jul 3 00:32:58 2007 -0600
2225
2226 Consolidate mpc5xxx linker scripts
2227
2228 Signed-off-by: Grant Likely <[email protected]>
2229
2230commit 287ac924adb7291bebe5086652a362a30ab28b13
2231Author: Grant Likely <[email protected]>
2232Date: Tue Jul 3 00:32:53 2007 -0600
2233
2234 Consolidate mpc5xx linker scripts
2235
2236 Signed-off-by: Grant Likely <[email protected]>
2237
2238commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd
2239Author: Wolfgang Denk <[email protected]>
2240Date: Wed Jul 4 00:43:53 2007 +0200
2241
2242 Fix a few file permission problems.
2243
2244 Signed-off-by: Wolfgang Denk <[email protected]>
2245
2246commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c
2247Author: Wolfgang Denk <[email protected]>
2248Date: Wed Jul 4 00:38:38 2007 +0200
2249
2250 Minor coding style cleanup. Rebuild CHANGELOG file.
2251
78e0cf2d
WD		 2252commit 2f9c19e496acb6bb50d9299e1aab377625d48c38
2253Author: Jon Loeliger <[email protected]>
2254Date: Mon Jun 11 19:03:44 2007 -0500
2255
2256 configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
2257
2258 Signed-off-by: Jon Loeliger <[email protected]>
2259
2260commit 602ad3b33d9ceef83dbab46be68646d645d637ee
2261Author: Jon Loeliger <[email protected]>
2262Date: Mon Jun 11 19:03:39 2007 -0500
2263
2264 README: Rewrite command line config to use CONFIG_CMD_* names.
2265
2266 Signed-off-by: Jon Loeliger <[email protected]>
2267
2268commit 72a074cec68e5bad60d63206c050974e08afd804
2269Author: Jon Loeliger <[email protected]>
2270Date: Mon Jun 11 19:03:34 2007 -0500
2271
2272 include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2273
2274 This is a compatibility step that allows both the older form
2275 and the new form to co-exist for a while until the older can
2276 be removed entirely.
2277
2278 All transformations are of the form:
2279 Before:
2280 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2281 After:
2282 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2283
2284 Signed-off-by: Jon Loeliger <[email protected]>
2285
2286commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b
2287Author: Jon Loeliger <[email protected]>
2288Date: Mon Jun 11 19:03:28 2007 -0500
2289
2290 tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2291
2292 This is a compatibility step that allows both the older form
2293 and the new form to co-exist for a while until the older can
2294 be removed entirely.
2295
2296 All transformations are of the form:
2297 Before:
2298 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2299 After:
2300 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2301
2302 Signed-off-by: Jon Loeliger <[email protected]>
2303
2304commit 9107ebe0d352420895ab69b715697bdebc8caf50
2305Author: Jon Loeliger <[email protected]>
2306Date: Mon Jun 11 19:03:23 2007 -0500
2307
2308 board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2309
2310 This is a compatibility step that allows both the older form
2311 and the new form to co-exist for a while until the older can
2312 be removed entirely.
2313
2314 All transformations are of the form:
2315 Before:
2316 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2317 After:
2318 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2319
2320 Signed-off-by: Jon Loeliger <[email protected]>
2321
2322commit 5e378003d592ea828ec69d6defcd4de79096dd5c
2323Author: Jon Loeliger <[email protected]>
2324Date: Mon Jun 11 19:03:19 2007 -0500
2325
2326 board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2327
2328 This is a compatibility step that allows both the older form
2329 and the new form to co-exist for a while until the older can
2330 be removed entirely.
2331
2332 All transformations are of the form:
2333 Before:
2334 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2335 After:
2336 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2337
2338 Signed-off-by: Jon Loeliger <[email protected]>
2339
2340commit 737184114ec9c9e0ab94d6713536126073bd2472
2341Author: Jon Loeliger <[email protected]>
2342Date: Mon Jun 11 19:03:15 2007 -0500
2343
2344 cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2345
2346 This is a compatibility step that allows both the older form
2347 and the new form to co-exist for a while until the older can
2348 be removed entirely.
2349
2350 All transformations are of the form:
2351 Before:
2352 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2353 After:
2354 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2355
2356 Signed-off-by: Jon Loeliger <[email protected]>
2357
2358commit f48070fe5fe440dfb5ee5268c920de70e48ea327
2359Author: Jon Loeliger <[email protected]>
2360Date: Mon Jun 11 19:03:08 2007 -0500
2361
2362 cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2363
2364 This is a compatibility step that allows both the older form
2365 and the new form to co-exist for a while until the older can
2366 be removed entirely.
2367
2368 All transformations are of the form:
2369 Before:
2370 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2371 After:
2372 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2373
2374 Signed-off-by: Jon Loeliger <[email protected]>
2375
2376commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2
2377Author: Jon Loeliger <[email protected]>
2378Date: Mon Jun 11 19:03:03 2007 -0500
2379
2380 lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2381
2382 This is a compatibility step that allows both the older form
2383 and the new form to co-exist for a while until the older can
2384 be removed entirely.
2385
2386 All transformations are of the form:
2387 Before:
2388 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2389 After:
2390 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2391
2392 Signed-off-by: Jon Loeliger <[email protected]>
2393
2394commit 73f032021ec5f13cda8faa4e34b6de80960eb86f
2395Author: Jon Loeliger <[email protected]>
2396Date: Mon Jun 11 19:02:58 2007 -0500
2397
2398 lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2399
2400 This is a compatibility step that allows both the older form
2401 and the new form to co-exist for a while until the older can
2402 be removed entirely.
2403
2404 All transformations are of the form:
2405 Before:
2406 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2407 After:
2408 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2409
2410 Signed-off-by: Jon Loeliger <[email protected]>
2411
2412commit 98b79003c21c2578206003256de4e781d6b36ca8
2413Author: Jon Loeliger <[email protected]>
2414Date: Mon Jun 11 19:02:53 2007 -0500
2415
2416 rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2417
2418 This is a compatibility step that allows both the older form
2419 and the new form to co-exist for a while until the older can
2420 be removed entirely.
2421
2422 All transformations are of the form:
2423 Before:
2424 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2425 After:
2426 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2427
2428 Signed-off-by: Jon Loeliger <[email protected]>
2429
2430commit 6e2115acb6a892d53a6881bf253ae41d3df39156
2431Author: Jon Loeliger <[email protected]>
2432Date: Mon Jun 11 19:02:49 2007 -0500
2433
2434 net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2435
2436 This is a compatibility step that allows both the older form
2437 and the new form to co-exist for a while until the older can
2438 be removed entirely.
2439
2440 All transformations are of the form:
2441 Before:
2442 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2443 After:
2444 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2445
2446 Signed-off-by: Jon Loeliger <[email protected]>
2447
2448commit 45cdb9b72c94655c7308b464a2666057c0b286e0
2449Author: Jon Loeliger <[email protected]>
2450Date: Mon Jun 11 19:02:34 2007 -0500
2451
2452 disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2453
2454 This is a compatibility step that allows both the older form
2455 and the new form to co-exist for a while until the older can
2456 be removed entirely.
2457
2458 All transformations are of the form:
2459 Before:
2460 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2461 After:
2462 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2463
2464 Signed-off-by: Jon Loeliger <[email protected]>
2465
2466commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a
2467Author: Jon Loeliger <[email protected]>
2468Date: Mon Jun 11 19:02:20 2007 -0500
2469
2470 fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2471
2472 This is a compatibility step that allows both the older form
2473 and the new form to co-exist for a while until the older can
2474 be removed entirely.
2475
2476 All transformations are of the form:
2477 Before:
2478 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2479 After:
2480 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2481
2482 Signed-off-by: Jon Loeliger <[email protected]>
2483
2484commit d5be43de93ff905c465e509d45a3164ef48d26e7
2485Author: Jon Loeliger <[email protected]>
2486Date: Mon Jun 11 19:02:10 2007 -0500
2487
2488 drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2489
2490 This is a compatibility step that allows both the older form
2491 and the new form to co-exist for a while until the older can
2492 be removed entirely.
2493
2494 All transformations are of the form:
2495 Before:
2496 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2497 After:
2498 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2499
2500 Signed-off-by: Jon Loeliger <[email protected]>
2501
2502commit b453960d4fdb87b3970d96119b90df2ed024fc4a
2503Author: Jon Loeliger <[email protected]>
2504Date: Mon Jun 11 19:02:05 2007 -0500
2505
2506 common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2507
2508 This is a compatibility step that allows both the older form
2509 and the new form to co-exist for a while until the older can
2510 be removed entirely.
2511
2512 All transformations are of the form:
2513 Before:
2514 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2515 After:
2516 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2517
2518 Signed-off-by: Jon Loeliger <[email protected]>
2519
2520commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0
2521Author: Jon Loeliger <[email protected]>
2522Date: Mon Jun 11 19:01:54 2007 -0500
2523
2524 common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2525
2526 This is a compatibility step that allows both the older form
2527 and the new form to co-exist for a while until the older can
2528 be removed entirely.
2529
2530 All transformations are of the form:
2531 Before:
2532 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2533 After:
2534 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2535
2536 Signed-off-by: Jon Loeliger <[email protected]>
2537
2538commit a76adc8142c1d956385a109e0b70f9319ede4d66
2539Author: Jon Loeliger <[email protected]>
2540Date: Mon Jun 11 19:01:43 2007 -0500
2541
2542 common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
2543
2544 This is a compatibility step that allows both the older form
2545 and the new form to co-exist for a while until the older can
2546 be removed entirely.
2547
2548 All transformations are of the form:
2549 Before:
2550 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
2551 After:
2552 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
2553
2554 Signed-off-by: Jon Loeliger <[email protected]>
2555
2556commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1
2557Author: Jon Loeliger <[email protected]>
2558Date: Mon Jun 11 19:01:34 2007 -0500
2559
2560 Introduce initial versions of new Command Config files.
2561
2562 Derive three new files from cmd_confdefs.h:
2563 config_bootp.h - Has BOOTP related config options, not commands
2564 config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
2565 config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
2566
2567 For now, include "config_bootp.h" for compatability until all
2568 users of it directly include it properly.
2569
2570 Signed-off-by: Jon Loeliger <[email protected]>
4ef218f6
WD		 2571
2572commit 1f2a05898658900dc5717761e27abf2052e67e13
2573Author: Mushtaq Khan <[email protected]>
2574Date: Sat Jun 30 18:50:48 2007 +0200
2575
2576 Fix S-ATA support.
2577
2578 Signed-off-by: mushtaq khan <[email protected]>
2579
2580commit a5d71e290f3673269be8eefb4ec44f53412f9461
2581Author: Heiko Schocher <[email protected]>
2582Date: Mon Jun 25 19:11:37 2007 +0200
2583
2584 [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
2585
2586 Signed-off-by: Heiko Schocher <[email protected]>
2587
2588commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
2589Author: Niklaus Giger <[email protected]>
2590Date: Mon Jun 25 17:03:13 2007 +0200
2591
2592 ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
2593
2594 This patch prints the DDR status registers upon machine check
2595 interrupt on the 440EPx/GRx. This can be useful especially when
2596 ECC support is enabled.
2597
2598 I added some small changes to the original patch from Niklaus to
2599 make it compile clean.
2600
2601 Signed-off-by: Niklaus Giger <[email protected]>
2602 Signed-off-by: Stefan Roese <[email protected]>
2603
2604commit 807018fb7faceb429ce0cb47baa2073746b33a4e
2605Author: Niklaus Giger <[email protected]>
2606Date: Mon Jun 25 16:50:55 2007 +0200
2607
2608 ppc4xx: Fix O=buildir builds
2609
2610 This patch fixes the problem to assemble cpu/ppc4xx/start.S
2611 experienced last week where building failed having specified
2612 O=../build.sequoia.
2613
2614 Signed-off-by: Niklaus Giger <[email protected]>
2615
2616commit 466fff1a7bb5fe764a06450626f6098219f446b8
2617Author: Stefan Roese <[email protected]>
2618Date: Mon Jun 25 15:57:39 2007 +0200
2619
2620 ppc4xx: Add pci_pre_init() for 405 boards
2621
2622 This patch removes the CFG_PCI_PRE_INIT option completely, since
2623 it's not needed anymore with the patch from Matthias Fuchs with
2624 the "weak" pci_pre_init() implementation.
2625
2626 Signed-off-by: Stefan Roese <[email protected]>
2627
2628commit 6f35c53166213c24a5a0e2390ed861136ff73870
2629Author: Matthias Fuchs <[email protected]>
2630Date: Sun Jun 24 17:41:21 2007 +0200
2631
2632 ppc4xx: Maintenance patch for esd's CPCI405 derivats
2633
2634 -add pci_pre_init() for pci interrupt fixup code
2635 -disable phy sleep mode via reset_phy() function
2636 -use correct io accessors
2637 -cleanup
2638
2639 Signed-off-by: Matthias Fuchs <[email protected]>
2640
2641commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
2642Author: Matthias Fuchs <[email protected]>
2643Date: Sun Jun 24 17:23:41 2007 +0200
2644
2645 ppc4xx: Add pci_pre_init() for 405 boards
2646
2647 This patch adds support for calling a plattform dependant
2648 pci_pre_init() function for 405 boards. This can be used to
2649 move the current pci_405gp_fixup_irq() function into the
2650 board code.
2651
2652 This patch also makes the CFG_PCI_PRE_INIT define obsolete.
2653 A default function with 'weak' attribute is used when
2654 a board specific pci_pre_init() is not implemented.
2655
2656 Signed-off-by: Matthias Fuchs <[email protected]>
2657
2658commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
2659Author: Wolfgang Denk <[email protected]>
2660Date: Fri Jun 22 23:59:00 2007 +0200
2661
2662 Coding stylke cleanup; rebuild CHANGELOG
2663
1636d1c8
WD		 2664commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
2665Author: Igor Lisitsin <[email protected]>
2666Date: Wed Apr 18 14:55:19 2007 +0400
2667
2668 Adapt log buffer code to support Linux 2.6
2669
2670 A new environment variable, "logversion", selects the log buffer
2671 behaviour. If it is not set or set to a value other than 2, then the
2672 old, Linux 2.4.4, behaviour is selected.
2673
2674 Signed-off-by: Igor Lisitsin <[email protected]>
2675 --
2676
2677commit a11e06965ec91270c51853407ff1261d3c740386
2678Author: Igor Lisitsin <[email protected]>
2679Date: Wed Mar 28 19:06:19 2007 +0400
2680
2681 Extend POST support for PPC440
2682
2683 Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
2684
2685 Signed-off-by: Igor Lisitsin <[email protected]>
2686 --
2687
4ef218f6
WD		 2688commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
2689Author: Heiko Schocher <[email protected]>
2690Date: Fri Jun 22 19:11:54 2007 +0200
2691
2692 [PCS440EP] upgrade the PCS440EP board:
2693 - Show on the Status LEDs, some States of the board.
2694 - Get the MAC addresses from the EEProm
2695 - use PREBOOT
2696 - use the CF on the board.
2697 - check the U-Boot image in the Flash with a SHA1
2698 checksum.
2699 - use dynamic TLB entries generation for the SDRAM
2700
2701 Signed-off-by: Heiko Schocher <[email protected]>
2702
2703commit 3a1f5c81b0b9557817a789bece839905581c2205
2704Author: Stefan Roese <[email protected]>
2705Date: Fri Jun 22 16:58:40 2007 +0200
2706
2707 ppc4xx: Fix problem with extended program_tlb() funtion
2708
2709 The recently extended program_tlb() function had a problem when
2710 multiple TLB's had to be setup (for example with 512MB of SDRAM). The
2711 virtual address was not incremented. This patch fixes this issue
2712 and is tested on Katmai with 512MB SDRAM.
2713
2714 Signed-off-by: Stefan Roese <[email protected]>
2715
1636d1c8
WD		 2716commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
2717Author: Rafal Jaworowski <[email protected]>
2718Date: Fri Jun 22 14:58:04 2007 +0200
2719
2720 [ppc] Fix build breakage for all non-4xx PowerPC variants.
2721
2722 - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
2723 - minor 4xx cleanup
2724
2725commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
2726Author: Wolfgang Denk <[email protected]>
2727Date: Wed Jun 20 18:14:24 2007 +0200
2728
2729 Coding style cleanup. Refresh CHANGELOG.
2730
83b4cfa3
WD		 2731commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
2732Author: Stefan Roese <[email protected]>
2733Date: Tue Jun 19 17:22:44 2007 +0200
2734
2735 ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
2736
2737 This patch adds a board command to configure the I2C bootstrap EEPROM
2738 values. Right now 533 and 667MHz are supported for booting either via NOR
2739 or NAND FLASH. Here the usage:
2740
2741 => bootstrap 533 nor ;to configure the board for 533MHz NOR booting
2742 => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
2743
2744 Signed-off-by: Stefan Roese <[email protected]>
2745
2746commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
2747Author: Stefan Roese <[email protected]>
2748Date: Tue Jun 19 16:42:31 2007 +0200
2749
2750 [ppc4xx] Fix problem with NAND booting on AMCC Acadia
2751
2752 The latest changes showed a problem with the location of the NAND-SPL
2753 image in the OCM and the init-data area (incl. cache). This patch
2754 fixes this problem.
2755
2756 Signed-off-by: Stefan Roese <[email protected]>
2757
2758commit 86ba99e34194394052d24c04dc40d1263d29a26f
2759Author: Stefan Roese <[email protected]>
2760Date: Tue Jun 19 16:40:58 2007 +0200
2761
2762 [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
2763
2764 Signed-off-by: Stefan Roese <[email protected]>
2765
2766commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
2767Author: Stefan Roese <[email protected]>
2768Date: Fri Jun 15 11:33:41 2007 +0200
2769
2770 [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
2771
2772 Now CONFIG_440 has to be defined in all PPC440 board config files.
2773
2774 Signed-off-by: Stefan Roese <[email protected]>
2775
2776commit efa35cf12d914d4caba942acd5a6c45f217de302
2777Author: Grzegorz Bernacki <[email protected]>
2778Date: Fri Jun 15 11:19:28 2007 +0200
2779
2780 ppc4xx: Clean up 440 exceptions handling
2781
2782 - Introduced dedicated switches for building 440 and 405 images required
2783 for 440-specific machine instructions like 'rfmci' etc.
2784
2785 - Exception vectors moved to the proper location (_start moved away from
2786 the critical exception handler space, which it occupied)
2787
2788 - CriticalInput now serviced (with default handler)
2789
2790 - MachineCheck properly serviced (added a dedicated handler and return
2791 subroutine)
2792
2793 - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
2794 unhandled and those not relevant for 4xx were eliminated)
2795
2796 - Eliminated Linux leftovers, removed dead code
2797
2798 Signed-off-by: Grzegorz Bernacki <[email protected]>
2799 Signed-off-by: Rafal Jaworowski <[email protected]>
2800 Signed-off-by: Stefan Roese <[email protected]>
2801
2802commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
2803Author: Stefan Roese <[email protected]>
2804Date: Fri Jun 15 08:18:01 2007 +0200
2805
2806 [ppc4xx] Add initial lwmon5 board support
2807
2808 This patch adds initial support for the Liebherr lwmon5 board euqipped
2809 with an AMCC 440EPx PowerPC.
2810
2811 Signed-off-by: Stefan Roese <[email protected]>
2812
2813commit 85f737376d5ff3d5f0d45a8b657686326d175307
2814Author: Stefan Roese <[email protected]>
2815Date: Fri Jun 15 07:39:43 2007 +0200
2816
2817 [ppc4xx] Extend 44x GPIO setup with default output state
2818
2819 The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
2820 is extended with the default GPIO output state (level).
2821
2822 Signed-off-by: Stefan Roese <[email protected]>
2823
2824commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
2825Author: Stefan Roese <[email protected]>
2826Date: Thu Jun 14 11:14:32 2007 +0200
2827
2828 [ppc4xx] Extend program_tlb() with virtual & physical addresses
2829
2830 Now program_tlb() allows to program a TLB (or multiple) with
2831 different virtual and physical addresses. With this change, now one
2832 physical region (e.g. SDRAM) can be mapped 2 times, once with caches
2833 diabled and once with caches enabled.
2834
2835 Signed-off-by: Stefan Roese <[email protected]>
2836
2837commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
2838Author: Detlev Zundel <[email protected]>
2839Date: Wed May 23 19:02:41 2007 +0200
2840
2841 Change 'repeatable' attribute of some commands to sensible values.
2842
2843 Most prominently this changes 'erase' to be non-repeatable.
2844
2845 Signed-off-by: Detlev Zundel <[email protected]>
2846
2847commit 5afb202093f6a001797db92cf695b93a70ea9ab4
2848Author: Detlev Zundel <[email protected]>
2849Date: Wed May 23 18:47:48 2007 +0200
2850
2851 Fix 'run' not to continue after interrupted command
2852
2853 Signed-off-by: Detlev Zundel <[email protected]>
2854
9986bc3e
WD		 2855commit 9b7464a2c88614e1061f509c48930a3d240d1a35
2856Author: Jason Jin <[email protected]>
2857Date: Mon Jun 11 15:14:24 2007 +0200
2858
2859 USB: This patch fix readl in ohci swap reg access.
2860
2861 Signed-off-by: Jason Jin <[email protected]>
2862
83b4cfa3
WD		 2863commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
2864Author: Bartlomiej Sieka <[email protected]>
2865Date: Fri Jun 8 14:52:22 2007 +0200
2866
2867 TQM5200: Add Flat Device Tree support, update default env. accordingly.
2868
2869 Signed-off-by: Jan Wrobel <[email protected]>
2870 Acked-by: Bartlomiej Sieka <[email protected]>
2871
2872commit 9045f33c023f698660a2e45d1b2194c0711abebc
2873Author: Wolfgang Denk <[email protected]>
2874Date: Fri Jun 8 10:24:58 2007 +0200
2875
2876 Fix config problems on SC3 board; make ide_reset_timeout work.
2877
2878commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
2879Author: Benoît Monin <[email protected]>
2880Date: Fri Jun 8 09:55:24 2007 +0200
2881
2882 [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
2883
2884 Set the correct value in GPIOx_TCR when configuring the gpio
2885 with CFG_440_GPIO_TABLE.
2886
2887 Signed-off-by: Benoit Monin <[email protected]>
2888 Signed-off-by: Stefan Roese <[email protected]>
2889
2890commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
2891Author: Wolfgang Denk <[email protected]>
2892Date: Wed Jun 6 16:26:56 2007 +0200
2893
2894 Coding Style cleanup; generate new CHANGELOG file.
2895
2896 Signed-off-by: Wolfgang Denk <[email protected]>
2897
9986bc3e
WD		 2898commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243
2899Author: Markus Klotzbuecher <[email protected]>
2900Date: Wed Jun 6 11:49:44 2007 +0200
2901
2902 TRAB, USB: update trab board configuration for use of generic ohci driver
2903
2904commit dace45acd1c1357daa9322099d07c9a9e08b0024
2905Author: Markus Klotzbuecher <[email protected]>
2906Date: Wed Jun 6 11:49:43 2007 +0200
2907
2908 USB: ohci fixes and cleanup for ppc4xx and yosemite board.
2909
2910commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df
2911Author: Markus Klotzbuecher <[email protected]>
2912Date: Wed Jun 6 11:49:43 2007 +0200
2913
2914 USB: ohci fixes and cleanup for mpc5xxx and IceCube board config
2915
2916commit fc43be478f2aa37ce38acd85355038866e4162af
2917Author: Markus Klotzbuecher <[email protected]>
2918Date: Wed Jun 6 11:49:35 2007 +0200
2919
2920 USB/OHCI: endianness cleanup in the generic ohci driver
2921
725671cc
WD		 2922commit c440bfe6d6d92d66478a7e84402b31f48413617b
2923Author: Stefan Roese <[email protected]>
2924Date: Wed Jun 6 11:42:13 2007 +0200
2925
2926 ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
2927
2928 This patch adds NAND booting support for the AMCC Acadia eval board.
2929
2930 Please make sure to configure jumper J7 to position 2-3 when booting
2931 from NOR, and to position 1-2 when booting for NAND.
2932
2933 I also added a board command to configure the I2C bootstrap EEPROM
2934 values. Right now only 267MHz is support for booting either via NOR
2935 or NAND FLASH. Here the usage:
2936
2937 => bootstrap 267 nor ;to configure the board for 267MHz NOR booting
2938 => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
2939
2940 Signed-off-by: Stefan Roese <[email protected]>
2941
9986bc3e
WD		 2942commit 18135125f909948b85d1d6881ab4ac0efb4a1c58
2943Author: Rodolfo Giometti <[email protected]>
2944Date: Wed Jun 6 10:08:14 2007 +0200
2945
2946 Files include/linux/byteorder/{big,little}_endian.h define
2947 __BIG_ENDIAN and __LITTLE_ENDIAN.
2948
2949 Signed-off-by: Rodolfo Giometti <[email protected]>
2950
2951commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82
2952Author: Zhang Wei <[email protected]>
2953Date: Wed Jun 6 10:08:14 2007 +0200
2954
2955 Add USB PCI-OHCI, USB keyboard and event poll support to the
2956 MPC8641HPCN board config file.
2957
2958 Signed-off-by: Zhang Wei <[email protected]>
2959
2960commit 4dae14ce8fbdf380017dc54f172218e7d2acc889
2961Author: Zhang Wei <[email protected]>
2962Date: Wed Jun 6 10:08:14 2007 +0200
2963
2964 USB PCI-OHCI, interrupt pipe and usb event poll support
2965
2966 This patch added USB PCI-OHCI chips support, interrupt pipe support
2967 and usb event poll support. For supporting the USB interrupt pipe, the
2968 globe urb_priv is moved to purb in ed struct. Now, we can process
2969 several urbs at one time. The interrupt pipe support codes are ported
2970 from Linux kernel 2.4.
2971
2972 Signed-off-by: Zhang Wei <[email protected]>
2973
2974commit fdcfaa1b02268b2899e374b35adf936c911a47eb
2975Author: Zhang Wei <[email protected]>
2976Date: Wed Jun 6 10:08:13 2007 +0200
2977
2978 USB event poll support
2979
2980 This patch adds USB event poll support, which could be used in usbkbd
2981 and other usb devices driver when the asynchronous interrupt
2982 processing is supported.
2983
2984 Signed-off-by: Zhang Wei <[email protected]
2985
2986commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e
2987Author: Rodolfo Giometti <[email protected]>
2988Date: Wed Jun 6 10:08:12 2007 +0200
2989
2990 ISP116x: delay for crappy USB keys
2991
2992 Using some (very) slow USB keys cause the USB host controller buffers
2993 are not ready to be read by the CPU so we need an extra delay before
2994 reading the USB storage data.
2995
2996 Signed-off-by: Rodolfo Giometti <[email protected]>
2997
2998commit 09444143670c9c2243cb7aba9f70b3713d33bed1
2999Author: Markus Klotzbuecher <[email protected]>
3000Date: Wed Jun 6 10:08:12 2007 +0200
3001
3002 Change duplicate usb_cpu_init_fail to usb_board_init_fail
3003
3004 Thanks to Liew Tsi Chung <[email protected]> for pointing
3005 this out.
3006
3007 Signed-off-by: Markus Klotzbuecher <[email protected]>
3008
725671cc
WD		 3009commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
3010Author: Ed Swarthout <[email protected]>
3011Date: Tue Jun 5 12:30:52 2007 -0500
3012
3013 mpc8641 image size cleanup
3014
3015 e600 does not have a bootpg restriction.
3016 Move the version string to beginning of image at fff00000.
3017 Resetvec.S is not needed.
3018 Update flash copy instructions.
3019 Add tftpflash env variable
3020
3021 Signed-off-by: Ed Swarthout <[email protected]>
3022 Signed-off-by: Jon Loeliger <[email protected]>
3023
3024commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
3025Author: Benoît Monin <[email protected]>
3026Date: Mon Jun 4 08:36:05 2007 +0200
3027
3028 [PATCH] Fix ppc4xx bootstrap letter displayed on startup
3029
3030 The attached patch is mainly cosmetic, allowing u-boot to
3031 display the correct bootstrap option letter according to the
3032 datasheets.
3033
3034 The original patch was extended with 405EZ support by Stefan
3035 Roese.
3036
3037 Signed-off-by: Benoit Monin <[email protected]>
3038 Signed-off-by: Stefan Roese <[email protected]>
3039
9986bc3e
WD		 3040commit 5b1313fb2758ffce8b624457f777d8cc6709608d
3041Author: Nikita V. Youshchenko <[email protected]>
3042Date: Wed May 23 12:45:19 2007 +0400
3043
3044 fix compilation problem for mpc8349itx CFG_RAMBOOT
3045
3046 Current include/configs/MPC8349ITX.h does contain some support for building
3047 image that will be started from memory (without putting in into flash).
3048 It could be triggered by building with TEXT_BASE set to a low value.
3049
3050 However, this support is incomplete: using of low TEXT_BASE causes
3051 defining configuration macros in inconsistent way, which later leads
3052 to compilation errors. In particular. flash support is being disabled,
3053 but then flash structures get referenced.
3054
3055 This patch fixes this, making it possible to build with low TEXT_BASE.
3056
3057 Signed-Off-By: Nikita Youshchenko <[email protected]>
3058
3059 Signed-off-by: Kim Phillips <[email protected]>
3060
3061commit 8a364f0970de49949d635e60accf463c6443ef8c
3062Author: Nikita V. Youshchenko <[email protected]>
3063Date: Wed May 23 12:45:25 2007 +0400
3064
3065 add missing 'console' var to default mpc8349itx config
3066
3067 Signed-off-by: Kim Phillips <[email protected]>
3068
725671cc
WD		 3069commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
3070Author: Stefan Roese <[email protected]>
3071Date: Fri Jun 1 16:18:17 2007 +0200
3072
3073 ppc4xx: Add missing file for Bamboo NAND booting support
3074
3075 Signed-off-by: Stefan Roese <[email protected]>
3076
3077commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
3078Author: Stefan Roese <[email protected]>
3079Date: Fri Jun 1 15:58:19 2007 +0200
3080
3081 ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
3082
3083 This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
3084 suggested by AMCC it is not recommended to dynamically change the EBC
3085 speed after bootup. So we undo this change to be on the safe side.
3086
3087 Signed-off-by: Stefan Roese <[email protected]>
3088
3089commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
3090Author: Stefan Roese <[email protected]>
3091Date: Fri Jun 1 15:29:04 2007 +0200
3092
3093 ppc4xx: Update Sequoia NAND booting support with ECC
3094
3095 Signed-off-by: Stefan Roese <[email protected]>
3096
3097commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
3098Author: Stefan Roese <[email protected]>
3099Date: Fri Jun 1 15:27:11 2007 +0200
3100
3101 ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
3102
3103 This patch adds NAND booting support for the AMCC Bamboo eval board.
3104 Since the NAND-SPL boot image is limited to 4kbytes, this version
3105 only supports the onboard 64MBytes of DDR. The DIMM modules can't be
3106 supported, since the setup code for I2C DIMM autodetection and
3107 configuration is too big for this NAND bootloader.
3108
3109 Signed-off-by: Stefan Roese <[email protected]>
3110
3111commit 42be56f53c8b107868e6125c8524ae84293e95a7
3112Author: Stefan Roese <[email protected]>
3113Date: Fri Jun 1 15:23:04 2007 +0200
3114
3115 NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
3116
3117 The U-Boot NAND booting support is now extended to support ECC
3118 upon loading of the NAND U-Boot image.
3119
3120 Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
3121
3122 Signed-off-by: Stefan Roese <[email protected]>
3123
3124commit a471db07fbb65a841ffc9f4f112562b945230f98
3125Author: Stefan Roese <[email protected]>
3126Date: Fri Jun 1 15:19:29 2007 +0200
3127
3128 ppc4xx: Prepare Bamboo port for NAND booting support
3129
3130 This patch updates the "normal" Bamboo NOR booting port, so
3131 that it is compatible with the coming soon NAND booting
3132 Bamboo port.
3133
3134 It also enables the 2nd NAND flash on the Bamboo.
3135
3136 Signed-off-by: Stefan Roese <[email protected]>
3137
3138commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
3139Author: Stefan Roese <[email protected]>
3140Date: Fri Jun 1 15:16:58 2007 +0200
3141
3142 ppc4xx: Update in_be32() functions and friends to latest Linux version
3143
3144 Signed-off-by: Stefan Roese <[email protected]>
3145
3146commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
3147Author: Stefan Roese <[email protected]>
3148Date: Fri Jun 1 15:15:12 2007 +0200
3149
3150 NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
3151
3152 This patch adds hardware ECC support to the NDFC driver. It also
3153 changes the register access from using the "simple" in32/out32
3154 functions to the in_be32/out_be32 functions, which make sure
3155 that the access is correctly synced. This is the only recommended
3156 access to SoC registers in the current Linux kernel.
3157
3158 Signed-off-by: Stefan Roese <[email protected]>
3159
3160commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
3161Author: Stefan Roese <[email protected]>
3162Date: Fri Jun 1 15:12:15 2007 +0200
3163
3164 NAND: Update nand_ecc.c to latest Linux version
3165
3166 This patch updates the nand_ecc code to the latest Linux version.
3167 The main reason for this is the more compact code. This makes
3168 it possible to include the ECC code into the NAND bootloader
3169 image (NAND_SPL) for PPC4xx.
3170
3171 Signed-off-by: Stefan Roese <[email protected]>
3172
3173commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
3174Author: Stefan Roese <[email protected]>
3175Date: Fri Jun 1 15:09:50 2007 +0200
3176
3177 ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
3178
3179 Signed-off-by: Stefan Roese <[email protected]>
3180
3181commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
3182Author: Stefan Roese <[email protected]>
3183Date: Fri Jun 1 13:45:24 2007 +0200
3184
3185 ppc4xx: Change Luan config file to support ECC
3186
3187 With the updated 44x DDR2 driver the Luan board now supports
3188 ECC generation and checking.
3189
3190 Signed-off-by: Stefan Roese <[email protected]>
3191
3192commit 7187db73491c8de0fb56efb5e5134ba5ec443089
3193Author: Stefan Roese <[email protected]>
3194Date: Fri Jun 1 13:45:00 2007 +0200
3195
3196 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
3197
3198 Add config option for 180 degree advance clock control as needed
3199 for the AMCC Luan eval board.
3200
3201 Signed-off-by: Stefan Roese <[email protected]>
3202
3203commit ee1529838abbfaa35f14e3ffbeaaba693159475f
3204Author: Wolfgang Denk <[email protected]>
3205Date: Thu May 31 17:20:09 2007 +0200
3206
3207 Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
3208
3209 Signed-off-by: Wolfgang Denk <[email protected]>
3210
3211commit 7049288fb1f16f1b317140226cdebd07bd416395
3212Author: Bartlomiej Sieka <[email protected]>
3213Date: Sun May 27 17:26:46 2007 +0200
3214
3215 Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
3216
3217 Signed-off-by: Bartlomiej Sieka <[email protected]>
3218
3219commit 4520fd4d2c450da49637216aa0e53739b61c60ac
3220Author: Bartlomiej Sieka <[email protected]>
3221Date: Sun May 27 17:06:36 2007 +0200
3222
3223 Motion-PRO: Add support for redundant environment.
3224
3225 Enable redundant environment, add a MTD partition for it; also add env.
3226 variable command for passing MTD partitions to the kernel command line.
3227
3228 Signed-off-by: Piotr Kruszynski <[email protected]>
3229 Acked-by: Bartlomiej Sieka <[email protected]>
3230
3231commit a26eabeec31746f06d309103690892805696e344
3232Author: Bartlomiej Sieka <[email protected]>
3233Date: Sun May 27 17:05:11 2007 +0200
3234
3235 Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
3236
3237 Allow passing longer command line to the kernel - useful especially
3238 for passing MTD partition layout.
3239
3240 Signed-off-by: Piotr Kruszynski <[email protected]>
3241 Acked-by: Bartlomiej Sieka <[email protected]>
3242
3243commit 9160b96f71483a116de81c68985e8ee306d36764
3244Author: Bartlomiej Sieka <[email protected]>
3245Date: Sun May 27 17:04:18 2007 +0200
3246
3247 Fix: Add missing NULL termination in strings expanded by macros parser.
3248
3249 Signed-off-by: Piotr Kruszynski <[email protected]>
3250 Acked-by: Bartlomiej Sieka <[email protected]>
3251
3252commit 630ec84aef7228fc1dbfb38dec78541403a786cd
3253Author: Bartlomiej Sieka <[email protected]>
3254Date: Sun May 27 17:03:37 2007 +0200
3255
3256 Motion-PRO: Update EEPROM's page write bits and write delay.
3257
3258 Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
3259 have a page write capability of two bytes", and "This device offers fast (1ms)
3260 byte write". Add 3ms of extra delay.
3261
3262 Signed-off-by: Piotr Kruszynski <[email protected]>
3263 Acked-by: Bartlomiej Sieka <[email protected]>
3264
3265commit c00125e07c1ebc125bab40e1e18bceed8be0c162
3266Author: Bartlomiej Sieka <[email protected]>
3267Date: Sun May 27 16:58:45 2007 +0200
3268
3269 MPC5XXX, Motion-PRO: Fix PHY initialization problem.
3270
3271 After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
3272 networking does not function. This commit switches PHY to TX mode by clearing
3273 the FX_SEL bit of Mode Control Register. It also reverses commit
3274 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
3275
3276 Signed-off-by: Grzegorz Bernacki <[email protected]>
3277 Acked-by: Bartlomiej Sieka <[email protected]>
3278
3279commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
3280Author: Bartlomiej Sieka <[email protected]>
3281Date: Sun May 27 16:57:15 2007 +0200
3282
3283 Motion-PRO: Add support for the temperature sensor.
3284
3285 Signed-off-by: Piotr Kruszynski <[email protected]>
3286 Acked-by: Bartlomiej Sieka <[email protected]>
3287
3288commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
3289Author: Bartlomiej Sieka <[email protected]>
3290Date: Sun May 27 16:55:23 2007 +0200
3291
3292 Motion-PRO: Add displaying of CPLD revision information during boot.
3293
3294 Signed-off-by: Jan Wrobel <[email protected]>
3295 Acked-by: Bartlomiej Sieka <[email protected]>
3296
3297commit c99512d6bd3973f01ca2fc4896d829b46e68f150
3298Author: Bartlomiej Sieka <[email protected]>
3299Date: Sun May 27 16:53:43 2007 +0200
3300
3301 MPC5xxx: Change names of defines related to IPB and PCI clocks.
3302
3303 Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
3304 them does not cause PCI or IPB clocks to run at the specified speed.
3305 Instead, they configure divisors used to calculate said clocks. This
3306 patch renames the defines according to their real function.
3307
3308 Signed-off-by: Grzegorz Bernacki <[email protected]>
3309 Acked-by: Bartlomiej Sieka <[email protected]>
3310
3311commit a11c0b85dc3664bb3c1e781137118730c8f619ab
3312Author: Bartlomiej Sieka <[email protected]>
3313Date: Sun May 27 16:51:48 2007 +0200
3314
3315 Motion-PRO: Add LED support.
3316
3317 Signed-off-by: Jan Wrobel <[email protected]>
3318 Signed-off-by: Marian Balakowicz <[email protected]>
3319 Acked-by: Bartlomiej Sieka <[email protected]>
3320
3321commit d756894722c888d09a9fa1df8323753772d3dcce
3322Author: Stefan Roese <[email protected]>
3323Date: Thu May 24 09:49:00 2007 +0200
3324
3325 ppc4xx: Fix small 405EZ OCM initilization bug in start.S
3326
3327 As pointed out by Bruce Adler <[email protected]> this patch
3328 fixes a small bug in the 405EZ OCM initialization. Thanks for
3329 spotting.
3330
3331 Signed-off-by: Stefan Roese <[email protected]>
3332
3333commit 5d4a179013d59a76446462e1eb0a969fba63eb81
3334Author: Stefan Roese <[email protected]>
3335Date: Thu May 24 08:22:09 2007 +0200
3336
3337 ppc4xx: Update AMCC Acadia support for board revision 1.1
3338
3339 This patch updates the Acadia (405EZ) support for the new 1.1 board
3340 revision. It also adds support for NAND FLASH via the 4xx NDFC.
3341
3342 Please note that the jumper J7 must be in position 2-3 for this
3343 NAND support. Position 1-2 is for NAND booting only. NAND booting
3344 support will follow later.
3345
3346 Signed-off-by: Stefan Roese <[email protected]>
3347
4ef218f6
WD		 3348commit 822d55365bb557e084d0e33625a6dedcc866110b
3349Author: Jon Loeliger <[email protected]>
3350Date: Wed May 23 14:09:46 2007 -0500
3351
3352 Add LIST_86xx MAKEALL target for PowerPC builds.
3353
3354 Signed-off-by: Jon Loeliger <[email protected]>
3355
725671cc
WD		 3356commit 9f0077abd69f7a7c756a915b961037302be3e6f2
3357Author: Stefan Roese <[email protected]>
3358Date: Tue May 22 12:48:09 2007 +0200
3359
3360 ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
3361
3362 Signed-off-by: Stefan Roese <[email protected]>
3363
3364commit 6f3dfc139a838b0841c151efe00ad47db2366e79
3365Author: Stefan Roese <[email protected]>
3366Date: Tue May 22 12:46:10 2007 +0200
3367
3368 ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
3369
3370 This patch adds support for 405 PPC's to the 4xx NAND driver
3371 ndfc.c. This is in preparation for the new AMCC 405EZ.
3372
3373 Signed-off-by: Stefan Roese <[email protected]>
3374
3375commit 10603d76767426be803dadd4fb688b97eb69481c
3376Author: Stefan Roese <[email protected]>
3377Date: Mon May 21 07:41:22 2007 +0200
3378
3379 ppc4xx: Fix problem in 405EZ OCM initialization
3380
3381 As spotted by Bruce Adler this patch fixes an initialization problem
3382 for the 405EZ OCM.
3383
3384 Signed-off-by: Stefan Roese <[email protected]>
3385
3386commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
3387Author: Peter Pearse <[email protected]>
3388Date: Fri May 18 16:47:03 2007 +0100
3389
3390 Reduce line lengths to 80 characters max.
3391
3392commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
3393Author: Peter Pearse <[email protected]>
3394Date: Fri May 18 14:34:07 2007 +0100
3395
3396 Makefile permissions
3397
3398commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
3399Author: Peter Pearse <[email protected]>
3400Date: Fri May 18 14:33:11 2007 +0100
3401
3402 Makefile permissions
3403
4ef218f6
WD		 3404commit 255a3577c848706441daee0174543efe205a77f8
3405Author: Kim Phillips <[email protected]>
3406Date: Wed May 16 16:52:19 2007 -0500
3407
3408 Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
3409
3410 For all practical u-boot purposes, TSECs don't differ throughout the
3411 mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
3412
3413 Signed-off-by: Kim Phillips <[email protected]>
3414
725671cc
WD		 3415commit 70124c2602ae2d4c5d3dba05b482d91548242de8
3416Author: Stefano Babic <[email protected]>
3417Date: Wed May 16 14:49:12 2007 +0200
3418
3419 Fix compile problem cause my Microblaze merge
3420
3421 Signed-off-by: Stefano Babic <[email protected]>
3422
3423commit ada4697d0230d6da552867777f98a67ec3ba2579
3424Author: Jeffrey Mann <[email protected]>
3425Date: Wed May 16 13:23:10 2007 +0200
3426
3427 [PATCH] Run new sequoia boards with an EBC speed of 83MHz
3428
3429 Because the Sequoia board does not boot with an EBC faster than 66MHz,
3430 the clock divider are changed after the initial boot process.
3431
3432 This allows for maximum clocking speeds to be achieved on newer boards.
3433 Sequoia boards with 666.66 MHz processors require that the EBC divider
3434 be set to 3 in order to start the initial boot process at a slower EBC
3435 speed. After the initial boot process, the divider can be set back to 2,
3436 which will cause the boards to run at 83.333MHz. This is backward
3437 compatible with boards with 533.33 MHz processors, as these boards will
3438 already be set with an EBC divider of 2.
3439
3440 Signed-off-by: Jeffrey Mann <[email protected]>
3441
3442commit a7676ea7732f3c596805079fed7e5c9fac652cfc
3443Author: Wolfgang Denk <[email protected]>
3444Date: Wed May 16 01:16:53 2007 +0200
3445
3446 Minor Coding Style cleanup, update CHANGELOG.
3447
3448 Signed-off-by: Wolfgang Denk <[email protected]>
3449
a7676ea7
WD		 3450commit d62f64cc23a940eafe712c776b3249e4160753d1
3451Author: Wolfgang Denk <[email protected]>
3452Date: Wed May 16 00:13:33 2007 +0200
3453
3454 Coding Style Cleanup, new CHANGELOG
3455
4ef218f6
WD		 3456commit 3162eb836903c8b247fdc7470dd39bfa6996f495
3457Author: Wolfgang Denk <[email protected]>
3458Date: Tue May 15 23:38:05 2007 +0200
3459
3460 Minor coding style cleanup.
3461
3462commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
3463Author: mushtaq khan <[email protected]>
3464Date: Fri Apr 20 14:23:02 2007 +0530
3465
3466 Add driver for S-ATA-controller on Intel processors with South
3467 Bridge, ICH-5, ICH-6 and ICH-7.
3468
3469 Implementation:
3470
3471 1. Code is divided in to two files. All functions, which are
3472 controller specific are kept in "drivers/ata_piix.c" file and
3473 functions, which are not controller specific, are kept in
3474 "common/cmd_sata.c" file.
3475
3476 2. Reading and Writing from the S-ATA drive is done using PIO method.
3477
3478 3. Driver can be configured for 48-bit addressing by defining macro
3479 CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
3480 addressing.
3481
3482 4. S-ATA read function is hooked to the File system, commands like
3483 ext2ls and ext2load file can be used. This has been tested.
3484
3485 5. U-Boot command "SATA_init" is added, which initializes the S-ATA
3486 controller and identifies the S-ATA drives connected to it.
3487
3488 6. U-Boot command "sata" is added, which is used to read/write, print
3489 partition table and get info about the drives present. This I have
3490 implemented in same way as "ide" command is implemented in U-Boot.
3491
3492 7. This driver is for S-ATA in native mode.
3493
3494 8. This driver does not support the Native command queuing and
3495 Hot-plugging.
3496
3497 Signed-off-by: Mushtaq Khan <[email protected]>
3498
3499commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
3500Author: mushtaq khan <[email protected]>
3501Date: Mon Apr 30 15:57:22 2007 +0530
3502
3503 Fixes bug clearing the bss section for i386
3504
3505 Hi,
3506 There is a bug in the code of clearing the bss section for processor
3507 i386.(File: cpu/i386/start.S)
3508 In the code, bss_start addr (starting addr of bss section) is put into
3509 the register %eax, but the code which clears the bss section refers to
3510 the addr pointed by %edi.
3511
3512 This patch fixes this bug by putting bss_start into %edi register.
3513
3514 Signed-off-by: Mushtaq Khan <[email protected]>
3515
3516commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
3517Author: Joe Hamman <[email protected]>
3518Date: Mon Apr 30 16:47:28 2007 -0500
3519
3520 Add support for BCM5464 Quad Phy
3521
3522 Added support for Broadcom's BCM5464 Quad Phy
3523
3524 Signed-off-by: Joe Hamman <[email protected]>
3525
3526commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
3527Author: Zang Roy-r61911 <[email protected]>
3528Date: Wed May 9 08:10:57 2007 +0800
3529
3530 Search the exception table with linear algorithm
3531
3532 Search the exception table with linear algorithm instead of
3533 bisecting algorithm.
3534 Because the exception table might be unsorted.
3535
3536 Signed-off-by: Roy Zang <[email protected]>
3537
3538commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
3539Author: Aubrey.Li <[email protected]>
3540Date: Mon May 14 11:47:35 2007 +0800
3541
3542 Fix compilation issues on MACOSX
3543
3544 Singed-off-by: Marc Hoffman <[email protected]>
3545 Signed-off-by: Aubrey Li <[email protected]>
3546
3547commit 56fd7162985c412317bbf763a225fba23c64fd31
3548Author: Stephen Williams <[email protected]>
3549Date: Tue May 15 07:55:42 2007 -0700
3550
3551 Fix for compile of JSE target
3552
3553 The attached patch fixes the compile of the JSE board in the
3554 denx git as of 14 may 2007. It is an extremely simple patch,
3555 it just adds the missing define of CFG_SYSTEMACE_WIDTH.
3556
3557 Fix to compile JSE against 20070514 git of u-boot
3558
725671cc
WD		 3559commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
3560Author: Stefan Roese <[email protected]>
3561Date: Fri May 11 12:01:49 2007 +0200
3562
3563 ppc4xx: Add mtcpr/mfcpr access macros
3564
3565 Signed-off-by: Stefan Roese <[email protected]>
3566
3567commit 343c48bd84606c4025c8a7c7263fda465d6e284c
3568Author: Stefan Roese <[email protected]>
3569Date: Fri May 11 12:01:06 2007 +0200
3570
3571 ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
3572
3573 Signed-off-by: Stefan Roese <[email protected]>
3574
d62f64cc
WD		 3575commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
3576Author: Piotr Kruszynski <[email protected]>
3577Date: Thu May 10 16:55:52 2007 +0200
3578
3579 [Motion-PRO] Add MTD and JFFS2 support, also add default partition
3580 definition.
3581
725671cc
WD		 3582commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
3583Author: Peter Pearse <[email protected]>
3584Date: Wed May 9 11:42:44 2007 +0100
3585
3586 Add the board directory for SMN42
3587
3588commit 160131bf965785419626df6c388729fe0b597992
3589Author: Peter Pearse <[email protected]>
3590Date: Wed May 9 11:41:58 2007 +0100
3591
3592 Add the files for the SMN42 board
3593
3594commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
3595Author: Peter Pearse <[email protected]>
3596Date: Wed May 9 11:40:34 2007 +0100
3597
3598 Remove the deleted files for the SMN42 patch
3599
3600commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
3601Author: Peter Pearse <[email protected]>
3602Date: Wed May 9 11:37:56 2007 +0100
3603
3604 New board SMN42 branch
3605
3606commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
3607Author: Peter Pearse <[email protected]>
3608Date: Wed May 9 10:24:38 2007 +0100
3609
3610 Makefile permissions
3611
3612commit b84289b595731e8851df46e893845cc1322c9b9b
3613Author: Ed Swarthout <[email protected]>
3614Date: Tue May 8 14:17:07 2007 -0500
3615
3616 8641hpcn: Fix Makefile after moving pixis to board/freescale.
3617
3618 The OBJTREE != SRCTREE build scenario was broken.
3619 This fixes it.
3620
3621 Signed-off-by: Ed Swarthout <[email protected]>
3622 Signed-off-by: Jon Loeliger <[email protected]>
3623
d62f64cc
WD		 3624commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
3625Author: Michal Simek <[email protected]>
3626Date: Tue May 8 15:57:43 2007 +0200
3627
3628 add: reading special purpose registers
3629
3630commit 1a50f164beb065f360fbddb76029607d6b099698
3631Author: Michal Simek <[email protected]>
3632Date: Tue May 8 14:52:52 2007 +0200
3633
3634 add: Microblaze V5 exception handling
3635
3636commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
3637Author: Michal Simek <[email protected]>
3638Date: Tue May 8 14:39:11 2007 +0200
3639
3640 add: FSL control read and write
3641
3642commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
3643Author: Piotr Kruszynski <[email protected]>
3644Date: Tue May 8 13:05:44 2007 +0200
3645
3646 [Motion-PRO] Add support for I2C, EEPROM and RTC.
3647
3648commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
3649Author: Bartlomiej Sieka <[email protected]>
3650Date: Tue May 8 10:23:56 2007 +0200
3651
3652 [Motion-PRO] Add ATA support. Add CF-booting commands to the default
3653 environment.
3654
3655commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
3656Author: Bartlomiej Sieka <[email protected]>
3657Date: Tue May 8 09:39:12 2007 +0200
3658
3659 [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
3660 eliminates networking problems in Linux (timeouts).
3661
3662commit 1f1369c34b629be94702684d41d3fddf0f6193e7
3663Author: Bartlomiej Sieka <[email protected]>
3664Date: Tue May 8 09:21:57 2007 +0200
3665
3666 [Motion-PRO] Enable Flat Device Tree support and modify default environment
3667 to allow booting of FDT-expecting kernels.
3668
3669commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
3670Author: Michal Simek <[email protected]>
3671Date: Mon May 7 23:58:31 2007 +0200
3672
3673 new: USE_MSR_INTR support
3674
3675commit 008861a2f3ef2c062744d733787c7e530a1b8761
3676Author: Bartlomiej Sieka <[email protected]>
3677Date: Mon May 7 22:36:15 2007 +0200
3678
3679 [MPC5xxx] There are networking problems on the Motion-PRO board with
3680 current PHY initalization code (tftp timeouts all the time). This commit
3681 temporarily disables PHY initalization sequence to make the networking
3682 operational, until a fix is found.
3683
3684commit abca901869c3760b6c5fecb825db6c1d91a78a93
3685Author: Wolfgang Denk <[email protected]>
3686Date: Mon May 7 22:10:36 2007 +0200
3687
3688 Get rid of duplicated file (see include/configs/sbc8560.h instead)
3689
3690 Signed-off-by: Wolfgang Denk <[email protected]>
3691
3692commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
3693Author: Wolfgang Denk <[email protected]>
3694Date: Mon May 7 22:07:08 2007 +0200
3695
3696 Get rid of duplicated file (see doc/README.SBC8560 instead)
3697
3698 Signed-off-by: Wolfgang Denk <[email protected]>
3699
3700commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
3701Author: Michal Simek <[email protected]>
3702Date: Mon May 7 19:43:10 2007 +0200
3703
3704 fix: read and write MSR - repair number of parameters
3705
725671cc
WD		 3706commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
3707Author: Jeffrey Mann <[email protected]>
3708Date: Mon May 7 19:42:49 2007 +0200
3709
3710 [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
3711
3712 A '3' got cut off in the formatting of the last patch to automatically
3713 change the clock speed of the system clock on sequoia board.
3714
3715 Signed-off-by: Jeffrey Mann <[email protected]>
3716 Signed-off-by: Stefan Roese <[email protected]>
3717
d62f64cc
WD		 3718commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
3719Author: Michal Simek <[email protected]>
3720Date: Mon May 7 19:33:51 2007 +0200
3721
3722 new: fsl interrupt support
3723 FSL_Has_data is connected to INTC.
3724
3725commit 792032baa7d625e34c981ab6df521911bd8dc861
3726Author: Michal Simek <[email protected]>
3727Date: Mon May 7 19:30:12 2007 +0200
3728
3729 fix: interrupt handler
3730 remove asm code
3731
3732commit f3f001a341ef185d0f13841be5b5dc3395aacc31
3733Author: Michal Simek <[email protected]>
3734Date: Mon May 7 19:25:08 2007 +0200
3735
3736 fix: remove asm code
3737
3738commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
3739Author: Michal Simek <[email protected]>
3740Date: Mon May 7 19:12:43 2007 +0200
3741
3742 fix: clean interrupt
3743
3744commit 42efed6130c8fcf7da881385b5427065d2801757
3745Author: Michal Simek <[email protected]>
3746Date: Mon May 7 17:22:25 2007 +0200
3747
3748 fix: interrupt handler for multiple sources
3749
3750commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
3751Author: Michal Simek <[email protected]>
3752Date: Mon May 7 17:11:09 2007 +0200
3753
3754 new: add writing to msr register
3755
9986bc3e
WD		 3756commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2
3757Author: Markus Klotzbuecher <[email protected]>
3758Date: Mon May 7 16:43:56 2007 +0200
3759
3760 Fix an ancient CHANGELOG conflict
3761
d62f64cc
WD		 3762commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
3763Author: Timur Tabi <[email protected]>
3764Date: Sat May 5 08:12:30 2007 +0200
3765
3766 5xxx: write MAC address to mac-address and local-mac-address
3767
3768 Some device trees have a mac-address property, some have local-mac-address,
3769 and some have both. To support all of these device trees, ftp_cpu_setup()
3770 should write the MAC address to mac-address and local-mac-address, if they
3771 exist.
3772
3773 Signed-off-by: Timur Tabi <[email protected]>
3774 Acked-by: Grant Likely <[email protected]>
3775
3776commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
3777Author: Grzegorz Wianecki <[email protected]>
3778Date: Sun Apr 29 14:01:54 2007 +0200
3779
3780 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
3781
3782 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
3783 message. Use PVR to distinguish between the two variants, and print proper CPU
3784 information.
3785
3786 Signed-off-by: Grzegorz Wianecki <[email protected]>
3787 Signed-off-by: Bartlomiej Sieka <[email protected]>
3788 Signed-off-by: Grant Likely <[email protected]>
3789
3790commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
3791Author: Ladislav Michl <[email protected]>
3792Date: Wed Apr 25 16:01:26 2007 +0200
3793
3794 [PATCH] simplify silent console
3795
3796 Signed-off-by: Ladislav Michl <[email protected]>
3797 Acked-by: Stefan Roese <[email protected]>
3798
3799commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
3800Author: Sergei Shtylyov <[email protected]>
3801Date: Mon Apr 23 15:30:39 2007 +0200
3802
3803 [PATCH] Avoid assigning PCI resources from zero address
3804
3805 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
3806 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
3807 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
3808 sentence about "0" being considered an invalid address) -- so, use a reasonable
3809 starting value of 0x1000 (that's what the most Linux archs are using).
3810
3811 Alternatively, one might have fixed the calls to pci_set_region() individually
3812 (some code even seems to have taken care of this issue) but that would have
3813 been a lot more work. :-)
3814
3815 Signed-off-by: Sergei Shtylyov <[email protected]>
3816 Acked-by: Stefan Roese <[email protected]>
3817
3818commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
3819Author: Jeffrey Mann <[email protected]>
3820Date: Mon Apr 23 14:00:11 2007 +0200
3821
3822 [patch] setenv(...) can delete environmentalvariables
3823
3824 update setenv() function so that entering a NULL value for the
3825 variable's value will delete the environmental variable
3826
3827 Signed-off-by: Jeffrey Mann <[email protected]>
3828 Acked-by: Stefan Roese <[email protected]>
3829
3830commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
3831Author: Mike Frysinger <[email protected]>
3832Date: Mon Apr 23 13:54:24 2007 +0200
3833
3834 [patch] use unsigned char in smc91111 driver for mac
3835
3836 the v_mac variable in the smc91111 driver is declared as a signed char ...
3837 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
3838 because when it gets printed out, you get a display like:
3839 0xFFFFFFE0 and that's no good
3840
3841 Signed-off-by: Mike Frysinger <[email protected]>
3842
3843commit ffc50f9bb194343c6303517a517708457a5eb6b8
3844Author: Michal Simek <[email protected]>
3845Date: Sat May 5 18:54:42 2007 +0200
3846
3847 new: FSL and MSR support #2
3848
3849commit f7e2e0eb0668136305f78bb9c21be79b48a34247
3850Author: Michal Simek <[email protected]>
3851Date: Sat May 5 18:27:16 2007 +0200
3852
3853 new: FSL and MSR support
3854
3855commit 2f15278c2eb911c668b4fe562130b78cf554d139
3856Author: Wolfgang Denk <[email protected]>
3857Date: Sat May 5 18:23:11 2007 +0200
3858
3859 Coding stylke cleanup; update CHANGELOG.
3860
3861 Signed-off-by: Wolfgang Denk <[email protected]>
3862
2f15278c
WD		 3863commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
3864Author: Wolfgang Denk <[email protected]>
3865Date: Sat May 5 18:05:02 2007 +0200
3866
3867 Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
3868
3869 Signed-off-by: Wolfgang Denk <[email protected]>
3870
885ec89b
WD		 3871commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
3872Author: Wolfgang Denk <[email protected]>
3873Date: Sat May 5 17:15:50 2007 +0200
3874
3875 Make "file" command happy with some config.mk files; update CHANGELOG
3876
2f15278c
WD		 3877commit e3b8c78bc2489c27ae020986ef0eaca684866cef
3878Author: Jeffrey Mann <[email protected]>
3879Date: Sat May 5 08:32:14 2007 +0200
3880
3881 ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
3882
3883 The AMCC Secquoia board has been changed in a new revision from using a
3884 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
3885 indicates the difference. This patch reads that bit and uses the correct
3886 clock speed for the board. This code is backward compatable will all
3887 prior boards. All prior boards will be read as 33.000.
3888
3889 Signed-off-by: Jeffrey Mann <[email protected]>
3890 Signed-off-by: Stefan Roese <[email protected]>
3891
3892commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
3893Author: Stefan Roese <[email protected]>
3894Date: Sat May 5 08:29:01 2007 +0200
3895
3896 ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
3897
3898 Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
3899 for the 4k NAND boot image so define bus_frequency to 133MHz here
3900 which is save for the refresh counter setup.
3901
3902 Signed-off-by: Stefan Roese <[email protected]>
3903
4ef218f6
WD		 3904commit 2f550ab976405300f5b07bf2890800840d0aa05f
3905Author: Timur Tabi <[email protected]>
3906Date: Sat May 5 08:12:30 2007 +0200
3907
3908 5xxx: write MAC address to mac-address and local-mac-address
3909
3910 Some device trees have a mac-address property, some have local-mac-address,
3911 and some have both. To support all of these device trees, ftp_cpu_setup()
3912 should write the MAC address to mac-address and local-mac-address, if they
3913 exist.
3914
3915 Signed-off-by: Timur Tabi <[email protected]>
3916 Acked-by: Grant Likely <[email protected]>
3917
5499645b
WD		 3918commit a79886590593ba1d667c840caa4940c61639f18f
3919Author: Thomas Knobloch <[email protected]>
3920Date: Sat May 5 07:04:42 2007 +0200
3921
3922 NAND: Wrong calculation of page number in nand_block_bad()
3923
3924 In case that there is no memory based bad block table available the
3925 function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
3926 nand_block_bad() directly. When parameter 'getchip' is set to zero,
3927 nand_block_bad() will not right shift the offset to calculate the
3928 correct page number.
3929
3930 Signed-off-by: Thomas Knobloch <[email protected]>
3931 Signed-off-by: Stefan Roese <[email protected]>
3932
3933commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
3934Author: Wolfgang Denk <[email protected]>
3935Date: Fri May 4 10:02:33 2007 +0200
3936
3937 Fix initrd length corruption in bootm command.
3938
3939 When using FDT Images, the length of an inital ramdisk was
3940 overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
3941
3942 Patches by Timur Tabi & Johns Daniel.
3943
3944 Signed-off-by: Wolfgang Denk <[email protected]>
3945
a7676ea7
WD		 3946commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
3947Author: Kim Phillips <[email protected]>
3948Date: Thu May 3 19:43:52 2007 -0500
3949
3950 mpc83xx: fix trivial error in MAKEALL
3951
3952 Signed-off-by: Kim Phillips <[email protected]>
3953
5499645b
WD		 3954commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
3955Author: Wolfgang Denk <[email protected]>
3956Date: Thu May 3 16:34:41 2007 +0200
3957
3958 Update board configuration for STX GP3SSA board:
3959
3960 Enable hush shell, environment in flash rather in EEPROM,
3961 more user-friendly default environment, etc.
3962 The simple EEPROM environment can be selected easily in the board
3963 config file.
3964
3965 Signed-off-by: Wolfgang Denk <[email protected]>
3966
c64a89d6
WD		 3967commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
3968Author: Wolfgang Denk <[email protected]>
3969Date: Tue Apr 24 14:37:49 2007 +0200
3970
3971 Cleanup STX GP3SSA code; fix build and compile problems.
3972
3973commit 35171dc04e028ecacc23ad916a66295472555dbf
3974Author: Dan Malek <[email protected]>
3975Date: Fri Jan 5 09:15:34 2007 +0100
3976
3977 Add support for STX GP3SSA (stxssa) Board
3978
3979 Signed-off-by Dan Malek, <[email protected]>
3980
be5d72d1
WD		 3981commit f2134f8e9eb006bdcd729e89f309c07b2fa45180
3982Author: Haavard Skinnemoen <[email protected]>
3983Date: Wed May 2 13:31:53 2007 +0200
3984
3985 macb: Don't restart autonegotiation if we already have link
3986
3987 Rework macb_phy_init so that it doesn't attempt to re-negotiate if the
3988 link is already up.
3989
3990 Signed-off-by: Haavard Skinnemoen <[email protected]>
3991
3992commit 04fcb5d38bc90779cd9a710d60702075986f0e29
3993Author: Haavard Skinnemoen <[email protected]>
3994Date: Wed May 2 13:22:38 2007 +0200
3995
3996 macb: Introduce a few barriers when dealing with DMA descriptors
3997
3998 There were a few theoretical possibilities that the compiler might
3999 optimize away DMA descriptor reads and/or writes and thus cause
4000 synchronization problems with the hardware. Insert barriers where
4001 we depend on reads/writes actually hitting memory.
4002
4003 Signed-off-by: Haavard Skinnemoen <[email protected]>
4004
885ec89b
WD		 4005commit ffa621a0d12a1ccd81c936c567f8917a213787a8
4006Author: Andy Fleming <[email protected]>
4007Date: Sat Feb 24 01:08:13 2007 -0600
4008
4009 Cleaned up some 85xx PCI bugs
4010
4011 * Cleaned up the CDS PCI Config Tables and added NULL entries to
4012 the end
4013 * Fixed PCIe LAWBAR assignemt to use the cpu-relative address
4014 * Fixed 85xx PCI code to assign powar region sizes based on the
4015 config values (rather than hard-coding them)
4016 * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
4017
4018 Signed-off-by: Andy Fleming <[email protected]>
4019
4020commit 6743105988fc44d5b0d30388c790607835aae7a6
4021Author: Andy Fleming <[email protected]>
4022Date: Mon Apr 23 02:54:25 2007 -0500
4023
4024 Add support for the 8568 MDS board
4025
4026 This included some changes to common files:
4027 * Add 8568 processor SVR to various places
4028 * Add support for setting the qe bus-frequency value in the dts
4029 * Add the 8568MDS target to the Makefile
4030
4031 Signed-off-by: Andy Fleming <[email protected]>
4032
4033commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
4034Author: David Updegraff <[email protected]>
4035Date: Fri Apr 20 14:34:48 2007 -0500
4036
4037 Add support for treating unknown PHYs as generic PHYs.
4038
4039 When bringing up u-boot on new boards, PHY support sometimes gets
4040 neglected. Most PHYs don't really need any special support,
4041 though. By adding a generic entry that always matches if nothing
4042 else does, we can provide support for "unsupported" PHYs for the
4043 tsec.
4044
4045 The generic PHY driver supports most PHYs, including gigabit.
4046
4047 Signed-off-by: David Updegraff <[email protected]>
4048 Signed-off-by: Andy Fleming <[email protected]>
4049
5499645b
WD		 4050commit a75af9bfd8fff0499efdbb90601cec5a2afef117
4051Author: James Yang <[email protected]>
4052Date: Wed Feb 7 15:28:04 2007 -0600
4053
4054 Conditionalize 8641 Rev1.0 MCM workarounds
4055
4056 Signed-off-by: James Yang <[email protected]>
4057 Signed-off-by: Jon Loeliger <[email protected]>
4058
a7676ea7
WD		 4059commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
4060Author: Timur Tabi <[email protected]>
4061Date: Mon Apr 30 13:59:50 2007 -0500
4062
4063 Fix memory initialization on MPC8349E-mITX
4064
4065 Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
4066 This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
4067 on some ITX boards, notably those with a revision 3.1 CPU.
4068
4069 Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
4070 ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
4071
4072 Signed-off-by: Timur Tabi <[email protected]>
4073 Acked-by: Michael Benedict <[email protected]>
4074 Signed-off-by: Kim Phillips <[email protected]>
4075
4076commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
4077Author: Kim Phillips <[email protected]>
4078Date: Mon Apr 30 15:26:21 2007 -0500
4079
4080 mpc83xx: replace elaborate boottime verbosity with 'clocks' command
4081
4082 and fix CPU: to align with Board: display text.
4083
4084 Signed-off-by: Kim Phillips <[email protected]>
4085
5499645b
WD		 4086commit c1ab82669d9525998c34e802a12cad662723f22a
4087Author: James Yang <[email protected]>
4088Date: Fri Mar 16 13:02:53 2007 -0500
4089
4090 Rewrote picos_to_clk() to avoid rounding errors.
4091 Clarified that conversion is to DRAM clocks rather than platform clocks.
4092 Made function static to spd_sdram.c.
4093
4094 Signed-off-by: James Yang <[email protected]>
4095 Signed-off-by: Jon Loeliger <[email protected]>
4096
2f15278c
WD		 4097commit 8b39501d28754e72726ce7fb02310e56dbdf116a
4098Author: Stefan Roese <[email protected]>
4099Date: Sun Apr 29 14:13:01 2007 +0200
4100
4101 ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
4102
4103 Signed-off-by: Stefan Roese <[email protected]>
4104
4ef218f6
WD		 4105commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
4106Author: Grzegorz Wianecki <[email protected]>
4107Date: Sun Apr 29 14:01:54 2007 +0200
4108
4109 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
4110
4111 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
4112 message. Use PVR to distinguish between the two variants, and print proper CPU
4113 information.
4114
4115 Signed-off-by: Grzegorz Wianecki <[email protected]>
4116 Signed-off-by: Bartlomiej Sieka <[email protected]>
4117 Signed-off-by: Grant Likely <[email protected]>
4118
a7676ea7
WD		 4119commit 5c5d3242935cf3543af01142627494434834cf98
4120Author: Kim Phillips <[email protected]>
4121Date: Wed Apr 25 12:34:38 2007 -0500
4122
4123 mpc83xx: minor fixups for 8313rdb introduction
4124
4ef218f6
WD		 4125commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
4126Author: Ladislav Michl <[email protected]>
4127Date: Wed Apr 25 16:01:26 2007 +0200
4128
4129 [PATCH] simplify silent console
4130
4131 Signed-off-by: Ladislav Michl <[email protected]>
4132 Acked-by: Stefan Roese <[email protected]>
4133
d62f64cc
WD		 4134commit 144876a380f5756f57412caf74c1d6dc201dd796
4135Author: Michal Simek <[email protected]>
4136Date: Tue Apr 24 23:01:02 2007 +0200
4137
4138 [PATCH] MTD partition support, JFFS2 support
4139
2f15278c
WD		 4140commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
4141Author: Matthias Fuchs <[email protected]>
4142Date: Tue Apr 24 14:03:45 2007 +0200
4143
4144 ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
4145
4146 Signed-off-by: Matthias Fuchs <[email protected]>
4147
885ec89b
WD		 4148commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
4149Author: Andy Fleming <[email protected]>
4150Date: Mon Apr 23 02:37:47 2007 -0500
4151
4152 Reworked 85xx speed detection code
4153
4154 Changed the code to read the registers and calculate the clock
4155 rates, rather than using a "switch" statement.
4156
4157 Idea from Andrew Klossner <[email protected]>
4158
4159 Signed-off-by: Andy Fleming <[email protected]>
4160
4161commit 81f481ca708ed6a56bf9c410e3191dbad581c565
4162Author: Andy Fleming <[email protected]>
4163Date: Mon Apr 23 02:24:28 2007 -0500
4164
4165 Enable 8544 support
4166
4167 * Add support to the Makefile
4168 * Add 8544 configuration support to the tsec driver
4169 * Add 8544 SVR numbers to processor.h
4170
4171 Signed-off-by: Ed Swarthout <[email protected]>
4172 Signed-off-by: Jon Loeliger <[email protected]>
4173
4174commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
4175Author: Andy Fleming <[email protected]>
4176Date: Fri Feb 23 17:12:25 2007 -0600
4177
4178 Support 1G size on 8548
4179
4180 e500v2 and newer cores support 1G page sizes.
4181
4182 Signed-off-by: Ed Swarthout <[email protected]>
4183 Signed-off-by: Andy Fleming <[email protected]>
4184
4185commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
4186Author: Andy Fleming <[email protected]>
4187Date: Fri Feb 23 17:11:16 2007 -0600
4188
4189 Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
4190
4191 The other pagesz constants use one letter to specify order of
4192 magnitude. Also change the one reference to it in mpc8548cds/init.S
4193
4194 Signed-off-by: Andy Fleming <[email protected]>
4195
4196commit 1f9a318cea14272edd10d63739e2d326c90f430e
4197Author: Andy Fleming <[email protected]>
4198Date: Fri Feb 23 16:28:46 2007 -0600
4199
4200 Only set ddrioovcr for 8548 rev1.
4201
4202 Signed-off-by: Ed Swarthout <[email protected]>
4203 Signed-off-by: Andy Fleming <[email protected]>
4204
4205commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
4206Author: Andy Fleming <[email protected]>
4207Date: Sat Feb 24 01:16:45 2007 -0600
4208
4209 Tweak DDR ECC error counter
4210
4211 Enable single-bit error counter when memory was cleared by ddr controller.
4212
4213 Signed-off-by: Ed Swarthout <[email protected]>
4214 Signed-off-by: Andy Fleming <[email protected]>
4215
4216commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
4217Author: Timur Tabi <[email protected]>
4218Date: Mon Feb 12 13:34:55 2007 -0600
4219
4220 85xx: write MAC address to mac-address and local-mac-address
4221
4222 Some device trees have a mac-address property, some have local-mac-address,
4223 and some have both. To support all of these device trees, ftp_cpu_setup()
4224 should write the MAC address to mac-address and local-mac-address, if they
4225 exist.
4226
4227 Signed-off-by: Timur Tabi <[email protected]>
4228
4229commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
4230Author: Andy Fleming <[email protected]>
4231Date: Mon Apr 23 01:44:44 2007 -0500
4232
4233 Some 85xx cpu cleanups
4234
4235 * Cleaned up the TSR[WIS] clearing
4236 * Cleaned up DMA initialization
4237
4238 Signed-off-by: Ed Swarthout <[email protected]>
4239 Signed-off-by: Jon Loeliger <[email protected]>
4240 Acked-by: Andy Fleming <[email protected]>
4241
4242commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
4243Author: Andy Fleming <[email protected]>
4244Date: Mon Apr 23 01:32:22 2007 -0500
4245
4246 Add cpu support for the 8544
4247
4248 Recognize new SVR values, and add a few register definitions
4249
4250 Signed-off-by: Ed Swarthout <[email protected]>
4251 Signed-off-by: Jon Loeliger <[email protected]>
4252 Acked-by: Andy Fleming <[email protected]>
4253
4254commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
4255Author: Jon Loeliger <[email protected]>
4256Date: Wed Apr 11 16:51:02 2007 -0500
4257
4258 Add MPC8544DS basic port board files.
4259
4260 Add board port under new board/freescale directory
4261 structure and reuse existing PIXIS FPGA support there.
4262
4263 Signed-off-by: Ed Swarthout <[email protected]>
4264 Signed-off-by: Jon Loeliger <[email protected]>
4265
4266commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
4267Author: Jon Loeliger <[email protected]>
4268Date: Wed Apr 11 16:50:57 2007 -0500
4269
4270 Add MPC8544DS main configuration file.
4271
4272 Signed-off-by: Ed Swarthout <[email protected]>
4273 Signed-off-by: Jon Loeliger <[email protected]>
4274
4275commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
4276Author: Sergei Shtylyov <[email protected]>
4277Date: Wed Dec 27 22:07:15 2006 +0300
4278
4279 Fix PCI I/O space mapping on Freescale MPC85x0ADS
4280
4281 The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
4282 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
4283 describing the local address window used for the PCI I/O space accesses -- fix
4284 this and carry over the necessary changes into the MPC8560ADS code since the
4285 PCI I/O space mapping was also broken for this board (by the earlier commit
4286 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
4287 the PCI I/O space must be mapped to all the MPC85xx board config. headers.
4288
4289 Signed-off-by: Sergei Shtylyov <[email protected]>
4290
4291 board/mpc8540ads/init.S | 4 ++--
4292 board/mpc8560ads/init.S | 4 ++--
4293 include/configs/MPC8540ADS.h | 5 ++---
4294 include/configs/MPC8541CDS.h | 2 +-
4295 include/configs/MPC8548CDS.h | 2 +-
4296 include/configs/MPC8560ADS.h | 8 ++++----
4297 6 files changed, 12 insertions(+), 13 deletions(-)
4298
4299commit 96629cbabdb727d4a5e62542deefc01d498db6dc
4300Author: Zang Roy-r61911 <[email protected]>
4301Date: Tue Dec 5 16:42:30 2006 +0800
4302
4303 u-boot: Fix e500 v2 core reset bug
4304
4305 The following patch fixes the e500 v2 core reset bug.
4306 For e500 v2 core, a new reset control register is added to reset the
4307 processor.
4308
4309 Signed-off-by: Roy Zang <[email protected]>
4310
4311commit 63247a5acd58032e6cf33f525bc3923b467bac88
4312Author: Zang Roy-r61911 <[email protected]>
4313Date: Wed Dec 20 11:01:00 2006 +0800
4314
4315 u-boot: v2: Remove the fixed TLB and LAW entrynubmer
4316
4317 Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
4318 entry number to control the loop. This can reduce the potential risk
4319 for the 85xx processor increasing its TLB adn LAW entry number.
4320
4321 Signed-off-by: Swarthout Edward <[email protected]>
4322 Signed-off-by: Roy Zang <[email protected]>
4323
4324commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
4325Author: Zang Roy-r61911 <[email protected]>
4326Date: Mon Dec 18 17:01:04 2006 +0800
4327
4328 u-boot: Fix the 85xxcds tsec bug
4329
4330 Fix the 85xxcds tsec bug.
4331 When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
4332
4333 Signed-off-by: Roy Zang <[email protected]>
4334
4335commit 7337b237ffc4aaf1b9467024fe472a880d852598
4336Author: Zang Roy-r61911 <[email protected]>
4337Date: Fri Dec 15 14:43:31 2006 +0800
4338
4339 u-boot: Fix CPU2 errata on MPC8548CDS board
4340
4341 This patch apply workaround of CPU2 errata on MPC8548CDS board.
4342
4343 Signed-off-by:Ebony Zhu <[email protected]>
4344
4345commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
4346Author: [email protected] <[email protected]>
4347Date: Mon Dec 18 16:25:15 2006 +0800
4348
4349 u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
4350
4351 This patch disables MPC8548CDS 2T_TIMING for DDR by default.
4352
4353 Signed-off-by:Ebony Zhu <[email protected]>
4354
4355commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
4356Author: Zang Roy-r61911 <[email protected]>
4357Date: Thu Dec 14 14:14:55 2006 +0800
4358
4359 u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
4360
4361 Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
4362 board.
4363 Signed-off-by: Roy Zang <[email protected]>
4364
a7676ea7
WD		 4365commit 96b8a05432f346f36493535c85320b70ec9c7c1b
4366Author: Scott Wood <[email protected]>
4367Date: Mon Apr 16 14:54:15 2007 -0500
4368
4369 mpc83xx: Add MPC8313ERDB support.
4370
4371 Signed-off-by: Scott Wood <[email protected]>
4372
4373commit 49ea3b6eafe606285ae4d5c378026153dde53200
4374Author: Scott Wood <[email protected]>
4375Date: Mon Apr 16 14:34:21 2007 -0500
4376
4377 mpc83xx: Add generic PCI setup code.
4378
4379 Board code can now request the generic setup code rather than having to
4380 copy-and-paste it for themselves. Boards should be converted to use this
4381 once they're tested with it.
4382
4383 Signed-off-by: Scott Wood <[email protected]>
4384
4385commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
4386Author: Scott Wood <[email protected]>
4387Date: Mon Apr 16 14:34:19 2007 -0500
4388
4389 mpc83xx: Add 831x support to speed.c.
4390
4391 Signed-off-by: Scott Wood <[email protected]>
4392
4393commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
4394Author: Scott Wood <[email protected]>
4395Date: Mon Apr 16 14:34:18 2007 -0500
4396
4397 mpc83xx: Add 831x support to global_data.h
4398
4399 Signed-off-by: Scott Wood <[email protected]>
4400
4401commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
4402Author: Scott Wood <[email protected]>
4403Date: Mon Apr 16 14:34:16 2007 -0500
4404
4405 mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
4406
4407 Rather than misleadingly define PVR_83xx as the specific type of 83xx
4408 being built for, the PVR of each core revision is defined. checkcpu() now
4409 prints the core that it detects, rather than aborting if it doesn't find
4410 what it thinks it wants.
4411
4412 Signed-off-by: Scott Wood <[email protected]>
4413
4414commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
4415Author: Scott Wood <[email protected]>
4416Date: Mon Apr 16 14:34:15 2007 -0500
4417
4418 mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
4419
4420 Signed-off-by: Scott Wood <[email protected]>
4421
4422commit d87c57b201b4572d16f1b642998faa00c9912b16
4423Author: Scott Wood <[email protected]>
4424Date: Mon Apr 16 14:31:55 2007 -0500
4425
4426 mpc83xx: Add register definitions for MPC831x.
4427
4428 Signed-off-by: Scott Wood <[email protected]>
4429
4ef218f6
WD		 4430commit 7fc4c71a143be8666d70803fb25ae60379c95622
4431Author: Stefan Roese <[email protected]>
4432Date: Mon Apr 23 15:39:59 2007 +0200
4433
4434 Fix file mode
4435
4436 Signed-off-by: Stefan Roese <[email protected]>
4437
4438commit 38257988abfe74d459ca2ad748b109ca04e4efe1
4439Author: Sergei Shtylyov <[email protected]>
4440Date: Mon Apr 23 15:30:39 2007 +0200
4441
4442 [PATCH] Avoid assigning PCI resources from zero address
4443
4444 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
4445 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
4446 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
4447 sentence about "0" being considered an invalid address) -- so, use a reasonable
4448 starting value of 0x1000 (that's what the most Linux archs are using).
4449
4450 Alternatively, one might have fixed the calls to pci_set_region() individually
4451 (some code even seems to have taken care of this issue) but that would have
4452 been a lot more work. :-)
4453
4454 Signed-off-by: Sergei Shtylyov <[email protected]>
4455 Acked-by: Stefan Roese <[email protected]>
4456
4457commit afb903a2eb9436baa9270ccc0c27082d86497d89
4458Author: Jeffrey Mann <[email protected]>
4459Date: Mon Apr 23 14:00:11 2007 +0200
4460
4461 [patch] setenv(...) can delete environmentalvariables
4462
4463 update setenv() function so that entering a NULL value for the
4464 variable's value will delete the environmental variable
4465
4466 Signed-off-by: Jeffrey Mann <[email protected]>
4467 Acked-by: Stefan Roese <[email protected]>
4468
4469commit 36f104e5caa747d568eff26b369565af57c2ffa6
4470Author: Mike Frysinger <[email protected]>
4471Date: Mon Apr 23 13:54:24 2007 +0200
4472
4473 [patch] use unsigned char in smc91111 driver for mac
4474
4475 the v_mac variable in the smc91111 driver is declared as a signed char ...
4476 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
4477 because when it gets printed out, you get a display like:
4478 0xFFFFFFE0 and that's no good
4479
4480 Signed-off-by: Mike Frysinger <[email protected]>
4481
9986bc3e
WD		 4482commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459
4483Author: Rodolfo Giometti <[email protected]>
4484Date: Mon Apr 23 13:10:52 2007 +0200
4485
4486 USB: (Another) delay for crappy USB keys.
4487
4488 Some USB keys are slow in giving back an answer when the Root HUB
4489 enables power lines.
4490
4491 Signed-off-by: Rodolfo Giometti <[email protected]>
4492
5499645b
WD		 4493commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
4494Author: Stefan Roese <[email protected]>
4495Date: Mon Apr 23 12:00:22 2007 +0200
4496
4497 Remove BOARDLIBS usage completely
4498
4499 Signed-off-by: Stefan Roese <[email protected]>
4500
d62f64cc
WD		 4501commit 32556443840f127170e4baa8bdd5b567039f6c36
4502Author: Michal Simek <[email protected]>
4503Date: Sat Apr 21 21:07:22 2007 +0200
4504
4505 [PATCH] SystemACE support for Microblaze
4506
4507commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
4508Author: Michal Simek <[email protected]>
4509Date: Sat Apr 21 21:02:40 2007 +0200
4510
4511 16bit read/write little endian
4512
4513commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
4514Author: Michal Simek <[email protected]>
4515Date: Sat Apr 21 20:53:31 2007 +0200
4516
4517 Change ML401 parameters - Xilinx BSP
4518
5499645b
WD		 4519commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
4520Author: Ed Swarthout <[email protected]>
4521Date: Wed Feb 28 05:37:29 2007 -0600
4522
4523 mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
4524
4525 Signed-off-by: Ed Swarthout <[email protected]>
4526
4527commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
4528Author: Zhang Wei <[email protected]>
4529Date: Fri Jan 19 10:42:37 2007 +0800
4530
4531 Enable LAWs for MPC8641 PCI-Ex2.
4532
4533 Signed-off-by: Zhang Wei <[email protected]>
4534 Signed-off-by: Jon Loeliger <[email protected]>
4535
4536commit bd7851ce1e1f140665b520026abf1042968b1102
4537Author: Jon Loeliger <[email protected]>
4538Date: Fri Apr 20 14:12:26 2007 -0500
4539
4540 mpc86xx; Write MAC address to mac-address and local-mac-address
4541
4542 Some device trees have a mac-address property, some have local-mac-address,
4543 and some have both. To support all of these device trees, ftp_cpu_setup()
4544 should write the MAC address to mac-address and local-mac-address, if they
4545 exist.
4546
4547 Signed-off-by: Timur Tabi <[email protected]>
4548 Signed-off-by: Jon Loeliger <[email protected]>
4549
4550commit 7dbdf28b8bd855a8530dc3292e4982575a197060
4551Author: Jon Loeliger <[email protected]>
4552Date: Fri Apr 20 14:11:38 2007 -0500
4553
4554 mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
4555
4556 Signed-off-by: Kim Phillips <[email protected]>
4557 Signed-off-by: Jon Loeliger <[email protected]>
4558
c64a89d6
WD		 4559commit 14da5f7675bbb427c469e3f45006e027b6e21db9
4560Author: Wolfgang Denk <[email protected]>
4561Date: Fri Apr 20 17:43:28 2007 +0200
4562
4563 Cleanup compiler warnings, update CHANGELOG
4564
4565 Signed-off-by: Wolfgang Denk <[email protected]>
4566
14da5f76
WD		 4567commit 6923565db12af34fd5e02d354ee65a8c78ac460f
4568Author: Detlev Zundel <[email protected]>
4569Date: Fri Apr 20 12:01:47 2007 +0200
4570
4571 Fix breakage of NC650 board with respect to nand support.
4572
4573 Signed-off-by: Detlev Zundel <[email protected]>
4574
4575commit 39f23cd90947639ac278a18ff277ec786b5ac167
4576Author: Domen Puncer <[email protected]>
4577Date: Fri Apr 20 11:13:16 2007 +0200
4578
4579 [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
4580
4581 G2 core reference manual says decrementer and time base
4582 are decreasing/increasing once every 4 bus clock cycles.
4583 Lets fix it, so time in Linux won't run twice as fast
4584
4585 Signed-off-by: Domen Puncer <[email protected]>
4586 Acked-by: Grant Likely <[email protected]>
4587
4588commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
4589Author: Gerald Van Baren <[email protected]>
4590Date: Thu Apr 19 23:14:39 2007 -0400
4591
4592 Fix serious pointer bug with bootm and reserve map.
4593
4594 What was suppose to be a stack variable was declared as a pointer,
4595 overwriting random memory.
4596 Also moved the libfdt.a requirement into the main Makefile. That is
4597 The U-Boot Way.
4598
2f15278c
WD		 4599commit d21686263574e95cb3e9e9b0496f968b1b897fdb
4600Author: Stefan Roese <[email protected]>
4601Date: Thu Apr 19 09:53:52 2007 +0200
4602
4603 ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
4604
4605 Previous versions used full wait states for the chip select #1 which
4606 is connected to the Xilinix SystemACE controller on the AMCC Katmai
4607 evaluation board. This leads to really slow access and therefore low
4608 performance. This patch now sets up the chip select a lot faster
4609 resulting in much better read/write performance of the Linux driver.
4610
4611 Signed-off-by: Stefan Roese <[email protected]>
4612
14da5f76
WD		 4613commit 37837828d89084879bee2f2b8c7c68d4695940df
4614Author: Wolfgang Denk <[email protected]>
4615Date: Wed Apr 18 17:49:29 2007 +0200
4616
4617 Clenaup, update CHANGELOG
4618
4619 Signed-off-by: Wolfgang Denk <[email protected]>
4620
37837828
WD		 4621commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
4622Author: Wolfgang Denk <[email protected]>
4623Date: Wed Apr 18 17:20:58 2007 +0200
4624
4625 Update CHANGELOG
4626
4627 Signed-off-by: Wolfgang Denk <[email protected]>
4628
fd094c63
WD		 4629commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
4630Author: Wolfgang Denk <[email protected]>
4631Date: Wed Apr 18 17:07:26 2007 +0200
4632
4633 Cleanup, update CHANGELOG
4634
4635 Sigend-off-by: Wolfgang Denk <[email protected]>
4636
b99c1e6d
WD		 4637commit 5f6c732affea9647762d27a4617a2ae64c52dceb
4638Author: Wolfgang Denk <[email protected]>
4639Date: Wed Apr 18 16:17:46 2007 +0200
4640
4641 Update CHANGELOG
4642
5f6c732a
WD		 4643commit ad4eb555671d97f96dc56eab55103b1f86874b01
4644Author: Wolfgang Denk <[email protected]>
4645Date: Wed Apr 18 14:30:39 2007 +0200
4646
4647 MCC200 board: remove warning which is obsolete after PSoC firmware changes
4648
4649 Signed-off-by: Wolfgang Denk <[email protected]>
4650
4651commit 3747a3f010b2b1442dec3e871c69788b6017aaae
4652Author: Domen Puncer <[email protected]>
4653Date: Wed Apr 18 12:11:05 2007 +0200
4654
4655 [PATCH] icecube/lite5200b: document wakeup from low-power support
4656
4657 Signed-off-by: Domen Puncer <[email protected]>
4658
4659commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
4660Author: Stefan Roese <[email protected]>
4661Date: Wed Apr 18 12:07:47 2007 +0200
4662
4663 ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
4664
4665 Signed-off-by: Stefan Roese <[email protected]>
4666
4667commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
4668Author: Stefan Roese <[email protected]>
4669Date: Wed Apr 18 12:05:59 2007 +0200
4670
4671 ppc4xx: Add output for bootrom location to 405EZ ports
4672
4673 Now 405EZ ports also show upon bootup from which boot device
4674 they are configured to boot:
4675
4676 U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
4677
4678 CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
4679 Bootstrap Option E - Boot ROM Location EBC (32 bits)
4680 16 kB I-Cache 16 kB D-Cache
4681 Board: Acadia - AMCC PPC405EZ Evaluation Board
4682
4683 Signed-off-by: Stefan Roese <[email protected]>
4684
14da5f76
WD		 4685commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
4686Author: Peter Pearse <[email protected]>
4687Date: Tue Apr 17 13:30:33 2007 +0100
4688
4689 Move ppearse to ARM board list
4690 Add Konstantin Kletschke for scb9328.
4691 Signed-off-by: Peter Pearse <[email protected]>
4692
5f6c732a
WD		 4693commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
4694Author: Domen Puncer <[email protected]>
4695Date: Mon Apr 16 14:00:13 2007 +0200
4696
4697 [PATCH] icecube/lite5200b: wakeup from low-power support
4698
4699 U-Boot part of Lite5200b low power mode support.
4700 Puts SDRAM out of self-refresh and transfers control to
4701 address saved at physical 0x0.
4702
4703 Signed-off-by: Domen Puncer <[email protected]>
4704 Acked-by: Grant Likely <[email protected]>
4705
37837828
WD		 4706commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
4707Author: Gerald Van Baren <[email protected]>
4708Date: Sun Apr 15 13:54:26 2007 -0400
4709
4710 Fix the ft_cpu_setup() property settings.
4711
4712 Use "setter" functions instead of flags, cleaner and more flexible.
4713 It also fixes the problem noted by Timur Tabi that the ethernet MAC
4714 addresses were all being set incorrectly to the same MAC address.
4715
4716commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
4717Author: Gerald Van Baren <[email protected]>
4718Date: Sat Apr 14 22:51:24 2007 -0400
4719
4720 Improve the bootm command for CONFIG_OF_LIBFDT
4721
4722 In bootm, create the "/chosen" node only if it doesn't already exist
4723 (better matches the previous behavior).
4724 Update for proper reserved memory map handling for initrd.
4725
4726commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
4727Author: Gerald Van Baren <[email protected]>
4728Date: Sat Apr 14 22:46:41 2007 -0400
4729
4730 Add some utilities to manipulate the reserved memory map.
4731
5f6c732a
WD		 4732commit 8048cdd56f04a756eeea4951f402bf5cc33785db
4733Author: Wolfgang Denk <[email protected]>
4734Date: Sat Apr 14 21:16:54 2007 +0200
4735
4736 Update CHANGELOG
4737
2a26ec47
WD		 4738commit 8e6875183cdca91c134408d119d4abcd48ef6856
4739Author: Haavard Skinnemoen <[email protected]>
4740Date: Sun Dec 17 18:56:46 2006 +0100
4741
4742 AVR32: Enable MMC support
4743
4744 Set up the portmux for the MMC interface and enable the MMC driver
4745 along with support for DOS partitions, ext2 and FAT filesystems.
4746
4747 Signed-off-by: Haavard Skinnemoen <[email protected]>
4748
4749commit fc26c97bb6df41b4a95662c34054fe912387bf38
4750Author: Haavard Skinnemoen <[email protected]>
4751Date: Fri Jan 20 10:03:53 2006 +0100
4752
4753 Atmel MCI driver
4754
4755 Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
4756
4757 The AT91 ARM-based CPUs use basically the same hardware, so it should
4758 be possible to share this driver, but no effort has been made so far.
4759
4760 Hardware documentation can be found in the AT32AP7000 data sheet,
4761 which can be downloaded from
4762
4763 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
4764
4765 Signed-off-by: Haavard Skinnemoen <[email protected]>
4766
4767commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
4768Author: Haavard Skinnemoen <[email protected]>
4769Date: Sun Dec 17 18:55:37 2006 +0100
4770
4771 AVR32: Add clk and gpio infrastructure for mmci
4772
4773 Implement functions for configuring the mmci pins, as well as
4774 functions for getting the clock rate of the mmci controller.
4775
4776 Signed-off-by: Haavard Skinnemoen <[email protected]>
4777
4778commit 7fac3f69e9f05c5e5326681976c35d129324c4de
4779Author: Haavard Skinnemoen <[email protected]>
4780Date: Sun Dec 17 18:53:56 2006 +0100
4781
4782 Enable partition support with MMC
4783
4784 Include implementations of init_part() and get_partition_info() when
4785 CONFIG_MMC is set.
4786
4787 Signed-off-by: Haavard Skinnemoen <[email protected]>
4788
4789commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
4790Author: Haavard Skinnemoen <[email protected]>
4791Date: Sun Dec 17 17:14:30 2006 +0100
4792
4793 AVR32: Enable networking
4794
4795 Implement MACB initialization for AVR32 and ATSTK1000, and turn
4796 everything on, including the MACB driver.
4797
4798 Signed-off-by: Haavard Skinnemoen <[email protected]>
4799
4800commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
4801Author: Haavard Skinnemoen <[email protected]>
4802Date: Fri Jan 20 10:03:34 2006 +0100
4803
4804 Atmel MACB ethernet driver
4805
4806 Driver for the Atmel MACB on-chip ethernet controller.
4807
4808 This driver has been tested on the ATSTK1000 board with a AT32AP7000
4809 CPU. It should probably work on AT91SAM926x as well with some minor
4810 modifications.
4811
4812 Hardware documentation can be found in the AT32AP7000 data sheet,
4813 which can be downloaded from
4814
4815 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
4816
4817 Signed-off-by: Haavard Skinnemoen <[email protected]>
4818
4819commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
4820Author: Haavard Skinnemoen <[email protected]>
4821Date: Sun Dec 17 16:56:14 2006 +0100
4822
4823 AVR32: Add clk and gpio infrastructure for macb0 and macb1
4824
4825 Implement functions for configuring the macb0 and macb1 pins, as
4826 well as functions for getting the clock rate of the various
4827 busses the macb ethernet controllers are connected to.
4828
4829 Signed-off-by: Haavard Skinnemoen <[email protected]>
4830
4831commit d5acb95b16a0a74c643524342c3437e765426d05
4832Author: Haavard Skinnemoen <[email protected]>
4833Date: Sun Dec 17 15:39:15 2006 +0100
4834
4835 AVR32: Implement simple DMA memory allocator
4836
4837 Implement dma_alloc_coherent() which returns cache-aligned
4838 uncacheable memory.
4839
4840 Signed-off-by: Haavard Skinnemoen <[email protected]>
4841
4842commit 91975b0fea773c9e681fea8cf3349669f27685ee
4843Author: Haavard Skinnemoen <[email protected]>
4844Date: Sun Dec 17 15:46:02 2006 +0100
4845
4846 Import <linux/mii.h> from the Linux kernel
4847
4848 Instead of creating yet another set of MII register definitions
4849 in the macb driver, here's a complete set of definitions for everyone
4850 to use.
4851
4852 Signed-off-by: Haavard Skinnemoen <[email protected]>
4853
4854commit 1b804b229556a4d862da93c0ec94e79419364b2c
4855Author: Haavard Skinnemoen <[email protected]>
4856Date: Wed Mar 21 19:47:36 2007 +0100
4857
4858 AVR32: Include more commands for ATSTK1000
4859
4860 Include the imi, imls and jffs commands sets by default on ATSTK1000.
4861 Also define CONFIG_BOOTARGS to something more useful, define
4862 CONFIG_BOOTCOMMAND and enable autoboot by default.
4863
4864 Signed-off-by: Haavard Skinnemoen <[email protected]>
4865
4866commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
4867Author: Haavard Skinnemoen <[email protected]>
4868Date: Wed Mar 21 19:44:48 2007 +0100
4869
4870 AVR32: Provide a definition of struct stat
4871
4872 Copy the definition of struct stat from the Linux kernel.
4873
4874 Signed-off-by: Haavard Skinnemoen <[email protected]>
4875
4876commit 12f099c08167a7a51aeee623bc16dafd0841271c
4877Author: Haavard Skinnemoen <[email protected]>
4878Date: Sun Dec 17 14:46:06 2006 +0100
4879
4880 AVR32: Use initdram() instead of board_init_memories()
4881
4882 Conform to the "standard" interface and use initdram() instead of
4883 board_init_memories() on AVR32. This enables us to get rid of the
4884 sdram_size member of the global_data struct as well.
4885
4886 Signed-off-by: Haavard Skinnemoen <[email protected]>
4887
4888commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
4889Author: Haavard Skinnemoen <[email protected]>
4890Date: Mon Nov 20 15:53:10 2006 +0100
4891
4892 AVR32: Relocate u-boot to SDRAM
4893
4894 Relocate the u-boot image into SDRAM like everyone else does. This
4895 means that we can handle much larger .data and .bss than we used to.
4896
4897 Signed-off-by: Haavard Skinnemoen <[email protected]>
4898
4899commit df548d3c3e2bbc40258713167859ffc2ce99a900
4900Author: Haavard Skinnemoen <[email protected]>
4901Date: Sun Nov 19 18:06:53 2006 +0100
4902
4903 AVR32: Resource management rewrite
4904
4905 Rewrite the resource management code (i.e. I/O memory, clock gating,
4906 gpio) so it doesn't depend on any global state. This is necessary
4907 because this code is heavily used before relocation to RAM, so we
4908 can't write to any global variables.
4909
4910 As an added bonus, this makes u-boot's memory footprint a bit smaller,
4911 although some functionality has been left out; all clocks are enabled
4912 all the time, and there's no checking for gpio line conflicts.
4913
4914 Signed-off-by: Haavard Skinnemoen <[email protected]>
4915
4916commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
4917Author: Haavard Skinnemoen <[email protected]>
4918Date: Sat Nov 18 18:01:13 2006 +0100
4919
4920 AVR32: Clean up memory-map.h for at32ap7000
4921
4922 Convert spaces to tabs (must have missed this one last time around),
4923 sort the entries by address and group them together by bus
4924 connectivity.
4925
4926 Signed-off-by: Haavard Skinnemoen <[email protected]>
4927
4928commit 28c699ef69f4b6cdf252e4747b7b590028a88981
4929Author: Haavard Skinnemoen <[email protected]>
4930Date: Sat Nov 18 17:32:31 2006 +0100
4931
4932 AVR32: Build position-independent u-boot
4933
4934 Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
4935 position independent. This will make relocation a lot easier.
4936
4937 -mno-init-got means that gcc shouldn't emit code to load the GOT
4938 address into r6 in every function prologue. We do it once and for
4939 all in the early startup assembly code, so enabling this option
4940 makes u-boot a bit faster and smaller.
4941
4942 The assembly parts have always been position-independent, so no code
4943 changes should be necessary.
4944
4945 Signed-off-by: Haavard Skinnemoen <[email protected]>
4946
4947commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
4948Author: Haavard Skinnemoen <[email protected]>
4949Date: Sat Nov 18 17:24:31 2006 +0100
4950
4951 AVR32: Use avr32-linux- cross-compilation prefix by default
4952
4953 It doesn't really matter which toolchain you use to compile u-boot,
4954 but the avr32-linux one is probably what most people have installed.
4955
4956 Signed-off-by: Haavard Skinnemoen <[email protected]>
4957
4958commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
4959Author: Haavard Skinnemoen <[email protected]>
4960Date: Sat Nov 18 17:15:30 2006 +0100
4961
4962 AVR32: Split start_u_boot into board_init_f and board_init_r
4963
4964 Split the avr32 initialization code into a function to run before
4965 relocation, board_init_f and a function to run after relocation,
4966 board_init_r. For now, board_init_f simply calls board_init_r
4967 at the end.
4968
4969 Signed-off-by: Haavard Skinnemoen <[email protected]>
4970
8048cdd5
WD		 4971commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
4972Author: Heiko Schocher <[email protected]>
4973Date: Sat Apr 14 05:26:48 2007 +0200
4974
4975 [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
4976 clear the Display after reset.
4977
4978 Signed-off-by: Heiko Schocher <[email protected]>
4979
5f6c732a
WD		 4980commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
4981Author: Denis Peter <[email protected]>
4982Date: Fri Apr 13 09:13:33 2007 +0200
4983
4984 [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
4985
4986 Fix bug introduced by "Fix get_partition_info() parameter error in all
4987 other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
4988 to use diskboot or scsiboot form another device than 0.
4989
4990 Signed-off-by: Denis Peter <[email protected]>
4991
4992commit 0b94504d22e70f537c17a0d38c87edb6e370977d
4993Author: Greg Lopp <[email protected]>
4994Date: Fri Apr 13 08:02:24 2007 +0200
4995
4996 [PATCH] Fix use of "void *" for block dev read/write buffer pointers
4997
4998 Signed-of-by: Greg Lopp <[email protected]>
4999 Acked-by: Grant Likely <[email protected]>
5000
a7676ea7
WD		 5001commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
5002Author: Xie Xiaobo <[email protected]>
5003Date: Fri Mar 9 19:08:25 2007 +0800
5004
5005 Fix two bugs for MPC83xx DDR2 controller SPD Init
5006
5007 There are a few bugs in the cpu/mpc83xx/spd_sdram.c
5008 the first bug is that the picos_to_clk routine introduces a huge
5009 rounding error in 83xx.
5010 the second bug is that the mode register write recovery field is
5011 tWR-1, not tWR >> 1.
5012
5f6c732a
WD		 5013commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
5014Author: Jeffrey Mann <[email protected]>
5015Date: Thu Apr 12 14:15:59 2007 +0200
5016
5017 ppc4xx: Fix i2c divisor calcularion for PPC4xx
5018
5019 This patch fixes changes the i2c_init(...) function to use the function
5020 get_OPB_freq() rather than calculating the OPB speed by
5021 sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
5022 specific per processor. The prior method was not and so was calculating
5023 the wrong speed for some PPC4xx processors.
5024
5025 Signed-off-by: Jeffrey Mann <[email protected]>
5026 Signed-off-by: Stefan Roese <[email protected]>
5027
8048cdd5
WD		 5028commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
5029Author: Wolfgang Denk <[email protected]>
5030Date: Wed Apr 11 17:25:01 2007 +0200
5031
5032 Update CHANGELOG
5033
5034 Signed-off-by: Wolfgang Denk <[email protected]>
5035
6c9ba919
WD		 5036commit 51056dd9863e6a1bc363afbbe1775c58cd967418
5037Author: Wolfgang Denk <[email protected]>
5038Date: Wed Apr 11 17:22:55 2007 +0200
5039
5040 Update for SC3 board
5041
5042 * Make IDE timeout configurable through ide_reset_timeout variable.
5043 * Use Newline as "password" string
5044 * Use just a single partition in NAND flash
5045
fd094c63
WD		 5046commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
5047Author: Haiying Wang <[email protected]>
5048Date: Mon Jan 22 12:37:30 2007 -0600
5049
5050 Add PIXIS FPGA support for MPC8641HPCN board.
5051
5052 Move the 8641HPCN's PIXIS code to the new directory
5053 board/freescale/common/ as it will be shared by
5054 future boards not in the same processor family.
5055
5056 Write a "pixis_reset" command that utilizes the FPGA
5057 reset sequencer to support alternate soft-reset options
5058 such as using the "alternate" flash bank, enabling
5059 the watch dog, or choosing different CPU frequencies.
5060
5061 Add documentation for the pixis_reset to README.mpc8641hpcn.
5062
5063 Signed-off-by: Haiying Wang <[email protected]>
5064 Signed-off-by: Jon Loeliger <[email protected]>
5065
37837828
WD		 5066commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
5067Author: Gerald Van Baren <[email protected]>
5068Date: Fri Apr 6 14:19:43 2007 -0400
5069
5070 Moved fdt command support code to fdt_support.c
5071
5072 ...in preparation for improving the bootm command's handling of fdt blobs.
5073 Also cleaned up some coding sloppiness.
5074
5075commit 6679f9299534e488a171a9bb8f9bb891de247aab
5076Author: Gerald Van Baren <[email protected]>
5077Date: Fri Apr 6 14:17:14 2007 -0400
5078
5079 libfdt: Make fdt_check_header() public
5080
5081 Changed _fdt_check_header() to fdt_check_header() and made it part of
5082 the interface - it is a useful routine.
5083
5084 Also did some asthetics cleanup to the include files (headers).
5085
5f6c732a
WD		 5086commit c0707ce65677650b5ceab0500ee50ae5168afef2
5087Author: Aubrey Li <[email protected]>
5088Date: Thu Apr 5 18:34:06 2007 +0800
5089
5090 [Blackfin][PATCH] Kill off a bunch of common local prototypes
5091
5092commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
5093Author: Aubrey Li <[email protected]>
5094Date: Thu Apr 5 18:33:04 2007 +0800
5095
5096 [Blackfin][PATCH] Fix dynamic CPLB generation issue
5097
5098commit 0445e3a264251d75b1be45ef713c70726a2952f0
5099Author: Aubrey Li <[email protected]>
5100Date: Thu Apr 5 18:31:47 2007 +0800
5101
5102 [Blackfin][PATCH] minior cleanup
5103
5104commit 155fd766573981090e638b493d5857562151862e
5105Author: Aubrey Li <[email protected]>
5106Date: Thu Apr 5 18:31:18 2007 +0800
5107
5108 [Blackfin][PATCH] Fix copyright and update license
5109
5110commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
5111Author: Aubrey Li <[email protected]>
5112Date: Thu Apr 5 18:30:25 2007 +0800
5113
5114 [Blackfin][PATCH] Add BF537 EMAC driver initialization
5115
5116commit 889256e8604e0c68db1d866d720894dffede9df6
5117Author: Aubrey Li <[email protected]>
5118Date: Thu Apr 5 18:29:55 2007 +0800
5119
5120 [Blackfin][PATCH] call real the system synchronize instruction
5121
5122commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
5123Author: Aubrey Li <[email protected]>
5124Date: Thu Apr 5 18:29:17 2007 +0800
5125
5126 [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
5127
5128commit dfeeab2cd680df047e68e723b246adf6f33bb556
5129Author: Aubrey Li <[email protected]>
5130Date: Thu Apr 5 18:28:34 2007 +0800
5131
5132 [Blackfin][PATCH]: fix flash unaligned copy issue
5133
fd094c63
WD		 5134commit 443feb740584e406efa203af909fe2926608e8d5
5135Author: Igor Marnat <[email protected]>
5136Date: Wed Mar 21 09:55:01 2007 +0300
5137
5138 Update usage of 'nc' in README.NetConsole
5139
5140 Added information about usage of NetConsole on systems where the -l and -p
5141 switches are mutually exclusive.
5142
5143 Signed-off-by: Igor Marnat <[email protected]>
5144 Signed-off-by: Ben Warren <[email protected]>
5145
6c9ba919
WD		 5146commit 31c98a88228021b314c89ebb8104fb6473da4471
5147Author: Wolfgang Denk <[email protected]>
5148Date: Wed Apr 4 02:09:30 2007 +0200
5149
5150 Minor coding style cleanup.
5151
31c98a88
WD		 5152commit 94abd7c0583ebe01e799b25f451201deeaab550d
5153Author: Wolfgang Denk <[email protected]>
5154Date: Wed Apr 4 01:49:15 2007 +0200
5155
5156 Minor cleanup.
5157
9986bc3e
WD		 5158commit 822af351ad2babc7d99033361a5fcacd30f6bc78
5159Author: Rodolfo Giometti <[email protected]>
5160Date: Tue Apr 3 14:27:18 2007 +0200
5161
5162 Support for the Philips ISP116x HCD (Host Controller Driver)
5163
5164 Signed-off-by: Rodolfo Giometti <[email protected]>
5165
5166commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8
5167Author: Markus Klotzbuecher <[email protected]>
5168Date: Tue Apr 3 14:27:08 2007 +0200
5169
5170 USB: cleanup monahans usb support. Remove dead code.
5171
5172 Signed-off-by: Markus Klotzbuecher <[email protected]>
5173
5f6c732a
WD		 5174commit a65c5768e5537530bd1780af3d3fddc3113a163c
5175Author: Stefan Roese <[email protected]>
5176Date: Mon Apr 2 10:09:30 2007 +0200
5177
5178 ppc4xx: Change SysACE address on Katmai
5179
5180 With this new base address of the Xilinx SystemACE controller
5181 the Linux driver will be easier to adapt, since it can now be
5182 mapped via the "normal" ioremap() call.
5183
5184 Signed-off-by: Stefan Roese <[email protected]>
5185
94abd7c0
WD		 5186commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
5187Author: Gerald Van Baren <[email protected]>
5188Date: Sat Mar 31 14:30:53 2007 -0400
5189
5190 Fix some minor whitespace violations.
5191
5192commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
5193Author: Gerald Van Baren <[email protected]>
5194Date: Sat Mar 31 12:23:51 2007 -0400
5195
5196 Add a flattened device tree (fdt) command (2 of 2)
5197
5198 Modifications to the existing code to support the new fdt command.
5199
5200commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
5201Author: Gerald Van Baren <[email protected]>
5202Date: Sat Mar 31 12:22:10 2007 -0400
5203
5204 Add a flattened device tree (fdt) command (1 of 2)
5205
5206 The fdt command uses David Gibson's libfdt library to manipulate as well
5207 as print the flattened device tree. This patch is the new command,
5208 the second part is the modifications to the existing code.
5209
5210commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
5211Author: Gerald Van Baren <[email protected]>
5212Date: Sat Mar 31 12:13:43 2007 -0400
5213
5214 libfdt: Enhanced and published fdt_next_tag()
5215
5216 Enhanced the formerly private function _fdt_next_tag() to allow stepping
5217 through the tree, used to produce a human-readable dump, and made
5218 it part of the published interface.
5219 Also added some comments.
5220
5221commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
5222Author: Gerald Van Baren <[email protected]>
5223Date: Sat Mar 31 12:05:39 2007 -0400
5224
5225 libfdt: Customizations for use by u-boot.
5226
5227 Changes to David Gibson's original source to fit into u-boot's
5228 environment. No functionality changes.
5229
5230commit 35748177c64a4a83a00057e93bb33e40278a2a96
5231Author: Gerald Van Baren <[email protected]>
5232Date: Sat Mar 31 12:00:56 2007 -0400
5233
5234 libfdt: Import libfdt source (2 of 2)
5235
5236 This adds the applicable libfdt source files (unmodified) and a README
5237 to explain where the source came from.
5238
5239commit 7cd5da0fe877e7171a4cdd44880bce783132871a
5240Author: Gerald Van Baren <[email protected]>
5241Date: Sat Mar 31 11:59:59 2007 -0400
5242
5243 libfdt: Import libfdt source (1 of 2)
5244
5245 This adds the applicable libfdt source files (unmodified) and a README
5246 to explain where the source came from.
5247
6c9ba919
WD		 5248commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
5249Author: Stefan Roese <[email protected]>
5250Date: Sat Mar 31 13:16:23 2007 +0200
5251
5252 ppc4xx: Update Katmai bootstrap command
5253
5254 Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
5255 is selected.
5256
5257 Signed-off-by: Stefan Roese <[email protected]>
5258
5259commit cabee756a6532986729477c3cc1ea16ef8517ad2
5260Author: Stefan Roese <[email protected]>
5261Date: Sat Mar 31 13:15:06 2007 +0200
5262
5263 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
5264
5265 Additional RAM information is now printed upon powerup, like
5266 DDR2 frequency and CAS latency.
5267
5268 Signed-off-by: Stefan Roese <[email protected]>
5269
5270commit 60723803431ac75cad085690789e433d5ab9174e
5271Author: Stefan Roese <[email protected]>
5272Date: Sat Mar 31 08:48:36 2007 +0200
5273
5274 ppc4xx: Change Yucca config file to support ECC
5275
5276 With the updated 44x DDR2 driver the Yucca board now supports
5277 ECC generation and checking.
5278
5279 Signed-off-by: Stefan Roese <[email protected]>
5280
5281commit 490e5730c674b20d708b783a2c5ffd7208f83873
5282Author: Stefan Roese <[email protected]>
5283Date: Sat Mar 31 08:47:34 2007 +0200
5284
5285 ppc4xx: Fix "bootstrap" command for Katmai board
5286
5287 The board specific "bootstrap" command is now fixed and can
5288 be used for the AMCC Katmai board to configure different
5289 CPU/PLB/OPB frequencies.
5290
5291 Signed-off-by: Stefan Roese <[email protected]>
5292
5293commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
5294Author: Stefan Roese <[email protected]>
5295Date: Sat Mar 31 08:46:08 2007 +0200
5296
5297 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
5298
5299 Fix a bug in the auto calibration routine. This driver now runs
5300 more reliable with the tested modules. It's also tested with
5301 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
5302
5303 Signed-off-by: Stefan Roese <[email protected]>
5304
31c98a88
WD		 5305commit 342cd097be1e7affe82f42ab3da220959a699e64
5306Author: Michal Simek <[email protected]>
5307Date: Fri Mar 30 22:52:09 2007 +0200
5308
5309 [PATCH] Clean include dependence
5310
5311commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
5312Author: Michal Simek <[email protected]>
5313Date: Fri Mar 30 22:42:45 2007 +0200
5314
5315 [CLEAN] Remove inefficient Suzaku code
5316
6c9ba919
WD		 5317commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
5318Author: Stefan Roese <[email protected]>
5319Date: Wed Mar 28 15:03:16 2007 +0200
5320
5321 Merge some AMCC make targets to keep the top-level Makefile smaller
5322
5323 Signed-off-by: Stefan Roese <[email protected]>
5324
5325commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
5326Author: Stefan Roese <[email protected]>
5327Date: Wed Mar 28 14:52:12 2007 +0200
5328
5329 i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
5330
5331 The "old" i2c commands (iprobe, imd...) are now compiled in again,
5332 even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
5333 config option.
5334
5335 Signed-off-by: Stefan Roese <[email protected]>
5336
31c98a88
WD		 5337commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
5338Author: Michal Simek <[email protected]>
5339Date: Tue Mar 27 00:32:16 2007 +0200
5340
5341 PATCH: Resolve GPL license problem
5342
9986bc3e
WD		 5343commit ae00bb4b2944dc64a485ed72a19754b11af7c223
5344Author: Rodolfo Giometti <[email protected]>
5345Date: Mon Mar 26 12:03:36 2007 +0200
5346
5347 PXA: pxa27x USB OHCI support
5348
5349 Signed-off-by: Rodolfo Giometti <[email protected]>
5350
5351commit ae79f60677c208326535647dcbd5c3ec40dbcb0b
5352Author: Markus Klotzbuecher <[email protected]>
5353Date: Mon Mar 26 11:21:05 2007 +0200
5354
5355 USB: remove the S3C24X0_merge #define, which was introduced while
5356 merging OHCI drivers.
5357
5358 Signed-off-by: Markus Klotzbuecher <[email protected]>
5359
31c98a88
WD		 5360commit 1798049522f594013aea29457d46794298c6ae15
5361Author: Michal Simek <[email protected]>
5362Date: Mon Mar 26 01:39:07 2007 +0200
5363
5364 Support for XUPV2P board
5365 Reset support
5366 BSP autoconfig support
5367
6c9ba919
WD		 5368commit 0d974d5297349504a2ddfa09314be573b5df320a
5369Author: Stefan Roese <[email protected]>
5370Date: Sat Mar 24 15:57:09 2007 +0100
5371
5372 [PATCH] Add 4xx GPIO functions
5373
5374 This patch adds some 4xx GPIO functions. It also moves some of the
5375 common code and defines into a common 4xx GPIO header file.
5376
5377 Signed-off-by: Stefan Roese <[email protected]>
5378
5379commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
5380Author: Stefan Roese <[email protected]>
5381Date: Sat Mar 24 15:55:58 2007 +0100
5382
5383 [PATCH] Small Sequoia cleanup
5384
5385 Signed-off-by: Stefan Roese <[email protected]>
5386
5387commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
5388Author: Stefan Roese <[email protected]>
5389Date: Sat Mar 24 15:45:34 2007 +0100
5390
5391 [PATCH] Clean up 40EZ/Acadia support
5392
5393 This patch cleans up all the open issue of the preliminary
5394 Acadia support.
5395
5396 Signed-off-by: Stefan Roese <[email protected]>
5397
94abd7c0
WD		 5398commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
5399Author: Jon Loeliger <[email protected]>
5400Date: Tue Dec 12 11:02:20 2006 -0600
5401
5402 Fix 8641HPCN problem with ld version 2.16
5403
5404 (Dot outside sections problem).
5405
5406 This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
5407
5408 Signed-off-by: Jon Loeliger <[email protected]>
5409
5410commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
5411Author: Haiying Wang <[email protected]>
5412Date: Thu Dec 7 10:35:55 2006 -0600
5413
5414 Set Rev 2.x 86xx PIC in mixed mode.
5415
5416 Prevent false interrupt from hanging Linux as MSR[EE] is set
5417 to enable interrupts by changing the PIC out of the default
5418 pass through mode into mixed mode.
5419
5420 Signed-off-by: Haiying Wang <[email protected]>
5421 Signed-off-by: Jon Loeliger <[email protected]>
5422
5423commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
5424Author: Jason Jin <[email protected]>
5425Date: Thu Dec 7 10:32:35 2006 -0600
5426
5427 Add flash cmd function to 8641HPCN ramboot
5428
5429 Also fixes some commmand for 8641 HPCN ramboot case.
5430
5431 Signed-off-by: Jason Jin <[email protected]>
5432 Signed-off-by: Jon Loeliger <[email protected]>
5433
5434commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
5435Author: Ed Swarthout <[email protected]>
5436Date: Thu Dec 7 10:34:14 2006 -0600
5437
5438 Add support for 8641 Rev 2 silicon.
5439
5440 Without this patch, I am unable to get to the prompt on rev 2 silicon.
5441 Only set ddrioovcr for rev1.
5442
5443 Signed-off-by: Ed Swarthout<[email protected]>
5444 Signed-off-by: Jon Loeliger <[email protected]>
5445
5446commit 44ba464b99001f8bd1c456a1e9d59726252f707a
5447Author: Wolfgang Denk <[email protected]>
5448Date: Thu Mar 22 00:13:12 2007 +0100
5449
5450 Code cleanup / re-insert previous Copyright entries.
5451
5452 Signed-off-by: Wolfgang Denk <[email protected]>
5453
44ba464b
WD		 5454commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
5455Author: Wolfgang Denk <[email protected]>
5456Date: Wed Mar 21 23:26:15 2007 +0100
5457
5458 Code cleanup. Update CHANGELOG
5459
2a8dfe08
WD		 5460commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
5461Author: Stefan Roese <[email protected]>
5462Date: Wed Mar 21 14:54:29 2007 +0100
5463
5464 ppc4xx: Fix file mode of include/configs/acadia.h
5465
5466 Signed-off-by: Stefan Roese <[email protected]>
5467
5468commit d5f4614c9350d9333e575100fb250aab774d0258
5469Author: Markus Klotzbuecher <[email protected]>
5470Date: Wed Mar 21 14:41:46 2007 +0100
5471
5472 SPC1920: fix small clock routing bug
5473
5474 Signed-off-by: Markus Klotzbuecher <[email protected]>
5475
5476commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
5477Author: Stefan Roese <[email protected]>
5478Date: Wed Mar 21 13:39:57 2007 +0100
5479
5480 [PATCH] Add AMCC Acadia (405EZ) eval board support
5481
5482 This patch adds support for the new AMCC Acadia eval board.
5483
5484 Please note that this Acadia/405EZ support is still in a beta stage.
5485 Still lot's of cleanup needed but we need a preliminary release now.
5486
5487 Signed-off-by: Stefan Roese <[email protected]>
5488
5489commit e01bd218b00af73499331a1a701625a852cd286f
5490Author: Stefan Roese <[email protected]>
5491Date: Wed Mar 21 13:38:59 2007 +0100
5492
5493 [PATCH] Add AMCC PPC405EZ support
5494
5495 This patch adds support for the new AMCC 405EZ PPC. It is in
5496 preparation for the AMCC Acadia board support.
5497
5498 Please note that this Acadia/405EZ support is still in a beta stage.
5499 Still lot's of cleanup needed but we need a preliminary release now.
5500
5501 Signed-off-by: Stefan Roese <[email protected]>
5502
5503commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
5504Author: Heiko Schocher <[email protected]>
5505Date: Wed Mar 21 08:45:17 2007 +0100
5506
5507 [PATCH] TQM8272: dont change the bits given from the HRCW
5508 for the SIUMCR and BCR Register.
5509 Fix the calculation for the EEprom Size
5510
5511 Signed-off-by: Heiko Schocher <[email protected]>
5512
44ba464b
WD		 5513commit 654589873dbafcf104dff133ce0d03a4506e9cc3
5514Author: Aubrey Li <[email protected]>
5515Date: Tue Mar 20 18:16:24 2007 +0800
5516
5517 [Blackfin][PATCH] Add BF561 EZKIT board support
5518
5519commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
5520Author: Aubrey Li <[email protected]>
5521Date: Mon Mar 19 22:55:58 2007 +0800
5522
5523 [Blackfin][PATCH] minor cleanup
5524
2a8dfe08
WD		 5525commit 389b6bb50f745bf5038ce030300d8a8512e96f79
5526Author: Wolfgang Denk <[email protected]>
5527Date: Mon Mar 19 13:10:08 2007 +0100
5528
5529 Remove obsoleted POST files.
5530
5531 Signed-off-by: Wolfgang Denk <[email protected]>
5532
44ba464b
WD		 5533commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
5534Author: Aubrey Li <[email protected]>
5535Date: Mon Mar 19 01:26:11 2007 +0800
5536
5537 [PATCH] Add flash chip M29W320ET/B support
5538
5539commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
5540Author: Aubrey Li <[email protected]>
5541Date: Mon Mar 19 01:24:52 2007 +0800
5542
5543 [Blackfin][PATCH] Add BF537 stamp board support
5544
2a8dfe08
WD		 5545commit 8423e5e31a7235d05a482627315fb11d49c17bd7
5546Author: Stefan Roese <[email protected]>
5547Date: Fri Mar 16 21:11:42 2007 +0100
5548
5549 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
5550
5551 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
5552 DDR memory are dynamically programmed matching the total size
5553 of the equipped memory (DIMM modules).
5554
5555 Signed-off-by: Stefan Roese <[email protected]>
5556
5557commit 76d1466f918b881cda2d259254761e73885093c2
5558Author: Matthias Fuchs <[email protected]>
5559Date: Tue Mar 13 13:38:05 2007 +0100
5560
5561 [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
5562 boards in terms of unification.
5563
5564 Signed-off-by: Matthias Fuchs <[email protected]>
5565
5566commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
5567Author: Wolfgang Denk <[email protected]>
5568Date: Tue Mar 13 16:05:55 2007 +0100
5569
5570 Make SC3 board build with 'make O='; use 'addcons' consistently
5571 (SC3 and Jupiter used to use 'addcon' instead).
5572
5573 Signed-off-by: Wolfgang Denk [email protected]
5574
5575commit 8502e30a28e492c756ea2d7df0ace026388fce4b
5576Author: Heiko Schocher <[email protected]>
5577Date: Tue Mar 13 09:40:59 2007 +0100
5578
5579 [PATCH] update board config for jupiter Board:
5580 added Hush Shell,
5581 CONFIG_CMDLINE_EDITING,
5582 CFG_ENV_ADDR_REDUND activated
5583
5584 Signed-off-by: Heiko Schocher <[email protected]>
5585
44ba464b
WD		 5586commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
5587Author: Aubrey Li <[email protected]>
5588Date: Mon Mar 12 12:11:55 2007 +0800
5589
5590 [Blackfin][PATCH] minor cleanup
5591
5592commit bfa5754a58477ac917d21527cd0f079d87cf188e
5593Author: Aubrey Li <[email protected]>
5594Date: Mon Mar 12 01:42:06 2007 +0800
5595
5596 [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
5597
5598commit 8440bb14581a294375c34b91b42512f9753d1130
5599Author: Aubrey Li <[email protected]>
5600Date: Mon Mar 12 00:25:14 2007 +0800
5601
5602 [Blackfin][PATCH] code cleanup
5603
31c98a88
WD		 5604commit cfc67116a706fd18b8f6a9c11a16753c5626d689
5605Author: Michal Simek <[email protected]>
5606Date: Sun Mar 11 13:48:24 2007 +0100
5607
5608 [Microblaze][PATCH] part 2
5609 timer support
5610 interrupt controller support
5611 flash support
5612 ethernet support
5613 cache support
5614 board information support
5615 env support
5616 booting image support
5617
5618 adding support for Xilinx ML401
5619
5620commit 76316a318de91f6184e7c22a10e02d275ade2441
5621Author: Michal Simek <[email protected]>
5622Date: Sun Mar 11 13:42:58 2007 +0100
5623
5624 [Microblaze][PATCH]
5625 timer support
5626 interrupt controller support
5627 flash support
5628 ethernet support
5629 cache support
5630 board information support
5631 env support
5632 booting image support
5633
5634 adding support for Xilinx ML401
5635
44ba464b
WD		 5636commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
5637Author: Aubrey Li <[email protected]>
5638Date: Sat Mar 10 23:49:29 2007 +0800
5639
5640 [Blackfin][PATCH] code cleanup
5641
5642commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
5643Author: Aubrey.Li <[email protected]>
5644Date: Fri Mar 9 13:40:56 2007 +0800
5645
5646 [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
5647
5648commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
5649Author: Aubrey.Li <[email protected]>
5650Date: Fri Mar 9 13:38:44 2007 +0800
5651
5652 [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
5653
2a8dfe08
WD		 5654commit 992423ab43c2bcf6b704853bd00af77450915e20
5655Author: Stefan Roese <[email protected]>
5656Date: Thu Mar 8 23:00:08 2007 +0100
5657
5658 ppc4xx: Fix file mode of sequoia.c
5659
5660 Signed-off-by: Stefan Roese <[email protected]>
5661
5662commit eb92f613556800f7483666db09d9a237ad911d4a
5663Author: Wolfgang Denk <[email protected]>
5664Date: Thu Mar 8 22:52:51 2007 +0100
5665
5666 Minor cleanup.
5667
5668commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
5669Author: John Otken [email protected] <[email protected]>
5670Date: Thu Mar 8 09:39:48 2007 -0600
5671
5672 ppc4xx: Clear Sequoia/Rainier security engine reset bits
5673
5674 Signed-off-by: John Otken [email protected] <[email protected]>
5675
5676commit 650a330dd2539130c8c324791e2f9f75aed79d4e
5677Author: Matthias Fuchs <[email protected]>
5678Date: Thu Mar 8 16:26:52 2007 +0100
5679
5680 [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
5681
5682 Signed-off-by: Matthias Fuchs <[email protected]>
5683
5684commit d9fc703246840c4b268debf48c334ba55c597dc0
5685Author: Matthias Fuchs <[email protected]>
5686Date: Thu Mar 8 16:25:47 2007 +0100
5687
5688 [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
5689
5690 Signed-off-by: Matthias Fuchs <[email protected]>
5691
5692commit ced5b9029043397348cdc88e0cfcd6b1f629250b
5693Author: Matthias Fuchs <[email protected]>
5694Date: Thu Mar 8 16:23:11 2007 +0100
5695
5696 [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
5697
5698 Signed-off-by: Matthias Fuchs <[email protected]>
5699
5700commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
5701Author: Matthias Fuchs <[email protected]>
5702Date: Thu Mar 8 16:20:32 2007 +0100
5703
5704 [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
5705
5706 Signed-off-by: Matthias Fuchs <[email protected]>
5707
5708commit f9fc6a5852a6335840882fa2111925010eea1abe
5709Author: Matthias Fuchs <[email protected]>
5710Date: Wed Mar 7 15:32:01 2007 +0100
5711
5712 fixed ethernet phy configuration for plu405 board
5713
5714 Signed-off-by: Matthias Fuchs <[email protected]>
5715
5716commit 769104c9356594deb2092e204a39c05b33202d6c
5717Author: Wolfgang Denk <[email protected]>
5718Date: Thu Mar 8 21:49:27 2007 +0100
5719
5720 Minor cleanup
5721
769104c9
WD		 5722commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
5723Author: Stefan Roese <[email protected]>
5724Date: Thu Mar 8 10:13:16 2007 +0100
5725
5726 [PATCH] Update AMCC Luan 440SP eval board support
5727
5728 The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
5729 inititializition. This includes DDR auto calibration and support
5730 for different DIMM modules, instead of the fixed setup used in
5731 the earlier version.
5732
5733 This patch also enables the cache in FLASH for the startup
5734 phase of U-Boot (while running from FLASH). After relocating to
5735 SDRAM the cache is disabled again. This will speed up the boot
5736 process, especially the SDRAM setup, since there are some loops
5737 for memory testing (auto calibration).
5738
5739 Signed-off-by: Stefan Roese <[email protected]>
5740
5741commit 2f5df47351910a2936c7741cf111855829200943
5742Author: Stefan Roese <[email protected]>
5743Date: Thu Mar 8 10:10:18 2007 +0100
5744
5745 [PATCH] Update AMCC Yucca 440SPe eval board support
5746
5747 The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
5748 inititializition. This includes DDR auto calibration and support
5749 for different DIMM modules, instead of the fixed setup used in
5750 the earlier version.
5751
5752 Signed-off-by: Stefan Roese <[email protected]>
5753
5754commit 2721a68a9ea91f1e494649ce68b2577261f578e2
5755Author: Stefan Roese <[email protected]>
5756Date: Thu Mar 8 10:07:18 2007 +0100
5757
5758 ppc4xx: Small AMCC Katmai 440SPe update
5759
5760 Signed-off-by: Stefan Roese <[email protected]>
5761
5762commit df294497479b1dca6dd86318b2a912f72fede0df
5763Author: Stefan Roese <[email protected]>
5764Date: Thu Mar 8 10:06:09 2007 +0100
5765
5766 ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
5767
5768 Signed-off-by: Stefan Roese <[email protected]>
5769
fd094c63
WD		 5770commit 83853178bd36bca6f0f8f1331476620c84a587fc
5771Author: Ed Swarthout <[email protected]>
5772Date: Wed Mar 7 12:14:50 2007 -0600
5773
5774 net - Support ping reply when processing net-loop
5775
5776 Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
5777
5778 This permits the ping command to test the phy interface when the phy
5779 is put in loopback mode (typically by setting register 0 bit 14).
5780
5781 It also allows the port to respond to an external ping when u-boot is
5782 processing some other net command (such as tftp). This is useful when
5783 tftp appears to hang.
5784
5785 Signed-off-by: Ed Swarthout <[email protected]>
5786 Signed-off-by: Ben Warren <[email protected]>
5787
769104c9
WD		 5788commit fa1aef15bcd47736687be1af544506e90fba545d
5789Author: Stefan Roese <[email protected]>
5790Date: Wed Mar 7 16:43:00 2007 +0100
5791
5792 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
5793
5794 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
5795 DDR memory are dynamically programmed matching the total size
5796 of the equipped memory (DIMM modules).
5797
5798 Signed-off-by: Stefan Roese <[email protected]>
5799
5800commit e2ebe696818939e2b974628be9c921ea3fe9de13
5801Author: Stefan Roese <[email protected]>
5802Date: Wed Mar 7 16:39:36 2007 +0100
5803
5804 [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
5805
5806 This patch fixes a problem that occurs when 2 DIMM's are
5807 used. This problem was first spotted and fixed by Gerald Jackson
5808 <[email protected]> but this patch fixes the
5809 problem in a little more clever way.
5810
5811 This patch also adds the nice functionality to dynamically
5812 create the TLB entries for the SDRAM (tlb.c). So we should
5813 never run into such problems with wrong (too short) TLB
5814 initialization again on these platforms.
5815
5816 As this feature is new to the "old" 44x SPD DDR driver, it
5817 has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
5818
5819 Signed-off-by: Stefan Roese <[email protected]>
5820
5821commit 39218433983417b9df087976a79e3f80dd5e83d6
5822Author: Wolfgang Denk <[email protected]>
5823Date: Wed Mar 7 16:33:44 2007 +0100
5824
5825 UC101: fix compiler warnings
5826
5827commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
5828Author: Wolfgang Denk <[email protected]>
5829Date: Wed Mar 7 16:19:46 2007 +0100
5830
5831 HMI1001: fix build error, cleanup compiler warnings.
5832
5833commit ad5bb451ade552c44bef9119d907929ebc2c126f
5834Author: Wolfgang Denk <[email protected]>
5835Date: Tue Mar 6 18:08:43 2007 +0100
5836
5837 Restructure POST directory to support of other CPUs, boards, etc.
5838
5839commit a5284efd125967675b2e9c6ef7b95832268ad360
5840Author: Wolfgang Denk <[email protected]>
5841Date: Tue Mar 6 18:01:47 2007 +0100
5842
5843 Fix HOSTARCH handling.
5844 Patch by Mike Frysinger, Mar 05 2007
5845
5846commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
5847Author: Stefan Roese <[email protected]>
5848Date: Tue Mar 6 07:47:04 2007 +0100
5849
5850 [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
5851
5852 As provided by the AMCC applications team, this patch optimizes the
5853 DDR2 setup for 166MHz bus speed. The values provided are also save
5854 to use on a "normal" 133MHz PLB bus system. Only the refresh counter
5855 setup has to be adjusted as done in this patch.
5856
5857 For this the NAND booting version had to include the "speed.c" file
5858 from the cpu/ppc4xx directory. With this addition the NAND SPL image
5859 will just fit into the 4kbytes of program space. gcc version 4.x as
5860 provided with ELDK 4.x is needed to generate this optimized code.
5861
5862 Signed-off-by: Stefan Roese <[email protected]>
5863
2a26ec47
WD		 5864commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
5865Author: Wolfgang Denk <[email protected]>
5866Date: Sun Mar 4 01:36:05 2007 +0100
5867
5868 Some code cleanup.
5869
2a8dfe08
WD		 5870commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
5871Author: Kim Phillips <[email protected]>
5872Date: Wed Feb 28 00:02:04 2007 -0600
5873
5874 mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
5875
5876 (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
5877
5878commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
5879Author: Kumar Gala <[email protected]>
5880Date: Tue Feb 27 23:51:42 2007 -0600
5881
5882 mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
5883
5884 The config value for:
5885 * CFG_ACR_PIPE_DEP
5886 * CFG_ACR_RPTCNT
5887 * CFG_SPCR_TSEC1EP
5888 * CFG_SPCR_TSEC2EP
5889 * CFG_SCCR_TSEC1CM
5890 * CFG_SCCR_TSEC2CM
5891
5892 Were not being used when setting the appropriate register
5893
5894 Added:
5895 * CFG_SCCR_USBMPHCM
5896 * CFG_SCCR_USBDRCM
5897 * CFG_SCCR_PCICM
5898 * CFG_SCCR_ENCCM
5899
5900 To allow full config of the SCCR.
5901
5902 Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
5903 that were just bogus.
5904
5905 Signed-off-by: Kumar Gala <[email protected]>
5906
5907commit d51b3cf371cd441030460ef19d36b2924c361b1a
5908Author: Kim Phillips <[email protected]>
5909Date: Thu Feb 22 20:06:57 2007 -0600
5910
5911 mpc83xx: update [local-]mac-address properties on UEC based devices
5912
5913 8360 and 832x weren't updating their [local-]mac-address
5914 properties. This patch fixes that.
5915
5916 Signed-off-by: Kim Phillips <[email protected]>
5917
5918commit 61f4f912acbe60776c5e00df1ec94094ce672957
5919Author: Timur Tabi <[email protected]>
5920Date: Tue Feb 13 10:41:42 2007 -0600
5921
5922 mpc83xx: write MAC address to mac-address and local-mac-address
5923
5924 Some device trees have a mac-address property, some have local-mac-address,
5925 and some have both. To support all of these device trees, this patch
5926 updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
5927 This function already updates local-mac-address.
5928
5929 Signed-off-by: Timur Tabi <[email protected]>
5930
5931commit 22d71a71f57fd5d38b27ac3848e50d790360a598
5932Author: Kim Phillips <[email protected]>
5933Date: Tue Feb 27 18:41:08 2007 -0600
5934
5935 mpc83xx: add command line editing by default
5936
5937commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
5938Author: Kim Phillips <[email protected]>
5939Date: Wed Feb 14 19:50:53 2007 -0600
5940
5941 mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
5942
5943 Disable G1TXCLK, G2TXCLK h/w buffers. This patch
5944 fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
5945
5946 Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
5947
5948 Signed-off-by: Kim Phillips <[email protected]>
5949 Signed-off-by: Emilian Medve <[email protected]>
5950
5951commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
5952Author: Xie Xiaobo <[email protected]>
5953Date: Wed Feb 14 18:27:17 2007 +0800
5954
5955 mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
5956
5957 The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
5958 it pass DDR/DDR2 compliance tests.
5959
5960 Signed-off-by: Xie Xiaobo <[email protected]>
5961
5962commit b110f40bd180c6b560276589beedf753e97c46ce
5963Author: Xie Xiaobo <[email protected]>
5964Date: Wed Feb 14 18:27:06 2007 +0800
5965
5966 mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
5967
5968 MPC8360E rev2.0 have new spridr,and PVR value,
5969 The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
5970
5971 Signed-off-by: Xie Xiaobo <[email protected]>
5972
5973commit 8d172c0f0d85998a256a95b7459a5403a30380ed
5974Author: Xie Xiaobo <[email protected]>
5975Date: Wed Feb 14 18:26:44 2007 +0800
5976
5977 mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
5978
5979 MPC8349E rev3.1 have new spridr,and PVR value,
5980 The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
5981
5982 Signed-off-by: Xie Xiaobo<[email protected]>
5983
5984commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
5985Author: Joakim Tjernlund <[email protected]>
5986Date: Wed Jan 31 11:04:19 2007 +0100
5987
5988 mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
5989
5990 Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
5991 which is used to se if an slave will ACK after receiving its address.
5992
5993 Correct i2c probing to use this method as the old method could upset
5994 a slave as it wrote a data byte to it.
5995
5996 Add a small delay in i2c_init() to let the controller
5997 shutdown any ongoing I2C activity.
5998
5999 Signed-off-by: Joakim Tjernlund <[email protected]>
6000
6001commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
6002Author: Timur Tabi <[email protected]>
6003Date: Wed Jan 31 15:54:29 2007 -0600
6004
6005 mpc83xx: Add support for the MPC8349E-mITX-GP
6006
6007 Add support for the MPC8349E-mITX-GP, a stripped-down version of the
6008 MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
6009 HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
6010
6011 Signed-off-by: Timur Tabi <[email protected]>
6012
6013commit fab16807adad350f618024350c6950165c247c72
6014Author: Timur Tabi <[email protected]>
6015Date: Wed Jan 31 15:54:20 2007 -0600
6016
6017 mpc83xx: Delete sdram_init() for MPC8349E-mITX
6018
6019 There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
6020 never does anything. This patch deletes it.
6021
6022 Signed-off-by: Timur Tabi <[email protected]>
6023
6024commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
6025Author: Dave Liu <[email protected]>
6026Date: Fri Jan 19 10:43:26 2007 +0800
6027
6028 mpc83xx: Fix the LAW1/3 bug
6029
6030 The patch solves the alignment problem of the local bus access windows to
6031 render accessible the memory bank and PHY registers of UPC 1 (starting at
6032 0xf801 0000). What we actually did was to adjust the sizes of the bus
6033 access windows so that the base address alignment requirement would be met.
6034
6035 Signed-off-by: Chereji Marian <[email protected]>
6036 Signed-off-by: Gridish Shlomi <[email protected]>
6037 Signed-off-by: Dave Liu <[email protected]>
6038
6039commit 97c4b397dce236a7318b304667bf89e59d08b17c
6040Author: Kim Phillips <[email protected]>
6041Date: Tue Jan 30 16:15:31 2007 -0600
6042
6043 mpc83xx: don't hang if watchdog configured on 8360, 832x
6044
6045 don't hang if watchdog configured on 8360, 832x
6046
6047 The watchdog programming model is the same across all 83xx devices;
6048 make the code reflect that.
6049
6050commit b70047478570e371ce7223be342ce98afea0f7d6
6051Author: Kim Phillips <[email protected]>
6052Date: Tue Jan 30 16:15:21 2007 -0600
6053
6054 mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
6055
6056 protect memcpy to bad address if a local-mac-address is missing from dt
6057
6058commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
6059Author: Kim Phillips <[email protected]>
6060Date: Tue Jan 30 16:15:04 2007 -0600
6061
6062 mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
6063
6064 make 8360 default environment fdt be 8360 (not 8349)
6065
6066commit a28899c910024a0226331df07207b1038c300c93
6067Author: Emilian Medve <[email protected]>
6068Date: Tue Jan 30 16:14:50 2007 -0600
6069
6070 mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
6071
6072 The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
6073 be used for busy-waiting since it strips the 'volatile' property from
6074 the bd variable. gcc3 was working by pure luck.
6075
6076 This is a follow on patch to "Fix the UEC driver bug of QE"
6077
6078commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
6079Author: Kumar Gala <[email protected]>
6080Date: Tue Jan 30 14:08:30 2007 -0600
6081
6082 mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
6083
6084 The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
6085 MPC834X class processors. Change the protections from CONFIG_MPC8349 to
6086 CONFIG_MPC834X so they are more generic.
6087
6088 Signed-off-by: Kumar Gala <[email protected]>
6089
6090commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
6091Author: Kim Phillips <[email protected]>
6092Date: Thu Jan 25 13:40:55 2007 -0600
6093
6094 mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
6095
6096commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
6097Author: Kim Phillips <[email protected]>
6098Date: Wed Jan 24 17:18:37 2007 -0600
6099
6100 mpc83xx: sort Makefile targets
6101
6102 reordered targets alphabetically
6103
6104commit 91e25769771c1164ed63ffca0add49f934ae3343
6105Author: Paul Gortmaker <[email protected]>
6106Date: Tue Jan 16 11:38:14 2007 -0500
6107
6108 mpc83xx: U-Boot support for Wind River SBC8349
6109
6110 I've redone the SBC8349 support to match git-current, which
6111 incorporates all the MPC834x updates from Freescale since the 1.1.6
6112 release, including the DDR changes.
6113
6114 I've kept all the SBC8349 files as parallel as possible to the
6115 MPC8349EMDS ones for ease of maintenance and to allow for easy
6116 inspection of what was changed to support this board. Hence the SBC8349
6117 U-Boot has FDT support and everything else that the MPC8349EMDS has.
6118
6119 Fortunately the Freescale updates added support for boards using CS0,
6120 but I had to change spd_sdram.c to allow for board specific settings for
6121 the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
6122 default if the board doesn't specify a value.)
6123
6124 Hopefully this should be mergeable as-is and require no whitespace
6125 cleanups or similar, but if something doesn't measure up then let me
6126 know and I'll fix it.
6127
6128 Thanks,
6129 Paul.
6130
6131commit 05031db456ab227f3e3752f37b9b812b65bb83ad
6132Author: Sam Song <[email protected]>
6133Date: Thu Dec 14 19:03:21 2006 +0800
6134
6135 mpc83xx: Remove a redundant semicolon in mpc8349itx.c
6136
6137 A redundant semicolon existed in mpc8349itx.c
6138 should be removed.
6139
6140 Signed-off-by: Sam Song <[email protected]>
6141
6142commit f35f358241c549be3f75cfe2eaa642914275b7ba
6143Author: Jerry Van Baren <[email protected]>
6144Date: Wed Dec 6 21:23:55 2006 -0500
6145
6146 mpc83xx: Put the version (and magic) after the HRCW.
6147
6148 Put the version (and magic) after the HRCW. This puts it in a fixed
6149 location in flash, not at the start of flash but as close as we can get.
6150
6151 Signed-off-by: Jerry Van Baren <[email protected]>
6152
6153commit 48aecd969171a6e99a55fae04933857787f9a5bd
6154Author: Dave Liu <[email protected]>
6155Date: Thu Dec 7 21:14:51 2006 +0800
6156
6157 mpc83xx: Add the MPC832XEMDS board readme
6158
6159 Add the MPC832XEMDS board readme
6160
6161 Signed-off-by: Dave Liu <[email protected]>
6162
6163commit 24c3aca3f1358b113d3215adb5433b156e99f72b
6164Author: Dave Liu <[email protected]>
6165Date: Thu Dec 7 21:13:15 2006 +0800
6166
6167 mpc83xx: Add support for the MPC832XEMDS board
6168
6169 This patch supports DUART, ETH3/4 and PCI etc.
6170
6171 Signed-off-by: Dave Liu <[email protected]>
6172
6173commit e080313c32322e15ab5a18eb896a252858c57284
6174Author: Dave Liu <[email protected]>
6175Date: Thu Dec 7 21:11:58 2006 +0800
6176
6177 mpc83xx: streamline the 83xx immr head file
6178
6179 For better format and style, I streamlined the 83xx head files,
6180 including immap_83xx.h and mpc83xx.h. In the old head files, 1)
6181 duplicated macro definition appear in the both files; 2) the structure
6182 of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
6183 macro definition put inside the each structure. So, I cleaned up the
6184 structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
6185 moved the macro definition to mpc83xx.h, Just like MPC8260.
6186
6187 CHANGELOG
6188
6189 *streamline the 83xx immr head file
6190
6191 Signed-off-by: Dave Liu <[email protected]>
6192
6193commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
6194Author: Dave Liu <[email protected]>
6195Date: Wed Dec 6 11:38:17 2006 +0800
6196
6197 mpc83xx: Fix the UEC driver bug of QE
6198
6199 The patch prevents the GCC tool chain from striping useful code for
6200 optimization. It will make UEC ethernet driver workable, Otherwise the
6201 UEC will fail in tx when you are using gcc4.x. but the driver can work
6202 when using gcc3.4.3.
6203
6204 CHANGELOG
6205
6206 *Prevent the GCC from striping code for optimization, Otherwise the UEC
6207 will tx failed when you are using gcc4.x.
6208
6209 Signed-off-by: Dave Liu <[email protected]>
6210
769104c9
WD		 6211commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
6212Author: Stefan Roese <[email protected]>
6213Date: Thu Mar 1 21:11:36 2007 +0100
6214
6215 [PATCH] Update AMCC Katmai 440SPe eval board support
6216
6217 This patch updates the recently added Katmai board support. The biggest
6218 change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
6219 driver.
6220
6221 Please note, that still some problems are left with some memory
6222 configurations. See the driver for more details.
6223
6224 Signed-off-by: Stefan Roese <[email protected]>
6225
6226commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
6227Author: Stefan Roese <[email protected]>
6228Date: Thu Mar 1 07:03:25 2007 +0100
6229
6230 [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
6231
6232 Signed-off-by: Stefan Roese <[email protected]>
6233
6234commit ccbc7036648e465697ca298ba51e0e76dda352a0
6235Author: Wolfgang Denk <[email protected]>
6236Date: Wed Feb 28 01:28:53 2007 +0100
6237
6238 SC3: fix typo in default environment
6239
6240commit e344568b1b46af85ec32d815586f91bc115d6223
6241Author: Sergei Poselenov <[email protected]>
6242Date: Tue Feb 27 20:15:30 2007 +0300
6243
6244 MCC200: Fixes for update procedure
6245
6246 - fix logic error in image type handling
6247 - make sure file system images (cramfs etc.) get stored in flash
6248 with image header stripped so they can be mounted through MTD
6249
6250commit 743571145b37182757d4e688a77860b36ee77573
6251Author: Wolfgang Denk <[email protected]>
6252Date: Tue Feb 27 14:26:04 2007 +0100
6253
6254 Minor code cleanup.
6255
74357114
WD		 6256commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
6257Author: Sergei Poselenov <[email protected]>
6258Date: Tue Feb 27 12:40:16 2007 +0300
6259
6260 MCC200 update - add LCD Progress Indicator
6261
6262commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
6263Author: Stefan Roese <[email protected]>
6264Date: Thu Feb 22 07:43:34 2007 +0100
6265
6266 [PATCH] get_dev() now unconditionally uses manual relocation
6267
6268 Since the relocation fix is not included yet and we're not sure how
6269 it will be added, this patch removes code that required relocation
6270 to be fixed for now.
6271
6272 Signed-off-by: Stefan Roese <[email protected]>
6273
6274commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
6275Author: Stefan Roese <[email protected]>
6276Date: Thu Feb 22 07:40:23 2007 +0100
6277
6278 [PATCH] Change systemace driver to select 8 & 16bit mode
6279
6280 As suggested by Grant Likely this patch enables the Xilinx SystemACE
6281 driver to select 8 or 16bit mode upon startup.
6282
6283 Signed-off-by: Stefan Roese <[email protected]>
6284
6285commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
6286Author: Haiying Wang <[email protected]>
6287Date: Wed Feb 21 16:52:31 2007 +0100
6288
6289 [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
6290
6291 Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
6292 is fully finished. The sync() is defined in each CPU's io.h file. For
6293 those CPUs which do not need sync for now, a dummy sync() is defined in
6294 their io.h as well.
6295
6296 Signed-off-by: Haiying Wang <[email protected]>
6297
6298commit da04995c7dc6772013a9a0dc5c767f190c402478
6299Author: Stefan Roese <[email protected]>
6300Date: Wed Feb 21 13:44:34 2007 +0100
6301
6302 [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
6303
6304 Signed-off-by: Stefan Roese <[email protected]>
6305
6306commit 751bb57107d78978ae08e697c3deba816f5be091
6307Author: Stefan Roese <[email protected]>
6308Date: Tue Feb 20 13:21:57 2007 +0100
6309
6310 [PATCH] Fix relocation problem with "new" get_dev() function
6311
6312 This patch enables the "new" get_dev() function for block devices
6313 introduced by Grant Likely to be used on systems that still suffer
6314 from the relocation problems (manual relocation neede because of
6315 problems with linker script).
6316
6317 Hopefully we can resolve this relocation issue soon for all platform
6318 so we don't need this additional code anymore.
6319
6320 Signed-off-by: Stefan Roese <[email protected]>
6321
6322commit d93e2212f962668b3dce091ff5edc33f2347fe37
6323Author: Stefan Roese <[email protected]>
6324Date: Tue Feb 20 13:17:42 2007 +0100
6325
6326 [PATCH] Update SystemACE driver for 16bit access
6327
6328 This patch removes some problems when the Xilinx SystemACE driver
6329 is used with 16bit access on an big endian platform (like the
6330 AMCC Katmai).
6331
6332 Signed-off-by: Stefan Roese <[email protected]>
6333
6334commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
6335Author: Stefan Roese <[email protected]>
6336Date: Tue Feb 20 13:15:40 2007 +0100
6337
6338 [PATCH] Clean up Katmai (440SPe) linker script
6339
6340 Signed-off-by: Stefan Roese <[email protected]>
6341
6342commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
6343Author: Stefan Roese <[email protected]>
6344Date: Tue Feb 20 10:57:08 2007 +0100
6345
6346 [PATCH] Add support for the AMCC Katmai (440SPe) eval board
6347
6348 Signed-off-by: Stefan Roese <[email protected]>
6349
6350commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
6351Author: Stefan Roese <[email protected]>
6352Date: Tue Feb 20 10:51:26 2007 +0100
6353
6354 [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
6355
6356 This patch switches to the desired I2C bus when the date/dtt
6357 commands are called. This can be configured using the
6358 CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
6359
6360 Signed-off-by: Stefan Roese <[email protected]>
6361
6362commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
6363Author: Stefan Roese <[email protected]>
6364Date: Tue Feb 20 10:43:34 2007 +0100
6365
6366 [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
6367
6368 This patch adds support for the DDR2 controller used on the
6369 440SP and 440SPe. It is tested on the Katmai (440SPe) eval
6370 board and works fine with the following DIMM modules:
6371
6372 - Corsair CM2X512-5400C4 (512MByte per DIMM)
6373 - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
6374 - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
6375
6376 This patch also adds the nice functionality to dynamically
6377 create the TLB entries for the SDRAM (tlb.c). So we should
6378 never run into such problems with wrong (too short) TLB
6379 initialization again on these platforms.
6380
6381 Signed-off-by: Stefan Roese <[email protected]>
6382
6383commit 36d830c9830379045f5daa9f542ac1c990c70068
6384Author: Stefan Roese <[email protected]>
6385Date: Tue Feb 20 10:35:42 2007 +0100
6386
6387 [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
6388
6389 Since the existing 4xx SPD SDRAM initialization routines for the
6390 405 SDRAM controller and the 440 DDR controller don't have much in
6391 common this patch splits both drivers into different files.
6392
6393 This is in preparation for the 440 DDR2 controller support (440SP/e).
6394
6395 Signed-off-by: Stefan Roese <[email protected]>
6396
6397commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
6398Author: Stefan Roese <[email protected]>
6399Date: Tue Feb 20 10:27:08 2007 +0100
6400
6401 [PATCH] PPC4xx: Add support for multiple I2C busses
6402
6403 This patch adds support for multiple I2C busses on the PPC4xx
6404 platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
6405 to make use of this feature.
6406
6407 It also merges the 405 and 440 i2c header files into one common
6408 file 4xx_i2c.h.
6409
6410 Also the 4xx i2c reset procedure is reworked since I experienced
6411 some problems with the first access on the 440SPe Katmai board.
6412
6413 Signed-off-by: Stefan Roese <[email protected]>
6414
6415commit eb867a76238fb38e952c37871b16d0d7fd61c95f
6416Author: Grant Likely <[email protected]>
6417Date: Tue Feb 20 09:05:45 2007 +0100
6418
6419 [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
6420
6421 Block device read/write is anonymous data; there is no need to use a
6422 typed pointer. void * is fine. Also add a hook for block_read functions
6423
6424 Signed-off-by: Grant Likely <[email protected]>
6425
6426commit 53758fa20e935cc87eeb0519ed365df753a6f289
6427Author: Grant Likely <[email protected]>
6428Date: Tue Feb 20 09:05:38 2007 +0100
6429
6430 [PATCH 8_9] Add block_write hook to block_dev_desc_t
6431
6432 Preparation for future patches which support block device writing
6433
6434 Signed-off-by: Grant Likely <[email protected]>
6435
6436commit f4852ebe6ca946a509667eb68be42026f837be76
6437Author: Grant Likely <[email protected]>
6438Date: Tue Feb 20 09:05:31 2007 +0100
6439
6440 [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
6441
6442 Register read/write does not need to be wrapped in a full function. The
6443 patch replaces them with macros.
6444
6445 Signed-off-by: Grant Likely <[email protected]>
6446
6447commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
6448Author: Grant Likely <[email protected]>
6449Date: Tue Feb 20 09:05:23 2007 +0100
6450
6451 [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
6452
6453 The code in this file is not a command; it is a device driver. Put it in
6454 the correct place. There are zero functional changes in this patch, it
6455 only moves the file.
6456
6457 Signed-off-by: Grant Likely <[email protected]>
6458
6459commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
6460Author: Grant Likely <[email protected]>
6461Date: Tue Feb 20 09:05:16 2007 +0100
6462
6463 [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
6464
6465 This patch is in preparation of additional changes to the sysace driver.
6466 May as well take this opportunity to fixup the inconsistent whitespace since
6467 this file is about to undergo major changes anyway.
6468
6469 There are zero functional changes in this patch. It only cleans up the
6470 the whitespace.
6471
6472 Signed-off-by: Grant Likely <[email protected]>
6473
6474commit 80ba981d940471fe7e539e64fa3d2bd80002beda
6475Author: Grant Likely <[email protected]>
6476Date: Tue Feb 20 09:05:07 2007 +0100
6477
6478 [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
6479
6480 isprint is already defined in ctype.c
6481
6482 Signed-off-by: Grant Likely <[email protected]>
6483
6484commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
6485Author: Grant Likely <[email protected]>
6486Date: Tue Feb 20 09:05:00 2007 +0100
6487
6488 [PATCH 3_9] Move buffer print code from md command to common function
6489
6490 Printing a buffer is a darn useful thing. Move the buffer print code
6491 into print_buffer() in lib_generic/
6492
6493 Signed-off-by: Grant Likely <[email protected]>
6494
6495commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
6496Author: Grant Likely <[email protected]>
6497Date: Tue Feb 20 09:04:52 2007 +0100
6498
6499 [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
6500
6501 Change the xilinx device drivers and board code to include config.h
6502 instead of xparameters.h directly. config.h always includes the
6503 correct xparameters file. This change reduces the posibility of
6504 including the wrong file when adding a new xilinx board port
6505
6506 Signed-off-by: Grant Likely <[email protected]>
6507
6508commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
6509Author: Grant Likely <[email protected]>
6510Date: Tue Feb 20 09:04:34 2007 +0100
6511
6512 [PATCH 1_4] Merge common get_dev() routines for block devices
6513
6514 Each of the filesystem drivers duplicate the get_dev routine. This change
6515 merges them into a single function in part.c
6516
6517 Signed-off-by: Grant Likely <[email protected]>
6518
6519commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
6520Author: Wolfgang Denk <[email protected]>
6521Date: Mon Feb 19 23:09:51 2007 +0100
6522
6523 MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
6524 as root file system images.
6525
6526commit 489c696ae7211218961d159e43e722d74c36fcbc
6527Author: Sergei Poselenov <[email protected]>
6528Date: Wed Feb 14 14:30:28 2007 +0300
6529
6530 MCC200: Extensions to Software Update Mechanism
6531
6532 Update / extend Software Update Mechanism for MCC200 board:
6533
6534 - Add support for rootfs image added. The environment variables
6535 "rootfs_st" and "rootfs_nd" can be used to override the default
6536 values of the image start and end.
6537 - Remove excessive key check code.
6538 - Code cleanup.
6539
6540commit 4be23a12f23f1372634edc3215137b09768b7949
6541Author: Stefan Roese <[email protected]>
6542Date: Mon Feb 19 08:23:15 2007 +0100
6543
6544 [PATCH] Update Sequoia EBC configuration (NOR FLASH)
6545
6546 As spotted by Matthias Fuchs, the READY input should not be
6547 enabled for the NOR FLASH on the Sequoia board.
6548
6549 Signed-off-by: Stefan Roese <[email protected]>
6550
769104c9
WD		 6551commit 2605e90bf676d48123afe5719a846d2b52b24aac
6552Author: Heiko Schocher <[email protected]>
6553Date: Fri Feb 16 07:57:42 2007 +0100
6554
6555 [PATCH] Added support for the jupiter board.
6556
6557 Signed-off-by: Heiko Schocher <[email protected]>
6558
74357114
WD		 6559commit 497d012e5be0194e1084073d0081eb1a844796b2
6560Author: Gary Jennejohn <[email protected]>
6561Date: Mon Feb 12 13:11:50 2007 +0100
6562
6563 LPC2292: patch from Siemens.
6564
6565commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
6566Author: Stefan Roese <[email protected]>
6567Date: Sat Feb 10 08:49:31 2007 +0100
6568
6569 [PATCH] Add missing p3mx.h file to repository (ups)
6570
6571 Signed-off-by: Stefan Roese <[email protected]>
6572
6573commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
6574Author: Bartlomiej Sieka <[email protected]>
6575Date: Fri Feb 9 10:45:42 2007 +0100
6576
6577 [Motion-PRO] Preliminary support for the Motion-PRO board.
6578
6579commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
6580Author: Stefan Roese <[email protected]>
6581Date: Wed Feb 7 16:51:08 2007 +0100
6582
6583 [PATCH] Update some AMCC 4xx board config files (set initrd_high)
6584
6585 Some boards that can have more than 768MBytes of SDRAM need to
6586 set "initrd_high", so that the initrd can be accessed by the
6587 Linux kernel.
6588
6589 Signed-off-by: Stefan Roese <[email protected]>
6590
6591commit 7372ca68227930d03cffa548310524cad5b96733
6592Author: Stefan Roese <[email protected]>
6593Date: Fri Feb 2 12:44:22 2007 +0100
6594
6595 [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
6596
6597 Previously the strapping DCR/SDR was read to determine if the internal PCI
6598 arbiter is enabled or not. This strapping bit can be overridden, so now
6599 the current status is read from the correct DCR/SDR register.
6600
6601 Signed-off-by: Stefan Roese <[email protected]>
6602
6603commit 2aa54f651a42d198673318f07a20c89a43e4d197
6604Author: Stefan Roese <[email protected]>
6605Date: Fri Feb 2 12:42:08 2007 +0100
6606
6607 [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
6608
6609 Signed-off-by: Stefan Roese <[email protected]>
6610
6611commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
6612Author: Stefan Roese <[email protected]>
6613Date: Thu Feb 1 13:22:41 2007 +0100
6614
6615 [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
6616
6617 When PCI PNP is enabled the pci pnp configuration routine is called
6618 which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
6619 problems with some PCI cards. For now disable the PCI PNP configuration.
6620
6621 Signed-off-by: Stefan Roese <[email protected]>
6622
6623commit 2902fadade3be7659467e8d074048c6b7068f5c0
6624Author: Stefan Roese <[email protected]>
6625Date: Wed Jan 31 16:56:10 2007 +0100
6626
6627 [PATCH] Update 440EPx/440GRx cpu detection
6628
6629 Signed-off-by: Stefan Roese <[email protected]>
6630
6631commit d5ea287b02a6945c3977410e364a879dd1a555c8
6632Author: Stefan Roese <[email protected]>
6633Date: Wed Jan 31 16:38:04 2007 +0100
6634
6635 [PATCH] Update esd cpci5200 files
6636
6637 Signed-off-by: Reinhard Arlt <[email protected]>
6638
6639commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
6640Author: Stefan Roese <[email protected]>
6641Date: Wed Jan 31 16:37:34 2007 +0100
6642
6643 [PATCH] Add support for esd mecp5200 board
6644
6645 Signed-off-by: Reinhard Arlt <[email protected]>
6646
6647commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
6648Author: Stefan Roese <[email protected]>
6649Date: Wed Jan 31 12:38:50 2007 +0100
6650
6651 [PATCH] Remove unneccessary yellowstone board config file
6652
6653 Signed-off-by: Stefan Roese <[email protected]>
6654
6655commit e802594b6fa1b166308820c276b96dc0d7cc731c
6656Author: Stefan Roese <[email protected]>
6657Date: Tue Jan 30 17:06:10 2007 +0100
6658
6659 [PATCH] Update Sequoia (440EPx) config file
6660
6661 The config file now handles the 2nd target, the Rainier (440GRx)
6662 evaluation board better. Additionally the PPC input clock was
6663 adjusted to match the correct value of 33.0 MHz.
6664
6665 Signed-off-by: Stefan Roese <[email protected]>
6666
6667commit 700200c67e73b83751418abe7815840dca8fd6cb
6668Author: Stefan Roese <[email protected]>
6669Date: Tue Jan 30 17:04:19 2007 +0100
6670
6671 [PATCH] Merge Yosemite & Yellowstone board ports
6672
6673 Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
6674 share one config file and all board specific files. This way we
6675 don't have to maintain two different sets of files for nearly
6676 identical boards.
6677
6678 Signed-off-by: Stefan Roese <[email protected]>
6679
6680commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
6681Author: Stefan Roese <[email protected]>
6682Date: Tue Jan 30 15:01:49 2007 +0100
6683
6684 [PATCH] Update Prodrive SCPU (PDNB3 variant) board
6685
6686 SCPU doesn't use redundant environment in flash.
6687
6688 Signed-off-by: Stefan Roese <[email protected]>
6689
6690commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
6691Author: Stefan Roese <[email protected]>
6692Date: Tue Jan 30 12:51:07 2007 +0100
6693
6694 [PATCH] alpr: Update alpr board config file
6695
6696 Signed-off-by: Stefan Roese <[email protected]>
6697
6698commit f8db84f132b1e335f20f96138a1f09ed97b08664
6699Author: Wolfgang Denk <[email protected]>
6700Date: Tue Jan 30 00:50:40 2007 +0100
6701
6702 LPC2292 SODIMM port coding style cleanup.
6703
f8db84f1
WD		 6704commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
6705Author: Gary Jennejohn <[email protected]>
6706Date: Wed Jan 24 12:16:56 2007 +0100
6707
6708 Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
6709
6710commit 2daf046ba627f85f44195815778140039636244e
6711Author: Bartlomiej Sieka <[email protected]>
6712Date: Tue Jan 23 17:22:06 2007 +0100
6713
6714 [iDMR] Add MTD and JFFS2 support, also add default partition definition.
6715
6716commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
6717Author: Bartlomiej Sieka <[email protected]>
6718Date: Tue Jan 23 14:21:14 2007 +0100
6719
6720 [iDMR] Flash driver on initialisation write-protects some sectors,
6721 currently sectors 0-3. Sector 3 does not need to be protected, though
6722 (U-boot occupies sectors 0-1 and the environment sector 2). This commit
6723 fixes this, i.e., only sectors 0-2 are protected.
6724
6725commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
6726Author: Bartlomiej Sieka <[email protected]>
6727Date: Tue Jan 23 14:11:22 2007 +0100
6728
6729 [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
6730 "mii device" results in "Unexpected exception"). Fixing this properly
6731 requires some clean-up in the FEC drivers infrastructure for ColdFire, so
6732 this commit disables MII commads for now.
6733
6734commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
6735Author: Bartlomiej Sieka <[email protected]>
6736Date: Tue Jan 23 13:25:22 2007 +0100
6737
6738 [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
6739 Identification Register (CIR).
6740
2a26ec47
WD		 6741commit fdef388758506765d4d6a7155c8f1584c63ff581
6742Author: roy zang <[email protected]>
6743Date: Mon Jan 22 13:19:21 2007 +0800
6744
6745 use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
6746 The patch by Heiko Schocher <[email protected]> on Jan, 19, 2007
6747 fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
6748 mpc7448hpc2 board.
6749
f8db84f1
WD		 6750commit a4012396645533aef218354eeba754dff0deace8
6751Author: Wolfgang Denk <[email protected]>
6752Date: Fri Jan 19 23:08:39 2007 +0100
6753
6754 Minor code cleanup.
6755
a4012396
WD		 6756commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
6757Author: Heiko Schocher <[email protected]>
6758Date: Fri Jan 19 19:57:10 2007 +0100
6759
6760 [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
6761
6762 Signed-off-by: Heiko Schocher <[email protected]>
6763
6764commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
6765Author: Heiko Schocher <[email protected]>
6766Date: Fri Jan 19 18:05:26 2007 +0100
6767
6768 [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
6769 if you must swap the bytes between reading/writing.
6770 (Needed for the SC3 board)
6771
6772 Signed-off-by: Heiko Schocher <[email protected]>
6773
6774commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
6775Author: Stefan Roese <[email protected]>
6776Date: Thu Jan 18 16:05:47 2007 +0100
6777
6778 [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
6779
6780 Signed-off-by: Stefan Roese <[email protected]>
6781
6782commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
6783Author: Stefan Roese <[email protected]>
6784Date: Thu Jan 18 11:54:52 2007 +0100
6785
6786 [PATCH] Update Prodrive P3Mx support
6787
6788 Signed-off-by: Stefan Roese <[email protected]>
6789
6790commit 34167a36c29ee946b727465db5c014746a08e978
6791Author: Stefan Roese <[email protected]>
6792Date: Thu Jan 18 11:48:10 2007 +0100
6793
6794 [PATCH] Add missing Taishan config file
6795
6796 Signed-off-by: Stefan Roese <[email protected]>
6797
6798commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
6799Author: Heiko Schocher <[email protected]>
6800Date: Thu Jan 18 11:28:51 2007 +0100
6801
6802 [PATCH] Fix: Compilerwarnings for SC3 board.
6803 The EBC Configuration Register is now by CFG_EBC_CFG definable
6804 Added JFFS2 support for the SC3 board.
6805
6806 Signed-off-by: Heiko Schocher <[email protected]>
6807
6808commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
6809Author: Stefan Roese <[email protected]>
6810Date: Thu Jan 18 10:25:34 2007 +0100
6811
6812 [PATCH] Add support for AMCC Taishan PPC440GX eval board
6813
6814 Signed-off-by: Stefan Roese <[email protected]>
6815
6816commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
6817Author: Wolfgang Denk <[email protected]>
6818Date: Tue Jan 16 18:30:50 2007 +0100
6819
6820 Raname solidcard3 into sc3; add redundant env for sc3
6821
6d3e0107
WD		 6822commit 1bbbbdd20fcec9933697000dcf55ff7972622596
6823Author: Wolfgang Denk <[email protected]>
6824Date: Tue Jan 16 12:46:35 2007 +0100
6825
6826 Update default environment for Solidcard3
6827
f11033e7
WD		 6828commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
6829Author: Stefan Roese <[email protected]>
6830Date: Mon Jan 15 09:46:29 2007 +0100
6831
6832 [PATCH] Fix 440SPe rev B detection from previous patch
6833
6834 Signed-off-by: Stefan Roese <[email protected]>
6835
6836commit a443d31410c571ee8f970da819a44d698fdd6b1f
6837Author: Heiko Schocher <[email protected]>
6838Date: Sun Jan 14 13:35:31 2007 +0100
6839
6840 [FIX] correct I2C Writes for the LM81 Sensor.
6841
6842 Signed-off-by: Heiko Schocher <[email protected]>
6843
6844commit 0bba5452835f19a61204edcda3a58112fd8e2208
6845Author: Wolfgang Denk <[email protected]>
6846Date: Sat Jan 13 11:17:10 2007 +0100
6847
6848 Undo commit 3033ebb2: reset command does not take any arguments
6849
6850 Haiying Wang's modification to the reset command was broken, undo it.
6851
6852 Signed-off-by: Wolfgang Denk <[email protected]>
6853
6854commit 95981778cff0038fd9941044d6a3eda810e33258
6855Author: Stefan Roese <[email protected]>
6856Date: Sat Jan 13 08:01:03 2007 +0100
6857
6858 [PATCH] Update 440SP(e) cpu revisions
6859
6860 Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
6861
6862 Signed-off-by: Stefan Roese <[email protected]>
6863
6864commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
6865Author: Stefan Roese <[email protected]>
6866Date: Sat Jan 13 07:59:56 2007 +0100
6867
6868 [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
6869
6870 Now the board revision and the current PCI bus speed are printed after
6871 the board message.
6872
6873 Also the EBC initialising is now done via defines in the board config
6874 file.
6875
6876 Signed-off-by: Stefan Roese <[email protected]>
6877
6878commit 36adff362c2c0141ff8a810d42a7e478f779130f
6879Author: Stefan Roese <[email protected]>
6880Date: Sat Jan 13 07:59:19 2007 +0100
6881
6882 [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
6883
6884 Now the board revision and the current PCI bus speed are printed after
6885 the board message.
6886
6887 Also the EBC initialising is now done via defines in the board config
6888 file.
6889
6890 Signed-off-by: Stefan Roese <[email protected]>
6891
6892commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
6893Author: Stefan Roese <[email protected]>
6894Date: Sat Jan 13 07:57:51 2007 +0100
6895
6896 [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
6897
6898 Now the board revision and the current PCI bus speed are printed after
6899 the board message.
6900
6901 Signed-off-by: Stefan Roese <[email protected]>
6902
6d3e0107
WD		 6903commit ca43ba18e910206ef8063e4b22d282630bff3fd2
6904Author: Heiko Schocher <[email protected]>
6905Date: Thu Jan 11 15:44:44 2007 +0100
6906
6907 Added support for the SOLIDCARD III board from Eurodesign
6908
6909 Signed-off-by: Heiko Schocher <[email protected]>
6910
f11033e7
WD		 6911commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
6912Author: Reinhard Thies <[email protected]>
6913Date: Wed Jan 10 14:41:14 2007 +0100
6914
6915 Adjusted default environment for cam5200 board.
6916
6917commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
6918Author: Wolfgang Denk <[email protected]>
6919Date: Wed Jan 10 15:35:52 2007 +0100
6920
6921 Update CHANGELOG
6922
bab5a90d
WD		 6923commit 787fa15860a57833e50bd30555079a9cd4e519b8
6924Author: Wolfgang Denk <[email protected]>
6925Date: Wed Jan 10 01:28:39 2007 +0100
6926
6927 Fix auto_update for MCC200 board.
6928
6929 The invocation of do_auto_update() is moved to the end of the
6930 misc_init_r() function, after the flash mappings have been
6931 initialized. Please find attached a patch that implements that
6932 change.
6933
6934 Also correct the decoding of the keypad status. With this update, the
6935 key that will trigger the update is Column 2, Row 2.
6936
f11033e7
WD		 6937commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
6938Author: Marian Balakowicz <[email protected]>
6939Date: Wed Jan 10 00:26:15 2007 +0100
6940
6941 CAM5200 flash driver modifications:
6942 - use CFI driver (replaces custom flash driver) for main 'cam5200' target
6943 - add second build target 'cam5200_niosflash' which still uses custom driver
6944
bab5a90d
WD		 6945commit 67fea022fa957f59653b5238c7496f80a6b70432
6946Author: Markus Klotzbuecher <[email protected]>
6947Date: Tue Jan 9 16:02:48 2007 +0100
6948
6949 SPC1920: cleanup memory contoller setup
6950
6951commit 8fc2102faa23593c80381437c09f7745a14deb40
6952Author: Markus Klotzbuecher <[email protected]>
6953Date: Tue Jan 9 14:57:14 2007 +0100
6954
6955 Fix the cpu speed setup to work with all boards.
6956
6957commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
6958Author: Markus Klotzbuecher <[email protected]>
6959Date: Tue Jan 9 14:57:13 2007 +0100
6960
6961 SPC1920: add support for the FM18L08 Ramtron FRAM
6962
6963commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
6964Author: Markus Klotzbuecher <[email protected]>
6965Date: Tue Jan 9 14:57:13 2007 +0100
6966
6967 SPC1920: update the HPI register addresses to work with the second
6968 generation of hardware
6969
6970commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
6971Author: Markus Klotzbuecher <[email protected]>
6972Date: Tue Jan 9 14:57:13 2007 +0100
6973
6974 Miscellanious spc1920 related cleanups
6975
6976commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
6977Author: Markus Klotzbuecher <[email protected]>
6978Date: Tue Jan 9 14:57:12 2007 +0100
6979
6980 SPC1920 GO/NOGO led should be set to color red in U-Boot
6981
6982commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
6983Author: Markus Klotzbuecher <[email protected]>
6984Date: Tue Jan 9 14:57:12 2007 +0100
6985
6986 Add support for the DS3231 RTC
6987
6988commit 8139567b60d678584b05f0718a681f2047c5e14f
6989Author: Markus Klotzbuecher <[email protected]>
6990Date: Tue Jan 9 14:57:11 2007 +0100
6991
6992 SMC1 uses external CLK4 instead of BRG on spc1920
6993
6994commit d8d9de1a02fbd880b613d607143d1f57342affc7
6995Author: Markus Klotzbuecher <[email protected]>
6996Date: Tue Jan 9 14:57:10 2007 +0100
6997
6998 Update the SPC1920 CMB PLD driver
6999
7000commit 3f34f869162750e5e999fd140f884f5de952bcfe
7001Author: Markus Klotzbuecher <[email protected]>
7002Date: Tue Jan 9 14:57:10 2007 +0100
7003
7004 Add / enable I2C support on the spc1920 board
7005
7006commit d28707dbce1e9ac2017ad051da4133bf22b4204f
7007Author: Markus Klotzbuecher <[email protected]>
7008Date: Tue Jan 9 14:57:10 2007 +0100
7009
7010 Add support for the tms320671x host port interface (HPI)
7011
7012commit f4eb54529bb3664c3a562e488b460fe075f79d67
7013Author: Wolfgang Denk <[email protected]>
7014Date: Sun Jan 7 00:13:11 2007 +0100
7015
7016 Prepare for release 1.2.0
7017
f4eb5452
WD		 7018commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
7019Author: Stefan Roese <[email protected]>
7020Date: Sat Jan 6 15:58:09 2007 +0100
7021
7022 [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
7023
7024 This patch fixes a problem with an incorrect setup for the refresh
7025 timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
7026
7027 Signed-off-by: Stefan Roese <[email protected]>
7028
7029commit f16c1da9577f06c5fc08651a4065537407de4635
7030Author: Stefan Roese <[email protected]>
7031Date: Sat Jan 6 15:56:13 2007 +0100
7032
7033 [PATCH] Update ALPR board files
7034
7035 This update brings the ALPR board support to the newest version.
7036 It also fixes a problem with the NAND driver.
7037
7038 Signed-off-by: Stefan Roese <[email protected]>
7039
7040commit cd1d937f90250a32988c37b2b4af8364d25de8ed
7041Author: Stefan Roese <[email protected]>
7042Date: Fri Jan 5 11:46:05 2007 +0100
7043
7044 [PATCH] nand: Fix problem with oobsize calculation
7045
7046 Here the description from Brian Brelsford <[email protected]>:
7047
7048 The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
7049 returns a 0x15. In the code fragment below bits [1:0] determine the
7050 page size, it is ANDed via "(extid & 0x3)" then shifted out. The
7051 next field is also ANDed with 0x3. However this is a one bit field
7052 as defined in the Hynix and Samsung parts in the 4th ID byte that
7053 determins the oobsize, not a two bit field. It works on Samsung as
7054 bits[3:2] are 01. However for the Hynix there is a 11 in these two
7055 bits, so the oob size gets messed up.
7056
7057 I checked the correct linux code and the suggested fix from Brian is
7058 also available in the linux nand mtd driver.
7059
7060 Signed-off-by: Stefan Roese <[email protected]>
7061
7062commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
7063Author: Stefan Roese <[email protected]>
7064Date: Fri Jan 5 10:40:36 2007 +0100
7065
7066 [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
7067
7068 This fix will make the MAL burst disabling patch for the Linux
7069 EMAC driver obsolete.
7070
7071 Signed-off-by: Stefan Roese <[email protected]>
7072
7073commit 023889838282b6237b401664f22dd22dfba2c066
7074Author: Stefan Roese <[email protected]>
7075Date: Fri Jan 5 10:38:05 2007 +0100
7076
7077 [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
7078
7079 This code will optimize the DDR2 controller setup on a board specific
7080 basis.
7081
7082 Note: This code doesn't work right now on the NAND booting image for the
7083 Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
7084
7085 Signed-off-by: Stefan Roese <[email protected]>
7086
7087commit cce4acbb68398634b8d011ed7bb0d12269c84230
7088Author: Bartlomiej Sieka <[email protected]>
7089Date: Thu Dec 28 19:08:21 2006 +0100
7090
7091 Few V38B changes:
7092 - fix a typo in V38B config file
7093 - move watchdog initialisation earlier in the boot process
7094 - add "wdt=off" to default kernel command line (disables kernel watchdog)
7095
7096commit 92eb729bad876725aeea908d2addba0800620840
7097Author: Wolfgang Denk <[email protected]>
7098Date: Wed Dec 27 01:26:13 2006 +0100
7099
7100 Fix bug in adaption of Stefano Babic's CFI driver patch.
7101
7102commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
7103Author: Wolfgang Denk <[email protected]>
7104Date: Sun Dec 24 01:42:57 2006 +0100
7105
7106 Minor code cleanup.
7107
7108commit d784fdb05900ada3686d5778783e1fb328e9fb66
7109Author: Stefano Babic <[email protected]>
7110Date: Tue Dec 12 00:22:42 2006 +0100
7111
7112 Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
7113
7114commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
7115Author: Stefan Roese <[email protected]>
7116Date: Fri Dec 22 14:29:40 2006 +0100
7117
7118 [PATCH] Fix sequoia flash autodetection (finally correct)
7119
7120 Now 32MByte and 64MByte FLASH is know to work and other
7121 configurations should work too.
7122
7123 Signed-off-by: Stefan Roese <[email protected]>
7124
7125commit 82e5236a8b719543643fd26d5827938ab2b94818
7126Author: Wolfgang Denk <[email protected]>
7127Date: Fri Dec 22 10:30:26 2006 +0100
7128
7129 Minor code cleanup; update CHANGELOG.
7130
7131commit fa23044564091f05d9695beb7b5b9a931e7f41a4
7132Author: Heiko Schocher <[email protected]>
7133Date: Thu Dec 21 17:17:02 2006 +0100
7134
7135 Added support for the TQM8272 board from TQ
7136
7137 Signed-off-by: Heiko Schocher <[email protected]>
7138
f11033e7
WD		 7139commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
7140Author: Heiko Schocher <[email protected]>
7141Date: Thu Dec 21 16:14:48 2006 +0100
7142
7143 [PATCH] Add support for the UC101 board from MAN.
7144
7145 Signed-off-by: Heiko Schocher <[email protected]>
7146
82e5236a
WD		 7147commit c84bad0ef60e7055ab0bd49b93069509cecc382a
7148Author: Bartlomiej Sieka <[email protected]>
7149Date: Wed Dec 20 00:29:43 2006 +0100
7150
7151 Fix to make the baudrate changes immediate for the MCF52x2 family.
7152
7153commit daa6e418bcc0c717752e8de939c213c790286096
7154Author: Bartlomiej Sieka <[email protected]>
7155Date: Wed Dec 20 00:27:32 2006 +0100
7156
7157 Preliminary support for the iDMR board (ColdFire).
7158
7159commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
7160Author: Andrei Safronov <[email protected]>
7161Date: Fri Dec 8 16:23:08 2006 +0100
7162
7163 automatic update mechanism
7164
2a26ec47
WD		 7165commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
7166Author: roy zang <[email protected]>
7167Date: Mon Dec 4 17:56:59 2006 +0800
7168
7169 Slight code clean up.
7170 Add comments, delete duplicate define and remove spaces.
7171 Signed-off-by: Roy Zang <[email protected]>
7172
7173commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
7174Author: roy zang <[email protected]>
7175Date: Mon Dec 4 17:54:21 2006 +0800
7176
7177 Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
7178 multiplier table can not refect the real PLL clock behavior of these
7179 processors. Please refer to the hardware specification for detailed
7180 information of the corresponding processors.
7181 Signed-off-by: Roy Zang <[email protected]>
7182
7183commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
7184Author: roy zang <[email protected]>
7185Date: Mon Dec 4 14:46:23 2006 +0800
7186
7187 Remove the static MAC address, ip address, server ip, netmask and
7188 gateway ip for network setting.
7189 Signed-off-by: Roy Zang <[email protected]>
7190
7191commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
7192Author: roy zang <[email protected]>
7193Date: Mon Dec 4 14:33:08 2006 +0800
7194
7195 Remove the duplicate memory test code for mpc744ihpc2 board.
7196 If a memory test is needed, please use the functions in
7197 post/memory.c or memtest command.
7198 Signed-off-by: Roy Zang <[email protected]>
7199
7200commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
7201Author: roy zang <[email protected]>
7202Date: Fri Dec 1 19:01:25 2006 +0800
7203
7204 Fix the exception occuring in RAM table search issue.
7205 The original search_one_table() function code can only processes the search
7206 for the exception occurring in FLASH/ROM, because the exception and fixup
7207 table usually locate in FLASH. If the exception address is also in
7208 FLASH, it will be OK.
7209 If the exception occurs in RAM, after the u-boot relocation, a
7210 relocation offset should be added.
7211
7212 clean up the code in cpu/74xx_7xx/cpu.c
7213
7214 Signed-off-by: Roy Zang <[email protected]>
7215
7216commit ee311214e0d216f904feea269599d0934bf71f23
7217Author: roy zang <[email protected]>
7218Date: Fri Dec 1 11:47:36 2006 +0800
7219
7220 Clean up the code according to codestyle:
7221 (1) remove some C++ comments.
7222 (2) remove trailing white space.
7223 (3) remove trailing empty line.
7224 (4) Indentation by table.
7225 (5) remove {} in one line condition.
7226 (6) add space before '(' in function call.
7227 Remove some weird printf () output.
7228 Add necessary comments.
7229 Modified Makefile to support building in a separate directory.
7230
82e5236a
WD		 7231commit dd520bf314c7add4183c5191692180f576f96b60
7232Author: Wolfgang Denk <[email protected]>
7233Date: Thu Nov 30 18:02:20 2006 +0100
7234
7235 Code cleanup.
7236
dd520bf3
WD		 7237commit 8d9a8610b8256331132227e9e6585c6bd5742787
7238Author: Wolfgang Denk <[email protected]>
7239Date: Thu Nov 30 01:54:07 2006 +0100
7240
7241 Code cleanup. Update CHANGELOG.
7242
8d9a8610
WD		 7243commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
7244Author: Grant Likely <[email protected]>
7245Date: Wed Nov 29 16:23:42 2006 +0100
7246
7247 [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
7248
7249 The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
7250 not the XLB frequency.
7251
7252 This patch depends on the previous patches for MPC52xx device tree support
7253
7254 Signed-off-by: Grant Likely <[email protected]>
7255 Signed-off-by: Sylvain Munaut <[email protected]>
7256
7257commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
7258Author: Stefan Roese <[email protected]>
7259Date: Wed Nov 29 15:42:37 2006 +0100
7260
7261 [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
7262
7263 This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
7264 and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
7265 quite similar and share the same board directory "prodrive/p3mx"
7266 and the same config file "p3mx.h".
7267
7268 Signed-off-by: Stefan Roese <[email protected]>
7269
7270commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
7271Author: Stefan Roese <[email protected]>
7272Date: Wed Nov 29 12:53:15 2006 +0100
7273
7274 [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
7275
7276 In the bootvx command the load address was only read from the env
7277 variable "loadaddr" and not optionally passed as paramter as described
7278 in the help. This is fixed with this patch. The behaviour is now the
7279 same as in the bootelf command.
7280
7281 Signed-off-by: Stefan Roese <[email protected]>
7282
7283commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
7284Author: Stefan Roese <[email protected]>
7285Date: Wed Nov 29 12:03:57 2006 +0100
7286
7287 [PATCH] include/ppc440.h minor error affecting interrupts
7288
7289 Fixed include/ppc440.c for UIC address Bug
7290
7291 Corrects bug affecting the addresses for the universal interrupt
7292 controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
7293
7294 Signed-off-by: Jeff Mann <[email protected]>
7295 Signed-off-by: Stefan Roese <[email protected]>
7296
dd520bf3
WD		 7297commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
7298Author: Joakim Tjernlund <[email protected]>
7299Date: Tue Nov 28 16:17:27 2006 -0600
7300
7301 Make fsl-i2c not conflict with SOFT I2C
7302
7303 Signed-off-by: Timur Tabi <[email protected]>
7304
7305commit 14198bf768fdc958e3c1afd2404e5262208e98d7
7306Author: Joakim Tjernlund <[email protected]>
7307Date: Tue Nov 28 16:17:18 2006 -0600
7308
7309 Fix I2C master address initialization.
7310
7311 Signed-off-by: Timur Tabi <[email protected]>
7312
7313commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
7314Author: Kim Phillips <[email protected]>
7315Date: Tue Nov 28 23:31:19 2006 -0600
7316
7317 Assign maintainers for mpc8349emds and mpc8360emds
7318
7319 Dave for mpc8360emds, and me for mpc8349emds.
7320
7321commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
7322Author: Kim Phillips <[email protected]>
7323Date: Tue Nov 28 23:28:33 2006 -0600
7324
7325 Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
7326
7327 give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
7328 since they are passed by reference to ucc_get_cmxucr_reg and assigned.
7329
7330commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
7331Author: Timur Tabi <[email protected]>
7332Date: Tue Nov 28 12:09:35 2006 -0600
7333
7334 mpc83xx: Miscellaneous code style fixes
7335
7336 Implement various code style fixes and similar changes.
7337
7338 Signed-off-by: Timur Tabi <[email protected]>
7339
8d9a8610
WD		 7340commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
7341Author: Stefan Roese <[email protected]>
7342Date: Tue Nov 28 17:55:49 2006 +0100
7343
7344 [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
7345
7346 This patch adds the code and configuration necessary to boot with an
7347 arch/powerpc Linux kernel.
7348
7349 Signed-off-by: Grant Likely <[email protected]>
7350 Acked-by: Jon Loeliger <[email protected]>
7351
7352commit e732faec95a83cb468b4850ae807c8301dde8f6a
7353Author: Stefan Roese <[email protected]>
7354Date: Tue Nov 28 16:09:24 2006 +0100
7355
7356 [PATCH] PPC4xx: 440SP Rev. C detection added
7357
7358 Signed-off-by: Stefan Roese <[email protected]>
7359
7360commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
7361Author: Stefan Roese <[email protected]>
7362Date: Tue Nov 28 11:04:45 2006 +0100
7363
7364 [PATCH] nand: Fix patch merge problem
7365
7366 Signed-off-by: Stefan Roese <[email protected]>
7367
2a8dfe08
WD		 7368commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
7369Author: Stefan Roese <[email protected]>
7370Date: Tue Nov 28 11:04:45 2006 +0100
7371
7372 [PATCH] nand: Fix patch merge problem
7373
7374 Signed-off-by: Stefan Roese <[email protected]>
7375
d2c83f54
WD		 7376commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
7377Author: Wolfgang Denk <[email protected]>
7378Date: Mon Nov 27 22:53:53 2006 +0100
7379
7380 Update CHANGELOG
7381
4f4b602e
WD		 7382commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
7383Author: Stefan Roese <[email protected]>
7384Date: Mon Nov 27 17:43:25 2006 +0100
7385
7386 [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
7387
7388 Patch below corrects the setting of the zmiifer register, it was
7389 overwritting the register rather than ORing the settings.
7390
7391 Signed-off-by: Neil Wilson <[email protected]>
7392 Signed-off-by: Stefan Roese <[email protected]>
7393
7394commit d1a72545296800b7e219f93104ad5836f0003d66
7395Author: Stefan Roese <[email protected]>
7396Date: Mon Nov 27 17:34:10 2006 +0100
7397
7398 [PATCH] Select NAND embedded environment from board configuration
7399
7400 The current NAND Bootloader setup forces the environment
7401 variables to be in line with the bootloader. This change
7402 enables the configuration to be made in the board include
7403 file instead so that it can be individually enabled.
7404
7405 Signed-off-by: Nick Spence <[email protected]>
7406 Signed-off-by: Stefan Roese <[email protected]>
7407
7408commit 15784862857c3c2214498defcfed84ff137fb81e
7409Author: Stefan Roese <[email protected]>
7410Date: Mon Nov 27 17:22:19 2006 +0100
7411
7412 [PATCH] nand_wait() timeout fixes
7413
7414 Two fixes for the nand_wait() function in
7415 drivers/nand/nand_base.c:
7416
7417 1. Use correct timeouts. The original timeouts in Linux
7418 source are 400ms and 20ms not 40s and 20s
7419
7420 2. Return correct error value in case of timeout. 0 is
7421 interpreted as OK.
7422
7423 Signed-off-by: Rui Sousa <[email protected]>
7424 Signed-off-by: Stefan Roese <[email protected]>
7425
7426commit da5553b095bf04f4f109ad7e565dae3aba47b230
7427Author: Stefan Roese <[email protected]>
7428Date: Mon Nov 27 17:04:06 2006 +0100
7429
7430 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
7431
7432 This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
f4eb5452 7433 arguments to bootm. It removes the getenv("disable_of") test that used
4f4b602e
WD		 7434 to be used for this purpose.
7435
7436 Signed-off-by: Grant Likely <[email protected]>
7437 Acked-by: Jon Loeliger <[email protected]>
7438
7439commit a9398e018593782c5fa7d0741955fc1256b34c1e
7440Author: Wolfgang Denk <[email protected]>
7441Date: Mon Nov 27 15:32:42 2006 +0100
7442
7443 Minor code cleanup. Update CHANGELOG.
7444
8d9a8610
WD		 7445commit 1729b92cde575476684bffe819d0b7791b57bff2
7446Author: Stefan Roese <[email protected]>
7447Date: Mon Nov 27 14:52:04 2006 +0100
7448
7449 [PATCH] 4xx: Fix problem with board specific reset code (now for real)
7450
7451 Signed-off-by: Stefan Roese <[email protected]>
7452
7453commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
7454Author: Stefan Roese <[email protected]>
7455Date: Mon Nov 27 14:49:51 2006 +0100
7456
7457 [PATCH] alpr: remove unused board specific flash driver
7458
7459 Signed-off-by: Stefan Roese <[email protected]>
7460
7461commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
7462Author: Stefan Roese <[email protected]>
7463Date: Mon Nov 27 14:48:41 2006 +0100
7464
7465 [PATCH] 4xx: Fix problem with board specific reset code
7466
7467 Signed-off-by: Stefan Roese <[email protected]>
7468
7469commit ec0c2ec725aec9524a177a77ce75559e644a931a
7470Author: Stefan Roese <[email protected]>
7471Date: Mon Nov 27 14:46:06 2006 +0100
7472
7473 [PATCH] Remove testing 4xx enet PHY setup
7474
7475 Signed-off-by: Stefan Roese <[email protected]>
7476
7477commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
7478Author: Stefan Roese <[email protected]>
7479Date: Mon Nov 27 14:12:17 2006 +0100
7480
7481 [PATCH] Update Prodrive ALPR board support (440GX)
7482
7483 Signed-off-by: Stefan Roese <[email protected]>
7484
9986bc3e
WD		 7485commit 58b485776698c3d71ec5a215e392123b4c15afa3
7486Author: Markus Klotzbuecher <[email protected]>
7487Date: Mon Nov 27 11:51:21 2006 +0100
7488
7489 Add a small README with information on the generic ohci driver.
7490
7491commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f
7492Author: Markus Klotzbuecher <[email protected]>
7493Date: Mon Nov 27 11:46:46 2006 +0100
7494
7495 Fix some endianness issues related to the generic ohci driver
7496
7497commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418
7498Author: Markus Klotzbuecher <[email protected]>
7499Date: Mon Nov 27 11:44:58 2006 +0100
7500
7501 Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
7502 to choose between the old and the generic OHCI drivers.
7503
7504commit 53e336e9ffc51035bdc4e5867631b3378761b4df
7505Author: Markus Klotzbuecher <[email protected]>
7506Date: Mon Nov 27 11:43:09 2006 +0100
7507
7508 Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
7509 and adapted board configs TQM5200 and yosemite accordingly. This commit
7510 also makes the maximum number of root hub ports configurable
7511 (CFG_USB_OHCI_MAX_ROOT_PORTS).
7512
a9398e01
WD		 7513commit 78d620ebb5871d252270dedfad60c6568993b780
7514Author: Wolfgang Denk <[email protected]>
7515Date: Thu Nov 23 22:58:58 2006 +0100
7516
7517 Updates for TQM5200 modules:
7518 - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
7519 - simplify "udate" definitions
7520
7521commit 2053283304eeddf250d109e6791eb6fa4cad14f7
7522Author: Stefan Roese <[email protected]>
7523Date: Wed Nov 22 13:20:50 2006 +0100
7524
7525 [PATCH] PPC4xx start.S: Fix for processor errata
7526
7527 Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
7528 errata 1.12: 440_33 by moving patch up in code.
7529
7530 Signed-off-by: Jeff Mann <[email protected]>
7531 Signed-off-by: Stefan Roese <[email protected]>
7532
7533commit 4ef6251403f637841000e0fef9e832aa01339822
7534Author: Stefan Roese <[email protected]>
7535Date: Mon Nov 20 20:39:52 2006 +0100
7536
7537 [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
7538
7539 Signed-off-by: Stefan Roese <[email protected]>
7540
7541commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
7542Author: Wolfgang Denk <[email protected]>
7543Date: Mon Nov 20 10:28:30 2006 +0100
7544
7545 Update CHANGELOG
7546
e4bbd8da
WD		 7547commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
7548Author: Stefan Roese <[email protected]>
7549Date: Mon Nov 13 13:55:24 2006 +0100
7550
7551 [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
7552
7553 * Adds support for AMD command set Top Boot flash geometry reversal
7554 * Adds support for reading JEDEC Manufacturer ID and Device ID
7555 * Adds support for displaying command set, manufacturer id and
7556 device ids (flinfo)
7557 * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
7558 * Removes outdated change history (refer to git log instead)
7559
7560 Signed-off-by: Tolunay Orkun <[email protected]>
7561 Signed-off-by: Stefan Roese <[email protected]>
7562
7563commit b21b511d4c50408f4853f46f06b601272196223f
7564Author: Wolfgang Denk <[email protected]>
7565Date: Sun Nov 12 21:13:23 2006 +0100
7566
7567 Update CHANGELOG
7568
b21b511d
WD		 7569commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
7570Author: Bartlomiej Sieka <[email protected]>
7571Date: Sat Nov 11 22:48:22 2006 +0100
7572
7573 Disable the watchdog in the default config for the V38B board.
7574
7575commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
7576Author: Bartlomiej Sieka <[email protected]>
7577Date: Sat Nov 11 22:43:00 2006 +0100
7578
7579 Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
7580 group is enabled for USB earlier (in cpu_init_f() instead of
7581 usb_lowlevel_init()).
7582
7583commit 91650b3e4de688038d4f71279c44858e3e2c6870
7584Author: Wolfgang Denk <[email protected]>
7585Date: Mon Nov 6 17:06:36 2006 +0100
7586
7587 Sequential accesses to non-existent memory must be synchronized,
7588 at least on G2 cores.
7589
7590 This fixes get_ram_size() problems on MPC5200 Rev. B boards.
7591
dd520bf3
WD		 7592commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
7593Author: Timur Tabi <[email protected]>
7594Date: Fri Nov 3 19:15:00 2006 -0600
7595
7596 mpc83xx: Update 83xx to use fsl_i2c.c
7597
7598 Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
7599 cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
7600 Added multiple I2C bus support to fsl_i2c.c.
7601
7602 Signed-off-by: Timur Tabi <[email protected]>
7603
7604commit d239d74b1c937984bc519083a8e7de373a390f06
7605Author: Timur Tabi <[email protected]>
7606Date: Fri Nov 3 12:00:28 2006 -0600
7607
7608 mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
7609
7610 Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
7611 tree matches the other 8xxx trees.
7612
7613 Signed-off-by: Timur Tabi <[email protected]>
7614
7615commit f7fb2e703ec9688541416962724adff70a7322cb
7616Author: Kim Phillips <[email protected]>
7617Date: Thu Nov 2 19:47:11 2006 -0600
7618
7619 mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
7620
7621commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
7622Author: Dave Liu <[email protected]>
7623Date: Thu Nov 2 18:05:50 2006 -0600
7624
7625 mpc83xx: Fix the incorrect dcbz operation
7626
7627 The 834x rev1.x silicon has one CPU5 errata.
7628
7629 The issue is when the data cache locked with
7630 HID0[DLOCK], the dcbz instruction looks like no-op inst.
7631
7632 The right behavior of the data cache is when the data cache
7633 Locked with HID0[DLOCK], the dcbz instruction allocates
7634 new tags in cache.
7635
7636 The 834x rev3.0 and later and 8360 have not this bug inside.
7637
7638 So, when 834x rev3.0/8360 are working with ECC, the dcbz
7639 instruction will corrupt the stack in cache, the processor will
7640 checkstop reset.
7641
7642 However, the 834x rev1.x can work with ECC with these code,
7643 because the sillicon has this cache bug. The dcbz will not
7644 corrupt the stack in cache.
7645 Really, it is the fault code running on fault sillicon.
7646
7647 This patch fix the incorrect dcbz operation. Instead of
7648 CPU FP writing to initialise the ECC.
7649
7650 CHANGELOG:
7651 * Fix the incorrect dcbz operation instead of CPU FP
7652 writing to initialise the ECC memory. Otherwise, it
7653 will corrupt the stack in cache, The processor will checkstop
7654 reset.
7655
7656 Signed-off-by: Dave Liu <[email protected]>
7657
7658commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
7659Author: Kim Phillips <[email protected]>
7660Date: Wed Nov 1 00:10:40 2006 -0600
7661
7662 mpc83xx: add OF_FLAT_TREE bits to 83xx boards
7663
7664 add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
7665 STDOUT_PATH configuration bits to mpc8349emds,
7666 mpc8349itx, and mpc8360emds board code.
7667
7668 redo environment to use bootm with the fdtaddr
7669 for booting ARCH=powerpc kernels by default,
7670 and provide default fdtaddr values.
7671
7672commit 48041365b3420589ad464ebc7752e0053538b729
7673Author: Kim Phillips <[email protected]>
7674Date: Wed Nov 1 00:07:25 2006 -0600
7675
7676 mpc83xx: change ft code to modify local-mac-address property
7677
7678 Update 83xx OF code to update local-mac-address properties
7679 for ethernet instead of the obsolete 'address' property.
7680
7681commit 9ca880a250870a7d55754291b5591d2b5fe89b54
7682Author: Timur Tabi <[email protected]>
7683Date: Tue Oct 31 21:23:16 2006 -0600
7684
7685 mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
7686
7687 This patch also adds an improved I2C set_speed(), which handles all clock
7688 frequencies.
7689
7690 Signed-off-by: Timur Tabi <[email protected]>
7691
7692commit ac4b5622ce050b5ee1e154b98df630d778661632
7693Author: Dave Liu <[email protected]>
7694Date: Tue Oct 31 19:54:59 2006 -0600
7695
7696 mpc83xx: add the README.mpc8360emds
7697
7698 add doc/README.mpc8360emds to accompany the new board support
7699
7700commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
7701Author: Dave Liu <[email protected]>
7702Date: Fri Nov 3 12:11:15 2006 -0600
7703
7704 mpc83xx: add QE ethernet support
7705
7706 this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
7707
7708commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
7709Author: Dave Liu <[email protected]>
7710Date: Fri Nov 3 19:33:44 2006 -0600
7711
7712 mpc83xx: Add MPC8360EMDS basic board support
7713
7714 Add support for the Freescale MPC8360EMDS board.
7715 Includes DDR, DUART, Local Bus, PCI.
7716
7717commit 23892e49352de74f7fac36ff90bb1be143d195e3
7718Author: Dave Liu <[email protected]>
7719Date: Tue Oct 31 19:30:40 2006 -0600
7720
7721 mpc83xx: add the QUICC Engine (QE) immap file
7722
7723 common QE immap file. Also required for 8360.
7724
7725commit b701652a4992bdcc62fb1a6038a85beef9e55da4
7726Author: Dave Liu <[email protected]>
7727Date: Tue Oct 31 19:25:38 2006 -0600
7728
7729 mpc83xx: Add 8360 specifics to 83xx immap
7730
7731 Mainly add QE device dependencies, with appropriate 8360 protection.
7732 Lindent also run.
7733
7734commit 988833324a7fda482c8ac3ca23eb539f8232e404
7735Author: Timur Tabi <[email protected]>
7736Date: Tue Oct 31 19:14:41 2006 -0600
7737
7738 mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
7739
7740 PREREQUISITE PATCHES:
7741
7742 * This patch can only be applied after the following patches have been applied:
7743
7744 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
7745 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
7746
7747 CHANGELOG:
7748
7749 * For the 8349E-mITX, fix some size values in pci_init_board(), enable
7750 the clock for the 2nd USB board (Linux kernel will hang otherwise),
7751 and fix the CONFIG_BOOTARGS macro.
7752
7753 Signed-off-by: Timur Tabi <[email protected]>
7754
7755commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
7756Author: Timur Tabi <[email protected]>
7757Date: Tue Oct 31 18:44:42 2006 -0600
7758
7759 mpc83xx: Add support for the MPC8349E-mITX
7760
7761 PREREQUISITE PATCHES:
7762
7763 * This patch can only be applied after the following patches have been applied:
7764
7765 1) DNX#2006090742000024 "Add support for multiple I2C buses"
7766 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
7767 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
7768 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
7769 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
7770
7771 CHANGELOG:
7772
7773 * Add support for the Freescale MPC8349E-mITX reference design platform.
7774 The second TSEC (Vitesse 7385 switch) is not supported at this time.
7775
7776 Signed-off-by: Timur Tabi <[email protected]>
7777
7778commit 183da6d9b446cc12123455844ad1187e2375626f
7779Author: Ben Warren <[email protected]>
7780Date: Tue Sep 12 10:15:53 2006 -0400
7781
7782 Additional MPC8349 support for multibus i2c
7783
7784 Hello,
7785
7786 Here is a patch for a file that was accidentally left out of a previous
7787 attempt.
7788
7789 It accompanies the patch with ticket DNX#2006090742000024
7790
7791 CHANGELOG:
7792 Change PCI initialization to use new multi-bus I2C API.
7793
7794 regards,
7795 Ben
7796
7797commit b24f119d672b709d153ff2ac091d4aa63ec6877d
7798Author: Ben Warren <[email protected]>
7799Date: Thu Sep 7 16:51:04 2006 -0400
7800
7801 Multi-bus I2C implementation of MPC834x
7802
7803 Hello,
7804
7805 Attached is a patch implementing multiple I2C buses on the MPC834x CPU
7806 family and the MPC8349EMDS board in particular.
7807 This patch requires Patch 1 (Add support for multiple I2C buses).
7808 Testing was performed on a 533MHz board.
7809
7810 /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
7811
7812 Signed-off-by: Ben Warren <[email protected]>
7813
7814 CHANGELOG:
7815 Implemented driver-level code to support two I2C buses on the
7816 MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
7817 are 50kHz, 100kHz and 400kHz on each bus.
7818
7819 regards,
7820 Ben
7821
7822commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
7823Author: Ben Warren <[email protected]>
7824Date: Thu Sep 7 16:50:54 2006 -0400
7825
7826 Add support for multiple I2C buses
7827
7828 Hello,
7829
7830 Attached is a patch providing support for multiple I2C buses at the
7831 command level. The second part of the patch includes an implementation
7832 for the MPC834x CPU and MPC8349EMDS board.
7833
7834 /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
7835
7836 Signed-off-by: Ben Warren <[email protected]>
7837
7838 Overview:
7839
7840 1. Include new 'i2c' command (based on USB implementation) using
7841 CONFIG_I2C_CMD_TREE.
7842
7843 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
7844 the commands to change bus number and speed are only available under the
7845 new 'i2c' command mentioned in the first bullet.
7846
7847 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
7848 systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
7849 of an array of bus-device pairs. Otherwise, it is an array of uchar.
7850
7851 CHANGELOG:
7852 Added new 'i2c' master command for all I2C interaction. This is
7853 conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
7854 setting I2C bus speed as well as changing the active bus if the board
7855 has more than one (conditionally compiled with
7856 CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
7857 Updated README.
7858
7859 regards,
7860 Ben
7861
7862commit bed85caf872714ebf53013967a695c9d63acfc68
7863Author: Timur Tabi <[email protected]>
7864Date: Tue Oct 31 18:13:36 2006 -0600
7865
7866 mpc83xx: Add support for Errata DDR6 on MPC 834x systems
7867
7868 CHANGELOG:
7869
7870 * Errata DDR6, which affects all current MPC 834x processors, lists changes
7871 required to maintain compatibility with various types of DDR memory. This
7872 patch implements those changes.
7873
7874 Signed-off-by: Timur Tabi <[email protected]>
7875
7876commit afd6e470f639883002c7c59d562690a5cb0f4865
7877Author: Timur Tabi <[email protected]>
7878Date: Wed Oct 25 18:45:23 2006 -0500
7879
7880 mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
7881
7882commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
7883Author: Timur Tabi <[email protected]>
7884Date: Tue Aug 22 17:07:00 2006 -0500
7885
7886 mpc83xx: Add support for variable flash memory sizes on 83xx systems
7887
7888 CHANGELOG:
7889
7890 * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
7891 window registers, instead of using a hard-coded value of 8MB.
7892
7893 Signed-off-by: Timur Tabi <[email protected]>
7894
7895commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
7896Author: Tanya Jiang <[email protected]>
7897Date: Thu Aug 3 18:38:13 2006 +0800
7898
7899 mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
7900
7901 Unified TQM834x variable names with 83xx and consolidated macro
7902 in preparation for the 8360 and other upcoming 83xx devices.
7903
7904 Signed-off-by: Tanya Jiang <[email protected]>
7905
7906commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
7907Author: Dave Liu <[email protected]>
7908Date: Wed Oct 25 14:41:21 2006 -0500
7909
7910 mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
7911
7912 Incorporated the common unified variable names and the changes in preparation
7913 for releasing mpc8360 patches.
7914
7915 Signed-off-by: Dave Liu <[email protected]>
7916
7917commit 3894c46c27c64891f93ac04edde86a9fa9758d92
7918Author: Tanya Jiang <[email protected]>
7919Date: Thu Aug 3 18:36:02 2006 +0800
7920
7921 mpc83xx: Fix missing build for mpc8349emds pci.c
7922
7923 Make pci build for mpc8349emds
7924
7925 Signed-off-by: Tanya Jiang <[email protected]>
7926
7927commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
7928Author: Tanya Jiang <[email protected]>
7929Date: Thu Aug 3 18:39:49 2006 +0800
7930
7931 mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
7932
7933 Removed unused file resetvec.S for mpc83xx cpu
7934
7935 Signed-off-by: Tanya Jiang <[email protected]>
7936
7937commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
7938Author: Nick Spence <[email protected]>
7939Date: Sat Sep 30 00:32:59 2006 -0700
7940
7941 NAND Flash verify across block boundaries
7942
7943 This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
7944 defined
7945 and the write crosses a block boundary. The pointer to the verification
7946 buffer (bufstart) is not being updated to reflect the starting of the
7947 new
7948 block so the verification of the second block fails.
7949
7950 CHANGELOG:
7951
7952 * Fix NAND FLASH page verification across block boundaries
7953
7954commit f484dc791a3932537213c43c654cc1295c64b84c
7955Author: Nick Spence <[email protected]>
7956Date: Thu Sep 7 07:39:46 2006 -0700
7957
7958 Added RGMII support to the TSECs and Marvell 881111 Phy
7959
7960 Added a phy initialization to adjust the RGMII RX and TX timing
7961 Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
7962
7963 Signed-off-by: Nick Spence <[email protected]>
7964
2a26ec47
WD		 7965commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
7966Author: roy zang <[email protected]>
7967Date: Fri Nov 3 13:10:00 2006 +0800
7968
7969 Remove some unused CFG define.
7970 undef CFG_DRAM_TEST
7971
7972commit 99c09c4dec34f77c243bf51bea532e3f339410ad
7973Author: roy zang <[email protected]>
7974Date: Fri Nov 3 13:07:36 2006 +0800
7975
7976 Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
7977 Both work. 0xFF000000 seems more reasonable.
7978
b21b511d
WD		 7979commit c59200443072353044aa4bf737a5a60f9a9af231
7980Author: Wolfgang Denk <[email protected]>
7981Date: Thu Nov 2 15:15:01 2006 +0100
7982
7983 Release U-Boot 1.1.6
7984
2a26ec47
WD		 7985commit c1fbe4103a0d6c8957f912af902d705ba67836f2
7986Author: roy zang <[email protected]>
7987Date: Thu Nov 2 19:14:48 2006 +0800
7988
7989 This patch comes from Yuli's posted patch on 8/8/2006
7990 titled "CFI Driver Little-Endian write Issue".
7991
7992 http://sourceforge.net/mailarchive/message.php?msg_id=36311999
7993
7994 If that patch applied, please discard this one.
7995 Until now , I do not see his patch is applied. So please apply this one.
7996
7997 Signed-off-by: Yuli Barcohen <[email protected]>
7998 Signed-off-by: Roy Zang <[email protected]>
7999
8000commit b825f158e449e1e9cf74c08e572955e122394c96
8001Author: roy zang <[email protected]>
8002Date: Thu Nov 2 19:12:31 2006 +0800
8003
8004 Tsi108 on chip i2c support.
8005
8006 The i2c Interface provides a master-only, serial interface that can be
8007 used for initializing Tsi108/Tsi109 registers from an EEPROM after a
8008 device reset.
8009
8010 Signed-off-by: Alexandre Bounine <[email protected]>
8011 Signed-off-by: Roy Zang <[email protected]>
8012
8013commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
8014Author: roy zang <[email protected]>
8015Date: Thu Nov 2 19:11:06 2006 +0800
8016
8017 Tsi108 on chip pci controller support.
8018
8019 If there is no pci card, the tsi108/109 pci configure read will
8020 cause a machine check exception to the processor. PCI error should
8021 also be cleared after the read.
8022
8023 Signed-off-by: Alexandre Bounine <[email protected]>
8024 Signed-off-by: Roy Zang <[email protected]>
8025
8026commit d1927cee977126e547ceeba23e4f978f377cfb8f
8027Author: roy zang <[email protected]>
8028Date: Thu Nov 2 19:08:55 2006 +0800
8029
8030 Tundra tsi108 on chip Ethernet controller support.
8031
8032 The following is a brief description of the Ethernet controller:
8033 The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
8034 Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
8035 to manage the two physical connection devices (PHYs). Each Ethernet port
8036 has its own statistics monitor that tracks and reports key interface
8037 statistics. Each port supports a 256-entry hash table for address
8038 filtering. In addition, each port is bridged to the Switch Fabric
8039 through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
8040
8041 Each Ethernet port also has a pair of internal Ethernet DMA channels to
8042 support the transmit and receive data flows. The Ethernet DMA channels
8043 use descriptors set up in memory, the memory map of the device, and
8044 access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
8045 handles arbitration for the Switch Fabric. The Controller also
8046 has a register businterface for register accesses and status monitor
8047 control.
8048
8049 The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
8050 modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
8051 The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
8052 data flows to and from the Ethernet Controller through the Switch Fabric.
8053
8054 Each Ethernet port uses its transmit and receive DMA channels to manage
8055 data flows through buffer descriptors that are predefined by the
8056 system (the descriptors can exist anywhere in the system memory map).
8057 These descriptors are data structures that point to buffers filled
8058 with data ready to transmit over Ethernet, or they point to empty
8059 buffers ready to receive data from Ethernet.
8060
8061 Signed-off-by: Alexandre Bounine <[email protected]>
8062 Signed-off-by: Roy Zang <[email protected]>
8063
8064commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
8065Author: roy zang <[email protected]>
8066Date: Thu Nov 2 19:01:33 2006 +0800
8067
8068 Tundra tsi108 header file.
8069
8070 The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
8071 PowerPC processors that offers numerous system interconnect options for
8072 embedded application designers. The Tsi108 can interconnect 60x or
8073 MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
8074 and Flash. Provided the macro define for tsi108 chip.
8075
8076 Signed-off-by: Alexandre Bounine <[email protected]>
8077 Signed-off-by: Roy Zang <[email protected]>
8078
8079commit 87c4db09699c6b89176b31004afcb83eb1585d47
8080Author: roy zang <[email protected]>
8081Date: Thu Nov 2 18:59:15 2006 +0800
8082
8083 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
8084 mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
8085
8086 Signed-off-by: Alexandre Bounine <[email protected]>
8087 Signed-off-by: Roy Zang <[email protected]>
8088
8089commit 27801b8ab11c61b577e45742a515bb3b23b80241
8090Author: roy zang <[email protected]>
8091Date: Thu Nov 2 18:57:21 2006 +0800
8092
8093 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
8094 Make ,config.mk and link file for the mpc7448hpc2 board.
8095
8096 Signed-off-by: Alexandre Bounine <[email protected]>
8097 Signed-off-by: Roy Zang <[email protected]>
8098
8099commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
8100Author: roy zang <[email protected]>
8101Date: Thu Nov 2 18:55:04 2006 +0800
8102
8103 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
8104 The mpc7448hpc2 board support header file.
8105
8106 Signed-off-by: Alexandre Bounine <[email protected]>
8107 Signed-off-by: Roy Zang <[email protected]>
8108
8109commit 625bb5ddb50b243f931262ca8c46956409471917
8110Author: roy zang <[email protected]>
8111Date: Thu Nov 2 18:52:21 2006 +0800
8112
8113 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
8114 The mpc7448hpc2 board support low level assemble language init code.
8115
8116 Signed-off-by: Alexandre Bounine <[email protected]>
8117 Signed-off-by: Roy Zang <[email protected]>
8118
8119commit 4c52783b3d024e153c4972b97332e314bc3bdc46
8120Author: roy zang <[email protected]>
8121Date: Thu Nov 2 18:49:51 2006 +0800
8122
8123 General code modification for mpc7448hpc2 board support.
8124 1. Add 7447A and 7448 processor support.
8125 2. Add the following flags.
8126
8127 CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
8128 (such as by switch on board), this flag should be set.
8129
8130 CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
8131 relocates to RAM, this flag should be set.
8132
8133 CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
8134 system hang in exception, this flag should be set.
8135
8136 There is a design issue for tsi108/109 pci configure read. When pci scan
8137 the slots, if there is no pci card, the tsi108/9 will cause a machine
8138 check exception for mpc7448 processor.
8139
8140 Signed-off-by: Alexandre Bounine <[email protected]>
8141 Signed-off-by: Roy Zang <[email protected]>
8142
8143commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
8144Author: roy zang <[email protected]>
8145Date: Thu Nov 2 18:34:47 2006 +0800
8146
8147 Add README file for mpc7448hpc2 board.
8148 Signed-off-by: Roy Zang <[email protected]>
8149
b21b511d
WD		 8150commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
8151Author: Bartlomiej Sieka <[email protected]>
8152Date: Wed Nov 1 02:04:38 2006 +0100
8153
8154 Finish up support for MarelV38B board
8155 - add watchdog support
8156 - enable GPIO_WKUP_7 pin for input
8157 - code cleanup
8158
8159commit ffa150bc90c943ca265170bd1be3f293674dd5c7
8160Author: Bartlomiej Sieka <[email protected]>
8161Date: Wed Nov 1 01:45:46 2006 +0100
8162
8163 - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
8164 * remove warnings when compiling ethaddr.c
8165 * adjust linker script (fixes a crash resulting from incorrect
8166 definition of __u_boot_cmd_start)
8167 - Some MarelV38B code cleanup.
8168
8169commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
8170Author: Bartlomiej Sieka <[email protected]>
8171Date: Wed Nov 1 01:38:16 2006 +0100
8172
8173 - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
8174 MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
8175 Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
8176 MPC5XXX_WU_GPIO_DATA_O for affected boards.
8177
8178 - Add defintions for some MPC5XXX GPIO pins.
8179
8180commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
8181Author: Bartlomiej Sieka <[email protected]>
8182Date: Wed Nov 1 01:34:29 2006 +0100
8183
8184 Changed MarelV38B board make target to lowercase. Config file cleanup.
8185
c5920044
WD		 8186commit 1954be6e9c9421b45d0a9d05b10356acc7563150
8187Author: Wolfgang Denk <[email protected]>
8188Date: Sun Oct 29 01:03:51 2006 +0200
8189
8190 Automatically adjust ARFLAGS so "make -s" is really silent.
8191
8192commit fae684e89844856383bdf101440889557df3e6b1
8193Author: Stefan Roese <[email protected]>
8194Date: Sat Oct 28 16:45:00 2006 +0200
8195
8196 [PATCH] omap925.c: Remove unused functions
8197
8198 Signed-off-by: Ladislav Michl <[email protected]>
8199 Signed-off-by: Stefan Roese <[email protected]>
8200
8201commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
8202Author: Stefan Roese <[email protected]>
8203Date: Sat Oct 28 17:12:58 2006 +0200
8204
8205 [PATCH] Add some missing machtypes for netstar & voiceblue boards
8206
8207 Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
8208 numbers in code.
8209
8210 Signed-off-by: Ladislav Michl <[email protected]>
8211 Signed-off-by: Stefan Roese <[email protected]>
8212
8213commit 856f054410cef52d868feb330168b2a4c4091328
8214Author: Stefan Roese <[email protected]>
8215Date: Sat Oct 28 15:55:52 2006 +0200
8216
8217 [PATCH] NAND: Partition name support added to NAND subsystem
8218
8219 chpart, nboot and NAND subsystem related commands now accept also partition
8220 name to specify offset.
8221
8222 Signed-off-by: Ladislav Michl <[email protected]>
8223 Signed-off-by: Stefan Roese <[email protected]>
8224
8225commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
8226Author: Wolfgang Denk <[email protected]>
8227Date: Sat Oct 28 02:29:44 2006 +0200
8228
8229 Update CHANGELOG.
8230
07a69a18
WD		 8231commit 2751a95abd1b96911081c357e96a12fa97b40dee
8232Author: Wolfgang Denk <[email protected]>
8233Date: Sat Oct 28 02:29:14 2006 +0200
8234
8235 Enable commandline editing and hush shell on all TQM boards.
8236
8237commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
8238Author: Wolfgang Denk <[email protected]>
8239Date: Sat Oct 28 02:28:02 2006 +0200
8240
8241 README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
8242
8243commit 471a7be7a042e95e440f5de969c9765214ae8d6e
8244Author: Wolfgang Denk <[email protected]>
8245Date: Sat Oct 28 01:14:32 2006 +0200
8246
8247 Check for illegal character '=' in environment variable names.
8248
8249 Make sure the string passed as variable name does not contain a '='
8250 character. This not only prevents the common error or typing
8251 "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
8252 also closes a backdoor which allowed to delete write-protected
8253 environment variables, for example by using "setenv ethaddr=".
8254
8255commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
8256Author: Wolfgang Denk <[email protected]>
8257Date: Sat Oct 28 00:38:39 2006 +0200
8258
8259 Minor code cleanup.
8260
8261commit e11887a77d81077416a2d1c5e0354916fee8c034
8262Author: Haavard Skinnemoen <[email protected]>
8263Date: Thu Oct 26 17:55:31 2006 +0200
8264
8265 Don't pass any debug options directly to the assembler
8266
8267 When passing the -g option to gcc, gcc automatically selects a
8268 suitable --g<format> option to pass on to the assembler.
8269 Thus, there's no point in forcing a specific debug option on the
8270 assembler using the -Wa mechanism.
8271
8272 Signed-off-by: Haavard Skinnemoen <[email protected]>
8273
8274commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
8275Author: Jon Loeliger <[email protected]>
8276Date: Fri Oct 27 07:47:22 2006 -0500
8277
8278 MPC86xx: Cleaned up unused and conditionally used local variables.
8279
8280 Signed-off-by: Jon Loeliger <[email protected]>
8281
8282commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
8283Author: Wolfgang Denk <[email protected]>
8284Date: Fri Oct 27 11:55:21 2006 +0200
8285
8286 Fix "ar" flags in some Makefiles to allow for silent "make -s"
8287
8288commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
8289Author: Ben Warren <[email protected]>
8290Date: Thu Oct 26 14:38:25 2006 -0400
8291
8292 Fix TSEC driver (now for real): avoid crashes if PHY is not attached
8293 to a TSEC (e.g. a switch is connected via RMII) or
8294 if the PHY is defective/incorrectly configured.
8295
8296 Signed-off-by: Ben Warren <[email protected]>
8297
8298commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
8299Author: Ben Warren <[email protected]>
8300Date: Thu Oct 26 14:38:25 2006 -0400
8301
8302 Fix TSEC driver: avoid crashes if PHY is not attached
8303 to a TSEC (e.g. a switch is connected via RMII) or
8304 if the PHY is defective/incorrectly configured.
8305
8306 Signed-off-by: Ben Warren <[email protected]>
8307
b985b5d6
BW		 8308commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
8309Author: Wolfgang Denk <[email protected]>
8310Date: Thu Oct 26 16:24:31 2006 +0200
8311
8312 Code cleanup.
8313
2b2a40be
WD		 8314commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
8315Author: Haavard Skinnemoen <[email protected]>
8316Date: Wed Oct 25 15:48:59 2006 +0200
8317
8318 Finish up support for the ATSTK1000/ATSTK1002 boards
b985b5d6 8319
2b2a40be
WD		 8320 Add atstk1002_config target to Makefile and move the AVR32 section
8321 down below Blackfin so that it doesn't end up in the middle of
8322 MIPS.
b985b5d6 8323
2b2a40be
WD		 8324 Drop the autogenerated linker script thing for now. Will have to
8325 revisit how to handle chips with different flash and RAM layout
8326 later.
b985b5d6 8327
2b2a40be
WD		 8328 Signed-off-by: Haavard Skinnemoen <[email protected]>
8329
8330commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
8331Author: Kumar Gala <[email protected]>
8332Date: Tue Oct 24 23:47:37 2006 -0500
8333
8334 Added support for Multi-Image files that contain a device tree
b985b5d6 8335
2b2a40be
WD		 8336 If a Multi-Image file contains a third image we try to use it as a
8337 device tree. The device tree image is assumed to be uncompressed in the
f4eb5452 8338 image file. We automatically allocate space for the device tree in memory
2b2a40be 8339 and provide an 8k pad to allow more than a reasonable amount of growth.
b985b5d6 8340
2b2a40be
WD		 8341 Additionally, a device tree that was contained in flash will now automatically
8342 get copied to system memory as part of boot. Previously an error was
8343 reported if one tried to boot a device tree that was in flash.
b985b5d6 8344
2b2a40be
WD		 8345 Signed-off-by: Kumar Gala <[email protected]>
8346
4e53a258
WD		 8347commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
8348Author: Wolfgang Denk <[email protected]>
2b2a40be 8349Date: Tue Oct 24 21:35:55 2006 +0200
4e53a258
WD		 8350
8351 Switch to automatically generated CHANGELOG file.
8352 (use "make CHANGELOG" to update it from time to time)
8353
7c52c4b9
WD		 8354commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
8355Author: Stefan Roese <[email protected]>
2b2a40be 8356Date: Tue Oct 24 18:06:48 2006 +0200
7c52c4b9
WD		 8357
8358 Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
8359 Patch by Stefan Roese, 24 Oct 2006
8360
8361commit 8ae3b713b2286e0c3213b7802062e4c1599010de
8362Author: Wolfgang Denk <[email protected]>
2b2a40be 8363Date: Tue Oct 24 17:24:55 2006 +0200
7c52c4b9
WD		 8364
8365 Merge with /home/wd/git/u-boot/master
8366
8367commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
8368Author: Wolfgang Denk <[email protected]>
2b2a40be 8369Date: Tue Oct 24 15:32:57 2006 +0200
7c52c4b9
WD		 8370
8371 Code cleanup
8372
8373commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
8374Author: Wolfgang Denk <[email protected]>
2b2a40be 8375Date: Tue Oct 24 14:51:36 2006 +0200
7c52c4b9
WD		 8376
8377 Move atstk1000 files into vendor specific directory.
8378 Patch by Haavard Skinnemoen, 12 Sep 2006
8379
8380commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
8381Author: Wolfgang Denk <[email protected]>
2b2a40be 8382Date: Tue Oct 24 14:42:37 2006 +0200
7c52c4b9
WD		 8383
8384 Add ATSTK1000 and ATSTK1002 board support
8385 Patch by Haavard Skinnemoen, 06 Sep 2006
b985b5d6 8386
7c52c4b9
WD		 8387 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
8388 daughterboard.
b985b5d6 8389
7c52c4b9
WD		 8390 ATSTK1000 is a full-featured development board for AT32AP CPUs. It
8391 has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
8392 and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
8393 CompactFlash cards. For more information, please see this page:
b985b5d6 8394
7c52c4b9 8395 http://www.atmel.com/dyn/products/tools.asp?family_id=682
b985b5d6 8396
7c52c4b9
WD		 8397 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
8398 AT32AP7000 chip.
b985b5d6 8399
7c52c4b9
WD		 8400 Signed-off-by: Haavard Skinnemoen <[email protected]>
8401
8402commit f93ae788c3640fcde5db383471d45548ff4060d0
8403Author: Wolfgang Denk <[email protected]>
2b2a40be 8404Date: Tue Oct 24 14:31:24 2006 +0200
7c52c4b9
WD		 8405
8406 Add common serial driver for Atmel AT32 and AT91 chips
8407 Patch by Haavard Skinnemoen, 06 Sep 2006
b985b5d6 8408
7c52c4b9
WD		 8409 This is a first attempt at creating a common serial driver for Atmel
8410 chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
8411 be possible to support AT91RM9200 and other ARM-based chips with some
8412 minor modifications.
b985b5d6 8413
7c52c4b9
WD		 8414 There's nothing fundamentally AVR32-specific in this driver, but it
8415 does use some features which are currently only defined for the
8416 AT32AP CPU port:
8417 * pm_get_clock_freq: Obtain the clock frequency of a given domain
8418 * gd->console_uart: A "struct device" containing information about
2b2a40be
WD		 8419 register mappings, gpio resources and clocks associated with the
8420 UART device.
b985b5d6 8421
7c52c4b9
WD		 8422 For more information about these features, please see the "AT32AP
8423 CPU" patch.
8424
8425commit 72a087e04705c26cad982879ebd06b5281bf825a
8426Author: Wolfgang Denk <[email protected]>
2b2a40be 8427Date: Tue Oct 24 14:27:35 2006 +0200
7c52c4b9
WD		 8428
8429 Add AT32AP CPU and AT32AP7000 SoC support
8430 Patch by Haavard Skinnemoen, 06 Sep 2006
b985b5d6 8431
7c52c4b9
WD		 8432 This patch adds support for the AT32AP CPU family and the AT32AP7000
8433 chip, which is the first chip implementing the AVR32 architecture.
b985b5d6 8434
7c52c4b9
WD		 8435 The AT32AP CPU core is a high-performance implementation featuring a
8436 7-stage pipeline, separate instruction- and data caches, and a MMU.
8437 For more information, please see the "AVR32 AP Technical Reference":
b985b5d6 8438
7c52c4b9 8439 http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
b985b5d6 8440
7c52c4b9
WD		 8441 In addition to this, the AT32AP7000 chip comes with a large set of
8442 integrated peripherals, many of which are shared with the AT91 series
8443 of ARM-based microcontrollers from Atmel. Full data sheet is
8444 available here:
b985b5d6 8445
7c52c4b9 8446 http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
b985b5d6 8447
7c52c4b9
WD		 8448 Signed-off-by: Haavard Skinnemoen <[email protected]>
8449
8450commit 7b64fef33c66be648826c0ff9758298ef13d0604
8451Author: Wolfgang Denk <[email protected]>
2b2a40be 8452Date: Tue Oct 24 14:21:16 2006 +0200
7c52c4b9
WD		 8453
8454 Add AVR32 architecture support
8455 Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
b985b5d6 8456
7c52c4b9
WD		 8457 This patch adds common infrastructure code for the Atmel AVR32
8458 architecture. See doc/README.AVR32 for details.
b985b5d6 8459
7c52c4b9
WD		 8460 Signed-off-by: Haavard Skinnemoen <[email protected]>
8461
8462commit 2da2d9a4766063b9848f3a35ad6025499cf87265
8463Author: Wolfgang Denk <[email protected]>
2b2a40be 8464Date: Tue Oct 24 13:57:33 2006 +0200
7c52c4b9
WD		 8465
8466 Use -g instead of -gstabs in AFLAGS_DEBUG
8467 Patch by Haavard Skinnemoen, 30 Aug 2006
b985b5d6 8468
7c52c4b9
WD		 8469 In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
8470 matter what the target's preferred debugging format is. This patch
8471 simply replaces -gstabs with -g, so that the default debugging format
8472 for the architecture is used.
8473
8474commit 965829872169c2996023840d98e1d85ad148d629
8475Author: Wolfgang Denk <[email protected]>
2b2a40be 8476Date: Tue Oct 24 13:55:18 2006 +0200
7c52c4b9
WD		 8477
8478 Fix/workaround broken dependency handling with make 3.81
8479 Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
8480
8481commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
8482Author: Marian Balakowicz <[email protected]>
2b2a40be 8483Date: Mon Oct 23 22:17:05 2006 +0200
7c52c4b9
WD		 8484
8485 Fix sequoia separate object direcory building problems.
8486
8487commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
8488Author: Jon Loeliger <[email protected]>
2b2a40be 8489Date: Fri Oct 20 17:16:35 2006 -0500
7c52c4b9
WD		 8490
8491 Use generic I2C register block on 85xx and 86xx.
b985b5d6 8492
7c52c4b9
WD		 8493 Replace private IMMAP I2C structures with generic reg block
8494 and allow 86xx to have multiple I2C device busses.
b985b5d6 8495
7c52c4b9
WD		 8496 Signed-off-by: Jon Loeliger <[email protected]>
8497
8498commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
8499Author: Jon Loeliger <[email protected]>
2b2a40be 8500Date: Fri Oct 20 15:54:34 2006 -0500
7c52c4b9
WD		 8501
8502 Fix compilation warnings on a few 85xx boards.
b985b5d6 8503
7c52c4b9
WD		 8504 Signed-off-by: Jon Loeliger <[email protected]>
8505
8506commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
8507Author: Jon Loeliger <[email protected]>
2b2a40be 8508Date: Fri Oct 20 15:50:15 2006 -0500
7c52c4b9
WD		 8509
8510 Converted all 85xx boards to use a common FSL I2C driver.
8511 Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
8512 And removed hard i2c path from a few u-boot.lds scipts too.
8513 Minor whitespace cleanups along the way.
b985b5d6 8514
7c52c4b9
WD		 8515 Signed-off-by: Jon Loeliger <[email protected]>
8516
8517commit 4d45f69e362b05892c9e92a7907e5820995612aa
8518Author: Jon Loeliger <[email protected]>
2b2a40be 8519Date: Thu Oct 19 12:02:24 2006 -0500
7c52c4b9
WD		 8520
8521 Rewrite a series of goto statements as a sequences of
8522 conditional expressions instead.
b985b5d6 8523
7c52c4b9 8524 Use consistent return code 0/-1 for good/bad indicators.
b985b5d6 8525
7c52c4b9 8526 Include one fewer file if the driver isn't used at all.
b985b5d6 8527
7c52c4b9
WD		 8528 Signed-off-by: Jon Loeliger <[email protected]>
8529
8530commit 7237c033b02fe295880435f1eb80819a0c987532
8531Author: Jon Loeliger <[email protected]>
2b2a40be 8532Date: Thu Oct 19 11:02:16 2006 -0500
7c52c4b9
WD		 8533
8534 Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
b985b5d6 8535
7c52c4b9
WD		 8536 in an effort to begin to unify the umpteen FSL I2C drivers that
8537 are all otherwise very similar.
b985b5d6 8538
7c52c4b9
WD		 8539 Signed-off-by: Jon Loeliger <[email protected]>
8540
8541commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
8542Author: Jon Loeliger <[email protected]>
2b2a40be 8543Date: Thu Oct 19 11:33:52 2006 -0500
7c52c4b9
WD		 8544
8545 * Fix a bunch of compiler warnings for gcc 4.0
b985b5d6 8546
7c52c4b9
WD		 8547 Signed-off-by: Matthew McClintock <[email protected]>
8548
2b2a40be
WD		 8549commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
8550Author: Stefan Roese <[email protected]>
8551Date: Tue Oct 17 06:14:31 2006 +0200
8552
8553 Add monitor functions for indirect access to PPC440 DCR's
8554 Patch by Leonid Baryudin, 12 Oct 2006
8555
7c52c4b9
WD		 8556commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
8557Author: Jon Loeliger <[email protected]>
2b2a40be 8558Date: Fri Oct 13 16:47:53 2006 -0500
7c52c4b9
WD		 8559
8560 Fixed leading whitespace issues.
8561 Removed spurious LAWAR thing.
b985b5d6 8562
7c52c4b9
WD		 8563 Signed-off-by: Jon Loeliger <[email protected]>
8564
8565commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
8566Author: Jon Loeliger <[email protected]>
2b2a40be 8567Date: Thu Oct 12 10:42:36 2006 -0500
7c52c4b9
WD		 8568
8569 Remove unneeded include files and local variable.
b985b5d6 8570
7c52c4b9
WD		 8571 Signed-off-by: Jon Loeliger <[email protected]>
8572
8573commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
8574Author: Grant Likely <[email protected]>
2b2a40be 8575Date: Tue Oct 10 00:23:32 2006 -0600
7c52c4b9
WD		 8576
8577 Fix possible uninitialized variable compiler warning.
b985b5d6 8578
7c52c4b9
WD		 8579 When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
8580 do_bootm_linux() may be uninitialized. There is no possibility in the
8581 current code that len will get used uninitialized, but this fix follows
8582 the existing convention of setting both len and data to zero at the same
8583 time.
b985b5d6 8584
7c52c4b9
WD		 8585 Signed-off-by: Grant Likely <[email protected]>
8586
8587commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
8588Author: Matthew McClintock <[email protected]>
2b2a40be 8589Date: Wed Oct 11 15:13:01 2006 -0500
7c52c4b9
WD		 8590
8591 * Fix a bunch of compiler warnings for gcc 4.0
b985b5d6 8592
7c52c4b9
WD		 8593 Signed-off-by: Matthew McClintock <[email protected]>
8594
8595commit bf651baa365e5447246aad6a633ccd667cf24a39
8596Author: Jon Loeliger <[email protected]>
2b2a40be 8597Date: Wed Oct 11 10:10:43 2006 -0500
7c52c4b9
WD		 8598
8599 Move "ar" flags to config.mk to allow for silent "make -s"
8600
8601commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
8602Author: Jon Loeliger <[email protected]>
2b2a40be 8603Date: Tue Oct 10 17:19:03 2006 -0500
7c52c4b9
WD		 8604
8605 Coding style changes to remove local varible blocks
8606 and reformat a bit nicer.
8607
8608commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
8609Author: Jon Loeliger <[email protected]>
2b2a40be 8610Date: Tue Oct 10 17:16:04 2006 -0500
7c52c4b9
WD		 8611
8612 Fix whitespace issues.
8613
8614commit 7b382b7125f2397cce63253df62f183e3dfa2770
8615Author: Jon Loeliger <[email protected]>
2b2a40be 8616Date: Tue Oct 10 17:14:45 2006 -0500
7c52c4b9
WD		 8617
8618 Fix whitespace issues.
8619
8620commit e10390ddd736b0dad1528eec4b0fe35c0827139a
8621Author: Jon Loeliger <[email protected]>
2b2a40be 8622Date: Tue Oct 10 17:06:53 2006 -0500
27e166b8 8623
7c52c4b9
WD		 8624 Fix whitespace issues.
8625
8626commit 89875e96ba3f023157bf50d5f8e33bf254964a76
8627Author: Jon Loeliger <[email protected]>
2b2a40be 8628Date: Tue Oct 10 17:03:43 2006 -0500
7c52c4b9
WD		 8629
8630 Ran lindent and cleaned up whitespace issues.
8631 Format for 80-columns too.
8318fbf8 8632
7c52c4b9
WD		 8633commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
8634Author: Jon Loeliger <[email protected]>
2b2a40be 8635Date: Tue Oct 10 17:02:22 2006 -0500
7ade0c63 8636
7c52c4b9 8637 Fix whitespace and 80-col issues.
ba999c53 8638
8d9a8610
WD		 8639commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
8640Author: Stefan Roese <[email protected]>
8641Date: Sat Oct 7 11:36:51 2006 +0200
8642
8643 CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
8644 Patch by Stefan Roese, 07 Oct 2006
8645
8646commit 5bc528fa4da751d472397b308137238a6465afd2
8647Author: Stefan Roese <[email protected]>
8648Date: Sat Oct 7 11:35:25 2006 +0200
8649
8650 Update ALPR code (NAND support working now)
8651 Patch by Stefan Roese, 07 Oct 2006
8652
8653commit 77d5034847d328753b80c46b83f960a14a26f40e
8654Author: Stefan Roese <[email protected]>
8655Date: Sat Oct 7 11:33:03 2006 +0200
8656
8657 Remove compile warnings in fpga code
8658 Patch by Stefan Roese, 07 Oct 2006
8659
8660commit f3443867e90d2979a7dd1c65b0d537777e1f9850
8661Author: Stefan Roese <[email protected]>
8662Date: Sat Oct 7 11:30:52 2006 +0200
8663
8664 Add CONFIG_BOARD_RESET to configure board specific reset function
8665 Patch by Stefan Roese, 07 Oct 2006
8666
7c52c4b9
WD		 8667commit f55df18187e7a45cb73fec4370d12135e6691ae1
8668Author: John Traill <[email protected]>
2b2a40be 8669Date: Fri Sep 29 08:23:12 2006 +0100
f836e414 8670
7c52c4b9 8671 Fix missing tCycle/modfreq calculation.
b985b5d6 8672
7c52c4b9 8673 Signed-off-by: John Traill <[email protected]>
f6414714 8674
7c52c4b9
WD		 8675commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
8676Author: Andy Fleming <[email protected]>
2b2a40be 8677Date: Wed Sep 13 10:33:35 2006 -0500
6a0766ed 8678
7c52c4b9 8679 Updated config headers to add default FDT-based booting
edf0b543 8680
7c52c4b9
WD		 8681commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
8682Author: Andy Fleming <[email protected]>
2b2a40be 8683Date: Wed Sep 13 10:34:18 2006 -0500
3231ea64 8684
7c52c4b9 8685 Add support for eTSEC 3 & 4 on 8548 CDS
b985b5d6 8686
7c52c4b9
WD		 8687 * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
8688 This will only work on rev 1.3 boards (but doesn't break older boards)
8689 * Cleaned up some comments to reflect the expanded role of tsec
8690 in other systems
d7762337 8691
7c52c4b9
WD		 8692commit 084d648b109c8984f83674043c1a7fa3885ef801
8693Author: Andy Fleming <[email protected]>
2b2a40be 8694Date: Wed Sep 13 10:33:56 2006 -0500
e0a46554 8695
7c52c4b9 8696 Added code to support 2.6.18 PCI changes in u-boot
b985b5d6 8697
7c52c4b9 8698 * Added code to swizzle the IRQ map for the PCI
87621bc2 8699
7c52c4b9
WD		 8700commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
8701Author: Jon Loeliger <[email protected]>
2b2a40be 8702Date: Tue Sep 19 09:34:10 2006 -0500
5c34eee9 8703
7c52c4b9 8704 Modified makefile for new build mechanism.
b985b5d6 8705
7c52c4b9 8706 Signed-off-by: Jon Loeliger <[email protected]>
752d6837 8707
7c52c4b9
WD		 8708commit d14ba6a798beb753e7a864500414fcc2d198b8bc
8709Author: Jon Loeliger <[email protected]>
2b2a40be 8710Date: Thu Sep 14 08:40:36 2006 -0500
2255b2d2 8711
7c52c4b9
WD		 8712 Handle 86xx SVR values according to the new Reference Manual.
8713 Both 8641 and 8641D have SVR == 0x8090, and are distinguished
8714 by the byte in bits 16-23 instead.
8715 Thanks to Jason Jin for noticing.
b985b5d6 8716
7c52c4b9 8717 Signed-off-by: Jon Loeliger <[email protected]>
1a1b7374 8718
7c52c4b9
WD		 8719commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
8720Author: Zhang Wei <[email protected]>
2b2a40be 8721Date: Mon Aug 28 14:25:31 2006 +0800
d262a92f 8722
7c52c4b9
WD		 8723 Fixed an OF-tree off-by-one bug when adding a new property name.
8724 This bug will cause the kernel booting to pause a long time.
b985b5d6 8725
7c52c4b9
WD		 8726 Signed-off-by: Zhang Wei <[email protected]>
8727 (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
d82718fe 8728
7c52c4b9
WD		 8729commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
8730Author: Jon Loeliger <[email protected]>
2b2a40be 8731Date: Tue Aug 29 11:05:09 2006 -0500
1d92b2e5 8732
7c52c4b9 8733 Remove trailing empty lines.
2b208f53 8734
7c52c4b9
WD		 8735commit cd6d73d5b895a5935ac4fde0a356288142a584e0
8736Author: Jon Loeliger <[email protected]>
2b2a40be 8737Date: Tue Aug 29 09:48:49 2006 -0500
511d0c72 8738
7c52c4b9 8739 Remove bogus msync and use volatile asm.
8d4ac794 8740
7c52c4b9
WD		 8741commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
8742Author: Jon Loeliger <[email protected]>
2b2a40be 8743Date: Tue Aug 29 08:17:14 2006 -0500
ac611700 8744
7c52c4b9 8745 Add myself as maintainer for MPC8641HPCN.
7299712c 8746
7c52c4b9
WD		 8747commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
8748Author: Zhang Wei <[email protected]>
2b2a40be 8749Date: Mon Aug 28 14:25:31 2006 +0800
56fb6ba1 8750
7c52c4b9
WD		 8751 Fixed an OF-tree off-by-one bug when adding a new property name.
8752 This bug will cause the kernel booting to pause a long time.
b985b5d6 8753
7c52c4b9 8754 Signed-off-by: Zhang Wei <[email protected]>
d373325e 8755
7c52c4b9
WD		 8756commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
8757Author: Haiying Wang <[email protected]>
2b2a40be 8758Date: Fri Aug 25 14:38:34 2006 -0400
aeec782b 8759
7c52c4b9
WD		 8760 Change ramdiskaddr and dtbaddr
8761 Remove PEX fluff commands.
b985b5d6 8762
7c52c4b9
WD		 8763 Signed-off-by: Haiying Wang <[email protected]>
8764 Signed-off-by: Jon Loeliger <[email protected]>
d214fbbd 8765
7c52c4b9
WD		 8766commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
8767Author: Matthew McClintock <[email protected]>
2b2a40be 8768Date: Wed Aug 23 13:32:45 2006 -0500
854bc8da 8769
7c52c4b9 8770 * Another small fix for booting with disable_of
b985b5d6 8771
7c52c4b9 8772 Signed-off-by: Matthew McClintock <[email protected]>
d12ae808 8773
7c52c4b9
WD		 8774commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
8775Author: Jon Loeliger <[email protected]>
2b2a40be 8776Date: Wed Aug 23 11:04:43 2006 -0500
a73c8dbb 8777
7c52c4b9 8778 Cleanup and lindent new AHCI driver.
a87d46f7 8779
7c52c4b9
WD		 8780commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
8781Author: Jin Zhengxiong <[email protected]>
2b2a40be 8782Date: Wed Aug 23 19:15:12 2006 +0800
baf31249 8783
7c52c4b9 8784 Add AHCI define and sata support for MPC8641HPCN board.
b985b5d6 8785
7c52c4b9 8786 Signed-off-by:Jason Jin<[email protected]>
5e09054a 8787
7c52c4b9
WD		 8788commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
8789Author: Jin Zhengxiong <[email protected]>
2b2a40be 8790Date: Wed Aug 23 19:10:44 2006 +0800
4f0645eb 8791
7c52c4b9 8792 Add AHCI support to u-boot
b985b5d6 8793
7c52c4b9
WD		 8794 Add AHCI support in u-boot, enable the sata disk controllers which
8795 following the AHCI protocol.
b985b5d6 8796
7c52c4b9 8797 Signed-off-by:Jason Jin<[email protected]>
2d658967 8798
7c52c4b9
WD		 8799commit d8ea2acf5f137cae99417df4f573d036ee384668
8800Author: Zhang Wei <[email protected]>
2b2a40be 8801Date: Wed Aug 23 17:54:32 2006 +0800
efa20585 8802
7c52c4b9 8803 Add dtb boot-up parameter to default boot commands.
b985b5d6 8804
7c52c4b9 8805 Signed-off-by: Zhang Wei <[email protected]>
8cacfb85 8806
7c52c4b9
WD		 8807commit b93775c2036b99baa390ea425c4771895bbc63c4
8808Author: Jon Loeliger <[email protected]>
2b2a40be 8809Date: Tue Aug 22 18:26:08 2006 -0500
887e2ec9 8810
7c52c4b9 8811 Cleanup even more poorly introduced whitespace.
0dab03ba 8812
7c52c4b9
WD		 8813commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
8814Author: Jon Loeliger <[email protected]>
2b2a40be 8815Date: Tue Aug 22 18:07:00 2006 -0500
f60ba0d3 8816
7c52c4b9 8817 Cleanup more poorly introduced whitespace.
f9328639 8818
7c52c4b9
WD		 8819commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
8820Author: Jon Loeliger <[email protected]>
2b2a40be 8821Date: Tue Aug 22 17:54:05 2006 -0500
f9328639 8822
7c52c4b9 8823 Cleanup poorly introduced whitespace.
24d3d375 8824
7c52c4b9
WD		 8825commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
8826Author: Jon Loeliger <[email protected]>
2b2a40be 8827Date: Tue Aug 22 12:25:27 2006 -0500
6608043f 8828
7c52c4b9 8829 General indent and whitespace cleanups.
4c15ef55 8830
7c52c4b9
WD		 8831commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
8832Author: Jon Loeliger <[email protected]>
2b2a40be 8833Date: Tue Aug 22 12:06:18 2006 -0500
360b4103 8834
7c52c4b9 8835 General indent and whitespace cleanups.
2c051651 8836
7c52c4b9
WD		 8837commit 41a0e8b304d3ff55fe27a230507aac79684016ac
8838Author: Jon Loeliger <[email protected]>
2b2a40be 8839Date: Tue Aug 22 10:42:21 2006 -0500
2c051651 8840
7c52c4b9 8841 Cleanup compiler warnings.
2c051651 8842
7c52c4b9
WD		 8843commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
8844Author: Matthew McClintock <[email protected]>
2b2a40be 8845Date: Tue Aug 22 09:31:59 2006 -0500
2c051651 8846
7c52c4b9 8847 Fix disable_of booting
b985b5d6 8848
7c52c4b9 8849 Signed-off-by: Matthew McClintock <[email protected]>
7d0432c9 8850
7c52c4b9
WD		 8851commit 87a449c8ac396420cb24260f717ea9e6faa82047
8852Author: Matthew McClintock <[email protected]>
2b2a40be 8853Date: Tue Aug 22 09:23:55 2006 -0500
e8143e72 8854
7c52c4b9 8855 Support for FDT in uImage format, error when using FDT from flash
b985b5d6 8856
7c52c4b9 8857 Signed-off-by: Matthew McClintock <[email protected]>
0fd30252 8858
7c52c4b9
WD		 8859commit 75c299c38369d01addd5e054b8a16217b70f4a86
8860Author: Haiying Wang <[email protected]>
2b2a40be 8861Date: Tue Aug 15 15:12:55 2006 -0400
2b393b0f 8862
7c52c4b9 8863 Unlock cache before kernel starts up for MPC86xx
f5577aae 8864
7c52c4b9
WD		 8865commit 67256678f00c09b0a7f19e862e5c1847553d31bc
8866Author: Haiying Wang <[email protected]>
2b2a40be 8867Date: Tue Aug 15 15:13:15 2006 -0400
21a9cc02 8868
7c52c4b9 8869 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
16850919 8870
7c52c4b9
WD		 8871commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
8872Author: Haiying Wang <[email protected]>
2b2a40be 8873Date: Tue Aug 15 15:12:55 2006 -0400
113f64e0 8874
7c52c4b9 8875 Unlock cache before kernel starts up for MPC86xx
ddde6b7c 8876
7c52c4b9
WD		 8877commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
8878Author: Haiying Wang <[email protected]>
2b2a40be 8879Date: Tue Aug 15 15:13:15 2006 -0400
ed1cf845 8880
7c52c4b9 8881 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
6d3bc9b8 8882
7c52c4b9
WD		 8883commit 86c8e17f25e972a7e272950a0735fad84e082b88
8884Author: Matthew McClintock <[email protected]>
2b2a40be 8885Date: Wed Aug 16 13:59:47 2006 -0500
6fe16a87 8886
7c52c4b9 8887 * Fix disable_of booting
b985b5d6 8888
7c52c4b9 8889 Signed-off-by: Matthew McClintock <[email protected]>
94568b60 8890
7c52c4b9
WD		 8891commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
8892Author: Matthew McClintock <[email protected]>
2b2a40be 8893Date: Wed Aug 16 10:54:09 2006 -0500
2f6fa46d 8894
7c52c4b9 8895 * Support for FDT in uImage format, error when using FDT from flash
b985b5d6 8896
7c52c4b9 8897 Signed-off-by: Matthew McClintock <[email protected]>
ddd5d9da 8898
8d9a8610
WD		 8899commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
8900Author: Stefan Roese <[email protected]>
8901Date: Tue Aug 15 14:22:35 2006 +0200
8902
8903 Add initial support for the ALPR board from Prodrive
8904 NAND needs some additional testing
8905 Patch by Heiko Schocher, 15 Aug 2006
8906
8907commit f0ff4692ff3372dec55074a8eb444943ab095abb
8908Author: Stefan Roese <[email protected]>
8909Date: Tue Aug 15 14:15:51 2006 +0200
8910
8911 Add FPGA Altera Cyclone 2 support
8912 Patch by Heiko Schocher, 15 Aug 2006
8913
7c52c4b9
WD		 8914commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
8915Author: Jon Loeliger <[email protected]>
2b2a40be 8916Date: Mon Aug 14 15:33:38 2006 -0500
80f0c0f5 8917
7c52c4b9 8918 Fix BAT0 to actually be cacheable, non-guarded as documented.
b985b5d6 8919
7c52c4b9 8920 Signed-off-by: Jon Loeliger <[email protected]>
d689e346 8921
7c52c4b9
WD		 8922commit 40bc83559db5745681909fd7382ae509567e116d
8923Author: Jon Loeliger <[email protected]>
2b2a40be 8924Date: Wed Aug 9 15:32:16 2006 -0500
0a0f3a46 8925
7c52c4b9
WD		 8926 Removed MPC8641HPCN DTS source file from build.
8927 It is no longer linked into U-Boot; its sources are
8928 now located in the kernel tree.
b985b5d6 8929
7c52c4b9 8930 Signed-off-by: Jon Loeliger <[email protected]>
6183bb9e 8931
7c52c4b9
WD		 8932commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
8933Author: Matthew McClintock <[email protected]>
2b2a40be 8934Date: Wed Jun 28 10:47:03 2006 -0500
463764c8 8935
7c52c4b9 8936 * Switched default PCI speed for 8540 ADS back to 33MHz
b985b5d6 8937
7c52c4b9
WD		 8938 * Added comments and a printf to warn that PCI-X won't
8939 work at 33MHz
8940 Patch by Andy Fleming 17-Mar-2006
b985b5d6 8941
7c52c4b9 8942 Signed-off-by: Andy Fleming <[email protected]>
d8f961bb 8943
7c52c4b9
WD		 8944commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
8945Author: Matthew McClintock <[email protected]>
2b2a40be 8946Date: Wed Jun 28 10:46:35 2006 -0500
4f92ed5f 8947
7c52c4b9 8948 * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
b985b5d6 8949
7c52c4b9 8950 Signed-off-by: Andy Fleming <[email protected]>
9ede3cc5 8951
7c52c4b9
WD		 8952commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
8953Author: Matthew McClintock <[email protected]>
2b2a40be 8954Date: Wed Jun 28 10:46:13 2006 -0500
e335496a 8955
7c52c4b9 8956 * Added VIA configuration table
b985b5d6 8957
7c52c4b9
WD		 8958 * Added support for PCI2 on CDS
8959 Patch by Andy Fleming 17-Mar-2006
b985b5d6 8960
7c52c4b9 8961 Signed-off-by: Andy Fleming <[email protected]>
36b904a7 8962
7c52c4b9
WD		 8963commit c88f9fe66b64247e5b6a38410ba315ca25596d16
8964Author: Matthew McClintock <[email protected]>
2b2a40be 8965Date: Wed Jun 28 10:45:41 2006 -0500
d8519dc7 8966
7c52c4b9 8967 * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
b985b5d6 8968
7c52c4b9 8969 Signed-off-by: Andy Fleming <[email protected]>
015c200b 8970
7c52c4b9
WD		 8971commit 97074ed9655309b64231bc2cee69fe85399f8055
8972Author: Matthew McClintock <[email protected]>
2b2a40be 8973Date: Wed Jun 28 10:45:17 2006 -0500
692519b1 8974
7c52c4b9 8975 * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
b985b5d6 8976
7c52c4b9 8977 Signed-off-by: Andy Fleming <[email protected]>
a3d9181e 8978
7c52c4b9
WD		 8979commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
8980Author: Matthew McClintock <[email protected]>
2b2a40be 8981Date: Wed Jun 28 10:44:49 2006 -0500
e51aae38 8982
7c52c4b9 8983 * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
b985b5d6 8984
7c52c4b9 8985 Signed-off-by: Andy Fleming <[email protected]>
6587f7e1 8986
7c52c4b9
WD		 8987commit a4e11558b810ef2cddffdf7b9d86bc1130441960
8988Author: Matthew McClintock <[email protected]>
2b2a40be 8989Date: Wed Jun 28 10:44:23 2006 -0500
a2c95a72 8990
7c52c4b9 8991 * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
b985b5d6 8992
7c52c4b9 8993 Signed-off-by: Andy Fleming <[email protected]>
193dd958 8994
7c52c4b9
WD		 8995commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
8996Author: Matthew McClintock <[email protected]>
2b2a40be 8997Date: Wed Jun 28 10:43:36 2006 -0500
7c52c4b9
WD		 8998
8999 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
b985b5d6 9000
7c52c4b9
WD		 9001 Signed-off-by: Jon Loeliger <[email protected]>
9002
9003commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
9004Author: Matthew McClintock <[email protected]>
2b2a40be 9005Date: Wed Jun 28 10:43:00 2006 -0500
7c52c4b9
WD		 9006
9007 * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
9008
9009commit 5498d90312aad9f6bdbf047986027c35b03cd163
9010Author: Matthew McClintock <[email protected]>
2b2a40be 9011Date: Wed Jun 28 10:42:24 2006 -0500
7c52c4b9
WD		 9012
9013 * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
9014
9015commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
9016Author: Matthew McClintock <[email protected]>
2b2a40be 9017Date: Wed Jun 28 10:41:37 2006 -0500
7c52c4b9
WD		 9018
9019 * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
9020
9021commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
9022Author: John Traill <[email protected]>
2b2a40be 9023Date: Wed Aug 9 14:33:50 2006 +0100
7c52c4b9
WD		 9024
9025 Add Rapidio support for the MPC8641HPCN
b985b5d6 9026
7c52c4b9
WD		 9027 Signed-off-by: John Traill <[email protected]>
9028
9029commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
9030Author: John Traill <[email protected]>
2b2a40be 9031Date: Tue Aug 8 11:32:43 2006 +0100
7c52c4b9
WD		 9032
9033 Fix caslat calculation
b985b5d6 9034
7c52c4b9
WD		 9035 Signed-off-by: John Traill <[email protected]>
9036
9037commit 709d3073e74153278e7904a70819bbef7df50e1a
9038Author: Jon Loeliger <[email protected]>
2b2a40be 9039Date: Thu Aug 3 16:17:56 2006 -0500
7c52c4b9
WD		 9040
9041 Convert to mac-address in ethernet nodes.
9042
9043commit 71748af833ca1017edf1415be376366ff2937d17
9044Author: Haiying Wang <[email protected]>
2b2a40be 9045Date: Fri Jul 28 12:41:35 2006 -0400
7c52c4b9
WD		 9046
9047 Correct the irq value of DUART2
9048
9049commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
9050Author: Haiying Wang <[email protected]>
2b2a40be 9051Date: Fri Jul 28 12:41:41 2006 -0400
7c52c4b9
WD		 9052
9053 Change the space size of PEX IO in README
9054
9055commit 239db37c94f7a92941c4465feceb867c609241c5
9056Author: Haiying Wang <[email protected]>
2b2a40be 9057Date: Fri Jul 28 12:41:18 2006 -0400
7c52c4b9
WD		 9058
9059 Move get_board_sys_clk to board directory
9060
9061commit 492900b985439fbce1a118afde1e35def870db03
9062Author: John Traill <[email protected]>
2b2a40be 9063Date: Fri Jul 28 09:03:54 2006 +0100
7c52c4b9
WD		 9064
9065 Fix 8641HPCN pollution
9066
9067commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
9068Author: John Traill <[email protected]>
2b2a40be 9069Date: Fri Jul 28 08:16:06 2006 +0100
7c52c4b9
WD		 9070
9071 Fix 8641HPCN timebase
9072
9073commit c86360b830f1eecd7a72208575dde4f57879faea
9074Author: Zhang Wei <[email protected]>
2b2a40be 9075Date: Fri Jul 28 00:01:34 2006 +0800
7c52c4b9
WD		 9076
9077 Fixed OF device tree of mpc86xxhpcn board.
b985b5d6 9078
7c52c4b9 9079 The changes works in with kernel irq mapping rework.
b985b5d6 9080
7c52c4b9
WD		 9081 Signed-off-by: Zhang Wei <[email protected]>
9082
9083commit bea3f28d285942bf3f7ab339ce85178ded544225
9084Author: Haiying Wang <[email protected]>
2b2a40be 9085Date: Wed Jul 12 10:48:05 2006 -0400
7c52c4b9
WD		 9086
9087 Add support for reading and writing mac addresses to or from ID EEPROM.
b985b5d6 9088
7c52c4b9
WD		 9089 Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
9090 With attached patch, we can use command "mac/mac read/mac save/"
9091 to read and write EEPROM under u-boot prompt.
b985b5d6 9092
7c52c4b9
WD		 9093 U-boot will calculate the checksum of EEPROM while bootup,
9094 if it is right, then u-boot will check whether the mac address
9095 of eTSEC0/1/2/3 is availalbe (non-zero).
b985b5d6 9096
7c52c4b9
WD		 9097 If there is mac address availabe in EEPROM, u-boot will use it,
9098 otherewise, u-boot will use the mac address defined in
9099 MPC8641HPCN.h. This matches the requirement to set unique mac address
9100 for each TSEC port.
b985b5d6 9101
7c52c4b9
WD		 9102 Signed-off-by: Haiying Wang <[email protected]>
9103 Signed-off-by: York Sun <[email protected]>
9104
9105commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
9106Author: Jin Zhengxiong <[email protected]>
2b2a40be 9107Date: Thu Jul 13 10:35:10 2006 -0500
7c52c4b9
WD		 9108
9109 Fixed initrd issue by define big RAM
b985b5d6 9110
7c52c4b9
WD		 9111 Signed-off-by:Jason Jin <[email protected]>
9112
9113commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
9114Author: Jason Jin <[email protected]>
2b2a40be 9115Date: Fri Jul 7 10:01:45 2006 -0500
7c52c4b9
WD		 9116
9117 We made a u-boot patch to fix the hang up issue
9118 when booting filesystem from ramdisk.
b985b5d6 9119
7c52c4b9
WD		 9120 Signed-off-by:Jason Jin <[email protected]>
9121
9122commit 38433ccc5850ee70549af0b2bc5b920355ef5388
9123Author: Matthew McClintock <[email protected]>
2b2a40be 9124Date: Wed Jun 28 10:47:03 2006 -0500
7c52c4b9
WD		 9125
9126 * Switched default PCI speed for 8540 ADS back to 33MHz
9127 * Added comments and a printf to warn that PCI-X won't
9128 work at 33MHz
9129 Patch by Andy Fleming 17-Mar-2006
b985b5d6 9130
7c52c4b9
WD		 9131 Signed-off-by: Andy Fleming <[email protected]>
9132
9133commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
9134Author: Matthew McClintock <[email protected]>
2b2a40be 9135Date: Wed Jun 28 10:46:35 2006 -0500
7c52c4b9
WD		 9136
9137 * Fixed a bug where 8555 PCI code used the old variable and
9138 function names
9139 Patch by Andy Fleming 17-Mar-2006
b985b5d6 9140
7c52c4b9
WD		 9141 Signed-off-by: Andy Fleming <[email protected]>
9142
9143commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
9144Author: Matthew McClintock <[email protected]>
2b2a40be 9145Date: Wed Jun 28 10:46:13 2006 -0500
7c52c4b9
WD		 9146
9147 * Added VIA configuration table
9148 * Added support for PCI2 on CDS
9149 Patch by Andy Fleming 17-Mar-2006
b985b5d6 9150
7c52c4b9
WD		 9151 Signed-off-by: Andy Fleming <[email protected]>
9152
9153commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
9154Author: Matthew McClintock <[email protected]>
2b2a40be 9155Date: Wed Jun 28 10:45:41 2006 -0500
7c52c4b9
WD		 9156
9157 * Fixed PCI memory definitions
9158 Patch by Andy Fleming 17-Mar-2006
b985b5d6 9159
7c52c4b9
WD		 9160 Signed-off-by: Andy Fleming <[email protected]>
9161
9162commit 087454609e47295443af793a282cddcd91a5f49c
9163Author: Matthew McClintock <[email protected]>
2b2a40be 9164Date: Wed Jun 28 10:45:17 2006 -0500
7c52c4b9
WD		 9165
9166 * Added support for initializing second PCI bus on 85xx
9167 Patch by Andy Fleming 17-Mar-2006
b985b5d6 9168
7c52c4b9
WD		 9169 Signed-off-by: Andy Fleming <[email protected]>
9170
9171commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
9172Author: Matthew McClintock <[email protected]>
2b2a40be 9173Date: Wed Jun 28 10:44:49 2006 -0500
7c52c4b9
WD		 9174
9175 * Added PCI-X #defines for PCI-X initialization
9176 Patch by Andy Fleming on 17-Mar-2006
b985b5d6 9177
7c52c4b9
WD		 9178 Signed-off-by: Andy Fleming <[email protected]>
9179
9180commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
9181Author: Matthew McClintock <[email protected]>
2b2a40be 9182Date: Wed Jun 28 10:44:23 2006 -0500
7c52c4b9
WD		 9183
9184 * Made sure the code which disables prefetch for PCI devices
9185 sets the size of the prefetch region to 0
9186 Patch by Andy Fleming on 17-Mar-2006
b985b5d6 9187
7c52c4b9
WD		 9188 Signed-off-by: Andy Fleming <[email protected]>
9189
9190commit 40d5fa35d02df22580593bf0039ab173367e8ef0
9191Author: Matthew McClintock <[email protected]>
2b2a40be 9192Date: Wed Jun 28 10:43:36 2006 -0500
7c52c4b9
WD		 9193
9194 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
9195 Patch by Jon Loeliger 17-Jan-2006
b985b5d6 9196
7c52c4b9
WD		 9197 Signed-off-by: Jon Loeliger <[email protected]>
9198
9199commit be7e8b0cb5a0c49dc180075b96df296a893bf146
9200Author: Matthew McClintock <[email protected]>
2b2a40be 9201Date: Wed Jun 28 10:43:00 2006 -0500
7c52c4b9
WD		 9202
9203 * Removed the oftree.dts for stxxtx in light of the changes
9204 to the flat device tree handling code
9205 Patch by Matthew McClintock 26-June-2006
9206
9207commit 1b380ec225665e73959677f3893dc658c5925e05
9208Author: Matthew McClintock <[email protected]>
2b2a40be 9209Date: Wed Jun 28 10:42:24 2006 -0500
7c52c4b9
WD		 9210
9211 * Patch to modify ft_build.c to update flat device trees in place
9212 Patch by Matthew McClintock 26-June-2006
9213
9214commit 98a9c4d468a942a09ebe8979bec508017f3e4462
9215Author: Matthew McClintock <[email protected]>
2b2a40be 9216Date: Wed Jun 28 10:41:37 2006 -0500
7c52c4b9
WD		 9217
9218 * Modify bootm command to support booting with flat device trees
9219 Patch by Matthew McClintock 26-June-2006
9220
9221commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
9222Author: Jin Zhengxiong <[email protected]>
2b2a40be 9223Date: Wed Jun 28 08:43:56 2006 -0500
7c52c4b9
WD		 9224
9225 Change Id to symbolic name for RTL8139
b985b5d6 9226
7c52c4b9
WD		 9227 Signed-off-by: Jason Jin <[email protected]>
9228
9229commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
9230Author: Jin Zhengxiong-R64188 <[email protected]>
2b2a40be 9231Date: Tue Jun 27 18:12:10 2006 +0800
7c52c4b9
WD		 9232
9233 Fix RTL8139 in big endian
b985b5d6 9234
7c52c4b9
WD		 9235 signed-off-by: Jason Jin <[email protected]>
9236 signed-off-by: Wei Zhang <[email protected]>
9237
9238commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
9239Author: Jin Zhengxiong-R64188 <[email protected]>
2b2a40be 9240Date: Tue Jun 27 18:12:23 2006 +0800
7c52c4b9
WD		 9241
9242 Fix Tsec bug when no link
b985b5d6 9243
7c52c4b9
WD		 9244 When tftp a non-exist file from the tftp server, u-boot will check
9245 the link of all eth port. The original file will return wrong link
9246 state on the no link ports.
b985b5d6 9247
7c52c4b9
WD		 9248 signed-off-by: Jason Jin <[email protected]>
9249
9250commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
9251Author: Jin Zhengxiong-R64188 <[email protected]>
2b2a40be 9252Date: Tue Jun 27 18:12:02 2006 +0800
7c52c4b9
WD		 9253
9254 Fix bug for io_bar size during pci scan
b985b5d6 9255
7c52c4b9
WD		 9256 During the pci scan process, Some devices return bar_reponse with the
9257 highest bytes 0, such as the pci bridge in uli1575 return bar_response
9258 with 0xffffff, So the bar_size should be manually set under 64K.
b985b5d6 9259
7c52c4b9
WD		 9260 Signed-off-by: Jason Jin <[email protected]>
9261
9262commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
9263Author: Jin Zhengxiong-R64188 <[email protected]>
2b2a40be 9264Date: Tue Jun 27 18:11:54 2006 +0800
7c52c4b9
WD		 9265
9266 Enable PCIE1 for MPC8641HPCN board
b985b5d6 9267
7c52c4b9
WD		 9268 Signed-off-by: Jason Jin <[email protected]>
9269
9986bc3e
WD		 9270commit 99d70e3a47affb9bae041a2caece7cd516e213b3
9271Author: Wolfgang Denk <[email protected]>
9272Date: Mon Jun 26 11:06:00 2006 +0200
9273
9274 More code cleanup
9275
7c52c4b9
WD		 9276commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
9277Author: Jon Loeliger <[email protected]>
2b2a40be 9278Date: Thu Jun 22 08:51:46 2006 -0500
7c52c4b9
WD		 9279
9280 Fix bug in 8641hpcn reset command with no args.
b985b5d6 9281
7c52c4b9
WD		 9282 Signed-off-by: Haiying Wang <[email protected]>
9283 Acked-by: Jon Loeliger <[email protected]>
9284
9285commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
9286Author: Zhang Wei <[email protected]>
2b2a40be 9287Date: Tue Jun 20 17:47:15 2006 +0800
7c52c4b9
WD		 9288
9289 Reworked IRQ mapping in OF-tree.
9290
9291commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
9292Author: Jon Loeliger <[email protected]>
2b2a40be 9293Date: Thu Jun 15 21:33:37 2006 -0500
7c52c4b9
WD		 9294
9295 Do not enable address translation on secondary CPUs.
9296 Do not set up BATs on secondary CPUs. Let Linux do the nasty.
b985b5d6 9297
7c52c4b9
WD		 9298 Signed-off-by: Jon Loeliger <[email protected]>
9299
9986bc3e
WD		 9300commit 386eda022473394ad8f36b86f2bdc9b4cb816291
9301Author: Wolfgang Denk <[email protected]>
9302Date: Wed Jun 14 18:14:56 2006 +0200
9303
9304 Code cleanup
9305
9306commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70
9307Author: Wolfgang Denk <[email protected]>
9308Date: Wed Jun 14 17:45:53 2006 +0200
9309
9310 Various USB related patches
9311 - Add support for mpc8xx USB device.
9312 - Add support for Common Device Class - Abstract Control Model USB console.
9313 - Add support for flow control in USB slave devices.
9314 - Add support for switching between gserial and cdc_acm using environment.
9315 - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
9316 - Update usbcore slightly to ease host enumeration.
9317 - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
9318 - Add AdderUSB_config as a defconfig to enable usage of the USB console
9319 by default with the Adder87x U-Boot port.
9320 Patches by Bryan O'Donoghue <[email protected]>, 29 May 2006
9321
7c52c4b9
WD		 9322commit 8ecc971618f56029ad99d3516f8b297a6ed58971
9323Author: Jon Loeliger <[email protected]>
2b2a40be 9324Date: Wed Jun 7 10:53:55 2006 -0500
7c52c4b9
WD		 9325
9326 Fix a get_board_sys_clk() use-before-def warning.
b985b5d6 9327
7c52c4b9
WD		 9328 Signed-off-by: Jon Loeliger <[email protected]>
9329
9330commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
9331Author: Jon Loeliger <[email protected]>
2b2a40be 9332Date: Wed Jun 7 10:52:49 2006 -0500
7c52c4b9
WD		 9333
9334 Allow DTC path to be passed in.
b985b5d6 9335
7c52c4b9
WD		 9336 Signed-off-by: Jon Loeliger <[email protected]>
9337
9338commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
9339Author: Haiying Wang <[email protected]>
2b2a40be 9340Date: Tue Jun 6 16:54:29 2006 -0400
7c52c4b9
WD		 9341
9342 Modify the IRQ of DUART2
9343
9344commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
9345Author: Jon Loeliger <[email protected]>
2b2a40be 9346Date: Wed May 31 13:55:35 2006 -0500
7c52c4b9
WD		 9347
9348 Review cleanups.
b985b5d6 9349
7c52c4b9
WD		 9350 Signed-off-by: Jon Loeliger <[email protected]>
9351
9352commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
9353Author: Jon Loeliger <[email protected]>
2b2a40be 9354Date: Wed May 31 12:44:44 2006 -0500
7c52c4b9
WD		 9355
9356 White space cleanup.
9357 Some 80-column cleanups.
9358 Convert printf() to puts() where possible.
9359 Use #include "spd_sdram.h" as needed.
9360 Enhanced reset command usage message a bit.
b985b5d6 9361
7c52c4b9
WD		 9362 Signed-off-by: Jon Loeliger <[email protected]>
9363
9364commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
9365Author: Jon Loeliger <[email protected]>
2b2a40be 9366Date: Wed May 31 11:39:34 2006 -0500
7c52c4b9
WD		 9367
9368 Removed unneeded local_bus_init() from 8641HPCN board.
b985b5d6 9369
7c52c4b9
WD		 9370 Signed-off-by: Jon Loeliger <[email protected]>
9371
9372commit 4d3d729c16c392d2982d3266b659d333c927697d
9373Author: Jon Loeliger <[email protected]>
2b2a40be 9374Date: Wed May 31 11:24:28 2006 -0500
7c52c4b9
WD		 9375
9376 Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
b985b5d6 9377
7c52c4b9
WD		 9378 Signed-off-by: Jon Loeliger <[email protected]>
9379
9380commit b2a941de060350ad15878d8219825f4950e9bb8e
9381Author: Jon Loeliger <[email protected]>
2b2a40be 9382Date: Wed May 31 10:07:28 2006 -0500
7c52c4b9
WD		 9383
9384 Remove dead debug code.
b985b5d6 9385
7c52c4b9
WD		 9386 Signed-off-by: Jon Loeliger <[email protected]>
9387
9388commit 126aa70f10ba3d20e0a6f4d32328250513b77770
9389Author: Jon Loeliger <[email protected]>
2b2a40be 9390Date: Tue May 30 17:47:00 2006 -0500
7c52c4b9
WD		 9391
9392 Move mpc86xx PIXIS code to board directory
b985b5d6 9393
7c52c4b9
WD		 9394 First cut at moving the PIXIS platform code out of
9395 the 86xx cpu directory and into board/mpc8641hpcn
9396 where it belongs.
b985b5d6 9397
7c52c4b9 9398 Signed-off-by: Jon Loeliger <[email protected]>
3ca9122f 9399
9986bc3e
WD		 9400commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9
9401Author: Markus Klotzbuecher <[email protected]>
9402Date: Tue May 30 16:56:14 2006 +0200
9403
9404 Support generic OHCI support for the s3c24x0 cpu.
9405
7c52c4b9
WD		 9406commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
9407Author: Haiying Wang <[email protected]>
2b2a40be 9408Date: Tue May 30 09:10:32 2006 -0500
4c4aca81 9409
7c52c4b9 9410 Improve "reset" command's interaction with watchdog.
b985b5d6 9411
2b2a40be
WD		 9412 "reset altbank" will reset another bank WITHOUT watch dog timer enabled
9413 "reset altbank wd" will reset another bank WITH watch dog enabled
9414 "diswd" will disable watch dog after u-boot boots up successfully
b985b5d6 9415
7c52c4b9
WD		 9416 Signed-off-by: Haiying Wang <[email protected]>
9417
9418commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
9419Author: Haiying Wang <[email protected]>
2b2a40be 9420Date: Tue May 30 08:51:19 2006 -0500
7c52c4b9
WD		 9421
9422 Fix two SDRAM setup bugs.
b985b5d6 9423
2b2a40be
WD		 9424 Fix ECC setup bug.
9425 Enable 1T/2T based on number of DIMMs present.
b985b5d6 9426
7c52c4b9
WD		 9427 Signed-off-by: Haiying Wang <[email protected]>
9428
9429commit d11fec5015334deb2010e36ce00bb118cc5429a5
9430Author: Haiying Wang <[email protected]>
2b2a40be 9431Date: Fri May 26 10:24:48 2006 -0500
7c52c4b9
WD		 9432
9433 Add first draft of the MPC8641HPCN doc/README.
b985b5d6 9434
7c52c4b9
WD		 9435 Signed-off-by: Jon Loeliger <[email protected]>
9436
9437commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
9438Author: Haiying Wang <[email protected]>
2b2a40be 9439Date: Fri May 26 10:13:04 2006 -0500
7c52c4b9
WD		 9440
9441 Added pci@8000 block.
9442 Updated ethernet interrupt mappings (moved up 48).
9443 Cleaned up a few comments.
b985b5d6 9444
7c52c4b9
WD		 9445 Signed-off-by: Jon Loeliger <[email protected]>
9446
9447commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
9448Author: Haiying Wang <[email protected]>
2b2a40be 9449Date: Fri May 26 10:01:16 2006 -0500
7c52c4b9
WD		 9450
9451 Allow args on reset command.
b985b5d6 9452
7c52c4b9
WD		 9453 Signed-off-by: Jon Loeliger <[email protected]>
9454
9986bc3e
WD		 9455commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc
9456Author: Markus Klotzbuecher <[email protected]>
9457Date: Tue May 23 13:38:35 2006 +0200
9458
9459 Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some
9460 fixes to the latter.
9461
9462commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9
9463Author: Markus Klotzbuecher <[email protected]>
9464Date: Tue May 23 10:33:11 2006 +0200
9465
9466 More cleanup for the delta board and the generic usb_ohci driver. Added
9467 CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific
9468 initialization and cleanup hooks respectively.
9469
9470commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10
9471Author: Markus Klotzbuecher <[email protected]>
9472Date: Mon May 22 16:33:54 2006 +0200
9473
9474 This patch adds USB storage support for the delta board. This is the first
9475 board to make use of a generic OHCI driver, that calls hooks for board
9476 dependant initialization.
9477
7c52c4b9
WD		 9478commit 14e37081ff3cac7ebe6e93836523429853b6b292
9479Author: Jon Loeliger <[email protected]>
2b2a40be 9480Date: Fri May 19 13:28:39 2006 -0500
7c52c4b9
WD		 9481
9482 Change arbitration to round-robin for SMP linux.
9483
9484commit 9a655876e5995be80f49054e2509500e871e4d3a
9485Author: Jon Loeliger <[email protected]>
2b2a40be 9486Date: Fri May 19 13:26:34 2006 -0500
7c52c4b9
WD		 9487
9488 Enable dual DDR controllers and interleaving.
9489
9490commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
9491Author: Jon Loeliger <[email protected]>
2b2a40be 9492Date: Fri May 19 13:22:44 2006 -0500
7c52c4b9
WD		 9493
9494 Update 86xx address map and LAWBARs.
4819fad9 9495
7c52c4b9
WD		 9496commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
9497Author: Jon Loeliger <[email protected]>
2b2a40be 9498Date: Fri May 19 13:14:15 2006 -0500
fd27996d 9499
7c52c4b9
WD		 9500 Remove L2 Cache invalidate polling.
9501
9502commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
9503Author: Jon Loeliger <[email protected]>
2b2a40be 9504Date: Fri May 19 12:33:09 2006 -0500
7c52c4b9
WD		 9505
9506 Enable 2nd CPU and I2C.
135ae006 9507
7c52c4b9
WD		 9508commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
9509Author: Jon Loeliger <[email protected]>
2b2a40be 9510Date: Mon May 15 07:26:56 2006 -0500
966083e9 9511
7c52c4b9
WD		 9512 Update interrupt mapping.
9513
9514commit 6cfea33477b04b63ed47386ed1629529484c33ba
9515Author: Haiying Wang <[email protected]>
2b2a40be 9516Date: Wed May 10 09:38:06 2006 -0500
7c52c4b9
WD		 9517
9518 Remove unneeded INIT_RAM_LOCK cache twiddling.
9519 Correctly tracks r29 as global data pointer now.
b985b5d6 9520
7c52c4b9
WD		 9521 Signed-off-by: Haiying Wang <[email protected]>
9522
9523commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
9524Author: Jon Loeliger <[email protected]>
2b2a40be 9525Date: Wed May 10 09:33:07 2006 -0500
144f7795 9526
7c52c4b9 9527 Remove unnecessary flash.c file.
b9365a26 9528
7c52c4b9
WD		 9529commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
9530Author: Jon Loeliger <[email protected]>
2b2a40be 9531Date: Tue May 9 08:23:49 2006 -0500
87a5c73d 9532
7c52c4b9 9533 Get MPC8641HPCN flash images working.
b985b5d6 9534
2b2a40be
WD		 9535 Enable the CFI driver.
9536 Remove bogus LAWBAR7 cruft.
9537 Use correct TEXT_BASE, Fixup load script.
9538 Enable SPD EEPROM during DDR setup.
9539 Use generic RFC 1918 IP addresses by default.
029b6dc7 9540
7c52c4b9
WD		 9541commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
9542Author: Jon Loeliger <[email protected]>
2b2a40be 9543Date: Thu Apr 27 10:15:16 2006 -0500
b9365a26 9544
7c52c4b9
WD		 9545 Cleanup whitespaces and style issues.
9546 Removed //-style comments.
9547 Use 80-column lines.
9548 Remove trailing whitespace.
9549 Remove dead code and debug cruft.
b9365a26 9550
7c52c4b9
WD		 9551commit a2320a6bf8113a09544c42d160d10ac69d049a03
9552Author: Jon Loeliger <[email protected]>
2b2a40be 9553Date: Thu Apr 27 08:22:39 2006 -0500
b9365a26 9554
7c52c4b9 9555 Revert bad PCI prefetch limit change.
e644670b 9556
7c52c4b9
WD		 9557commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
9558Author: Jon Loeliger <[email protected]>
2b2a40be 9559Date: Wed Apr 26 17:58:56 2006 -0500
53dd6ce4 9560
7c52c4b9 9561 Initial support for MPC8641 HPCN board.
Empty description
This page took 1.17351 seconds and 4 git commands to generate.