[u-boot.git] / include / configs / gw_ventana.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (C) 2013 Gateworks Corporation
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/* SPL */
/* Location in NAND to read U-Boot from */
#define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)

/* Falcon Mode */
#define CONFIG_SYS_SPL_ARGS_ADDR	0x18000000

/* Falcon Mode - NAND support: args@17MB kernel@18MB */
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	(18 * SZ_1M)

/* Falcon Mode - MMC support: args@1MB kernel@2MB */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x800	/* 1MB */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	(CONFIG_CMD_SPL_WRITE_SIZE / 512)
#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x1000	/* 2MB */

#include "imx6_spl.h"                  /* common IMX6 SPL configuration */
#include "mx6_common.h"

#define CONFIG_MACH_TYPE	4520   /* Gateworks Ventana Platform */

/* Serial ATAG */
#define CONFIG_SERIAL_TAG

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)

/* Init Functions */

/* Driver Model */
#ifndef CONFIG_SPL_BUILD
#define CONFIG_DM_GPIO
#define CONFIG_DM_THERMAL
#endif

/* Thermal */
#define CONFIG_IMX_THERMAL

/* Serial */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	       UART2_BASE

#ifdef CONFIG_SPI_FLASH

/* SPI */
#ifdef CONFIG_CMD_SF
  #define CONFIG_SPI_FLASH_MTD
					     /* GPIO 3-19 (21248) */
#endif

#elif defined(CONFIG_SPL_NAND_SUPPORT)
/* Enable NAND support */
#ifdef CONFIG_CMD_NAND
  #define CONFIG_SYS_MAX_NAND_DEVICE	1
  #define CONFIG_SYS_NAND_BASE		0x40000000
  #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  #define CONFIG_SYS_NAND_ONFI_DETECTION

  /* DMA stuff, needed for GPMI/MXS NAND support */
#endif

#endif /* CONFIG_SPI_FLASH */

/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_I2C_GSC			0
#define CONFIG_I2C_EDID

/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR      0

/*
 * SATA Configs
 */
#ifdef CONFIG_CMD_SATA
  #define CONFIG_SYS_SATA_MAX_DEVICE	1
  #define CONFIG_DWC_AHSATA_PORT_ID	0
  #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
  #define CONFIG_LBA48
#endif

/*
 * PCI express
 */
#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCI_FIXUP_DEV
#define CONFIG_PCIE_IMX
#endif

/*
 * PMIC
 */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE100
#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
#define CONFIG_POWER_LTC3676
#define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c

/* Various command support */
#define CONFIG_CMD_UNZIP         /* gzwrite */

/* Ethernet support */
#define CONFIG_FEC_MXC
#define IMX_FEC_BASE             ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE      RGMII
#define CONFIG_FEC_MXC_PHYADDR   0
#define CONFIG_ARP_TIMEOUT       200UL

/* USB Configs */
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
#define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS      0
#define CONFIG_USBD_HS
#define CONFIG_NETCONSOLE

/* Framebuffer and LCD */
#define CONFIG_VIDEO_LOGO
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_HIDE_LOGO_VERSION  /* Custom config to hide U-boot version */

/* Miscellaneous configurable options */
#define CONFIG_HWCONFIG

/* Memory configuration */
#define CONFIG_SYS_MEMTEST_START       0x10000000
#define CONFIG_SYS_MEMTEST_END	       0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

/* Physical Memory Map */
#define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/*
 * MTD Command for mtdparts
 */

/* Persistent Environment Config */
#if defined(CONFIG_ENV_IS_IN_MMC)
  #define CONFIG_SYS_MMC_ENV_DEV         0
  #define CONFIG_SYS_MMC_ENV_PART        1
  #define CONFIG_ENV_OFFSET              (709 * SZ_1K)
  #define CONFIG_ENV_SIZE                (128 * SZ_1K)
  #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (128 * SZ_1K))
#elif defined(CONFIG_ENV_IS_IN_NAND)
  #define CONFIG_ENV_OFFSET              (16 * SZ_1M)
  #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
  #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
  #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 * SZ_1K))
  #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
  #define CONFIG_ENV_OFFSET		(512 * SZ_1K)
  #define CONFIG_ENV_SECT_SIZE		(64 * SZ_1K)
  #define CONFIG_ENV_SIZE		(8 * SZ_1K)
#endif

/* Environment */
#define CONFIG_IPADDR             192.168.1.1
#define CONFIG_SERVERIP           192.168.1.146

#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
	"pcidisable=1\0" \
	"splashpos=m,m\0" \
	"usb_pgood_delay=2000\0" \
	"console=ttymxc1\0" \
	"bootdevs=usb mmc sata flash\0" \
	"hwconfig=_UNKNOWN_\0" \
	"video=\0" \
	\
	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
	"disk=0\0" \
	"part=1\0" \
	\
	"fdt_high=0xffffffff\0" \
	"fdt_addr=0x18000000\0" \
	"initrd_high=0xffffffff\0" \
	"fixfdt=" \
		"fdt addr ${fdt_addr}\0" \
	"bootdir=boot\0" \
	"loadfdt=" \
		"if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
			"echo Loaded DTB from ${bootdir}/${fdt_file}; " \
			"run fixfdt; " \
		"elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
			"echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
			"run fixfdt; " \
		"elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
			"echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
			"run fixfdt; " \
		"fi\0" \
	\
	"fs=ext4\0" \
	"script=6x_bootscript-ventana\0" \
	"loadscript=" \
		"if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
			"source ${loadaddr}; " \
		"fi\0" \
	\
	"uimage=uImage\0" \
	"mmc_root=mmcblk0p1\0" \
	"mmc_boot=" \
		"setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
		"mmc dev ${disk} && mmc rescan && " \
		"setenv dtype mmc; run loadscript; " \
		"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=/dev/${mmc_root} rootfstype=${fs} " \
				"rootwait rw ${video} ${extra}; " \
			"if run loadfdt; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"bootm; " \
			"fi; " \
		"fi\0" \
	\
	"sata_boot=" \
		"setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
		"sata init && " \
		"setenv dtype sata; run loadscript; " \
		"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=/dev/sda1 rootfstype=${fs} " \
				"rootwait rw ${video} ${extra}; " \
			"if run loadfdt; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"bootm; " \
			"fi; " \
		"fi\0" \
	"usb_boot=" \
		"setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
		"usb start && usb dev ${disk} && " \
		"setenv dtype usb; run loadscript; " \
		"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=/dev/sda1 rootfstype=${fs} " \
				"rootwait rw ${video} ${extra}; " \
			"if run loadfdt; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"bootm; " \
			"fi; " \
		"fi\0"

#ifdef CONFIG_SPI_FLASH
	#define CONFIG_EXTRA_ENV_SETTINGS \
	CONFIG_EXTRA_ENV_SETTINGS_COMMON \
	"image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
	"image_uboot=ventana/u-boot_spi.imx\0" \
	\
	"spi_koffset=0x90000\0" \
	"spi_klen=0x200000\0" \
	\
	"spi_updateuboot=echo Updating uboot from " \
		"${serverip}:${image_uboot}...; " \
		"tftpboot ${loadaddr} ${image_uboot} && " \
		"sf probe && sf erase 0 80000 && " \
			"sf write ${loadaddr} 400 ${filesize}\0" \
	"spi_update=echo Updating OS from ${serverip}:${image_os} " \
		"to ${spi_koffset} ...; " \
		"tftp ${loadaddr} ${image_os} && " \
		"sf probe && " \
		"sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
	\
	"flash_boot=" \
		"if sf probe && " \
		"sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=/dev/mtdblock3 " \
				"rootfstype=squashfs,jffs2 " \
				"${video} ${extra}; " \
			"bootm; " \
		"fi\0"
#else
	#define CONFIG_EXTRA_ENV_SETTINGS \
	CONFIG_EXTRA_ENV_SETTINGS_COMMON \
	\
	"image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
	"nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
		"tftp ${loadaddr} ${image_rootfs} && " \
		"nand erase.part rootfs && " \
		"nand write ${loadaddr} rootfs ${filesize}\0" \
	\
	"flash_boot=" \
		"setenv fsload 'ubifsload'; " \
		"ubi part rootfs; " \
		"if ubi check boot; then " \
			"ubifsmount ubi0:boot; " \
			"setenv root ubi0:rootfs ubi.mtd=2 " \
				"rootfstype=squashfs,ubifs; " \
			"setenv bootdir; " \
		"elif ubi check rootfs; then " \
			"ubifsmount ubi0:rootfs; " \
			"setenv root ubi0:rootfs ubi.mtd=2 " \
				"rootfstype=ubifs; " \
		"fi; " \
		"setenv dtype nand; run loadscript; " \
		"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=${root} ${video} ${extra}; " \
			"if run loadfdt; then " \
				"ubifsumount; " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"ubifsumount; bootm; " \
			"fi; " \
		"fi\0"
#endif

#define CONFIG_BOOTCOMMAND \
	"for btype in ${bootdevs}; do " \
		"echo; echo Attempting ${btype} boot...; " \
		"if run ${btype}_boot; then; fi; " \
	"done"

#endif			       /* __CONFIG_H */
Commit	Line	Data
83d290c5	1	/* SPDX-License-Identifier: GPL-2.0+ */
59189a8b TH	2	/*
59189a8b TH	3	* Copyright (C) 2013 Gateworks Corporation
59189a8b TH	4	*/
	5
	6	#ifndef __CONFIG_H
	7	#define __CONFIG_H
	8
0cc11dea	9	/* SPL */
0cc11dea	10	/* Location in NAND to read U-Boot from */
55ff55e9	11	#define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * SZ_1M)
0cc11dea	12
53940a50	13	/* Falcon Mode */
53940a50	14	#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
53940a50 TH	15
53940a50 TH	16	/* Falcon Mode - NAND support: args@17MB kernel@18MB */
53940a50 TH	17	#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
	18
	19	/* Falcon Mode - MMC support: args@1MB kernel@2MB */
	20	#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */
	21	#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
	22	#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */
	23
0cc11dea	24	#include "imx6_spl.h" /* common IMX6 SPL configuration */
59189a8b	25	#include "mx6_common.h"
59189a8b TH	26
	27	#define CONFIG_MACH_TYPE 4520 /* Gateworks Ventana Platform */
	28
ea690917	29	/* Serial ATAG */
59189a8b	30	#define CONFIG_SERIAL_TAG
59189a8b TH	31
59189a8b TH	32	/* Size of malloc() pool */
55ff55e9	33	#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
59189a8b TH	34
59189a8b TH	35	/* Init Functions */
59189a8b	36
e1b4770c TH	37	/* Driver Model */
e1b4770c TH	38	#ifndef CONFIG_SPL_BUILD
e1b4770c	39	#define CONFIG_DM_GPIO
50de5088	40	#define CONFIG_DM_THERMAL
e1b4770c TH	41	#endif
e1b4770c TH	42
50de5088	43	/* Thermal */
1368f993	44	#define CONFIG_IMX_THERMAL
50de5088	45
59189a8b TH	46	/* Serial */
	47	#define CONFIG_MXC_UART
	48	#define CONFIG_MXC_UART_BASE UART2_BASE
	49
	50	#ifdef CONFIG_SPI_FLASH
	51
	52	/* SPI */
59189a8b	53	#ifdef CONFIG_CMD_SF
59189a8b	54	#define CONFIG_SPI_FLASH_MTD
59189a8b	55	/* GPIO 3-19 (21248) */
59189a8b TH	56	#endif
59189a8b TH	57
d883fcc6	58	#elif defined(CONFIG_SPL_NAND_SUPPORT)
59189a8b	59	/* Enable NAND support */
59189a8b	60	#ifdef CONFIG_CMD_NAND
59189a8b TH	61	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	62	#define CONFIG_SYS_NAND_BASE 0x40000000
	63	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	64	#define CONFIG_SYS_NAND_ONFI_DETECTION
	65
	66	/* DMA stuff, needed for GPMI/MXS NAND support */
59189a8b TH	67	#endif
	68
	69	#endif /* CONFIG_SPI_FLASH */
	70
59189a8b	71	/* I2C Configs */
59189a8b TH	72	#define CONFIG_SYS_I2C
59189a8b TH	73	#define CONFIG_SYS_I2C_MXC
03544c66 AA	74	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
03544c66 AA	75	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
f8cb101e	76	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
9c0fe83e TH	77	#define CONFIG_SYS_I2C_SPEED 100000
9c0fe83e TH	78	#define CONFIG_I2C_GSC 0
f6747cda	79	#define CONFIG_I2C_EDID
59189a8b TH	80
59189a8b TH	81	/* MMC Configs */
59189a8b	82	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
59189a8b	83
59189a8b TH	84	/*
	85	* SATA Configs
	86	*/
59189a8b	87	#ifdef CONFIG_CMD_SATA
59189a8b TH	88	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	89	#define CONFIG_DWC_AHSATA_PORT_ID 0
	90	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	91	#define CONFIG_LBA48
59189a8b TH	92	#endif
	93
	94	/*
	95	* PCI express
	96	*/
59189a8b	97	#ifdef CONFIG_CMD_PCI
59189a8b	98	#define CONFIG_PCI_SCAN_SHOW
dad08286	99	#define CONFIG_PCI_FIXUP_DEV
59189a8b TH	100	#define CONFIG_PCIE_IMX
	101	#endif
	102
	103	/*
	104	* PMIC
	105	*/
	106	#define CONFIG_POWER
	107	#define CONFIG_POWER_I2C
	108	#define CONFIG_POWER_PFUZE100
	109	#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
234d89da TH	110	#define CONFIG_POWER_LTC3676
234d89da TH	111	#define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c
59189a8b TH	112
59189a8b TH	113	/* Various command support */
f7d9fcd1	114	#define CONFIG_CMD_UNZIP /* gzwrite */
59189a8b TH	115
	116	/* Ethernet support */
	117	#define CONFIG_FEC_MXC
59189a8b TH	118	#define IMX_FEC_BASE ENET_BASE_ADDR
59189a8b TH	119	#define CONFIG_FEC_XCV_TYPE RGMII
59189a8b	120	#define CONFIG_FEC_MXC_PHYADDR 0
59189a8b TH	121	#define CONFIG_ARP_TIMEOUT 200UL
	122
	123	/* USB Configs */
59189a8b TH	124	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	125	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
	126	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	127	#define CONFIG_MXC_USB_FLAGS 0
59189a8b	128	#define CONFIG_USBD_HS
59189a8b	129	#define CONFIG_NETCONSOLE
59189a8b	130
7a278f9f	131	/* Framebuffer and LCD */
7a278f9f	132	#define CONFIG_VIDEO_LOGO
7a278f9f TH	133	#define CONFIG_IMX_HDMI
7a278f9f TH	134	#define CONFIG_IMX_VIDEO_SKIP
0a22c7f0 TH	135	#define CONFIG_VIDEO_BMP_LOGO
	136	#define CONFIG_SPLASH_SCREEN_ALIGN
	137	#define CONFIG_HIDE_LOGO_VERSION /* Custom config to hide U-boot version */
7a278f9f	138
59189a8b	139	/* Miscellaneous configurable options */
59189a8b TH	140	#define CONFIG_HWCONFIG
59189a8b TH	141
59189a8b TH	142	/* Memory configuration */
	143	#define CONFIG_SYS_MEMTEST_START 0x10000000
	144	#define CONFIG_SYS_MEMTEST_END 0x10010000
	145	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
59189a8b TH	146
59189a8b TH	147	/* Physical Memory Map */
59189a8b TH	148	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	149	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	150	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	151	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	152
	153	#define CONFIG_SYS_INIT_SP_OFFSET \
	154	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	155	#define CONFIG_SYS_INIT_SP_ADDR \
	156	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	157
59189a8b TH	158	/*
	159	* MTD Command for mtdparts
	160	*/
59189a8b TH	161
59189a8b TH	162	/* Persistent Environment Config */
59189a8b	163	#if defined(CONFIG_ENV_IS_IN_MMC)
59189a8b	164	#define CONFIG_SYS_MMC_ENV_DEV 0
b69999ef	165	#define CONFIG_SYS_MMC_ENV_PART 1
0a9c2150 TH	166	#define CONFIG_ENV_OFFSET (709 * SZ_1K)
	167	#define CONFIG_ENV_SIZE (128 * SZ_1K)
	168	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (128 * SZ_1K))
59189a8b	169	#elif defined(CONFIG_ENV_IS_IN_NAND)
55ff55e9 TH	170	#define CONFIG_ENV_OFFSET (16 * SZ_1M)
55ff55e9 TH	171	#define CONFIG_ENV_SECT_SIZE (128 * SZ_1K)
59189a8b	172	#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
55ff55e9	173	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 * SZ_1K))
59189a8b TH	174	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
59189a8b TH	175	#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
55ff55e9 TH	176	#define CONFIG_ENV_OFFSET (512 * SZ_1K)
	177	#define CONFIG_ENV_SECT_SIZE (64 * SZ_1K)
	178	#define CONFIG_ENV_SIZE (8 * SZ_1K)
59189a8b TH	179	#endif
	180
	181	/* Environment */
59189a8b TH	182	#define CONFIG_IPADDR 192.168.1.1
59189a8b TH	183	#define CONFIG_SERVERIP 192.168.1.146
59189a8b TH	184
59189a8b TH	185	#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
f4416579	186	"pcidisable=1\0" \
0a22c7f0	187	"splashpos=m,m\0" \
04171690	188	"usb_pgood_delay=2000\0" \
59189a8b TH	189	"console=ttymxc1\0" \
59189a8b TH	190	"bootdevs=usb mmc sata flash\0" \
5911c092	191	"hwconfig=_UNKNOWN_\0" \
59189a8b TH	192	"video=\0" \
59189a8b TH	193	\
43ede0bc TR	194	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
43ede0bc TR	195	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
7698cdfd TH	196	"disk=0\0" \
7698cdfd TH	197	"part=1\0" \
59189a8b TH	198	\
	199	"fdt_high=0xffffffff\0" \
	200	"fdt_addr=0x18000000\0" \
8cc25eb8	201	"initrd_high=0xffffffff\0" \
4df0bff3 TH	202	"fixfdt=" \
4df0bff3 TH	203	"fdt addr ${fdt_addr}\0" \
e2801a96	204	"bootdir=boot\0" \
59189a8b	205	"loadfdt=" \
1b740001 TH	206	"if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
1b740001 TH	207	"echo Loaded DTB from ${bootdir}/${fdt_file}; " \
4df0bff3	208	"run fixfdt; " \
1b740001 TH	209	"elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
1b740001 TH	210	"echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
4df0bff3	211	"run fixfdt; " \
1b740001 TH	212	"elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
1b740001 TH	213	"echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
4df0bff3	214	"run fixfdt; " \
59189a8b TH	215	"fi\0" \
59189a8b TH	216	\
543a4aba	217	"fs=ext4\0" \
e2801a96	218	"script=6x_bootscript-ventana\0" \
59189a8b	219	"loadscript=" \
e2801a96	220	"if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
50987095	221	"source ${loadaddr}; " \
59189a8b TH	222	"fi\0" \
59189a8b TH	223	\
e2801a96	224	"uimage=uImage\0" \
79942c4f	225	"mmc_root=mmcblk0p1\0" \
59189a8b	226	"mmc_boot=" \
543a4aba	227	"setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
7698cdfd	228	"mmc dev ${disk} && mmc rescan && " \
560e8b3f	229	"setenv dtype mmc; run loadscript; " \
e2801a96	230	"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
59189a8b	231	"setenv bootargs console=${console},${baudrate} " \
79942c4f	232	"root=/dev/${mmc_root} rootfstype=${fs} " \
59189a8b	233	"rootwait rw ${video} ${extra}; " \
4df0bff3	234	"if run loadfdt; then " \
59189a8b TH	235	"bootm ${loadaddr} - ${fdt_addr}; " \
	236	"else " \
	237	"bootm; " \
	238	"fi; " \
	239	"fi\0" \
	240	\
	241	"sata_boot=" \
543a4aba	242	"setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
7698cdfd	243	"sata init && " \
560e8b3f	244	"setenv dtype sata; run loadscript; " \
e2801a96	245	"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
59189a8b	246	"setenv bootargs console=${console},${baudrate} " \
543a4aba	247	"root=/dev/sda1 rootfstype=${fs} " \
59189a8b	248	"rootwait rw ${video} ${extra}; " \
4df0bff3	249	"if run loadfdt; then " \
59189a8b TH	250	"bootm ${loadaddr} - ${fdt_addr}; " \
	251	"else " \
	252	"bootm; " \
	253	"fi; " \
	254	"fi\0" \
	255	"usb_boot=" \
543a4aba	256	"setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
7698cdfd	257	"usb start && usb dev ${disk} && " \
560e8b3f	258	"setenv dtype usb; run loadscript; " \
e2801a96	259	"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
59189a8b	260	"setenv bootargs console=${console},${baudrate} " \
543a4aba	261	"root=/dev/sda1 rootfstype=${fs} " \
59189a8b	262	"rootwait rw ${video} ${extra}; " \
4df0bff3	263	"if run loadfdt; then " \
59189a8b TH	264	"bootm ${loadaddr} - ${fdt_addr}; " \
	265	"else " \
	266	"bootm; " \
	267	"fi; " \
	268	"fi\0"
	269
	270	#ifdef CONFIG_SPI_FLASH
	271	#define CONFIG_EXTRA_ENV_SETTINGS \
	272	CONFIG_EXTRA_ENV_SETTINGS_COMMON \
	273	"image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
	274	"image_uboot=ventana/u-boot_spi.imx\0" \
	275	\
	276	"spi_koffset=0x90000\0" \
	277	"spi_klen=0x200000\0" \
	278	\
	279	"spi_updateuboot=echo Updating uboot from " \
	280	"${serverip}:${image_uboot}...; " \
	281	"tftpboot ${loadaddr} ${image_uboot} && " \
	282	"sf probe && sf erase 0 80000 && " \
	283	"sf write ${loadaddr} 400 ${filesize}\0" \
	284	"spi_update=echo Updating OS from ${serverip}:${image_os} " \
	285	"to ${spi_koffset} ...; " \
	286	"tftp ${loadaddr} ${image_os} && " \
	287	"sf probe && " \
	288	"sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
	289	\
	290	"flash_boot=" \
	291	"if sf probe && " \
	292	"sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
	293	"setenv bootargs console=${console},${baudrate} " \
	294	"root=/dev/mtdblock3 " \
	295	"rootfstype=squashfs,jffs2 " \
	296	"${video} ${extra}; " \
	297	"bootm; " \
	298	"fi\0"
	299	#else
	300	#define CONFIG_EXTRA_ENV_SETTINGS \
	301	CONFIG_EXTRA_ENV_SETTINGS_COMMON \
59189a8b	302	\
e2801a96	303	"image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
59189a8b TH	304	"nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
	305	"tftp ${loadaddr} ${image_rootfs} && " \
	306	"nand erase.part rootfs && " \
	307	"nand write ${loadaddr} rootfs ${filesize}\0" \
	308	\
	309	"flash_boot=" \
	310	"setenv fsload 'ubifsload'; " \
e2801a96 TH	311	"ubi part rootfs; " \
	312	"if ubi check boot; then " \
	313	"ubifsmount ubi0:boot; " \
	314	"setenv root ubi0:rootfs ubi.mtd=2 " \
	315	"rootfstype=squashfs,ubifs; " \
	316	"setenv bootdir; " \
	317	"elif ubi check rootfs; then " \
	318	"ubifsmount ubi0:rootfs; " \
	319	"setenv root ubi0:rootfs ubi.mtd=2 " \
	320	"rootfstype=ubifs; " \
	321	"fi; " \
560e8b3f	322	"setenv dtype nand; run loadscript; " \
e2801a96	323	"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
59189a8b	324	"setenv bootargs console=${console},${baudrate} " \
e2801a96	325	"root=${root} ${video} ${extra}; " \
4df0bff3	326	"if run loadfdt; then " \
59189a8b TH	327	"ubifsumount; " \
	328	"bootm ${loadaddr} - ${fdt_addr}; " \
	329	"else " \
	330	"ubifsumount; bootm; " \
	331	"fi; " \
	332	"fi\0"
	333	#endif
	334
	335	#define CONFIG_BOOTCOMMAND \
	336	"for btype in ${bootdevs}; do " \
	337	"echo; echo Attempting ${btype} boot...; " \
	338	"if run ${btype}_boot; then; fi; " \
	339	"done"
	340
59189a8b	341	#endif /* __CONFIG_H */