[u-boot.git] / include / configs / pm9g45.h

/*
 * (C) Copyright 2010
 * Ilko Iliev <[email protected]>
 * Asen Dimov <[email protected]>
 * Ronetix GmbH <www.ronetix.at>
 *
 * (C) Copyright 2007-2008
 * Stelian Pop <[email protected]>
 * Lead Tech Design <www.leadtechdesign.com>
 *
 * Configuation settings for the PM9G45 board.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_ARM926EJS	1	/* This is an ARM926EJS Core */
#define CONFIG_PM9G45		1	/* It's an Ronetix PM9G45 */
#define CONFIG_AT91SAM9G45	1	/* It's an Atmel AT91SAM9G45 SoC */

/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_MAIN_CLOCK	12000000 /* from 12 MHz crystal */
#define CONFIG_SYS_HZ			1000

#define CONFIG_ARCH_CPU_INIT

#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG	1

#define CONFIG_SKIP_LOWLEVEL_INIT

/*
 * Hardware drivers
 */
#define CONFIG_AT91_GPIO	1
#define CONFIG_ATMEL_USART	1
#define CONFIG_USART3		1	/* USART 3 is DBGU */

#define CONFIG_SYS_USE_NANDFLASH	1

/* LED */
#define CONFIG_AT91_LED
#define	CONFIG_RED_LED		AT91_PIO_PORTD, 31 /* this is the user1 led */
#define	CONFIG_GREEN_LED	AT91_PIO_PORTD, 0 /* this is the user2 led */

#define CONFIG_BOOTDELAY	3

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE	1
#define CONFIG_BOOTP_BOOTPATH		1
#define CONFIG_BOOTP_GATEWAY		1
#define CONFIG_BOOTP_HOSTNAME		1

/*
 * Command line configuration.
 */
#include <config_cmd_default.h>
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_IMLS

#define CONFIG_CMD_PING		1
#define CONFIG_CMD_DHCP		1
#define CONFIG_CMD_NAND		1
#define CONFIG_CMD_USB		1

#define CONFIG_CMD_JFFS2		1
#define CONFIG_JFFS2_CMDLINE		1
#define CONFIG_JFFS2_NAND		1
#define CONFIG_JFFS2_DEV		"nand0" /* NAND dev jffs2 lives on */
#define CONFIG_JFFS2_PART_OFFSET	0	/* start of jffs2 partition */
#define CONFIG_JFFS2_PART_SIZE		(256 * 1024 * 1024) /* partition */

/* SDRAM */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			0x70000000
#define PHYS_SDRAM_SIZE			0x08000000	/* 128 megs */

/* NOR flash, not available */
#define CONFIG_SYS_NO_FLASH		1
#undef CONFIG_CMD_FLASH

/* NAND flash */
#ifdef CONFIG_CMD_NAND
#define CONFIG_NAND_MAX_CHIPS		1
#define CONFIG_NAND_ATMEL
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		0x40000000
#define CONFIG_SYS_NAND_DBW_8		1
/* our ALE is AD21 */
#define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
/* our CLE is AD22 */
#define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
#define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIO_PORTC, 14
#define CONFIG_SYS_NAND_READY_PIN	AT91_PIO_PORTD, 3

#endif

/* Ethernet */
#define CONFIG_MACB			1
#define CONFIG_RMII			1
#define CONFIG_NET_MULTI		1
#define CONFIG_NET_RETRY_COUNT		20
#define CONFIG_RESET_PHY_R		1

/* USB */
#define CONFIG_USB_ATMEL
#define CONFIG_USB_OHCI_NEW		1
#define CONFIG_DOS_PARTITION		1
#define CONFIG_SYS_USB_OHCI_CPU_INIT	1
#define CONFIG_SYS_USB_OHCI_REGS_BASE	0x00700000 /* _UHP_OHCI_BASE */
#define CONFIG_SYS_USB_OHCI_SLOT_NAME	"at91sam9g45"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
#define CONFIG_USB_STORAGE		1

/* board specific(not enough SRAM) */
#define CONFIG_AT91SAM9G45_LCD_BASE	PHYS_SDRAM + 0xE00000

#define CONFIG_SYS_LOAD_ADDR		PHYS_SDRAM + 0x2000000 /* load addr */

#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM
#define CONFIG_SYS_MEMTEST_END		CONFIG_AT91SAM9G45_LCD_BASE

/* bootstrap + u-boot + env + linux in nandflash */
#define CONFIG_ENV_IS_IN_NAND		1
#define CONFIG_ENV_OFFSET		0x60000
#define CONFIG_ENV_OFFSET_REDUND	0x80000
#define CONFIG_ENV_SIZE			0x20000		/* 1 sector = 128 kB */
#define CONFIG_BOOTCOMMAND	"nand read 0x72000000 0x200000 0x200000; bootm"
#define CONFIG_BOOTARGS		"fbcon=rotate:3 console=tty0 " \
				"console=ttyS0,115200 " \
				"root=/dev/mtdblock4 " \
				"mtdparts=atmel_nand:128k(bootstrap)ro," \
				"256k(uboot)ro,1664k(env)," \
				"2M(linux)ro,-(root) rw " \
				"rootfstype=jffs2"

#define CONFIG_BAUDRATE			115200
#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }

#define CONFIG_SYS_PROMPT		"U-Boot> "
#define CONFIG_SYS_CBSIZE		256
#define CONFIG_SYS_MAXARGS		16
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_LONGHELP		1
#define CONFIG_CMDLINE_EDITING		1
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024,\
					0x1000)

#define CONFIG_STACKSIZE		(32*1024)	/* regular stack */

#ifdef CONFIG_USE_IRQ
#error CONFIG_USE_IRQ not supported
#endif

#endif
Commit	Line	Data
b5d289fc AD	1	/*
	2	* (C) Copyright 2010
	3	* Ilko Iliev <[email protected]>
	4	* Asen Dimov <[email protected]>
	5	* Ronetix GmbH <www.ronetix.at>
	6	*
	7	* (C) Copyright 2007-2008
	8	* Stelian Pop <[email protected]>
	9	* Lead Tech Design <www.leadtechdesign.com>
	10	*
	11	* Configuation settings for the PM9G45 board.
	12	*
	13	* See file CREDITS for list of people who contributed to this
	14	* project.
	15	*
	16	* This program is free software; you can redistribute it and/or
	17	* modify it under the terms of the GNU General Public License as
	18	* published by the Free Software Foundation; either version 2 of
	19	* the License, or (at your option) any later version.
	20	*
	21	* This program is distributed in the hope that it will be useful,
	22	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	23	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	24	* GNU General Public License for more details.
	25	*
	26	* You should have received a copy of the GNU General Public License
	27	* along with this program; if not, write to the Free Software
	28	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	29	* MA 02111-1307 USA
	30	*/
	31
	32	#ifndef __CONFIG_H
	33	#define __CONFIG_H
	34
	35	#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
	36	#define CONFIG_PM9G45 1 /* It's an Ronetix PM9G45 */
	37	#define CONFIG_AT91SAM9G45 1 /* It's an Atmel AT91SAM9G45 SoC */
	38
	39	/* ARM asynchronous clock */
	40	#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
	41	#define CONFIG_SYS_HZ 1000
	42
	43	#define CONFIG_ARCH_CPU_INIT
	44
	45	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	46	#define CONFIG_SETUP_MEMORY_TAGS 1
	47	#define CONFIG_INITRD_TAG 1
	48
	49	#define CONFIG_SKIP_LOWLEVEL_INIT
b5d289fc AD	50
	51	/*
	52	* Hardware drivers
	53	*/
	54	#define CONFIG_AT91_GPIO 1
	55	#define CONFIG_ATMEL_USART 1
	56	#define CONFIG_USART3 1 /* USART 3 is DBGU */
	57
	58	#define CONFIG_SYS_USE_NANDFLASH 1
	59
	60	/* LED */
	61	#define CONFIG_AT91_LED
	62	#define CONFIG_RED_LED AT91_PIO_PORTD, 31 /* this is the user1 led */
	63	#define CONFIG_GREEN_LED AT91_PIO_PORTD, 0 /* this is the user2 led */
	64
	65	#define CONFIG_BOOTDELAY 3
	66
	67	/*
	68	* BOOTP options
	69	*/
	70	#define CONFIG_BOOTP_BOOTFILESIZE 1
	71	#define CONFIG_BOOTP_BOOTPATH 1
	72	#define CONFIG_BOOTP_GATEWAY 1
	73	#define CONFIG_BOOTP_HOSTNAME 1
	74
	75	/*
	76	* Command line configuration.
	77	*/
	78	#include <config_cmd_default.h>
	79	#undef CONFIG_CMD_FPGA
	80	#undef CONFIG_CMD_IMLS
	81
	82	#define CONFIG_CMD_PING 1
	83	#define CONFIG_CMD_DHCP 1
	84	#define CONFIG_CMD_NAND 1
	85	#define CONFIG_CMD_USB 1
	86
	87	#define CONFIG_CMD_JFFS2 1
	88	#define CONFIG_JFFS2_CMDLINE 1
	89	#define CONFIG_JFFS2_NAND 1
	90	#define CONFIG_JFFS2_DEV "nand0" /* NAND dev jffs2 lives on */
	91	#define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */
	92	#define CONFIG_JFFS2_PART_SIZE (256 * 1024 * 1024) /* partition */
	93
	94	/* SDRAM */
	95	#define CONFIG_NR_DRAM_BANKS 1
	96	#define PHYS_SDRAM 0x70000000
	97	#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */
	98
	99	/* NOR flash, not available */
	100	#define CONFIG_SYS_NO_FLASH 1
	101	#undef CONFIG_CMD_FLASH
	102
	103	/* NAND flash */
	104	#ifdef CONFIG_CMD_NAND
	105	#define CONFIG_NAND_MAX_CHIPS 1
	106	#define CONFIG_NAND_ATMEL
	107	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	108	#define CONFIG_SYS_NAND_BASE 0x40000000
	109	#define CONFIG_SYS_NAND_DBW_8 1
	110	/* our ALE is AD21 */
	111	#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
	112	/* our CLE is AD22 */
	113	#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
114	#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTC, 14
115	#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTD, 3
116
117	#endif
118
119	/* Ethernet */
120	#define CONFIG_MACB 1
121	#define CONFIG_RMII 1
122	#define CONFIG_NET_MULTI 1
123	#define CONFIG_NET_RETRY_COUNT 20
124	#define CONFIG_RESET_PHY_R 1
125
126	/* USB */
127	#define CONFIG_USB_ATMEL
128	#define CONFIG_USB_OHCI_NEW 1
129	#define CONFIG_DOS_PARTITION 1
130	#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
131	#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 /* _UHP_OHCI_BASE */
132	#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g45"
133	#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
134	#define CONFIG_USB_STORAGE 1
135
136	/* board specific(not enough SRAM) */
137	#define CONFIG_AT91SAM9G45_LCD_BASE PHYS_SDRAM + 0xE00000
138
139	#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM + 0x2000000 /* load addr */
140
141	#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
142	#define CONFIG_SYS_MEMTEST_END CONFIG_AT91SAM9G45_LCD_BASE
143
144	/* bootstrap + u-boot + env + linux in nandflash */
145	#define CONFIG_ENV_IS_IN_NAND 1
146	#define CONFIG_ENV_OFFSET 0x60000
147	#define CONFIG_ENV_OFFSET_REDUND 0x80000
148	#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
149	#define CONFIG_BOOTCOMMAND "nand read 0x72000000 0x200000 0x200000; bootm"
150	#define CONFIG_BOOTARGS "fbcon=rotate:3 console=tty0 " \
151	"console=ttyS0,115200 " \
152	"root=/dev/mtdblock4 " \
153	"mtdparts=atmel_nand:128k(bootstrap)ro," \
154	"256k(uboot)ro,1664k(env)," \
155	"2M(linux)ro,-(root) rw " \
156	"rootfstype=jffs2"
157
158	#define CONFIG_BAUDRATE 115200
159	#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
160
161	#define CONFIG_SYS_PROMPT "U-Boot> "
162	#define CONFIG_SYS_CBSIZE 256
163	#define CONFIG_SYS_MAXARGS 16
164	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
165	sizeof(CONFIG_SYS_PROMPT) + 16)
166	#define CONFIG_SYS_LONGHELP 1
167	#define CONFIG_CMDLINE_EDITING 1
168	#define CONFIG_AUTO_COMPLETE
169	#define CONFIG_SYS_HUSH_PARSER
170	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
171
172	/*
173	* Size of malloc() pool
174	*/
175	#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024,\
176	0x1000)
b5d289fc AD	177
	178	#define CONFIG_STACKSIZE (321024) / regular stack */
	179
	180	#ifdef CONFIG_USE_IRQ
	181	#error CONFIG_USE_IRQ not supported
	182	#endif
	183
	184	#endif