[u-boot.git] / include / configs / XPEDITE5200.h

/*
 * Copyright 2008 Extreme Engineering Solutions, Inc.
 * Copyright 2004-2008 Freescale Semiconductor, Inc.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * xpedite5200 board configuration file
 */
#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 */
#define CONFIG_BOOKE		1	/* BOOKE */
#define CONFIG_E500		1	/* BOOKE e500 family */
#define CONFIG_MPC85xx		1	/* MPC8540/60/55/41/48 */
#define CONFIG_MPC8548		1
#define CONFIG_XPEDITE5200	1
#define CONFIG_SYS_BOARD_NAME	"XPedite5200"
#define CONFIG_BOARD_EARLY_INIT_R	/* Call board_pre_init */
#define CONFIG_RELOC_FIXUP_WORKS	/* Fully relocate to SDRAM */

#define CONFIG_PCI		1	/* Enable PCI/PCIE */
#define CONFIG_PCI_PNP		1	/* do pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup */
#define CONFIG_PCI1		1	/* PCI controller 1 */
#define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
#define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
#define CONFIG_FSL_LAW		1	/* Use common FSL init code */

/*
 * DDR config
 */
#define CONFIG_FSL_DDR2
#undef CONFIG_FSL_DDR_INTERACTIVE
#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup */
#define CONFIG_DDR_SPD
#define CONFIG_MEM_INIT_VALUE		0xdeadbeef
#define SPD_EEPROM_ADDRESS		0x54
#define CONFIG_NUM_DDR_CONTROLLERS	1
#define CONFIG_DIMM_SLOTS_PER_CTLR	1
#define CONFIG_CHIP_SELECTS_PER_CTRL	2
#define CONFIG_DDR_ECC
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
#define CONFIG_VERY_BIG_RAM

#define CONFIG_SYS_CLK_FREQ	66666666

/*
 * These can be toggled for performance analysis, otherwise use default.
 */
#define CONFIG_L2_CACHE			/* toggle L2 cache */
#define CONFIG_BTB			/* toggle branch predition */
#define CONFIG_ENABLE_36BIT_PHYS	1

/*
 * Base addresses -- Note these are effective addresses where the
 * actual resources get mapped (not physical addresses)
 */
#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
#define CONFIG_SYS_CCSRBAR		0xef000000	/* relocated CCSRBAR */
#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
#define CONFIG_SYS_PCI1_ADDR	(CONFIG_SYS_CCSRBAR + 0x8000)

/*
 * Diagnostics
 */
#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_SYS_MEMTEST_START	0x10000000
#define CONFIG_SYS_MEMTEST_END		0x20000000

/*
 * Memory map
 * 0x0000_0000	0x7fff_ffff	DDR			2G Cacheable
 * 0x8000_0000	0xbfff_ffff	PCI1 Mem		1G non-cacheable
 * 0xe000_0000	0xe7ff_ffff	SRAM/SSRAM/L1 Cache	128M non-cacheable
 * 0xe800_0000	0xe87f_ffff	PCI1 IO			8M non-cacheable
 * 0xef00_0000	0xef0f_ffff	CCSR/IMMR		1M non-cacheable
 * 0xef80_0000	0xef8f_ffff	NAND Flash		1M non-cacheable
 * 0xf800_0000	0xfbff_ffff	NOR Flash 2		64M non-cacheable
 * 0xfc00_0000	0xffff_ffff	NOR Flash 1		64M non-cacheable
 */

#define CONFIG_SYS_LBC_LCRR	(LCRR_CLKDIV_4 | LCRR_EADC_3)

/*
 * NAND flash configuration
 */
#define CONFIG_SYS_NAND_BASE		0xef800000
#define CONFIG_SYS_NAND_BASE2		0xef840000 /* Unused at this time */
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_NAND_ACTL
#define CONFIG_SYS_NAND_ACTL_CLE	(1 << 3)	/* ADDR3 is CLE */
#define CONFIG_SYS_NAND_ACTL_ALE	(1 << 4)	/* ADDR4 is ALE */
#define CONFIG_SYS_NAND_ACTL_NCE	(0)		/* NCE not controlled by ADDR */
#define CONFIG_SYS_NAND_ACTL_DELAY	25

/*
 * NOR flash configuration
 */
#define CONFIG_SYS_FLASH_BASE		0xfc000000
#define CONFIG_SYS_FLASH_BASE2		0xf8000000
#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2}
#define CONFIG_SYS_MAX_FLASH_BANKS	2		/* number of banks */
#define CONFIG_SYS_MAX_FLASH_SECT	1024		/* sectors per device */
#define CONFIG_SYS_FLASH_ERASE_TOUT	60000		/* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Flash Write Timeout (ms) */
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
#define CONFIG_SYS_FLASH_AUTOPROTECT_LIST	{ {0xfff40000, 0xc0000}, \
						  {0xfbf40000, 0xc0000} }
#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */

/*
 * Chip select configuration
 */
/* NOR Flash 0 on CS0 */
#define CONFIG_SYS_BR0_PRELIM	(CONFIG_SYS_FLASH_BASE	| \
				 BR_PS_16		| \
				 BR_V)
#define CONFIG_SYS_OR0_PRELIM	(OR_AM_64MB		| \
				 OR_GPCM_ACS_DIV4	| \
				 OR_GPCM_SCY_8)

/* NOR Flash 1 on CS1 */
#define CONFIG_SYS_BR1_PRELIM	(CONFIG_SYS_FLASH_BASE2	| \
				 BR_PS_16		| \
				 BR_V)
#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM

/* NAND flash on CS2 */
#define CONFIG_SYS_BR2_PRELIM	(CONFIG_SYS_NAND_BASE	| \
				 BR_PS_8		| \
				 BR_V)

/* NAND flash on CS2 */
#define CONFIG_SYS_OR2_PRELIM	(OR_AM_256KB		| \
				 OR_GPCM_BCTLD		| \
				 OR_GPCM_CSNT		| \
				 OR_GPCM_ACS_DIV4	| \
				 OR_GPCM_SCY_4		| \
				 OR_GPCM_TRLX		| \
				 OR_GPCM_EHTR)

/* NAND flash on CS3 */
#define CONFIG_SYS_BR3_PRELIM	(CONFIG_SYS_NAND_BASE2	| \
				 BR_PS_8		| \
				 BR_V)
#define CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR2_PRELIM

/*
 * Use L1 as initial stack
 */
#define CONFIG_SYS_INIT_RAM_LOCK	1
#define CONFIG_SYS_INIT_RAM_ADDR	0xe0000000
#define CONFIG_SYS_INIT_RAM_END		0x4000

#define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)	/* Reserve 512 KB for Mon */
#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)	/* Reserved for malloc */

/*
 * Serial Port
 */
#define CONFIG_CONS_INDEX		1
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1
#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
#define CONFIG_SYS_BAUDRATE_TABLE	\
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
#define CONFIG_BAUDRATE			115200
#define CONFIG_LOADS_ECHO		1	/* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */

/*
 * Use the HUSH parser
 */
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "

/*
 * Pass open firmware flat tree
 */
#define CONFIG_OF_LIBFDT		1
#define CONFIG_OF_BOARD_SETUP		1
#define CONFIG_OF_STDOUT_VIA_ALIAS	1

#define CONFIG_SYS_64BIT_VSPRINTF	1
#define CONFIG_SYS_64BIT_STRTOUL	1

/*
 * I2C
 */
#define CONFIG_FSL_I2C				/* Use FSL common I2C driver */
#define CONFIG_HARD_I2C				/* I2C with hardware support */
#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE		0x7F
#define CONFIG_SYS_I2C_OFFSET		0x3000
#define CONFIG_SYS_I2C2_OFFSET		0x3100
#define CONFIG_I2C_MULTI_BUS

/* I2C EEPROM */
#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	6	/* 64 byte pages */
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* take up to 10 msec */

/* I2C RTC */
#define CONFIG_RTC_M41T11			1
#define CONFIG_SYS_I2C_RTC_ADDR			0x68
#define CONFIG_SYS_M41T11_BASE_YEAR		2000

/* GPIO */
#define CONFIG_PCA953X
#define CONFIG_SYS_I2C_PCA953X_ADDR0		0x18
#define CONFIG_SYS_I2C_PCA953X_ADDR1		0x19
#define CONFIG_SYS_I2C_PCA953X_ADDR		CONFIG_SYS_I2C_PCA953X_ADDR0

/* PCA957 @ 0x18 */
#define CONFIG_SYS_PCA953X_BRD_CFG0		0x01
#define CONFIG_SYS_PCA953X_BRD_CFG1		0x02
#define CONFIG_SYS_PCA953X_BRD_CFG2		0x04
#define CONFIG_SYS_PCA953X_XMC_ROOT0		0x08
#define CONFIG_SYS_PCA953X_FLASH_PASS_CS	0x10
#define CONFIG_SYS_PCA953X_FLASH_WP		0x20
#define CONFIG_SYS_PCA953X_MONARCH		0x40
#define CONFIG_SYS_PCA953X_EREADY		0x80

/* PCA957 @ 0x19 */
#define CONFIG_SYS_PCA953X_P14_IO0		0x01
#define CONFIG_SYS_PCA953X_P14_IO1		0x02
#define CONFIG_SYS_PCA953X_P14_IO2		0x04
#define CONFIG_SYS_PCA953X_P14_IO3		0x08
#define CONFIG_SYS_PCA953X_P14_IO4		0x10
#define CONFIG_SYS_PCA953X_P14_IO5		0x20
#define CONFIG_SYS_PCA953X_P14_IO6		0x40
#define CONFIG_SYS_PCA953X_P14_IO7		0x80

/*
 * General PCI
 * Memory space is mapped 1-1, but I/O space must start from 0.
 */
#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
#define CONFIG_SYS_PCI1_MEM_SIZE	0x40000000	/* 1G */
#define CONFIG_SYS_PCI1_IO_BASE		0x00000000
#define CONFIG_SYS_PCI1_IO_PHYS		0xe8000000
#define CONFIG_SYS_PCI1_IO_SIZE		0x00800000	/* 1M */

/*
 * Networking options
 */
#define CONFIG_TSEC_ENET		/* tsec ethernet support */
#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
#define CONFIG_NET_MULTI	1
#define CONFIG_MII		1	/* MII PHY management */
#define CONFIG_ETHPRIME		"eTSEC1"

#define CONFIG_TSEC1		1
#define CONFIG_TSEC1_NAME	"eTSEC1"
#define TSEC1_FLAGS		TSEC_GIGABIT
#define TSEC1_PHY_ADDR		1
#define TSEC1_PHYIDX		0
#define CONFIG_HAS_ETH0

#define CONFIG_TSEC2		1
#define CONFIG_TSEC2_NAME	"eTSEC2"
#define TSEC2_FLAGS		TSEC_GIGABIT
#define TSEC2_PHY_ADDR		2
#define TSEC2_PHYIDX		0
#define CONFIG_HAS_ETH1

#define CONFIG_TSEC3	1
#define CONFIG_TSEC3_NAME	"eTSEC3"
#define TSEC3_FLAGS		TSEC_GIGABIT
#define TSEC3_PHY_ADDR		3
#define TSEC3_PHYIDX		0
#define CONFIG_HAS_ETH2

#define CONFIG_TSEC4	1
#define CONFIG_TSEC4_NAME	"eTSEC4"
#define TSEC4_FLAGS		TSEC_GIGABIT
#define TSEC4_PHY_ADDR		4
#define TSEC4_PHYIDX		0
#define CONFIG_HAS_ETH3

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY

/*
 * Command configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ELF
#define CONFIG_CMD_SAVEENV
#define CONFIG_CMD_FLASH
#define CONFIG_CMD_I2C
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_MII
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NET
#define CONFIG_CMD_PCA953X
#define CONFIG_CMD_PCA953X_INFO
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_SNTP

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
#define CONFIG_CMDLINE_EDITING	1		/* add command line history	*/
#define CONFIG_LOADADDR		0x1000000	/* default location for tftp and bootm */
#define CONFIG_BOOTDELAY	3		/* -1 disables auto-boot */
#define CONFIG_PANIC_HANG			/* do not reset board on panic */
#define CONFIG_PREBOOT				/* enable preboot variable */
#define CONFIG_FIT		1
#define CONFIG_FIT_VERBOSE	1
#define CONFIG_INTEGRITY			/* support booting INTEGRITY OS */
#define CONFIG_INTERRUPTS		/* enable pci, srio, ddr interrupts */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 16 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ	(16 << 20)	/* Initial Memory map for Linux*/
#define CONFIG_SYS_BOOTM_LEN	(16 << 20)	/* Increase max gunzip size */

/*
 * Boot Flags
 */
#define BOOTFLAG_COLD		0x01		/* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM		0x02		/* Software reboot */

/*
 * Environment Configuration
 */
#define CONFIG_ENV_IS_IN_FLASH	1
#define CONFIG_ENV_SECT_SIZE	0x20000		/* 128k (one sector) for env */
#define CONFIG_ENV_SIZE		0x8000
#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - (256 * 1024))

/*
 * Flash memory map:
 * fff80000 - ffffffff     Pri U-Boot (512 KB)
 * fff40000 - fff7ffff     Pri U-Boot Environment (256 KB)
 * fff00000 - fff3ffff     Pri FDT (256KB)
 * fef00000 - ffefffff     Pri OS image (16MB)
 * fc000000 - feefffff     Pri OS Use/Filesystem (47MB)
 *
 * fbf80000 - fbffffff     Sec U-Boot (512 KB)
 * fbf40000 - fbf7ffff     Sec U-Boot Environment (256 KB)
 * fbf00000 - fbf3ffff     Sec FDT (256KB)
 * faf00000 - fbefffff     Sec OS image (16MB)
 * f8000000 - faefffff     Sec OS Use/Filesystem (47MB)
 */
#define CONFIG_UBOOT1_ENV_ADDR	MK_STR(0xfff80000)
#define CONFIG_UBOOT2_ENV_ADDR	MK_STR(0xfbf80000)
#define CONFIG_FDT1_ENV_ADDR	MK_STR(0xfff00000)
#define CONFIG_FDT2_ENV_ADDR	MK_STR(0xfbf00000)
#define CONFIG_OS1_ENV_ADDR	MK_STR(0xfef00000)
#define CONFIG_OS2_ENV_ADDR	MK_STR(0xfaf00000)

#define CONFIG_PROG_UBOOT1						\
	"$download_cmd $loadaddr $ubootfile; "				\
	"if test $? -eq 0; then "					\
		"protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; "		\
		"erase "CONFIG_UBOOT1_ENV_ADDR" +80000; "		\
		"cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; "	\
		"protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; "		\
		"cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; "	\
		"if test $? -ne 0; then "				\
			"echo PROGRAM FAILED; "				\
		"else; "						\
			"echo PROGRAM SUCCEEDED; "			\
		"fi; "							\
	"else; "							\
		"echo DOWNLOAD FAILED; "				\
	"fi;"

#define CONFIG_PROG_UBOOT2						\
	"$download_cmd $loadaddr $ubootfile; "				\
	"if test $? -eq 0; then "					\
		"protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; "		\
		"erase "CONFIG_UBOOT2_ENV_ADDR" +80000; "		\
		"cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; "	\
		"protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; "		\
		"cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; "	\
		"if test $? -ne 0; then "				\
			"echo PROGRAM FAILED; "				\
		"else; "						\
			"echo PROGRAM SUCCEEDED; "			\
		"fi; "							\
	"else; "							\
		"echo DOWNLOAD FAILED; "				\
	"fi;"

#define CONFIG_BOOT_OS_NET						\
	"$download_cmd $osaddr $osfile; "				\
	"if test $? -eq 0; then "					\
		"if test -n $fdtaddr; then "				\
			"$download_cmd $fdtaddr $fdtfile; "		\
			"if test $? -eq 0; then "			\
				"bootm $osaddr - $fdtaddr; "		\
			"else; "					\
				"echo FDT DOWNLOAD FAILED; "		\
			"fi; "						\
		"else; "						\
			"bootm $osaddr; "				\
		"fi; "							\
	"else; "							\
		"echo OS DOWNLOAD FAILED; "				\
	"fi;"

#define CONFIG_PROG_OS1							\
	"$download_cmd $osaddr $osfile; "				\
	"if test $? -eq 0; then "					\
		"erase "CONFIG_OS1_ENV_ADDR" +$filesize; "		\
		"cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "	\
		"cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "	\
		"if test $? -ne 0; then "				\
			"echo OS PROGRAM FAILED; "			\
		"else; "						\
			"echo OS PROGRAM SUCCEEDED; "			\
		"fi; "							\
	"else; "							\
		"echo OS DOWNLOAD FAILED; "				\
	"fi;"

#define CONFIG_PROG_OS2							\
	"$download_cmd $osaddr $osfile; "				\
	"if test $? -eq 0; then "					\
		"erase "CONFIG_OS2_ENV_ADDR" +$filesize; "		\
		"cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "	\
		"cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "	\
		"if test $? -ne 0; then "				\
			"echo OS PROGRAM FAILED; "			\
		"else; "						\
			"echo OS PROGRAM SUCCEEDED; "			\
		"fi; "							\
	"else; "							\
		"echo OS DOWNLOAD FAILED; "				\
	"fi;"

#define CONFIG_PROG_FDT1						\
	"$download_cmd $fdtaddr $fdtfile; "				\
	"if test $? -eq 0; then "					\
		"erase "CONFIG_FDT1_ENV_ADDR" +$filesize;"		\
		"cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "	\
		"cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "	\
		"if test $? -ne 0; then "				\
			"echo FDT PROGRAM FAILED; "			\
		"else; "						\
			"echo FDT PROGRAM SUCCEEDED; "			\
		"fi; "							\
	"else; "							\
		"echo FDT DOWNLOAD FAILED; "				\
	"fi;"

#define CONFIG_PROG_FDT2						\
	"$download_cmd $fdtaddr $fdtfile; "				\
	"if test $? -eq 0; then "					\
		"erase "CONFIG_FDT2_ENV_ADDR" +$filesize;"		\
		"cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "	\
		"cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "	\
		"if test $? -ne 0; then "				\
			"echo FDT PROGRAM FAILED; "			\
		"else; "						\
			"echo FDT PROGRAM SUCCEEDED; "			\
		"fi; "							\
	"else; "							\
		"echo FDT DOWNLOAD FAILED; "				\
	"fi;"

#define	CONFIG_EXTRA_ENV_SETTINGS					\
	"autoload=yes\0"						\
	"download_cmd=tftp\0"						\
	"console_args=console=ttyS0,115200\0"				\
	"root_args=root=/dev/nfs rw\0"					\
	"misc_args=ip=on\0"						\
	"set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
	"bootfile=/home/user/file\0"					\
	"osfile=/home/user/uImage-XPedite5200\0"			\
	"fdtfile=/home/user/xpedite5200.dtb\0"				\
	"ubootfile=/home/user/u-boot.bin\0"				\
	"fdtaddr=c00000\0"						\
	"osaddr=0x1000000\0"						\
	"loadaddr=0x1000000\0"						\
	"prog_uboot1="CONFIG_PROG_UBOOT1"\0"				\
	"prog_uboot2="CONFIG_PROG_UBOOT2"\0"				\
	"prog_os1="CONFIG_PROG_OS1"\0"					\
	"prog_os2="CONFIG_PROG_OS2"\0"					\
	"prog_fdt1="CONFIG_PROG_FDT1"\0"				\
	"prog_fdt2="CONFIG_PROG_FDT2"\0"				\
	"bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0"		\
	"bootcmd_flash1=run set_bootargs; "				\
		"bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\
	"bootcmd_flash2=run set_bootargs; "				\
		"bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\
	"bootcmd=run bootcmd_flash1\0"
#endif	/* __CONFIG_H */
Commit	Line	Data
1f03cbfa PT	1	/*
	2	* Copyright 2008 Extreme Engineering Solutions, Inc.
	3	* Copyright 2004-2008 Freescale Semiconductor, Inc.
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	/*
	25	* xpedite5200 board configuration file
	26	*/
	27	#ifndef __CONFIG_H
	28	#define __CONFIG_H
	29
	30	/*
	31	* High Level Configuration Options
	32	*/
	33	#define CONFIG_BOOKE 1 /* BOOKE */
	34	#define CONFIG_E500 1 /* BOOKE e500 family */
	35	#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */
	36	#define CONFIG_MPC8548 1
	37	#define CONFIG_XPEDITE5200 1
	38	#define CONFIG_SYS_BOARD_NAME "XPedite5200"
	39	#define CONFIG_BOARD_EARLY_INIT_R /* Call board_pre_init */
	40	#define CONFIG_RELOC_FIXUP_WORKS /* Fully relocate to SDRAM */
	41
	42	#define CONFIG_PCI 1 /* Enable PCI/PCIE */
	43	#define CONFIG_PCI_PNP 1 /* do pci plug-and-play */
	44	#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
	45	#define CONFIG_PCI1 1 /* PCI controller 1 */
	46	#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
	47	#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
	48	#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
	49
	50	/*
	51	* DDR config
	52	*/
	53	#define CONFIG_FSL_DDR2
	54	#undef CONFIG_FSL_DDR_INTERACTIVE
	55	#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
	56	#define CONFIG_DDR_SPD
	57	#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
	58	#define SPD_EEPROM_ADDRESS 0x54
	59	#define CONFIG_NUM_DDR_CONTROLLERS 1
	60	#define CONFIG_DIMM_SLOTS_PER_CTLR 1
	61	#define CONFIG_CHIP_SELECTS_PER_CTRL 2
	62	#define CONFIG_DDR_ECC
	63	#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
	64	#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
65	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
66	#define CONFIG_VERY_BIG_RAM
67
68	#define CONFIG_SYS_CLK_FREQ 66666666
69
70	/*
71	* These can be toggled for performance analysis, otherwise use default.
72	*/
73	#define CONFIG_L2_CACHE /* toggle L2 cache */
74	#define CONFIG_BTB /* toggle branch predition */
75	#define CONFIG_ENABLE_36BIT_PHYS 1
76
77	/*
78	* Base addresses -- Note these are effective addresses where the
79	* actual resources get mapped (not physical addresses)
80	*/
81	#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
82	#define CONFIG_SYS_CCSRBAR 0xef000000 /* relocated CCSRBAR */
83	#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
84	#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
85	#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR + 0x8000)
86
87	/*
88	* Diagnostics
89	*/
90	#define CONFIG_SYS_ALT_MEMTEST
91	#define CONFIG_SYS_MEMTEST_START 0x10000000
92	#define CONFIG_SYS_MEMTEST_END 0x20000000
93
94	/*
95	* Memory map
96	* 0x0000_0000 0x7fff_ffff DDR 2G Cacheable
97	* 0x8000_0000 0xbfff_ffff PCI1 Mem 1G non-cacheable
98	* 0xe000_0000 0xe7ff_ffff SRAM/SSRAM/L1 Cache 128M non-cacheable
99	* 0xe800_0000 0xe87f_ffff PCI1 IO 8M non-cacheable
100	* 0xef00_0000 0xef0f_ffff CCSR/IMMR 1M non-cacheable
101	* 0xef80_0000 0xef8f_ffff NAND Flash 1M non-cacheable
102	* 0xf800_0000 0xfbff_ffff NOR Flash 2 64M non-cacheable
103	* 0xfc00_0000 0xffff_ffff NOR Flash 1 64M non-cacheable
104	*/
105
106	#define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_4 \| LCRR_EADC_3)
107
108	/*
109	* NAND flash configuration
110	*/
111	#define CONFIG_SYS_NAND_BASE 0xef800000
112	#define CONFIG_SYS_NAND_BASE2 0xef840000 /* Unused at this time */
113	#define CONFIG_SYS_MAX_NAND_DEVICE 1
114	#define CONFIG_NAND_ACTL
115	#define CONFIG_SYS_NAND_ACTL_CLE (1 << 3) /* ADDR3 is CLE */
116	#define CONFIG_SYS_NAND_ACTL_ALE (1 << 4) /* ADDR4 is ALE */
117	#define CONFIG_SYS_NAND_ACTL_NCE (0) /* NCE not controlled by ADDR */
118	#define CONFIG_SYS_NAND_ACTL_DELAY 25
119
120	/*
121	* NOR flash configuration
122	*/
123	#define CONFIG_SYS_FLASH_BASE 0xfc000000
124	#define CONFIG_SYS_FLASH_BASE2 0xf8000000
125	#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2}
126	#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
127	#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
128	#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
129	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
130	#define CONFIG_FLASH_CFI_DRIVER
131	#define CONFIG_SYS_FLASH_CFI
5ff82100	132	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
1f03cbfa PT	133	#define CONFIG_SYS_FLASH_AUTOPROTECT_LIST { {0xfff40000, 0xc0000}, \
	134	{0xfbf40000, 0xc0000} }
	135	#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
	136
	137	/*
	138	* Chip select configuration
	139	*/
	140	/* NOR Flash 0 on CS0 */
	141	#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \| \
	142	BR_PS_16 \| \
	143	BR_V)
	144	#define CONFIG_SYS_OR0_PRELIM (OR_AM_64MB \| \
	145	OR_GPCM_ACS_DIV4 \| \
	146	OR_GPCM_SCY_8)
	147
	148	/* NOR Flash 1 on CS1 */
	149	#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_FLASH_BASE2 \| \
	150	BR_PS_16 \| \
	151	BR_V)
	152	#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM
	153
	154	/* NAND flash on CS2 */
	155	#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_NAND_BASE \| \
	156	BR_PS_8 \| \
	157	BR_V)
	158
	159	/* NAND flash on CS2 */
	160	#define CONFIG_SYS_OR2_PRELIM (OR_AM_256KB \| \
	161	OR_GPCM_BCTLD \| \
	162	OR_GPCM_CSNT \| \
	163	OR_GPCM_ACS_DIV4 \| \
	164	OR_GPCM_SCY_4 \| \
	165	OR_GPCM_TRLX \| \
	166	OR_GPCM_EHTR)
	167
	168	/* NAND flash on CS3 */
	169	#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_NAND_BASE2 \| \
	170	BR_PS_8 \| \
	171	BR_V)
	172	#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_OR2_PRELIM
	173
	174	/*
	175	* Use L1 as initial stack
	176	*/
	177	#define CONFIG_SYS_INIT_RAM_LOCK 1
	178	#define CONFIG_SYS_INIT_RAM_ADDR 0xe0000000
	179	#define CONFIG_SYS_INIT_RAM_END 0x4000
	180
	181	#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
	182	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
	183	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
	184
	185	#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */
	186	#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */
	187
	188	/*
	189	* Serial Port
	190	*/
	191	#define CONFIG_CONS_INDEX 1
	192	#define CONFIG_SYS_NS16550
	193	#define CONFIG_SYS_NS16550_SERIAL
	194	#define CONFIG_SYS_NS16550_REG_SIZE 1
	195	#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
	196	#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
197	#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
198	#define CONFIG_SYS_BAUDRATE_TABLE \
199	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
200	#define CONFIG_BAUDRATE 115200
201	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
202	#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
203
204	/*
205	* Use the HUSH parser
206	*/
207	#define CONFIG_SYS_HUSH_PARSER
208	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
209
210	/*
211	* Pass open firmware flat tree
212	*/
213	#define CONFIG_OF_LIBFDT 1
214	#define CONFIG_OF_BOARD_SETUP 1
215	#define CONFIG_OF_STDOUT_VIA_ALIAS 1
216
217	#define CONFIG_SYS_64BIT_VSPRINTF 1
218	#define CONFIG_SYS_64BIT_STRTOUL 1
219
220	/*
221	* I2C
222	*/
223	#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
224	#define CONFIG_HARD_I2C /* I2C with hardware support */
225	#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
226	#define CONFIG_SYS_I2C_SLAVE 0x7F
227	#define CONFIG_SYS_I2C_OFFSET 0x3000
228	#define CONFIG_SYS_I2C2_OFFSET 0x3100
229	#define CONFIG_I2C_MULTI_BUS
1f03cbfa PT	230
	231	/* I2C EEPROM */
	232	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
	233	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	234	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 byte pages */
	235	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* take up to 10 msec */
	236
	237	/* I2C RTC */
	238	#define CONFIG_RTC_M41T11 1
	239	#define CONFIG_SYS_I2C_RTC_ADDR 0x68
	240	#define CONFIG_SYS_M41T11_BASE_YEAR 2000
	241
	242	/* GPIO */
	243	#define CONFIG_PCA953X
	244	#define CONFIG_SYS_I2C_PCA953X_ADDR0 0x18
	245	#define CONFIG_SYS_I2C_PCA953X_ADDR1 0x19
	246	#define CONFIG_SYS_I2C_PCA953X_ADDR CONFIG_SYS_I2C_PCA953X_ADDR0
	247
	248	/* PCA957 @ 0x18 */
	249	#define CONFIG_SYS_PCA953X_BRD_CFG0 0x01
	250	#define CONFIG_SYS_PCA953X_BRD_CFG1 0x02
	251	#define CONFIG_SYS_PCA953X_BRD_CFG2 0x04
	252	#define CONFIG_SYS_PCA953X_XMC_ROOT0 0x08
	253	#define CONFIG_SYS_PCA953X_FLASH_PASS_CS 0x10
	254	#define CONFIG_SYS_PCA953X_FLASH_WP 0x20
	255	#define CONFIG_SYS_PCA953X_MONARCH 0x40
	256	#define CONFIG_SYS_PCA953X_EREADY 0x80
	257
	258	/* PCA957 @ 0x19 */
	259	#define CONFIG_SYS_PCA953X_P14_IO0 0x01
	260	#define CONFIG_SYS_PCA953X_P14_IO1 0x02
	261	#define CONFIG_SYS_PCA953X_P14_IO2 0x04
	262	#define CONFIG_SYS_PCA953X_P14_IO3 0x08
	263	#define CONFIG_SYS_PCA953X_P14_IO4 0x10
	264	#define CONFIG_SYS_PCA953X_P14_IO5 0x20
	265	#define CONFIG_SYS_PCA953X_P14_IO6 0x40
	266	#define CONFIG_SYS_PCA953X_P14_IO7 0x80
	267
	268	/*
	269	* General PCI
	270	* Memory space is mapped 1-1, but I/O space must start from 0.
	271	*/
	272	#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
	273	#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
	274	#define CONFIG_SYS_PCI1_MEM_SIZE 0x40000000 /* 1G */
	275	#define CONFIG_SYS_PCI1_IO_BASE 0x00000000
	276	#define CONFIG_SYS_PCI1_IO_PHYS 0xe8000000
	277	#define CONFIG_SYS_PCI1_IO_SIZE 0x00800000 /* 1M */
	278
	279	/*
	280	* Networking options
	281	*/
	282	#define CONFIG_TSEC_ENET /* tsec ethernet support */
	283	#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
	284	#define CONFIG_NET_MULTI 1
	285	#define CONFIG_MII 1 /* MII PHY management */
	286	#define CONFIG_ETHPRIME "eTSEC1"
	287
	288	#define CONFIG_TSEC1 1
	289	#define CONFIG_TSEC1_NAME "eTSEC1"
	290	#define TSEC1_FLAGS TSEC_GIGABIT
	291	#define TSEC1_PHY_ADDR 1
	292	#define TSEC1_PHYIDX 0
	293	#define CONFIG_HAS_ETH0
294
295	#define CONFIG_TSEC2 1
296	#define CONFIG_TSEC2_NAME "eTSEC2"
297	#define TSEC2_FLAGS TSEC_GIGABIT
298	#define TSEC2_PHY_ADDR 2
299	#define TSEC2_PHYIDX 0
300	#define CONFIG_HAS_ETH1
301
302	#define CONFIG_TSEC3 1
303	#define CONFIG_TSEC3_NAME "eTSEC3"
304	#define TSEC3_FLAGS TSEC_GIGABIT
305	#define TSEC3_PHY_ADDR 3
306	#define TSEC3_PHYIDX 0
307	#define CONFIG_HAS_ETH2
308
309	#define CONFIG_TSEC4 1
310	#define CONFIG_TSEC4_NAME "eTSEC4"
311	#define TSEC4_FLAGS TSEC_GIGABIT
312	#define TSEC4_PHY_ADDR 4
313	#define TSEC4_PHYIDX 0
314	#define CONFIG_HAS_ETH3
315
316	/*
317	* BOOTP options
318	*/
319	#define CONFIG_BOOTP_BOOTFILESIZE
320	#define CONFIG_BOOTP_BOOTPATH
321	#define CONFIG_BOOTP_GATEWAY
322
323	/*
324	* Command configuration.
325	*/
326	#include <config_cmd_default.h>
327
328	#define CONFIG_CMD_ASKENV
329	#define CONFIG_CMD_DATE
330	#define CONFIG_CMD_DHCP
331	#define CONFIG_CMD_EEPROM
332	#define CONFIG_CMD_ELF
bdab39d3	333	#define CONFIG_CMD_SAVEENV
1f03cbfa PT	334	#define CONFIG_CMD_FLASH
	335	#define CONFIG_CMD_I2C
	336	#define CONFIG_CMD_JFFS2
	337	#define CONFIG_CMD_MII
	338	#define CONFIG_CMD_NAND
	339	#define CONFIG_CMD_NET
	340	#define CONFIG_CMD_PCA953X
	341	#define CONFIG_CMD_PCA953X_INFO
	342	#define CONFIG_CMD_PCI
	343	#define CONFIG_CMD_PING
	344	#define CONFIG_CMD_SNTP
	345
	346	/*
	347	* Miscellaneous configurable options
	348	*/
	349	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	350	#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
	351	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
	352	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	353	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	354	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	355	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
	356	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
	357	#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
	358	#define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */
	359	#define CONFIG_BOOTDELAY 3 /* -1 disables auto-boot */
	360	#define CONFIG_PANIC_HANG /* do not reset board on panic */
	361	#define CONFIG_PREBOOT /* enable preboot variable */
	362	#define CONFIG_FIT 1
	363	#define CONFIG_FIT_VERBOSE 1
	364	#define CONFIG_INTEGRITY /* support booting INTEGRITY OS */
	365	#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
	366
	367	/*
	368	* For booting Linux, the board info and command line data
	369	* have to be in the first 16 MB of memory, since this is
	370	* the maximum mapped by the Linux kernel during initialization.
	371	*/
	372	#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/
39121c08	373	#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */
1f03cbfa PT	374
	375	/*
	376	* Boot Flags
	377	*/
	378	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	379	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	380
	381	/*
	382	* Environment Configuration
	383	*/
	384	#define CONFIG_ENV_IS_IN_FLASH 1
	385	#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128k (one sector) for env */
	386	#define CONFIG_ENV_SIZE 0x8000
	387	#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - (256 * 1024))
	388
	389	/*
	390	* Flash memory map:
	391	* fff80000 - ffffffff Pri U-Boot (512 KB)
	392	* fff40000 - fff7ffff Pri U-Boot Environment (256 KB)
	393	* fff00000 - fff3ffff Pri FDT (256KB)
	394	* fef00000 - ffefffff Pri OS image (16MB)
	395	* fc000000 - feefffff Pri OS Use/Filesystem (47MB)
	396	*
	397	* fbf80000 - fbffffff Sec U-Boot (512 KB)
	398	* fbf40000 - fbf7ffff Sec U-Boot Environment (256 KB)
	399	* fbf00000 - fbf3ffff Sec FDT (256KB)
	400	* faf00000 - fbefffff Sec OS image (16MB)
	401	* f8000000 - faefffff Sec OS Use/Filesystem (47MB)
	402	*/
	403	#define CONFIG_UBOOT1_ENV_ADDR MK_STR(0xfff80000)
	404	#define CONFIG_UBOOT2_ENV_ADDR MK_STR(0xfbf80000)
	405	#define CONFIG_FDT1_ENV_ADDR MK_STR(0xfff00000)
	406	#define CONFIG_FDT2_ENV_ADDR MK_STR(0xfbf00000)
	407	#define CONFIG_OS1_ENV_ADDR MK_STR(0xfef00000)
	408	#define CONFIG_OS2_ENV_ADDR MK_STR(0xfaf00000)
	409
	410	#define CONFIG_PROG_UBOOT1 \
	411	"$download_cmd $loadaddr $ubootfile; " \
	412	"if test $? -eq 0; then " \
	413	"protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; " \
	414	"erase "CONFIG_UBOOT1_ENV_ADDR" +80000; " \
	415	"cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; " \
	416	"protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; " \
	417	"cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; " \
	418	"if test $? -ne 0; then " \
	419	"echo PROGRAM FAILED; " \
	420	"else; " \
	421	"echo PROGRAM SUCCEEDED; " \
	422	"fi; " \
	423	"else; " \
	424	"echo DOWNLOAD FAILED; " \
	425	"fi;"
	426
	427	#define CONFIG_PROG_UBOOT2 \
	428	"$download_cmd $loadaddr $ubootfile; " \
	429	"if test $? -eq 0; then " \
	430	"protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; " \
	431	"erase "CONFIG_UBOOT2_ENV_ADDR" +80000; " \
	432	"cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; " \
	433	"protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; " \
	434	"cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; " \
	435	"if test $? -ne 0; then " \
	436	"echo PROGRAM FAILED; " \
	437	"else; " \
438	"echo PROGRAM SUCCEEDED; " \
439	"fi; " \
440	"else; " \
441	"echo DOWNLOAD FAILED; " \
442	"fi;"
443
444	#define CONFIG_BOOT_OS_NET \
445	"$download_cmd $osaddr $osfile; " \
446	"if test $? -eq 0; then " \
447	"if test -n $fdtaddr; then " \
448	"$download_cmd $fdtaddr $fdtfile; " \
449	"if test $? -eq 0; then " \
450	"bootm $osaddr - $fdtaddr; " \
451	"else; " \
452	"echo FDT DOWNLOAD FAILED; " \
453	"fi; " \
454	"else; " \
455	"bootm $osaddr; " \
456	"fi; " \
457	"else; " \
458	"echo OS DOWNLOAD FAILED; " \
459	"fi;"
460
461	#define CONFIG_PROG_OS1 \
462	"$download_cmd $osaddr $osfile; " \
463	"if test $? -eq 0; then " \
464	"erase "CONFIG_OS1_ENV_ADDR" +$filesize; " \
465	"cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; " \
466	"cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; " \
467	"if test $? -ne 0; then " \
468	"echo OS PROGRAM FAILED; " \
469	"else; " \
470	"echo OS PROGRAM SUCCEEDED; " \
471	"fi; " \
472	"else; " \
473	"echo OS DOWNLOAD FAILED; " \
474	"fi;"
475
476	#define CONFIG_PROG_OS2 \
477	"$download_cmd $osaddr $osfile; " \
478	"if test $? -eq 0; then " \
479	"erase "CONFIG_OS2_ENV_ADDR" +$filesize; " \
480	"cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; " \
481	"cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; " \
482	"if test $? -ne 0; then " \
483	"echo OS PROGRAM FAILED; " \
484	"else; " \
485	"echo OS PROGRAM SUCCEEDED; " \
486	"fi; " \
487	"else; " \
488	"echo OS DOWNLOAD FAILED; " \
489	"fi;"
490
491	#define CONFIG_PROG_FDT1 \
492	"$download_cmd $fdtaddr $fdtfile; " \
493	"if test $? -eq 0; then " \
494	"erase "CONFIG_FDT1_ENV_ADDR" +$filesize;" \
495	"cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; " \
496	"cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; " \
497	"if test $? -ne 0; then " \
498	"echo FDT PROGRAM FAILED; " \
499	"else; " \
500	"echo FDT PROGRAM SUCCEEDED; " \
501	"fi; " \
502	"else; " \
503	"echo FDT DOWNLOAD FAILED; " \
504	"fi;"
505
506	#define CONFIG_PROG_FDT2 \
507	"$download_cmd $fdtaddr $fdtfile; " \
508	"if test $? -eq 0; then " \
509	"erase "CONFIG_FDT2_ENV_ADDR" +$filesize;" \
510	"cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; " \
511	"cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; " \
512	"if test $? -ne 0; then " \
513	"echo FDT PROGRAM FAILED; " \
514	"else; " \
515	"echo FDT PROGRAM SUCCEEDED; " \
516	"fi; " \
517	"else; " \
518	"echo FDT DOWNLOAD FAILED; " \
519	"fi;"
520
521	#define CONFIG_EXTRA_ENV_SETTINGS \
522	"autoload=yes\0" \
523	"download_cmd=tftp\0" \
524	"console_args=console=ttyS0,115200\0" \
525	"root_args=root=/dev/nfs rw\0" \
526	"misc_args=ip=on\0" \
527	"set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
528	"bootfile=/home/user/file\0" \
529	"osfile=/home/user/uImage-XPedite5200\0" \
530	"fdtfile=/home/user/xpedite5200.dtb\0" \
531	"ubootfile=/home/user/u-boot.bin\0" \
532	"fdtaddr=c00000\0" \
533	"osaddr=0x1000000\0" \
534	"loadaddr=0x1000000\0" \
535	"prog_uboot1="CONFIG_PROG_UBOOT1"\0" \
536	"prog_uboot2="CONFIG_PROG_UBOOT2"\0" \
537	"prog_os1="CONFIG_PROG_OS1"\0" \
538	"prog_os2="CONFIG_PROG_OS2"\0" \
539	"prog_fdt1="CONFIG_PROG_FDT1"\0" \
540	"prog_fdt2="CONFIG_PROG_FDT2"\0" \
541	"bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0" \
542	"bootcmd_flash1=run set_bootargs; " \
543	"bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\
544	"bootcmd_flash2=run set_bootargs; " \
545	"bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\
546	"bootcmd=run bootcmd_flash1\0"
547	#endif /* __CONFIG_H */