[u-boot.git] / include / configs / SBx81LIFKW.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * (C) Copyright 2016 Allied Telesis <www.alliedtelesis.co.nz>
 */

#ifndef _CONFIG_SBX81LIFKW_H
#define _CONFIG_SBX81LIFKW_H

/*
 * High Level Configuration Options (easy to change)
 */
#define CONFIG_FEROCEON_88FR131	1	/* CPU Core subversion */
#define CONFIG_KW88F6281	1	/* SOC Name */
#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
#define CONFIG_SYS_KWD_CONFIG	$(CONFIG_BOARDDIR)/kwbimage.cfg

/* additions for new ARM relocation support */
#define CONFIG_SYS_SDRAM_BASE	0x00000000

#define CONFIG_MD5	/* get_random_hex on krikwood needs MD5 support */
#define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
#define CONFIG_KIRKWOOD_PCIE_INIT	/* Enable PCIE Port0 */
#define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V */
#define CONFIG_KIRKWOOD_GPIO	1

/*
 * NS16550 Configuration
 */
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
#define CONFIG_SYS_NS16550_COM1		KW_UART0_BASE

/*
 * Serial Port configuration
 * The following definitions let you select what serial you want to use
 * for your console driver.
 */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs */
#define CONFIG_INITRD_TAG	1	/* enable INITRD tag */
#define CONFIG_SETUP_MEMORY_TAGS 1	/* enable memory tag */

#define MTDPARTS_DEFAULT "mtdparts=spi0.0:768K(boot)ro,256K(boot-env),14M(user),1M(errlog)"
#define MTDPARTS_MTDOOPS "errlog"
#define CONFIG_DOS_PARTITION

/*
 *  Environment variables configurations
 */

/*
 * U-Boot bootcode configuration
 */

#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for monitor */
#define CONFIG_SYS_MALLOC_LEN		  (4 << 20)	/* Reserve 4.0 MB for malloc */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Mem map for Linux*/

/* size in bytes reserved for initial data */

#include <asm/arch/config.h>
/* There is no PHY directly connected so don't ask it for link status */
#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN

/*
 * Other required minimal configurations
 */
#define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */

/*
 * Ethernet Driver configuration
 */
#ifdef CONFIG_CMD_NET
#define CONFIG_NETCONSOLE	/* include NetConsole support */
#define CONFIG_NET_MULTI	/* specify more that one ports available */
#define CONFIG_MVGBE	/* Enable kirkwood Gbe Controller Driver */
#define CONFIG_MVGBE_PORTS	{1, 0}	/* enable a single port */
#define CONFIG_PHY_BASE_ADR	0x01
#define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
#endif /* CONFIG_CMD_NET */

#define CONFIG_SYS_LOAD_ADDR  0x1000000      /* default location for tftp and bootm */

#endif /* _CONFIG_SBX81LIFKW_H */
Commit	Line	Data
87a62bce CP	1	/* SPDX-License-Identifier: GPL-2.0+ */
	2	/*
	3	* (C) Copyright 2016 Allied Telesis <www.alliedtelesis.co.nz>
	4	*/
	5
	6	#ifndef _CONFIG_SBX81LIFKW_H
	7	#define _CONFIG_SBX81LIFKW_H
	8
	9	/*
	10	* High Level Configuration Options (easy to change)
	11	*/
	12	#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
	13	#define CONFIG_KW88F6281 1 /* SOC Name */
	14	#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
	15	#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg
87a62bce CP	16
	17	/* additions for new ARM relocation support */
	18	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	19
	20	#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */
	21	#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */
	22	#define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 */
	23	#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */
	24	#define CONFIG_KIRKWOOD_GPIO 1
	25
87a62bce CP	26	/*
	27	* NS16550 Configuration
	28	*/
	29	#define CONFIG_SYS_NS16550
	30	#define CONFIG_SYS_NS16550_SERIAL
	31	#define CONFIG_SYS_NS16550_REG_SIZE (-4)
	32	#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK
	33	#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE
	34
	35	/*
	36	* Serial Port configuration
	37	* The following definitions let you select what serial you want to use
	38	* for your console driver.
	39	*/
	40
87a62bce CP	41	/*
	42	* For booting Linux, the board info and command line data
	43	* have to be in the first 8 MB of memory, since this is
	44	* the maximum mapped by the Linux kernel during initialization.
	45	*/
	46	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	47	#define CONFIG_INITRD_TAG 1 /* enable INITRD tag */
	48	#define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */
	49
	50	#define MTDPARTS_DEFAULT "mtdparts=spi0.0:768K(boot)ro,256K(boot-env),14M(user),1M(errlog)"
	51	#define MTDPARTS_MTDOOPS "errlog"
	52	#define CONFIG_DOS_PARTITION
	53
	54	/*
	55	* Environment variables configurations
	56	*/
87a62bce CP	57
	58	/*
	59	* U-Boot bootcode configuration
	60	*/
	61
	62	#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for monitor */
	63	#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* Reserve 4.0 MB for malloc */
	64
	65	/*
	66	* For booting Linux, the board info and command line data
	67	* have to be in the first 8 MB of memory, since this is
	68	* the maximum mapped by the Linux kernel during initialization.
	69	*/
	70	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Mem map for Linux*/
	71
	72	/* size in bytes reserved for initial data */
	73
	74	#include <asm/arch/config.h>
	75	/* There is no PHY directly connected so don't ask it for link status */
	76	#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
	77
	78	/*
	79	* Other required minimal configurations
	80	*/
87a62bce CP	81	#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
	82
	83	/*
	84	* Ethernet Driver configuration
	85	*/
	86	#ifdef CONFIG_CMD_NET
	87	#define CONFIG_NETCONSOLE /* include NetConsole support */
	88	#define CONFIG_NET_MULTI /* specify more that one ports available */
87a62bce CP	89	#define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */
	90	#define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */
	91	#define CONFIG_PHY_BASE_ADR 0x01
	92	#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
87a62bce CP	93	#endif /* CONFIG_CMD_NET */
87a62bce CP	94
87a62bce CP	95	#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default location for tftp and bootm */
	96
	97	#endif /* _CONFIG_SBX81LIFKW_H */