[u-boot.git] / include / configs / tcm-bf518.h

/*
 * U-Boot - Configuration file for Bluetechnix TCM-BF518 board
 */

#ifndef __CONFIG_TCM_BF518_H__
#define __CONFIG_TCM_BF518_H__

#include <asm/config-pre.h>

/*
 * Processor Settings
 */
#define CONFIG_BFIN_CPU             bf518-0.0
#define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_PARA

/*
 * Clock Settings
 *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
 *	SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
 */
/* CONFIG_CLKIN_HZ is any value in Hz					*/
#define CONFIG_CLKIN_HZ			25000000
/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN		*/
/*                                                1 = CLKIN / 2		*/
#define CONFIG_CLKIN_HALF		0
/* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass	*/
/*                                                1 = bypass PLL	*/
#define CONFIG_PLL_BYPASS		0
/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL		*/
/* Values can range from 0-63 (where 0 means 64)			*/
#define CONFIG_VCO_MULT			16
/* CCLK_DIV controls the core clock divider				*/
/* Values can be 1, 2, 4, or 8 ONLY					*/
#define CONFIG_CCLK_DIV			1
/* SCLK_DIV controls the system clock divider				*/
/* Values can range from 1-15						*/
#define CONFIG_SCLK_DIV			4

/*
 * Memory Settings
 */
/* This board has a 32meg MT48H16M16 */
#define CONFIG_MEM_ADD_WDTH	9
#define CONFIG_MEM_SIZE		32

#define CONFIG_EBIU_SDRRC_VAL	0x3f8
#define CONFIG_EBIU_SDGCTL_VAL	0x9111cd

#define CONFIG_EBIU_AMGCTL_VAL	(AMBEN_ALL)
#define CONFIG_EBIU_AMBCTL0_VAL	(B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3)
#define CONFIG_EBIU_AMBCTL1_VAL	(B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3)

#define CONFIG_SYS_MONITOR_LEN	(512 * 1024)
#define CONFIG_SYS_MALLOC_LEN	(384 * 1024)

/*
 * Network Settings
 */
#if !defined(__ADSPBF512__) && !defined(__ADSPBF514__)
#define ADI_CMDS_NETWORK	1
#define CONFIG_BFIN_MAC
#define CONFIG_NETCONSOLE	1
#endif
#define CONFIG_HOSTNAME		tcm-bf518

/*
 * Flash Settings
 */
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_BASE		0x20000000
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_PROTECTION
#define CONFIG_SYS_MAX_FLASH_BANKS	1
#define CONFIG_SYS_MAX_FLASH_SECT	19

/*
 * SPI Settings
 */
#define CONFIG_BFIN_SPI
#define CONFIG_ENV_SPI_MAX_HZ	30000000
#define CONFIG_SF_DEFAULT_SPEED	30000000

/*
 * Env Storage Settings
 */
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_OFFSET	0x8000
#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
#define CONFIG_ENV_SIZE		0x2000
#define CONFIG_ENV_SECT_SIZE	0x8000
#define CONFIG_ENV_IS_EMBEDDED_IN_LDR

/*
 * I2C Settings
 */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_ADI

/*
 * Misc Settings
 */
#define CONFIG_BAUDRATE		115200
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE	0
#define CONFIG_BOOTCOMMAND	"run flashboot"
#define FLASHBOOT_ENV_SETTINGS	"flashboot=bootm 0x20040000\0"

/*
 * Pull in common ADI header for remaining command/environment setup
 */
#include <configs/bfin_adi_common.h>

#endif
Commit	Line	Data
2aeda2d0	1	/*
a187559e	2	* U-Boot - Configuration file for Bluetechnix TCM-BF518 board
2aeda2d0 HK	3	*/
	4
	5	#ifndef __CONFIG_TCM_BF518_H__
	6	#define __CONFIG_TCM_BF518_H__
	7
	8	#include <asm/config-pre.h>
	9
2aeda2d0 HK	10	/*
	11	* Processor Settings
	12	*/
fbcf8e8c	13	#define CONFIG_BFIN_CPU bf518-0.0
2aeda2d0 HK	14	#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA
2aeda2d0 HK	15
2aeda2d0 HK	16	/*
	17	* Clock Settings
	18	* CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
	19	* SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
	20	*/
	21	/* CONFIG_CLKIN_HZ is any value in Hz */
	22	#define CONFIG_CLKIN_HZ 25000000
	23	/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
	24	/* 1 = CLKIN / 2 */
	25	#define CONFIG_CLKIN_HALF 0
	26	/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
	27	/* 1 = bypass PLL */
	28	#define CONFIG_PLL_BYPASS 0
	29	/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
	30	/* Values can range from 0-63 (where 0 means 64) */
	31	#define CONFIG_VCO_MULT 16
	32	/* CCLK_DIV controls the core clock divider */
	33	/* Values can be 1, 2, 4, or 8 ONLY */
	34	#define CONFIG_CCLK_DIV 1
	35	/* SCLK_DIV controls the system clock divider */
	36	/* Values can range from 1-15 */
	37	#define CONFIG_SCLK_DIV 4
	38
2aeda2d0 HK	39	/*
	40	* Memory Settings
	41	*/
	42	/* This board has a 32meg MT48H16M16 */
	43	#define CONFIG_MEM_ADD_WDTH 9
	44	#define CONFIG_MEM_SIZE 32
	45
	46	#define CONFIG_EBIU_SDRRC_VAL 0x3f8
	47	#define CONFIG_EBIU_SDGCTL_VAL 0x9111cd
	48
	49	#define CONFIG_EBIU_AMGCTL_VAL (AMBEN_ALL)
	50	#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 \| B1RAT_11 \| B1HT_2 \| B1ST_3 \| B0WAT_7 \| B0RAT_11 \| B0HT_2 \| B0ST_3)
	51	#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 \| B3RAT_11 \| B3HT_2 \| B3ST_3 \| B2WAT_7 \| B2RAT_11 \| B2HT_2 \| B2ST_3)
	52
	53	#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
	54	#define CONFIG_SYS_MALLOC_LEN (384 * 1024)
	55
2aeda2d0 HK	56	/*
	57	* Network Settings
	58	*/
	59	#if !defined(__ADSPBF512__) && !defined(__ADSPBF514__)
	60	#define ADI_CMDS_NETWORK 1
	61	#define CONFIG_BFIN_MAC
	62	#define CONFIG_NETCONSOLE 1
2aeda2d0 HK	63	#endif
2aeda2d0 HK	64	#define CONFIG_HOSTNAME tcm-bf518
2aeda2d0 HK	65
	66	/*
	67	* Flash Settings
	68	*/
	69	#define CONFIG_FLASH_CFI_DRIVER
	70	#define CONFIG_SYS_FLASH_BASE 0x20000000
	71	#define CONFIG_SYS_FLASH_CFI
	72	#define CONFIG_SYS_FLASH_PROTECTION
	73	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	74	#define CONFIG_SYS_MAX_FLASH_SECT 19
	75
2aeda2d0 HK	76	/*
	77	* SPI Settings
	78	*/
	79	#define CONFIG_BFIN_SPI
	80	#define CONFIG_ENV_SPI_MAX_HZ 30000000
	81	#define CONFIG_SF_DEFAULT_SPEED 30000000
	82
2aeda2d0 HK	83	/*
	84	* Env Storage Settings
	85	*/
	86	#define CONFIG_ENV_IS_IN_FLASH
	87	#define CONFIG_ENV_OFFSET 0x8000
	88	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
	89	#define CONFIG_ENV_SIZE 0x2000
	90	#define CONFIG_ENV_SECT_SIZE 0x8000
	91	#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
	92
2aeda2d0 HK	93	/*
	94	* I2C Settings
	95	*/
c469703b	96	#define CONFIG_SYS_I2C
fea9b69a	97	#define CONFIG_SYS_I2C_ADI
2aeda2d0	98
2aeda2d0 HK	99	/*
	100	* Misc Settings
	101	*/
	102	#define CONFIG_BAUDRATE 115200
2aeda2d0 HK	103	#define CONFIG_RTC_BFIN
	104	#define CONFIG_UART_CONSOLE 0
	105	#define CONFIG_BOOTCOMMAND "run flashboot"
	106	#define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0"
2aeda2d0 HK	107
	108	/*
	109	* Pull in common ADI header for remaining command/environment setup
	110	*/
	111	#include <configs/bfin_adi_common.h>
	112
	113	#endif