]> Git Repo - u-boot.git/blame - include/configs/brppt1.h
Merge git://git.denx.de/u-boot-mpc85xx
[u-boot.git] / include / configs / brppt1.h
CommitLineData
893c04e1 1/*
2290fe06 2 * brtpp1.h
893c04e1
HP
3 *
4 * specific parts for B&R T-Series Motherboard
5 *
4c302b9a 6 * Copyright (C) 2013 Hannes Schmelzer <[email protected]> -
893c04e1
HP
7 * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
8 *
9 * SPDX-License-Identifier: GPL-2.0+
10 */
11
2290fe06
HS
12#ifndef __CONFIG_BRPPT1_H__
13#define __CONFIG_BRPPT1_H__
893c04e1 14
3b804d94 15#include <configs/bur_cfg_common.h>
893c04e1
HP
16#include <configs/bur_am335x_common.h>
17/* ------------------------------------------------------------------------- */
fbd5aeda 18#define CONFIG_AM335X_LCD
d804452b 19#define CONFIG_LCD_ROTATION
99f72472 20#define CONFIG_LCD_DT_SIMPLEFB
fbd5aeda
HP
21#define CONFIG_SYS_WHITE_ON_BLACK
22#define LCD_BPP LCD_COLOR32
23
cf1331f8
HP
24#define CONFIG_HW_WATCHDOG
25#define CONFIG_OMAP_WATCHDOG
d79c138c 26
df770945
HP
27/* Bootcount using the RTC block */
28#define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000
29#define CONFIG_BOOTCOUNT_LIMIT
30#define CONFIG_BOOTCOUNT_AM33XX
3b804d94
HS
31
32/* memory */
33#define CONFIG_SYS_MALLOC_LEN (5 * 1024 * 1024)
34
893c04e1
HP
35/* Clock Defines */
36#define V_OSCK 26000000 /* Clock output from T2 */
37#define V_SCLK (V_OSCK)
38
39#define CONFIG_POWER_TPS65217
40
41/* Support both device trees and ATAGs. */
fbd5aeda 42#define CONFIG_USE_FDT /* use fdt within board code */
893c04e1
HP
43#define CONFIG_CMDLINE_TAG
44#define CONFIG_SETUP_MEMORY_TAGS
45#define CONFIG_INITRD_TAG
893c04e1
HP
46/*#define CONFIG_MACH_TYPE 3589*/
47#define CONFIG_MACH_TYPE 0xFFFFFFFF /* TODO: check with kernel*/
48
49/* MMC/SD IP block */
50#if defined(CONFIG_EMMC_BOOT)
893c04e1 51 #define CONFIG_SUPPORT_EMMC_BOOT
893c04e1
HP
52#endif /* CONFIG_EMMC_BOOT */
53
54/*
55 * When we have SPI or NAND flash we expect to be making use of mtdparts,
56 * both for ease of use in U-Boot and for passing information on to
57 * the Linux kernel.
58 */
59#if defined(CONFIG_SPI_BOOT) || defined(CONFIG_NAND)
60#define CONFIG_MTD_DEVICE /* Required for mtdparts */
61#define CONFIG_CMD_MTDPARTS
62#endif /* CONFIG_SPI_BOOT, ... */
63
893c04e1
HP
64#ifdef CONFIG_SPL_OS_BOOT
65#define CONFIG_SYS_SPL_ARGS_ADDR 0x80F80000
66
67/* RAW SD card / eMMC */
68#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900 /* address 0x120000 */
69#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */
70#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */
71
72/* NAND */
73#ifdef CONFIG_NAND
74#define CONFIG_CMD_SPL_NAND_OFS 0x080000 /* end of u-boot */
75#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x140000
76#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
77#endif /* CONFIG_NAND */
78#endif /* CONFIG_SPL_OS_BOOT */
79
80#ifdef CONFIG_NAND
81#define CONFIG_SPL_NAND_AM33XX_BCH /* OMAP4 and later ELM support */
893c04e1
HP
82#define CONFIG_SPL_NAND_BASE
83#define CONFIG_SPL_NAND_DRIVERS
84#define CONFIG_SPL_NAND_ECC
85#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
86#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
87#endif /* CONFIG_NAND */
88
662a4765
HP
89/* Always 64 KiB env size */
90#define CONFIG_ENV_SIZE (64 << 10)
893c04e1
HP
91
92#ifdef CONFIG_NAND
93#define NANDARGS \
94 "mtdids=" MTDIDS_DEFAULT "\0" \
95 "mtdparts=" MTDPARTS_DEFAULT "\0" \
96 "nandargs=setenv bootargs console=${console} " \
97 "${optargs} " \
d804452b 98 "${optargs_rot} " \
d79c138c
HP
99 "root=mtd6 " \
100 "rootfstype=jffs2\0" \
101 "kernelsize=0x400000\0" \
102 "nandboot=echo booting from nand ...; " \
893c04e1 103 "run nandargs; " \
d79c138c
HP
104 "nand read ${loadaddr} kernel ${kernelsize}; " \
105 "bootz ${loadaddr} - ${dtbaddr}\0" \
106 "defboot=run nandboot\0" \
107 "bootlimit=1\0" \
99f72472 108 "simplefb=1\0 " \
d79c138c 109 "altbootcmd=run usbscript\0"
893c04e1
HP
110#else
111#define NANDARGS ""
112#endif /* CONFIG_NAND */
113
114#ifdef CONFIG_MMC
115#define MMCARGS \
662a4765
HP
116"dtbdev=mmc\0" \
117"dtbpart=0:1\0" \
d804452b
HP
118"mmcroot0=setenv bootargs ${optargs_rot} ${optargs} console=${console}\0" \
119"mmcroot1=setenv bootargs ${optargs_rot} ${optargs} console=${console} " \
120 "root=/dev/mmcblk0p2 rootfstype=ext4\0" \
662a4765 121"mmcboot0=echo booting Updatesystem from mmc (ext4-fs) ...; " \
99f72472 122 "setenv simplefb 1; " \
662a4765
HP
123 "ext4load mmc 0:1 ${loadaddr} /${kernel}; " \
124 "ext4load mmc 0:1 ${ramaddr} /${ramdisk}; " \
125 "run mmcroot0; bootz ${loadaddr} ${ramaddr} ${dtbaddr};\0" \
126"mmcboot1=echo booting PPT-OS from mmc (ext4-fs) ...; " \
99f72472 127 "setenv simplefb 0; " \
662a4765
HP
128 "ext4load mmc 0:2 ${loadaddr} /boot/${kernel}; " \
129 "run mmcroot1; bootz ${loadaddr} - ${dtbaddr};\0" \
4e2a3415 130"defboot=ext4load mmc 0:2 ${loadaddr} /boot/PPTImage.md5 && run mmcboot1; " \
662a4765 131 "ext4load mmc 0:1 ${dtbaddr} /$dtb && run mmcboot0; " \
5094befd 132 "run ramboot; run usbscript;\0" \
662a4765 133"bootlimit=1\0" \
4e2a3415 134"altbootcmd=run mmcboot0;\0" \
662a4765
HP
135"upduboot=dhcp; " \
136 "tftp ${loadaddr} MLO && mmc write ${loadaddr} 100 100; " \
137 "tftp ${loadaddr} u-boot.img && mmc write ${loadaddr} 300 400;\0"
893c04e1
HP
138#else
139#define MMCARGS ""
140#endif /* CONFIG_MMC */
141
142#ifndef CONFIG_SPL_BUILD
143#define CONFIG_EXTRA_ENV_SETTINGS \
7ae47f6b 144BUR_COMMON_ENV \
662a4765 145"verify=no\0" \
7ae47f6b 146"autoload=0\0" \
662a4765
HP
147"dtb=bur-ppt-ts30.dtb\0" \
148"dtbaddr=0x80100000\0" \
149"loadaddr=0x80200000\0" \
150"ramaddr=0x80A00000\0" \
151"kernel=zImage\0" \
152"ramdisk=rootfs.cpio.uboot\0" \
153"console=ttyO0,115200n8\0" \
14ec12fa 154"optargs=consoleblank=0 quiet panic=2\0" \
662a4765
HP
155"nfsroot=/tftpboot/tseries/rootfs-small\0" \
156"nfsopts=nolock\0" \
157"ramargs=setenv bootargs ${optargs} console=${console} root=/dev/ram0\0" \
158"netargs=setenv bootargs console=${console} " \
159 "${optargs} " \
160 "root=/dev/nfs " \
161 "nfsroot=${serverip}:${nfsroot},${nfsopts} rw " \
162 "ip=dhcp\0" \
163"netboot=echo Booting from network ...; " \
164 "dhcp; " \
165 "tftp ${loadaddr} ${kernel}; " \
166 "tftp ${dtbaddr} ${dtb}; " \
167 "run netargs; " \
168 "bootz ${loadaddr} - ${dtbaddr}\0" \
169"ramboot=echo Booting from network into RAM ...; "\
170 "if dhcp; then; " \
171 "tftp ${loadaddr} ${kernel}; " \
172 "tftp ${ramaddr} ${ramdisk}; " \
173 "if ext4load ${dtbdev} ${dtbpart} ${dtbaddr} /${dtb}; " \
174 "then; else tftp ${dtbaddr} ${dtb}; fi;" \
175 "run mmcroot0; " \
176 "bootz ${loadaddr} ${ramaddr} ${dtbaddr}; fi;\0" \
662a4765
HP
177"netupdate=echo Updating UBOOT from Network (TFTP) ...; " \
178 "setenv autoload 0; " \
179 "dhcp && tftp 0x80000000 updateUBOOT.img && source;\0" \
7ae47f6b
HP
180NANDARGS \
181MMCARGS
893c04e1
HP
182#endif /* !CONFIG_SPL_BUILD*/
183
184#define CONFIG_BOOTCOMMAND \
662a4765 185 "run defboot;"
893c04e1
HP
186
187#ifdef CONFIG_NAND
188/*
189 * GPMC block. We support 1 device and the physical address to
190 * access CS0 at is 0x8000000.
191 */
192#define CONFIG_SYS_MAX_NAND_DEVICE 1
193#define CONFIG_SYS_NAND_BASE 0x8000000
194#define CONFIG_NAND_OMAP_GPMC
893c04e1
HP
195/* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
196#define CONFIG_NAND_OMAP_ELM
197#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
893c04e1
HP
198#define CONFIG_SYS_NAND_5_ADDR_CYCLE
199#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
200#define CONFIG_SYS_NAND_PAGE_SIZE 2048
201#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
202 CONFIG_SYS_NAND_PAGE_SIZE)
203#define CONFIG_SYS_NAND_OOBSIZE 64
204#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
205#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, \
206 10, 11, 12, 13, 14, 15, 16, 17, \
207 18, 19, 20, 21, 22, 23, 24, 25, \
208 26, 27, 28, 29, 30, 31, 32, 33, \
209 34, 35, 36, 37, 38, 39, 40, 41, \
210 42, 43, 44, 45, 46, 47, 48, 49, \
211 50, 51, 52, 53, 54, 55, 56, 57, }
212
213#define CONFIG_SYS_NAND_ECCSIZE 512
214#define CONFIG_SYS_NAND_ECCBYTES 14
215
216#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
217#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
218
219#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
220#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:" \
d79c138c
HP
221 "128k(MLO)," \
222 "128k(MLO.backup)," \
223 "128k(dtb)," \
893c04e1 224 "128k(u-boot-env)," \
d79c138c
HP
225 "512k(u-boot)," \
226 "4m(kernel),"\
227 "128m(rootfs),"\
228 "-(user)"
229#define CONFIG_NAND_OMAP_GPMC_WSCFG 1
893c04e1
HP
230#endif /* CONFIG_NAND */
231
232/* USB configuration */
233#define CONFIG_USB_MUSB_DSPS
95de1e2f
PK
234#define CONFIG_USB_MUSB_PIO_ONLY
235#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
893c04e1
HP
236#define CONFIG_AM335X_USB0
237#define CONFIG_AM335X_USB0_MODE MUSB_HOST
238#define CONFIG_AM335X_USB1
239#define CONFIG_AM335X_USB1_MODE MUSB_HOST
240
893c04e1
HP
241#if defined(CONFIG_SPI_BOOT)
242/* McSPI IP block */
243#define CONFIG_SPI
244#define CONFIG_OMAP3_SPI
893c04e1
HP
245#define CONFIG_SF_DEFAULT_SPEED 24000000
246
893c04e1 247#define CONFIG_SPL_SPI_LOAD
893c04e1
HP
248#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
249#undef CONFIG_ENV_IS_NOWHERE
250#define CONFIG_ENV_IS_IN_SPI_FLASH
251#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
252#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
253#define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */
254#define CONFIG_ENV_OFFSET (768 << 10) /* 768 KiB in */
255#define CONFIG_ENV_OFFSET_REDUND (896 << 10) /* 896 KiB in */
256
257#elif defined(CONFIG_EMMC_BOOT)
258#undef CONFIG_ENV_IS_NOWHERE
259#define CONFIG_ENV_IS_IN_MMC
46c8ebc8 260#define CONFIG_SYS_MMC_ENV_DEV 0
893c04e1
HP
261#define CONFIG_SYS_MMC_ENV_PART 2
262#define CONFIG_ENV_OFFSET 0x40000 /* TODO: Adresse definieren */
263#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
264#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
265
266#elif defined(CONFIG_NAND)
e017fd61
TR
267/* No NAND env support in SPL */
268#ifdef CONFIG_SPL_BUILD
269#define CONFIG_ENV_IS_NOWHERE
270#else
893c04e1 271#define CONFIG_ENV_IS_IN_NAND
e017fd61 272#endif
d79c138c 273#define CONFIG_ENV_OFFSET 0x60000
893c04e1
HP
274#define CONFIG_SYS_ENV_SECT_SIZE CONFIG_ENV_SIZE
275#else
276#error "no storage for Environment defined!"
277#endif
278/*
279 * Common filesystems support. When we have removable storage we
280 * enabled a number of useful commands and support.
281 */
282#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
893c04e1 283#define CONFIG_FAT_WRITE
c05c2967
HP
284#define CONFIG_FS_EXT4
285#define CONFIG_EXT4_WRITE
893c04e1
HP
286#endif /* CONFIG_MMC, ... */
287
2290fe06 288#endif /* ! __CONFIG_BRPPT1_H__ */
This page took 0.409944 seconds and 4 git commands to generate.