[u-boot.git] / common / cli.c

// SPDX-License-Identifier: GPL-2.0+
/*
 * (C) Copyright 2000
 * Wolfgang Denk, DENX Software Engineering, [email protected].
 *
 * Add to readline cmdline-editing by
 * (C) Copyright 2005
 * JinHua Luo, GuangDong Linux Center, <[email protected]>
 */

#define pr_fmt(fmt) "cli: %s: " fmt, __func__

#include <ansi.h>
#include <bootstage.h>
#include <cli.h>
#include <cli_hush.h>
#include <command.h>
#include <console.h>
#include <env.h>
#include <fdtdec.h>
#include <hang.h>
#include <malloc.h>
#include <asm/global_data.h>
#include <dm/ofnode.h>
#include <linux/errno.h>

#ifdef CONFIG_CMDLINE

static inline bool use_hush_old(void)
{
	return IS_ENABLED(CONFIG_HUSH_SELECTABLE) ?
	gd->flags & GD_FLG_HUSH_OLD_PARSER :
	IS_ENABLED(CONFIG_HUSH_OLD_PARSER);
}

/*
 * Run a command using the selected parser.
 *
 * @param cmd	Command to run
 * @param flag	Execution flags (CMD_FLAG_...)
 * Return: 0 on success, or != 0 on error.
 */
int run_command(const char *cmd, int flag)
{
#if !IS_ENABLED(CONFIG_HUSH_PARSER)
	/*
	 * cli_run_command can return 0 or 1 for success, so clean up
	 * its result.
	 */
	if (cli_simple_run_command(cmd, flag) == -1)
		return 1;

	return 0;
#else
	if (use_hush_old()) {
		int hush_flags = FLAG_PARSE_SEMICOLON | FLAG_EXIT_FROM_LOOP;

		if (flag & CMD_FLAG_ENV)
			hush_flags |= FLAG_CONT_ON_NEWLINE;
		return parse_string_outer(cmd, hush_flags);
	}
	/*
	 * Possible values for flags are the following:
	 * FLAG_EXIT_FROM_LOOP: This flags ensures we exit from loop in
	 * parse_and_run_stream() after first iteration while normal
	 * behavior, * i.e. when called from cli_loop(), is to loop
	 * infinitely.
	 * FLAG_PARSE_SEMICOLON: modern Hush parses ';' and does not stop
	 * first time it sees one. So, I think we do not need this flag.
	 * FLAG_REPARSING: For the moment, I do not understand the goal
	 * of this flag.
	 * FLAG_CONT_ON_NEWLINE: This flag seems to be used to continue
	 * parsing even when reading '\n' when coming from
	 * run_command(). In this case, modern Hush reads until it finds
	 * '\0'. So, I think we do not need this flag.
	 */
	return parse_string_outer_modern(cmd, FLAG_EXIT_FROM_LOOP);
#endif
}

/*
 * Run a command using the selected parser, and check if it is repeatable.
 *
 * @param cmd	Command to run
 * @param flag	Execution flags (CMD_FLAG_...)
 * Return: 0 (not repeatable) or 1 (repeatable) on success, -1 on error.
 */
int run_command_repeatable(const char *cmd, int flag)
{
#ifndef CONFIG_HUSH_PARSER
	return cli_simple_run_command(cmd, flag);
#else
	int ret;

	if (use_hush_old()) {
		ret = parse_string_outer(cmd,
					 FLAG_PARSE_SEMICOLON
					 | FLAG_EXIT_FROM_LOOP);
	} else {
		ret = parse_string_outer_modern(cmd,
					      FLAG_PARSE_SEMICOLON
					      | FLAG_EXIT_FROM_LOOP);
	}

	/*
	 * parse_string_outer() returns 1 for failure, so clean up
	 * its result.
	 */
	if (ret)
		return -1;

	return 0;
#endif
}
#else
__weak int board_run_command(const char *cmdline)
{
	printf("## Commands are disabled. Please enable CONFIG_CMDLINE.\n");

	return 1;
}
#endif /* CONFIG_CMDLINE */

int run_command_list(const char *cmd, int len, int flag)
{
	int need_buff = 1;
	char *buff = (char *)cmd;	/* cast away const */
	int rcode = 0;

	if (len == -1) {
		len = strlen(cmd);
#ifdef CONFIG_HUSH_PARSER
		/* hush will never change our string */
		need_buff = 0;
#else
		/* the built-in parser will change our string if it sees \n */
		need_buff = strchr(cmd, '\n') != NULL;
#endif
	}
	if (need_buff) {
		buff = malloc(len + 1);
		if (!buff)
			return 1;
		memcpy(buff, cmd, len);
		buff[len] = '\0';
	}
#ifdef CONFIG_HUSH_PARSER
	if (use_hush_old()) {
		rcode = parse_string_outer(buff, FLAG_PARSE_SEMICOLON);
	} else {
		rcode = parse_string_outer_modern(buff, FLAG_PARSE_SEMICOLON);
	}
#else
	/*
	 * This function will overwrite any \n it sees with a \0, which
	 * is why it can't work with a const char *. Here we are making
	 * using of internal knowledge of this function, to avoid always
	 * doing a malloc() which is actually required only in a case that
	 * is pretty rare.
	 */
#ifdef CONFIG_CMDLINE
	rcode = cli_simple_run_command_list(buff, flag);
#else
	rcode = board_run_command(buff);
#endif
#endif
	if (need_buff)
		free(buff);

	return rcode;
}

int run_commandf(const char *fmt, ...)
{
	va_list args;
	int nbytes;

	va_start(args, fmt);
	/*
	 * Limit the console_buffer space being used to CONFIG_SYS_CBSIZE,
	 * because its last byte is used to fit the replacement of \0 by \n\0
	 * in underlying hush parser
	 */
	nbytes = vsnprintf(console_buffer, CONFIG_SYS_CBSIZE, fmt, args);
	va_end(args);

	if (nbytes < 0) {
		pr_debug("I/O internal error occurred.\n");
		return -EIO;
	} else if (nbytes >= CONFIG_SYS_CBSIZE) {
		pr_debug("'fmt' size:%d exceeds the limit(%d)\n",
			 nbytes, CONFIG_SYS_CBSIZE);
		return -ENOSPC;
	}
	return run_command(console_buffer, 0);
}

/****************************************************************************/

#if defined(CONFIG_CMD_RUN)
int do_run(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
{
	int i, ret;

	if (argc < 2)
		return CMD_RET_USAGE;

	for (i = 1; i < argc; ++i) {
		char *arg;

		arg = env_get(argv[i]);
		if (arg == NULL) {
			printf("## Error: \"%s\" not defined\n", argv[i]);
			return 1;
		}

		ret = run_command(arg, flag | CMD_FLAG_ENV);
		if (ret)
			return ret;
	}
	return 0;
}
#endif

#if CONFIG_IS_ENABLED(OF_CONTROL)
bool cli_process_fdt(const char **cmdp)
{
	/* Allow the fdt to override the boot command */
	const char *env = ofnode_conf_read_str("bootcmd");
	if (env)
		*cmdp = env;
	/*
	 * If the bootsecure option was chosen, use secure_boot_cmd().
	 * Always use 'env' in this case, since bootsecure requres that the
	 * bootcmd was specified in the FDT too.
	 */
	return ofnode_conf_read_int("bootsecure", 0);
}

/*
 * Runs the given boot command securely.  Specifically:
 * - Doesn't run the command with the shell (run_command or parse_string_outer),
 *   since that's a lot of code surface that an attacker might exploit.
 *   Because of this, we don't do any argument parsing--the secure boot command
 *   has to be a full-fledged u-boot command.
 * - Doesn't check for keypresses before booting, since that could be a
 *   security hole; also disables Ctrl-C.
 * - Doesn't allow the command to return.
 *
 * Upon any failures, this function will drop into an infinite loop after
 * printing the error message to console.
 */
void cli_secure_boot_cmd(const char *cmd)
{
#ifdef CONFIG_CMDLINE
	struct cmd_tbl *cmdtp;
#endif
	int rc;

	if (!cmd) {
		printf("## Error: Secure boot command not specified\n");
		goto err;
	}

	/* Disable Ctrl-C just in case some command is used that checks it. */
	disable_ctrlc(1);

	/* Find the command directly. */
#ifdef CONFIG_CMDLINE
	cmdtp = find_cmd(cmd);
	if (!cmdtp) {
		printf("## Error: \"%s\" not defined\n", cmd);
		goto err;
	}

	/* Run the command, forcing no flags and faking argc and argv. */
	rc = (cmdtp->cmd)(cmdtp, 0, 1, (char **)&cmd);

#else
	rc = board_run_command(cmd);
#endif

	/* Shouldn't ever return from boot command. */
	printf("## Error: \"%s\" returned (code %d)\n", cmd, rc);

err:
	/*
	 * Not a whole lot to do here.  Rebooting won't help much, since we'll
	 * just end up right back here.  Just loop.
	 */
	hang();
}
#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */

void cli_loop(void)
{
	bootstage_mark(BOOTSTAGE_ID_ENTER_CLI_LOOP);
#if CONFIG_IS_ENABLED(HUSH_PARSER)
	if (gd->flags & GD_FLG_HUSH_MODERN_PARSER)
		parse_and_run_file();
	else if (gd->flags & GD_FLG_HUSH_OLD_PARSER)
		parse_file_outer();

	printf("Problem\n");
	/* This point is never reached */
	for (;;);
#elif defined(CONFIG_CMDLINE)
	cli_simple_loop();
#else
	printf("## U-Boot command line is disabled. Please enable CONFIG_CMDLINE\n");
#endif /*CONFIG_HUSH_PARSER*/
}

void cli_init(void)
{
#ifdef CONFIG_HUSH_PARSER
	/* This if block is used to initialize hush parser gd flag. */
	if (!(gd->flags & GD_FLG_HUSH_OLD_PARSER)
		&& !(gd->flags & GD_FLG_HUSH_MODERN_PARSER)) {
		if (CONFIG_IS_ENABLED(HUSH_OLD_PARSER))
			gd->flags |= GD_FLG_HUSH_OLD_PARSER;
		else if (CONFIG_IS_ENABLED(HUSH_MODERN_PARSER))
			gd->flags |= GD_FLG_HUSH_MODERN_PARSER;
	}

	if (gd->flags & GD_FLG_HUSH_OLD_PARSER) {
		u_boot_hush_start();
	} else if (gd->flags & GD_FLG_HUSH_MODERN_PARSER) {
		u_boot_hush_start_modern();
	} else {
		printf("No valid hush parser to use, cli will not initialized!\n");
		return;
	}
#endif

#if defined(CONFIG_HUSH_INIT_VAR)
	hush_init_var();
#endif

	if (CONFIG_IS_ENABLED(VIDEO_ANSI))
		printf(ANSI_CURSOR_SHOW "\n");
}
Commit	Line	Data
83d290c5	1	// SPDX-License-Identifier: GPL-2.0+
30354978 SG	2	/*
	3	* (C) Copyright 2000
	4	* Wolfgang Denk, DENX Software Engineering, [email protected].
	5	*
	6	* Add to readline cmdline-editing by
	7	* (C) Copyright 2005
	8	* JinHua Luo, GuangDong Linux Center, <[email protected]>
30354978 SG	9	*/
30354978 SG	10
26f923c7 EB	11	#define pr_fmt(fmt) "cli: %s: " fmt, __func__
26f923c7 EB	12
d2e4b2fa	13	#include <ansi.h>
52f24238	14	#include <bootstage.h>
30354978 SG	15	#include <cli.h>
30354978 SG	16	#include <cli_hush.h>
288b29e4	17	#include <command.h>
24b852a7	18	#include <console.h>
7b51b576	19	#include <env.h>
affb2156	20	#include <fdtdec.h>
db41d65a	21	#include <hang.h>
30354978	22	#include <malloc.h>
401d1c4f	23	#include <asm/global_data.h>
7de8bd03	24	#include <dm/ofnode.h>
26f923c7	25	#include <linux/errno.h>
affb2156	26
f8bb6964	27	#ifdef CONFIG_CMDLINE
3ea3c57e FL	28
	29	static inline bool use_hush_old(void)
	30	{
	31	return IS_ENABLED(CONFIG_HUSH_SELECTABLE) ?
	32	gd->flags & GD_FLG_HUSH_OLD_PARSER :
	33	IS_ENABLED(CONFIG_HUSH_OLD_PARSER);
	34	}
	35
30354978 SG	36	/*
	37	* Run a command using the selected parser.
	38	*
	39	* @param cmd Command to run
	40	* @param flag Execution flags (CMD_FLAG_...)
185f812c	41	* Return: 0 on success, or != 0 on error.
30354978 SG	42	*/
	43	int run_command(const char *cmd, int flag)
	44	{
b84d23d0	45	#if !IS_ENABLED(CONFIG_HUSH_PARSER)
30354978 SG	46	/*
	47	* cli_run_command can return 0 or 1 for success, so clean up
	48	* its result.
	49	*/
	50	if (cli_simple_run_command(cmd, flag) == -1)
	51	return 1;
	52
	53	return 0;
3ea3c57e FL	54	#else
	55	if (use_hush_old()) {
	56	int hush_flags = FLAG_PARSE_SEMICOLON \| FLAG_EXIT_FROM_LOOP;
	57
	58	if (flag & CMD_FLAG_ENV)
	59	hush_flags \|= FLAG_CONT_ON_NEWLINE;
	60	return parse_string_outer(cmd, hush_flags);
	61	}
	62	/*
	63	* Possible values for flags are the following:
	64	* FLAG_EXIT_FROM_LOOP: This flags ensures we exit from loop in
	65	* parse_and_run_stream() after first iteration while normal
	66	* behavior, * i.e. when called from cli_loop(), is to loop
	67	* infinitely.
	68	* FLAG_PARSE_SEMICOLON: modern Hush parses ';' and does not stop
	69	* first time it sees one. So, I think we do not need this flag.
	70	* FLAG_REPARSING: For the moment, I do not understand the goal
	71	* of this flag.
	72	* FLAG_CONT_ON_NEWLINE: This flag seems to be used to continue
	73	* parsing even when reading '\n' when coming from
	74	* run_command(). In this case, modern Hush reads until it finds
	75	* '\0'. So, I think we do not need this flag.
	76	*/
	77	return parse_string_outer_modern(cmd, FLAG_EXIT_FROM_LOOP);
30354978 SG	78	#endif
	79	}
	80
1d43bfd2 TB	81	/*
	82	* Run a command using the selected parser, and check if it is repeatable.
	83	*
	84	* @param cmd Command to run
	85	* @param flag Execution flags (CMD_FLAG_...)
185f812c	86	* Return: 0 (not repeatable) or 1 (repeatable) on success, -1 on error.
1d43bfd2 TB	87	*/
	88	int run_command_repeatable(const char *cmd, int flag)
	89	{
f1f9d4fa	90	#ifndef CONFIG_HUSH_PARSER
1d43bfd2 TB	91	return cli_simple_run_command(cmd, flag);
1d43bfd2 TB	92	#else
3ea3c57e FL	93	int ret;
	94
	95	if (use_hush_old()) {
	96	ret = parse_string_outer(cmd,
	97	FLAG_PARSE_SEMICOLON
	98	\| FLAG_EXIT_FROM_LOOP);
	99	} else {
	100	ret = parse_string_outer_modern(cmd,
	101	FLAG_PARSE_SEMICOLON
	102	\| FLAG_EXIT_FROM_LOOP);
	103	}
	104
1d43bfd2 TB	105	/*
	106	* parse_string_outer() returns 1 for failure, so clean up
	107	* its result.
	108	*/
3ea3c57e	109	if (ret)
1d43bfd2 TB	110	return -1;
	111
	112	return 0;
	113	#endif
	114	}
19464f4f SA	115	#else
	116	__weak int board_run_command(const char *cmdline)
	117	{
	118	printf("## Commands are disabled. Please enable CONFIG_CMDLINE.\n");
	119
	120	return 1;
	121	}
f8bb6964	122	#endif /* CONFIG_CMDLINE */
1d43bfd2	123
30354978 SG	124	int run_command_list(const char *cmd, int len, int flag)
	125	{
	126	int need_buff = 1;
	127	char buff = (char )cmd; /* cast away const */
	128	int rcode = 0;
	129
	130	if (len == -1) {
	131	len = strlen(cmd);
f1f9d4fa	132	#ifdef CONFIG_HUSH_PARSER
30354978 SG	133	/* hush will never change our string */
	134	need_buff = 0;
	135	#else
	136	/* the built-in parser will change our string if it sees \n */
	137	need_buff = strchr(cmd, '\n') != NULL;
	138	#endif
	139	}
	140	if (need_buff) {
	141	buff = malloc(len + 1);
	142	if (!buff)
	143	return 1;
	144	memcpy(buff, cmd, len);
	145	buff[len] = '\0';
	146	}
f1f9d4fa	147	#ifdef CONFIG_HUSH_PARSER
3ea3c57e FL	148	if (use_hush_old()) {
	149	rcode = parse_string_outer(buff, FLAG_PARSE_SEMICOLON);
	150	} else {
	151	rcode = parse_string_outer_modern(buff, FLAG_PARSE_SEMICOLON);
	152	}
30354978 SG	153	#else
	154	/*
	155	* This function will overwrite any \n it sees with a \0, which
	156	* is why it can't work with a const char *. Here we are making
	157	* using of internal knowledge of this function, to avoid always
	158	* doing a malloc() which is actually required only in a case that
	159	* is pretty rare.
	160	*/
f8bb6964	161	#ifdef CONFIG_CMDLINE
30354978	162	rcode = cli_simple_run_command_list(buff, flag);
f8bb6964 SG	163	#else
	164	rcode = board_run_command(buff);
	165	#endif
09a78862	166	#endif
30354978 SG	167	if (need_buff)
30354978 SG	168	free(buff);
30354978 SG	169
	170	return rcode;
	171	}
	172
74724484 SG	173	int run_commandf(const char *fmt, ...)
	174	{
	175	va_list args;
26f923c7	176	int nbytes;
74724484 SG	177
74724484 SG	178	va_start(args, fmt);
26f923c7 EB	179	/*
	180	* Limit the console_buffer space being used to CONFIG_SYS_CBSIZE,
	181	* because its last byte is used to fit the replacement of \0 by \n\0
	182	* in underlying hush parser
	183	*/
	184	nbytes = vsnprintf(console_buffer, CONFIG_SYS_CBSIZE, fmt, args);
74724484 SG	185	va_end(args);
74724484 SG	186
26f923c7 EB	187	if (nbytes < 0) {
	188	pr_debug("I/O internal error occurred.\n");
	189	return -EIO;
	190	} else if (nbytes >= CONFIG_SYS_CBSIZE) {
	191	pr_debug("'fmt' size:%d exceeds the limit(%d)\n",
	192	nbytes, CONFIG_SYS_CBSIZE);
	193	return -ENOSPC;
	194	}
	195	return run_command(console_buffer, 0);
74724484 SG	196	}
74724484 SG	197
30354978 SG	198	/****************************************************************************/
	199
	200	#if defined(CONFIG_CMD_RUN)
09140113	201	int do_run(struct cmd_tbl cmdtp, int flag, int argc, char const argv[])
30354978	202	{
721307eb	203	int i, ret;
30354978 SG	204
	205	if (argc < 2)
	206	return CMD_RET_USAGE;
	207
	208	for (i = 1; i < argc; ++i) {
	209	char *arg;
	210
00caae6d	211	arg = env_get(argv[i]);
30354978 SG	212	if (arg == NULL) {
	213	printf("## Error: \"%s\" not defined\n", argv[i]);
	214	return 1;
	215	}
	216
721307eb MV	217	ret = run_command(arg, flag \| CMD_FLAG_ENV);
	218	if (ret)
	219	return ret;
30354978 SG	220	}
	221	return 0;
	222	}
	223	#endif
c1bb2cd0	224
0f925822	225	#if CONFIG_IS_ENABLED(OF_CONTROL)
affb2156 SG	226	bool cli_process_fdt(const char **cmdp)
	227	{
	228	/* Allow the fdt to override the boot command */
7de8bd03	229	const char *env = ofnode_conf_read_str("bootcmd");
affb2156 SG	230	if (env)
	231	*cmdp = env;
	232	/*
	233	* If the bootsecure option was chosen, use secure_boot_cmd().
	234	* Always use 'env' in this case, since bootsecure requres that the
	235	* bootcmd was specified in the FDT too.
	236	*/
7de8bd03	237	return ofnode_conf_read_int("bootsecure", 0);
affb2156 SG	238	}
	239
	240	/*
	241	* Runs the given boot command securely. Specifically:
	242	* - Doesn't run the command with the shell (run_command or parse_string_outer),
	243	* since that's a lot of code surface that an attacker might exploit.
	244	* Because of this, we don't do any argument parsing--the secure boot command
	245	* has to be a full-fledged u-boot command.
	246	* - Doesn't check for keypresses before booting, since that could be a
	247	* security hole; also disables Ctrl-C.
	248	* - Doesn't allow the command to return.
	249	*
	250	* Upon any failures, this function will drop into an infinite loop after
	251	* printing the error message to console.
	252	*/
	253	void cli_secure_boot_cmd(const char *cmd)
	254	{
f8bb6964	255	#ifdef CONFIG_CMDLINE
09140113	256	struct cmd_tbl *cmdtp;
f8bb6964	257	#endif
affb2156 SG	258	int rc;
	259
	260	if (!cmd) {
	261	printf("## Error: Secure boot command not specified\n");
	262	goto err;
	263	}
	264
	265	/* Disable Ctrl-C just in case some command is used that checks it. */
	266	disable_ctrlc(1);
	267
	268	/* Find the command directly. */
f8bb6964	269	#ifdef CONFIG_CMDLINE
affb2156 SG	270	cmdtp = find_cmd(cmd);
	271	if (!cmdtp) {
	272	printf("## Error: \"%s\" not defined\n", cmd);
	273	goto err;
	274	}
	275
	276	/* Run the command, forcing no flags and faking argc and argv. */
	277	rc = (cmdtp->cmd)(cmdtp, 0, 1, (char **)&cmd);
	278
f8bb6964 SG	279	#else
	280	rc = board_run_command(cmd);
	281	#endif
	282
affb2156 SG	283	/* Shouldn't ever return from boot command. */
	284	printf("## Error: \"%s\" returned (code %d)\n", cmd, rc);
	285
	286	err:
	287	/*
	288	* Not a whole lot to do here. Rebooting won't help much, since we'll
	289	* just end up right back here. Just loop.
	290	*/
	291	hang();
	292	}
0f925822	293	#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
affb2156	294
c1bb2cd0 SG	295	void cli_loop(void)
c1bb2cd0 SG	296	{
b07cc48c	297	bootstage_mark(BOOTSTAGE_ID_ENTER_CLI_LOOP);
9a068377 FL	298	#if CONFIG_IS_ENABLED(HUSH_PARSER)
	299	if (gd->flags & GD_FLG_HUSH_MODERN_PARSER)
	300	parse_and_run_file();
	301	else if (gd->flags & GD_FLG_HUSH_OLD_PARSER)
	302	parse_file_outer();
	303
	304	printf("Problem\n");
c1bb2cd0 SG	305	/* This point is never reached */
c1bb2cd0 SG	306	for (;;);
30eae26b	307	#elif defined(CONFIG_CMDLINE)
c1bb2cd0	308	cli_simple_loop();
f8bb6964 SG	309	#else
f8bb6964 SG	310	printf("## U-Boot command line is disabled. Please enable CONFIG_CMDLINE\n");
f1f9d4fa	311	#endif /CONFIG_HUSH_PARSER/
c1bb2cd0 SG	312	}
	313
	314	void cli_init(void)
	315	{
f1f9d4fa	316	#ifdef CONFIG_HUSH_PARSER
9a068377	317	/* This if block is used to initialize hush parser gd flag. */
6bb39f5d	318	if (!(gd->flags & GD_FLG_HUSH_OLD_PARSER)
9a068377 FL	319	&& !(gd->flags & GD_FLG_HUSH_MODERN_PARSER)) {
	320	if (CONFIG_IS_ENABLED(HUSH_OLD_PARSER))
	321	gd->flags \|= GD_FLG_HUSH_OLD_PARSER;
	322	else if (CONFIG_IS_ENABLED(HUSH_MODERN_PARSER))
	323	gd->flags \|= GD_FLG_HUSH_MODERN_PARSER;
	324	}
	325
	326	if (gd->flags & GD_FLG_HUSH_OLD_PARSER) {
	327	u_boot_hush_start();
	328	} else if (gd->flags & GD_FLG_HUSH_MODERN_PARSER) {
	329	u_boot_hush_start_modern();
	330	} else {
	331	printf("No valid hush parser to use, cli will not initialized!\n");
	332	return;
	333	}
c1bb2cd0 SG	334	#endif
	335
	336	#if defined(CONFIG_HUSH_INIT_VAR)
	337	hush_init_var();
	338	#endif
d2e4b2fa HS	339
	340	if (CONFIG_IS_ENABLED(VIDEO_ANSI))
	341	printf(ANSI_CURSOR_SHOW "\n");
c1bb2cd0	342	}