dont do self test

[secp256k1.git] / configure.ac

diff --git a/configure.ac b/configure.ac
index 68c45a56f0aa09d88888ff94c9a43e48cb78b86f..9969cfa343226f06cdb8899929fb3a96929332ee 100644 (file)
--- a/configure.ac
+++ b/configure.ac
@@ -7,9 +7,10 @@ AH_TOP([#ifndef LIBSECP256K1_CONFIG_H])
 AH_TOP([#define LIBSECP256K1_CONFIG_H])
 AH_BOTTOM([#endif /*LIBSECP256K1_CONFIG_H*/])
 AM_INIT_AUTOMAKE([foreign subdir-objects])
 AH_TOP([#define LIBSECP256K1_CONFIG_H])
 AH_BOTTOM([#endif /*LIBSECP256K1_CONFIG_H*/])
 AM_INIT_AUTOMAKE([foreign subdir-objects])

+

 LT_INIT
 
 LT_INIT
 

-dnl make the compilation flags quiet unless V=1 is used
+# Make the compilation flags quiet unless V=1 is used.

 m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
 
 PKG_PROG_PKG_CONFIG
 m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
 
 PKG_PROG_PKG_CONFIG


@@ -17,13 +18,16 @@ PKG_PROG_PKG_CONFIG
 AC_PATH_TOOL(AR, ar)
 AC_PATH_TOOL(RANLIB, ranlib)
 AC_PATH_TOOL(STRIP, strip)
 AC_PATH_TOOL(AR, ar)
 AC_PATH_TOOL(RANLIB, ranlib)
 AC_PATH_TOOL(STRIP, strip)

-AX_PROG_CC_FOR_BUILD
-
-if test "x$CFLAGS" = "x"; then
-  CFLAGS="-g"
-fi

 
 

+# Save definition of AC_PROG_CC because AM_PROG_CC_C_O in automake<=1.13 will
+# redefine AC_PROG_CC to exit with an error, which avoids the user calling it
+# accidently and screwing up the effect of AM_PROG_CC_C_O. However, we'll need
+# AC_PROG_CC later on in AX_PROG_CC_FOR_BUILD, where its usage is fine, and
+# we'll carefully make sure not to call AC_PROG_CC anywhere else.
+m4_copy([AC_PROG_CC], [saved_AC_PROG_CC])

 AM_PROG_CC_C_O
 AM_PROG_CC_C_O

+# Restore AC_PROG_CC
+m4_rename_force([saved_AC_PROG_CC], [AC_PROG_CC])

 
 AC_PROG_CC_C89
 if test x"$ac_cv_prog_cc_c89" = x"no"; then
 
 AC_PROG_CC_C89
 if test x"$ac_cv_prog_cc_c89" = x"no"; then


@@ -34,27 +38,26 @@ AM_PROG_AS
 case $host_os in
   *darwin*)
      if  test x$cross_compiling != xyes; then
 case $host_os in
   *darwin*)
      if  test x$cross_compiling != xyes; then

-       AC_PATH_PROG([BREW],brew,)
-       if test x$BREW != x; then
-         dnl These Homebrew packages may be keg-only, meaning that they won't be found
-         dnl in expected paths because they may conflict with system files. Ask
-         dnl Homebrew where each one is located, then adjust paths accordingly.
-
+       AC_CHECK_PROG([BREW], brew, brew)
+       if test x$BREW = xbrew; then
+         # These Homebrew packages may be keg-only, meaning that they won't be found
+         # in expected paths because they may conflict with system files. Ask
+         # Homebrew where each one is located, then adjust paths accordingly.

          openssl_prefix=`$BREW --prefix openssl 2>/dev/null`
          openssl_prefix=`$BREW --prefix openssl 2>/dev/null`

-         gmp_prefix=`$BREW --prefix gmp 2>/dev/null`
+         valgrind_prefix=`$BREW --prefix valgrind 2>/dev/null`

          if test x$openssl_prefix != x; then
            PKG_CONFIG_PATH="$openssl_prefix/lib/pkgconfig:$PKG_CONFIG_PATH"
            export PKG_CONFIG_PATH
          if test x$openssl_prefix != x; then
            PKG_CONFIG_PATH="$openssl_prefix/lib/pkgconfig:$PKG_CONFIG_PATH"
            export PKG_CONFIG_PATH

+           CRYPTO_CPPFLAGS="-I$openssl_prefix/include"

          fi
          fi

-         if test x$gmp_prefix != x; then
-           GMP_CPPFLAGS="-I$gmp_prefix/include"
-           GMP_LIBS="-L$gmp_prefix/lib"
+         if test x$valgrind_prefix != x; then
+           VALGRIND_CPPFLAGS="-I$valgrind_prefix/include"

          fi
        else
          fi
        else

-         AC_PATH_PROG([PORT],port,)
-         dnl if homebrew isn't installed and macports is, add the macports default paths
-         dnl as a last resort.
-         if test x$PORT != x; then
+         AC_CHECK_PROG([PORT], port, port)
+         # If homebrew isn't installed and macports is, add the macports default paths
+         # as a last resort.
+         if test x$PORT = xport; then

            CPPFLAGS="$CPPFLAGS -isystem /opt/local/include"
            LDFLAGS="$LDFLAGS -L/opt/local/lib"
          fi
            CPPFLAGS="$CPPFLAGS -isystem /opt/local/include"
            LDFLAGS="$LDFLAGS -L/opt/local/lib"
          fi


@@ -63,136 +66,163 @@ case $host_os in
    ;;
 esac
 
    ;;
 esac
 

-CFLAGS="$CFLAGS -W"
-
-warn_CFLAGS="-std=c89 -pedantic -Wall -Wextra -Wcast-align -Wnested-externs -Wshadow -Wstrict-prototypes -Wno-unused-function -Wno-long-long -Wno-overlength-strings"
-saved_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS $warn_CFLAGS"
-AC_MSG_CHECKING([if ${CC} supports ${warn_CFLAGS}])
-AC_COMPILE_IFELSE([AC_LANG_SOURCE([[char foo;]])],
-    [ AC_MSG_RESULT([yes]) ],
-    [ AC_MSG_RESULT([no])
-      CFLAGS="$saved_CFLAGS"
-    ])
-
-saved_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS -fvisibility=hidden"
-AC_MSG_CHECKING([if ${CC} supports -fvisibility=hidden])
-AC_COMPILE_IFELSE([AC_LANG_SOURCE([[char foo;]])],
-    [ AC_MSG_RESULT([yes]) ],
-    [ AC_MSG_RESULT([no])
-      CFLAGS="$saved_CFLAGS"
-    ])
+# Try if some desirable compiler flags are supported and append them to SECP_CFLAGS.
+#
+# These are our own flags, so we append them to our own SECP_CFLAGS variable (instead of CFLAGS) as
+# recommended in the automake manual (Section "Flag Variables Ordering"). CFLAGS belongs to the user
+# and we are not supposed to touch it. In the Makefile, we will need to ensure that SECP_CFLAGS
+# is prepended to CFLAGS when invoking the compiler so that the user always has the last word (flag).
+#
+# Another advantage of not touching CFLAGS is that the contents of CFLAGS will be picked up by
+# libtool for compiling helper executables. For example, when compiling for Windows, libtool will
+# generate entire wrapper executables (instead of simple wrapper scripts as on Unix) to ensure
+# proper operation of uninstalled programs linked by libtool against the uninstalled shared library.
+# These executables are compiled from C source file for which our flags may not be appropriate,
+# e.g., -std=c89 flag has lead to undesirable warnings in the past.
+#
+# TODO We should analogously not touch CPPFLAGS and LDFLAGS but currently there are no issues.
+AC_DEFUN([SECP_TRY_APPEND_DEFAULT_CFLAGS], [
+    # Try to append -Werror=unknown-warning-option to CFLAGS temporarily. Otherwise clang will
+    # not error out if it gets unknown warning flags and the checks here will always succeed
+    # no matter if clang knows the flag or not.
+    SECP_TRY_APPEND_DEFAULT_CFLAGS_saved_CFLAGS="$CFLAGS"
+    SECP_TRY_APPEND_CFLAGS([-Werror=unknown-warning-option], CFLAGS)
+
+    SECP_TRY_APPEND_CFLAGS([-std=c89 -pedantic -Wno-long-long -Wnested-externs -Wshadow -Wstrict-prototypes -Wundef], $1) # GCC >= 3.0, -Wlong-long is implied by -pedantic.
+    SECP_TRY_APPEND_CFLAGS([-Wno-overlength-strings], $1) # GCC >= 4.2, -Woverlength-strings is implied by -pedantic.
+    SECP_TRY_APPEND_CFLAGS([-Wall], $1) # GCC >= 2.95 and probably many other compilers
+    SECP_TRY_APPEND_CFLAGS([-Wno-unused-function], $1) # GCC >= 3.0, -Wunused-function is implied by -Wall.
+    SECP_TRY_APPEND_CFLAGS([-Wextra], $1) # GCC >= 3.4, this is the newer name of -W, which we don't use because older GCCs will warn about unused functions.
+    SECP_TRY_APPEND_CFLAGS([-Wcast-align], $1) # GCC >= 2.95
+    SECP_TRY_APPEND_CFLAGS([-Wcast-align=strict], $1) # GCC >= 8.0
+    SECP_TRY_APPEND_CFLAGS([-Wconditional-uninitialized], $1) # Clang >= 3.0 only
+    SECP_TRY_APPEND_CFLAGS([-fvisibility=hidden], $1) # GCC >= 4.0
+
+    CFLAGS="$SECP_TRY_APPEND_DEFAULT_CFLAGS_saved_CFLAGS"
+])
+SECP_TRY_APPEND_DEFAULT_CFLAGS(SECP_CFLAGS)
+
+###
+### Define config arguments
+###

 
 AC_ARG_ENABLE(benchmark,
 
 AC_ARG_ENABLE(benchmark,

-    AS_HELP_STRING([--enable-benchmark],[compile benchmark (default is yes)]),
+    AS_HELP_STRING([--enable-benchmark],[compile benchmark [default=yes]]),

     [use_benchmark=$enableval],
     [use_benchmark=yes])
 
 AC_ARG_ENABLE(coverage,
     [use_benchmark=$enableval],
     [use_benchmark=yes])
 
 AC_ARG_ENABLE(coverage,

-    AS_HELP_STRING([--enable-coverage],[enable compiler flags to support kcov coverage analysis]),
+    AS_HELP_STRING([--enable-coverage],[enable compiler flags to support kcov coverage analysis [default=no]]),

     [enable_coverage=$enableval],
     [enable_coverage=no])
 
 AC_ARG_ENABLE(tests,
     [enable_coverage=$enableval],
     [enable_coverage=no])
 
 AC_ARG_ENABLE(tests,

-    AS_HELP_STRING([--enable-tests],[compile tests (default is yes)]),
+    AS_HELP_STRING([--enable-tests],[compile tests [default=yes]]),

     [use_tests=$enableval],
     [use_tests=yes])
 
 AC_ARG_ENABLE(openssl_tests,
     [use_tests=$enableval],
     [use_tests=yes])
 
 AC_ARG_ENABLE(openssl_tests,

-    AS_HELP_STRING([--enable-openssl-tests],[enable OpenSSL tests, if OpenSSL is available (default is auto)]),
+    AS_HELP_STRING([--enable-openssl-tests],[enable OpenSSL tests [default=auto]]),

     [enable_openssl_tests=$enableval],
     [enable_openssl_tests=auto])
 
 AC_ARG_ENABLE(experimental,
     [enable_openssl_tests=$enableval],
     [enable_openssl_tests=auto])
 
 AC_ARG_ENABLE(experimental,

-    AS_HELP_STRING([--enable-experimental],[allow experimental configure options (default is no)]),
+    AS_HELP_STRING([--enable-experimental],[allow experimental configure options [default=no]]),

     [use_experimental=$enableval],
     [use_experimental=no])
 
 AC_ARG_ENABLE(exhaustive_tests,
     [use_experimental=$enableval],
     [use_experimental=no])
 
 AC_ARG_ENABLE(exhaustive_tests,

-    AS_HELP_STRING([--enable-exhaustive-tests],[compile exhaustive tests (default is yes)]),
+    AS_HELP_STRING([--enable-exhaustive-tests],[compile exhaustive tests [default=yes]]),

     [use_exhaustive_tests=$enableval],
     [use_exhaustive_tests=yes])
 
     [use_exhaustive_tests=$enableval],
     [use_exhaustive_tests=yes])
 

-AC_ARG_ENABLE(endomorphism,
-    AS_HELP_STRING([--enable-endomorphism],[enable endomorphism (default is no)]),
-    [use_endomorphism=$enableval],
-    [use_endomorphism=no])
-

 AC_ARG_ENABLE(ecmult_static_precomputation,
 AC_ARG_ENABLE(ecmult_static_precomputation,

-    AS_HELP_STRING([--enable-ecmult-static-precomputation],[enable precomputed ecmult table for signing (default is yes)]),
+    AS_HELP_STRING([--enable-ecmult-static-precomputation],[enable precomputed ecmult table for signing [default=auto]]),

     [use_ecmult_static_precomputation=$enableval],
     [use_ecmult_static_precomputation=auto])
 
 AC_ARG_ENABLE(module_ecdh,
     [use_ecmult_static_precomputation=$enableval],
     [use_ecmult_static_precomputation=auto])
 
 AC_ARG_ENABLE(module_ecdh,

-    AS_HELP_STRING([--enable-module-ecdh],[enable ECDH shared secret computation (experimental)]),
+    AS_HELP_STRING([--enable-module-ecdh],[enable ECDH shared secret computation]),

     [enable_module_ecdh=$enableval],
     [enable_module_ecdh=no])
 
 AC_ARG_ENABLE(module_recovery,
     [enable_module_ecdh=$enableval],
     [enable_module_ecdh=no])
 
 AC_ARG_ENABLE(module_recovery,

-    AS_HELP_STRING([--enable-module-recovery],[enable ECDSA pubkey recovery module (default is no)]),
+    AS_HELP_STRING([--enable-module-recovery],[enable ECDSA pubkey recovery module [default=no]]),

     [enable_module_recovery=$enableval],
     [enable_module_recovery=no])
 
     [enable_module_recovery=$enableval],
     [enable_module_recovery=no])
 

-AC_ARG_ENABLE(jni,
-    AS_HELP_STRING([--enable-jni],[enable libsecp256k1_jni (default is no)]),
-    [use_jni=$enableval],
-    [use_jni=no])
-
-AC_ARG_WITH([field], [AS_HELP_STRING([--with-field=64bit|32bit|auto],
-[Specify Field Implementation. Default is auto])],[req_field=$withval], [req_field=auto])
-
-AC_ARG_WITH([bignum], [AS_HELP_STRING([--with-bignum=gmp|no|auto],
-[Specify Bignum Implementation. Default is auto])],[req_bignum=$withval], [req_bignum=auto])
-
-AC_ARG_WITH([scalar], [AS_HELP_STRING([--with-scalar=64bit|32bit|auto],
-[Specify scalar implementation. Default is auto])],[req_scalar=$withval], [req_scalar=auto])
-
-AC_ARG_WITH([asm], [AS_HELP_STRING([--with-asm=x86_64|arm|no|auto]
-[Specify assembly optimizations to use. Default is auto (experimental: arm)])],[req_asm=$withval], [req_asm=auto])
-
-AC_CHECK_TYPES([__int128])
-
-AC_MSG_CHECKING([for __builtin_expect])
-AC_COMPILE_IFELSE([AC_LANG_SOURCE([[void myfunc() {__builtin_expect(0,0);}]])],
-    [ AC_MSG_RESULT([yes]);AC_DEFINE(HAVE_BUILTIN_EXPECT,1,[Define this symbol if __builtin_expect is available]) ],
-    [ AC_MSG_RESULT([no])
-    ])
-
-if test x"$enable_coverage" = x"yes"; then
-    AC_DEFINE(COVERAGE, 1, [Define this symbol to compile out all VERIFY code])
-    CFLAGS="$CFLAGS -O0 --coverage"
-    LDFLAGS="--coverage"
+AC_ARG_ENABLE(module_extrakeys,
+    AS_HELP_STRING([--enable-module-extrakeys],[enable extrakeys module (experimental)]),
+    [enable_module_extrakeys=$enableval],
+    [enable_module_extrakeys=no])
+
+AC_ARG_ENABLE(module_schnorrsig,
+    AS_HELP_STRING([--enable-module-schnorrsig],[enable schnorrsig module (experimental)]),
+    [enable_module_schnorrsig=$enableval],
+    [enable_module_schnorrsig=no])
+
+AC_ARG_ENABLE(external_default_callbacks,
+    AS_HELP_STRING([--enable-external-default-callbacks],[enable external default callback functions [default=no]]),
+    [use_external_default_callbacks=$enableval],
+    [use_external_default_callbacks=no])
+
+# Test-only override of the (autodetected by the C code) "widemul" setting.
+# Legal values are int64 (for [u]int64_t), int128 (for [unsigned] __int128), and auto (the default).
+AC_ARG_WITH([test-override-wide-multiply], [] ,[set_widemul=$withval], [set_widemul=auto])
+
+AC_ARG_WITH([asm], [AS_HELP_STRING([--with-asm=x86_64|arm|no|auto],
+[assembly optimizations to use (experimental: arm) [default=auto]])],[req_asm=$withval], [req_asm=auto])
+
+AC_ARG_WITH([ecmult-window], [AS_HELP_STRING([--with-ecmult-window=SIZE|auto],
+[window size for ecmult precomputation for verification, specified as integer in range [2..24].]
+[Larger values result in possibly better performance at the cost of an exponentially larger precomputed table.]
+[The table will store 2^(SIZE-1) * 64 bytes of data but can be larger in memory due to platform-specific padding and alignment.]
+["auto" is a reasonable setting for desktop machines (currently 15). [default=auto]]
+)],
+[req_ecmult_window=$withval], [req_ecmult_window=auto])
+
+AC_ARG_WITH([ecmult-gen-precision], [AS_HELP_STRING([--with-ecmult-gen-precision=2|4|8|auto],
+[Precision bits to tune the precomputed table size for signing.]
+[The size of the table is 32kB for 2 bits, 64kB for 4 bits, 512kB for 8 bits of precision.]
+[A larger table size usually results in possible faster signing.]
+["auto" is a reasonable setting for desktop machines (currently 4). [default=auto]]
+)],
+[req_ecmult_gen_precision=$withval], [req_ecmult_gen_precision=auto])
+
+AC_ARG_WITH([valgrind], [AS_HELP_STRING([--with-valgrind=yes|no|auto],
+[Build with extra checks for running inside Valgrind [default=auto]]
+)],
+[req_valgrind=$withval], [req_valgrind=auto])
+
+###
+### Handle config options (except for modules)
+###
+
+if test x"$req_valgrind" = x"no"; then
+  enable_valgrind=no

 else
 else

-    CFLAGS="$CFLAGS -O3"
-fi
-
-if test x"$use_ecmult_static_precomputation" != x"no"; then
-  save_cross_compiling=$cross_compiling
-  cross_compiling=no
-  TEMP_CC="$CC"
-  CC="$CC_FOR_BUILD"
-  AC_MSG_CHECKING([native compiler: ${CC_FOR_BUILD}])
-  AC_RUN_IFELSE(
-    [AC_LANG_PROGRAM([], [return 0])],
-    [working_native_cc=yes],
-    [working_native_cc=no],[dnl])
-  CC="$TEMP_CC"
-  cross_compiling=$save_cross_compiling
-
-  if test x"$working_native_cc" = x"no"; then
-    set_precomp=no
-    if test x"$use_ecmult_static_precomputation" = x"yes";  then
-      AC_MSG_ERROR([${CC_FOR_BUILD} does not produce working binaries. Please set CC_FOR_BUILD])
-    else
-      AC_MSG_RESULT([${CC_FOR_BUILD} does not produce working binaries. Please set CC_FOR_BUILD])
+  SECP_VALGRIND_CHECK
+  if test x"$has_valgrind" != x"yes"; then
+    if test x"$req_valgrind" = x"yes"; then
+      AC_MSG_ERROR([Valgrind support explicitly requested but valgrind/memcheck.h header not available])

     fi
     fi

+    enable_valgrind=no

   else
   else

-    AC_MSG_RESULT([ok])
-    set_precomp=yes
+    enable_valgrind=yes

   fi
   fi

+fi
+AM_CONDITIONAL([VALGRIND_ENABLED],[test "$enable_valgrind" = "yes"])
+
+if test x"$enable_coverage" = x"yes"; then
+    AC_DEFINE(COVERAGE, 1, [Define this symbol to compile out all VERIFY code])
+    SECP_CFLAGS="-O0 --coverage $SECP_CFLAGS"
+    LDFLAGS="--coverage $LDFLAGS"

 else
 else

-  set_precomp=no
+    # Most likely the CFLAGS already contain -O2 because that is autoconf's default.
+    # We still add it here because passing it twice is not an issue, and handling
+    # this case would just add unnecessary complexity (see #896).
+    SECP_CFLAGS="-O2 $SECP_CFLAGS"
+    SECP_CFLAGS_FOR_BUILD="-O2 $SECP_CFLAGS_FOR_BUILD"

 fi
 
 if test x"$req_asm" = x"auto"; then
 fi
 
 if test x"$req_asm" = x"auto"; then


@@ -222,90 +252,7 @@ else
   esac
 fi
 
   esac
 fi
 

-if test x"$req_field" = x"auto"; then
-  if test x"set_asm" = x"x86_64"; then
-    set_field=64bit
-  fi
-  if test x"$set_field" = x; then
-    SECP_INT128_CHECK
-    if test x"$has_int128" = x"yes"; then
-      set_field=64bit
-    fi
-  fi
-  if test x"$set_field" = x; then
-    set_field=32bit
-  fi
-else
-  set_field=$req_field
-  case $set_field in
-  64bit)
-    if test x"$set_asm" != x"x86_64"; then
-      SECP_INT128_CHECK
-      if test x"$has_int128" != x"yes"; then
-        AC_MSG_ERROR([64bit field explicitly requested but neither __int128 support or x86_64 assembly available])
-      fi
-    fi
-    ;;
-  32bit)
-    ;;
-  *)
-    AC_MSG_ERROR([invalid field implementation selection])
-    ;;
-  esac
-fi
-
-if test x"$req_scalar" = x"auto"; then
-  SECP_INT128_CHECK
-  if test x"$has_int128" = x"yes"; then
-    set_scalar=64bit
-  fi
-  if test x"$set_scalar" = x; then
-    set_scalar=32bit
-  fi
-else
-  set_scalar=$req_scalar
-  case $set_scalar in
-  64bit)
-    SECP_INT128_CHECK
-    if test x"$has_int128" != x"yes"; then
-      AC_MSG_ERROR([64bit scalar explicitly requested but __int128 support not available])
-    fi
-    ;;
-  32bit)
-    ;;
-  *)
-    AC_MSG_ERROR([invalid scalar implementation selected])
-    ;;
-  esac
-fi
-
-if test x"$req_bignum" = x"auto"; then
-  SECP_GMP_CHECK
-  if test x"$has_gmp" = x"yes"; then
-    set_bignum=gmp
-  fi
-
-  if test x"$set_bignum" = x; then
-    set_bignum=no
-  fi
-else
-  set_bignum=$req_bignum
-  case $set_bignum in
-  gmp)
-    SECP_GMP_CHECK
-    if test x"$has_gmp" != x"yes"; then
-      AC_MSG_ERROR([gmp bignum explicitly requested but libgmp not available])
-    fi
-    ;;
-  no)
-    ;;
-  *)
-    AC_MSG_ERROR([invalid bignum implementation selection])
-    ;;
-  esac
-fi
-
-# select assembly optimization
+# Select assembly optimization

 use_external_asm=no
 
 case $set_asm in
 use_external_asm=no
 
 case $set_asm in


@@ -322,56 +269,70 @@ no)
   ;;
 esac
 
   ;;
 esac
 

-# select field implementation
-case $set_field in
-64bit)
-  AC_DEFINE(USE_FIELD_5X52, 1, [Define this symbol to use the FIELD_5X52 implementation])
+if test x"$use_external_asm" = x"yes"; then
+  AC_DEFINE(USE_EXTERNAL_ASM, 1, [Define this symbol if an external (non-inline) assembly implementation is used])
+fi
+
+
+# Select wide multiplication implementation
+case $set_widemul in
+int128)
+  AC_DEFINE(USE_FORCE_WIDEMUL_INT128, 1, [Define this symbol to force the use of the (unsigned) __int128 based wide multiplication implementation])

   ;;
   ;;

-32bit)
-  AC_DEFINE(USE_FIELD_10X26, 1, [Define this symbol to use the FIELD_10X26 implementation])
+int64)
+  AC_DEFINE(USE_FORCE_WIDEMUL_INT64, 1, [Define this symbol to force the use of the (u)int64_t based wide multiplication implementation])
+  ;;
+auto)

   ;;
 *)
   ;;
 *)

-  AC_MSG_ERROR([invalid field implementation])
+  AC_MSG_ERROR([invalid wide multiplication implementation])

   ;;
 esac
 
   ;;
 esac
 

-# select bignum implementation
-case $set_bignum in
-gmp)
-  AC_DEFINE(HAVE_LIBGMP, 1, [Define this symbol if libgmp is installed])
-  AC_DEFINE(USE_NUM_GMP, 1, [Define this symbol to use the gmp implementation for num])
-  AC_DEFINE(USE_FIELD_INV_NUM, 1, [Define this symbol to use the num-based field inverse implementation])
-  AC_DEFINE(USE_SCALAR_INV_NUM, 1, [Define this symbol to use the num-based scalar inverse implementation])
-  ;;
-no)
-  AC_DEFINE(USE_NUM_NONE, 1, [Define this symbol to use no num implementation])
-  AC_DEFINE(USE_FIELD_INV_BUILTIN, 1, [Define this symbol to use the native field inverse implementation])
-  AC_DEFINE(USE_SCALAR_INV_BUILTIN, 1, [Define this symbol to use the native scalar inverse implementation])
+# Set ecmult window size
+if test x"$req_ecmult_window" = x"auto"; then
+  set_ecmult_window=15
+else
+  set_ecmult_window=$req_ecmult_window
+fi
+
+error_window_size=['window size for ecmult precomputation not an integer in range [2..24] or "auto"']
+case $set_ecmult_window in
+''|*[[!0-9]]*)
+  # no valid integer
+  AC_MSG_ERROR($error_window_size)

   ;;
 *)
   ;;
 *)

-  AC_MSG_ERROR([invalid bignum implementation])
+  if test "$set_ecmult_window" -lt 2 -o "$set_ecmult_window" -gt 24 ; then
+    # not in range
+    AC_MSG_ERROR($error_window_size)
+  fi
+  AC_DEFINE_UNQUOTED(ECMULT_WINDOW_SIZE, $set_ecmult_window, [Set window size for ecmult precomputation])

   ;;
 esac
 
   ;;
 esac
 

-#select scalar implementation
-case $set_scalar in
-64bit)
-  AC_DEFINE(USE_SCALAR_4X64, 1, [Define this symbol to use the 4x64 scalar implementation])
-  ;;
-32bit)
-  AC_DEFINE(USE_SCALAR_8X32, 1, [Define this symbol to use the 8x32 scalar implementation])
+# Set ecmult gen precision
+if test x"$req_ecmult_gen_precision" = x"auto"; then
+  set_ecmult_gen_precision=4
+else
+  set_ecmult_gen_precision=$req_ecmult_gen_precision
+fi
+
+case $set_ecmult_gen_precision in
+2|4|8)
+  AC_DEFINE_UNQUOTED(ECMULT_GEN_PREC_BITS, $set_ecmult_gen_precision, [Set ecmult gen precision bits])

   ;;
 *)
   ;;
 *)

-  AC_MSG_ERROR([invalid scalar implementation])
+  AC_MSG_ERROR(['ecmult gen precision not 2, 4, 8 or "auto"'])

   ;;
 esac
 
 if test x"$use_tests" = x"yes"; then
   SECP_OPENSSL_CHECK
   ;;
 esac
 
 if test x"$use_tests" = x"yes"; then
   SECP_OPENSSL_CHECK

-  if test x"$has_openssl_ec" = x"yes"; then
-    if test x"$enable_openssl_tests" != x"no"; then
+  if test x"$enable_openssl_tests" != x"no" && test x"$has_openssl_ec" = x"yes"; then
+      enable_openssl_tests=yes

       AC_DEFINE(ENABLE_OPENSSL_TESTS, 1, [Define this symbol if OpenSSL EC functions are available])
       AC_DEFINE(ENABLE_OPENSSL_TESTS, 1, [Define this symbol if OpenSSL EC functions are available])

-      SECP_TEST_INCLUDES="$SSL_CFLAGS $CRYPTO_CFLAGS"
+      SECP_TEST_INCLUDES="$SSL_CFLAGS $CRYPTO_CFLAGS $CRYPTO_CPPFLAGS"

       SECP_TEST_LIBS="$CRYPTO_LIBS"
 
       case $host in
       SECP_TEST_LIBS="$CRYPTO_LIBS"
 
       case $host in


@@ -379,54 +340,101 @@ if test x"$use_tests" = x"yes"; then
         SECP_TEST_LIBS="$SECP_TEST_LIBS -lgdi32"
         ;;
       esac
         SECP_TEST_LIBS="$SECP_TEST_LIBS -lgdi32"
         ;;
       esac

-    fi

   else
     if test x"$enable_openssl_tests" = x"yes"; then
       AC_MSG_ERROR([OpenSSL tests requested but OpenSSL with EC support is not available])
     fi
   else
     if test x"$enable_openssl_tests" = x"yes"; then
       AC_MSG_ERROR([OpenSSL tests requested but OpenSSL with EC support is not available])
     fi

+    enable_openssl_tests=no

   fi
 else
   if test x"$enable_openssl_tests" = x"yes"; then
     AC_MSG_ERROR([OpenSSL tests requested but tests are not enabled])
   fi
   fi
 else
   if test x"$enable_openssl_tests" = x"yes"; then
     AC_MSG_ERROR([OpenSSL tests requested but tests are not enabled])
   fi

+  enable_openssl_tests=no

 fi
 
 fi
 

-if test x"$use_jni" != x"no"; then
-  AX_JNI_INCLUDE_DIR
-  have_jni_dependencies=yes
-  if test x"$enable_module_ecdh" = x"no"; then
-    have_jni_dependencies=no
-  fi
-  if test "x$JNI_INCLUDE_DIRS" = "x"; then
-    have_jni_dependencies=no
-  fi
-  if test "x$have_jni_dependencies" = "xno"; then
-    if test x"$use_jni" = x"yes"; then
-      AC_MSG_ERROR([jni support explicitly requested but headers/dependencies were not found. Enable ECDH and try again.])
+if test x"$enable_valgrind" = x"yes"; then
+  SECP_INCLUDES="$SECP_INCLUDES $VALGRIND_CPPFLAGS"
+fi
+
+# Add -Werror and similar flags passed from the outside (for testing, e.g., in CI)
+SECP_CFLAGS="$SECP_CFLAGS $WERROR_CFLAGS"
+
+# Handle static precomputation (after everything which modifies CFLAGS and friends)
+if test x"$use_ecmult_static_precomputation" != x"no"; then
+  if test x"$cross_compiling" = x"no"; then
+    set_precomp=yes
+    if test x"${CC_FOR_BUILD+x}${CFLAGS_FOR_BUILD+x}${CPPFLAGS_FOR_BUILD+x}${LDFLAGS_FOR_BUILD+x}" != x; then
+      AC_MSG_WARN([CC_FOR_BUILD, CFLAGS_FOR_BUILD, CPPFLAGS_FOR_BUILD, and/or LDFLAGS_FOR_BUILD is set but ignored because we are not cross-compiling.])

     fi
     fi

-    AC_MSG_WARN([jni headers/dependencies not found. jni support disabled])
-    use_jni=no
+    # If we're not cross-compiling, simply use the same compiler for building the static precompation code.
+    CC_FOR_BUILD="$CC"
+    CPPFLAGS_FOR_BUILD="$CPPFLAGS"
+    SECP_CFLAGS_FOR_BUILD="$SECP_CFLAGS"
+    CFLAGS_FOR_BUILD="$CFLAGS"
+    LDFLAGS_FOR_BUILD="$LDFLAGS"

   else
   else

-    use_jni=yes
-    for JNI_INCLUDE_DIR in $JNI_INCLUDE_DIRS; do
-      JNI_INCLUDES="$JNI_INCLUDES -I$JNI_INCLUDE_DIR"
-    done
+    AX_PROG_CC_FOR_BUILD
+
+    # Temporarily switch to an environment for the native compiler
+    save_cross_compiling=$cross_compiling
+    cross_compiling=no
+    SAVE_CC="$CC"
+    CC="$CC_FOR_BUILD"
+    SAVE_CPPFLAGS="$CPPFLAGS"
+    CPPFLAGS="$CPPFLAGS_FOR_BUILD"
+    SAVE_CFLAGS="$CFLAGS"
+    CFLAGS="$CFLAGS_FOR_BUILD"
+    SAVE_LDFLAGS="$LDFLAGS"
+    LDFLAGS="$LDFLAGS_FOR_BUILD"
+
+    SECP_TRY_APPEND_DEFAULT_CFLAGS(SECP_CFLAGS_FOR_BUILD)
+
+    AC_MSG_CHECKING([for working native compiler: ${CC_FOR_BUILD}])
+    AC_RUN_IFELSE(
+      [AC_LANG_PROGRAM([], [])],
+      [working_native_cc=yes],
+      [working_native_cc=no],[:])
+
+    # Restore the environment
+    cross_compiling=$save_cross_compiling
+    CC="$SAVE_CC"
+    CPPFLAGS="$SAVE_CPPFLAGS"
+    CFLAGS="$SAVE_CFLAGS"
+    LDFLAGS="$SAVE_LDFLAGS"
+
+    if test x"$working_native_cc" = x"no"; then
+      AC_MSG_RESULT([no])
+      set_precomp=no
+      m4_define([please_set_for_build], [Please set CC_FOR_BUILD, CPPFLAGS_FOR_BUILD, CFLAGS_FOR_BUILD, and/or LDFLAGS_FOR_BUILD.])
+      if test x"$use_ecmult_static_precomputation" = x"yes";  then
+        AC_MSG_ERROR([native compiler ${CC_FOR_BUILD} does not produce working binaries. please_set_for_build])
+      else
+        AC_MSG_WARN([Disabling statically generated ecmult table because the native compiler ${CC_FOR_BUILD} does not produce working binaries. please_set_for_build])
+      fi
+    else
+      AC_MSG_RESULT([yes])
+      set_precomp=yes
+    fi

   fi
   fi

-fi

 
 

-if test x"$set_bignum" = x"gmp"; then
-  SECP_LIBS="$SECP_LIBS $GMP_LIBS"
-  SECP_INCLUDES="$SECP_INCLUDES $GMP_CPPFLAGS"
-fi
-
-if test x"$use_endomorphism" = x"yes"; then
-  AC_DEFINE(USE_ENDOMORPHISM, 1, [Define this symbol to use endomorphism optimization])
+  AC_SUBST(CC_FOR_BUILD)
+  AC_SUBST(CPPFLAGS_FOR_BUILD)
+  AC_SUBST(SECP_CFLAGS_FOR_BUILD)
+  AC_SUBST(CFLAGS_FOR_BUILD)
+  AC_SUBST(LDFLAGS_FOR_BUILD)
+else
+  set_precomp=no

 fi
 
 if test x"$set_precomp" = x"yes"; then
   AC_DEFINE(USE_ECMULT_STATIC_PRECOMPUTATION, 1, [Define this symbol to use a statically generated ecmult table])
 fi
 
 fi
 
 if test x"$set_precomp" = x"yes"; then
   AC_DEFINE(USE_ECMULT_STATIC_PRECOMPUTATION, 1, [Define this symbol to use a statically generated ecmult table])
 fi
 

+###
+### Handle module options
+###
+

 if test x"$enable_module_ecdh" = x"yes"; then
   AC_DEFINE(ENABLE_MODULE_ECDH, 1, [Define this symbol to enable the ECDH module])
 fi
 if test x"$enable_module_ecdh" = x"yes"; then
   AC_DEFINE(ENABLE_MODULE_ECDH, 1, [Define this symbol to enable the ECDH module])
 fi


@@ -435,46 +443,55 @@ if test x"$enable_module_recovery" = x"yes"; then
   AC_DEFINE(ENABLE_MODULE_RECOVERY, 1, [Define this symbol to enable the ECDSA pubkey recovery module])
 fi
 
   AC_DEFINE(ENABLE_MODULE_RECOVERY, 1, [Define this symbol to enable the ECDSA pubkey recovery module])
 fi
 

-AC_C_BIGENDIAN()
+if test x"$enable_module_schnorrsig" = x"yes"; then
+  AC_DEFINE(ENABLE_MODULE_SCHNORRSIG, 1, [Define this symbol to enable the schnorrsig module])
+  enable_module_extrakeys=yes
+fi

 
 

-if test x"$use_external_asm" = x"yes"; then
-  AC_DEFINE(USE_EXTERNAL_ASM, 1, [Define this symbol if an external (non-inline) assembly implementation is used])
+# Test if extrakeys is set after the schnorrsig module to allow the schnorrsig
+# module to set enable_module_extrakeys=yes
+if test x"$enable_module_extrakeys" = x"yes"; then
+  AC_DEFINE(ENABLE_MODULE_EXTRAKEYS, 1, [Define this symbol to enable the extrakeys module])
+fi
+
+if test x"$use_external_default_callbacks" = x"yes"; then
+  AC_DEFINE(USE_EXTERNAL_DEFAULT_CALLBACKS, 1, [Define this symbol if an external implementation of the default callbacks is used])

 fi
 
 fi
 

-AC_MSG_NOTICE([Using static precomputation: $set_precomp])
-AC_MSG_NOTICE([Using assembly optimizations: $set_asm])
-AC_MSG_NOTICE([Using field implementation: $set_field])
-AC_MSG_NOTICE([Using bignum implementation: $set_bignum])
-AC_MSG_NOTICE([Using scalar implementation: $set_scalar])
-AC_MSG_NOTICE([Using endomorphism optimizations: $use_endomorphism])
-AC_MSG_NOTICE([Building benchmarks: $use_benchmark])
-AC_MSG_NOTICE([Building for coverage analysis: $enable_coverage])
-AC_MSG_NOTICE([Building ECDH module: $enable_module_ecdh])
-AC_MSG_NOTICE([Building ECDSA pubkey recovery module: $enable_module_recovery])
-AC_MSG_NOTICE([Using jni: $use_jni])
+###
+### Check for --enable-experimental if necessary
+###

 
 if test x"$enable_experimental" = x"yes"; then
   AC_MSG_NOTICE([******])
   AC_MSG_NOTICE([WARNING: experimental build])
   AC_MSG_NOTICE([Experimental features do not have stable APIs or properties, and may not be safe for production use.])
 
 if test x"$enable_experimental" = x"yes"; then
   AC_MSG_NOTICE([******])
   AC_MSG_NOTICE([WARNING: experimental build])
   AC_MSG_NOTICE([Experimental features do not have stable APIs or properties, and may not be safe for production use.])

-  AC_MSG_NOTICE([Building ECDH module: $enable_module_ecdh])
+  AC_MSG_NOTICE([Building extrakeys module: $enable_module_extrakeys])
+  AC_MSG_NOTICE([Building schnorrsig module: $enable_module_schnorrsig])

   AC_MSG_NOTICE([******])
 else
   AC_MSG_NOTICE([******])
 else

-  if test x"$enable_module_ecdh" = x"yes"; then
-    AC_MSG_ERROR([ECDH module is experimental. Use --enable-experimental to allow.])
+  if test x"$enable_module_extrakeys" = x"yes"; then
+    AC_MSG_ERROR([extrakeys module is experimental. Use --enable-experimental to allow.])
+  fi
+  if test x"$enable_module_schnorrsig" = x"yes"; then
+    AC_MSG_ERROR([schnorrsig module is experimental. Use --enable-experimental to allow.])

   fi
   if test x"$set_asm" = x"arm"; then
     AC_MSG_ERROR([ARM assembly optimization is experimental. Use --enable-experimental to allow.])
   fi
 fi
 
   fi
   if test x"$set_asm" = x"arm"; then
     AC_MSG_ERROR([ARM assembly optimization is experimental. Use --enable-experimental to allow.])
   fi
 fi
 

+###
+### Generate output
+###
+

 AC_CONFIG_HEADERS([src/libsecp256k1-config.h])
 AC_CONFIG_FILES([Makefile libsecp256k1.pc])
 AC_CONFIG_HEADERS([src/libsecp256k1-config.h])
 AC_CONFIG_FILES([Makefile libsecp256k1.pc])

-AC_SUBST(JNI_INCLUDES)

 AC_SUBST(SECP_INCLUDES)
 AC_SUBST(SECP_LIBS)
 AC_SUBST(SECP_TEST_LIBS)
 AC_SUBST(SECP_TEST_INCLUDES)
 AC_SUBST(SECP_INCLUDES)
 AC_SUBST(SECP_LIBS)
 AC_SUBST(SECP_TEST_LIBS)
 AC_SUBST(SECP_TEST_INCLUDES)

+AC_SUBST(SECP_CFLAGS)

 AM_CONDITIONAL([ENABLE_COVERAGE], [test x"$enable_coverage" = x"yes"])
 AM_CONDITIONAL([USE_TESTS], [test x"$use_tests" != x"no"])
 AM_CONDITIONAL([USE_EXHAUSTIVE_TESTS], [test x"$use_exhaustive_tests" != x"no"])
 AM_CONDITIONAL([ENABLE_COVERAGE], [test x"$enable_coverage" = x"yes"])
 AM_CONDITIONAL([USE_TESTS], [test x"$use_tests" != x"no"])
 AM_CONDITIONAL([USE_EXHAUSTIVE_TESTS], [test x"$use_exhaustive_tests" != x"no"])


@@ -482,13 +499,50 @@ AM_CONDITIONAL([USE_BENCHMARK], [test x"$use_benchmark" = x"yes"])
 AM_CONDITIONAL([USE_ECMULT_STATIC_PRECOMPUTATION], [test x"$set_precomp" = x"yes"])
 AM_CONDITIONAL([ENABLE_MODULE_ECDH], [test x"$enable_module_ecdh" = x"yes"])
 AM_CONDITIONAL([ENABLE_MODULE_RECOVERY], [test x"$enable_module_recovery" = x"yes"])
 AM_CONDITIONAL([USE_ECMULT_STATIC_PRECOMPUTATION], [test x"$set_precomp" = x"yes"])
 AM_CONDITIONAL([ENABLE_MODULE_ECDH], [test x"$enable_module_ecdh" = x"yes"])
 AM_CONDITIONAL([ENABLE_MODULE_RECOVERY], [test x"$enable_module_recovery" = x"yes"])

-AM_CONDITIONAL([USE_JNI], [test x"$use_jni" == x"yes"])
+AM_CONDITIONAL([ENABLE_MODULE_EXTRAKEYS], [test x"$enable_module_extrakeys" = x"yes"])
+AM_CONDITIONAL([ENABLE_MODULE_SCHNORRSIG], [test x"$enable_module_schnorrsig" = x"yes"])

 AM_CONDITIONAL([USE_EXTERNAL_ASM], [test x"$use_external_asm" = x"yes"])
 AM_CONDITIONAL([USE_ASM_ARM], [test x"$set_asm" = x"arm"])
 
 AM_CONDITIONAL([USE_EXTERNAL_ASM], [test x"$use_external_asm" = x"yes"])
 AM_CONDITIONAL([USE_ASM_ARM], [test x"$set_asm" = x"arm"])
 

-dnl make sure nothing new is exported so that we don't break the cache
+# Make sure nothing new is exported so that we don't break the cache.

 PKGCONFIG_PATH_TEMP="$PKG_CONFIG_PATH"
 unset PKG_CONFIG_PATH
 PKG_CONFIG_PATH="$PKGCONFIG_PATH_TEMP"
 
 AC_OUTPUT
 PKGCONFIG_PATH_TEMP="$PKG_CONFIG_PATH"
 unset PKG_CONFIG_PATH
 PKG_CONFIG_PATH="$PKGCONFIG_PATH_TEMP"
 
 AC_OUTPUT

+
+echo
+echo "Build Options:"
+echo "  with ecmult precomp     = $set_precomp"
+echo "  with external callbacks = $use_external_default_callbacks"
+echo "  with benchmarks         = $use_benchmark"
+echo "  with tests              = $use_tests"
+echo "  with openssl tests      = $enable_openssl_tests"
+echo "  with coverage           = $enable_coverage"
+echo "  module ecdh             = $enable_module_ecdh"
+echo "  module recovery         = $enable_module_recovery"
+echo "  module extrakeys        = $enable_module_extrakeys"
+echo "  module schnorrsig       = $enable_module_schnorrsig"
+echo
+echo "  asm                     = $set_asm"
+echo "  ecmult window size      = $set_ecmult_window"
+echo "  ecmult gen prec. bits   = $set_ecmult_gen_precision"
+# Hide test-only options unless they're used.
+if test x"$set_widemul" != xauto; then
+echo "  wide multiplication     = $set_widemul"
+fi
+echo
+echo "  valgrind                = $enable_valgrind"
+echo "  CC                      = $CC"
+echo "  CPPFLAGS                = $CPPFLAGS"
+echo "  SECP_CFLAGS             = $SECP_CFLAGS"
+echo "  CFLAGS                  = $CFLAGS"
+echo "  LDFLAGS                 = $LDFLAGS"
+echo
+if test x"$set_precomp" = x"yes"; then
+echo "  CC_FOR_BUILD            = $CC_FOR_BUILD"
+echo "  CPPFLAGS_FOR_BUILD      = $CPPFLAGS_FOR_BUILD"
+echo "  SECP_CFLAGS_FOR_BUILD   = $SECP_CFLAGS_FOR_BUILD"
+echo "  CFLAGS_FOR_BUILD        = $CFLAGS_FOR_BUILD"
+echo "  LDFLAGS_FOR_BUILD       = $LDFLAGS_FOR_BUILD"
+fi