AH_BOTTOM([#endif /*LIBSECP256K1_CONFIG_H*/])
AM_INIT_AUTOMAKE([foreign subdir-objects])
-# Set -g if CFLAGS are not already set, which matches the default autoconf
-# behavior (see PROG_CC in the Autoconf manual) with the exception that we don't
-# set -O2 here because we set it in any case (see further down).
-: ${CFLAGS="-g"}
LT_INIT
-dnl make the compilation flags quiet unless V=1 is used
+# Make the compilation flags quiet unless V=1 is used.
m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
PKG_PROG_PKG_CONFIG
AC_PATH_TOOL(AR, ar)
AC_PATH_TOOL(RANLIB, ranlib)
AC_PATH_TOOL(STRIP, strip)
-AX_PROG_CC_FOR_BUILD
+# Save definition of AC_PROG_CC because AM_PROG_CC_C_O in automake<=1.13 will
+# redefine AC_PROG_CC to exit with an error, which avoids the user calling it
+# accidently and screwing up the effect of AM_PROG_CC_C_O. However, we'll need
+# AC_PROG_CC later on in AX_PROG_CC_FOR_BUILD, where its usage is fine, and
+# we'll carefully make sure not to call AC_PROG_CC anywhere else.
+m4_copy([AC_PROG_CC], [saved_AC_PROG_CC])
AM_PROG_CC_C_O
+# Restore AC_PROG_CC
+m4_rename_force([saved_AC_PROG_CC], [AC_PROG_CC])
AC_PROG_CC_C89
if test x"$ac_cv_prog_cc_c89" = x"no"; then
case $host_os in
*darwin*)
if test x$cross_compiling != xyes; then
- AC_PATH_PROG([BREW],brew,)
- if test x$BREW != x; then
- dnl These Homebrew packages may be keg-only, meaning that they won't be found
- dnl in expected paths because they may conflict with system files. Ask
- dnl Homebrew where each one is located, then adjust paths accordingly.
-
+ AC_CHECK_PROG([BREW], brew, brew)
+ if test x$BREW = xbrew; then
+ # These Homebrew packages may be keg-only, meaning that they won't be found
+ # in expected paths because they may conflict with system files. Ask
+ # Homebrew where each one is located, then adjust paths accordingly.
openssl_prefix=`$BREW --prefix openssl 2>/dev/null`
- gmp_prefix=`$BREW --prefix gmp 2>/dev/null`
+ valgrind_prefix=`$BREW --prefix valgrind 2>/dev/null`
if test x$openssl_prefix != x; then
PKG_CONFIG_PATH="$openssl_prefix/lib/pkgconfig:$PKG_CONFIG_PATH"
export PKG_CONFIG_PATH
CRYPTO_CPPFLAGS="-I$openssl_prefix/include"
fi
- if test x$gmp_prefix != x; then
- GMP_CPPFLAGS="-I$gmp_prefix/include"
- GMP_LIBS="-L$gmp_prefix/lib"
+ if test x$valgrind_prefix != x; then
+ VALGRIND_CPPFLAGS="-I$valgrind_prefix/include"
fi
else
- AC_PATH_PROG([PORT],port,)
- dnl if homebrew isn't installed and macports is, add the macports default paths
- dnl as a last resort.
- if test x$PORT != x; then
+ AC_CHECK_PROG([PORT], port, port)
+ # If homebrew isn't installed and macports is, add the macports default paths
+ # as a last resort.
+ if test x$PORT = xport; then
CPPFLAGS="$CPPFLAGS -isystem /opt/local/include"
LDFLAGS="$LDFLAGS -L/opt/local/lib"
fi
;;
esac
-CFLAGS="-W $CFLAGS"
-
-warn_CFLAGS="-std=c89 -pedantic -Wall -Wextra -Wcast-align -Wnested-externs -Wshadow -Wstrict-prototypes -Wundef -Wno-unused-function -Wno-long-long -Wno-overlength-strings"
-saved_CFLAGS="$CFLAGS"
-CFLAGS="$warn_CFLAGS $CFLAGS"
-AC_MSG_CHECKING([if ${CC} supports ${warn_CFLAGS}])
-AC_COMPILE_IFELSE([AC_LANG_SOURCE([[char foo;]])],
- [ AC_MSG_RESULT([yes]) ],
- [ AC_MSG_RESULT([no])
- CFLAGS="$saved_CFLAGS"
- ])
-
-saved_CFLAGS="$CFLAGS"
-CFLAGS="-fvisibility=hidden $CFLAGS"
-AC_MSG_CHECKING([if ${CC} supports -fvisibility=hidden])
-AC_COMPILE_IFELSE([AC_LANG_SOURCE([[char foo;]])],
- [ AC_MSG_RESULT([yes]) ],
- [ AC_MSG_RESULT([no])
- CFLAGS="$saved_CFLAGS"
- ])
+# Try if some desirable compiler flags are supported and append them to SECP_CFLAGS.
+#
+# These are our own flags, so we append them to our own SECP_CFLAGS variable (instead of CFLAGS) as
+# recommended in the automake manual (Section "Flag Variables Ordering"). CFLAGS belongs to the user
+# and we are not supposed to touch it. In the Makefile, we will need to ensure that SECP_CFLAGS
+# is prepended to CFLAGS when invoking the compiler so that the user always has the last word (flag).
+#
+# Another advantage of not touching CFLAGS is that the contents of CFLAGS will be picked up by
+# libtool for compiling helper executables. For example, when compiling for Windows, libtool will
+# generate entire wrapper executables (instead of simple wrapper scripts as on Unix) to ensure
+# proper operation of uninstalled programs linked by libtool against the uninstalled shared library.
+# These executables are compiled from C source file for which our flags may not be appropriate,
+# e.g., -std=c89 flag has lead to undesirable warnings in the past.
+#
+# TODO We should analogously not touch CPPFLAGS and LDFLAGS but currently there are no issues.
+AC_DEFUN([SECP_TRY_APPEND_DEFAULT_CFLAGS], [
+ # Try to append -Werror=unknown-warning-option to CFLAGS temporarily. Otherwise clang will
+ # not error out if it gets unknown warning flags and the checks here will always succeed
+ # no matter if clang knows the flag or not.
+ SECP_TRY_APPEND_DEFAULT_CFLAGS_saved_CFLAGS="$CFLAGS"
+ SECP_TRY_APPEND_CFLAGS([-Werror=unknown-warning-option], CFLAGS)
+
+ SECP_TRY_APPEND_CFLAGS([-std=c89 -pedantic -Wno-long-long -Wnested-externs -Wshadow -Wstrict-prototypes -Wundef], $1) # GCC >= 3.0, -Wlong-long is implied by -pedantic.
+ SECP_TRY_APPEND_CFLAGS([-Wno-overlength-strings], $1) # GCC >= 4.2, -Woverlength-strings is implied by -pedantic.
+ SECP_TRY_APPEND_CFLAGS([-Wall], $1) # GCC >= 2.95 and probably many other compilers
+ SECP_TRY_APPEND_CFLAGS([-Wno-unused-function], $1) # GCC >= 3.0, -Wunused-function is implied by -Wall.
+ SECP_TRY_APPEND_CFLAGS([-Wextra], $1) # GCC >= 3.4, this is the newer name of -W, which we don't use because older GCCs will warn about unused functions.
+ SECP_TRY_APPEND_CFLAGS([-Wcast-align], $1) # GCC >= 2.95
+ SECP_TRY_APPEND_CFLAGS([-Wcast-align=strict], $1) # GCC >= 8.0
+ SECP_TRY_APPEND_CFLAGS([-Wconditional-uninitialized], $1) # Clang >= 3.0 only
+ SECP_TRY_APPEND_CFLAGS([-fvisibility=hidden], $1) # GCC >= 4.0
+
+ CFLAGS="$SECP_TRY_APPEND_DEFAULT_CFLAGS_saved_CFLAGS"
+])
+SECP_TRY_APPEND_DEFAULT_CFLAGS(SECP_CFLAGS)
+
+###
+### Define config arguments
+###
AC_ARG_ENABLE(benchmark,
AS_HELP_STRING([--enable-benchmark],[compile benchmark [default=yes]]),
[use_ecmult_static_precomputation=auto])
AC_ARG_ENABLE(module_ecdh,
- AS_HELP_STRING([--enable-module-ecdh],[enable ECDH shared secret computation (experimental)]),
+ AS_HELP_STRING([--enable-module-ecdh],[enable ECDH shared secret computation]),
[enable_module_ecdh=$enableval],
[enable_module_ecdh=no])
[use_external_default_callbacks=$enableval],
[use_external_default_callbacks=no])
-dnl Test-only override of the (autodetected by the C code) "widemul" setting.
-dnl Legal values are int64 (for [u]int64_t), int128 (for [unsigned] __int128), and auto (the default).
+# Test-only override of the (autodetected by the C code) "widemul" setting.
+# Legal values are int64 (for [u]int64_t), int128 (for [unsigned] __int128), and auto (the default).
AC_ARG_WITH([test-override-wide-multiply], [] ,[set_widemul=$withval], [set_widemul=auto])
-AC_ARG_WITH([bignum], [AS_HELP_STRING([--with-bignum=gmp|no|auto],
-[bignum implementation to use [default=auto]])],[req_bignum=$withval], [req_bignum=auto])
-
AC_ARG_WITH([asm], [AS_HELP_STRING([--with-asm=x86_64|arm|no|auto],
[assembly optimizations to use (experimental: arm) [default=auto]])],[req_asm=$withval], [req_asm=auto])
)],
[req_valgrind=$withval], [req_valgrind=auto])
+###
+### Handle config options (except for modules)
+###
+
if test x"$req_valgrind" = x"no"; then
enable_valgrind=no
else
- AC_CHECK_HEADER([valgrind/memcheck.h], [enable_valgrind=yes], [
+ SECP_VALGRIND_CHECK
+ if test x"$has_valgrind" != x"yes"; then
if test x"$req_valgrind" = x"yes"; then
AC_MSG_ERROR([Valgrind support explicitly requested but valgrind/memcheck.h header not available])
fi
enable_valgrind=no
- ], [])
+ else
+ enable_valgrind=yes
+ fi
fi
AM_CONDITIONAL([VALGRIND_ENABLED],[test "$enable_valgrind" = "yes"])
if test x"$enable_coverage" = x"yes"; then
AC_DEFINE(COVERAGE, 1, [Define this symbol to compile out all VERIFY code])
- CFLAGS="-O0 --coverage $CFLAGS"
+ SECP_CFLAGS="-O0 --coverage $SECP_CFLAGS"
LDFLAGS="--coverage $LDFLAGS"
else
- CFLAGS="-O2 $CFLAGS"
-fi
-
-if test x"$use_ecmult_static_precomputation" != x"no"; then
- # Temporarily switch to an environment for the native compiler
- save_cross_compiling=$cross_compiling
- cross_compiling=no
- SAVE_CC="$CC"
- CC="$CC_FOR_BUILD"
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS_FOR_BUILD"
- SAVE_CPPFLAGS="$CPPFLAGS"
- CPPFLAGS="$CPPFLAGS_FOR_BUILD"
- SAVE_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS_FOR_BUILD"
-
- warn_CFLAGS_FOR_BUILD="-Wall -Wextra -Wno-unused-function"
- saved_CFLAGS="$CFLAGS"
- CFLAGS="$warn_CFLAGS_FOR_BUILD $CFLAGS"
- AC_MSG_CHECKING([if native ${CC_FOR_BUILD} supports ${warn_CFLAGS_FOR_BUILD}])
- AC_COMPILE_IFELSE([AC_LANG_SOURCE([[char foo;]])],
- [ AC_MSG_RESULT([yes]) ],
- [ AC_MSG_RESULT([no])
- CFLAGS="$saved_CFLAGS"
- ])
-
- AC_MSG_CHECKING([for working native compiler: ${CC_FOR_BUILD}])
- AC_RUN_IFELSE(
- [AC_LANG_PROGRAM([], [])],
- [working_native_cc=yes],
- [working_native_cc=no],[:])
-
- CFLAGS_FOR_BUILD="$CFLAGS"
-
- # Restore the environment
- cross_compiling=$save_cross_compiling
- CC="$SAVE_CC"
- CFLAGS="$SAVE_CFLAGS"
- CPPFLAGS="$SAVE_CPPFLAGS"
- LDFLAGS="$SAVE_LDFLAGS"
-
- if test x"$working_native_cc" = x"no"; then
- AC_MSG_RESULT([no])
- set_precomp=no
- m4_define([please_set_for_build], [Please set CC_FOR_BUILD, CFLAGS_FOR_BUILD, CPPFLAGS_FOR_BUILD, and/or LDFLAGS_FOR_BUILD.])
- if test x"$use_ecmult_static_precomputation" = x"yes"; then
- AC_MSG_ERROR([native compiler ${CC_FOR_BUILD} does not produce working binaries. please_set_for_build])
- else
- AC_MSG_WARN([Disabling statically generated ecmult table because the native compiler ${CC_FOR_BUILD} does not produce working binaries. please_set_for_build])
- fi
- else
- AC_MSG_RESULT([yes])
- set_precomp=yes
- fi
-else
- set_precomp=no
+ # Most likely the CFLAGS already contain -O2 because that is autoconf's default.
+ # We still add it here because passing it twice is not an issue, and handling
+ # this case would just add unnecessary complexity (see #896).
+ SECP_CFLAGS="-O2 $SECP_CFLAGS"
+ SECP_CFLAGS_FOR_BUILD="-O2 $SECP_CFLAGS_FOR_BUILD"
fi
if test x"$req_asm" = x"auto"; then
esac
fi
-if test x"$req_bignum" = x"auto"; then
- SECP_GMP_CHECK
- if test x"$has_gmp" = x"yes"; then
- set_bignum=gmp
- fi
-
- if test x"$set_bignum" = x; then
- set_bignum=no
- fi
-else
- set_bignum=$req_bignum
- case $set_bignum in
- gmp)
- SECP_GMP_CHECK
- if test x"$has_gmp" != x"yes"; then
- AC_MSG_ERROR([gmp bignum explicitly requested but libgmp not available])
- fi
- ;;
- no)
- ;;
- *)
- AC_MSG_ERROR([invalid bignum implementation selection])
- ;;
- esac
-fi
-
-# select assembly optimization
+# Select assembly optimization
use_external_asm=no
case $set_asm in
;;
esac
-# select wide multiplication implementation
+if test x"$use_external_asm" = x"yes"; then
+ AC_DEFINE(USE_EXTERNAL_ASM, 1, [Define this symbol if an external (non-inline) assembly implementation is used])
+fi
+
+
+# Select wide multiplication implementation
case $set_widemul in
int128)
AC_DEFINE(USE_FORCE_WIDEMUL_INT128, 1, [Define this symbol to force the use of the (unsigned) __int128 based wide multiplication implementation])
;;
esac
-# select bignum implementation
-case $set_bignum in
-gmp)
- AC_DEFINE(HAVE_LIBGMP, 1, [Define this symbol if libgmp is installed])
- AC_DEFINE(USE_NUM_GMP, 1, [Define this symbol to use the gmp implementation for num])
- AC_DEFINE(USE_FIELD_INV_NUM, 1, [Define this symbol to use the num-based field inverse implementation])
- AC_DEFINE(USE_SCALAR_INV_NUM, 1, [Define this symbol to use the num-based scalar inverse implementation])
- ;;
-no)
- AC_DEFINE(USE_NUM_NONE, 1, [Define this symbol to use no num implementation])
- AC_DEFINE(USE_FIELD_INV_BUILTIN, 1, [Define this symbol to use the native field inverse implementation])
- AC_DEFINE(USE_SCALAR_INV_BUILTIN, 1, [Define this symbol to use the native scalar inverse implementation])
- ;;
-*)
- AC_MSG_ERROR([invalid bignum implementation])
- ;;
-esac
-
-#set ecmult window size
+# Set ecmult window size
if test x"$req_ecmult_window" = x"auto"; then
set_ecmult_window=15
else
;;
esac
-#set ecmult gen precision
+# Set ecmult gen precision
if test x"$req_ecmult_gen_precision" = x"auto"; then
set_ecmult_gen_precision=4
else
if test x"$use_tests" = x"yes"; then
SECP_OPENSSL_CHECK
- if test x"$has_openssl_ec" = x"yes"; then
- if test x"$enable_openssl_tests" != x"no"; then
+ if test x"$enable_openssl_tests" != x"no" && test x"$has_openssl_ec" = x"yes"; then
+ enable_openssl_tests=yes
AC_DEFINE(ENABLE_OPENSSL_TESTS, 1, [Define this symbol if OpenSSL EC functions are available])
SECP_TEST_INCLUDES="$SSL_CFLAGS $CRYPTO_CFLAGS $CRYPTO_CPPFLAGS"
SECP_TEST_LIBS="$CRYPTO_LIBS"
SECP_TEST_LIBS="$SECP_TEST_LIBS -lgdi32"
;;
esac
- fi
else
if test x"$enable_openssl_tests" = x"yes"; then
AC_MSG_ERROR([OpenSSL tests requested but OpenSSL with EC support is not available])
fi
+ enable_openssl_tests=no
fi
else
if test x"$enable_openssl_tests" = x"yes"; then
AC_MSG_ERROR([OpenSSL tests requested but tests are not enabled])
fi
+ enable_openssl_tests=no
fi
-if test x"$set_bignum" = x"gmp"; then
- SECP_LIBS="$SECP_LIBS $GMP_LIBS"
- SECP_INCLUDES="$SECP_INCLUDES $GMP_CPPFLAGS"
+if test x"$enable_valgrind" = x"yes"; then
+ SECP_INCLUDES="$SECP_INCLUDES $VALGRIND_CPPFLAGS"
+fi
+
+# Add -Werror and similar flags passed from the outside (for testing, e.g., in CI)
+SECP_CFLAGS="$SECP_CFLAGS $WERROR_CFLAGS"
+
+# Handle static precomputation (after everything which modifies CFLAGS and friends)
+if test x"$use_ecmult_static_precomputation" != x"no"; then
+ if test x"$cross_compiling" = x"no"; then
+ set_precomp=yes
+ if test x"${CC_FOR_BUILD+x}${CFLAGS_FOR_BUILD+x}${CPPFLAGS_FOR_BUILD+x}${LDFLAGS_FOR_BUILD+x}" != x; then
+ AC_MSG_WARN([CC_FOR_BUILD, CFLAGS_FOR_BUILD, CPPFLAGS_FOR_BUILD, and/or LDFLAGS_FOR_BUILD is set but ignored because we are not cross-compiling.])
+ fi
+ # If we're not cross-compiling, simply use the same compiler for building the static precompation code.
+ CC_FOR_BUILD="$CC"
+ CPPFLAGS_FOR_BUILD="$CPPFLAGS"
+ SECP_CFLAGS_FOR_BUILD="$SECP_CFLAGS"
+ CFLAGS_FOR_BUILD="$CFLAGS"
+ LDFLAGS_FOR_BUILD="$LDFLAGS"
+ else
+ AX_PROG_CC_FOR_BUILD
+
+ # Temporarily switch to an environment for the native compiler
+ save_cross_compiling=$cross_compiling
+ cross_compiling=no
+ SAVE_CC="$CC"
+ CC="$CC_FOR_BUILD"
+ SAVE_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS_FOR_BUILD"
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS_FOR_BUILD"
+ SAVE_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS_FOR_BUILD"
+
+ SECP_TRY_APPEND_DEFAULT_CFLAGS(SECP_CFLAGS_FOR_BUILD)
+
+ AC_MSG_CHECKING([for working native compiler: ${CC_FOR_BUILD}])
+ AC_RUN_IFELSE(
+ [AC_LANG_PROGRAM([], [])],
+ [working_native_cc=yes],
+ [working_native_cc=no],[:])
+
+ # Restore the environment
+ cross_compiling=$save_cross_compiling
+ CC="$SAVE_CC"
+ CPPFLAGS="$SAVE_CPPFLAGS"
+ CFLAGS="$SAVE_CFLAGS"
+ LDFLAGS="$SAVE_LDFLAGS"
+
+ if test x"$working_native_cc" = x"no"; then
+ AC_MSG_RESULT([no])
+ set_precomp=no
+ m4_define([please_set_for_build], [Please set CC_FOR_BUILD, CPPFLAGS_FOR_BUILD, CFLAGS_FOR_BUILD, and/or LDFLAGS_FOR_BUILD.])
+ if test x"$use_ecmult_static_precomputation" = x"yes"; then
+ AC_MSG_ERROR([native compiler ${CC_FOR_BUILD} does not produce working binaries. please_set_for_build])
+ else
+ AC_MSG_WARN([Disabling statically generated ecmult table because the native compiler ${CC_FOR_BUILD} does not produce working binaries. please_set_for_build])
+ fi
+ else
+ AC_MSG_RESULT([yes])
+ set_precomp=yes
+ fi
+ fi
+
+ AC_SUBST(CC_FOR_BUILD)
+ AC_SUBST(CPPFLAGS_FOR_BUILD)
+ AC_SUBST(SECP_CFLAGS_FOR_BUILD)
+ AC_SUBST(CFLAGS_FOR_BUILD)
+ AC_SUBST(LDFLAGS_FOR_BUILD)
+else
+ set_precomp=no
fi
if test x"$set_precomp" = x"yes"; then
AC_DEFINE(USE_ECMULT_STATIC_PRECOMPUTATION, 1, [Define this symbol to use a statically generated ecmult table])
fi
+###
+### Handle module options
+###
+
if test x"$enable_module_ecdh" = x"yes"; then
AC_DEFINE(ENABLE_MODULE_ECDH, 1, [Define this symbol to enable the ECDH module])
fi
AC_DEFINE(ENABLE_MODULE_EXTRAKEYS, 1, [Define this symbol to enable the extrakeys module])
fi
-if test x"$use_external_asm" = x"yes"; then
- AC_DEFINE(USE_EXTERNAL_ASM, 1, [Define this symbol if an external (non-inline) assembly implementation is used])
-fi
-
if test x"$use_external_default_callbacks" = x"yes"; then
AC_DEFINE(USE_EXTERNAL_DEFAULT_CALLBACKS, 1, [Define this symbol if an external implementation of the default callbacks is used])
fi
+###
+### Check for --enable-experimental if necessary
+###
+
if test x"$enable_experimental" = x"yes"; then
AC_MSG_NOTICE([******])
AC_MSG_NOTICE([WARNING: experimental build])
AC_MSG_NOTICE([Experimental features do not have stable APIs or properties, and may not be safe for production use.])
- AC_MSG_NOTICE([Building ECDH module: $enable_module_ecdh])
AC_MSG_NOTICE([Building extrakeys module: $enable_module_extrakeys])
AC_MSG_NOTICE([Building schnorrsig module: $enable_module_schnorrsig])
AC_MSG_NOTICE([******])
else
- if test x"$enable_module_ecdh" = x"yes"; then
- AC_MSG_ERROR([ECDH module is experimental. Use --enable-experimental to allow.])
- fi
if test x"$enable_module_extrakeys" = x"yes"; then
AC_MSG_ERROR([extrakeys module is experimental. Use --enable-experimental to allow.])
fi
fi
fi
+###
+### Generate output
+###
+
AC_CONFIG_HEADERS([src/libsecp256k1-config.h])
AC_CONFIG_FILES([Makefile libsecp256k1.pc])
AC_SUBST(SECP_INCLUDES)
AC_SUBST(SECP_LIBS)
AC_SUBST(SECP_TEST_LIBS)
AC_SUBST(SECP_TEST_INCLUDES)
+AC_SUBST(SECP_CFLAGS)
AM_CONDITIONAL([ENABLE_COVERAGE], [test x"$enable_coverage" = x"yes"])
AM_CONDITIONAL([USE_TESTS], [test x"$use_tests" != x"no"])
AM_CONDITIONAL([USE_EXHAUSTIVE_TESTS], [test x"$use_exhaustive_tests" != x"no"])
AM_CONDITIONAL([USE_EXTERNAL_ASM], [test x"$use_external_asm" = x"yes"])
AM_CONDITIONAL([USE_ASM_ARM], [test x"$set_asm" = x"arm"])
-dnl make sure nothing new is exported so that we don't break the cache
+# Make sure nothing new is exported so that we don't break the cache.
PKGCONFIG_PATH_TEMP="$PKG_CONFIG_PATH"
unset PKG_CONFIG_PATH
PKG_CONFIG_PATH="$PKGCONFIG_PATH_TEMP"
echo " with ecmult precomp = $set_precomp"
echo " with external callbacks = $use_external_default_callbacks"
echo " with benchmarks = $use_benchmark"
+echo " with tests = $use_tests"
+echo " with openssl tests = $enable_openssl_tests"
echo " with coverage = $enable_coverage"
echo " module ecdh = $enable_module_ecdh"
echo " module recovery = $enable_module_recovery"
echo " module schnorrsig = $enable_module_schnorrsig"
echo
echo " asm = $set_asm"
-echo " bignum = $set_bignum"
echo " ecmult window size = $set_ecmult_window"
echo " ecmult gen prec. bits = $set_ecmult_gen_precision"
-dnl Hide test-only options unless they're used.
+# Hide test-only options unless they're used.
if test x"$set_widemul" != xauto; then
echo " wide multiplication = $set_widemul"
fi
echo
echo " valgrind = $enable_valgrind"
echo " CC = $CC"
-echo " CFLAGS = $CFLAGS"
echo " CPPFLAGS = $CPPFLAGS"
+echo " SECP_CFLAGS = $SECP_CFLAGS"
+echo " CFLAGS = $CFLAGS"
echo " LDFLAGS = $LDFLAGS"
echo
+if test x"$set_precomp" = x"yes"; then
+echo " CC_FOR_BUILD = $CC_FOR_BUILD"
+echo " CPPFLAGS_FOR_BUILD = $CPPFLAGS_FOR_BUILD"
+echo " SECP_CFLAGS_FOR_BUILD = $SECP_CFLAGS_FOR_BUILD"
+echo " CFLAGS_FOR_BUILD = $CFLAGS_FOR_BUILD"
+echo " LDFLAGS_FOR_BUILD = $LDFLAGS_FOR_BUILD"
+fi
projects / secp256k1.git / blobdiff