With larger vector sizes, it turns out oprsz == maxsz, and we only
need to represent mismatch for oprsz <= 32. We do, however, need
to represent larger oprsz and do so without reducing SIMD_DATA_BITS.
Reduce the size of the oprsz field and increase the maxsz field.
Steal the oprsz value of 24 to indicate equality with maxsz.
* remotes/huth-gitlab/tags/pull-request-2020-10-06:
tests/qtest/cdrom: Add more s390x-related boot tests
pc-bios/s390: Update the s390-ccw bios binaries
pc-bios: s390x: Go into disabled wait when encountering a PGM exception
pc-bios: s390x: Use reset PSW if avaliable
pc-bios: s390x: Save PSW rework
pc-bios: s390x: Fix bootmap.c zipl component entry data handling
pc-bios/s390-ccw: break loop if a null block number is reached
pc-bios/s390-ccw: fix off-by-one error
pc-bios/s390-ccw/main: Remove superfluous call to enable_subchannel()
pc-bios/s390-ccw: Allow booting in case the first virtio-blk disk is bad
pc-bios/s390-ccw: Scan through all devices if no boot device specified
pc-bios/s390-ccw: Do not bail out early if not finding a SCSI disk
pc-bios/s390-ccw: Move the inner logic of find_subch() to a separate function
pc-bios/s390-ccw: Introduce ENODEV define and remove guards of others
pc-bios/s390-ccw: Move ipl-related code from main() into a separate function
pc-bios/s390-ccw/Makefile: Compile with -std=gnu99, -fwrapv and -fno-common
Thomas Huth [Thu, 6 Aug 2020 10:16:13 +0000 (12:16 +0200)]
tests/qtest/cdrom: Add more s390x-related boot tests
Let's add two new tests:
1) Booting with "bootindex" is the architected default behavior on the
s390x target, so we should have at least one test that is using the
"bootindex" property.
2) The s390-ccw bios used to fail when other unbootable devices have
been specified before the bootable device (without "bootindex"). Now
that the s390-ccw bios is a little bit smarter here, we should test
this scenario, too, to avoid regressions.
Janosch Frank [Tue, 6 Oct 2020 09:42:47 +0000 (05:42 -0400)]
pc-bios: s390x: Save PSW rework
We don't need to save the ipl_continue variable in lowcore and have it
limited to 32 bits because of the lowcore layout. Let's move it to a
new 64 bit variable and get rid of the reset info struct.
Janosch Frank [Tue, 6 Oct 2020 09:42:46 +0000 (05:42 -0400)]
pc-bios: s390x: Fix bootmap.c zipl component entry data handling
The two main types of zipl component entries are execute and
load/data. The last member of the component entry struct therefore
denotes either a PSW or an address. Let's make this a bit more clear
by introducing a union and cleaning up the code that uses that struct
member.
The execute type component entries written by zipl contain short PSWs,
not addresses. Let's mask them and only pass the address part to
jump_to_IPL_code(uint64_t address) because it expects an address as
visible by the name of the argument.
Marc Hartmayer [Thu, 24 Sep 2020 08:59:25 +0000 (10:59 +0200)]
pc-bios/s390-ccw: break loop if a null block number is reached
Break the loop if `cur_block_nr` is a null block number because this
means that the end of chunk is reached. In this case we will try to
boot the default entry.
Marc Hartmayer [Thu, 24 Sep 2020 08:59:24 +0000 (10:59 +0200)]
pc-bios/s390-ccw: fix off-by-one error
This error takes effect when the magic value "zIPL" is located at the
end of a block. For example if s2_cur_blk = 0x7fe18000 and the magic
value "zIPL" is located at 0x7fe18ffc - 0x7fe18fff.
Thomas Huth [Thu, 6 Aug 2020 09:41:51 +0000 (11:41 +0200)]
pc-bios/s390-ccw/main: Remove superfluous call to enable_subchannel()
enable_subchannel() is already done during is_dev_possibly_bootable()
(which is called from find_boot_device() -> find_subch()), so there
is no need to do this again in the main() function.
Thomas Huth [Tue, 28 Jul 2020 16:14:50 +0000 (18:14 +0200)]
pc-bios/s390-ccw: Allow booting in case the first virtio-blk disk is bad
If you try to boot with two virtio-blk disks (without bootindex), and
only the second one is bootable, the s390-ccw bios currently stops at
the first disk and does not continue booting from the second one. This
is annoying - and all other major QEMU firmwares succeed to boot from
the second disk in this case, so we should do the same in the s390-ccw
bios, too.
Thomas Huth [Tue, 28 Jul 2020 14:29:03 +0000 (16:29 +0200)]
pc-bios/s390-ccw: Scan through all devices if no boot device specified
If no boot device has been specified (via "bootindex=..."), the s390-ccw
bios scans through all devices to find a bootable device. But so far, it
stops at the very first block device (including virtio-scsi controllers
without attached devices) that it finds, no matter whether it is bootable
or not. That leads to some weird situatation where it is e.g. possible
to boot via:
qemu-system-s390x -hda /path/to/disk.qcow2
but not if there is e.g. a virtio-scsi controller specified before:
While using "bootindex=..." is clearly the preferred way of booting
on s390x, we still can make the life for the users at least a little
bit easier if we look at all available devices to find a bootable one.
Thomas Huth [Tue, 28 Jul 2020 12:30:14 +0000 (14:30 +0200)]
pc-bios/s390-ccw: Do not bail out early if not finding a SCSI disk
In case the user did not specify a boot device, we want to continue
looking for other devices if there are no valid SCSI disks on a virtio-
scsi controller. As a first step, do not panic in this case and let
the control flow carry the error to the upper functions instead.
Thomas Huth [Wed, 5 Aug 2020 15:41:08 +0000 (17:41 +0200)]
pc-bios/s390-ccw: Introduce ENODEV define and remove guards of others
Remove the "#ifndef E..." guards from the defines here - the header
guard S390_CCW_H at the top of the file should avoid double definition,
and if the error code is defined in a different file already, we're in
trouble anyway, then it's better to see the error at compile time instead
of hunting weird behavior during runtime later.
Also define ENODEV - we will use this in a later patch.
Thomas Huth [Tue, 28 Jul 2020 11:24:11 +0000 (13:24 +0200)]
pc-bios/s390-ccw/Makefile: Compile with -std=gnu99, -fwrapv and -fno-common
The main QEMU code is compiled with -std=gnu99, -fwrapv and -fno-common.
We should use the same flags for the s390-ccw bios, too, to avoid that
we get different behavior with different compiler versions that changed
their default settings in the course of time (it happened at least with
-std=... and -fno-common in the past already).
While we're at it, also group the other flags here in a little bit nicer
fashion: Move the two "-m" flags out of the "-f" area and specify them on
a separate line.
* remotes/bonzini-gitlab/tags/for-upstream: (37 commits)
tests/acceptance: add reverse debugging test
replay: create temporary snapshot at debugger connection
replay: describe reverse debugging in docs/replay.txt
gdbstub: add reverse continue support in replay mode
gdbstub: add reverse step support in replay mode
replay: flush rr queue before loading the vmstate
replay: implement replay-seek command
replay: introduce breakpoint at the specified step
replay: introduce info hmp/qmp command
qapi: introduce replay.json for record/replay-related stuff
migration: introduce icount field for snapshots
qcow2: introduce icount field for snapshots
replay: provide an accessor for rr filename
replay: don't record interrupt poll
configure: don't enable ASLR for --enable-debug Windows builds
configure: consistently pass CFLAGS/CXXFLAGS/LDFLAGS to meson
configure: do not clobber environment CFLAGS/CXXFLAGS/LDFLAGS
dtc: Convert Makefile bits to meson bits
slirp: Convert Makefile bits to meson bits
accel/tcg: use current_machine as it is always set for softmmu
...
Peter Maydell [Tue, 6 Oct 2020 11:15:59 +0000 (12:15 +0100)]
Merge remote-tracking branch 'remotes/stefanha-gitlab/tags/block-pull-request' into staging
Pull request
v2:
* Removed clang-format call from scripts/block-coroutine-wrapper.py. This
avoids the issue with clang version incompatibility. It could be added back
in the future but the code is readable without reformatting and it also
makes the build less dependent on the environment.
# gpg: Signature made Mon 05 Oct 2020 16:42:28 BST
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <[email protected]>" [full]
# gpg: aka "Stefan Hajnoczi <[email protected]>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha-gitlab/tags/block-pull-request:
util/vfio-helpers: Rework the IOVA allocator to avoid IOVA reserved regions
util/vfio-helpers: Collect IOVA reserved regions
docs: add 'io_uring' option to 'aio' param in qemu-options.hx
include/block/block.h: drop non-ascii quotation mark
block/io: refactor save/load vmstate
block: drop bdrv_prwv
block: generate coroutine-wrapper code
scripts: add block-coroutine-wrapper.py
block: declare some coroutine functions in block/coroutines.h
block/io: refactor coroutine wrappers
block: return error-code from bdrv_invalidate_cache
block/nvme: Replace magic value by SCALE_MS definition
block/nvme: Use register definitions from 'block/nvme.h'
block/nvme: Drop NVMeRegs structure, directly use NvmeBar
block/nvme: Reduce I/O registers scope
block/nvme: Map doorbells pages write-only
util/vfio-helpers: Pass page protections to qemu_vfio_pci_map_bar()
Pavel Dovgalyuk [Sat, 3 Oct 2020 17:14:06 +0000 (20:14 +0300)]
tests/acceptance: add reverse debugging test
This is a test for GDB reverse debugging commands: reverse step and reverse continue.
Every test in this suite consists of two phases: record and replay.
Recording saves the execution of some instructions and makes an initial
VM snapshot to allow reverse execution.
Replay saves the order of the first instructions and then checks that they
are executed backwards in the correct order.
After that the execution is replayed to the end, and reverse continue
command is checked by setting several breakpoints, and asserting
that the execution is stopped at the last of them.
v5:
- disabled (as some other tests) when running on gitlab
due to the unidentified timeout problem
Message-Id: <160174524678.12451.13258942849173670277.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <[email protected]>
Pavel Dovgalyuk [Sat, 3 Oct 2020 17:14:01 +0000 (20:14 +0300)]
replay: create temporary snapshot at debugger connection
When record/replay does not uses overlays for storing the snapshots,
user is not capable of issuing reverse debugging commands.
This patch adds creation of the VM snapshot on the temporary
overlay image, when the debugger connects to QEMU.
Therefore the execution can be rewind to the moment
of the debugger connection while debugging the virtual machine.
v4 changes:
- added an example of the command line for reverse debugging of
the diskless machine
Message-Id: <160174523509.12451.1409905901920738979.stgit@pasha-ThinkPad-X280>
Pavel Dovgalyuk [Sat, 3 Oct 2020 17:13:49 +0000 (20:13 +0300)]
gdbstub: add reverse continue support in replay mode
This patch adds support of the reverse continue operation for gdbstub.
Reverse continue finds the last breakpoint that would happen in normal
execution from the beginning to the current moment.
Implementation of the reverse continue replays the execution twice:
to find the breakpoints that were hit and to seek to the last breakpoint.
Reverse continue loads the previous snapshot and tries to find the breakpoint
since that moment. If there are no such breakpoints, it proceeds to
the earlier snapshot, and so on. When no breakpoints or watchpoints were
hit at all, execution stops at the beginning of the replay log.
Pavel Dovgalyuk [Sat, 3 Oct 2020 17:13:43 +0000 (20:13 +0300)]
gdbstub: add reverse step support in replay mode
GDB remote protocol supports two reverse debugging commands:
reverse step and reverse continue.
This patch adds support of the first one to the gdbstub.
Reverse step is intended to step one instruction in the backwards
direction. This is not possible in regular execution.
But replayed execution is deterministic, therefore we can load one of
the prior snapshots and proceed to the desired step. It is equivalent
to stepping one instruction back.
There should be at least one snapshot preceding the debugged part of
the replay log.
v4 changes:
- inverted condition in cpu_handle_guest_debug (suggested by Alex Bennée)
Message-Id: <160174522341.12451.1498758422543765253.stgit@pasha-ThinkPad-X280>
Pavel Dovgalyuk [Sat, 3 Oct 2020 17:13:37 +0000 (20:13 +0300)]
replay: flush rr queue before loading the vmstate
Non-empty record/replay queue prevents saving and loading the VM state,
because it includes pending bottom halves and block coroutines.
But when the new VM state is loaded, we don't have to preserve the consistency
of the current state anymore. Therefore this patch just flushes the queue
allowing the coroutines to finish and removes checking for empty rr queue
for load_snapshot function.
Pavel Dovgalyuk [Sat, 3 Oct 2020 17:13:31 +0000 (20:13 +0300)]
replay: implement replay-seek command
This patch adds hmp/qmp commands replay_seek/replay-seek that proceed
the execution to the specified instruction count.
The command automatically loads nearest snapshot and replays the execution
to find the desired instruction count.
Pavel Dovgalyuk [Sat, 3 Oct 2020 17:13:26 +0000 (20:13 +0300)]
replay: introduce breakpoint at the specified step
This patch introduces replay_break, replay_delete_break
qmp and hmp commands.
These commands allow stopping at the specified instruction.
It may be useful for debugging when there are some known
events that should be investigated.
replay_break command has one argument - number of instructions
executed since the start of the replay.
replay_delete_break removes previously set breakpoint.
Pavel Dovgalyuk [Sat, 3 Oct 2020 17:13:20 +0000 (20:13 +0300)]
replay: introduce info hmp/qmp command
This patch introduces 'info replay' monitor command and
corresponding qmp request.
These commands request the current record/replay mode, replay log file
name, and the instruction count (number of recorded/replayed
instructions). The instruction count can be used with the
replay_seek/replay_break commands added in the next two patches.
Pavel Dovgalyuk [Sat, 3 Oct 2020 17:13:08 +0000 (20:13 +0300)]
migration: introduce icount field for snapshots
Saving icount as a parameters of the snapshot allows navigation between
them in the execution replay scenario.
This information can be used for finding a specific snapshot for proceeding
the recorded execution to the specific moment of the time.
E.g., 'reverse step' action (introduced in one of the following patches)
needs to load the nearest snapshot which is prior to the current moment
of time.
This patch also updates snapshot test which verifies qemu monitor output.
v4 changes:
- squashed format update with test output update
v7 changes:
- introduced the spaces between the fields in snapshot info output
- updated the test to match new field widths
Message-Id: <160174518865.12451.14327573383978752463.stgit@pasha-ThinkPad-X280>
Pavel Dovgalyuk [Sat, 3 Oct 2020 17:12:57 +0000 (20:12 +0300)]
replay: provide an accessor for rr filename
This patch adds an accessor function for the name of the record/replay
log file. Adding an accessor instead of making variable global,
prevents accidental modification of this variable by other modules.
Pavel Dovgalyuk [Sat, 3 Oct 2020 17:12:51 +0000 (20:12 +0300)]
replay: don't record interrupt poll
Interrupt poll is not a real interrupt event. It is needed only for
thread safety. This interrupt is used for i386 and converted
to hardware interrupt by cpu_handle_interrupt function.
Therefore it is not needed to be recorded, because hardware
interrupt will be recorded after converting.
configure: don't enable ASLR for --enable-debug Windows builds
Unlike other OSs it is not possible for gdb to temporarily disable ASLR when
debugging executables on Windows which causes gdb to fail with memory access
errors when trying to debug QEMU.
Keep ASLR enabled by default on Windows via the --dynamicbase compiler flag
except for --enable-debug builds when there is a clear expectation that a
functioning gdb is expected at the cost of slightly less security.
Paolo Bonzini [Wed, 23 Sep 2020 09:26:17 +0000 (05:26 -0400)]
configure: consistently pass CFLAGS/CXXFLAGS/LDFLAGS to meson
Environment variables like CFLAGS are easy to accidentally change. Meson
warns if that happens, but in a project with a lot of configuration that
is easy to lose. It is also surprising behavior since meson caches -D
options and remembers those on reconfiguration (which we rely on,
since configure options become -D options).
By placing the user-provided CFLAGS, CXXFLAGS and LDFLAGS in the
cross file, we at least get consistent behavior. These environment
variables are still ugly and not really recommended, but there are
distros that rely on them. For the gory details, refer to
https://github.com/mesonbuild/meson/issues/4664.
Paolo Bonzini [Wed, 23 Sep 2020 09:26:15 +0000 (05:26 -0400)]
configure: do not clobber environment CFLAGS/CXXFLAGS/LDFLAGS
If the CFLAGS, CXXFLAGS or LDFLAGS variables are present in the environment,
any modification made within the configure script is passed down to Meson.
This is particularly undesirable for the "-pie" option, since it overrides
"-shared" and thus messes up the linker flags for shared modules.
Using a separate variable therefore fixes the bug, while clarifying that
the scope of these CFLAGS is just the configure script.
We also do not need to pass those variables in config-host.mak; they
were only used for printing the summary now that all submodules are
built with handwritten Meson rules). For now synthesize CFLAGS in the
configuration summary, the next patch will also pass them in a cleaner
way using the cross file.
Paolo Bonzini [Mon, 5 Oct 2020 09:31:15 +0000 (11:31 +0200)]
dtc: Convert Makefile bits to meson bits
Build the library via the main meson.build just like for capstone.
This improves the current state of affairs in that we will re-link
the qemu executables against a changed libfdt.a, which we wouldn't
do before-hand, and lets us remove the whole recursive make machinery.
Paolo Bonzini [Mon, 5 Oct 2020 09:31:15 +0000 (11:31 +0200)]
slirp: Convert Makefile bits to meson bits
SLIRP uses Meson so it could become a subproject in the future,
but our choice of configure options is not yet supported in Meson
(https://github.com/mesonbuild/meson/pull/7740).
For now, build the library via the main meson.build just like for
capstone.
This improves the current state of affairs in that we will re-link
the qemu executables against a changed libslirp.a, which we wouldn't
do before-hand.
Claudio Fontana [Tue, 11 Aug 2020 13:16:33 +0000 (15:16 +0200)]
cpus: add handle_interrupt to the CpusAccel interface
kvm: uses the generic handler
qtest: uses the generic handler
whpx: changed to use the generic handler (identical implementation)
hax: changed to use the generic handler (identical implementation)
hvf: changed to use the generic handler (identical implementation)
tcg: adapt tcg-cpus to point to the tcg-specific handler
Claudio Fontana [Wed, 19 Aug 2020 14:01:03 +0000 (16:01 +0200)]
cpus: remove checks for non-NULL cpus_accel
now that all accelerators support the CpusAccel interface,
we can remove most checks for non-NULL cpus_accel,
we just add a sanity check/assert at vcpu creation.
TCG is the first accelerator to register a "CpusAccel" interface
on initialization, providing functions for starting a vcpu,
kicking a vcpu, sychronizing state and getting virtual clock
and ticks.
Peter Maydell [Mon, 5 Oct 2020 10:25:55 +0000 (11:25 +0100)]
Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-cap-20201003' into staging
Update capstone submodule from v3.0.5 to v5 ("next").
Convert submodule build to meson.
Enable capstone disassembly for s390x.
Code cleanups in disas.c
# gpg: Signature made Sat 03 Oct 2020 10:33:44 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "[email protected]"
# gpg: Good signature from "Richard Henderson <[email protected]>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth-gitlab/tags/pull-cap-20201003:
disas/capstone: Add skipdata hook for s390x
disas: Enable capstone disassembly for s390x
disas: Split out capstone code to disas/capstone.c
disas: Configure capstone for aarch64 host without libvixl
disas: Cleanup plugin_disas
disas: Use qemu/bswap.h for bfd endian loads
disas: Clean up CPUDebug initialization
disas: Move host asm annotations to tb_gen_code
capstone: Require version 4.0 from a system library
capstone: Update to upstream "next" branch
capstone: Convert Makefile bits to meson bits
Eric Auger [Tue, 29 Sep 2020 08:55:50 +0000 (10:55 +0200)]
util/vfio-helpers: Rework the IOVA allocator to avoid IOVA reserved regions
Introduce the qemu_vfio_find_fixed/temp_iova helpers which
respectively allocate IOVAs from the bottom/top parts of the
usable IOVA range, without picking within host IOVA reserved
windows. The allocation remains basic: if the size is too big
for the remaining of the current usable IOVA range, we jump
to the next one, leaving a hole in the address map.
Eric Auger [Tue, 29 Sep 2020 08:55:49 +0000 (10:55 +0200)]
util/vfio-helpers: Collect IOVA reserved regions
The IOVA allocator currently ignores host reserved regions.
As a result some chosen IOVAs may collide with some of them,
resulting in VFIO MAP_DMA errors later on. This happens on ARM
where the MSI reserved window quickly is encountered:
[0x8000000, 0x8100000]. since 5.4 kernel, VFIO returns the usable
IOVA regions. So let's enumerate them in the prospect to avoid
them, later on.
include/block/block.h: drop non-ascii quotation mark
This is the only non-ascii character in the file and it doesn't really
needed here. Let's use normal "'" symbol for consistency with the rest
11 occurrences of "'" in the file.
Now that we are not maintaining boilerplate code for coroutine
wrappers, there is no more sense in keeping the extra indirection layer
of bdrv_prwv(). Let's drop it and instead generate pure bdrv_preadv()
and bdrv_pwritev().
Currently, bdrv_pwritev() and bdrv_preadv() are returning bytes on
success, auto generated functions will instead return zero, as their
_co_ prototype. Still, it's simple to make the conversion safe: the
only external user of bdrv_pwritev() is test-bdrv-drain, and it is
comfortable enough with bdrv_co_pwritev() instead. So prototypes are
moved to local block/coroutines.h. Next, the only internal use is
bdrv_pread() and bdrv_pwrite(), which are modified to return bytes on
success.
Of course, it would be great to convert bdrv_pread() and bdrv_pwrite()
to return 0 on success. But this requires audit (and probably
conversion) of all their users, let's leave it for another day
refactoring.
We have a very frequent pattern of creating a coroutine from a function
with several arguments:
- create a structure to pack parameters
- create _entry function to call original function taking parameters
from struct
- do different magic to handle completion: set ret to NOT_DONE or
EINPROGRESS or use separate bool field
- fill the struct and create coroutine from _entry function with this
struct as a parameter
- do coroutine enter and BDRV_POLL_WHILE loop
Let's reduce code duplication by generating coroutine wrappers.
This patch adds scripts/block-coroutine-wrapper.py together with some
friends, which will generate functions with declared prototypes marked
by the 'generated_co_wrapper' specifier.
The usage of new code generation is as follows:
1. define the coroutine function somewhere
int coroutine_fn bdrv_co_NAME(...) {...}
2. declare in some header file
int generated_co_wrapper bdrv_NAME(...);
with same list of parameters (generated_co_wrapper is
defined in "include/block/block.h").
3. Make sure the block_gen_c declaration in block/meson.build
mentions the file with your marker function.
Still, no function is now marked, this work is for the following
commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <[email protected]> Reviewed-by: Eric Blake <[email protected]>
Message-Id: <20200924185414[email protected]>
[Added encoding='utf-8' to open() calls as requested by Vladimir. Fixed
typo and grammar issues pointed out by Eric Blake. Removed clang-format
dependency that caused build test issues.
--Stefan] Signed-off-by: Stefan Hajnoczi <[email protected]>
block: declare some coroutine functions in block/coroutines.h
We are going to keep coroutine-wrappers code (structure-packing
parameters, BDRV_POLL wrapper functions) in separate auto-generated
files. So, we'll need a header with declaration of original _co_
functions, for those which are static now. As well, we'll need
declarations for wrapper functions. Do these declarations now, as a
preparation step.
Most of our coroutine wrappers already follow this convention:
We have 'coroutine_fn bdrv_co_<something>(<normal argument list>)' as
the core function, and a wrapper 'bdrv_<something>(<same argument
list>)' which does parameter packing and calls bdrv_run_co().
The only outsiders are the bdrv_prwv_co and
bdrv_common_block_status_above wrappers. Let's refactor them to behave
as the others, it simplifies further conversion of coroutine wrappers.
This patch adds an indirection layer, but it will be compensated by
a further commit, which will drop bdrv_co_prwv together with the
is_write logic, to keep the read and write paths separate.
block: return error-code from bdrv_invalidate_cache
This is the only coroutine wrapper from block.c and block/io.c which
doesn't return a value, so let's convert it to the common behavior, to
simplify moving to generated coroutine wrappers in a further commit.
Also, bdrv_invalidate_cache is a void function, returning error only
through **errp parameter, which is considered to be bad practice, as
it forces callers to define and propagate local_err variable, so
conversion is good anyway.
This patch leaves the conversion of .bdrv_co_invalidate_cache() driver
callbacks and bdrv_invalidate_cache_all() for another day.
zhenwei pi [Wed, 30 Sep 2020 10:04:40 +0000 (18:04 +0800)]
target-i386: post memory failure event to QMP
Post memory failure event through QMP to handle hardware memory corrupted
event. Rather than simply printing to the log, QEMU could report more
effective message to the client. For example, if a guest receives an MCE,
evacuating the host could be a good idea.
Introduce memory failure events for hypervisor and guest. This lets
mft: Need exactly one file argument. Try `mft --help' for more
information.
Suggested by Peter Maydell, rename events name&description to make
them architecture-neutral; and suggested by Paolo, add more info to
distinguish a mce is AR/AO, and if a previous MCE was still being
processed in the guest.
Previously we would only get a simple string "Triple fault" in qemu
log. Add detailed message for the two reasons to describe why qemu
has to reset the guest.
Paolo Bonzini [Tue, 1 Sep 2020 11:51:16 +0000 (07:51 -0400)]
meson: move sparse detection to Meson and rewrite check_sparse.py
Pass the path to the program to scripts/check_sparse.py, which
previously was not included in config-host.mak. Change
scripts/check_sparse.py to work with cgcc, which seems to
work better with sparse 0.6.x.
Paolo Bonzini [Fri, 18 Sep 2020 10:37:21 +0000 (06:37 -0400)]
configure: compute derivatives of target name in meson
Several CONFIG_* symbols in config-target.mak are easily computed from just
the target name. We do not need them in config-target.mak, and can instead
place them in the config_target dictionary only.
Paolo Bonzini [Fri, 18 Sep 2020 09:37:01 +0000 (05:37 -0400)]
configure: move accelerator logic to meson
Move to meson the code to detect the presence of accelerators, and
to define accelerator-specific config-target.h symbols.
The logic for now is duplicated in configure because it is still
in use to build the list of targets (which is in turn used to
create the config-target.mak files). The next patches remove it.
Paolo Bonzini [Fri, 18 Sep 2020 09:22:37 +0000 (05:22 -0400)]
configure: rewrite accelerator defaults as tests
Prepare to process "auto" in meson rather than configure: standardize the
shape of the code that changes "auto" to enabled/disabled, to ease the review
when it will be moved to meson.
Paolo Bonzini [Fri, 18 Sep 2020 08:57:25 +0000 (04:57 -0400)]
configure: convert accelerator variables to meson options
Prepare for moving the tests to meson. For now they only have
enabled/disabled as the possible values when meson is invoked,
but "auto" will be a possibility later, when configure will only
parse the command line options.
It is always possible to tell the length of an insn, even if the
actual insn is unknown. Skip the correct number of bytes, so that
we stay in sync with the instruction stream.
disas: Split out capstone code to disas/capstone.c
There is nothing target-specific about this code, so it
can be added to common_ss. This also requires that the
base capstone dependency be added to common_ss, so that
we get the correct include paths added to CFLAGS.
projects / qemu.git / log