Aurelien Jarno [Tue, 1 Jan 2013 17:02:22 +0000 (18:02 +0100)]
target-mips: copy insn_flags in DisasContext
Copy insn_flags in DisasContext to avoid passing a CPUMIPSState pointer
to subroutines, as suggested by Richard Henderson. Change subroutines to
use this new field and remove the first argument.
Anthony Liguori [Wed, 30 Jan 2013 16:51:47 +0000 (10:51 -0600)]
Merge remote-tracking branch 'pmaydell/arm-devs.next' into staging
# By Christoffer Dall (1) and Peter Maydell (1)
# Via Peter Maydell
* pmaydell/arm-devs.next:
hw/vexpress: Use correct HBI (board model number) for vexpress-a15
hw/arm_sysctl: Clear sysctl cfgctrl start bit
Anthony Liguori [Wed, 30 Jan 2013 16:51:18 +0000 (10:51 -0600)]
Merge remote-tracking branch 'stefanha/trivial-patches' into staging
# By Markus Armbruster (12) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
qmp-commands.hx: s/tray-open/tray_open/ to match qapi schema
tests: Fix {rtc, m48t59}-test build on illumos
qemu-pixman.h: Avoid mutual inclusion loop with console.h
qemu-ga: Fix unchecked strdup() by converting to g_strdup()
qapi: Fix unchecked strdup() by converting to g_strdup()
libcacard: Fix unchecked strdup() by converting to g_strdup()
qemu-log: Plug trivial memory leak in cpu_set_log_filename()
qemu-log: Fix unchecked strdup() by converting to g_strdup()
virtfs-proxy-helper: Fix unchecked strdup() by conv. to g_strdup()
spice: Fix unchecked strdup() by converting to g_strdup()
readline: Fix unchecked strdup() by converting to g_strdup()
hw/9pfs: Fix unchecked strdup() by converting to g_strdup()
g_strdup(NULL) returns NULL; simplify
g_malloc(0) and g_malloc0(0) return NULL; simplify
xilinx_axidma: Fix debug mode compile messages
cadence_gem: Debug mode compile fixes
cadence_ttc: Debug mode compile fixes
vnc: Clean up vncws_send_handshake_response()
Anthony Liguori [Wed, 30 Jan 2013 16:48:23 +0000 (10:48 -0600)]
Merge remote-tracking branch 'afaerber-or/prep-up' into staging
# By Andreas Färber
# Via Andreas Färber
* afaerber-or/prep-up:
prep: Move PReP machine to hw/ppc/
prep_pci: Convert to QOM realizefn
prep_pci: Create PCIBus and PCIDevice in-place
Anthony Liguori [Wed, 30 Jan 2013 16:46:30 +0000 (10:46 -0600)]
Merge remote-tracking branch 'agraf/s390-for-upstream' into staging
# By Cornelia Huck (13) and others
# Via Alexander Graf
* agraf/s390-for-upstream:
s390: Drop set_bit usage in virtio_ccw.
s390: css error codes.
s390: Use s390_cpu_physical_memory_map for tpi.
sclpconsole: Don't instantiate sclpconsole with -nodefaults
s390: Add s390-ccw-virtio machine.
s390-virtio: Check for NULL device in reset hypercall
s390: Move hw files to hw/s390x
virtio-s390: add a reset function to virtio-s390 devices
s390: Make typeinfo const
s390: Add new channel I/O based virtio transport.
s390-virtio: Factor out some initialization code.
s390: Wire up channel I/O in kvm.
s390: Virtual channel subsystem support.
s390: Add channel I/O instructions.
s390: I/O interrupt and machine check injection.
s390: Channel I/O basic definitions.
s390: Add mapping helper functions.
s390: Lowcore mapping helper.
s390: Add default support for SCLP console
Peter Maydell [Mon, 21 Jan 2013 12:03:47 +0000 (12:03 +0000)]
qemu-pixman.h: Avoid mutual inclusion loop with console.h
Remove an unnecessary mutual inclusion loop between qemu-pixman.h and
console.h, since the former was only including the latter for
'PixelFormat*', which can be provided by typedefs.h. This requires a
minor adjustment to the files which included qemu-pixman.h, since
they were relying on it implicitly dragging in all of console.h.
g_malloc(0) and g_malloc0(0) return NULL; simplify
Once upon a time, it was decided that qemu_malloc(0) should abort.
Switching to glib retired that bright idea. Some code that was added
to cope with it (e.g. in commits 702ef63, b76b6e9) is still around.
Bury it.
Use appropriate types, drop superfluous casts, use sizeof, don't
exploit that this particular call of gnutls_fingerprint() doesn't
change its last argument.
Anthony Liguori [Tue, 29 Jan 2013 22:57:41 +0000 (16:57 -0600)]
Merge remote-tracking branch 'qemu-kvm/uq/master' into staging
* qemu-kvm/uq/master:
target-i386: kvm: prevent buffer overflow if -cpu foo, [x]level is too big
vmxcap: bit 9 of VMX_PROCBASED_CTLS2 is 'virtual interrupt delivery'
Anthony Liguori [Tue, 29 Jan 2013 22:57:04 +0000 (16:57 -0600)]
Merge remote-tracking branch 'mdroth/qga-pull-1-28-13' into staging
# By Markus Armbruster
# Via Michael Roth
* mdroth/qga-pull-1-28-13:
qemu-ga: Plug leaks on qmp_guest_network_get_interfaces() error paths
qemu-ga: Plug memory leak in guest_fsfreeze_cleanup()
sclpconsole: Don't instantiate sclpconsole with -nodefaults
libvirt specifies nodefaults and creates an sclp console with special
parameters. Let qemu follow nodefaults and don't create an sclp
console if nodefaults is specified.
Andreas Färber [Tue, 22 Jan 2013 23:24:08 +0000 (23:24 +0000)]
s390-virtio: Check for NULL device in reset hypercall
s390_virtio_bus_find_mem() may return a NULL VirtIOS390Device.
If called with, e.g., args[0] == 0, this leads to a segfault.
Fix this by adding error handling as done for other hypercalls.
Paolo Bonzini [Thu, 10 Jan 2013 04:40:25 +0000 (04:40 +0000)]
virtio-s390: add a reset function to virtio-s390 devices
virtio-s390 devices are not being reset when their bus is. To fix
this, add a reset method that forwards to virtio_reset. This is
only needed because of the "strange" modeling of virtio devices;
the ->vdev link is being handled manually rather than through qdev.
Alexander Graf [Thu, 24 Jan 2013 11:18:52 +0000 (12:18 +0100)]
s390: Add default support for SCLP console
The current s390 machine uses the virtio console as default console,
but this doesn't mean that we always want to keep it that way for new
machines.
This patch introduces a way for a machine type to specify that it wants
the default console to be an SCLP console, which is a lot closer to what
real hardware does.
Igor Mammedov [Mon, 28 Jan 2013 11:49:26 +0000 (12:49 +0100)]
target-i386: kvm: prevent buffer overflow if -cpu foo, [x]level is too big
Stack corruption may occur if too big 'level' or 'xlevel' values passed
on command line with KVM enabled, due to limited size of cpuid_data
in kvm_arch_init_vcpu().
Anthony Liguori [Mon, 28 Jan 2013 20:48:03 +0000 (14:48 -0600)]
Merge remote-tracking branch 'afaerber/qom-cpu' into staging
* afaerber/qom-cpu: (37 commits)
kvm: Pass CPUState to kvm_on_sigbus_vcpu()
cpu: Unconditionalize CPUState fields
target-m68k: Use type_register() instead of type_register_static()
target-unicore32: Use type_register() instead of type_register_static()
target-openrisc: Use type_register() instead of type_register_static()
target-unicore32: Catch attempt to instantiate abstract type in cpu_init()
target-openrisc: Catch attempt to instantiate abstract type in cpu_init()
target-m68k: Catch attempt to instantiate abstract type in cpu_init()
target-arm: Catch attempt to instantiate abstract type in cpu_init()
target-alpha: Catch attempt to instantiate abstract type in cpu_init()
qom: Introduce object_class_is_abstract()
target-unicore32: Detect attempt to instantiate non-CPU type in cpu_init()
target-openrisc: Detect attempt to instantiate non-CPU type in cpu_init()
target-m68k: Detect attempt to instantiate non-CPU type in cpu_init()
target-alpha: Detect attempt to instantiate non-CPU type in cpu_init()
target-arm: Detect attempt to instantiate non-CPU type in cpu_init()
cpu: Add model resolution support to CPUClass
target-i386: Remove setting tsc-frequency from x86_def_t
target-i386: Set custom features/properties without intermediate x86_def_t
target-i386: Remove vendor_override field from CPUX86State
...
Conflicts:
tests/Makefile
Resolved simple conflict caused by lack of context in Makefile
Anthony Liguori [Mon, 28 Jan 2013 20:46:45 +0000 (14:46 -0600)]
Merge remote-tracking branch 'kwolf/for-anthony' into staging
# By Paolo Bonzini (14) and others
# Via Kevin Wolf
* kwolf/for-anthony: (24 commits)
ide: Add fall through annotations
block: Create proper size file for disk mirror
ahci: Add migration support
ahci: Change data types in preparation for migration
ahci: Remove unused AHCIDevice fields
hbitmap: add assertion on hbitmap_iter_init
mirror: do nothing on zero-sized disk
block/vdi: Check for bad signature
block/vdi: Improved return values from vdi_open
block/vdi: Improve debug output for signature
block: Use error code EMEDIUMTYPE for wrong format in some block drivers
block: Add special error code for wrong format
mirror: support arbitrarily-sized iterations
mirror: support more than one in-flight AIO operation
mirror: add buf-size argument to drive-mirror
mirror: switch mirror_iteration to AIO
mirror: allow customizing the granularity
block: allow customizing the granularity of the dirty bitmap
block: return count of dirty sectors, not chunks
mirror: perform COW if the cluster size is bigger than the granularity
...
Anthony Liguori [Mon, 28 Jan 2013 20:41:25 +0000 (14:41 -0600)]
Merge remote-tracking branch 'luiz/queue/qmp' into staging
# By Lei Li (3) and others
# Via Luiz Capitulino
* luiz/queue/qmp:
QAPI: Introduce memchar-read QMP command
QAPI: Introduce memchar-write QMP command
qemu-char: Add new char backend CirMemCharDriver
docs: document virtio-balloon stats
balloon: re-enable balloon stats
balloon: drop old stats code & API
block: Monitor command commit neglects to report some errors
linux-user and bsd-user would therefore get a CPUState type with
instance_size ~8 bytes longer than expected.
Fix this by unconditionally having the fields in CPUState.
In practice, target-specific CPU types' instance_size would compensate
this, and upstream qom/cpu.c does not yet touch any affected field.
Andreas Färber [Sun, 27 Jan 2013 18:31:00 +0000 (19:31 +0100)]
target-m68k: Use type_register() instead of type_register_static()
According to its documentation, type_register_static()'s TypeInfo
argument should exist for the life type of the type.
Therefore use type_register() when registering the list of CPU subtypes.
No functional change with the current implementation.
Andreas Färber [Wed, 23 Jan 2013 11:01:00 +0000 (12:01 +0100)]
target-unicore32: Use type_register() instead of type_register_static()
According to its documentation, type_register_static()'s TypeInfo
argument should exist for the life type of the type.
Therefore use type_register() when registering the list of CPU subtypes.
No functional change with the current implementation.
Andreas Färber [Wed, 23 Jan 2013 10:10:14 +0000 (11:10 +0100)]
target-openrisc: Use type_register() instead of type_register_static()
According to its documentation, type_register_static()'s TypeInfo
argument should exist for the life type of the type.
Therefore use type_register() when registering the list of CPU subtypes.
No functional change with the current implementation.
Andreas Färber [Wed, 16 Jan 2013 14:45:34 +0000 (15:45 +0100)]
prep_pci: Convert to QOM realizefn
SysBusDeviceClass' initfn merely calls SysBusDeviceClass::init, so we
can already hook up our own realizefn overwriting this behavior.
A symmetric unrealizefn is not necessary, knowing that the child's
unrealizefn is still no-op, too. Avoids ripping it out again when
recursive realization at DeviceState-level is implemented.
Igor Mammedov [Mon, 21 Jan 2013 14:06:39 +0000 (15:06 +0100)]
target-i386: Remove setting tsc-frequency from x86_def_t
Setting tsc-frequency from x86_def_t is NOP because default tsc_khz
in x86_def_t is 0 and CPUX86State.tsc_khz is also initialized to 0
by default. So there is no need to overwrite tsc_khz with default 0
because field was already initialized to 0.
Custom tsc-frequency setting is not affected due to it being set
without using x86_def_t.
Field tsc_khz in x86_def_t becomes unused with this patch, so drop it
as well.
Igor Mammedov [Mon, 21 Jan 2013 14:06:38 +0000 (15:06 +0100)]
target-i386: Set custom features/properties without intermediate x86_def_t
Move custom features parsing after built-in cpu_model defaults are set
and set custom features directly on CPU instance. That allows to make a
clear distinction between built-in cpu model defaults that eventually
should go into class_init() and extra property setting which is done
after defaults are set on CPU instance.
Impl. details:
* use object_property_parse() property setter so it would be a mechanical
change to switch to global properties later.
* And after all current features/properties are converted into static
properties, it will take a trivial patch to switch to global properties.
Which will allow to:
* get CPU instance initialized with all parameters passed on -cpu ...
cmd. line from object_new() call.
* call cpu_model/featurestr parsing only once before CPUs are created
* open a road for removing CPUxxxState.cpu_model_str field, when other
CPUs are similarly converted to subclasses and static properties.
- re-factor error handling, to use Error instead of fprintf()s, since
it is anyway passed in for property setter.
Igor Mammedov [Mon, 21 Jan 2013 14:06:37 +0000 (15:06 +0100)]
target-i386: Remove vendor_override field from CPUX86State
Commit 8935499831312 makes cpuid return to guest host's vendor value
instead of built-in one by default if kvm_enabled() == true and allows
to override this behavior if 'vendor' is specified on -cpu command line.
But every time guest calls cpuid to get 'vendor' value, host's value is
read again and again in default case.
It complicates semantics of vendor property and makes it harder to use.
Instead of reading 'vendor' value from host every time cpuid[vendor] is
called, override 'vendor' value only once in cpu_x86_find_by_name(), when
built-in CPU model is found and if(kvm_enabled() == true).
It provides the same default semantics
if (kvm_enabled() == true) vendor = host's vendor
else vendor = built-in vendor
and then later:
if (custom vendor) vendor = custom vendor
'vendor' value is overridden when user provides it on -cpu command line,
and there is no need for vendor_override field anymore, remove it.
Igor Mammedov [Mon, 21 Jan 2013 14:06:36 +0000 (15:06 +0100)]
target-i386: Replace uint32_t vendor fields by vendor string in x86_def_t
Vendor property setter takes string as vendor value but cpudefs
use uint32_t vendor[123] fields to define vendor value. It makes it
difficult to unify and use property setter for values from cpudefs.
Simplify code by using vendor property setter, vendor[123] fields
are converted into vendor[13] array to keep its value. And vendor
property setter is used to access/set value on CPU.
- Make for() cycle reusable for the next patch by adding
x86_cpu_vendor_words2str()
Intel's CPUID spec[1] says:
"
5.1.1 ...
These registers contain the ASCII string: GenuineIntel
...
"
List[2] of known vendor values shows that they all are 12 ASCII
characters long, padded where necessary with space.
Current supported values are all ASCII characters packed in
ebx, edx, ecx. So lets state that QEMU supports 12 printable ASCII
characters packed in ebx, edx, ecx registers for cpuid(0) instruction.
Andreas Färber [Mon, 21 Jan 2013 00:02:28 +0000 (01:02 +0100)]
target-i386: Drop redundant list of CPU definitions
It is no longer needed since dropping cpudef config file support.
Cleaning this up removes knowledge about other models from x86_def_t,
in preparation for reusing x86_def_t as intermediate step towards pure
QOM X86CPU subclasses.
Andreas Färber [Mon, 21 Jan 2013 00:00:24 +0000 (01:00 +0100)]
target-i386: Simplify cpu_x86_find_by_name()
Catch NULL name argument early to avoid repeated checks.
Similarly, check for -cpu host early and untangle from iterating through
model definitions. This prepares for introducing X86CPU subclasses.
Eduardo Habkost [Tue, 22 Jan 2013 20:25:09 +0000 (18:25 -0200)]
pc: Generate APIC IDs according to CPU topology
This keeps compatibility on machine-types pc-1.2 and older, and prints a
warning in case the requested configuration won't get the correct
topology.
I couldn't think of a better way to warn about broken topology when in
compat mode other than using error_report(). The warning message will
probably be buried in a log file somewhere, but it's better than
nothing.
Eduardo Habkost [Wed, 23 Jan 2013 17:58:27 +0000 (15:58 -0200)]
target-i386: Topology & APIC ID utility functions
This introduces utility functions for the APIC ID calculation, based on:
Intel® 64 Architecture Processor Topology Enumeration
http://software.intel.com/en-us/articles/intel-64-architecture-processor-topology-enumeration/
The code should be compatible with AMD's "Extended Method" described at:
AMD CPUID Specification (Publication #25481)
Section 3: Multiple Core Calcuation
as long as:
- nr_threads is set to 1;
- OFFSET_IDX is assumed to be 0;
- CPUID Fn8000_0008_ECX[ApicIdCoreIdSize[3:0]] is set to
apicid_core_width().
Eduardo Habkost [Wed, 23 Jan 2013 17:51:18 +0000 (15:51 -0200)]
pc: Set fw_cfg data based on APIC ID calculation
This changes FW_CFG_MAX_CPUS and FW_CFG_NUMA to use apic_id_for_cpu(),
so the NUMA table can be based on the APIC IDs, instead of CPU index
(SeaBIOS knows nothing about CPU indexes, just APIC IDs).
Eduardo Habkost [Tue, 22 Jan 2013 20:25:02 +0000 (18:25 -0200)]
target-i386: kvm: Set vcpu_id to APIC ID instead of CPU index
The CPU ID in KVM is supposed to be the APIC ID, so change the
KVM_CREATE_VCPU call to match it. The current behavior didn't break
anything yet because today the APIC ID is assumed to be equal to the CPU
index, but this won't be true in the future.
Eduardo Habkost [Thu, 17 Jan 2013 20:59:29 +0000 (18:59 -0200)]
pc: Reverse pc_init_pci() compatibility logic
Currently, the pc-1.4 machine init function enables PV EOI and then
calls the pc-1.2 machine init function. The problem with this approach
is that now we can't enable any additional compatibility code inside the
pc-1.2 init function because it would end up enabling the compatibility
behavior on pc-1.3 and pc-1.4 as well.
This reverses the logic so that the pc-1.2 machine init function will
disable PV EOI, and then call the pc-1.4 machine init function.
This way we can change older machine-types to enable compatibility
behavior, and the newer machine-types (pc-1.3, pc-q35-1.4 and
pc-i440fx-1.4) would just use the default behavior.
(This means that one nice side-effect of this change is that pc-q35-1.4
will get PV EOI enabled by default, too)
It would be interesting to eventually change pc_init_pci_no_kvmclock()
and pc_init_isa() to reuse pc_init_pci_1_2() as well (so we don't need
to duplicate compatibility code on those two functions). But this will
be probably much easier to do after we create a PCInitArgs struct for
the PC initialization arguments, and/or after we use global-properties
to implement the compatibility modes present in pc_init_pci_1_2().
Eduardo Habkost [Thu, 17 Jan 2013 20:59:28 +0000 (18:59 -0200)]
target-i386: Don't set any KVM flag by default if KVM is disabled
This is a cleanup that tries to solve two small issues:
- We don't need a separate kvm_pv_eoi_features variable just to keep a
constant calculated at compile-time, and this style would require
adding a separate variable (that's declared twice because of the
CONFIG_KVM ifdef) for each feature that's going to be
enabled/disabled by machine-type compat code.
- The pc-1.3 code is setting the kvm_pv_eoi flag on cpuid_kvm_features
even when KVM is disabled at runtime. This small inconsistency in
the cpuid_kvm_features field isn't a problem today because
cpuid_kvm_features is ignored by the TCG code, but it may cause
unexpected problems later when refactoring the CPUID handling code.
This patch eliminates the kvm_pv_eoi_features variable and simply uses
kvm_enabled() inside the enable_kvm_pv_eoi() compat function, so it
enables kvm_pv_eoi only if KVM is enabled. I believe this makes the
behavior of enable_kvm_pv_eoi() clearer and easier to understand.
Andreas Färber [Thu, 17 Jan 2013 16:30:08 +0000 (17:30 +0100)]
target-openrisc: Clean up triple QOM casts
Instead of calling openrisc_env_get_cpu(), casting to CPU() via the
ENV_GET_CPU() compatibility macro and casting back to OPENRISC_CPU(),
just call openrisc_env_get_cpu() directly.
ENV_GET_CPU() is meant as workaround for target-independent code only.
Andreas Färber [Sat, 5 Jan 2013 13:14:27 +0000 (14:14 +0100)]
target-openrisc: Drop OpenRISCCPUList
It was missed in 92a3136174f60ee45b113296cb2c2a5225b00369 (cpu:
Introduce CPUListState struct) because its naming did not match the
*CPUListState pattern. Use the generalized CPUListState instead.
Default to moving back to the IDLE state after the COLLECTING_DATA
state. For a well behaved guest this patch has no consequence, but
A bad guest could crash QEMU by using one of the erase commands
followed by a longer than 5 byte argument (undefined behaviour).
xilinx_ethlite: Flush queued packets on SW service
Software services a received packet by clearing the CTRL_S bit in the RX_CTRLn
register. If this bit is cleared, flush any packets queued for the device.
The eth_can_rx() function only checks the first buffers status ("ping"). The
controller should be able to receive into "pong" when ping-pong is enabled.
Checks the active buffer (either "ping" or "pong") when determining can_rx()
rather than just testing "ping".
Blue Swirl [Sat, 26 Jan 2013 14:18:28 +0000 (14:18 +0000)]
Merge branch 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf
* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf:
PPC: e500: Select MPIC v4.2 on ppce500 platform
PPC: e500: fix mpic_iack address
openpic: add basic support for MPIC v4.2
openpic: fix timer address decoding
openpic: fix remaining issues from idr-to-destmask conversion
pseries: Adjust default VIO address allocations to play better with libvirt
pseries: Improve handling of multiple PCI host bridges
target-ppc: Give a meaningful error if too many threads are specified
cuda: Move ADB bus into CUDA state
adb: QOM'ify ADB devices
adb: QOM'ify Apple Desktop Bus
cuda: QOM'ify CUDA
ide/macio: QOM'ify MacIO IDE
mac_nvram: QOM'ify MacIO NVRAM
mac_nvram: Mark as Big Endian
mac_nvram: Clean up public API
macio: Split MacIO in two
macio: Delay qdev init until all fields are initialized
macio: QOM'ify some more
ppc: Move Mac machines to hw/ppc/
Andreas Färber [Sat, 26 Jan 2013 11:45:14 +0000 (12:45 +0100)]
tests: Add gcov support for x86_64 qtest
Since x86_64 is a superset of i386 and reuses all its test cases, adopt
all the i386 gcov source files as well, substituting their paths
appropriately.
projects / qemu.git / log