Stefan Hajnoczi [Tue, 6 Dec 2016 10:24:24 +0000 (10:24 +0000)]
Merge remote-tracking branch 'jasowang/tags/net-pull-request' into staging
# gpg: Signature made Tue 06 Dec 2016 02:24:23 AM GMT
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <[email protected]>"
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* jasowang/tags/net-pull-request:
fsl_etsec: Fix various small problems in hexdump code
fsl_etsec: Pad short payloads with zeros
net: mcf: check receive buffer size register value
Stefan Hajnoczi [Tue, 6 Dec 2016 09:49:51 +0000 (09:49 +0000)]
Merge remote-tracking branch 'armbru/tags/pull-qapi-2016-12-05' into staging
QAPI patches for 2016-12-05
# gpg: Signature made Mon 05 Dec 2016 04:41:53 PM GMT
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <[email protected]>"
# gpg: aka "Markus Armbruster <[email protected]>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* armbru/tags/pull-qapi-2016-12-05:
qapi: add missing colon-ending for section name
qapi: use one symbol per line
qapi: fix various symbols mismatch in documentation
qapi: fix missing symbol @prefix
qapi: fix schema symbol sections
qga/schema: fix double-return in doc
tests: Avoid qobject_from_jsonf("%"PRId64)
test-qga: Avoid qobject_from_jsonv("%"PRId64)
qmp-event: Avoid qobject_from_jsonf("%"PRId64)
Stefan Hajnoczi [Tue, 6 Dec 2016 09:38:39 +0000 (09:38 +0000)]
Merge remote-tracking branch 'kraxel/tags/pull-vga-20161205-1' into staging
qxl: fix flickering.
cirrus: avoid devision by zero.
virtio-gpu: fix two leaks.
# gpg: Signature made Mon 05 Dec 2016 10:55:45 AM GMT
# gpg: using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <[email protected]>"
# gpg: aka "Gerd Hoffmann <[email protected]>"
# gpg: aka "Gerd Hoffmann (private) <[email protected]>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* kraxel/tags/pull-vga-20161205-1:
display: cirrus: check vga bits per pixel(bpp) value
virtio-gpu: fix memory leak in update_cursor_data_virgl
virtio-gpu: fix information leak in getting capset info dispatch
qxl: Only emit QXL_INTERRUPT_CLIENT_MONITORS_CONFIG on config changes
Document:
1. The new debug and logfile options with their usages
2. New json format and its usage and
3. update "GlusterFS, Device URL Syntax" section in "Invocation"
Alex Bennée [Fri, 2 Dec 2016 17:34:54 +0000 (17:34 +0000)]
target-arm/translate-a64: fix gen_load_exclusive
While testing rth's latest TCG patches with risu I found ldaxp was
broken. Investigating further I found it was broken by 1dd089d0 when
the cmpxchg atomic work was merged. As part of that change the code
attempted to be clever by doing a single 64 bit load and then shuffle
the data around to set the two 32 bit registers.
As I couldn't quite follow the endian magic I've simply partially
reverted the change to the original code gen_load_exclusive code. This
doesn't affect the cmpxchg functionality as that is all done on in
gen_store_exclusive part which is untouched.
I've also restored the comment that was removed (with a slight tweak
to mention cmpxchg).
Eric Blake [Wed, 23 Nov 2016 17:36:56 +0000 (11:36 -0600)]
tests: Avoid qobject_from_jsonf("%"PRId64)
The qobject_from_jsonf() function implements a pseudo-printf
language for creating a QObject; however, it is hard-coded to
only parse a subset of formats understood by -Wformat, and is
not a straight synonym to bare printf(). In particular, any
use of an int64_t integer works only if the system's
definition of PRId64 matches what the parser expects; which
works on glibc (%lld or %ld depending on 32- vs. 64-bit) and
mingw (%I64d), but not on Mac OS (%qd). Rather than enhance
the parser, it is just as easy to force the use of int (where
the value is small enough) or long long instead of int64_t,
which we know always works.
This should cover all remaining testsuite uses of
qobject_from_json[fv]() that were trying to rely on PRId64,
although my proof for that was done by adding in asserts and
checking that 'make check' still passed, where such asserts
are inappropriate during hard freeze. A later series in 2.9
may remove all dynamic JSON parsing, but that's a bigger task.
Eric Blake [Wed, 23 Nov 2016 17:36:55 +0000 (11:36 -0600)]
test-qga: Avoid qobject_from_jsonv("%"PRId64)
The qobject_from_jsonv() function implements a pseudo-printf
language for creating a QObject; however, it is hard-coded to
only parse a subset of formats understood by -Wformat, and is
not a straight synonym to bare printf(). In particular, any
use of an int64_t integer works only if the system's
definition of PRId64 matches what the parser expects; which
works on glibc (%lld or %ld depending on 32- vs. 64-bit) and
mingw (%I64d), but not on Mac OS (%qd). Rather than enhance
the parser, it is just as easy to use normal printf() for
this particular conversion, matching what is done elsewhere
in this file [1], which is safe in this instance because the
format does not contain any of the problematic differences
(bare '%' or the '%s' format).
The use of PRId64 for a variable named 'pid' is gross, but it
is a sad reality of the 64-bit mingw environment, which
mistakenly defines pid_t as a 64-bit type even though getpid()
returns 'int' on that platform [2]. Our definition of the
QGA GuestExec type defines 'pid' as a 64-bit entity, and we
can't tighten it to 'int32' unless the mingw header is fixed.
Using 'long long' instead of 'int64_t' just so that we can
stick with qobject_from_jsonv("%lld") instead of printf() is
not any prettier, since we may have later type churn anyways.
[1] see 'git grep -A2 strdup_printf tests/test-qga.c'
[2] https://bugzilla.redhat.com/show_bug.cgi?id=1397787
Eric Blake [Wed, 23 Nov 2016 17:36:54 +0000 (11:36 -0600)]
qmp-event: Avoid qobject_from_jsonf("%"PRId64)
The qobject_from_jsonf() function implements a pseudo-printf
language for creating a QObject; however, it is hard-coded to
only parse a subset of formats understood by -Wformat, and is
not a straight synonym to bare printf(). In particular, any
use of an int64_t integer works only if the system's
definition of PRId64 matches what the parser expects; which
works on glibc (%lld or %ld depending on 32- vs. 64-bit) and
mingw (%I64d), but not on Mac OS (%qd). Rather than enhance
the parser, it is just as easy to use 'long long', which we
know always works. There are few enough callers of
qobject_from_json[fv]() that it is easy to audit that this is
the only non-testsuite caller that was actually relying on
this particular conversion.
display: cirrus: check vga bits per pixel(bpp) value
In Cirrus CLGD 54xx VGA Emulator, if cirrus graphics mode is VGA,
'cirrus_get_bpp' returns zero(0), which could lead to a divide
by zero error in while copying pixel data. The same could occur
via blit pitch values. Add check to avoid it.
Andrey Smirnov [Mon, 28 Nov 2016 18:13:14 +0000 (10:13 -0800)]
fsl_etsec: Pad short payloads with zeros
Depending on QEMU network setup it is possible for us to receive a
complete Ethernet packet that is less 64 bytes long. One such example is
when QEMU is configured to use a standalone TAP device (not set to be a
part of any bridge) receives and ARP packet. In cases like that we need
to add more than just 4-bytes of CRC padding and ensure that our payload
is at least 60 bytes long, such that, when combined with CRC padding
bytes the resulting size is at least 802.3 minimum MTU bytes
long (64). Failing to do that results in code in etsec_walk_rx_ring()
setting BD_RX_SH which, in turn, makes corresponding Linux driver of
emulated host to reject buffer as a runt packet
net: mcf: check receive buffer size register value
ColdFire Fast Ethernet Controller uses a receive buffer size
register(EMRBR) to hold maximum size of all receive buffers.
It is set by a user before any operation. If it was set to be
zero, ColdFire emulator would go into an infinite loop while
receiving data in mcf_fec_receive. Add check to avoid it.
Li Qiang [Tue, 1 Nov 2016 11:06:58 +0000 (04:06 -0700)]
virtio-gpu: fix memory leak in update_cursor_data_virgl
In update_cursor_data_virgl function, if the 'width'/ 'height'
is not equal to current cursor's width/height it will return
without free the 'data' allocated previously. This will lead
a memory leak issue. This patch fix this issue.
Li Qiang [Tue, 1 Nov 2016 09:53:11 +0000 (02:53 -0700)]
virtio-gpu: fix information leak in getting capset info dispatch
In virgl_cmd_get_capset_info dispatch function, the 'resp' hasn't
been full initialized before writing to the guest. This will leak
the 'resp.padding' and 'resp.hdr.padding' fieds to the guest. This
patch fix this issue.
qxl: Only emit QXL_INTERRUPT_CLIENT_MONITORS_CONFIG on config changes
Currently if the client keeps sending the same monitor config to
QEMU/spice-server, QEMU will always raise
a QXL_INTERRUPT_CLIENT_MONITORS_CONFIG regardless of whether there was a
change or not.
Guest-side (with fedora 25), the kernel QXL KMS driver will also forward the
event to user-space without checking if there were actual changes.
Next in line are gnome-shell/mutter (on a default f25 install), which
will try to reconfigure everything without checking if there is anything
to do.
Where this gets ugly is that when applying the resolution changes,
gnome-shell/mutter will call drmModeRmFB, drmModeAddFB, and
drmModeSetCrtc, which will cause the primary surface to be destroyed and
recreated by the QXL KMS driver. This in turn will cause the client to
resend a client monitors config message, which will cause QEMU to reemit
an interrupt with an unchanged monitors configuration, ...
This causes https://bugzilla.redhat.com/show_bug.cgi?id=1266484
This commit makes sure that we only emit
QXL_INTERRUPT_CLIENT_MONITORS_CONFIG when there are actual configuration
changes the guest should act on.
Michael Roth [Wed, 30 Nov 2016 23:05:34 +0000 (17:05 -0600)]
spapr: fix default DRC state for coldplugged LMBs
Currently we set the initial isolation/allocation state for DRCs
associated with coldplugged LMBs to ISOLATED/UNUSABLE,
respectively, under the assumption that the guest will move this
state to UNISOLATED/USABLE.
In fact, this is only the case for LMBs added via hotplug. For
coldplugged LMBs, the guest actually assumes the initial state to
be UNISOLATED/USABLE.
In practice, this only becomes an issue when we attempt to unplug
one of these LMBs, where the guest kernel will issue an
rtas-get-sensor-state call to check that the corresponding DRC is
in an USABLE state before it will release the LMB back to
QEMU. If the returned state is otherwise, the guest will assume no
further action is needed, which bypasses the QEMU-side cleanup that
occurs during the USABLE->UNUSABLE transition. This results in
LMBs and their corresponding pc-dimm devices to stick around
indefinitely.
This patch fixes the issue by manually setting DRCs associated with
cold-plugged LMBs to UNISOLATED/ALLOCATED, but leaving the hotplug
state untouched. As it turns out, this is analogous to the handling
for cold-plugged CPUs in spapr_core_plug().
Gonglei [Sat, 26 Nov 2016 03:07:55 +0000 (11:07 +0800)]
virtio-crypto: fix uninitialized variables
Though crypto_cfg.reserve is an unused field, let me
initialize the structure in order to make coverity happy.
*** CID 1365923: Uninitialized variables (UNINIT)
/hw/virtio/virtio-crypto.c: 851 in virtio_crypto_get_config()
845 stl_le_p(&crypto_cfg.mac_algo_h, c->conf.mac_algo_h);
846 stl_le_p(&crypto_cfg.aead_algo, c->conf.aead_algo);
847 stl_le_p(&crypto_cfg.max_cipher_key_len, c->conf.max_cipher_key_len);
848 stl_le_p(&crypto_cfg.max_auth_key_len, c->conf.max_auth_key_len);
849 stq_le_p(&crypto_cfg.max_size, c->conf.max_size);
850
>>> CID 1365923: Uninitialized variables (UNINIT)
>>> Using uninitialized value "crypto_cfg". Field "crypto_cfg.reserve"
is uninitialized when calling "memcpy".
[Note: The source code implementation of the function
has been overridden by a builtin model.]
851 memcpy(config, &crypto_cfg, c->config_size);
852 }
853
Laszlo Ersek [Tue, 29 Nov 2016 19:55:33 +0000 (20:55 +0100)]
loader: fix undefined behavior in rom_order_compare()
According to ISO C99 / N1256 (referenced in HACKING):
> 6.5.8 Relational operators
>
> 4 For the purposes of these operators, a pointer to an object that is
> not an element of an array behaves the same as a pointer to the first
> element of an array of length one with the type of the object as its
> element type.
>
> 5 When two pointers are compared, the result depends on the relative
> locations in the address space of the objects pointed to. If two
> pointers to object or incomplete types both point to the same object,
> or both point one past the last element of the same array object, they
> compare equal. If the objects pointed to are members of the same
> aggregate object, pointers to structure members declared later compare
> greater than pointers to members declared earlier in the structure,
> and pointers to array elements with larger subscript values compare
> greater than pointers to elements of the same array with lower
> subscript values. All pointers to members of the same union object
> compare equal. If the expression /P/ points to an element of an array
> object and the expression /Q/ points to the last element of the same
> array object, the pointer expression /Q+1/ compares greater than /P/.
> In all other cases, the behavior is undefined.
Our AddressSpace objects are allocated generally individually, and kept in
the "address_spaces" linked list, so we mustn't compare their addresses
with relops.
Convert the pointers subjected to the relop in rom_order_compare() to
"uintptr_t":
> 7.18.1.4 Integer types capable of holding object pointers
>
> 1 [...]
>
> The following type designates an unsigned integer type with the
> property that any valid pointer to void can be converted to this type,
> then converted back to pointer to void, and the result will compare
> equal to the original pointer:
>
> /uintptr_t/
>
> These types are optional.
Laszlo Ersek [Tue, 29 Nov 2016 19:55:32 +0000 (20:55 +0100)]
loader: fix handling of custom address spaces when adding ROM blobs
* Commit 3e76099aacb4 ("loader: Allow a custom AddressSpace when loading
ROMs") introduced the "Rom.as" field:
(1) It modified the utility callers of rom_insert() to take "as" as a
new parameter from *their* callers, and set "rom->as" from that
parameter. The functions covered were rom_add_file() and
rom_add_elf_program().
(2) It also modified rom_insert() itself, to auto-assign
"&address_space_memory", in case the external caller passed -- and
the utility caller forwarded -- as=NULL.
Except, commit 3e76099aacb4 forgot to update the third utility caller of
rom_insert(), under point (1), namely rom_add_blob().
* Later, commit 5e774eb3bd264 ("loader: Add AddressSpace loading support
to uImages") added the load_uimage_as() function, and the
rom_add_blob_fixed_as() function-like macro, with the necessary changes
elsewhere to propagate the new "as" parameter to rom_add_blob():
At this point, the signature (and workings) of rom_add_blob() had been
broken already, and the rom_add_blob_fixed_as() macro passed its "_as"
parameter to rom_add_blob() as "callback_opaque". Given that the
"fw_callback" parameter itself was set to NULL (correctly), this did no
additional damage (the opaque arg would never be used), but ultimately
it broke the new functionality of load_uimage_as().
* The load_uimage_as() function would be put to use in one of the later
patches, commit e481a1f63c93 ("generic-loader: Add a generic loader").
* We can fix this only in a unified patch now. Append "AddressSpace *as"
to the signature of rom_add_blob(), and handle the new parameter. Pass
NULL from all current callers, except from rom_add_blob_fixed_as(),
where "_as" has to be bumped to the proper position.
* Note that rom_add_file() rejects the case when both "mr" and "as" are
passed in as non-NULL. The action that this is apparently supposed to
prevent is the
rom->mr = mr;
assignment (that's the only place where the "mr" parameter is used in
rom_add_file()). In rom_add_blob() though, we have no "mr" parameter,
and the actions done on the fw_cfg branch:
if (fw_file_name && fw_cfg) {
if (mc->rom_file_has_mr) {
data = rom_set_mr(rom, OBJECT(fw_cfg), devpath);
mr = rom->mr;
} else {
data = rom->data;
}
reflect those that are performed by rom_add_file() too (with mr==NULL):
if (rom->fw_file && fw_cfg) {
if ((!option_rom || mc->option_rom_has_mr) &&
mc->rom_file_has_mr) {
data = rom_set_mr(rom, OBJECT(fw_cfg), devpath);
} else {
data = rom->data;
}
Hence we need no additional restrictions in rom_add_blob().
* Stable is not affected as both problematic commits appeared first in
v2.8.0-rc0.
Stefan Hajnoczi [Tue, 29 Nov 2016 17:06:38 +0000 (17:06 +0000)]
Merge remote-tracking branch 'kwolf/tags/for-upstream' into staging
Block layer patches for 2.8.0-rc2
# gpg: Signature made Tue 29 Nov 2016 03:16:10 PM GMT
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <[email protected]>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* kwolf/tags/for-upstream:
docs: Specify that cache-clean-interval is only supported in Linux
qcow2: Remove stale comment
qcow2: Allow 'cache-clean-interval' in Linux only
qcow2: Make qcow2_cache_table_release() work only in Linux
Paolo Bonzini [Tue, 29 Nov 2016 15:37:20 +0000 (16:37 +0100)]
rules.mak: Also try -r to build modules
Building qemu fails in distributions where gcc enables PIE by default
(e.g. Debian unstable) with:
/usr/bin/ld: -r and -pie may not be used together
You have to use -r instead of -Wl,-r to avoid gcc passing -pie to the linker
when PIE is enabled and a relocatable object is passed. However, clang
does not know about -r, so try -Wl,-r first.
[This is a fix for commit c96f0ee6a67ca6277366e78ce5d84d5c20dd596f
("rules.mak: Use -r instead of -Wl, -r to fix building when PIE is
default") which mostly worked but broke the ./configure --enable-modules
build with clang.
--Stefan]
* bonzini/tags/for-upstream:
rules.mak: Use -r instead of -Wl, -r to fix building when PIE is default
migration/pcspk: Turn migration of pcspk off for 2.7 and older
migration/pcspk: Add a property to state if pcspk is migrated
pci-assign: sync MSI/MSI-X cap and table with PCIDevice
megasas: clean up and fix request completion/cancellation
megasas: do not call pci_dma_unmap after having freed the frame once
Max Reitz [Tue, 15 Nov 2016 22:47:32 +0000 (23:47 +0100)]
hbitmap: Fix shifts of constants by granularity
An hbitmap's granularity may be anything from 0 to 63, so when shifting
constants by its value, they should not be plain ints.
Even having changed the types, hbitmap_serialization_granularity() still
tries to shift 64 to the right by the granularity. This operation is
undefined if the granularity is greater than 57. Adding an assertion is
fine for now, because serializing is done only in tests so far, but this
means that only bitmaps with a granularity below 58 can be serialized
and we should thus add a hbitmap_is_serializable() function later.
One of the two places touched in this patch uses
QEMU_ALIGN_UP(x, 1 << y). We can use ROUND_UP() there, since the second
parameter is obviously a power of two.
* pm215/tags/pull-target-arm-20161128:
arm: Create /chosen and /memory devicetree nodes if necessary
generic-loader: file: Only set a PC if a CPU is specified
Jan Beulich [Fri, 25 Nov 2016 10:06:58 +0000 (03:06 -0700)]
xen: ignore direction in bufioreq handling
There's no way to communicate back read data, so only writes can ever
be usefully specified. Ignore the field, paving the road for eventually
re-using the bit for something else in a few (many?) years time.
Jan Beulich [Fri, 25 Nov 2016 10:06:33 +0000 (03:06 -0700)]
xen: slightly simplify bufioreq handling
There's no point setting fields always receiving the same value on each
iteration, as handle_ioreq() doesn't alter them anyway. Set state and
count once ahead of the loop, drop the redundant clearing of
data_is_ptr, and avoid the meaningless (because count is 1) setting of
df altogether.
Also avoid doing an unsigned long calculation of size when the field to
be initialized is only 32 bits wide (and the shift value in the range
0...3).
Jan Beulich [Fri, 25 Nov 2016 10:05:57 +0000 (03:05 -0700)]
xen: fix quad word bufioreq handling
We should not consume the second slot if it didn't get written yet.
Normal writers - i.e. Xen - would not update write_pointer between the
two writes, but the page may get fiddled with by the guest itself, and
we're better off avoiding to enter an infinite loop in that case.
Peter Xu [Fri, 25 Nov 2016 02:55:22 +0000 (10:55 +0800)]
pci-assign: sync MSI/MSI-X cap and table with PCIDevice
Since commit e1d4fb2d ("kvm-irqchip: x86: add msi route notify fn"),
kvm_irqchip_add_msi_route() starts to use pci_get_msi_message() to fetch
MSI info. This requires that we setup MSI related fields in PCIDevice.
For most devices, that won't be a problem, as long as we are using
general interfaces like msi_init()/msix_init().
However, for pci-assign devices, MSI/MSI-X is treated differently - PCI
assign devices are maintaining its own MSI table and cap information in
AssignedDevice struct. however that's not synced up with PCIDevice's
fields. That will leads to pci_get_msi_message() failed to find correct
MSI capability, even with an NULL msix_table.
A quick fix is to sync up the two places: both the capability bits and
table address for MSI/MSI-X.
Paolo Bonzini [Thu, 10 Nov 2016 15:27:51 +0000 (16:27 +0100)]
megasas: clean up and fix request completion/cancellation
megasas_command_cancel is a callback; it should report the abort in
the frame, not try another abort! Compare for instance with
mptsas_request_cancelled.
So extract the common bits for request completion in a new function
megasas_complete_command, call it from both the .complete and .cancel
callbacks, and remove duplicate pieces from the DCMD path.
Paolo Bonzini [Thu, 15 Sep 2016 22:36:58 +0000 (00:36 +0200)]
megasas: do not call pci_dma_unmap after having freed the frame once
Commit 8cc4678 ("megasas: remove useless check for cmd->frame", 2016-07-17) was
wrong because I trusted Coverity too much. It turns out that there _is_ a
path through which cmd->frame can become NULL. After megasas_handle_frame's
switch (md->frame->header.frame_cmd), megasas_init_firmware can be called.
From there, megasas_reset_frames will call megasas_unmap_frame which resets
cmd->frame = NULL.
However, there is another bug to fix in there, because megasas_unmap_frame
is called again after setting the command status. In this case QEMU should
not do anything, instead it calls pci_dma_unmap again. Harmless, but
better fix it.
Guenter Roeck [Thu, 17 Nov 2016 01:30:21 +0000 (17:30 -0800)]
arm: Create /chosen and /memory devicetree nodes if necessary
While customary, the /chosen and /memory devicetree nodes do not have to
exist. Create if necessary. Also create the /memory/device_type property
if needed.
Alistair Francis [Sat, 12 Nov 2016 02:51:20 +0000 (18:51 -0800)]
generic-loader: file: Only set a PC if a CPU is specified
This patch fixes the generic-loader file loading to only set the program
counter if a CPU is specified. This follows what is written in the
documentation and was always part of the original intention.
Alberto Garcia [Fri, 25 Nov 2016 11:27:44 +0000 (13:27 +0200)]
qcow2: Allow 'cache-clean-interval' in Linux only
The cache-clean-interval option of qcow2 only works on Linux. However
we allow setting it in other systems regardless of whether it works or
not.
In those systems this option is not simply a no-op: it actually
invalidates perfectly valid cache tables for no good reason without
freeing their memory.
This patch forbids using that option in non-Linux systems.
Alberto Garcia [Fri, 25 Nov 2016 11:27:43 +0000 (13:27 +0200)]
qcow2: Make qcow2_cache_table_release() work only in Linux
We are using QEMU_MADV_DONTNEED to discard the memory of individual L2
cache tables. The problem with this is that those semantics are
specific to the Linux madvise() system call. Other implementations of
madvise() (including the very Linux implementation of posix_madvise())
don't do that, so we cannot use them for the same purpose.
This patch makes the code Linux-specific and uses madvise() directly
since there's no point in going through qemu_madvise() for this.
Stefan Hajnoczi [Thu, 24 Nov 2016 10:16:23 +0000 (10:16 +0000)]
Merge remote-tracking branch 'gkurz/tags/for-upstream' into staging
This pull request fixes some leaks (memory, fd) in the handle and proxy
backends.
# gpg: Signature made Wed 23 Nov 2016 12:53:41 PM GMT
# gpg: using DSA key 0x02FC3AEB0101DBC2
# gpg: Good signature from "Greg Kurz <[email protected]>"
# gpg: aka "Greg Kurz <[email protected]>"
# gpg: aka "Greg Kurz <[email protected]>"
# gpg: aka "Greg Kurz <[email protected]>"
# gpg: aka "Gregory Kurz (Groug) <[email protected]>"
# gpg: aka "Gregory Kurz (Cimai Technology) <[email protected]>"
# gpg: aka "Gregory Kurz (Meiosys Technology) <[email protected]>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2
* gkurz/tags/for-upstream:
9pfs: add cleanup operation for proxy backend driver
9pfs: add cleanup operation for handle backend driver
9pfs: add cleanup operation in FileOperations
9pfs: adjust the order of resource cleanup in device unrealize
Olaf Hering [Wed, 23 Nov 2016 10:39:12 +0000 (10:39 +0000)]
xen_disk: split discard input to match internal representation
The guest sends discard requests as u64 sector/count pairs, but the
block layer operates internally with s64/s32 pairs. The conversion
leads to IO errors in the guest, the discard request is not processed.
Li Qiang [Wed, 23 Nov 2016 12:53:34 +0000 (13:53 +0100)]
9pfs: add cleanup operation for proxy backend driver
In the init operation of proxy backend dirver, it allocates a
V9fsProxy struct and some other resources. We should free these
resources when the 9pfs device is unrealized. This is what this
patch does.
Li Qiang [Wed, 23 Nov 2016 12:53:34 +0000 (13:53 +0100)]
9pfs: add cleanup operation for handle backend driver
In the init operation of handle backend dirver, it allocates a
handle_data struct and opens a mount file. We should free these
resources when the 9pfs device is unrealized. This is what this
patch does.
Li Qiang [Wed, 23 Nov 2016 12:53:34 +0000 (13:53 +0100)]
9pfs: add cleanup operation in FileOperations
Currently, the backend of VirtFS doesn't have a cleanup
function. This will lead resource leak issues if the backed
driver allocates resources. This patch addresses this issue.
Stefan Hajnoczi [Wed, 23 Nov 2016 11:46:15 +0000 (11:46 +0000)]
Merge remote-tracking branch 'dgibson/tags/ppc-for-2.8-20161123' into staging
ppc patch queue 2016-11-23
Here's the first set of 2.8 hard freeze bugfixes for ppc.
The biggest thing here is a batch of fixes for migration breakages in
both 2.7 and current 2.8. Alas, there is at least one more migration
problem, which prevents memory unplug after a migration. I hoped to
include a fix for that here, but it turned out to have some problems
bigger than those it was solving. So, I expect at least one more hard
freeze pull request.
* dgibson/tags/ppc-for-2.8-20161123:
spapr: Fix 2.7<->2.8 migration of PCI host bridge
Revert "spapr: Fix migration of PCI host bridges from qemu-2.7"
target-ppc: Allow eventual removal of old migration mistakes
migration: Add VMSTATE_UINTTL_TEST()
target-ppc: Fix CPU migration from qemu-2.6 <-> later versions
ppc: Make uninorth interrupt swizzling identical to Grackle
target-ppc: fix index array of national digits
hw/char/spapr_vty: Return amount of free buffer entries in vty_can_receive()
ppc: BOOK3E: nothing should be done when MSR:PR is set
spapr: migration support for CAS-negotiated option vectors
tests/postcopy: Use KVM on ppc64 only if it is KVM-HV
* bonzini/tags/for-upstream:
scsi/esp: do not raise an interrupt when reading the FIFO register
nbd: Allow unmap and fua during write zeroes
cpu_ldst.h: use correct guest address parameter
David Gibson [Tue, 22 Nov 2016 23:26:38 +0000 (10:26 +1100)]
spapr: Fix 2.7<->2.8 migration of PCI host bridge
daa2369 "spapr_pci: Add a 64-bit MMIO window" subtly broke migration
from qemu-2.7 to the current version. It split the device's MMIO
window into two pieces for 32-bit and 64-bit MMIO.
The patch included backwards compatibility code to convert the old
property into the new format. However, the property value was also
transferred in the migration stream and compared with a (probably
unwise) VMSTATE_EQUAL. So, the "raw" value from 2.7 is compared to
the new style converted value from (pre-)2.8 giving a mismatch and
migration failure.
Along with the actual field that caused the breakage, there are
several other ill-advised VMSTATE_EQUAL()s. To fix forwards
migration, we read the values in the stream into scratch variables and
ignore them, instead of comparing for equality. To fix backwards
migration, we populate those scratch variables in pre_save() with
adjusted values to match the old behaviour.
To permit the eventual possibility of removing this cruft from the
stream, we only include these compatibility fields if a new
'pre-2.8-migration' property is set. We clear it on the pseries-2.8
machine type, which obviously can't be migrated backwards, but set it
on earlier machine type versions.
The commit above corrected a migration breakage between qemu-2.7 and
qemu-2.8. However it did so by advancing the migration version for
the PCI host bridge, which obviously breaks migration backwards to
earlier qemu versions.
Although it's not totally essential, we'd like to maintain the
possibility for backwards migration, so revert the change in
preparation for a better fix.
David Gibson [Mon, 21 Nov 2016 05:29:30 +0000 (16:29 +1100)]
target-ppc: Allow eventual removal of old migration mistakes
Until very recently, the vmstate for ppc cpus included some poorly
thought out VMSTATE_EQUAL() components, that can easily break
migration compatibility, and did so between qemu-2.6 and later
versions. A hack was recently added which fixes this migration
breakage, but it leaves the unhelpful cruft of these fields in the
migration stream.
This patch adds a new cpu property allowing these fields to be removed
from the stream entirely. For the pseries-2.8 machine type - which
comes after the fix - and for all non-pseries machine types - which
aren't mature enough to care about cross-version migration - we remove
the fields from the stream.
For pseries-2.7 and earlier, The migration hack remains in place,
allowing backwards and forwards migration with the older machine
types.
This restricts the migration compatibility cruft to older machine
types, and at least opens the possibility of eventually deprecating
and removing it entirely.
David Gibson [Sun, 20 Nov 2016 23:50:02 +0000 (10:50 +1100)]
migration: Add VMSTATE_UINTTL_TEST()
include/migration/cpu.h defines VMSTATE_UINTTL() and several variants
for migrating target_ulong fields. It's defined in terms of
VMSTATE_UINT32() or VMSTATE_UINT64() as appropriate.
It doesn't, however, include a VMSTATE_UINTTL_TEST() variant, which
I'm going to need shortly. So, add it.
David Gibson [Mon, 21 Nov 2016 05:28:12 +0000 (16:28 +1100)]
target-ppc: Fix CPU migration from qemu-2.6 <-> later versions
When migration for target-ppc was converted to vmstate, several
VMSTATE_EQUAL() checks were foolishly included of things that really
should be internal state. Specifically we verified equality of the
insns_flags and insns_flags2 fields, which are used within TCG to
determine which groups of instructions are available on this cpu
model. Between qemu-2.6 and qemu-2.7 we made some changes to these
classes which broke migration.
This path fixes migration both forwards and backwards. On migration
from 2.6 to later versions we import the fields into teporary
variables, which we then ignore. In migration backwards, we populate
the temporary fields from the runtime fields, but mask out the bits
which were added after qemu-2.6, allowing the VMSTATE_EQUAL in
qemu-2.6 to accept the stream.
ppc: Make uninorth interrupt swizzling identical to Grackle
It's currently broken as it uses an incorrect shift, it tries
to use the slot number but uses the top bits of the bus number
instead.
Note: Neither implementation matches what OpenBIOS ends up putting
in the device-tree either, which will have to be fixed separately.
This is not quite correct for modelling a real Mac since Apple
tend to tie all 4 interrupt lines of a slot together and have
separate interrupts for every slot and every motherboard devices
going straight to the PIC but we'll sort that out later.
Thomas Huth [Fri, 18 Nov 2016 09:09:37 +0000 (10:09 +0100)]
hw/char/spapr_vty: Return amount of free buffer entries in vty_can_receive()
The can_receive() callbacks of the character devices should return
the amount of characters that can be accepted at once, not just a
boolean value (which rather means only one character at a time).
Vladimir Svoboda [Thu, 17 Nov 2016 13:49:48 +0000 (14:49 +0100)]
ppc: BOOK3E: nothing should be done when MSR:PR is set
The server architecture (BOOK3S) specifies that any instruction that
sets MSR:PR will also set MSR:EE, IR and DR.
However there is no such behavior specification for the embedded
architecture (BOOK3E).
Michael Roth [Fri, 18 Nov 2016 01:40:27 +0000 (19:40 -0600)]
spapr: migration support for CAS-negotiated option vectors
With the additional of the OV5_HP_EVT option vector, we now have
certain functionality (namely, memory unplug) that checks at run-time
for whether or not the guest negotiated the option via CAS. Because
we don't currently migrate these negotiated values, we are unable
to unplug memory from a guest after it's been migrated until after
the guest is rebooted and CAS-negotiation is repeated.
This patch fixes this by adding CAS-negotiated options to the
migration stream. We do this using a subsection, since the
negotiated value of OV5_HP_EVT is the only option currently needed
to maintain proper functionality for a running guest.
Thomas Huth [Wed, 16 Nov 2016 08:39:31 +0000 (09:39 +0100)]
tests/postcopy: Use KVM on ppc64 only if it is KVM-HV
The ppc64 postcopy test does not work with KVM-PR, and it is also
causing annoying warning messages when run on a x86 host. So let's
use KVM here only if we know that we're running with KVM-HV (which
automatically also means that we're running on a ppc64 host), and
fall back to TCG otherwise.
Eric Blake [Thu, 17 Nov 2016 20:13:54 +0000 (14:13 -0600)]
nbd: Allow unmap and fua during write zeroes
Commit fa778fff wired up support to send the NBD_CMD_WRITE_ZEROES,
but forgot to inform the block layer that FUA unmapping of zeroes is
supported. Without BDRV_REQ_MAY_UNMAP listed as a supported flag,
the block layer will always insist on the NBD layer passing
NBD_CMD_FLAG_NO_HOLE, resulting in the server always allocating
things even when it was desired to let the server punch holes.
Similarly, failing to set BDRV_REQ_FUA means that the client may
send unnecessary NBD_CMD_FLUSH when it could have instead used the
NBD_CMD_FLAG_FUA bit.
Bobby Bingham [Sun, 13 Nov 2016 05:05:23 +0000 (23:05 -0600)]
cpu_ldst.h: use correct guest address parameter
In the user emulation code path, tlb_vaddr_to_host erronesously passed
vaddr as the guest address to be translated, instead of addr, the parameter
which actually contained the guest address.
This resulted in incorrect addresses being used when emulating block copy
(mvc/mvpg) and block clear (xc) instructions for the s390x target.
Stefan Hajnoczi [Tue, 22 Nov 2016 19:30:39 +0000 (19:30 +0000)]
Merge remote-tracking branch 'sstabellini/tags/xen-20161122-tag' into staging
Xen 2016/11/22
# gpg: Signature made Tue 22 Nov 2016 06:41:23 PM GMT
# gpg: using RSA key 0x894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <[email protected]>"
# gpg: aka "Stefano Stabellini <[email protected]>"
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90
* sstabellini/tags/xen-20161122-tag:
xen: attach pvusb usb bus to backend qdev
xen: create qdev for each backend device
qdev: add function qdev_set_id()
xen: add an own bus for xen backend devices
xen: fix ioreq handling
Message-id: alpine.DEB.2.10.1611221037010.21858@sstabellini-ThinkPad-X260 Signed-off-by: Stefan Hajnoczi <[email protected]>
Stefan Hajnoczi [Tue, 22 Nov 2016 19:30:03 +0000 (19:30 +0000)]
Merge remote-tracking branch 'kwolf/tags/for-upstream' into staging
Block layer patches for 2.8.0-rc1
# gpg: Signature made Tue 22 Nov 2016 03:55:38 PM GMT
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <[email protected]>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* kwolf/tags/for-upstream:
block: Pass unaligned discard requests to drivers
block: Return -ENOTSUP rather than assert on unaligned discards
block: Let write zeroes fallback work even with small max_transfer
qcow2: Inform block layer about discard boundaries
Juergen Gross [Tue, 22 Nov 2016 06:10:59 +0000 (07:10 +0100)]
xen: attach pvusb usb bus to backend qdev
Attach the usb bus of a new pvusb controller to the qdev associated
with the Xen backend. Any device connected to that controller can now
specify the bus and port directly via its properties.
Juergen Gross [Tue, 22 Nov 2016 06:10:58 +0000 (07:10 +0100)]
xen: create qdev for each backend device
Create a qdev plugged to the xen-sysbus for each new backend device.
This device can be used as a parent for all needed devices of that
backend. The id of the new device will be "xen-<type>-<dev>" with
<type> being the xen backend type (e.g. "qdisk") and <dev> the xen
backend number of the type under which it is to be found in xenstore.
projects / qemu.git / log