Andrew Jeffery [Wed, 16 Mar 2016 17:06:00 +0000 (17:06 +0000)]
hw/timer: Add ASPEED timer device model
Implement basic ASPEED timer functionality for the AST2400 SoC[1]: Up to
8 timers can independently be configured, enabled, reset and disabled.
Some hardware features are not implemented, namely clock value matching
and pulse generation, but the implementation is enough to boot the Linux
kernel configured with aspeed_defconfig.
Wei Huang [Wed, 16 Mar 2016 17:05:59 +0000 (17:05 +0000)]
arm: virt: Move machine class init code to the abstract machine type
This patch moves the common class initialization code from
"virt-2.6" to the new abstract class. An empty property is added to
"virt-2.6" machine. In the meanwhile, related funtions are renamed
to "virt_2_6_*" for consistency.
Wei Huang [Wed, 16 Mar 2016 17:05:59 +0000 (17:05 +0000)]
arm: virt: Add an abstract ARM virt machine type
In preparation for future ARM virt machine types, this patch creates
an abstract type for all ARM machines. The current machine type in
QEMU (i.e. "virt") is renamed to "virt-2.6", whose naming scheme is
similar to other architectures. For the purpose of backward compatibility,
"virt" is converted to an alias, pointing to "virt-2.6". With this patch,
"qemu -M ?" lists the following virtual machine types along with others:
virt QEMU 2.6 ARM Virtual Machine (alias of virt-2.6)
virt-2.6 QEMU 2.6 ARM Virtual Machine
Sergey Sorokin [Wed, 16 Mar 2016 17:05:58 +0000 (17:05 +0000)]
target-arm: Fix translation level on early translation faults
Qemu reports translation fault on 1st level instead of 0th level in case of
AArch64 address translation if the translation table walk is disabled or
the address is in the gap between the two regions.
Peter Maydell [Wed, 16 Mar 2016 17:05:58 +0000 (17:05 +0000)]
target-arm: Implement MRS (banked) and MSR (banked) instructions
Starting with the ARMv7 Virtualization Extensions, the A32 and T32
instruction sets provide instructions "MSR (banked)" and "MRS
(banked)" which can be used to access registers for a mode other
than the current one:
* R<m>_<mode>
* ELR_hyp
* SPSR_<mode>
Jens Wiklander [Wed, 16 Mar 2016 17:05:58 +0000 (17:05 +0000)]
loader: Fix incorrect parameter name in load_image_mr() macro
Fix a typo in the load_image_mr() macro: 'mr' was written when
the parameter name is '_mr'. (This had no visible effects since
the single use of the macro used 'mr' as the argument.)
Peter Maydell [Tue, 23 Feb 2016 14:18:31 +0000 (14:18 +0000)]
update-linux-headers.sh: Fake types.h doesn't need to include anything
We have a fake linux/types.h which we create in update-linux-headers.h.
Now that every QEMU source file includes osdep.h, this fake header
doesn't need to include anything at all.
Peter Maydell [Tue, 23 Feb 2016 14:18:30 +0000 (14:18 +0000)]
include/config.h: Remove
include/config.h just includes config-target.h (and used to also
include config-host.h).
It is now obsolete and unused, because osdep.h does this job, so
remove it.
Peter Maydell [Tue, 23 Feb 2016 14:18:29 +0000 (14:18 +0000)]
slirp/slirp.h: Remove now-empty #ifdefs
After automatic cleanup to remove unnecessary #includes of headers that
osdep.h provides, slirp.h has a few now unnecessary #ifdef/#endif pairs;
remove them.
Peter Maydell [Wed, 16 Mar 2016 10:38:14 +0000 (10:38 +0000)]
Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2016-03-16' into staging
Monitor patches for 2016-03-16
# gpg: Signature made Wed 16 Mar 2016 09:47:23 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <[email protected]>"
# gpg: aka "Markus Armbruster <[email protected]>"
* remotes/armbru/tags/pull-monitor-2016-03-16:
qdev-monitor: add missing aliases for virtio device classes
qdev-monitor: sort alias table by typename
qdev-monitor: improve error message when alias device is unavailable
Peter Maydell [Wed, 16 Mar 2016 10:09:26 +0000 (10:09 +0000)]
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.6-20160316' into staging
ppc patch queue for 2016-03-16
Accumulated patches for target-ppc, pseries machine type and related
devices. As we are now in soft freeze, these are mostly fixes.
* Fix KVM migration for several SPRs that qemu didn't handle
* Clean up handling of SDR1, which allows a fix to the gdbstub
* Fix a race in spapr_rng
* Fix a bug with multifunction hotplug
The exception is the 7 patches to allow EEH on spapr-pci-host-bridge
devices (rather than the special and poorly designed
spapr-vfio-pci-host-bridge device). I believe these are low risk of
breaking non-EEH cases, and EEH cases were little used in practice
previously (since libvirt did not support the special device amongst
other things). It did have a draft posted before the soft freeze,
removes a very ugly VFIO interface, and removes device we'd like to
deprecate sooner rather than later. So, I'm hoping we can squeeze
these in during the soft freeze.
This includes two patches to the VFIO code, which Alex Williamson has
indicated he's ok with coming through my tree.
# gpg: Signature made Wed 16 Mar 2016 05:04:52 GMT using RSA key ID 20D9B392
# gpg: Good signature from "David Gibson <[email protected]>"
# gpg: aka "David Gibson (Red Hat) <[email protected]>"
# gpg: aka "David Gibson (ozlabs.org) <[email protected]>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.6-20160316:
vfio: Eliminate vfio_container_ioctl()
spapr_pci: Remove finish_realize hook
spapr_pci: (Mostly) remove spapr-pci-vfio-host-bridge
spapr_pci: Allow EEH on spapr-pci-host-bridge
spapr_pci: Eliminate class callbacks
spapr_pci: Switch to vfio_eeh_as_op() interface
vfio: Start improving VFIO/EEH interface
spapr_rng: fix race with main loop
target-ppc: Eliminate kvmppc_kern_htab global
target-ppc: Add helpers for updating a CPU's SDR1 and external HPT
target-ppc: Split out SREGS get/put functions
spapr_pci: fix multifunction hotplug
target-ppc: Add PVR for POWER8NVL processor
ppc: Add a few more P8 PMU SPRs
ppc: Fix migration of the TAR SPR
ppc: Define the PSPB register on POWER8
error: ensure errno detail is printed with error_abort
When &error_abort is passed in, the error reporting code
will print the current error message and then abort() the
process. Unfortunately at the time it aborts, we've not
yet appended the errno detail. This makes debugging certain
problems significantly harder as the log is incomplete.
Peter Maydell [Wed, 16 Mar 2016 09:27:58 +0000 (09:27 +0000)]
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi: minor fix
Since previous pull acpi test triggers warnings,
fix it up.
Signed-off-by: Michael S. Tsirkin <[email protected]>
# gpg: Signature made Tue 15 Mar 2016 21:26:38 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <[email protected]>"
# gpg: aka "Michael S. Tsirkin <[email protected]>"
* remotes/mst/tags/for_upstream:
acpi-test: update UID for GSI links
Sascha Silbe [Thu, 18 Feb 2016 21:44:14 +0000 (22:44 +0100)]
qdev-monitor: add missing aliases for virtio device classes
virtio-{blk,balloon,net,serial} are aliases for their actual,
architecture-dependent implementations (*-ccw on s390x, *-pci on other
architectures supporting virtio). This makes it a lot easier to craft
qemu invocations that work on all supported architectures. Complete
the set to cover all existing non-abstract virtio device classes.
For virtio-balloon, only the CCW implementation was missing.
Sascha Silbe [Thu, 18 Feb 2016 21:44:12 +0000 (22:44 +0100)]
qdev-monitor: improve error message when alias device is unavailable
When trying to instantiate an alias that points to a device class that
doesn't exist, the error message looks like qemu misunderstood the
request:
$ s390x-softmmu/qemu-system-s390x -device virtio-gpu
qemu-system-s390x: -device virtio-gpu: 'virtio-gpu-ccw' is not a valid
device model name
Special-case the error message to make it explicit that alias
expansion is going on:
$ s390x-softmmu/qemu-system-s390x -device virtio-gpu
qemu-system-s390x: -device virtio-gpu: 'virtio-gpu' (alias
'virtio-gpu-ccw') is not a valid device model name
David Gibson [Wed, 9 Mar 2016 00:57:20 +0000 (11:57 +1100)]
vfio: Eliminate vfio_container_ioctl()
vfio_container_ioctl() was a bad interface that bypassed abstraction
boundaries, had semantics that sat uneasily with its name, and was unsafe
in many realistic circumstances. Now that spapr-pci-vfio-host-bridge has
been folded into spapr-pci-host-bridge, there are no more users, so remove
it.
David Gibson [Mon, 29 Feb 2016 06:20:00 +0000 (17:20 +1100)]
spapr_pci: Remove finish_realize hook
Now that spapr-pci-vfio-host-bridge is reduced to just a stub, there is
only one implementation of the finish_realize hook in sPAPRPHBClass. So,
we can fold that implementation into its (single) caller, and remove the
hook. That's the last thing left in sPAPRPHBClass, so that can go away as
well.
Now that the regular spapr-pci-host-bridge can handle EEH, there are only
two things that spapr-pci-vfio-host-bridge does differently:
1. automatically sizes its DMA window to match the host IOMMU
2. checks if the attached VFIO container is backed by the
VFIO_SPAPR_TCE_IOMMU type on the host
(1) is not particularly useful, since the default window used by the
regular host bridge will work with the host IOMMU configuration on all
current systems anyway.
Plus, automatically changing guest visible configuration (such as the DMA
window) based on host settings is generally a bad idea. It's not
definitively broken, since spapr-pci-vfio-host-bridge is only supposed to
support VFIO devices which can't be migrated anyway, but still.
(2) is not really useful, because if a guest tries to configure EEH on a
different host IOMMU, the first call will fail and that will be that.
It's possible there are scripts or tools out there which expect
spapr-pci-vfio-host-bridge, so we don't remove it entirely. This patch
reduces it to just a stub for backwards compatibility.
David Gibson [Mon, 29 Feb 2016 06:19:42 +0000 (17:19 +1100)]
spapr_pci: Allow EEH on spapr-pci-host-bridge
Now that the EEH code is independent of the special
spapr-vfio-pci-host-bridge device, we can allow it on all spapr PCI
host bridges instead. We do this by changing spapr_phb_eeh_available()
to be based on the vfio_eeh_as_ok() call instead of the host bridge class.
Because the value of vfio_eeh_as_ok() can change with devices being
hotplugged or unplugged, this can potentially lead to some strange edge
cases where the guest starts using EEH, then it starts failing because
of a change in status.
However, it's not really any worse than the current situation. Cases that
would have worked previously will still work (i.e. VFIO devices from at
most one VFIO IOMMU group per vPHB), it's just that it's no longer
necessary to use spapr-vfio-pci-host-bridge with the groupid pre-specified.
David Gibson [Mon, 29 Feb 2016 06:45:05 +0000 (17:45 +1100)]
spapr_pci: Eliminate class callbacks
The EEH operations in the spapr-vfio-pci-host-bridge no longer rely on the
special groupid field in sPAPRPHBVFIOState. So we can simplify, removing
the class specific callbacks with direct calls based on a simple
spapr_phb_eeh_enabled() helper. For now we implement that in terms of
a boolean in the class, but we'll continue to clean that up later.
On its own this is a rather strange way of doing things, but it's a useful
intermediate step to further cleanups.
David Gibson [Wed, 9 Mar 2016 00:56:06 +0000 (11:56 +1100)]
vfio: Start improving VFIO/EEH interface
At present the code handling IBM's Enhanced Error Handling (EEH) interface
on VFIO devices operates by bypassing the usual VFIO logic with
vfio_container_ioctl(). That's a poorly designed interface with unclear
semantics about exactly what can be operated on.
In particular it operates on a single vfio container internally (hence the
name), but takes an address space and group id, from which it deduces the
container in a rather roundabout way. groupids are something that code
outside vfio shouldn't even be aware of.
This patch creates new interfaces for EEH operations. Internally we
have vfio_eeh_container_op() which takes a VFIOContainer object
directly. For external use we have vfio_eeh_as_ok() which determines
if an AddressSpace is usable for EEH (at present this means it has a
single container with exactly one group attached), and vfio_eeh_as_op()
which will perform an operation on an AddressSpace in the unambiguous case,
and otherwise returns an error.
This interface still isn't great, but it's enough of an improvement to
allow a number of cleanups in other places.
The consequence is that entropy_available() may be called before the vCPU
thread could even queue the request: depending on the scheduling, it may
happen that entropy_available() does not call random_recv()->qemu_sem_post().
The vCPU thread will then sleep forever in h_random()->qemu_sem_wait().
This could not happen before 60253ed1e6ec because entropy_available() used
to call random_recv() unconditionally.
This patch ensures the lock is held to avoid the race.
David Gibson [Tue, 8 Mar 2016 00:35:15 +0000 (11:35 +1100)]
target-ppc: Eliminate kvmppc_kern_htab global
fa48b43 "target-ppc: Remove hack for ppc_hash64_load_hpte*() with HV KVM"
purports to remove a hack in the handling of hash page tables (HPTs)
managed by KVM instead of qemu. However, it actually went in the wrong
direction.
That patch requires anything looking for an external HPT (that is one not
managed by the guest itself) to check both env->external_htab (for a qemu
managed HPT) and kvmppc_kern_htab (for a KVM managed HPT). That's a
problem because kvmppc_kern_htab is local to mmu-hash64.c, but some places
which need to check for an external HPT are outside that, such as
kvm_arch_get_registers(). The latter was subtly broken by the earlier
patch such that gdbstub can no longer access memory.
Basically a KVM managed HPT is much more like a qemu managed HPT than it is
like a guest managed HPT, so the original "hack" was actually on the right
track.
This partially reverts fa48b43, so we again mark a KVM managed external HPT
by putting a special but non-NULL value in env->external_htab. It then
goes further, using that marker to eliminate the kvmppc_kern_htab global
entirely. The ppc_hash64_set_external_hpt() helper function is extended
to set that marker if passed a NULL value (if you're setting an external
HPT, but don't have an actual HPT to set, the assumption is that it must
be a KVM managed HPT).
This also has some flow-on changes to the HPT access helpers, required by
the above changes.
David Gibson [Tue, 8 Mar 2016 00:33:46 +0000 (11:33 +1100)]
target-ppc: Add helpers for updating a CPU's SDR1 and external HPT
When a Power cpu with 64-bit hash MMU has it's hash page table (HPT)
pointer updated by a write to the SDR1 register we need to update some
derived variables. Likewise, when the cpu is configured for an external
HPT (one not in the guest memory space) some derived variables need to be
updated.
Currently the logic for this is (partially) duplicated in ppc_store_sdr1()
and in spapr_cpu_reset(). In future we're going to need it in some other
places, so make some common helpers for this update.
In addition the new ppc_hash64_set_external_hpt() helper also updates
SDR1 in KVM - it's not updated by the normal runtime KVM <-> qemu CPU
synchronization. In a sense this belongs logically in the
ppc_hash64_set_sdr1() helper, but that is called from
kvm_arch_get_registers() so can't itself call cpu_synchronize_state()
without infinite recursion. In practice this doesn't matter because
the only other caller is TCG specific.
Currently there aren't situations where updating SDR1 at runtime in KVM
matters, but there are going to be in future.
David Gibson [Wed, 9 Mar 2016 00:58:33 +0000 (11:58 +1100)]
target-ppc: Split out SREGS get/put functions
Currently the getting and setting of Power MMU registers (sregs) take up
large inline chunks of the kvm_arch_get_registers() and
kvm_arch_put_registers() functions. Especially since there are two
variants (for Book-E and Book-S CPUs), only one of which will be used in
practice, this is pretty hard to read.
This patch splits these out into helper functions for clarity. No
functional change is expected.
Michael Roth [Thu, 3 Mar 2016 21:55:36 +0000 (15:55 -0600)]
spapr_pci: fix multifunction hotplug
Since 3f1e147, QEMU has adopted a convention of supporting function
hotplug by deferring hotplug events until func 0 is hotplugged.
This is likely how management tools like libvirt would expose
such support going forward.
Since sPAPR guests rely on per-func events rather than
slot-based, our protocol has been to hotplug func 0 *first* to
avoid cases where devices appear within guests without func 0
present to avoid undefined behavior.
To remain compatible with new convention, defer hotplug in a
similar manner, but then generate events in 0-first order as we
did in the past. Once func 0 present, fail any attempts to plug
additional functions (as we do with PCIe).
For unplug, defer unplug operations in a similar manner, but
generate unplug events such that function 0 is removed last in guest.
This adds a new POWER8+NVLink CPU PVR which core is identical to POWER8
but has a different PVR. The only available machine now has PVR
pvr 004c 0100 so this defines "POWER8NVL" alias as v1.0.
The corresponding kernel commit is
https://github.com/torvalds/linux/commit/ddee09c099c3
"powerpc: Add PVR for POWER8NVL processor"
Thomas Huth [Wed, 2 Mar 2016 20:19:21 +0000 (21:19 +0100)]
ppc: Fix migration of the TAR SPR
The TAR special purpose register currently does not get migrated
under KVM because it does not get synchronized with the kernel.
Use spr_register_kvm() instead of spr_register() to fix this issue.
Thomas Huth [Wed, 2 Mar 2016 20:19:20 +0000 (21:19 +0100)]
ppc: Define the PSPB register on POWER8
POWER8 / PowerISA 2.07 has a new special purpose register called PSPB
("Problem State Priority Boost Register"). The contents of this register
are currently lost during migration. To be able to migrate this register,
too, we've got to define this SPR along with the other SPRs of POWER8.
Pavel Dovgalyuk [Thu, 10 Mar 2016 11:56:09 +0000 (14:56 +0300)]
icount: decouple warp calls
qemu_clock_warp function is called to update virtual clock when CPU
is sleeping. This function includes replay checkpoint to make execution
deterministic in icount mode.
Record/replay module flushes async event queue at checkpoints.
Some of the events (e.g., block devices operations) include interaction
with hardware. E.g., APIC polled by block devices sets one of IRQ flags.
Flag to be set depends on currently executed thread (CPU or iothread).
Therefore in replay mode we have to process the checkpoints in the same thread
as they were recorded.
qemu_clock_warp function (and its checkpoint) may be called from different
thread. This patch decouples two different execution cases of this function:
call when CPU is sleeping from iothread and call from cpu thread to update
virtual clock.
First task is performed by qemu_start_warp_timer function. It sets warp
timer event to the moment of nearest pending virtual timer.
Second function (qemu_account_warp_timer) is called from cpu thread
before execution of the code. It advances virtual clock by adding the length
of period while CPU was sleeping.
Pavel Dovgalyuk [Mon, 14 Mar 2016 07:44:36 +0000 (10:44 +0300)]
replay: character devices
This patch implements record and replay of character devices.
It records chardevs communication in replay mode. Recorded information
include data read from backend and counter of bytes written
from frontend to backend to preserve frontend internal state.
If character device was configured through the command line in record mode,
then in replay mode it should be also added to command line. Backend of
the character device could be changed in replay mode.
Replaying of devices that perform ioctl and get_msgfd operations is not
supported.
gdbstub which also acts as a backend is not recorded to allow controlling
the replaying through gdb. Monitor backends are also not recorded.
Paolo Bonzini [Wed, 9 Mar 2016 17:14:01 +0000 (18:14 +0100)]
exec: fix early return from ram_block_add
After reporting an error, ram_block_add was going on with the registration
of the RAMBlock. The visible effect is that it unlocked the ramlist
mutex twice.
exec: Fix memory allocation when memory path isn't on hugetlbfs
gethugepagesize() works reliably only when its argument is on
hugetlbfs. When it's not, it returns the filesystem's "optimal
transfer block size", which may or may not be the actual page size
you'll get when you mmap().
If the value is too small or not a power of two, we fail
qemu_ram_mmap()'s assertions. These were added in commit 794e8f3
(v2.5.0). The bug's impact before that is currently unknown. Seems
fairly unlikely at least when the normal page size is 4KiB.
Else, if the value is too large, we align more strictly than
necessary.
gethugepagesize() goes back to commit c902760 (v0.13). That commit
clearly intended gethugepagesize() to be used on hugetlbfs only. Not
only was it named accordingly, it also printed a warning when used on
anything else. However, the commit neglected to spell out the
restriction in user documentation of -mem-path.
Commit bfc2a1a (v2.5.0) dropped the warning as bogus "because QEMU
functions perfectly well with the path on a regular tmpfs filesystem".
It sure does when you're sufficiently lucky. In my testing, I was
lucky, too.
Fix by switching to qemu_fd_getpagesize(). Rename the variable
holding its result from hpagesize to page_size.
exec: Fix memory allocation when memory path names new file
Commit 8d31d6b extended file_ram_alloc() to accept file names in
addition to directory names. Even though it passes O_CREAT to open(),
it actually works only for existing files. Reproducer adapted from
the commit's qemu-doc.texi update:
$ qemu-system-x86_64 -object memory-backend-file,size=2M,mem-path=/dev/hugepages/my-shmem-file,id=mb1
qemu-system-x86_64: -object memory-backend-file,size=2M,mem-path=/dev/hugepages/my-shmem-file,id=mb1: failed to get page size of file /dev/hugepages/my-shmem-file: No such file or directory
This is because we first get the page size for @path, then open the
actual file. Unwise even before the flawed commit, because the
directory could change in between, invalidating the page size.
Unlikely to bite in practice.
Rearrange the code to create the file (if necessary) before getting
its page size. Carefully avoid TOCTTOU conditions with a method
suggested by Paolo Bonzini.
While there, replace "hugepages" by "guest RAM" in error messages,
because host memory backends can be used for purposes other than huge
pages, e.g. /dev/shm/ shared memory. Help text of -mem-path agrees.
Rita Sinha [Mon, 7 Mar 2016 19:22:05 +0000 (00:52 +0530)]
kvm: x86: q35: Add support for -machine kernel_irqchip=split for q35
The split IRQ chip mode via KVM_CAP_SPLIT_IRQCHIP was introduced with commit 15eafc2e60 but was broken for q35. This patch makes kernel_irqchip=split
functional for q35.
Peter Maydell [Tue, 15 Mar 2016 17:09:52 +0000 (17:09 +0000)]
Merge remote-tracking branch 'remotes/thibault/tags/samuel-thibault' into staging
slirp: Adding IPv6 support to Qemu -net user mode
# gpg: Signature made Tue 15 Mar 2016 16:06:03 GMT using RSA key ID FB6B2F1D
# gpg: Good signature from "Samuel Thibault <[email protected]>"
# gpg: aka "Samuel Thibault <[email protected]>"
# gpg: aka "Samuel Thibault <[email protected]>"
# gpg: aka "Samuel Thibault <[email protected]>"
# gpg: aka "Samuel Thibault <[email protected]>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 900C B024 B679 31D4 0F82 304B D017 8C76 7D06 9EE6
# Subkey fingerprint: F632 74CD C630 0873 CB3D 29D9 E3E5 1CE8 FB6B 2F1D
* remotes/thibault/tags/samuel-thibault:
slirp: Add IPv6 support to the TFTP code
qapi-schema, qemu-options & slirp: Adding Qemu options for IPv6 addresses
slirp: Adding IPv6 address for DNS relay
slirp: Handle IPv6 in TCP functions
slirp: Reindent after refactoring
slirp: Generalizing and neutralizing various TCP functions before adding IPv6 stuff
slirp: Factorizing tcpiphdr structure with an union
slirp: Adding IPv6 UDP support
slirp: Adding ICMPv6 error sending
slirp: Fix ICMP error sending
slirp: Adding IPv6, ICMPv6 Echo and NDP autoconfiguration
Peter Maydell [Tue, 15 Mar 2016 16:43:48 +0000 (16:43 +0000)]
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
vhost, virtio, pci, pc, acpi
nvdimm work
sparse cpu id rework
ipmi enhancements
fixes all over the place
pxb option to tweak chassis number
Signed-off-by: Michael S. Tsirkin <[email protected]>
# gpg: Signature made Tue 15 Mar 2016 14:33:10 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <[email protected]>"
# gpg: aka "Michael S. Tsirkin <[email protected]>"
* remotes/mst/tags/for_upstream: (51 commits)
hw/acpi: fix GSI links UID
ipmi: add some local variables in ipmi_sdr_init
ipmi: remove the need of an ending record in the SDR table
ipmi: use a function to initialize the SDR table
ipmi: add a realize function to the device class
ipmi: add rsp_buffer_set_error() helper
ipmi: remove IPMI_CHECK_RESERVATION() macro
ipmi: replace IPMI_ADD_RSP_DATA() macro with inline helpers
ipmi: remove IPMI_CHECK_CMD_LEN() macro
MAINTAINERS: machine core
MAINTAINERS: Add an entry for virtio header files
pc: acpi: clarify why possible LAPIC entries must be present in MADT
pc: acpi: drop cpu->found_cpus bitmap
pc: acpi: create Processor and Notify objects only for valid lapics
pc: acpi: create MADT.lapic entries only for valid lapics
pc: acpi: SRAT: create only valid processor lapic entries
pc: acpi: cleanup qdev_get_machine() calls
machine: introduce MachineClass.possible_cpu_arch_ids() hook
pc: init pcms->apic_id_limit once and use it throughout pc.c
pc: acpi: remove NOP assignment
...
Thomas Huth [Tue, 15 Mar 2016 09:31:23 +0000 (10:31 +0100)]
slirp: Add IPv6 support to the TFTP code
Add the handler code for incoming TFTP packets to udp6_input(),
and make sure that the TFTP code can send packets with both,
udp_output() and udp6_output() by introducing a wrapper function
called tftp_udp_output().
Peter Maydell [Tue, 15 Mar 2016 15:51:06 +0000 (15:51 +0000)]
Merge remote-tracking branch 'remotes/berrange/tags/pull-io-next-2016-03-15-1' into staging
Merge I/O fixes
# gpg: Signature made Tue 15 Mar 2016 14:42:43 GMT using RSA key ID 15104FDF
# gpg: Good signature from "Daniel P. Berrange <[email protected]>"
# gpg: aka "Daniel P. Berrange <[email protected]>"
* remotes/berrange/tags/pull-io-next-2016-03-15-1:
io: stronger check for support for IPv4/6
Instead of just checking for bind(), also check whether
getaddrinfo can resolve IPv6 addresses. This catches
failure when travis runs QEMU builds inside minimal
docker containers
Peter Maydell [Tue, 15 Mar 2016 11:05:37 +0000 (11:05 +0000)]
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
X86 fixes
# gpg: Signature made Mon 14 Mar 2016 20:26:25 GMT using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <[email protected]>"
* remotes/ehabkost/tags/x86-pull-request:
kvm: Remove x2apic feature from CPU model when kernel_irqchip is off
hyperv: cpu hotplug fix with HyperV enabled
Yann Bordenave [Tue, 15 Mar 2016 09:31:22 +0000 (10:31 +0100)]
qapi-schema, qemu-options & slirp: Adding Qemu options for IPv6 addresses
This patch adds parameters to manage some new options in the qemu -net
command.
Slirp IPv6 address, network prefix, and DNS IPv6 address can be given in
argument to the qemu command.
Defaults parameters are respectively fec0::2, fec0::, /64 and fec0::3.
This patch adds an IPv6 address to the DNS relay. in6_equal_dns() is
developed using this Slirp attribute.
sotranslate_in/out/accept() are also updated to manage the IPv6 case so the
guest can be able to join the host using one of the Slirp addresses.
For now this only points to localhost. Further development will be needed to
automatically fetch the IPv6 address from resolv.conf, and announce this via
RDNSS.
This patch adds IPv6 case in TCP functions refactored by the last
patches.
This also adds IPv6 pseudo-header in tcpiphdr structure.
Finally, tcp_input() is called by ip6_input().
slirp: Generalizing and neutralizing various TCP functions before adding IPv6 stuff
Basically, this patch adds some switch in various TCP functions to
prepare them for the IPv6 case.
To have something to "switch" in tcp_input() and tcp_respond(), a new
argument is used to give them the sa_family of the addresses they are
working on.
This patch does not include the entailed reindentation, to make proofread
easier. Reindentation is adressed in the following no-op patch.
slirp: Factorizing tcpiphdr structure with an union
This patch factorizes the tcpiphdr structure to put the IPv4 fields in
an union, for addition of version 6 in further patch.
Using some macros, retrocompatibility of the existing code is assured.
This patch also fixes the SLIRP_MSIZE and margin computation in various
functions, and makes them compatible with the new tcpiphdr structure,
whose size will be bigger than sizeof(struct tcphdr) + sizeof(struct ip)
This adds the sin6 case in the fhost and lhost unions and related macros.
It adds udp6_input() and udp6_output().
It adds the IPv6 case in sorecvfrom().
Finally, udp_input() is called by ip6_input().
Yann Bordenave [Tue, 15 Mar 2016 09:31:19 +0000 (10:31 +0100)]
slirp: Adding ICMPv6 error sending
Adding icmp6_send_error to send ICMPv6 Error messages. This function is
simpler than the v4 version.
Adding some calls in various functions to send ICMP errors, when a
received packet is too big, or when its hop limit is 0.
slirp: Adding IPv6, ICMPv6 Echo and NDP autoconfiguration
This patch adds the functions needed to handle IPv6 packets. ICMPv6 and
NDP headers are implemented.
Slirp is now able to send NDP Router or Neighbor Advertisement when it
receives Router or Neighbor Solicitation. Using a 64bit-sized IPv6
prefix, the guest is now able to perform stateless autoconfiguration
(SLAAC) and to compute its IPv6 address.
This patch adds an ndp_table, mainly inspired by arp_table, to keep an
NDP cache and manage network address resolution.
Slirp regularly sends NDP Neighbor Advertisement, as recommended by the
RFC, to make the guest refresh its route.
This also adds ip6_cksum() to compute ICMPv6 checksums using IPv6
pseudo-header.
Some #define ETH_* are moved upper in slirp.h to make them accessible to
other slirp/*.h
Peter Maydell [Tue, 15 Mar 2016 09:13:06 +0000 (09:13 +0000)]
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Mon 14 Mar 2016 16:36:52 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <[email protected]>"
* remotes/kevin/tags/for-upstream: (40 commits)
iotests: Add test for QMP event rates
monitor: Use QEMU_CLOCK_VIRTUAL for the event queue in qtest mode
monitor: Separate QUORUM_REPORT_BAD events according to the node name
quorum: Fix crash in quorum_aio_cb()
iotests: Correct 081's reference output
block: Remove unused typedef of BlockDriverDirtyHandler
block: Move block dirty bitmap code to separate files
typedefs: Add BdrvDirtyBitmap
block: Include hbitmap.h in block.h
backup: Use Bitmap to replace "s->bitmap"
vpc: Use BB functions in .bdrv_create()
vmdk: Use BB functions in .bdrv_create()
vhdx: Use BB functions in .bdrv_create()
vdi: Use BB functions in .bdrv_create()
sheepdog: Use BB functions in .bdrv_create()
qed: Use BB functions in .bdrv_create()
qcow2: Use BB functions in .bdrv_create()
qcow: Use BB functions in .bdrv_create()
parallels: Use BB functions in .bdrv_create()
block: Introduce blk_set_allow_write_beyond_eof()
...
Lan Tianyu [Thu, 25 Feb 2016 15:15:12 +0000 (23:15 +0800)]
kvm: Remove x2apic feature from CPU model when kernel_irqchip is off
x2apic feature is in the kvm_default_props and automatically added to all
CPU models when KVM is enabled. But userspace devices don't support x2apic
which can't be enabled without the in-kernel irqchip. It will trigger
warning of "host doesn't support requested feature: CPUID.01H:ECX.x2apic
[bit 21]" when kernel_irqchip is off. This patch is to fix it via removing
x2apic feature when kernel_irqchip is off.
Denis V. Lunev [Mon, 22 Feb 2016 09:13:02 +0000 (12:13 +0300)]
hyperv: cpu hotplug fix with HyperV enabled
With Hyper-V enabled CPU hotplug stops working. The CPU appears
in device manager on Windows but does not appear in peformance
monitor and control panel.
The root of the problem is the following. Windows checks
HV_X64_CPU_DYNAMIC_PARTITIONING_AVAILABLE bit in CPUID. The
presence of this bit is enough to cure the situation.
The bit should be set when CPU hotplug is allowed for HyperV VM.
The check that hot_add_cpu callback is defined is enough from the
protocol point of view. Though this callback is defined almost
always thus there is no need to export that knowledge in the
other way.
We discriminate here between opcodes that are illegal in the current
cpu mode or with illegal arguments (such as modrm.mod == 3) and
encodings that are unknown (such as an unimplemented isa extension).
Paolo Bonzini [Wed, 2 Mar 2016 15:04:38 +0000 (16:04 +0100)]
target-i386: Fix addr16 prefix
While ADDSEG will only be false in 16-bit mode for LEA, it can be
false even in other cases when 16-bit addresses are obtained via
the 67h prefix in 32-bit mode. In this case, gen_lea_v_seg forgets
to add a nonzero FS or GS base if CS/DS/ES/SS are all zero. This
case is pretty rare but happens when booting Windows 95/98, and
this patch fixes it.
The bug is visible since commit d6a291498, but it was introduced
together with gen_lea_v_seg and it probably could be reproduced
with a "addr16 gs movsb" instruction as early as in commit ca2f29f555805d07fb0b9ebfbbfc4e3656530977.
In non-64-bit modes, the instruction always stores 16 bits.
But in 64-bit mode, when the destination is a register, the
instruction can write 32 or 64 bits.
Kevin Wolf [Mon, 14 Mar 2016 16:36:31 +0000 (17:36 +0100)]
Merge remote-tracking branch 'mreitz/tags/pull-block-for-kevin-2016-03-14-v2' into queue-block
Block patches for pi day, v2.
# gpg: Signature made Mon Mar 14 17:35:29 2016 CET using RSA key ID E838ACAD
# gpg: Good signature from "Max Reitz <[email protected]>"
* mreitz/tags/pull-block-for-kevin-2016-03-14-v2:
iotests: Add test for QMP event rates
monitor: Use QEMU_CLOCK_VIRTUAL for the event queue in qtest mode
monitor: Separate QUORUM_REPORT_BAD events according to the node name
quorum: Fix crash in quorum_aio_cb()
iotests: Correct 081's reference output
block: Remove unused typedef of BlockDriverDirtyHandler
block: Move block dirty bitmap code to separate files
typedefs: Add BdrvDirtyBitmap
block: Include hbitmap.h in block.h
backup: Use Bitmap to replace "s->bitmap"
Alberto Garcia [Thu, 10 Mar 2016 11:55:25 +0000 (13:55 +0200)]
monitor: Separate QUORUM_REPORT_BAD events according to the node name
The QUORUM_REPORT_BAD event is emitted whenever there's an I/O error
in a child of a Quorum device. This event is emitted at a maximum rate
of 1 per second. This means that an error in one of the children will
mask errors in the other children if they happen within the same 1
second interval.
This patch modifies qapi_event_throttle_equal() so QUORUM_REPORT_BAD
events are kept separately if they come from different children.
Alberto Garcia [Thu, 10 Mar 2016 11:55:24 +0000 (13:55 +0200)]
quorum: Fix crash in quorum_aio_cb()
quorum_aio_cb() emits the QUORUM_REPORT_BAD event if there's
an I/O error in a Quorum child. However sacb->aiocb must be
correctly initialized for this to happen. read_quorum_children() and
read_fifo_child() are not doing this, which results in a QEMU crash.
Fam Zheng [Tue, 8 Mar 2016 04:44:52 +0000 (12:44 +0800)]
backup: Use Bitmap to replace "s->bitmap"
"s->bitmap" tracks done sectors, we only check bit states without using any
iterator which HBitmap is good for. Switch to "Bitmap" which is simpler and
more memory efficient.
Meanwhile, rename it to done_bitmap, to reflect the intention.
Peter Maydell [Mon, 14 Mar 2016 16:22:17 +0000 (16:22 +0000)]
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
# gpg: Signature made Mon 14 Mar 2016 11:27:01 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <[email protected]>"
# gpg: aka "Stefan Hajnoczi <[email protected]>"
* remotes/stefanha/tags/tracing-pull-request:
trace: separate MMIO tracepoints from TB-access tracepoints
trace: include CPU index in trace_memory_region_*()
Kevin Wolf [Tue, 8 Mar 2016 14:57:05 +0000 (15:57 +0100)]
vpc: Use BB functions in .bdrv_create()
All users of the block layers are supposed to go through a BlockBackend.
The .bdrv_create() implementation is one such user, so this patch
converts it.
Kevin Wolf [Tue, 8 Mar 2016 14:57:05 +0000 (15:57 +0100)]
vmdk: Use BB functions in .bdrv_create()
All users of the block layers are supposed to go through a BlockBackend.
The .bdrv_create() implementation is one such user, so this patch
converts it.
Kevin Wolf [Tue, 8 Mar 2016 14:57:05 +0000 (15:57 +0100)]
vhdx: Use BB functions in .bdrv_create()
All users of the block layers are supposed to go through a BlockBackend.
The .bdrv_create() implementation is one such user, so this patch
converts it.
Kevin Wolf [Tue, 8 Mar 2016 14:57:05 +0000 (15:57 +0100)]
vdi: Use BB functions in .bdrv_create()
All users of the block layers are supposed to go through a BlockBackend.
The .bdrv_create() implementation is one such user, so this patch
converts it.
Kevin Wolf [Tue, 8 Mar 2016 14:57:05 +0000 (15:57 +0100)]
sheepdog: Use BB functions in .bdrv_create()
All users of the block layers are supposed to go through a BlockBackend.
The .bdrv_create() implementation is one such user, so this patch
converts it.
Kevin Wolf [Tue, 8 Mar 2016 14:57:05 +0000 (15:57 +0100)]
qed: Use BB functions in .bdrv_create()
All users of the block layers are supposed to go through a BlockBackend.
The .bdrv_create() implementation is one such user, so this patch
converts it.
Kevin Wolf [Tue, 8 Mar 2016 14:57:05 +0000 (15:57 +0100)]
qcow2: Use BB functions in .bdrv_create()
All users of the block layers are supposed to go through a BlockBackend.
The .bdrv_create() implementation is one such user, so this patch
converts it.
Kevin Wolf [Tue, 8 Mar 2016 14:57:05 +0000 (15:57 +0100)]
qcow: Use BB functions in .bdrv_create()
All users of the block layers are supposed to go through a BlockBackend.
The .bdrv_create() implementation is one such user, so this patch
converts it.
Kevin Wolf [Tue, 8 Mar 2016 14:57:05 +0000 (15:57 +0100)]
parallels: Use BB functions in .bdrv_create()
All users of the block layers are supposed to go through a BlockBackend.
The .bdrv_create() implementation is one such user, so this patch
converts it.
projects / qemu.git / log