Aurelien Jarno [Fri, 14 Jan 2011 19:39:18 +0000 (20:39 +0100)]
target-sh4: implement FPU exceptions
FPU exception support where not implemented on SH4. Implement them by
clearing the softfloat exceptions flags before an FP instruction (the
SH4 FPU also clear them before an instruction), and calling a function
to update the FPSCR register after an FP instruction. This function
update the corresponding FPSCR bits (both flags and cumulative flags)
and trigger exception if enabled.
Aurelien Jarno [Fri, 14 Jan 2011 19:39:17 +0000 (20:39 +0100)]
softfloat: fix default-NaN mode
When the default-NaN mode is enabled, it should return the default NaN
value, but it should anyway raise the invalid operation flag if one of
the operand is an sNaN.
I have checked that this behavior matches the ARM and SH4 manuals, as
well as real SH4 hardware.
Aurelien Jarno [Fri, 14 Jan 2011 19:39:17 +0000 (20:39 +0100)]
target-sh4: switch sh4 to softfloat
We need to be able to catch exceptions correctly and thus enable softfloat
on SH4.
As all machines except i386 and x86_64 are using softfloat, make it the
default and change the case to detect i386 and x86_64. Note that CRIS
doesn't have an FPU, so it can be configured with both softfloat-native
and softfloat.
Aurelien Jarno [Fri, 14 Jan 2011 19:21:22 +0000 (20:21 +0100)]
configure: fix broken test
Since commit d1807a4f836c27f6dc7061e53a834dd27f78e46a ./configure tries
to test files and directories with "test -f", which only test for regular
files. Test with "test -e", which looks for any kind of files.
This unbreak the configure script when not using a separate object
directory.
Paolo Bonzini [Thu, 23 Dec 2010 10:43:53 +0000 (11:43 +0100)]
do not pass bogus $(SRC_PATH) include paths to cc during configure
Non-existent -I paths are dropped silently by the compiler, but still
it is not polite to pass bogus options. Configure-time tests do not
need any include files from the source path, so only include -I flags
at make time (when they're properly expanded).
Paolo Bonzini [Thu, 23 Dec 2010 10:43:52 +0000 (11:43 +0100)]
test cc with the complete set of chosen flags
The "test the C compiler works ok" comes before a bunch of flags
are added for --cpu or just depending on the host. It helps
debugging if the test is done after these flags are (unconditionally)
added.
Paolo Bonzini [Thu, 23 Dec 2010 10:43:51 +0000 (11:43 +0100)]
fix sparse support (?)
I didn't test with sparse, but the old code using += before a variable
was set was wrong. Sparse support should probably be ripped out or
redone, but this at least keeps some sanity.
Sergei Gavrikov [Wed, 12 Jan 2011 13:57:18 +0000 (15:57 +0200)]
slirp: Use strcasecmp() to check tftp mode, tsize
According to RFC 1350 (TFTP Revision 2) the mode field can contain any
combination of upper and lower case; also RFC 2349 propagates that the
transfer size option ("tsize") is case in-sensitive too.
Current implementation of embedded TFTP server missed that what does
mess some TFTP clients. Fixed by using STRCASECMP(3) in the required
places.
Michael Walle [Wed, 5 Jan 2011 00:05:47 +0000 (01:05 +0100)]
audio: split sample conversion and volume mixing
Refactor the volume mixing, so it can be reused for capturing devices.
Additionally, it removes superfluous multiplications with the nominal
volume within the hardware voice code path.
Peter Maydell [Mon, 10 Jan 2011 13:11:24 +0000 (13:11 +0000)]
linux-user: Add configure check for linux/fiemap.h and IOC_FS_FIEMAP
Add a configure check for the existence of linux/fiemap.h and the
IOC_FS_FIEMAP ioctl. This fixes a compilation failure on Linux
systems which don't have that header file.
Aurelien Jarno [Tue, 11 Jan 2011 15:13:34 +0000 (16:13 +0100)]
target-sh4: fix fpu disabled/illegal exception
Illegal instructions in a slot delay should generate a slot illegal
instruction exception instead of an illegal instruction exception.
The current PC should be saved before generating such an exception,
but should not be corrected if in a delay slot, given it's already
done in the exception handler do_interrupt().
Aurelien Jarno [Thu, 6 Jan 2011 21:43:13 +0000 (22:43 +0100)]
slirp: fix unaligned access in bootp code
Slirp code tries to be smart an avoid data copy by using pointer to
the data. This solution leads to unaligned access, in this case
preq_addr, which is a 32-bit long structure. There is no real point
of avoiding data copy in a such case, as the value itself is smaller
or the same size as a pointer.
The patch replaces pointers to the preq_addr structure by the strcture
itself, and use the address 0.0.0.0 if no address has been requested
(this is not a valid address in such a request). It compares it with
htonl(0L) for correctness reasons, in case a code checker look for such
mistakes. It also uses memcpy() for copying the data, which takes care
of alignement issues.
This fixes an unaligned access on IA64 host while requesting a DHCP
address.
Aurelien Jarno [Thu, 6 Jan 2011 21:43:13 +0000 (22:43 +0100)]
tcg/arm: improve constant loading
Improve constant loading in two ways:
- On all ARM versions, it's possible to load 0xffffff00 = -0x100 using
the mvn rd, #0. Fix the conditions.
- On <= ARMv6 versions, where movw and movt are not available, load the
constants using mov and orr with rotations depending on the constant
to load. This is very useful for example to load constants where the
low byte is 0. This reduce the generated code size by about 7%.
Aurelien Jarno [Sun, 9 Jan 2011 22:53:45 +0000 (23:53 +0100)]
target-sh4: improve TLB
SH4 is using 16-bit instructions which means most of the constants are
loaded through a constant pool at the end of the subroutine. The same
memory page is therefore accessed in exec and read mode.
With the current implementation, a QEMU TLB entry is set to read or
read/write mode after an UTLB search and to exec mode after an ITLB
search, which causes a lot of TLB exceptions to switch from read or
read/write to exec and vice versa.
This patch optimizes that by already setting the QEMU TLB entry in read
or read/write mode when an UTLB entry is copied into ITLB (during an
ITLB miss). This improve the emulation speed by about 14%.
Aurelien Jarno [Sun, 9 Jan 2011 22:53:45 +0000 (23:53 +0100)]
target-sh4: implement writes to mmaped ITLB
Some Linux kernels seems to implement ITLB/UTLB flushing through by
writing all TLB entries through the memory mapped interface instead
of writing one to MMUCR.TI.
Implement memory mapped ITLB write interface so that such kernels can
boot. This fixes https://bugs.launchpad.net/bugs/700774 .
Aurelien Jarno [Thu, 6 Jan 2011 21:43:13 +0000 (22:43 +0100)]
tcg/arm: fix branch target change during code retranslation
QEMU uses code retranslation to restore the CPU state when an exception
happens. For it to work the retranslation must not modify the generated
code. This is what is currently implemented in ARM TCG.
However on CPU that don't have icache/dcache/memory synchronised like
ARM, this requirement is stronger and code retranslation must not modify
the generated code "atomically", as the cache line might be flushed
at any moment (interrupt, exception, task switching), even if not
triggered by QEMU. The probability for this to happen is very low, and
depends on cache size and associativiy, machine load, interrupts, so the
symptoms are might happen randomly.
This requirement is currently not followed in tcg/arm, for the
load/store code, which basically has the following structure:
1) tlb access code is written
2) conditional fast path code is written
3) branch is written with a temporary target
4) slow path code is written
5) branch target is updated
The cache lines corresponding to the retranslated code is not flushed
after code retranslation as the generated code is supposed to be the
same. However if the cache line corresponding to the branch instruction
is flushed between step 3 and 5, and is not flushed again before the
code is executed again, the branch target is wrong. In the guest, the
symptoms are MMU page fault at a random addresses, which leads to
kernel page fault or segmentation faults.
The patch fixes this issue by avoiding writing the branch target until
it is known, that is by writing only the branch instruction first, and
later only the offset.
This fixes booting linux guests on ARM hosts (tested: arm, i386, mips,
mipsel, sh4, sparc).
Aurelien Jarno [Sat, 8 Jan 2011 15:25:48 +0000 (16:25 +0100)]
Merge branch 'linux-user-for-upstream' of git://gitorious.org/qemu-maemo/qemu
* 'linux-user-for-upstream' of git://gitorious.org/qemu-maemo/qemu:
Remove dead code for ARM semihosting commandline handling
Fix commandline handling for ARM semihosted executables
linux-user: Fix incorrect NaN detection in ARM nwfpe emulation
softfloat: Implement floatx80_is_any_nan() and float128_is_any_nan()
linux-user: Implement FS_IOC_FIEMAP ioctl
linux-user: Support ioctls whose parameter size is not constant
linux-user: Implement sync_file_range{,2} syscalls
Fix commandline handling for ARM semihosted executables
Use the copy of the command line that loader_build_argptr() sets up in guest
memory as the command line to return from the ARM SYS_GET_CMDLINE semihosting
call. Previously we were using a pointer to memory which had already been
freed before the guest program started.
This fixes https://bugs.launchpad.net/qemu/+bug/673613 .
Peter Maydell [Thu, 6 Jan 2011 18:34:44 +0000 (18:34 +0000)]
linux-user: Fix incorrect NaN detection in ARM nwfpe emulation
The code in the linux-user ARM nwfpe emulation was incorrectly
checking only for quiet NaNs when it should have been checking
for any kind of NaN. This is probably because the code in
question was taken from the Linux kernel, whose copy of the
softfloat library had been modified so that float*_is_nan()
returned true for all NaNs, not just quiet ones. The qemu
equivalent function is float*_is_any_nan(), so use that.
NB that this code is really obsolete since nobody uses FPE
for actual arithmetic now; this is just cleanup following
the recent renaming of the NaN related functions.
Peter Maydell [Thu, 6 Jan 2011 15:04:18 +0000 (15:04 +0000)]
linux-user: Implement FS_IOC_FIEMAP ioctl
Implement the FS_IOC_FIEMAP ioctl using the new support for
custom handling of ioctls; this is needed because the struct
that is passed includes a variable-length array.
Peter Maydell [Thu, 6 Jan 2011 15:04:17 +0000 (15:04 +0000)]
linux-user: Support ioctls whose parameter size is not constant
Some ioctls (for example FS_IOC_FIEMAP) use structures whose size is
not constant. The generic argument conversion code in do_ioctl()
cannot handle this, so add support for implementing a special-case
handler for a particular ioctl which does the conversion itself.
Peter Maydell [Thu, 6 Jan 2011 19:37:55 +0000 (19:37 +0000)]
target-arm: wire up the softfloat flush_input_to_zero flag
Wire up the new softfloat support for flushing input denormals
to zero on ARM. The FPSCR FZ bit enables flush-to-zero for
both inputs and outputs, but the reporting of when inputs are
flushed to zero is via a separate IDC bit rather than the UFC
(underflow) bit used when output denormals are flushed to zero.
Peter Maydell [Thu, 6 Jan 2011 19:37:54 +0000 (19:37 +0000)]
target-arm: Set softfloat cumulative exc flags from correct FPSCR bits
When handling a write to the ARM FPSCR, set the softfloat cumulative
exception flags from the cumulative flags in the FPSCR, not the
exception-enable bits. Also don't apply a mask: vfp_exceptbits_to_host
will only look at the correct bits anyway.
Peter Maydell [Thu, 6 Jan 2011 19:37:53 +0000 (19:37 +0000)]
softfloat: Implement flushing input denormals to zero
Add support to softfloat for flushing input denormal float32 and float64
to zero. softfloat's existing 'flush_to_zero' flag only flushes denormals
to zero on output. Some CPUs need input denormals to be flushed before
processing as well. Implement this, using a new status flag to enable it
and a new exception status bit to indicate when it has happened. Existing
CPUs should be unaffected as there is no behaviour change unless the
mode is enabled.
Aurelien Jarno [Thu, 6 Jan 2011 18:53:56 +0000 (19:53 +0100)]
target-arm: fix SMMLA/SMMLS instructions
SMMLA and SMMLS are broken on both in normal and thumb mode, that is
both (different) implementations are wrong. They try to avoid a 64-bit
add for the rounding, which is not trivial if you want to support both
SMMLA and SMMLS with the same code.
The code below uses the same implementation for both modes, using the
code from the ARM manual. It also fixes the thumb decoding that was a
mix between normal and thumb mode.
This fixes the issues reported in
https://bugs.launchpad.net/qemu/+bug/629298
Blue Swirl [Thu, 6 Jan 2011 18:25:37 +0000 (18:25 +0000)]
block: delete a write-only variable
Avoid a warning with GCC 4.6.0:
/src/qemu/block.c: In function 'bdrv_img_create':
/src/qemu/block.c:2862:25: error: variable 'fmt' set but not used [-Werror=unused-but-set-variable]
Aurelien Jarno [Thu, 6 Jan 2011 14:38:19 +0000 (15:38 +0100)]
softfloat: use float{32,64,x80,128}_maybe_silence_nan()
Use float{32,64,x80,128}_maybe_silence_nan() instead of toggling the
sNaN bit manually. This allow per target implementation of sNaN to qNaN
conversion.
Aurelien Jarno [Thu, 6 Jan 2011 14:38:19 +0000 (15:38 +0100)]
softfloat: fix float{32,64}_maybe_silence_nan() for MIPS
On targets that define sNaN with the sNaN bit as one, simply clearing
this bit may correspond to an infinite value.
Convert it to a default NaN if SNAN_BIT_IS_ONE, as it corresponds to
the MIPS implementation, the only emulated CPU with SNAN_BIT_IS_ONE.
When other CPU of this type are added, this might be updated to include
more cases.
Aurelien Jarno [Thu, 6 Jan 2011 14:38:18 +0000 (15:38 +0100)]
target-ppc: remove PRECISE_EMULATION define
The PRECISE_EMULATION is "hardcoded" to one in target-ppc/exec.h and not
something easily tunable. Remove it and non-precise emulation code as
it doesn't make a noticeable difference in speed. People wanting speed
improvement should use softfloat-native instead.
It uses the color expansion rop with the source pitch set to 0. This is
something allowed, as the manual explicitely says "When the source of
color-expand data is display memory, the source pitch is ignored.".
This patch fixes this regression by computing sx, sy and others
variables only if they are going to be used later, that is for a plain
copy ROP. It basically consists in moving code.
Aurelien Jarno [Tue, 4 Jan 2011 20:58:24 +0000 (21:58 +0100)]
Fix curses on big endian hosts
On big endian hosts, the curses interface is unusable: the emulated
graphic card only displays garbage, while the monitor interface displays
nothing (or rather only spaces).
The curses interface is waiting for data in native endianness, so
console_write_ch() should not do any conversion. The conversion should
be done when reading the video buffer in hw/vga.c. I supposed this
buffer is in little endian mode, though it's not impossible that the
data is actually in guest endianness. I currently have no big endian
guest to way (they all switch to graphic mode immediately).
Michael Walle [Tue, 4 Jan 2011 00:48:55 +0000 (01:48 +0100)]
noaudio: correctly account acquired samples
This will fix the return value of the function which otherwise returns too
many samples because sw->total_hw_samples_acquired isn't correctly
accounted.
Peter Maydell [Thu, 16 Dec 2010 11:51:17 +0000 (11:51 +0000)]
softfloat: abstract out target-specific NaN propagation rules
IEEE754 doesn't specify precisely what NaN should be returned as
the result of an operation on two input NaNs. This is therefore
target-specific. Abstract out the code in propagateFloat*NaN()
which was implementing the x87 propagation rules, so that it
can be easily replaced on a per-target basis.
Peter Maydell [Fri, 17 Dec 2010 15:56:06 +0000 (15:56 +0000)]
softfloat: Rename float*_is_nan() functions to float*_is_quiet_nan()
The softfloat functions float*_is_nan() were badly misnamed,
because they return true only for quiet NaNs, not for all NaNs.
Rename them to float*_is_quiet_nan() to more accurately reflect
what they do.
This change was produced by:
perl -p -i -e 's/_is_nan/_is_quiet_nan/g' $(git grep -l is_nan)
(with the results manually checked.)
projects / qemu.git / log