Jan Kiszka [Thu, 24 May 2012 15:05:15 +0000 (12:05 -0300)]
audio: Always call fini on exit
Not only clean up enabled voices but any registered one. Backends like
pulsaudio rely on unconditional fini handler invocations.
This fixes "Memory pool destroyed but not all memory blocks freed!"
warnings on VM shutdowns when pa is used and lockups of QEMU on shutdown
as it got stuck on some pa-internal synchronization point.
Stefan Weil [Wed, 23 May 2012 21:26:41 +0000 (23:26 +0200)]
es1370: Fix debug code
When DEBUG_ES1370 is defined, the compiler shows these warnings:
hw/es1370.c: In function ?es1370_update_voices?:
hw/es1370.c:414: warning: format ?%d? expects type ?int?, but argument 3 has type ?size_t?
hw/es1370.c: In function ?es1370_writel?:
hw/es1370.c:582: warning: format ?%d? expects type ?int?, but argument 3 has type ?long int?
hw/es1370.c:592: warning: format ?%d? expects type ?int?, but argument 3 has type ?long int?
hw/es1370.c:609: warning: format ?%d? expects type ?int?, but argument 3 has type ?long int?
hw/es1370.c: In function ?es1370_readl?:
hw/es1370.c:751: warning: suggest braces around empty body in an ?if? statement
Fix the format strings and add the missing braces.
Anthony PERARD [Wed, 16 May 2012 17:50:10 +0000 (18:50 +0100)]
xen: Fix PV-on-HVM
In the context of PV-on-HVM under Xen, the emulated nics are supposed to be
unplug before the guest drivers are initialized, when the guest write to a
specific IO port.
Without this patch, the guest end up with two nics with the same MAC, the
emulated nic and the PV nic.
dunrong huang [Fri, 18 May 2012 11:14:13 +0000 (19:14 +0800)]
qdev: Fix memory leak
The str allocated in visit_type_str was not freed.
The visit_type_str function is an input visitor(<QMP/String/etc>-to-native)
here, it will allocate memory for caller, so the caller is responsible for
freeing the memory.
Paolo Bonzini [Wed, 16 May 2012 10:54:06 +0000 (12:54 +0200)]
virtio-blk: always enable VIRTIO_BLK_F_SCSI
VIRTIO_BLK_F_SCSI is supposed to mean whether the host can *parse*
SCSI requests, not *execute* them. You could run QEMU with scsi=on
and a file-backed disk, and QEMU would fail all SCSI requests even
though it advertises VIRTIO_BLK_F_SCSI.
Because we need to do this to fix a migration compatibility problem
related to how QEMU is invoked by management, we must do this
unconditionally even on older machine types. This more or less assumes
that no one ever invoked QEMU with scsi=off.
Here is how testing goes:
- old QEMU, scsi=on -> new QEMU, scsi=on
- new QEMU, scsi=on -> old QEMU, scsi=on
- old QEMU, scsi=off -> new QEMU, scsi=on
- new QEMU, scsi=off -> old QEMU, scsi=on
ok (new QEMU has VIRTIO_BLK_F_SCSI, adding host features is fine)
- old QEMU, scsi=off -> new QEMU, scsi=off
ok (new QEMU has VIRTIO_BLK_F_SCSI, adding host features is fine)
- old QEMU, scsi=on -> new QEMU, scsi=off
ok, bug fixed
- new QEMU, scsi=on -> old QEMU, scsi=off
doesn't work (same as: old QEMU, scsi=on -> old QEMU, scsi=off)
- new QEMU, scsi=off -> old QEMU, scsi=off
broken by the patch
Paolo Bonzini [Wed, 16 May 2012 10:54:03 +0000 (12:54 +0200)]
virtio-blk: report non-zero status when failing SG_IO requests
Linux really looks only at scsi->errors for SG_IO requests; it does
not look at the virtio request status at all. Because of this, when
a SG_IO request is failed early with virtio_blk_req_complete(req,
VIRTIO_BLK_S_UNSUPP), without writing hdr.status, it will look like
a success to the guest.
This is their bug, but we can make it safe for older guests now by
forcing scsi->errors to have a non-zero value whenever a request
has to be failed.
But if we fix the bug in the guest driver, we will have another problem
because QEMU returns VIRTIO_BLK_S_IOERR if the status is non-zero, and
Linux translates that to -EIO. Rather, the guest should succeed the
request and pass the non-zero status via the userspace-provided SG_IO
structure. So, remove the case where virtio_blk_handle_scsi can
return VIRTIO_BLK_S_IOERR.
Anthony Liguori [Mon, 21 May 2012 20:31:31 +0000 (15:31 -0500)]
Merge remote-tracking branch 'mdroth/qga-pull-5-15-12' into staging
* mdroth/qga-pull-5-15-12:
qemu-ga: align versioning with QEMU_VERSION
qemu-ga: fix segv after failure to open log file
qemu-ga: guest-shutdown: use only async-signal-safe functions
qemu-ga: guest-shutdown: become synchronous
qemu-ga: guest-suspend: make the API synchronous
qemu-ga: become_daemon(): reopen standard fds to /dev/null
qemu-ga: make reopen_fd_to_null() public
qemu-ga: guest-suspend-hybrid: don't emit a success response
qemu-ga: guest-suspend-ram: don't emit a success response
qemu-ga: guest-suspend-disk: don't emit a success response
qemu-ga: guest-shutdown: don't emit a success response
qemu-ga: don't warn on no command return
qapi: add support for command options
Stefan Weil [Tue, 15 May 2012 05:27:19 +0000 (07:27 +0200)]
tests: Fix linker failure for fdc-test
When QEMU was built with the simple trace backend, linking failed:
LINK tests/fdc-test
oslib-posix.o: In function `trace_qemu_memalign':
qemu/bin/debug/x86/./trace.h:31: undefined reference to `trace3'
oslib-posix.o: In function `trace_qemu_vmalloc':
qemu/bin/debug/x86/./trace.h:35: undefined reference to `trace2'
oslib-posix.o: In function `trace_qemu_vfree':
qemu/bin/debug/x86/./trace.h:39: undefined reference to `trace1'
collect2: error: ld returned 1 exit status
make: *** [tests/fdc-test] Fehler 1
There's some dodgy application of De Morgan's law in the emulation
of the MIPS BC1ANY[24]F instructions: they end up branching only
if all CCs are false, rather than if one CC is.
Tested on mips64-linux-gnu, where it fixes the GCC MIPS3D tests.
Alexander Graf [Thu, 10 May 2012 22:40:10 +0000 (22:40 +0000)]
linux-user: Fix stale tbs after mmap
If we execute linux-user code that does the following:
* A = mmap()
* execute code in A
* munmap(A)
* B = mmap(), but mmap returns the same address as A
* execute code in B
we end up executing a stale cached tb that contains translated code
from A, while we want new code from B.
This patch adds a TB flush for mmap'ed regions, before we return them,
avoiding the whole issue. It also adds a flush for munmap, so that we
don't execute stale TBs instead of getting a segfault.
Blue Swirl [Sat, 12 May 2012 17:20:52 +0000 (17:20 +0000)]
sparc64: fix initrd loading
Initrd load address is too low, it conflicts with kernel load
address:
rom: requested regions overlap (rom phdr #0: /tmp/vmlinux-debian-6.0.4-sparc64. free=0x0000000000742519, addr=0x0000000000400000)
rom loading failed
Fix by making the initrd address variable, load initrd after kernel
image. Use 64 bit variables instead of longs or 32 bit types.
Roger Pau Monne [Fri, 18 May 2012 11:08:14 +0000 (12:08 +0100)]
audio: split IN_T into two separate constants
Split IN_T into BSIZE and ITYPE, to avoid expansion if the OS has
defined macros for the intX_t and uintX_t types. The IN_T constant is
then defined in mixeng_template.h so it can be used by the
functions/macros on this header file.
This change has been tested successfully under Debian Linux and NetBSD
6.0BETA.
Michael Roth [Mon, 14 May 2012 14:33:48 +0000 (09:33 -0500)]
qemu-ga: align versioning with QEMU_VERSION
Previously qemu-ga version was defined seperately. Since it is aligned
with QEMU releases, use QEMU_VERSION instead. This also implies the
version bump for 1.1[-rcN] release of qemu-ga.
Michael Roth [Mon, 14 May 2012 21:42:35 +0000 (16:42 -0500)]
qemu-ga: fix segv after failure to open log file
Currently, if we fail to open the specified log file (generally due to a
permissions issue), we'll assign NULL to the logfile handle (stderr,
initially) used by the logging routines, which can cause a segfault to
occur when we attempt to report the error before exiting.
Instead, only re-assign if the open() was successful.
Luiz Capitulino [Mon, 14 May 2012 18:25:20 +0000 (15:25 -0300)]
qemu-ga: guest-shutdown: use only async-signal-safe functions
POSIX mandates[1] that a child process of a multi-thread program uses
only async-signal-safe functions before exec(). We consider qemu-ga
to be multi-thread, because it uses glib.
However, qmp_guest_shutdown() uses functions that are not
async-signal-safe. Fix it the following way:
- fclose() -> reopen_fd_to_null()
- execl() -> execle()
- exit() -> _exit()
- drop slog() usage (which is not safe)
Luiz Capitulino [Fri, 11 May 2012 19:19:47 +0000 (16:19 -0300)]
qemu-ga: guest-shutdown: become synchronous
Last commit dropped qemu-ga's SIGCHLD handler, used to automatically
reap terminated children processes. This introduced a bug to
qmp_guest_shutdown(): it will generate zombies.
This problem probably doesn't matter in the success case, as the VM
will shutdown anyway, but let's do the right thing and reap the
created process. This ultimately means that guest-shutdown is now a
synchronous command.
An interesting side effect is that guest-shutdown is now able to
report an error to the client if shutting down fails.
Luiz Capitulino [Fri, 11 May 2012 19:19:46 +0000 (16:19 -0300)]
qemu-ga: guest-suspend: make the API synchronous
Currently, qemu-ga has a SIGCHLD handler that automatically reaps terminated
children processes. The idea is to avoid having qemu-ga commands blocked
waiting for children to terminate.
That approach has two problems:
1. qemu-ga is unable to detect errors in the child, meaning that qemu-ga
returns success even if the child fails to perform its task
2. if a command does depend on the child exit status, the command has to
play tricks to bypass the automatic reaper
Case 2 impacts the guest-suspend-* API, because it has to execute an external
program to check for suspend support. Today, to bypass the automatic reaper,
suspend code has to double fork and pass exit status information through a
pipe. Besides being complex, this is prone to race condition bugs. Indeed,
the current code does have such bugs.
Making the guest-suspend-* API synchronous (ie. by dropping the SIGCHLD
handler and calling waitpid() from commands) is a much simpler approach,
which fixes current race conditions bugs and enables commands to detect
errors in the child.
This commit does just that. There's a side effect though, guest-shutdown
will generate zombies if shutting down fails. This will be fixed by the
next commit.
Luiz Capitulino [Thu, 10 May 2012 19:50:42 +0000 (16:50 -0300)]
qemu-ga: become_daemon(): reopen standard fds to /dev/null
This fixes a bug where qemu-ga doesn't suspend the guest because it
fails to detect suspend support even when the guest does support
suspend. This happens because of the way qemu-ga fds are managed in
daemon mode.
When starting qemu-ga with --daemon, become_daemon() will close all
standard fds. This will cause qemu-ga to end up with the following
fds (if started with 'qemu-ga --daemon'):
0 -> /dev/vport0p1
3 -> /run/qemu-ga.pid
Then a guest-suspend-* function is issued. They call bios_supports_mode(),
which will call pipe(), and qemu-ga's fd will be:
bios_supports_mode() forks off a child and blocks waiting for the child
to write something to the pipe. The child, however, closes its reading
end of the pipe _and_ reopen all standard fds to /dev/null. This will
cause the child's fds to be:
In other words, the child's writing end of the pipe is now /dev/null.
It writes there and exits. The parent process (blocked on read()) will
get an EOF and interpret this as "something unexpected happened in
the child, let's assume the guest doesn't support suspend". And suspend
will fail.
To solve this problem we have to reopen standard fds to /dev/null
in become_daemon(), instead of closing them.
Luiz Capitulino [Tue, 8 May 2012 17:24:49 +0000 (14:24 -0300)]
qemu-ga: guest-suspend-hybrid: don't emit a success response
Today, qemu-ga may not be able to emit a success response when
guest-suspend-hybrid completes. This happens because the VM may
suspend before qemu-ga is able to emit a response.
This semantic is a bit confusing, as it's not clear for clients if
they should wait for a response or how they should check for success.
This commit solves that problem by changing guest-suspend-hybrid to
never emit a success response and suggests in the documentation
what clients should do to check for success.
Luiz Capitulino [Tue, 8 May 2012 17:24:48 +0000 (14:24 -0300)]
qemu-ga: guest-suspend-ram: don't emit a success response
Today, qemu-ga may not be able to emit a success response when
guest-suspend-ram completes. This happens because the VM may
suspend before qemu-ga is able to emit a response.
This semantic is a bit confusing, as it's not clear for clients if
they should wait for a response or how they should check for success.
This commit solves that problem by changing guest-suspend-ram to
never emit a success response and suggests in the documentation
what clients should do to check for success.
Luiz Capitulino [Tue, 8 May 2012 17:24:47 +0000 (14:24 -0300)]
qemu-ga: guest-suspend-disk: don't emit a success response
Today, qemu-ga may not be able to emit a success response when
guest-suspend-disk completes. This happens because the VM may
vanish before qemu-ga is able to emit a response.
This semantic is a bit confusing, as it's not clear for clients if
they should wait for a response or how they should check for success.
This commit solves that problem by changing guest-suspend-disk to
never emit a success response and suggests in the documentation
what clients could do to check for success.
Luiz Capitulino [Tue, 8 May 2012 17:24:46 +0000 (14:24 -0300)]
qemu-ga: guest-shutdown: don't emit a success response
Today, qemu-ga may not be able to emit a success response when
guest-shutdown completes. This happens because the VM may vanish
before qemu-ga is able to emit a response.
This semantic is a bit confusing, as it's not clear for clients if
they should wait for a response or how they should check for success.
This commit solves that problem by changing guest-shutdown to never
emit a success response and suggests in the documentation what
clients could do to check for success.
Luiz Capitulino [Tue, 8 May 2012 17:24:44 +0000 (14:24 -0300)]
qapi: add support for command options
Options allow for changes in commands behavior. This commit introduces
the QCO_NO_SUCCESS_RESP option, which causes a command to not emit a
success response.
This is needed by commands such as qemu-ga's guest-shutdown, which
may not be able to complete before the VM vanishes. In this case, it's
useful and simpler not to bother sending a success response.
Anthony Liguori [Mon, 14 May 2012 15:06:50 +0000 (10:06 -0500)]
Merge remote-tracking branch 'sweil/for-1.1' into staging
* sweil/for-1.1:
qemu-doc: Use QEMU instead of qemu for product name
qemu-doc: Fix executable name in examples
qemu-doc: Add missing parameter in description of -D option
configure: Use QEMU instead of Qemu
fix some common typos
qemu-timer: Fix wrong error message
Charles Arnold [Fri, 11 May 2012 16:57:54 +0000 (10:57 -0600)]
qemu-img: Fix segmentation fault
The following command generates a segmentation fault.
qemu-img convert -O vpc -o ? test test2
This is because the 'goto out;' statement calls qemu_progress_end
before qemu_progress_init is called resulting in a NULL pointer
invocation.
Jan Kiszka [Wed, 9 May 2012 17:23:27 +0000 (14:23 -0300)]
coroutine: Fix setup of sigaltstack coroutines
Use pthread_kill instead of process-wide kill to invoke the signal
handler used for stack switching. This may fix spurious lock-ups with
this backend, easily triggerable by extending the time window between
kill and sigsuspend.
Michael Roth [Fri, 11 May 2012 17:43:24 +0000 (12:43 -0500)]
qapi: QMP input visitor, handle floats parsed as ints
JSON numbers can be interpreted as either integers or floating point
values depending on their representation. As a result, QMP input visitor
might visit a QInt when it was expecting a QFloat, so add handling to
account for this.
Gerd Hoffmann [Tue, 8 May 2012 11:54:45 +0000 (13:54 +0200)]
usb-host: handle guest-issued clear halt
Most important here is to update our internal endpoint state so we know
the endpoint isn't in halted state any more. Without this usb-host
tries to clear halt again with the next data transfer submitted. Doing
this twice is (a) not correct and (b) confuses some usb devices,
rendering them non-functional in the guest.
Stefan Weil [Fri, 11 May 2012 20:21:50 +0000 (22:21 +0200)]
qemu-doc: Fix executable name in examples
The executable name qemu was replaced some time ago by qemu-system-i386.
Fix all examples accordingly.
Some examples will only work with qemu-system-i386 or qemu-system-x86_64
for obvious reasons ("dos.img").
To keep things simple, I did not vary the executable name.
Place holders like qemu-system-TARGET were also only used once
in the enhanced description for QEMU launches using Wine.
Manually eliding the FP, "rela->real" and resolving "addres" to
address (not "adders") we get this:
sed -i '450s!thru!through!' Changelog
sed -i '260s!neccessary!necessary!' coroutine-sigaltstack.c
sed -i '54s!miniscule!minuscule!' disas.c
sed -i '1094s!thru!through!' hw/usb/hcd-ehci.c
sed -i '1095s!thru!through!' hw/usb/hcd-ehci.c
sed -i '21s!unecessary!unnecessary!' qapi-schema-guest.json
sed -i '307s!explictly!explicitly!' qemu-ga.c
sed -i '490s!preceeding!preceding!' qga/commands-posix.c
sed -i '792s!addres!address!' qga/commands-posix.c
sed -i '6s!beeing!being!' tests/tcg/test-mmap.c
Also, manually fix "arithmentic", spotted by Peter Maydell:
sed -i 's!arithmentic!arithmetic!' coroutine-sigaltstack.c
Andreas Färber [Wed, 9 May 2012 21:15:32 +0000 (23:15 +0200)]
target-i386: Defer MCE init
Commit de024815e3b523addf58f1f79846b7fe74643678 (target-i386: QOM'ify
CPU init) moved mce_init() call from helper.c:cpu_x86_init() into
X86CPU's cpu.c:x86_cpu_initfn().
mce_init() checks for a family >= 6 though, so we could end up with a
sequence such as for -cpu somecpu,family=6:
Therefore partially revert the above commit. To avoid moving
mce_init() back into helper.c, foresightedly move it into a
new x86_cpu_realize() function and, in lack of ObjectClass::realize,
call it directly from cpu_x86_init().
While at it, move the qemu_init_vcpu() call that used to follow
mce_init() in cpu_x86_init() into the new realizefn as well.
Artyom Tarasenko [Sat, 12 May 2012 09:15:20 +0000 (11:15 +0200)]
Implement address masking for SPARC v9 CPUs
According to UltraSPARC - IIi User's manual:
14.1.11 Address Masking (Impdep #125)
When PSTATE.AM=1, the CALL, JMPL, and RDPC instructions and all traps
transmit zero in the high-order 32-bits of the PC to their specified
destination registers.
Paolo Bonzini [Thu, 10 May 2012 07:39:17 +0000 (09:39 +0200)]
vga: disable default VGA if appropriate -device is used
This is a partial revert of commits a369da5 (vga: improve VGA logic,
committed 2012-01-22) and c5bd4f3 (vga: fix -nodefaults -device VGA,
2012-01-24) which broke command-line option parsing in different ways.
Since commit a369da5 it has become impossible to specify a VGA device
entirely with QemuOpts-enabled options, i.e. without needing an explicit
"-vga none".
In addition, until commit c5bd4f3 -nodefaults would not disable the device
you specified with the legacy "-vga" option, independent of the order.
Since commit c5bd4f3 QEMU -nodefaults will override a previous -vga
option.
I did not reintroduce machine->no_vga. Boards can simply ignore the
vga_interface_type variable, and most will indeed do so.
Max Filippov [Sat, 5 May 2012 21:44:31 +0000 (01:44 +0400)]
cputlb: fix watchpoints handling
Cleanup commit e554861766d9ae84dd5720baa4869f4ed711506f have changed
code_address calculation in the tlb_set_page function in case of access
to a page with a watchpoint. This caused QEMU segfault in the xtensa
test_break unit test. Fix it by moving code_address assignment above
memory_region_section_get_iotlb call.
Amos Kong [Thu, 10 May 2012 16:28:35 +0000 (00:28 +0800)]
use inet_listen()/inet_connect() to support ipv6 migration
Use help functions in qemu-socket.c for tcp migration,
which already support ipv6 addresses.
Currently errp will be set to UNDEFINED_ERROR when migration fails,
qemu would output "migration failed: ...", and current user can
see a message("An undefined error has occurred") in monitor.
This patch changed tcp_start_outgoing_migration()/inet_connect()
/inet_connect_opts(), socket error would be passed back,
then current user can see a meaningful err message in monitor.
Qemu will exit if listening fails, so output socket error
to qemu stderr.
For IPv6 brackets must be mandatory if you require a port.
Referencing to RFC5952, the recommended format is:
[2312::8274]:5200
Amos Kong [Thu, 10 May 2012 16:28:16 +0000 (00:28 +0800)]
sockets: change inet_connect() to support nonblock socket
Add a bool argument to inet_connect() to assign if set socket
to block/nonblock, and delete original argument 'socktype'
that is unused.
Add a new argument to inet_connect()/inet_connect_opts(),
to pass back connect error by error class.
Retry to connect when -EINTR is got. Connect's successful
for nonblock socket when following errors are got, user
should wait for connecting by select():
-EINPROGRESS
-EWOULDBLOCK (win32)
-WSAEALREADY (win32)
Amos Kong [Thu, 10 May 2012 16:28:08 +0000 (00:28 +0800)]
qerror: add five qerror strings
Add five new qerror strings, they are about listen/connect socket:
QERR_SOCKET_CONNECT_IN_PROGRESS
QERR_SOCKET_CONNECT_FAILED
QERR_SOCKET_LISTEN_FAILED
QERR_SOCKET_BIND_FAILED
QERR_SOCKET_CREATE_FAILED
Jan Kiszka [Wed, 9 May 2012 22:14:25 +0000 (19:14 -0300)]
Switch SIG_IPI to SIGUSR1
Use SIGUSR1 unconditionally as SIG_IPI. First, ucontext coroutines tend
to corrupt RT signal masks due to a 32-on-64-bit Linux kernel bug. And,
second, there appears to be no advantage in using RT signals for VCPU
kicking.
Anthony Liguori [Thu, 10 May 2012 13:30:34 +0000 (08:30 -0500)]
Merge remote-tracking branch 'kwolf/for-anthony' into staging
* kwolf/for-anthony: (30 commits)
declare ECANCELED on all machines
tests/Makefile: Add missing $(EXESUF)
stream: do not copy unallocated sectors from the base
stream: fix ratelimiting corner case
stream: fix HMP block_job_set_speed
stream: pass new base image format to bdrv_change_backing_file
stream: add testcase for partial streaming
stream: fix sectors not allocated test
qemu-io: fix the alloc command
qemu-io: correctly print non-integer values as decimals
qemu-img: make "info" backing file output correct and easier to use
block: move field reset from bdrv_open_common to bdrv_close
block: protect path_has_protocol from filenames with colons
block: simplify path_is_absolute
block: wait for job callback in block_job_cancel_sync
block: add block_job_sleep_ns
block: fully delete bs->file when closing
block: do not reuse the backing file across bdrv_close/bdrv_open
block: another bdrv_append fix
block: fix snapshot on QED
...
Peter Maydell [Thu, 10 May 2012 12:56:09 +0000 (12:56 +0000)]
target-arm/cpu.h: Make cpu_init("nonexistent cpu") return NULL
The macro definition of cpu_init meant that if cpu_arm_init()
returned NULL this wouldn't result in cpu_init() itself returning
NULL. This had the effect that "-cpu foo" for some unknown CPU
name 'foo' would cause ARM targets to segfault rather than
generating a useful error message. Fix this by making cpu_init
a simple inline function.
David Gibson [Wed, 4 Apr 2012 01:15:54 +0000 (11:15 +1000)]
kvm: Fix dirty tracking with large kernel page size
If the kernel page size is larger than TARGET_PAGE_SIZE, which
happens for example on ppc64 with kernels compiled for 64K pages,
the dirty tracking doesn't work.
Paolo Bonzini [Tue, 8 May 2012 14:51:58 +0000 (16:51 +0200)]
stream: do not copy unallocated sectors from the base
Unallocated sectors should really never be accessed by the guest,
so there's no need to copy them during the streaming process.
If they are read by the guest during streaming, guest-initiated
copy-on-read will copy them (we're in the base == NULL case, which
enables copy on read). If they are read after we disconnect the
image from the base, they will read as zeroes anyway.
Paolo Bonzini [Tue, 8 May 2012 14:51:57 +0000 (16:51 +0200)]
stream: fix ratelimiting corner case
This fixes inability to make progress in streaming if the quota is set
to less than the amount of data that an I/O operation has to write.
In this case, limit->dispatched + n will always be above the quota and,
due to the "goto retry" to recheck cancellation and allocation, streaming
will livelock.
This can be reproduced with "block_job_set_speed ide0-hd0 1b". Of course,
with this patch the requested limit will not be obeyed. That could be
done with another patch that caps is_allocated's n argument by the slice
quota.
Paolo Bonzini [Tue, 8 May 2012 14:51:55 +0000 (16:51 +0200)]
stream: pass new base image format to bdrv_change_backing_file
When an image is modified to point to the new backing file, the backing
file format is set to NULL, which means auto-probe. This is wrong, in
fact it is a small security problem.
Paolo Bonzini [Tue, 8 May 2012 14:51:51 +0000 (16:51 +0200)]
qemu-io: correctly print non-integer values as decimals
qemu-io's cvtstr function sometimes will incorrectly omit the
decimal part of the number, and sometimes will incorrectly include
it. This patch fixes both. The former is more serious, and can
be seen in the patches to 027.out and 033.out.
The changes to all other files were scripted with sed, so there were
no "surprises" beyond 027.out and 033.out.
Paolo Bonzini [Tue, 8 May 2012 14:51:50 +0000 (16:51 +0200)]
qemu-img: make "info" backing file output correct and easier to use
qemu-img info should use the same logic as qemu when printing the
backing file path, or debugging becomes quite tricky. We can also
simplify the output in case the backing file has an absolute path
or a protocol.
Paolo Bonzini [Tue, 8 May 2012 14:51:48 +0000 (16:51 +0200)]
block: protect path_has_protocol from filenames with colons
path_has_protocol will erroneously return "true" if the colon is part
of a filename. These names are common with stable device names produced
by udev. We cannot fully protect against this in case the filename
does not have a path component (e.g. if the current directory is
/dev/disk/by-path), but in the common case there will be a slash before
and path_has_protocol can easily detect that and return false.
projects / qemu.git / log