* remotes/armbru/tags/pull-qapi-2020-02-15:
qapi: Delete all the "foo: dropped in n.n" notes
qapi/migration.json: Replace _this_ with *this*
qapi: Add blank lines before bulleted lists
qapi: Use explicit bulleted lists
qapi/ui.json: Avoid `...' Texinfo style quoting
qapi/ui.json: Put input-send-event body text in the right place
qapi: Remove hardcoded tabs
qapi: Fix indent level on doc comments in json files
qapi: Fix incorrect "Not documented" claims in QMP documentation
qapi/block-core.json: Use literal block for ascii art
qga/qapi-schema.json: minor format fixups for rST
qga/qapi-schema.json: Fix indent level on doc comments
qga/qapi-schema.json: Fix missing '-' in GuestDiskBusType doc comment
Makefile: Fix typo in dependency list for interop manpages
configure: Check that sphinx-build is using Python 3
configure: Pick sphinx-build-3 when available
configure: Allow user to specify sphinx-build binary
qapi: Expand documentation for LostTickPolicy
Peter Maydell [Thu, 13 Feb 2020 17:56:35 +0000 (17:56 +0000)]
qapi: Delete all the "foo: dropped in n.n" notes
A handful of QAPI doc comments include lines like
"ppcemb: dropped in 3.1". The doc comment parser will just
put these into whatever the preceding section was; sometimes
that's "Notes", and sometimes it's some random other section,
as with "NetClientDriver" where the "'dump': dropped in 2.12"
line ends up in the "Since:" section.
This tends to render wrongly, more so in the upcoming rST
generator, but sometimes even in the Texinfo, as in the case
of QKeyCode:
ac_bookmarks
since 2.10 altgr, altgr_r: dropped in 2.10
Since commit 3264ffced3 (v4.2.0), we have a better place to tell
users about deprecated and deleted functionality --
qemu-deprecated.texi. These "dropped in" remarks all predate it, and
other feature drops of that vintage are not documented anywhere, so
moving these to qemu-deprecated.texi makes little sense. Drop them
instead.
Peter Maydell [Thu, 13 Feb 2020 17:56:34 +0000 (17:56 +0000)]
qapi/migration.json: Replace _this_ with *this*
The MigrationInfo::setup-time documentation is the only place where we
use _this_ inline markup for emphasis, commonly rendered in italics.
We would like to switch the doc comments to rST format, but rST
doesn't recognize that markup and emits literal underscores.
Switch to *this* instead. Changes markup to strong emphasis with
Texinfo, commonly rendered as bold. With rST, it will go right back
to emphasis / italics.
rST also uses **this** for strong (commonly rendered bold) where
Texinfo uses *this*. We have one place in the doc comments
which uses strong/bold markup, in qapi/introspect.json:
Note: the QAPI schema is also used to help define *internal*
When we switch to rST that will be rendered as emphasis / italics.
Markus (who wrote that) thinks that using emphasis / italics
there is an improvement, so we leave that markup alone.
Peter Maydell [Thu, 13 Feb 2020 17:56:33 +0000 (17:56 +0000)]
qapi: Add blank lines before bulleted lists
We would like to switch the doc comments to rST format. rST
insists on a blank line before and after a bulleted list, but our
Texinfo doc generator did not. Add some extra blank lines in the doc
comments so they're acceptable rST input.
Peter Maydell [Thu, 13 Feb 2020 17:56:30 +0000 (17:56 +0000)]
qapi: Use explicit bulleted lists
A JSON block comment like this:
Returns: nothing on success
If @node is not a valid block device, DeviceNotFound
If @name is not found, GenericError with an explanation
renders like this:
Returns: nothing on success If node is not a valid block device,
DeviceNotFound If name is not found, GenericError with an explanation
because whitespace is not significant.
Use an actual bulleted list, so that the formatting is correct.
Peter Maydell [Thu, 13 Feb 2020 17:56:29 +0000 (17:56 +0000)]
qapi/ui.json: Avoid `...' Texinfo style quoting
Avoid Texinfo style quoting with `...', because we would like to
switch the doc comments to rST format, and rST treats it as a syntax
error. Use '...' instead, as we do in other doc comments. This looks
OK in Texinfo, and rST formats it as paired-quotation-marks.
Peter Maydell [Thu, 13 Feb 2020 17:56:28 +0000 (17:56 +0000)]
qapi/ui.json: Put input-send-event body text in the right place
In the doc comment for input-send-event, there is a multi-line
chunk of text ("The @device...take precedence") which is intended
to be the main body text describing the event. However it has
been placed after the arguments and Returns: section, which
means that the parser actually thinks that this text is
part of the "Returns" section text.
Move the body text up to the top so that the parser correctly
classifies it as body.
Peter Maydell [Thu, 13 Feb 2020 17:56:26 +0000 (17:56 +0000)]
qapi: Fix indent level on doc comments in json files
The current doc generation doesn't care much about indentation levels,
but we would like to switch to an rST format, and rST does care about
indentation.
Make the doc comments more strongly consistent about indentation
for multiline constructs like:
@arg: description line 1
description line 2
Returns: line one
line 2
so that there is always exactly one space after the colon, and
subsequent lines align with the first.
This commit is a purely whitespace change, and it does not alter the
generated .texi files (because the texi generation code strips away
all the extra whitespace). This does mean that we end up with some
over-length lines.
Note that when the documentation for an argument fits on a single
line like this:
@arg: one line only
then stray extra spaces after the ':' don't affect the rST output, so
I have not attempted to methodically fix them, though the preference
is a single space here too.
Peter Maydell [Thu, 13 Feb 2020 17:56:25 +0000 (17:56 +0000)]
qapi: Fix incorrect "Not documented" claims in QMP documentation
Some qapi doc comments have forgotten the ':' after the
@argument, like this:
# @filename Filename for the new image file
# @size Size of the virtual disk in bytes
The result is that these are parsed as part of the body
text and appear as a run-on line:
filename Filename for the new image file size Size of the virtual disk in bytes"
followed by
filename: string
Not documented
size: int
Not documented
Peter Maydell [Thu, 13 Feb 2020 17:56:24 +0000 (17:56 +0000)]
qapi/block-core.json: Use literal block for ascii art
The ascii-art graph in the BlockLatencyHistogramInfo documentation
doesn't render correctly, because the whitespace is collapsed.
Use the '|' format that emits a literal 'example' block so the graph
is displayed correctly.
Strictly the Texinfo generated is still wrong because each line
goes into its own @example environment, but it renders better
than what we had before.
Fixing this rendering is a necessary prerequisite for the upcoming rST
generator, which otherwise complains about the inconsistent
indentation in the ascii-art graph.
Peter Maydell [Thu, 13 Feb 2020 17:56:23 +0000 (17:56 +0000)]
qga/qapi-schema.json: minor format fixups for rST
We would like to switch the doc comments to rST format, and rST
requires a blank line before the start of a bulleted or enumerated
list. Two places in qapi-schema.json were missing this blank line.
Some places were using an indented line as a sort of single-item
bulleted list, which in the Texinfo output comes out all run
onto a single line; use a real bulleted list instead.
Some places unnecessarily indented lists, which confuses rST.
guest-fstrim:minimum's documentation was indented the
right amount to share a line with @minimum, but wasn't
actually doing so.
The indent on the bulleted list in the guest-set-vcpus
Returns section meant rST misindented it.
Changes to the generated Texinfo are very minor (the new
bulleted lists, and a few extra blank lines).
Peter Maydell [Thu, 13 Feb 2020 17:56:22 +0000 (17:56 +0000)]
qga/qapi-schema.json: Fix indent level on doc comments
The current doc generation doesn't care much about indentation levels,
but we would like to switch to an rST format, and rST does care about
indentation.
Make the doc comments more strongly consistent about indentation
for multiline constructs like:
@arg: description line 1
description line 2
Returns: line one
line 2
so that there is always exactly one space after the colon, and
subsequent lines align with the first.
This commit is a purely whitespace change, and it does not alter the
generated .texi files (because the texi generation code strips away
all the extra whitespace). This does mean that we end up with some
over-length lines.
Note that when the documentation for an argument fits on a single
line like this:
@arg: one line only
then stray extra spaces after the ':' don't affect the rST output, so
I have not attempted to methodically fix them, though the preference
is a single space here too.
Peter Maydell [Thu, 13 Feb 2020 17:56:21 +0000 (17:56 +0000)]
qga/qapi-schema.json: Fix missing '-' in GuestDiskBusType doc comment
The doc comment for GuestDiskBusType doesn't match up with the
enumeration because of a missing hyphen in 'file-backed-virtual'.
This means the docs are rendered wrongly:
"virtual"
Win virtual bus type "file-backed" virtual: Win file-backed bus type
Peter Maydell [Thu, 13 Feb 2020 17:56:20 +0000 (17:56 +0000)]
Makefile: Fix typo in dependency list for interop manpages
Fix a typo in the dependency list for the manpages built from the
'interop' manual, which meant we were accidentally not including
the .hx file in the dependency list.
Peter Maydell [Thu, 13 Feb 2020 17:56:19 +0000 (17:56 +0000)]
configure: Check that sphinx-build is using Python 3
Currently configure's has_sphinx_build() check simply runs a dummy
sphinx-build and either passes or fails. This means that "no
sphinx-build at all" and "sphinx-build exists but is too old" are
both reported the same way.
Further, we want to assume that all the Python we write is running
with at least Python 3.5; configure checks that for our scripts, but
Sphinx extensions run with whatever Python version sphinx-build
itself is using.
Add a check to our conf.py which makes sphinx-build fail if it would
be running our extensions with an old Python, and handle this
in configure so we can report failure helpfully to the user.
This will mean that configure --enable-docs will fail like this
if the sphinx-build provided is not suitable:
Warning: sphinx-build exists but it is either too old or uses too old a Python version
ERROR: User requested feature docs
configure was not able to find it.
Install texinfo, Perl/perl-podlators and a Python 3 version of python-sphinx
(As usual, the default is to simply not build the docs, as we would
if sphinx-build wasn't present at all.)
The next commit will require a sphinx-build that uses Python 3. On
some systems, sphinx-build is fine, on others you need to use
sphinx-build-3. To keep things working out of the box on both kinds
of systems, try sphinx-build-3, then sphinx-build.
Peter Maydell [Fri, 14 Feb 2020 18:37:11 +0000 (18:37 +0000)]
Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-5.0-sf2' into staging
RISC-V Patches for the 5.0 Soft Freeze, Part 2
This is a fairly light-weight pull request, but I wanted to send it out to
avoid the Goldfish stuff getting buried as the next PR should contain the H
extension implementation.
As far as this PR goes, it contains:
* The addition of syscon device tree nodes for reboot and poweroff, which
allows Linux to control QEMU without an additional driver. The existing
device was already compatible with the syscon interface.
* A fix to our GDB stub to avoid confusing XLEN and FLEN, specifically useful
for rv32id-based systems.
* A device emulation for the Goldfish RTC device, a simple memory-mapped RTC.
* The addition of the Goldfish RTC device to the RISC-V virt board.
This passes "make check" and boots buildroot for me.
# gpg: Signature made Mon 10 Feb 2020 21:28:04 GMT
# gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg: issuer "[email protected]"
# gpg: Good signature from "Palmer Dabbelt <[email protected]>" [unknown]
# gpg: aka "Palmer Dabbelt <[email protected]>" [unknown]
# gpg: aka "Palmer Dabbelt <[email protected]>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
# Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889
* remotes/palmer/tags/riscv-for-master-5.0-sf2:
MAINTAINERS: Add maintainer entry for Goldfish RTC
riscv: virt: Use Goldfish RTC device
hw: rtc: Add Goldfish RTC device
riscv: Separate FPU register size from core register size in gdbstub [v2]
riscv/virt: Add syscon reboot and poweroff DT nodes
Peter Maydell [Fri, 14 Feb 2020 17:57:15 +0000 (17:57 +0000)]
Merge remote-tracking branch 'remotes/juanquintela/tags/pull-migration-pull-request' into staging
Migration pull request
# gpg: Signature made Thu 13 Feb 2020 13:04:43 GMT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <[email protected]>" [full]
# gpg: aka "Juan Quintela <[email protected]>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/juanquintela/tags/pull-migration-pull-request:
git: Make submodule check only needed modules
migration-test: fix some memleaks in migration-test
tests/migration: Add some slack to auto converge
migration/rdma: rdma_accept_incoming_migration fix error handling
migration: Optimization about wait-unplug migration state
migration: Maybe VM is paused when migration is cancelled
Peter Maydell [Thu, 13 Feb 2020 17:56:18 +0000 (17:56 +0000)]
configure: Allow user to specify sphinx-build binary
Currently we insist on using 'sphinx-build' from the $PATH;
allow the user to specify the binary to use. This will be
more useful as we become pickier about the capabilities
we require (eg needing a Python 3 sphinx-build).
Andrea Bolognani [Tue, 11 Feb 2020 18:37:44 +0000 (19:37 +0100)]
qapi: Expand documentation for LostTickPolicy
The current documentation is fairly terse and not easy to decode
for someone who's not intimately familiar with the inner workings
of timer devices. Expand on it by providing a somewhat verbose
description of what behavior each policy will result in, as seen
from both the guest OS and host point of view.
* remotes/pmaydell/tags/pull-target-arm-20200213: (46 commits)
target/arm: Implement ARMv8.1-VMID16 extension
hw/arm/raspi: Extract the cores count from the board revision
hw/arm/raspi: Use a unique raspi_machine_class_init() method
hw/arm/raspi: Extract the board model from the board revision
hw/arm/raspi: Set default RAM size to size encoded in board revision
hw/arm/raspi: Let class_init() directly call raspi_machine_init()
hw/arm/raspi: Make board_rev a field of RaspiMachineClass
hw/arm/raspi: Make machines children of abstract RaspiMachineClass
hw/arm/raspi: Trivial code movement
hw/arm/raspi: Extract the processor type from the board revision
hw/arm/raspi: Extract the RAM size from the board revision
hw/arm/raspi: Extract the version from the board revision
hw/arm/raspi: Correct the board descriptions
hw/arm/raspi: Use BCM2708 machine type with pre Device Tree kernels
hw/char/exynos4210_uart: Fix memleaks in exynos4210_uart_init
hw/arm: ast2600: Wire up EHCI controllers
hw/arm: ast2400/ast2500: Wire up EHCI controllers
target/arm: Enable ARMv8.2-UAO in -cpu max
target/arm: Implement UAO semantics
target/arm: Update MSR access to UAO
...
Peter Maydell [Thu, 13 Feb 2020 18:00:37 +0000 (18:00 +0000)]
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20200212' into staging
Fix breakpoint invalidation.
Add support for tcg helpers with 7 arguments.
Add support for gvec helpers with 5 arguments.
# gpg: Signature made Thu 13 Feb 2020 00:21:34 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "[email protected]"
# gpg: Good signature from "Richard Henderson <[email protected]>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tcg-20200212:
tcg: Add tcg_gen_gvec_5_ptr
tcg: Add support for a helper with 7 arguments
exec: flush CPU TB cache in breakpoint_invalidate
Peter Maydell [Mon, 10 Feb 2020 12:01:46 +0000 (12:01 +0000)]
target/arm: Implement ARMv8.1-VMID16 extension
The ARMv8.1-VMID16 extension extends the VMID from 8 bits to 16 bits:
* the ID_AA64MMFR1_EL1.VMIDBits field specifies whether the VMID is
8 or 16 bits
* the VMID field in VTTBR_EL2 is extended to 16 bits
* VTCR_EL2.VS lets the guest specify whether to use the full 16 bits,
or use the backwards-compatible 8 bits
For QEMU implementing this is trivial:
* we do not track VMIDs in TLB entries, so we never use the VMID field
* we treat any write to VTTBR_EL2, not just a change to the VMID field
bits, as a "possible VMID change" that causes us to throw away TLB
entries, so that code doesn't need changing
* we allow the guest to read/write the VTCR_EL2.VS bit already
So all that's missing is the ID register part: report that we support
VMID16 in our 'max' CPU.
hw/arm/raspi: Extract the cores count from the board revision
The count of ARM cores is encoded in the board revision. Add a
helper to extract the number of cores, and use it. This will be
helpful when we add the Raspi0/1 that have a single core.
hw/arm/raspi: Use a unique raspi_machine_class_init() method
With the exception of the ignore_memory_transaction_failures
flag set for the raspi2, both machine_class_init() methods
are now identical. Merge them to keep a unique method.
hw/arm/raspi: Set default RAM size to size encoded in board revision
We added a helper to extract the RAM size from the board
revision, and made board_rev a field of RaspiMachineClass.
The class_init() can now use the helper to extract from the
board revision the board-specific amount of RAM.
hw/arm/raspi: Make board_rev a field of RaspiMachineClass
We want to have a common class_init(). The only value that
matters (and changes) is the board revision.
Pass the board_rev as class_data to class_init().
hw/arm/raspi: Extract the RAM size from the board revision
The board revision encode the amount of RAM. Add a helper
to extract the RAM size, and use it.
Since the amount of RAM is fixed (it is impossible to physically
modify to have more or less RAM), do not allow sizes different
than the one anounced by the manufacturer.
QEMU always used the non-mainlined type MACH_TYPE_BCM2708.
The value 0xc43 is registered to 'MX51_GGC' (processor i.MX51), and
0xc44 to 'Western Digital Sharespace NAS' (processor Marvell 88F5182).
The Raspberry Pi foundation bootloader only sets the BCM2708 machine
type, see [2] or [3]:
25 /*
26 * 2835 is a SKU in a series for which the 2708 is the first or primary SoC,
27 * so 2708 has historically been used rather than a dedicated 2835 ID.
28 *
29 * We don't define a machine type for bcm2709/bcm2836 since the RPi Foundation
30 * chose to use someone else's previously registered machine ID (3139, MX51_GGC)
31 * rather than obtaining a valid ID:-/
32 *
33 * For the bcm2837, hopefully a machine type is not needed, since everything
34 * is DT.
35 */
While the definition MACH_BCM2709 with value 0xc43 was introduced in
a commit described "Add 2709 platform for Raspberry Pi 2" out of the
mainline Linux kernel, it does not seem used, and the platform is
introduced with Device Tree support anyway (see [5] and [6]).
Remove the unused values (0xc43 introduced in commit 1df7d1f9303aef
"raspi: add raspberry pi 2 machine" and 0xc44 in commit bade58166f4
"raspi: Raspberry Pi 3 support"), keeping only MACH_TYPE_BCM2708.
Chen Qun [Thu, 13 Feb 2020 02:56:03 +0000 (10:56 +0800)]
hw/char/exynos4210_uart: Fix memleaks in exynos4210_uart_init
It's easy to reproduce as follow:
virsh qemu-monitor-command vm1 --pretty '{"execute": "device-list-properties",
"arguments":{"typename":"exynos4210.uart"}}'
ASAN shows memory leak stack:
#1 0xfffd896d71cb in g_malloc0 (/lib64/libglib-2.0.so.0+0x571cb)
#2 0xaaad270beee3 in timer_new_full /qemu/include/qemu/timer.h:530
#3 0xaaad270beee3 in timer_new /qemu/include/qemu/timer.h:551
#4 0xaaad270beee3 in timer_new_ns /qemu/include/qemu/timer.h:569
#5 0xaaad270beee3 in exynos4210_uart_init /qemu/hw/char/exynos4210_uart.c:677
#6 0xaaad275c8f4f in object_initialize_with_type /qemu/qom/object.c:516
#7 0xaaad275c91bb in object_new_with_type /qemu/qom/object.c:684
#8 0xaaad2755df2f in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:152
Guenter Roeck [Fri, 7 Feb 2020 17:45:48 +0000 (09:45 -0800)]
hw/arm: ast2600: Wire up EHCI controllers
Initialize EHCI controllers on AST2600 using the existing
TYPE_PLATFORM_EHCI. After this change, booting ast2600-evb
into Linux successfully instantiates a USB interface after
the necessary changes are made to its devicetree files.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-platform: EHCI generic platform driver
ehci-platform 1e6a3000.usb: EHCI Host Controller
ehci-platform 1e6a3000.usb: new USB bus registered, assigned bus number 1
ehci-platform 1e6a3000.usb: irq 25, io mem 0x1e6a3000
ehci-platform 1e6a3000.usb: USB 2.0 started, EHCI 1.00
usb usb1: Manufacturer: Linux 5.5.0-09825-ga0802f2d0ef5-dirty ehci_hcd
usb 1-1: new high-speed USB device number 2 using ehci-platform
Guenter Roeck [Thu, 6 Feb 2020 18:34:37 +0000 (10:34 -0800)]
hw/arm: ast2400/ast2500: Wire up EHCI controllers
Initialize EHCI controllers on AST2400 and AST2500 using the existing
TYPE_PLATFORM_EHCI. After this change, booting ast2500-evb into Linux
successfully instantiates a USB interface.
ehci-platform 1e6a3000.usb: EHCI Host Controller
ehci-platform 1e6a3000.usb: new USB bus registered, assigned bus number 1
ehci-platform 1e6a3000.usb: irq 21, io mem 0x1e6a3000
ehci-platform 1e6a3000.usb: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
Add definitions for all of the fields, up to ARMv8.5.
Convert the existing RESERVED register to a full register.
Query KVM for the value of the register for the host.
For aarch64, there's a dedicated msr (imm, reg) insn.
For aarch32, this is done via msr to cpsr. Writes from el0
are ignored, which is already handled by the CPSR_USER mask.
target/arm: Use aarch32_cpsr_valid_mask in helper_exception_return
Using ~0 as the mask on the aarch64->aarch32 exception return
was not even as correct as the CPSR_ERET_MASK that we had used
on the aarch32->aarch32 exception return.
Split this helper out of msr_mask in translate.c. At the same time,
transform the negative reductive logic to positive accumulative logic.
It will be usable along the exception paths.
target/arm: Add mmu_idx for EL1 and EL2 w/ PAN enabled
To implement PAN, we will want to swap, for short periods
of time, to a different privileged mmu_idx. In addition,
we cannot do this with flushing alone, because the AT*
instructions have both PAN and PAN-less versions.
Add the ARMMMUIdx*_PAN constants where necessary next to
the corresponding ARMMMUIdx* constant.
Heyi Guo [Tue, 4 Feb 2020 01:43:24 +0000 (09:43 +0800)]
arm/acpi: simplify the description of PCI _CRS
The original code defines a named object for the resource template but
then returns the resource template object itself; the resulted output
is like below:
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (RBUF, ResourceTemplate ()
{
WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
0x0000, // Granularity
0x0000, // Range Minimum
0x00FF, // Range Maximum
0x0000, // Translation Offset
0x0100, // Length
,, )
......
})
Return (ResourceTemplate ()
{
WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
0x0000, // Granularity
0x0000, // Range Minimum
0x00FF, // Range Maximum
0x0000, // Translation Offset
0x0100, // Length
,, )
......
})
}
So the named object "RBUF" is actually useless. The more natural way
is to return RBUF instead, or simply drop RBUF definition.
Heyi Guo [Tue, 4 Feb 2020 01:43:22 +0000 (09:43 +0800)]
arm/acpi: fix PCI _PRT definition
The address field in each _PRT mapping package should be constructed
with high word for device# and low word for function#, so it is wrong
to use bus_no as the high word. The existing code adds a bunch useless
entries with device #s above 31. Enumerate all possible slots
(i.e. PCI_SLOT_MAX) instead.
Heyi Guo [Tue, 4 Feb 2020 01:43:21 +0000 (09:43 +0800)]
arm/virt/acpi: remove _ADR from devices identified by _HID
According to ACPI spec, _ADR should be used for device on a bus that
has a standard enumeration algorithm, but not for device which is on
system bus and must be enumerated by OSPM. And it is not recommended
to contain both _HID and _ADR in a single device.
See ACPI 6.3, section 6.1, top of page 343:
A device object must contain either an _HID object or an _ADR object,
but should not contain both.
* remotes/bonzini/tags/for-upstream:
target/i386: enable monitor and ucode revision with -cpu max
target/i386: check for availability of MSR_IA32_UCODE_REV as an emulated MSR
target/i386: fix TCG UCODE_REV access
build: move TARGET_GPROF to config-host.mak
exec: do not define use_icount for user-mode emulation
minikconf: accept alnum identifiers
Remove support for CLOCK_MONOTONIC not being defined
seqlock: fix seqlock_write_unlock_impl function
vl: Don't mismatch g_strsplit()/g_free()
* remotes/kraxel/tags/ui-20200212-pull-request:
ui/cocoa: Drop workarounds for pre-10.12 OSX
ui: deprecate legacy -show-cursor option
ui: drop curor_hide global variable.
ui/gtk: implement show-cursor option
ui/cocoa: switch to new show-cursor option
ui/sdl: switch to new show-cursor option
ui: wire up legacy -show-cursor option
ui: add show-cursor option
ui/gtk: Fix gd_refresh_rate_millihz() when widget window is not realized
ui/gtk: Update gd_refresh_rate_millihz() to handle VirtualConsole
Juan Quintela [Wed, 29 Jan 2020 10:21:13 +0000 (11:21 +0100)]
git: Make submodule check only needed modules
If one is compiling more than one tree from the same source, it is
possible that they need different submodules. Change the check to see
that all modules that we are interested in are updated, discarding the
ones that we don't care about.
There's an assert in autoconverge that checks that we quit the
iteration when we go below the expected threshold. Philippe
saw a case where this assert fired with the measured value
slightly over the threshold. (about 3k out of a few million).
I can think of two reasons:
a) Rounding errors
b) That after we make the decision to quit iteration we do one
more sync and that sees a few more dirty pages.
So add 1% slack to the assertion, that should cover a and
most cases of b, probably all we'll see for the test.
rdma_accept_incoming_migration is called from an fd handler and
can't return an Error * anywhere.
Currently it's leaking Error's in errp/local_err - there's
no point putting them in there unless we can report them.
Turn most into fprintf's, and the last into an error_reportf_err
where it's coming up from another function.
Keqian Zhu [Tue, 4 Feb 2020 05:08:41 +0000 (13:08 +0800)]
migration: Optimization about wait-unplug migration state
qemu_savevm_nr_failover_devices() is originally designed to
get the number of failover devices, but it actually returns
the number of "unplug-pending" failover devices now. Moreover,
what drives migration state to wait-unplug should be the number
of "unplug-pending" failover devices, not all failover devices.
We can also notice that qemu_savevm_state_guest_unplug_pending()
and qemu_savevm_nr_failover_devices() is equivalent almost (from
the code view). So the latter is incorrect semantically and
useless, just delete it.
In the qemu_savevm_state_guest_unplug_pending(), once hit a
unplug-pending failover device, then it can return true right
now to save cpu time.
Zhimin Feng [Tue, 14 Jan 2020 09:43:09 +0000 (17:43 +0800)]
migration: Maybe VM is paused when migration is cancelled
If the migration is cancelled when it is in the completion phase,
the migration state is set to MIGRATION_STATUS_CANCELLING.
The VM maybe wait for the 'pause_sem' semaphore in migration_maybe_pause
function, so that VM always is paused.
Gerd Hoffmann [Thu, 6 Feb 2020 07:43:58 +0000 (08:43 +0100)]
qxl: introduce hardware revision 5
The only difference to hardware revision 4 is that the device doesn't
switch to VGA mode in case someone happens to touch a VGA register,
which should make things more robust in configurations with multiple
vga devices.
Swtiching back to VGA mode happens on reset, either full machine
reset or qxl device reset (QXL_IO_RESET ioport command).
Laurent Vivier [Tue, 4 Feb 2020 21:19:01 +0000 (22:19 +0100)]
linux-user: implement TARGET_SO_PEERSEC
"The purpose of this option is to allow an application to obtain the
security credentials of a Unix stream socket peer. It is analogous to
SO_PEERCRED (which provides authentication using standard Unix credentials
of pid, uid and gid), and extends this concept to other security
models." -- https://lwn.net/Articles/62370/
Until now it was passed to the kernel with an "int" argument and
fails when it was supported by the host because the parameter is
like a filename: it is always a \0-terminated string with no embedded
\0 characters, but is not guaranteed to be ASCII or UTF-8.
I've tested the option with the following program:
Laurent Vivier [Wed, 12 Feb 2020 12:56:58 +0000 (13:56 +0100)]
linux-user: fix use of SIGRTMIN
Some RT signals can be in use by glibc,
it's why SIGRTMIN (34) is generally greater than __SIGRTMIN (32).
So SIGRTMIN cannot be mapped to TARGET_SIGRTMIN.
Instead of swapping only SIGRTMIN and SIGRTMAX, map all the
range [TARGET_SIGRTMIN ... TARGET_SIGRTMAX - X] to
[__SIGRTMIN + X ... SIGRTMAX ]
(SIGRTMIN is __SIGRTMIN + X).
Laurent Vivier [Wed, 12 Feb 2020 12:56:55 +0000 (13:56 +0100)]
linux-user: add missing TARGET_SIGRTMIN for hppa
This signal is defined for all other targets and we will need it later
Signed-off-by: Laurent Vivier <[email protected]>
[pm: that this was actually an ABI change in the hppa kernel (at kernel
version 3.17, kernel commit 1f25df2eff5b25f52c139d). Before that
SIGRTMIN was 37...
All our other HPPA TARGET_SIG* values are for the updated
ABI following that commit, so using 32 for SIGRTMIN is
the right thing for us.] Reviewed-by: Peter Maydell <[email protected]> Tested-by: Taylor Simpson <[email protected]>
Message-Id: <20200212125658[email protected]> Signed-off-by: Laurent Vivier <[email protected]>
Gerd Hoffmann [Fri, 17 Jan 2020 07:37:16 +0000 (08:37 +0100)]
uas: fix super speed bMaxPacketSize0
For usb2 bMaxPacketSize0 is "n", for usb3 it is "1 << n",
so it must be 9 not 64 ...
rom "Universal Serial Bus 3.1 Specification":
If the device is operating at Gen X speed, the bMaxPacketSize0
field shall be set to 09H indicating a 512-byte maximum packet.
An Enhanced SuperSpeed device shall not support any other maximum
packet sizes for the default control pipe (endpoint 0) control
endpoint.
Gerd Hoffmann [Mon, 3 Feb 2020 11:41:08 +0000 (12:41 +0100)]
usb-host: wait for cancel complete
After canceling transfers call into libvirt so it can process the
request, and wait for it to complete. Also cancel all pending
transfers before exiting qemu.
Paolo Bonzini [Tue, 11 Feb 2020 17:47:48 +0000 (18:47 +0100)]
target/i386: enable monitor and ucode revision with -cpu max
These two features were incorrectly tied to host_cpuid_required rather than
cpu->max_features. As a result, -cpu max was not enabling either MONITOR
features or ucode revision.
Paolo Bonzini [Tue, 11 Feb 2020 17:55:16 +0000 (18:55 +0100)]
target/i386: check for availability of MSR_IA32_UCODE_REV as an emulated MSR
Even though MSR_IA32_UCODE_REV has been available long before Linux 5.6,
which added it to the emulated MSR list, a bug caused the microcode
version to revert to 0x100000000 on INIT. As a result, processors other
than the bootstrap processor would not see the host microcode revision;
some Windows version complain loudly about this and crash with a
fairly explicit MICROCODE REVISION MISMATCH error.
[If running 5.6 prereleases, the kernel fix "KVM: x86: do not reset
microcode version on INIT or RESET" should also be applied.]
Paolo Bonzini [Thu, 6 Feb 2020 17:10:22 +0000 (18:10 +0100)]
target/i386: fix TCG UCODE_REV access
This was a very interesting semantic conflict that caused git to move
the MSR_IA32_UCODE_REV read to helper_wrmsr. Not a big deal, but
still should be fixed...
Peter Maydell [Sat, 1 Feb 2020 17:22:52 +0000 (17:22 +0000)]
Remove support for CLOCK_MONOTONIC not being defined
Some older parts of QEMU's codebase assume that CLOCK_MONOTONIC
might not be defined by the host OS, and have workarounds to
deal with this. However, more recently (notably in commit 50290c002c045280f8d for qemu-img in mid-2019, but also much
earlier in 2011 in commit 22795174a37e0 for ui/spice-display.c)
we've written code that assumes CLOCK_MONOTONIC is always
defined. The only host OS anybody's ever noticed this on
is OSX 10.11 and earlier, which we don't support.
So we can assume that all our host OSes have the #define,
and we can remove some now-unnecessary ifdefs.
Luc Michel [Wed, 29 Jan 2020 14:49:48 +0000 (15:49 +0100)]
seqlock: fix seqlock_write_unlock_impl function
The seqlock write unlock function was incorrectly calling
seqlock_write_begin() instead of seqlock_write_end(), and was releasing
the lock before incrementing the sequence. This could lead to a race
condition and a corrupted sequence number becoming odd even though the
lock is not held.
Pan Nengyuan [Fri, 10 Jan 2020 09:17:09 +0000 (17:17 +0800)]
vl: Don't mismatch g_strsplit()/g_free()
It's a mismatch between g_strsplit and g_free, it will cause a memory leak as follow:
[root@localhost]# ./aarch64-softmmu/qemu-system-aarch64 -accel help
Accelerators supported in QEMU binary:
tcg
kvm
=================================================================
==1207900==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 8 byte(s) in 2 object(s) allocated from:
#0 0xfffd700231cb in __interceptor_malloc (/lib64/libasan.so.4+0xd31cb)
#1 0xfffd6ec57163 in g_malloc (/lib64/libglib-2.0.so.0+0x57163)
#2 0xfffd6ec724d7 in g_strndup (/lib64/libglib-2.0.so.0+0x724d7)
#3 0xfffd6ec73d3f in g_strsplit (/lib64/libglib-2.0.so.0+0x73d3f)
#4 0xaaab66be5077 in main /mnt/sdc/qemu-master/qemu-4.2.0-rc0/vl.c:3517
#5 0xfffd6e140b9f in __libc_start_main (/lib64/libc.so.6+0x20b9f)
#6 0xaaab66bf0f53 (./build/aarch64-softmmu/qemu-system-aarch64+0x8a0f53)
Direct leak of 2 byte(s) in 2 object(s) allocated from:
#0 0xfffd700231cb in __interceptor_malloc (/lib64/libasan.so.4+0xd31cb)
#1 0xfffd6ec57163 in g_malloc (/lib64/libglib-2.0.so.0+0x57163)
#2 0xfffd6ec7243b in g_strdup (/lib64/libglib-2.0.so.0+0x7243b)
#3 0xfffd6ec73e6f in g_strsplit (/lib64/libglib-2.0.so.0+0x73e6f)
#4 0xaaab66be5077 in main /mnt/sdc/qemu-master/qemu-4.2.0-rc0/vl.c:3517
#5 0xfffd6e140b9f in __libc_start_main (/lib64/libc.so.6+0x20b9f)
#6 0xaaab66bf0f53 (./build/aarch64-softmmu/qemu-system-aarch64+0x8a0f53)
Peter Maydell [Sat, 1 Feb 2020 17:05:34 +0000 (17:05 +0000)]
ui/cocoa: Drop workarounds for pre-10.12 OSX
Our official OSX support policy covers the last two released versions.
Currently that is 10.14 and 10.15. We also may work on older versions, but
don't guarantee it.
In commit 50290c002c045280f8d in mid-2019 we introduced some uses of
CLOCK_MONOTONIC which incidentally broke compilation for pre-10.12 OSX
versions (see LP:1861551). We don't intend to fix that, so we might
as well drop the code in ui/cocoa.m which caters for pre-10.12
versions as well. (For reference, 10.11 fell out of Apple extended
security support in September 2018.)
projects / qemu.git / log