Anthony Liguori [Wed, 2 Jan 2013 14:01:36 +0000 (08:01 -0600)]
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci,virtio
This optimizes MSIX handling in virtio-pci.
Also included is pci express capability bugfix.
Signed-off-by: Michael S. Tsirkin <[email protected]> Signed-off-by: Anthony Liguori <[email protected]>
* mst/tags/for_anthony:
virtio-pci: don't poll masked vectors
msix: expose access to masked/pending state
msi: add API to get notified about pending bit poll
pcie: Fix bug in pcie_ext_cap_set_next
virtio: make bindings typesafe
target-mips: Use EXCP_SC rather than a magic number
From the discussion on the ML [1], the exception limit defined by
magic number 0x100 is actually EXCP_SC defined in cpu.h. Replace the
magic number with EXCP_SC. Remove "#if 1 .. #endif" as well.
Jovanovic, Petar [Tue, 11 Dec 2012 15:06:35 +0000 (15:06 +0000)]
target-mips: Make repl_ph to sign extend to target-long
The immediate value is 9bits, should sign-extend to 16bits. The return value to
register should sign-extend to target_long, as Richard says, removing an
unnecessary cast works fun.
Petar Jovanovic [Mon, 10 Dec 2012 15:28:17 +0000 (16:28 +0100)]
target-mips: Fix for helpers for EXTR_* instructions
The change removes some unnecessary and incorrect code for EXTR_S.H.
Further, it corrects the mask for shift value in the EXTR_ instructions. It also
extends the existing tests so they trigger the issues corrected with the change.
Petar Jovanovic [Thu, 6 Dec 2012 19:30:35 +0000 (20:30 +0100)]
target-mips: Fix incorrect reads and writes to DSPControl register
Upper 4 bits of ccond (bits 31..28 ) of DSPControl register are not used in
the MIPS32 architecture. They are used in the MIPS64 architecture. For MIPS32
these bits must be written as zero, and return zero on read.
The change fixes writes (WRDSP) and reads (RDDSP) to the register. It also fixes
the tests that use these instructions, and makes them smaller and simpler.
Blue Swirl [Fri, 28 Dec 2012 16:08:23 +0000 (16:08 +0000)]
Merge branch 'qom-cpu' of git://repo.or.cz/qemu/afaerber
* 'qom-cpu' of git://repo.or.cz/qemu/afaerber:
MAINTAINERS: Include X86CPU in CPU maintenance area
cpu: Move kvm_run into CPUState
cpu: Move kvm_state field into CPUState
ppc_booke: Pass PowerPCCPU to ppc_booke_timers_init()
ppc4xx_devs: Return PowerPCCPU from ppc4xx_init()
ppc_booke: Pass PowerPCCPU to {decr,fit,wdt} timer callbacks
ppc: Pass PowerPCCPU to [h]decr timer callbacks
ppc: Pass PowerPCCPU to [h]decr callbacks
ppc: Pass PowerPCCPU to ppc_set_irq()
kvm: Pass CPUState to kvm_vcpu_ioctl()
kvm: Pass CPUState to kvm_arch_*
cpu: Move kvm_fd into CPUState
qdev-properties.c: Separate core from the code used only by qemu-system-*
qdev: Coding style fixes
cpu: Introduce CPUListState struct
target-alpha: Add support for -cpu ?
target-alpha: Turn CPU definitions into subclasses
target-alpha: Avoid leaking the alarm timer over reset
alpha: Pass AlphaCPU array to Typhoon
target-alpha: Let cpu_alpha_init() return AlphaCPU
At the moment, when irqfd is in use but a vector is masked,
qemu will poll it and handle vector masks in userspace.
Since almost no one ever looks at the pending bits,
it is better to defer this until pending bits
are actually read.
Implement this optimization using the new poll notifier.
Robert Schiele [Tue, 4 Dec 2012 15:58:08 +0000 (16:58 +0100)]
configure: allow disabling pixman if not needed
When we build neither any system emulation targets nor the tools there
is actually no need for pixman library. In that case do not enforce
presence of that library on the system.
* Do not depend on "qemu-timer-common.o".
* Use "$(obj)" in rules to refer to the build sub-directory.
* Remove dependencies against "$(GENERATED_HEADERS)".
Eduardo Habkost [Thu, 20 Dec 2012 18:43:48 +0000 (16:43 -0200)]
target-i386: CPUID: return highest basic leaf if eax > cpuid_xlevel
This fixes a subtle bug. A bug that probably won't cause trouble for any
existing OS, but a bug anyway:
Intel SDM Volume 2, CPUID Instruction states:
> Two types of information are returned: basic and extended function
> information. If a value entered for CPUID.EAX is higher than the maximum
> input value for basic or extended function for that processor then the
> data for the highest basic information leaf is returned. For example,
> using the Intel Core i7 processor, the following is true:
>
> CPUID.EAX = 05H (* Returns MONITOR/MWAIT leaf. *)
> CPUID.EAX = 0AH (* Returns Architectural Performance Monitoring leaf. *)
> CPUID.EAX = 0BH (* Returns Extended Topology Enumeration leaf. *)
> CPUID.EAX = 0CH (* INVALID: Returns the same information as CPUID.EAX = 0BH. *)
> CPUID.EAX = 80000008H (* Returns linear/physical address size data. *)
> CPUID.EAX = 8000000AH (* INVALID: Returns same information as CPUID.EAX = 0BH. *)
AMD's CPUID Specification, on the other hand, is less specific:
> The CPUID instruction supports two sets or ranges of functions,
> standard and extended.
>
> • The smallest function number of the standard function range is
> Fn0000_0000. The largest function num- ber of the standard function
> range, for a particular implementation, is returned in CPUID
> Fn0000_0000_EAX.
>
> • The smallest function number of the extended function range is
> Fn8000_0000. The largest function num- ber of the extended function
> range, for a particular implementation, is returned in CPUID
> Fn8000_0000_EAX.
>
> Functions that are neither standard nor extended are undefined and
> should not be relied upon.
QEMU's behavior matched Intel's specification before, but this was
changed by commit b3baa152aaef1905876670590275c2dd0bbb088c. This patch
restores the behavior documented by Intel when cpuid_xlevel2 is 0.
The existing behavior when cpuid_xlevel2 is set (falling back to
level=cpuid_xlevel) is being kept, as I couldn't find any public
documentation on the CPUID 0xC0000000 function range on Centaur CPUs.
Lei Li [Fri, 21 Dec 2012 04:26:38 +0000 (12:26 +0800)]
qemu-char: Inherit ptys and improve output from -serial pty
Changes since V1:
- Avoid crashing since qemu_opts_id() may return null on some
systems according to Markus's suggestion.
When controlling a qemu instance from another program, it's
hard to know which serial port or monitor device is redirected
to which pty. With more than one device using "pty" a lot of
guesswork is involved.
$ ./x86_64-softmmu/qemu-system-x86_64 -serial pty -serial pty -monitor pty
char device redirected to /dev/pts/5
char device redirected to /dev/pts/6
char device redirected to /dev/pts/7
Although we can find out what everything else is connected to
by the "info chardev" with "-monitor stdio" in the command line,
It'd be very useful to be able to have qemu inherit pseudo-tty
file descriptors so they could just be specified on the command
line like:
$ ./x86_64-softmmu/qemu-system-x86_64 -serial pty -serial pty -monitor pty
char device compat_monitor0 redirected to /dev/pts/5
char device serial0 redirected to /dev/pts/6
char device serial1 redirected to /dev/pts/7
Liming Wang [Fri, 21 Dec 2012 08:56:58 +0000 (16:56 +0800)]
net: add missing include file
To fix building error:
CC net/vde.o
net/vde.c: In function ‘vde_cleanup’:
net/vde.c:65:5: error: implicit declaration of function ‘qemu_set_fd_handler’ [-Werror=implicit-function-declaration]
net/vde.c:65:5: error: nested extern declaration of ‘qemu_set_fd_handler’ [-Werror=nested-externs]
cc1: all warnings being treated as errors
translate-all.c: Use tb1->phys_hash_next directly in tb_remove
When tb_remove was first commited at fd6ce8f6, there were three different
calls pass different names to offsetof. In current codebase, the other two
calls are replaced with tb_page_remove. There is no need to have a general
tb_remove. Omit passing the third parameter and using tb1->phys_hash_next
directly.
Paolo Bonzini [Thu, 20 Dec 2012 11:29:19 +0000 (12:29 +0100)]
build: fix includes for VNC
vnc-tls.h is included by vnc.h, and it includes gnutls/gnutls.h.
Hence, GnuTLS header files are needed by all files that include
vnc.h, most notably qmp.c. Move these flags to QEMU_CFLAGS for
simplicity.
Juan Quintela [Wed, 19 Dec 2012 08:55:50 +0000 (09:55 +0100)]
migration: merge QEMUFileBuffered into MigrationState
Avoid splitting the state of outgoing migration, more or less arbitrarily,
between two data structures. QEMUFileBuffered anyway is used only during
migration.
Juan Quintela [Mon, 10 Dec 2012 12:27:50 +0000 (13:27 +0100)]
ram: refactor ram_save_block() return value
It could only return 0 if we only found dirty xbzrle pages that hadn't
changed (i.e. they were written with the same content). We don't care
about that case, it is the same than nothing dirty.
So now the return of the function is how much have it written, nothing
else. Adjust callers.
And we also made ram_save_iterate() return the number of transferred
bytes, not the number of transferred pages.
Juan Quintela [Wed, 17 Oct 2012 22:00:59 +0000 (00:00 +0200)]
ram: optimize migration bitmap walking
Instead of testing each page individually, we search what is the next
dirty page with a bitmap operation. We have to reorganize the code to
move from a "for" loop, to a while(dirty) loop.
Juan Quintela [Fri, 21 Sep 2012 09:18:18 +0000 (11:18 +0200)]
savevm: New save live migration method: pending
Code just now does (simplified for clarity)
if (qemu_savevm_state_iterate(s->file) == 1) {
vm_stop_force_state(RUN_STATE_FINISH_MIGRATE);
qemu_savevm_state_complete(s->file);
}
Problem here is that qemu_savevm_state_iterate() returns 1 when it
knows that remaining memory to sent takes less than max downtime.
But this means that we could end spending 2x max_downtime, one
downtime in qemu_savevm_iterate, and the other in
qemu_savevm_state_complete.
Changed code to:
pending_size = qemu_savevm_state_pending(s->file, max_size);
DPRINTF("pending size %lu max %lu\n", pending_size, max_size);
if (pending_size >= max_size) {
ret = qemu_savevm_state_iterate(s->file);
} else {
vm_stop_force_state(RUN_STATE_FINISH_MIGRATE);
qemu_savevm_state_complete(s->file);
}
So what we do is: at current network speed, we calculate the maximum
number of bytes we can sent: max_size.
Then we ask every save_live section how much they have pending. If
they are less than max_size, we move to complete phase, otherwise we
do an iterate one.
This makes things much simpler, because now individual sections don't
have to caluclate the bandwidth (it was implossible to do right from
there).
Umesh Deshpande [Wed, 17 Aug 2011 07:01:33 +0000 (00:01 -0700)]
protect the ramlist with a separate mutex
Add the new mutex that protects shared state between ram_save_live
and the iothread. If the iothread mutex has to be taken together
with the ramlist mutex, the iothread shall always be _outside_.
Paolo Bonzini [Wed, 14 Nov 2012 14:45:02 +0000 (15:45 +0100)]
exec: change ramlist from MRU order to a 1-item cache
Most of the time, only 2 items will be active (from/to for a string operation,
or code/data). But TCG guests likely won't have gigabytes of memory, so
this actually goes down to 1 item.
Kevin O'Connor (6):
floppy: Minor - reduce handle_0e code size when CONFIG_FLOPPY is disabled.
vga: Minor comment spelling fix.
Don't recursively evaluate CFLAGS variables.
Don't use gcc's -combine option.
Add compile checking phase to build.
acpi: Use prt_slot() macro to describe irq pins of first PCI device.
Laszlo Ersek (1):
maininit(): print machine UUID under seabios version message
Anthony Liguori [Wed, 19 Dec 2012 23:15:39 +0000 (17:15 -0600)]
Merge remote-tracking branch 'bonzini/header-dirs' into staging
* bonzini/header-dirs: (45 commits)
janitor: move remaining public headers to include/
hw: move executable format header files to hw/
fpu: move public header file to include/fpu
softmmu: move remaining include files to include/ subdirectories
softmmu: move include files to include/sysemu/
misc: move include files to include/qemu/
qom: move include files to include/qom/
migration: move include files to include/migration/
monitor: move include files to include/monitor/
exec: move include files to include/exec/
block: move include files to include/block/
qapi: move include files to include/qobject/
janitor: add guards to headers
qapi: make struct Visitor opaque
qapi: remove qapi/qapi-types-core.h
qapi: move inclusions of qemu-common.h from headers to .c files
ui: move files to ui/ and include/ui/
qemu-ga: move qemu-ga files to qga/
net: reorganize headers
net: move net.c to net/
...
Andreas Färber [Sun, 9 Dec 2012 19:15:31 +0000 (20:15 +0100)]
MAINTAINERS: Include X86CPU in CPU maintenance area
Document that the x86 CPU refactorings are going through the qom-cpu
tree. This does not contradict the established practice that patches
adding KVM features to the x86 CPU go through the KVM maintainers,
it merely takes it out of target-i386 TCG's Odd Fixes status.
Eduardo Habkost [Wed, 5 Dec 2012 16:49:11 +0000 (14:49 -0200)]
qdev-properties.c: Separate core from the code used only by qemu-system-*
This separates the qdev properties code in two parts:
- qdev-properties.c, that contains most of the qdev properties code;
- qdev-properties-system.c for code specific for qemu-system-*,
containing:
- Property types: drive, chr, netdev, vlan, that depend on code that
won't be included on *-user
- qemu_add_globals(), that depends on qemu-config.o.
This change should help on two things:
- Allowing DeviceState to be used by *-user without pulling
dependencies that are specific for qemu-system-*;
- Writing qdev unit tests without pulling too many dependencies.
The copyright/license of qdev-properties.c isn't explicitly stated at
the file, so add a simple copyright/license header pointing to the
commit ID of the original file.
projects / qemu.git / log