Fix compilation warning due to incorrectly specified type
In audio/coreaudio.c, a variable named "str" was assigned "const char" values,
which resulted in the following warnings:
-----8<-----
audio/coreaudio.c: In function ‘coreaudio_logstatus’:
audio/coreaudio.c:59: warning: initialization discards qualifiers from pointer target type
audio/coreaudio.c:63: warning: assignment discards qualifiers from pointer target type
(...)
-----8<-----
Peter Maydell [Thu, 9 Jun 2011 21:54:29 +0000 (22:54 +0100)]
configure: Detect and don't try to use older libcurl
Older versions of libcurl don't have some of the features we try to
use, in particular curl_multi_setopt(). Check for this in the 'is
libcurl available?' configure test so we disable curl support if the
library is too old.
Alexander Graf [Wed, 8 Jun 2011 22:55:37 +0000 (00:55 +0200)]
sigfd: use pthread_sigmask
Qemu uses signalfd to figure out, if a signal occured without the need
to actually receive the signal. Instead, it can read from the fd to receive
its news.
Now, we obviously don't always have signalfd around. Especially not on
non-Linux systems. So what we do there is that we create a new thread,
block that thread on all signals and simply call sigwait to wait for a
signal we're interested in to occur.
This all sounds great, but what we're really doing is:
which - on Darwin - blocks all signals on the current _process_, not only
on the current thread. To block signals on the thread, we can use
pthread_sigmask().
This patch does that, assuming that my above analysis is correct, and thus
renders Qemu useable on Darwin again.
Merge remote branch 'rth/axp-next' into alpha-merge
* rth/axp-next: (26 commits)
target-alpha: Implement TLB flush primitives.
target-alpha: Use a fixed frequency for the RPCC in system mode.
target-alpha: Trap for unassigned and unaligned addresses.
target-alpha: Remap PIO space for 43-bit KSEG for EV6.
target-alpha: Implement cpu_alpha_handle_mmu_fault for system mode.
target-alpha: Implement more CALL_PAL values inline.
target-alpha: Disable interrupts properly.
target-alpha: All ISA checks to use TB->FLAGS.
target-alpha: Swap shadow registers moving to/from PALmode.
target-alpha: Implement do_interrupt for system mode.
target-alpha: Add IPRs to be used by the emulation PALcode.
target-alpha: Use kernel mmu_idx for pal_mode.
target-alpha: Add various symbolic constants.
target-alpha: Use do_restore_state for arithmetic exceptions.
target-alpha: Tidy up arithmetic exceptions.
target-alpha: Tidy exception constants.
target-alpha: Enable the alpha-softmmu target.
target-alpha: Rationalize internal processor registers.
target-alpha: Merge HW_REI and HW_RET implementations.
target-alpha: Cleanup MMU modes.
...
Kevin Wolf [Wed, 1 Jun 2011 12:03:31 +0000 (14:03 +0200)]
bdrv_img_create: Fix segfault
Block drivers that don't support creating images don't have a size option. Fail
gracefully instead of segfaulting when trying to access the option's value.
Josh Durgin [Thu, 26 May 2011 23:07:32 +0000 (16:07 -0700)]
rbd: allow configuration of rados from the rbd filename
The new format is rbd:pool/image[@snapshot][:option1=value1[:option2=value2...]]
Each option is used to configure rados, and may be any Ceph option, or "conf".
The "conf" option specifies a Ceph configuration file to read.
This allows rbd volumes from more than one Ceph cluster to be used by
specifying different monitor addresses, as well as having different
logging levels or locations for different volumes.
Christoph Egger [Tue, 24 May 2011 09:30:29 +0000 (11:30 +0200)]
block/raw-posix: use a character device if a block device is given
On NetBSD a userland process is better with the character device
interface. In addition, a block device can't be opened twice; if a Xen
backend opens it, qemu can't and vice-versa.
Alexander Graf [Tue, 24 May 2011 22:46:55 +0000 (00:46 +0200)]
vmdk: fix endianness bugs
The vmdk code is sloppy when handling the header descriptor during
creation of an image. Fix all header accesses in the create path to
either store native endianness or convert it when appropriate.
Change BDRV_O_NOCACHE to only imply bypassing the host OS file cache,
but no writeback semantics. All existing callers are changed to also
specify BDRV_O_CACHE_WB to give them writeback semantics.
Kevin Wolf [Thu, 19 May 2011 14:42:24 +0000 (16:42 +0200)]
ide/core: Remove explicit setting of BM_STATUS_INT
BM_STATUS_INT is automatically set during ide_set_irq(), there's no reason to
set it manually in addition.
There is even one case where the interrupt status bit was set, but no IRQ was
raised. This is when the PRD table was reached but there is more data to
transfer. The correct behaviour for this case is not to set BM_STATUS_INT.
Martin Simmons [Mon, 6 Jun 2011 14:49:17 +0000 (15:49 +0100)]
target-i386: Make x86 mfence and lfence illegal without SSE2
While trying to use qemu -cpu pentium3 to test for incorrect uses of certain
SSE2 instructions, I found that QEMU allowed the mfence and lfence
instructions to be executed even though Pentium 3 doesn't support them.
According to the processor specs (and experience on a real Pentium 3), these
instructions are only available with SSE2, but QEMU is checking for SSE. The
check for the related sfence instruction is correct (it works with SSE).
Alexander Graf [Sat, 4 Jun 2011 05:25:59 +0000 (07:25 +0200)]
slirp: fix guestfwd id
When using -net user,guestfwd=... Qemu immediately complains about the id
being in invalid format. This is because we pass in an id that contains a
colon, while the id restrictions don't allow colons.
This patch changes the colon into a dot, making guestfwd work again.
Fix compilation warning due to missing header for sigaction
Fix the following warning by including signal.h directly in qemu-common.h
----8<----
iohandler.c: In function ‘qemu_init_child_watch’:
iohandler.c:172: warning: implicit declaration of function ‘sigaction’
iohandler.c:172: warning: nested extern declaration of ‘sigaction’
----8<----
Glauber Costa [Mon, 16 May 2011 18:45:08 +0000 (15:45 -0300)]
Add an isa device for SGA
This patch adds a dummy legacy ISA device whose responsibility is to
deploy sgabios, an option rom for a serial graphics adapter.
The proposal is that this device is always-on when -nographics,
but can otherwise be enable in any setup when -device sga is used.
[v2: suggestions on qdev by Markus ]
[v3: cleanups and documentation, per list suggestions ]
Michael Roth [Wed, 1 Jun 2011 17:14:59 +0000 (12:14 -0500)]
json-streamer: add handling for JSON_ERROR token/state
This allows a JSON_ERROR state to be passed to the streamer to force a
flush of the current tokens and pass a NULL token list to the parser
rather that have it churn on bad data. (Alternatively we could just not
pass it to the parser at all, but it may be useful to push there errors
up the stack. NULL token lists are not currently handled by the parser,
the next patch will address that)
Michael Roth [Wed, 1 Jun 2011 17:14:58 +0000 (12:14 -0500)]
json-lexer: make lexer error-recovery more deterministic
Currently when we reach an error state we effectively flush everything
fed to the lexer, which can put us in a state where we keep feeding
tokens into the parser at arbitrary offsets in the stream. This makes it
difficult for the lexer/tokenizer/parser to get back in sync when bad
input is made by the client.
With these changes we emit an error state/token up to the tokenizer as
soon as we reach an error state, and continue processing any data passed
in rather than bailing out. The reset token will be used to reset the
tokenizer and parser, such that they'll recover state as soon as the
lexer begins generating valid token sequences again.
We also map chr(192,193,245-255) to an error state here, since they are
invalid UTF-8 characters. QMP guest proxy/agent will use chr(255) to
force a flush/reset of previous input for reliable delivery of certain
events, so also we document that thoroughly here.
Michael Roth [Wed, 1 Jun 2011 17:14:57 +0000 (12:14 -0500)]
json-lexer: fix flushing logic to not always go to error state
Currently we flush the lexer by passing in a NULL character. This
generally forces the lexer to go to the corresponding TERMINAL() state
for whatever token type it is currently parsing, emits the token to the
parser, then puts the lexer back into IN_START state. However, since a
NULL character causes char_consumed to be 0, we always do a second pass
after this, which puts us in the IN_ERROR state. Fix this behavior by
adding a "flush" flag that tells the lexer not to do a more than 1
iteration.
Luiz Capitulino [Wed, 1 Jun 2011 17:14:47 +0000 (12:14 -0500)]
QError: Introduce qerror_format_desc()
Refactor non-QError-specific bits out of qerror_human() into general
function that can be used by the error_get_pretty() analogue in the
new error-propagation framework.
Anthony Liguori [Mon, 6 Jun 2011 13:25:06 +0000 (08:25 -0500)]
Fix regression introduced by -machine accel=
Commit 85097db6 changed the timing when kvm_allowed is set until after
kvm is initialized. During initialization, the ioeventfd initialization code
checks kvm_enabled() and after this change, ioeventfd is effectively disabled.
This causes a significant regression in performance.
Fix this by setting kvm_allowed before calling init.
Turn on SASL support by appending "sasl" to the spice arguments, which
requires that the client use SASL to authenticate with the spice. The
exact choice of authentication method used is controlled from the
system / user's SASL configuration file for the 'qemu' service. This
is typically found in /etc/sasl2/qemu.conf. If running QEMU as an
unprivileged user, an environment variable SASL_CONF_PATH can be used
to make it search alternate locations for the service config. While
some SASL auth methods can also provide data encryption (eg GSSAPI),
it is recommended that SASL always be combined with the 'tls' and
'x509' settings to enable use of SSL and server certificates. This
ensures a data encryption preventing compromise of authentication
credentials.
Hans de Goede [Tue, 22 Mar 2011 15:28:41 +0000 (16:28 +0100)]
spice-qemu-char: Fix flow control in client -> guest direction
In the old spice-vmc device we used to have:
last_out = virtio_serial_write(&svc->port, p, MIN(len, VMC_MAX_HOST_WRITE));
if (last_out > 0)
...
Now in the chardev backend we have:
last_out = MIN(len, VMC_MAX_HOST_WRITE);
qemu_chr_read(scd->chr, p, last_out);
if (last_out > 0) {
...
Which causes us to no longer detect if the virtio port is not ready
to receive data from us. chardev actually has a mechanism to detect this,
but it requires a separate call to qemu_chr_can_read, before calling
qemu_chr_read (which return void).
This patch uses qemu_chr_can_read to fix the flow control from client to
guest.
Arun Thomas [Thu, 28 Apr 2011 14:11:11 +0000 (16:11 +0200)]
multiboot: set boot_device to first partition
The multiboot info struct's 'boot_device' field has 'part1' set to 0x01, which
maps to the second primary partition. To specify the first primary partition,
'part1' should be set to 0x00, since partition numbers start from zero
according to the multiboot spec.
Peter Maydell [Fri, 27 May 2011 12:12:13 +0000 (13:12 +0100)]
tcg: If DEBUG_TCGV, distinguish TCGv_ptr from TCGv_i32/TCGv_i64
When compiling with DEBUG_TCGV enabled, make the TCGv_ptr type distinct
from TCGv_i32/TCGv_i64. This means that using an i32 or i64 TCG op to
manipulate a TCGv_ptr will always be detected at compile time, rather
than only if compiling on a host system with the other word size.
NB: the tcg_add_ptr and tcg_sub_ptr macros have been removed as they
were not used anywhere.
Peter Maydell [Fri, 27 May 2011 12:12:12 +0000 (13:12 +0100)]
tcg/tcg-op.h: Fix prototypes for ld/st functions on 64 bit hosts
The prototypes for the ld/st functions on a 64 bit host declared
the address parameter as a TCGv_i64 rather than a TCGv_ptr. This
worked OK (since the two are aliases), but needs to be fixed to
allow extension of TCG type debugging to i64/i32/ptr mismatches.
Brad [Thu, 26 May 2011 03:06:00 +0000 (23:06 -0400)]
Use the correct header in the TCG MIPS code to find cacheflush() on OpenBSD.
Use the correct header in the TCG MIPS code to find cacheflush() on OpenBSD
to fix compilation of the MIPS host support for OpenBSD/mips64 based architecures.
Alexander Graf [Mon, 30 May 2011 08:49:45 +0000 (10:49 +0200)]
s390x: fix cksm instruction
The cksm instruction was implemented incorrectly, rendering UDP and TCP
checksum calculation wrong, making an emulated s390x Linux guest break
in most networking operations.
This patch fixes odd end checksum calculation, takes the input register
as input for the checksum and optimizes the overflow pieces by a bit.
Alexander Graf [Sat, 28 May 2011 00:12:33 +0000 (02:12 +0200)]
s390x: free tmp explicitly in every opcode for disas_a5()
The disas_a5() function provided a TCG tmp variable which was populated
by the respective opcode implementations, but freed at the end of the
function in generic code.
That makes it really hard for code review, so let's move the freeing
to the same scope as the actual allocation.
Alexander Graf [Fri, 27 May 2011 01:23:26 +0000 (03:23 +0200)]
PPC: fix mpc8544ds pci default devices
After the Qdev'ification of the MPC8544DS board and PCI bus, the internal
PCI bus name changed from "pci" to "pci.0". Reflect this change in the
search for that bus.
This patch enables networking on e500 guests again.
Alexander Graf [Wed, 25 May 2011 13:04:42 +0000 (15:04 +0200)]
PPC: fix sregs usage on booke
When compiling qemu with kvm support on BookE PPC machines, I get
the following error:
cc1: warnings being treated as errors
/tmp/qemu/target-ppc/kvm.c: In function 'kvm_arch_get_registers':
/tmp/qemu/target-ppc/kvm.c:188: error: unused variable 'sregs'
This is due to overly ambitious #ifdef'ery introduced in 90dc88.
Fix it by keeping code that doesn't depend on new headers alive
for the compiler, but never executed due to failing capability
checks.
Stefan Weil [Fri, 20 May 2011 20:30:19 +0000 (22:30 +0200)]
ppc: Fix compilation for ppc64-softmmu
When QEMU was configured with --enable-debug-tcg,
compilation fails in spr_write_booke206_mmucsr0() and in
spr_write_booke_pid(). Similar changes are also needed
in conditional code which is normally unused.
Current rpath inline function is heavily used in all system calls.
This function has a static buffer making it a non-thread safe function.
This patch introduces new thread-safe routine and makes use of it.
Stefan Weil [Wed, 1 Jun 2011 07:05:14 +0000 (12:35 +0530)]
virtio-9p: Use relative includes for files in hw
Commit 353ac78d495ef976242abd868f68d78420861c2c moved the files
without fixing the include paths. It used a modified CFLAGS
to add hw to the include search path, but this breaks builds
where the user wants to set special CFLAGS. Long include paths
also increase compilation time.
Therefore this patch removes the special CFLAGS for virtio
and fixes the include statements by using relative include paths.
v2: Remove special CFLAGS.
v3: Update needed for latest QEMU.
projects / qemu.git / log