Peter Maydell [Thu, 5 Jun 2014 22:05:07 +0000 (23:05 +0100)]
Merge remote-tracking branch 'remotes/mcayland/qemu-sparc' into staging
* remotes/mcayland/qemu-sparc:
apb: implement IOMMU translation for PCI host bridge
apb: handle reading/writing of IOMMU control registers
apb: fix IOMMU register sizes
apb: Move IOMMU registers into a separate IOMMUState struct
tcx: move initialisation from realizefn to initfn
tcx: move initialisation from SysBusDevice class to TCX class realizefn
cg3: add extra check to prevent CG3 register array overflow
cg3: move initialisation from realizefn to initfn
Peter Maydell [Thu, 5 Jun 2014 20:52:37 +0000 (21:52 +0100)]
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,virtio,qdev fixes, tests
new tests for SMBIOS
SMBIOS fixes
pc, pci fixes
qdev patches stayed on list for a month with no review,
as I told people on KVM forum I'm merging stuch patches
if they look fine.
Signed-off-by: Michael S. Tsirkin <[email protected]>
* remotes/mst/tags/for_upstream:
qdev: Add test of qdev_prop_check_global
qdev: Display warning about unused -global
tests: add smbios testing
tests: rename acpi-test to bios-tables-test
virtio-balloon: return empty data when no stats are available
pcie_host: Turn pcie_host_init() into an instance_init
SMBIOS: Fix type 17 field sizes
SMBIOS: Update Type 0 struct generator for machines >= 2.1
SMBIOS: Fix endian-ness when populating multi-byte fields
serial-pci: Set prog interface field of pci config to 16550 compatible
Conflicts:
include/hw/i386/pc.h
[PMM: fixed trivial conflict in pc.h] Signed-off-by: Peter Maydell <[email protected]>
Peter Maydell [Thu, 5 Jun 2014 20:06:13 +0000 (21:06 +0100)]
Merge remote-tracking branch 'remotes/bonzini/softmmu-smap' into staging
* remotes/bonzini/softmmu-smap: (33 commits)
target-i386: cleanup x86_cpu_get_phys_page_debug
target-i386: fix protection bits in the TLB for SMEP
target-i386: support long addresses for 4MB pages (PSE-36)
target-i386: raise page fault for reserved bits in large pages
target-i386: unify reserved bits and NX bit check
target-i386: simplify pte/vaddr calculation
target-i386: raise page fault for reserved physical address bits
target-i386: test reserved PS bit on PML4Es
target-i386: set correct error code for reserved bit access
target-i386: introduce support for 1 GB pages
target-i386: introduce do_check_protect label
target-i386: tweak handling of PG_NX_MASK
target-i386: commonize checks for PAE and non-PAE
target-i386: commonize checks for 4MB and 4KB pages
target-i386: commonize checks for 2MB and 4KB pages
target-i386: fix coding standards in x86_cpu_handle_mmu_fault
target-i386: simplify SMAP handling in MMU_KSMAP_IDX
target-i386: fix kernel accesses with SMAP and CPL = 3
target-i386: move check_io helpers to seg_helper.c
target-i386: rename KSMAP to KNOSMAP
...
Mark Cave-Ayland [Wed, 28 May 2014 07:28:22 +0000 (08:28 +0100)]
apb: handle reading/writing of IOMMU control registers
While the registers are documented as being 64-bit, Linux seems to access
them in two halves as 2 x 32-bit accesses. Make sure that we can correctly
handle this case.
Mark Cave-Ayland [Sat, 24 May 2014 10:51:50 +0000 (11:51 +0100)]
cg3: add extra check to prevent CG3 register array overflow
The case statements in the CG3 read and write register routines have a maximum
value of CG3_REG_SIZE, so if a value were written to this offset then it
would overflow the register array.
Currently this cannot be exploited since the MemoryRegion restricts accesses
to the range 0 ... CG3_REG_SIZE - 1, but it seems worth clarifying this for
future review and/or static analysis.
Peter Maydell [Thu, 5 Jun 2014 18:16:28 +0000 (19:16 +0100)]
Merge remote-tracking branch 'remotes/kvm/uq/master' into staging
* remotes/kvm/uq/master:
kvm: Fix eax for cpuid leaf 0x40000000
kvmclock: Ensure proper env->tsc value for kvmclock_current_nsec calculation
kvm: Enable -cpu option to hide KVM
kvm: Ensure negative return value on kvm_init() error handling path
target-i386: set CC_OP to CC_OP_EFLAGS in cpu_load_eflags
target-i386: get CPL from SS.DPL
target-i386: rework CPL checks during task switch, preparing for next patch
target-i386: fix segment flags for SMM and VM86 mode
target-i386: Fix vm86 mode regression introduced in fd460606fd6f.
kvm_stat: allow choosing between tracepoints and old stats
kvmclock: Ensure time in migration never goes backward
Peter Maydell [Thu, 5 Jun 2014 17:58:53 +0000 (18:58 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-input-10' into staging
updates for docs/multiseat.txt
input: add support for kbd delays
# gpg: Signature made Wed 04 Jun 2014 08:22:39 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <[email protected]>"
# gpg: aka "Gerd Hoffmann <[email protected]>"
# gpg: aka "Gerd Hoffmann (private) <[email protected]>"
* remotes/kraxel/tags/pull-input-10:
docs/multiseat.txt: add note about spice
docs/multiseat.txt: gtk joined the party
docs/multiseat.txt: use autoseat
input/vnc: use kbd delays in press_key
input/curses: add kbd delay between keydown and keyup events
input: use kbd delays for send_key monitor command
input: add support for kbd delays
Don Slutz [Mon, 5 May 2014 18:03:06 +0000 (14:03 -0400)]
qdev: Display warning about unused -global
This can help a user understand why -global was ignored.
For example: with "-vga cirrus"; "-global vga.vgamem_mb=16" is just
ignored when "-global cirrus-vga.vgamem_mb=16" is not.
This is currently clear when the wrong property is provided:
out/x86_64-softmmu/qemu-system-x86_64 -global cirrus-vga.vram_size_mb=16 -monitor pty -vga cirrus
char device redirected to /dev/pts/20 (label compat_monitor0)
qemu-system-x86_64: Property '.vram_size_mb' not found
Aborted (core dumped)
vs
out/x86_64-softmmu/qemu-system-x86_64 -global vga.vram_size_mb=16 -monitor pty -vga cirrus
char device redirected to /dev/pts/20 (label compat_monitor0)
VNC server running on `::1:5900'
^Cqemu: terminating on signal 2
Paolo Bonzini [Fri, 28 Mar 2014 10:43:45 +0000 (11:43 +0100)]
target-i386: fix kernel accesses with SMAP and CPL = 3
With SMAP, implicit kernel accesses from user mode always behave as
if AC=0. To do this, kernel mode is not anymore a separate MMU mode.
Instead, KERNEL_IDX is renamed to KSMAP_IDX and the kernel mode accessors
wrap KSMAP_IDX and KNOSMAP_IDX.
Paolo Bonzini [Fri, 28 Mar 2014 18:42:10 +0000 (19:42 +0100)]
softmmu: introduce cpu_ldst.h
This will collect all load and store helpers soon. For now
it is just a replacement for softmmu_exec.h, which this patch
stops including directly, but we also include it where this will
be necessary in order to simplify the next patch.
Paolo Bonzini [Fri, 28 Mar 2014 16:55:24 +0000 (17:55 +0100)]
softmmu: commonize helper definitions
They do not need to be in op_helper.c. Because cputlb.c now includes
softmmu_template.h twice for each size, io_readX must be elided the
second time through.
Paolo Bonzini [Fri, 28 Mar 2014 17:14:58 +0000 (18:14 +0100)]
softmmu: make do_unaligned_access a method of CPU
We will reference it from more files in the next patch. To avoid
ruining the small steps we're making towards multi-target, make
it a method of CPU rather than just a global.
Paolo Bonzini [Fri, 28 Mar 2014 10:15:30 +0000 (11:15 +0100)]
softmmu: start introducing SOFTMMU_CODE_ACCESS in softmmu_header.h
This preprocessor symbol is already used in softmmu_template.h. We
will use it to distinguish the two "fake" ACCESS_TYPEs
NB_MMU_MODES and NB_MMU_MODES + 1.
Paolo Bonzini [Fri, 28 Mar 2014 17:43:14 +0000 (18:43 +0100)]
hw: use ld_p/st_p instead of ld_raw/st_raw
The ld_raw and st_raw definitions are only needed in code that
must compile for both user-mode and softmmu emulation. Device
models can use the equivalent ld_p/st_p which are simple
pointer accessors.
Stefan Weil [Mon, 28 Apr 2014 17:20:00 +0000 (19:20 +0200)]
cputlb: Fix regression with TCG interpreter (bug 1310324)
Commit 0f842f8a246f2b5b51a11c13f933bf7a90ae8e96 replaced GETPC_EXT() which
was derived from GETPC() by GETRA_EXT() without fixing cputlb.c. A later
patch replaced GETRA_EXT() by GETRA() in exec/softmmu_template.h which
is included in cputlb.c.
The TCG interpreter failed because the values returned by GETRA() were no
longer explicitly set to 0. The redefinition of GETRA() introduced here
fixes this.
In addition, GETPC_ADJ which is also used in exec/softmmu_template.h is
set to 0. Both changes reduce the compiled code size for cputlb.c by more
than 100 bytes, so the normal TCG without interpreter also profits from
the reduced code size and slightly faster code.
Alexander Graf [Wed, 4 Jun 2014 21:09:11 +0000 (23:09 +0200)]
TCG: Fix tcg_gen_extr_i64_tl for 32bit
We expose a generic helper "tcg_gen_extr_i64_tl" for 64bit targets, but the
same function for 32bit targets is a misnomer and refers to an invalid function
name.
Fix up the definition to point to the correct internal helper names instead.
Alex Williamson [Mon, 2 Jun 2014 17:28:50 +0000 (11:28 -0600)]
kvm: Enable -cpu option to hide KVM
The latest Nvidia driver (337.88) specifically checks for KVM as the
hypervisor and reports Code 43 for the driver in a Windows guest when
found. Removing or changing the KVM signature is sufficient for the
driver to load and work. This patch adds an option to easily allow
the KVM hypervisor signature to be hidden using '-cpu kvm=off'. We
continue to expose KVM via the cpuid value by default. The state of
this option does not supercede or replace -enable-kvm or the accel=kvm
machine option. This only changes the visibility of KVM to the guest
and paravirtual features specifically tied to the KVM cpuid.
Peter Maydell [Tue, 3 Jun 2014 13:37:43 +0000 (14:37 +0100)]
Merge remote-tracking branch 'remotes/awilliam/tags/vfio-pci-for-qemu-20140602.0' into staging
VFIO patches: realtek NIC quirk + SPAPR IOMMU AddressSpace support
# gpg: Signature made Mon 02 Jun 2014 22:44:42 BST using RSA key ID 3BB08B22
# gpg: Can't check signature: public key not found
* remotes/awilliam/tags/vfio-pci-for-qemu-20140602.0:
vfio: Add guest side IOMMU support
vfio: Create VFIOAddressSpace objects as needed
vfio: Introduce VFIO address spaces
vfio: Rework to have error paths
vfio: Fix 128 bit handling
int128: Add int128_exts64()
memory: Sanity check that no listeners remain on a destroyed AddressSpace
vfio-pci: Quirk RTL8168 NIC
Peter Maydell [Mon, 2 Jun 2014 16:07:21 +0000 (17:07 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-8' into staging
qtest: improve ehci/uhci test
usb: misc fixes, mostly for usb3/xhci
# gpg: Signature made Mon 02 Jun 2014 15:40:34 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <[email protected]>"
# gpg: aka "Gerd Hoffmann <[email protected]>"
# gpg: aka "Gerd Hoffmann (private) <[email protected]>"
* remotes/kraxel/tags/pull-usb-8:
xhci: order superspeed ports first
xhci: make port reset trace point more verbose
usb: add usb_pick_speed
usb-host: add HAVE_STREAMS define
usb-host: allow attaching usb3 devices to ehci
usb: improve ehci/uhci test
usb: move ehci register defines to header file
usb: add uhci port status reserved bit
usb: move uhci register defines to header file
qtest: fix qpci_config_writel
Peter Maydell [Mon, 2 Jun 2014 15:10:12 +0000 (16:10 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-sdl-3' into staging
sdl2: add support for text consoles
# gpg: Signature made Mon 02 Jun 2014 15:35:20 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <[email protected]>"
# gpg: aka "Gerd Hoffmann <[email protected]>"
# gpg: aka "Gerd Hoffmann (private) <[email protected]>"
* remotes/kraxel/tags/pull-sdl-3:
sdl2: textinput + terminal
sdl2: make Ctrl-Alt-<nr> hotkeys show and hide windows
console: add kbd_put_string_console
console: add kbd_put_qcode_console
Peter Maydell [Mon, 2 Jun 2014 14:47:40 +0000 (15:47 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-vnc-3' into staging
misc minor vnc patches
# gpg: Signature made Mon 02 Jun 2014 15:31:53 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <[email protected]>"
# gpg: aka "Gerd Hoffmann <[email protected]>"
# gpg: aka "Gerd Hoffmann (private) <[email protected]>"
* remotes/kraxel/tags/pull-vnc-3:
vnc-enc-tight: Fix divide-by-zero in tight_detect_smooth_image{16,24,32}
vnc: add trace events for key events
vnc: refuse to set a password with VNC_AUTH_NONE
Gerd Hoffmann [Wed, 11 Dec 2013 12:15:37 +0000 (13:15 +0100)]
vnc: refuse to set a password with VNC_AUTH_NONE
Current code silently changes the authentication settings
in case you try to set a password without password authentication
turned on. This is bad. Return an error instead.
If we want allow changing auth settings at runtime this should
be done explicitly using a separate monitor command, not as
side effect of set_passwd.
Gerd Hoffmann [Fri, 23 May 2014 14:20:54 +0000 (16:20 +0200)]
usb: add usb_pick_speed
We can pick the usb port speed in generic code, by looking at the port
and device speed masks and looking for the fastest match. So add a
function to do exactly that, and drop the speed setting code from
usb_desc_attach as it isn't needed any more.
This way we can set the device speed before calling port->ops->attach,
which fixes some xhci hotplug issues.
Gerd Hoffmann [Fri, 23 May 2014 08:27:00 +0000 (10:27 +0200)]
usb-host: allow attaching usb3 devices to ehci
Extend compatibility test function to also figure whenever usb3
devices can be supported on ehci. Tweak ep0 maxpacketsize field
due to usb2 <-> usb3 difference.
Gerd Hoffmann [Wed, 7 May 2014 14:39:11 +0000 (16:39 +0200)]
usb: improve ehci/uhci test
* Attach usb devices to the bus.
* Check initial port status register state.
* Flip ehci initialization bit.
* Check port status register state again to
see whenever device handover to ehci worked.
Peter Maydell [Mon, 2 Jun 2014 14:27:18 +0000 (15:27 +0100)]
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches
# gpg: Signature made Mon 02 Jun 2014 14:56:00 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <[email protected]>"
* remotes/kevin/tags/for-upstream:
qemu-img: Report error even with --oformat=json
vmdk: Fix local_err in vmdk_create
block/raw-posix.c: Avoid nonstandard LONG_LONG_MAX
qemu-img: Plug memory leak in convert command
block/sheepdog: Plug memory leak in sd_snapshot_create()
block/vvfat: Plug memory leak in read_directory()
block/vvfat: Plug memory leak in check_directory_consistency()
block/qapi: Plug memory leak in dump_qobject() case QTYPE_QERROR
blockdev: Plug memory leak in drive_init()
blockdev: Plug memory leak in blockdev_init()
qemu-io: Don't print NULL when open without non-option arg fails
qemu-io: Plug memory leak in open command
qemu-io: Support multiple -o in open command
block: Plug memory leak on brv_open_image() error path
qcow2: Plug memory leak on qcow2_invalidate_cache() error paths
block/vvfat: Plug memory leak in enable_write_target()
qemu-img: Plug memory leak on block option help error path
That commit converted various fprintf(stderr, ...) calls to
use error_report(); however none of these bsd-user files include
a header which gives a prototype for error_report, so this
causes compiler warnings. Since these are just straightforward
reporting of command line errors, we should handle these in the
obvious way by printing to stderr, as we do for linux-user.
There's no need to drag in the error-handling framework for this,
especially since user-mode doesn't have the "maybe we need to
send this to the monitor" issues system emulation does.
Max Reitz [Sat, 31 May 2014 19:33:30 +0000 (21:33 +0200)]
qemu-img: Report error even with --oformat=json
img_check() should report that the format of the given image does not
support checks even if JSON output is desired. JSON data is output to
stdout, as opposed to error messages, which are (in the case of
qemu-img) printed to stderr. Therefore, it is easy to distinguish
between the two.
Also, img_info() does already use error_report() for human-readable
messages even though JSON output is desired (through
collect_image_info_list()).
David Gibson [Fri, 30 May 2014 19:10:07 +0000 (13:10 -0600)]
vfio: Add guest side IOMMU support
This patch uses the new IOMMU notifiers to allow VFIO pass through devices
to work with guest side IOMMUs, as long as the host-side VFIO iommu has
sufficient capability and granularity to match the guest side. This works
by tracking all map and unmap operations on the guest IOMMU using the
notifiers, and mirroring them into VFIO.
There are a number of FIXMEs, and the scheme involves rather more notifier
structures than I'd like, but it should make for a reasonable proof of
concept.
David Gibson [Fri, 30 May 2014 19:09:14 +0000 (13:09 -0600)]
vfio: Create VFIOAddressSpace objects as needed
So far, VFIO has a notion of different logical DMA address spaces, but
only ever uses one (system memory). This patch extends this, creating
new VFIOAddressSpace objects as necessary, according to the AddressSpace
reported by the PCI subsystem for this device's DMAs.
This isn't enough yet to support guest side IOMMUs with VFIO, but it does
mean we could now support VFIO devices on, for example, a guest side PCI
host bridge which maps system memory at somewhere other than 0 in PCI
space.
David Gibson [Fri, 30 May 2014 19:05:19 +0000 (13:05 -0600)]
vfio: Introduce VFIO address spaces
The only model so far supported for VFIO passthrough devices is the model
usually used on x86, where all of the guest's RAM is mapped into the
(host) IOMMU and there is no IOMMU visible in the guest.
This patch begins to relax this model, introducing the notion of a
VFIOAddressSpace. This represents a logical DMA address space which will
be visible to one or more VFIO devices by appropriate mapping in the (host)
IOMMU. Thus the currently global list of containers becomes local to
a VFIOAddressSpace, and we verify that we don't attempt to add a VFIO
group to multiple address spaces.
For now, only one VFIOAddressSpace is created and used, corresponding to
main system memory, that will change in future patches.
projects / qemu.git / log