Anthony Liguori [Tue, 26 Feb 2013 13:44:39 +0000 (07:44 -0600)]
Merge remote-tracking branch 'kwolf/for-anthony' into staging
# By Paolo Bonzini (7) and others
# Via Kevin Wolf
* kwolf/for-anthony: (22 commits)
pc: add compatibility machine types for 1.4
blockdev: enable discard by default
qemu-nbd: add --discard option
blockdev: add discard suboption to -drive
block: implement BDRV_O_UNMAP
block: complete all IOs before .bdrv_truncate
coroutine: trim down nesting level in perf_nesting test
coroutine: move pooling to common code
qemu-iotests: Test qcow2 image creation options
qemu-iotests: Add qemu-img compare test
qemu-img: Add compare subcommand
qemu-img: Add "Quiet mode" option
block: Add synchronous wrapper for bdrv_co_is_allocated_above
block: refuse negative iops and bps values
block: use Error in do_check_io_limits()
qcow2: support compressed clusters in BlockFragInfo
qemu-img: add compressed clusters to BlockFragInfo
qemu-img: fix missing space in qemu-img check output
qcow2: record fragmentation statistics during check
qcow2: introduce check_refcounts_l1/l2() flags
...
Anthony Liguori [Tue, 26 Feb 2013 13:44:32 +0000 (07:44 -0600)]
Merge remote-tracking branch 'quintela/stats.next' into staging
# By Juan Quintela
# Via Juan Quintela
* quintela/stats.next:
migration: calculate expected_downtime
migration: don't account sleep time for calculating bandwidth
migration: calculate end time after we have sent the data
migration: change initial value of expected_downtime
Petar Jovanovic [Thu, 7 Feb 2013 18:36:09 +0000 (19:36 +0100)]
target-mips: fix for sign-issue in MULQ_W helper
Correct sign-propagation before multiplication in MULQ_W helper.
The change also fixes previously incorrect expected values in the
tests for MULQ_RS.W and MULQ_S.W.
Peter Maydell [Wed, 20 Feb 2013 15:21:09 +0000 (15:21 +0000)]
Replace all setjmp()/longjmp() with sigsetjmp()/siglongjmp()
The setjmp() function doesn't specify whether signal masks are saved and
restored; on Linux they are not, but on BSD (including MacOSX) they are.
We want to have consistent behaviour across platforms, so we should
always use "don't save/restore signal mask" (this is also generally
going to be faster). This also works around a bug in MacOSX where the
signal-restoration on longjmp() affects the signal mask for a completely
different thread, not just the mask for the thread which did the longjmp.
The most visible effect of this was that ctrl-C was ignored on MacOSX
because the CPU thread did a longjmp which resulted in its signal mask
being applied to every thread, so that all threads had SIGINT and SIGTERM
blocked.
The POSIX-sanctioned portable way to do a jump without affecting signal
masks is to siglongjmp() to a sigjmp_buf which was created by calling
sigsetjmp() with a zero savemask parameter, so change all uses of
setjmp()/longjmp() accordingly. [Technically POSIX allows sigsetjmp(buf, 0)
to save the signal mask; however the following siglongjmp() must not
restore the signal mask, so the pair can be effectively considered as
"sigjmp/longjmp which don't touch the mask".]
For Windows we provide a trivial sigsetjmp/siglongjmp in terms of
setjmp/longjmp -- this is OK because no user will ever pass a non-zero
savemask.
The setjmp() uses in tests/tcg/test-i386.c and tests/tcg/linux-test.c
are left untouched because these are self-contained singlethreaded
test programs intended to be run under QEMU's Linux emulation, so they
have neither the portability nor the multithreading issues to deal with.
Ronald Hecht [Tue, 19 Feb 2013 11:45:06 +0000 (12:45 +0100)]
Added LEON MMU ASI mappings and corrected LEON3 MMU masks.
This patch adds SPARC ASI mappings that are used by the LEON processor.It also
corrects the MMU context register and context table pointer mask of the LEON3.
Peter Maydell [Sat, 2 Feb 2013 17:17:54 +0000 (17:17 +0000)]
disas/i386.c: Add explicit braces round empty for-loop body
Add explicit braces round an empty for-loop body; this fits
QEMU style and is easier to read than an inconspicuous semicolon
at the end of the line. It also silences a clang warning:
disas/i386.c:4723:49: warning: for loop has empty body [-Wempty-body]
for (i = 0; tmp[i] == '0' && tmp[i + 1]; i++);
^
disas/i386.c:4723:49: note: put the semicolon on a separate line to silence this warning [-Wempty-body]
Peter Maydell [Tue, 12 Feb 2013 16:13:27 +0000 (16:13 +0000)]
qemu-log: Remove qemu_log_try_set_file() and its users
Remove the function qemu_log_try_set_file() and its users (which
are all in TCG code generation functions for various targets).
This function was added to abstract out code which was originally
written as "if (!logfile) logfile = stderr;" in order that BUG:
case code which did an unguarded "fprintf(logfile, ...)" would
not crash if debug logging was not enabled. Since those direct
uses of logfile have also been abstracted away into qemu_log()
calls which check for a NULL logfile, there is no need for the
target-* files to mess with the user's chosen logging settings.
Hervé Poussineau [Thu, 21 Feb 2013 21:58:08 +0000 (22:58 +0100)]
xhci: fix bad print specifier
This fixes the following compilation error:
hw/usb/hcd-xhci.c:1156:17: error: format ‘%llx’ expects argument of type
‘long long unsigned int’, but argument 4 has type ‘unsigned int’
Stefan Weil [Fri, 22 Feb 2013 19:33:34 +0000 (20:33 +0100)]
ui/gtk: Use menu item from stock for full screen
This reduces the required translations and gives a nicer menu
with an icon.
The full screen menu item is no longer a check menu item.
A checked item is not visible in full screen mode,
so it is not needed for this special menu item.
Kevin Wolf [Fri, 22 Feb 2013 20:08:51 +0000 (21:08 +0100)]
Reenable -Wstrict-prototypes
One part of this patch reverts commit 22bc9a46, which disabled the
warning. The rest of it deals with the warning by adding a #pragma for
newer gcc and by disabling -Werror for compilers that can't deal with
the #pragma.
Paolo Bonzini [Fri, 8 Feb 2013 13:06:14 +0000 (14:06 +0100)]
blockdev: enable discard by default
Because discard is now a host parameter, we can always fake it as enabled
in the guest. This is an extension of the current choice to ignore
"not supported" errors from the host when discard_granularity is set
to nonzero.
The default granularity is set to the logical block size or 4k, whichever
is largest, because cluster sizes below 4k are rarely used and 4K is a
typical block size for files.
Paolo Bonzini [Fri, 8 Feb 2013 13:06:11 +0000 (14:06 +0100)]
block: implement BDRV_O_UNMAP
It is better to present homogeneous hardware independent of the storage
technology that is chosen on the host, hence we make discard a host
parameter; the user can choose whether to pass it down to the image
format and protocol, or to ignore it.
Using DISCARD with filesystems can cause very severe fragmentation, so it
is left default-off for now. This can change later when we implement the
"anchor" operation for efficient management of preallocated files.
There is still one choice to make: whether DISCARD has an effect on the
dirty bitmap or not. I chose yes, though there is a disadvantage: if
the guest is buggy and issues discards for data that is in use, there
will be no way to migrate storage for that guest without downgrading
the machine type to an older one.
Paolo Bonzini [Tue, 19 Feb 2013 10:59:10 +0000 (11:59 +0100)]
coroutine: trim down nesting level in perf_nesting test
20000 nested coroutines require 20 GB of virtual address space.
Only nest 1000 of them so that the test (only enabled with
"-m perf" on the command line) runs on 32-bit machines too.
Paolo Bonzini [Tue, 19 Feb 2013 10:59:09 +0000 (11:59 +0100)]
coroutine: move pooling to common code
The coroutine pool code is duplicated between the ucontext and
sigaltstack backends, and absent from the win32 backend. But the
code can be shared easily by moving it to qemu-coroutine.c.
block: Add synchronous wrapper for bdrv_co_is_allocated_above
There's no synchronous wrapper for bdrv_co_is_allocated_above function
so it's not possible to check for sector allocation in an image with
a backing file.
Stefan Hajnoczi [Wed, 13 Feb 2013 15:53:42 +0000 (16:53 +0100)]
block: use Error in do_check_io_limits()
The do_check_io_limits() function returns false when I/O limits are
invalid but it doesn't set an Error to indicate why. The two
do_check_io_limits() callers duplicate error reporting. Solve this by
passing an Error pointer into do_check_io_limits().
Note that the two callers report slightly different errors: drive_init()
prints a custom error message while qmp_block_set_io_throttle() does
error_set(errp, QERR_INVALID_PARAMETER_COMBINATION).
QERR_INVALID_PARAMETER_COMBINATION is a generic error, see
include/qapi/qmp/qerror.h:
Stefan Hajnoczi [Thu, 7 Feb 2013 16:15:03 +0000 (17:15 +0100)]
qemu-img: fix missing space in qemu-img check output
The qemu-img check fragmentation printf() is missing a space before the
'=' sign. The human output is not guaranteed to be stable and we are
not aware of screen scrapers, so add the missing space.
Also fix the missing indentation of the printf() arguments.
Stefan Hajnoczi [Thu, 7 Feb 2013 16:15:02 +0000 (17:15 +0100)]
qcow2: record fragmentation statistics during check
The qemu-img check command can display fragmentation statistics:
* Total number of clusters in virtual disk
* Number of allocated clusters
* Number of fragmented clusters
This patch adds fragmentation statistics support to qcow2.
Compressed and normal clusters count as allocated. Zero clusters are
not counted as allocated unless their L2 entry has a non-zero offset
(e.g. preallocation).
Only the current L1 table counts towards the statistics - snapshots are
ignored.
Stefan Hajnoczi [Thu, 7 Feb 2013 16:15:01 +0000 (17:15 +0100)]
qcow2: introduce check_refcounts_l1/l2() flags
The check_refcounts_l1/l2() functions have a check_copied argument to
check that the QCOW_O_COPIED flag is consistent with refcount == 1.
This should be a bool, not an int.
However, the next patch introduces qcow2 fragmentation statistics and
also needs to pass an option to check_refcounts_l1/l2(). This is a good
opportunity to use an int flags field.
This patch adds the support for reporting the image end offset (in
bytes). This is particularly useful after a conversion (or a rebase)
where the destination is a block device in order to find the first
unused byte at the end of the image.
Anthony Liguori [Fri, 22 Feb 2013 14:40:30 +0000 (08:40 -0600)]
ui/gtk: require at least GTK 2.18 and VTE 0.26
This gives us the bare amount of features we need. We can add work arounds
for older versions and lower the requirement but this should be a good
starting point.
Suggested-by: Daniel Berrange <[email protected]> Signed-off-by: Anthony Liguori <[email protected]>
---
v1 -> v2
- tremendous simplification suggested by danpb
Now we add it back. We need to create dirty_bytes_rate because we
can't include cpu-all.h from migration.c, and there is no other way to
include TARGET_PAGE_SIZE.
Anthony Liguori [Wed, 20 Feb 2013 13:43:26 +0000 (07:43 -0600)]
gtk: suppress accelerators from the File menu when grab is active
If you're full screen, you probably expect Ctrl-Q to go to the guest,
not the host. I think restricting certain menus is the right way to
handle this generally speaking.
Anthony Liguori [Wed, 20 Feb 2013 13:43:23 +0000 (07:43 -0600)]
gtk: add support for screen scaling and full screen (v5)
Basic menu items to enter full screen mode and zoom in/out. Unlike SDL, we
don't allow arbitrary scaling based on window resizing. The current behavior
with SDL causes a lot of problems for me.
Sometimes I accidentally resize the window a tiny bit while trying to move it
(Ubuntu's 1-pixel window decorations don't help here). After that, scaling is
now active and if the screen changes size again, badness ensues since the
aspect ratio is skewed.
Allowing zooming by 25% in and out should cover most use cases. We can add a
more flexible scaling later but for now, I think this is a more friendly
behavior.
Anthony Liguori [Wed, 20 Feb 2013 13:43:22 +0000 (07:43 -0600)]
gtk: add support for input grabbing (v2)
There is a small deviation from SDL's behavior here. Instead of Ctrl+Alt
triggering grab, we now use Ctrl-Alt-g to trigger grab.
GTK will not accept Ctrl+Alt as an accelerator since it just consists of
modifiers. Having grab as a proper accelerator is important as it allows a user
to override the accelerator for accessibility purposes.
We also are not automatically grabbing on left-click. Besides the inability to
tie mouse clicks to an accelerator, I think this behavior is hard to discover
and since it only happens depending on the guest state, it can lead to confusing
behavior.
This can be changed in the future if there's a strong resistence to dropping
left-click-to-grab, but I think we're better off dropping it.
Anthony Liguori [Wed, 20 Feb 2013 13:43:21 +0000 (07:43 -0600)]
gtk: add virtual console support (v2)
This enables VteTerminal to be used to render the text consoles. VteTerminal is
the same widget used by gnome-terminal which means it's VT100 emulation is as
good as they come.
It's also screen reader accessible, supports copy/paste, proper scrolling and
most of the other features you would expect from a terminal widget.
Anthony Liguori [Wed, 20 Feb 2013 13:43:20 +0000 (07:43 -0600)]
ui: add basic GTK gui (v5)
This is minimalistic and just contains the basic widget infrastructure. The GUI
consists of a menu and a GtkNotebook. To start with, the notebook has its tabs
hidden which provides a UI that looks very similar to SDL with the exception of
the menu bar.
The menu bar allows a user to toggle the visibility of the tabs. Cairo is used
for rendering.
I used gtk-vnc as a reference. gtk-vnc solves the same basic problems as QEMU
since it was originally written as a remote display for QEMU. So for the most
part, the approach to rendering and keyboard handling should be pretty solid for
GTK.
Anthony Liguori [Wed, 20 Feb 2013 13:43:18 +0000 (07:43 -0600)]
build: disable Wstrict-prototypes
GTK won't build with strict-prototypes due to gtkitemfactory.h:
/* We use () here to mean unspecified arguments. This is deprecated
* as of C99, but we can't change it without breaking compatibility.
* (Note that if we are included from a C++ program () will mean
* (void) so an explicit cast will be needed.)
*/
typedef void (*GtkItemFactoryCallback) ();
num_interfaces only tells you how many interfaces the concrete child class has
(as defined in the TypeInfo). This means if you have a child class which defines
no interfaces of its own, but its parent has interfaces you cannot cast to those
parent interfaces.
Fixed changing the guard to check the class->interfaces list instead (which is
a complete flattened list of implemented interfaces).
The QOM framework will attempt the recreate a classes interface list from
scratch for each class. This means that a child class should zero out the
list of interfaces when cloned from the parent class.
Currently the list is memcpy()d from the parent to the child. As the interface
list is just a pointer to a list, this means the parent and child will share
the same list of interfaces. When the child inits, it will append its own
interfaces to the parents list. This is incorrect as the parent should not pick
up its childs interfaces.
This actually causes an infinite loop at class init time, as the child will
iterate through the parent interface list adding each itf to its own list(in
type_initialize()). As the list is (erroneously) shared, the new interface
instances for the child are appended to the parent, and the iterator never hits
the tail and loops forever.
Gerd Hoffmann [Wed, 20 Feb 2013 08:37:12 +0000 (09:37 +0100)]
vga: fix byteswapping.
In case host and guest endianness differ the vga code first creates
a shared surface (using qemu_create_displaysurface_from), then goes
patch the surface format to indicate that the bytes must be swapped.
The switch to pixman broke that hack as the format patching isn't
propagated into the pixman image, so ui code using the pixman image
directly (such as vnc) uses the wrong format.
Fix that by adding a byteswap parameter to
qemu_create_displaysurface_from, so we'll use the correct format
when creating the surface (and the pixman image) and don't have
to patch the format afterwards.
Peter Maydell [Wed, 20 Feb 2013 16:24:22 +0000 (16:24 +0000)]
Remove elderly top level TODO file
The top level TODO file hasn't been touched since 2008, so it's now
an unhelpful and out of date mix of things that have already been done,
things that don't make sense any more and things which could in theory
be done but are not in practice important enough (or we'd have done
them some time in the last five years). Remove it. The bug tracking
system is probably a better place to track TODO items if we want to
do so.
projects / qemu.git / log