Peter Maydell [Thu, 29 Sep 2011 14:48:12 +0000 (15:48 +0100)]
linux-user: Fix broken "-version" option
Fix the "-version" option, which was accidentally broken in commit fc9c541:
* exit after printing version information rather than proceeding
blithely onward (and likely printing the full usage message)
* correct the cut-n-paste error in the usage message for it
* don't insist on the presence of a following argument for
options which don't take an argument (this was preventing
'qemu-arm -version' from working)
* remove a spurious argc check from the beginning of main() which
meant 'QEMU_VERSION=1 qemu-arm' didn't work.
Peter Maydell [Tue, 18 Oct 2011 15:12:54 +0000 (16:12 +0100)]
hw/omap2: Wire up the IRQ for the 2430's fifth GPIO module
The OMAP2430 version of the omap-gpio device has five GPIO modules,
not four like the other OMAP2 versions; wire up the fifth module's
IRQ line correctly.
In file included from trace.c:2:0:
trace.h: In function ‘trace_v9fs_attach’:
trace.h:2850:9: error: too many arguments for format [-Werror=format-extra-args]
trace.h: In function ‘trace_v9fs_wstat’:
trace.h:3039:9: error: too many arguments for format [-Werror=format-extra-args]
trace.h: In function ‘trace_v9fs_mkdir’:
trace.h:3088:9: error: too many arguments for format [-Werror=format-extra-args]
trace.h: In function ‘trace_v9fs_mkdir_return’:
trace.h:3095:9: error: too many arguments for format [-Werror=format-extra-args]
Fix the format strings and also use %u instead of %d for unsigned values
in the changed strings. There are more minor errors of this kind
which I did not fix because that would make the review more difficult.
Juan Quintela [Wed, 23 Feb 2011 18:56:52 +0000 (19:56 +0100)]
migration: propagate error correctly
unix and tcp outgoing migration have error values, but didn't returned
it. Make them return the error. Notice that EINPROGRESS & EWOULDBLOCK
are not considered errors as call will be retry later.
Juan Quintela [Tue, 11 May 2010 21:18:34 +0000 (23:18 +0200)]
migration: Our release callback was just free
We called it from a single place, and always with state !=
MIG_STATE_ACTIVE. Just remove the whole callback. For users of the
notifier, notice that this is exactly the case where they don't care,
we are just freeing the state from previous failed migration (it can't
be a sucessful one, otherwise we would not be running on that machine
in the first place).
Juan Quintela [Tue, 22 Feb 2011 22:32:54 +0000 (23:32 +0100)]
migration: Introduce migrate_fd_completed() for consistency
This function is a bit different of the others that change the state,
in the sense that if migrate_fd_cleanup() returns an error, it set the
status to error, not completed.
Juan Quintela [Wed, 21 Sep 2011 20:32:08 +0000 (22:32 +0200)]
buffered_file: reuse QEMUFile has_error field
Instead of having two has_error fields in QEMUFile & QEMUBufferedFile,
reuse the 1st one. Notice that the one in buffered_file is only set
after a file operation.
Juan Quintela [Wed, 21 Sep 2011 16:12:58 +0000 (18:12 +0200)]
buffered_file: Use right "opaque"
buffered_close 's' variable is of type QEMUFileBuffered, and
wait_for_unfreeze() expect to receive a MigrationState, that
'coincidentaly' is s->opaque.
Yoshiaki Tamura [Tue, 22 Feb 2011 15:01:24 +0000 (00:01 +0900)]
migration: add error handling to migrate_fd_put_notify().
Although migrate_fd_put_buffer() sets MIG_STATE_ERROR if it failed,
since migrate_fd_put_notify() isn't checking error of underlying
QEMUFile, those resources are kept open. This patch checks it and
calls migrate_fd_error() in case of error.
Juan Quintela [Tue, 4 Oct 2011 13:28:31 +0000 (15:28 +0200)]
savevm: improve subsections detection on load
We add qemu_peek_buffer, that is identical to qemu_get_buffer, just
that it don't update f->buf_index.
We add a paramenter to qemu_peek_byte() to be able to peek more than
one byte.
Once this is done, to see if we have a subsection we look:
- 1st byte is QEMU_VM_SUBSECTION
- 2nd byte is a length, and is bigger than section name
- 3rd element is a string that starts with section_name
So, we shouldn't have false positives (yes, content could still get us
wrong but probabilities are really low).
v2:
- Alex Williamsom found that we could get negative values on index.
- Rework code to fix that part.
- Rewrite qemu_get_buffer() using qemu_peek_buffer()
Luiz Capitulino [Fri, 14 Oct 2011 14:18:09 +0000 (11:18 -0300)]
runstate: Allow user to migrate twice
It should be a matter of allowing the transition POSTMIGRATE ->
FINISH_MIGRATE, but it turns out that the VM won't do the
transition the second time because it's already stopped.
So this commit also adds vm_stop_force_state() which performs
the transition even if the VM is already stopped.
Luiz Capitulino [Thu, 13 Oct 2011 14:36:40 +0000 (11:36 -0300)]
savevm: qemu_savevm_state(): Drop stop VM logic
qemu_savevm_state() has some logic to stop the VM and to (or not to)
resume it. But this seems to be a big noop, as qemu_savevm_state()
is only called by do_savevm() when the VM is already stopped.
So, let's drop qemu_savevm_state()'s stop VM logic.
Luiz Capitulino [Thu, 13 Oct 2011 17:39:59 +0000 (14:39 -0300)]
runstate: Allow to transition from paused to postmigrate
The user may already have paused the VM before starting the
migration process. If s/he does that, then the state will be
'paused' when we finish the migration process. In that case
we want to transition from 'paused' to 'postmigrate' as the
latter is now the real reason why the VM is stopped.
Jan Kiszka [Fri, 7 Oct 2011 07:19:53 +0000 (09:19 +0200)]
i8259: Convert to qdev
This key cleanup step requires to move the IRQ debugging bit from
i8259_set_irq directly to the per-PIC pic_set_irq, to pass the PIC
parameters (I/O base, ELCR address and mask, master/slave mode) as
qdev properties, and to interconnect the PICs with their environment via
GPIO pins.
Jan Kiszka [Fri, 7 Oct 2011 07:19:51 +0000 (09:19 +0200)]
i8259: Eliminate PicState2
Introduce a reference to the slave PIC for the few cases we need to
access it without a proper pointer at hand and drop PicState2. We could
even live without slave_pic if we had a better way of modeling the
cascade bus the PICs are attached to (in addition to the ISA bus).
Jan Kiszka [Fri, 7 Oct 2011 07:19:50 +0000 (09:19 +0200)]
i8259: Replace PicState::pics_state with master flag
This reflects how real PICs indentify their role (in non-buffered mode):
Pass the state of the /SP input on pic_init and use it instead of
pics_state to differentiate between master and slave mode.
Jan Kiszka [Fri, 7 Oct 2011 07:19:49 +0000 (09:19 +0200)]
i8259: PREP: Replace pic_intack_read with pic_read_irq
There is nothing in the i8259 spec that justifies the special
pic_intack_read. At least the Linux PREP kernels configure the PICs
properly so that pic_read_irq returns identical values, and setting
read_reg_select in PIC0 cannot be derived from any special i8259 mode.
So switch ppc_prep to pic_read_irq and drop the now unused PIC code.
Jan Kiszka [Fri, 7 Oct 2011 07:19:47 +0000 (09:19 +0200)]
i8259: Fix poll command
This was probably never used so far: According to the spec, polling
means ack'ing the pending IRQ and setting its corresponding bit in isr.
Moreover, we have to signal a pending IRQ via bit 7 of the returned
value, and we must not return a spurious IRQ if none is pending.
This implements the poll command without the help of pic_poll_read which
is left untouched as pic_intack_read is still using it.
Jan Kiszka [Fri, 7 Oct 2011 07:19:46 +0000 (09:19 +0200)]
i8259: Switch to per-PIC IRQ update
This converts pic_update_irq to work against a single PIC instead of the
complete cascade. Along this change, the required update after
pic_set_irq1 is now moved into that function.
Jan Kiszka [Fri, 7 Oct 2011 07:19:45 +0000 (09:19 +0200)]
i8259: Clear ELCR on reset
The ELCR is actually part of the chipset but we model it here for
simplicity reasons. The PIIX3 clears the ELCR on reset, which was once
broken by 4dbe19e181. Fix this by splitting up pic_init_reset from
pic_reset and clearing the register in the latter.
Jan Kiszka [Fri, 7 Oct 2011 07:19:44 +0000 (09:19 +0200)]
i8259: Update IRQ state after reset
MIPS and PPC users of the i8259 output signal expect us to report state
updates also after reset. As no consumer (including the master PIC) can
misinterpret the deassert as an activation event, it is safe to simply
update the IRQ state after reset.
Jan Kiszka [Fri, 7 Oct 2011 07:19:43 +0000 (09:19 +0200)]
i8259: Reorder intack in pic_read_irq
As we want to move the IRQ update to pic_intack, ordering matters: the
slave ack must be executed before the master ack to avoid missing
further pending slave IRQs.
Jan Kiszka [Fri, 7 Oct 2011 07:19:41 +0000 (09:19 +0200)]
i8239: Introduce per-PIC output interrupt
As a first step towards more generic master-slave support, remove
parent_irq in favor of a per-PIC output interrupt line. The slave's
line is attached to IRQ2 of the master, but it remains unused for now.
Jan Kiszka [Fri, 7 Oct 2011 07:19:37 +0000 (09:19 +0200)]
pc: Fix and clean up PIC-to-APIC IRQ path
The master PIC is connected to the LINTIN0 of the APICs. As the APIC
currently does not track the state of that line, we have to ask the PIC
to reinject its IRQ after the CPU picked up an event from the APIC.
This introduces pic_get_output to read the master PIC IRQ line state
without changing it. The APIC uses this function to decide if a PIC IRQ
should be reinjected on apic_update_irq. This reflects better how the
real hardware works.
The patch fixes some failures of the kvm unit tests apic and eventinj by
allowing to enable the proper CPU IRQ deassertion when the guest masks
some pending IRQs at PIC level.
Jan Kiszka [Fri, 7 Oct 2011 07:19:35 +0000 (09:19 +0200)]
pc: Generalize ISA IRQs to GSIs
The ISA bus IRQ range is 0..15. What isa_irq_handler and IsaIrqState are
actually dealing with are the Global System Interrupts. Refactor the
code to clarify this.
Max Filippov [Sat, 15 Oct 2011 22:56:46 +0000 (02:56 +0400)]
target-xtensa: add Avnet LX60/LX110/LX200 boards
These boards carry similar hardware: SDRAM (48M for LX110, 64M for LX60,
96M for LX200), 16 Mbyte FLASH, FPGA, 10/100 Mbps Ethernet PHY and 16550
UART. FPGA may be loaded with almost any Tensilica processor. It is also
used to implement Ethernet MAC, e.g. OpenCores 10/100 Mbps Ethernet MAC
and LED/DIP switches access.
projects / qemu.git / log