Kevin Wolf [Fri, 18 Jun 2010 16:27:03 +0000 (18:27 +0200)]
qdev-properties: Fix (u)intXX parsers
scanf calls must not use PRI constants, they have probably the wrong size and
corrupt memory. We could replace them by SCN ones, but strtol is simpler than
scanf here anyway. While at it, also fix the parsers to reject garbage after
the number ("4096xyz" was accepted before).
Amit Shah [Tue, 15 Jun 2010 08:00:39 +0000 (13:30 +0530)]
net: Fix VM start with '-net none'
Commit 50e32ea8f31035877decc10f1075aa0e619e09cb changed the behaviour
for the return type of net_client_init() when a nic type with no init
method was specified. 'none' is one such nic type. Instead of returning
0, which gets interpreted as an index into the nd_table[] array, we
switched to returning -1, which signifies an error as well.
That broke VM start with '-net none'. Testing was only done with the
monitor command 'pci_add', which doesn't fail.
The correct fix would still be to return 0+ values from
net_client_init() only when the return value can be used as an index to
refer to an entry in nd_table[]. With the current code, callers can
erroneously poke into nd_table[0] when -net nic is used, which can lead
to badness.
However, this commit just returns to the previous behaviour before the
offending commit.
Jan Kiszka [Wed, 2 Jun 2010 06:49:14 +0000 (08:49 +0200)]
x86: svm: Always clear event_inj on vmexit
We currently only clear SVM_EVTINJ_VALID after successful interrupt
delivery. This apparently does not match real hardware which clears the
whole event_inj field on every vmexit, including unsuccessful interrupt
delivery.
The commit 8e65b7c04965c8355e4ce43211582b6b83054e3d introduced
expire_time of UHCIState. But expire_time is not in vmstate, the
second uhci_frame_timer will not be fired immediately after loadvm.
Jun Koi [Thu, 6 May 2010 05:36:59 +0000 (14:36 +0900)]
A bit optimization for tlb_set_page()
This patch avoids handling write watchpoints on read-only memory access.
It also breaks the searching loop for watchpoint once the setup for
handling watchpoint later is done.
Paolo Bonzini [Mon, 14 Jun 2010 17:11:54 +0000 (19:11 +0200)]
lsi53c895a: fix Phase Mismatch Jump
lsi_bad_phase has a bug in the choice of pmjad1/pmjad2. This does
not matter with Linux guests because it uses just one routine for
both, but it breaks Windows 64-bit guests. This is the text
from the spec:
"[The PMJCTL] bit controls which decision mechanism is used
when jumping on phase mismatch. When this bit is cleared the
LSI53C895A will use Phase Mismatch Jump Address 1 (PMJAD1) when
the WSR bit is cleared and Phase Mismatch Jump Address 2 (PMJAD2)
when the WSR bit is set. When this bit is set the LSI53C895A will
use jump address one (PMJAD1) on data out (data out, command,
message out) transfers and jump address two (PMJAD2) on data in
(data in, status, message in) transfers."
Which means:
CCNTL0.PMJCTL
0 SCNTL2.WSR = 0 PMJAD1
0 SCNTL2.WSR = 1 PMJAD2
1 out PMJAD1
1 in PMJAD2
In qemu, what you get instead is:
CCNTL0.PMJCTL
0 out PMJAD1
0 in PMJAD2 <<<<<
1 out PMJAD1
1 in PMJAD1 <<<<<
Considering that qemu always has SCNTL2.WSR cleared, the two marked cases
(corresponding to phase mismatch on input) are always jumping to the
wrong PMJAD register. The patch implements the correct semantics.
Andre Przywara [Wed, 2 Jun 2010 09:57:47 +0000 (11:57 +0200)]
fix CPUID vendor override
the meaning of vendor_override is actually the opposite of how it
is currently used :-(
Fix it to allow KVM to export the non-native CPUID vendor if
explicitly requested by the user.
The intended behavior is:
With TCG:
- always inject the configured vendor (either hard-coded, in config
files or via ",vendor=" commandline)
With KVM:
- by default inject the host's vendor
- if the user specifies ",vendor=" on the commandline, use this
instead of the host's vendor
- all pre-configured vendors (hard-coded, config file) are ignored
Jan Kiszka [Wed, 19 May 2010 22:28:45 +0000 (00:28 +0200)]
kvm: Switch kvm_update_guest_debug to run_on_cpu
Guest debugging under KVM is currently broken once io-threads are
enabled. Easily fixable by switching the fake on_vcpu to the real
run_on_cpu implementation.
Stefan Weil [Thu, 24 Jun 2010 20:41:33 +0000 (22:41 +0200)]
win32: Add define for missing EPROTONOSUPPORT
mingw32 does not define EPROTONOSUPPORT (which is used by
migration.c and maybe future patches), so add a
definition which uses a supported errno value.
Artyom Tarasenko [Mon, 21 Jun 2010 18:23:21 +0000 (20:23 +0200)]
mask all interrupts when MASTER_DISABLE is set
The MASTER_DISABLE bit (aka mask-all) masks all the interrupts.
According to Sun-4M System Architecture
"The level–15 interrupt sources [...] are maskable with the Interrupt Target
Mask Register. While these interrupts are considered ’non–maskable’ within
the SPARC IU, a mask capability is provided to allow the boot firmware
to establish a basic environment before receiving any level–15 interrupts,
which are non–maskable within SPARC. A mask–all bit is provided to allow
disabling of all external interrupts during change of the CIT."
Blue Swirl [Sun, 27 Jun 2010 16:04:31 +0000 (16:04 +0000)]
Remove useless device dependency of HAS_AUDIO
System architecture dictates whether HAS_AUDIO is defined. It's then
useless to check for HAS_AUDIO in files which are only used on those
architectures which always have audio.
Alex Williamson [Thu, 17 Jun 2010 15:15:02 +0000 (09:15 -0600)]
virtio-pci: fix bus master bug setting on load
The comment suggests we're checking for the driver in the ready
state and bus master disabled, but the code is checking that it's
not in the ready state.
Mapped mode stores extended attributes in the user space of the extended
attributes. Given that the user space extended attributes are available
to regular files only, special files are created as regular files on the
fileserver and appropriate mode bits are added to the extended attributes.
This method presents all special files and symlinks as regular files on the
fileserver while they are represented as special files on the guest mount.
virtio-9p: Security model for symlink and readlink
Mapped mode stores extended attributes in the user space of the extended
attributes. Given that the user space extended attributes are available
to regular files only, special files are created as regular files on the
fileserver and appropriate mode bits are added to the extended attributes.
This method presents all special files and symlinks as regular files on the
fileserver while they are represented as special files on the guest mount.
Implemntation of symlink in mapped security model:
A regular file is created and the link target is written to it.
readlink() reads it back from the file.
In the mapped security model, VirtFS server intercepts and maps
the file object create and get/set attribute requests. Files on the fileserver
will be created with VirtFS servers (QEMU) user credentials and the
client-users credentials are stored in extended attributes. On the request
to get attributes, server extracts the client-users credentials
from extended attributes and sends them to the client.
On Host/Fileserver:
-rw-------. 2 virfsuid virtfsgid 0 2010-05-11 09:19 afile
On Guest/Client:
-rw-r--r-- 2 guestuser guestuser 0 2010-05-11 12:19 afile
mapped model changes the owner in the extended attributes.
passthrough model does the change through lchown() as the
server don't need to follow the link and client will send the
actual filesystem object.
virtio-9p: Make infrastructure for the new security model.
This patch adds required infrastructure for the new security model.
- A new configure option for attr/xattr.
- if CONFIG_VIRTFS will be defined if both CONFIG_LINUX and CONFIG_ATTR defined.
- Defines routines related to both security models.
In the case of mapped security model, files are created with QEMU user
credentials and the client-user's credentials are saved in extended attributes.
Whereas in the case of passthrough security model, files on the
filesystem are directly created with client-user's credentials.
Michael Tokarev [Wed, 2 Jun 2010 17:33:01 +0000 (14:33 -0300)]
give some useful error messages when tap open
In net/tap-linux.c, when manipulation of /dev/net/tun fails, it prints
(with fprintf) something like this:
warning: could not open /dev/net/tun: no virtual network emulation
this has 2 issues:
1) it is not a warning really, it's a fatal error (kvm exits after
that),
2) there's no indication as of what's actually wrong: printing errno there
is helpful.
The patch below removes the "warning" prefix, uses %m (since it's linux,
%m is available as format modifier), and changes fprintf() to %qemu_error().
Now it prints something like this instead:
could not configure /dev/net/tun: Device or resource busy
(there are 2 messages like that in the same function)
This fixes Debian bug #578154, see
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=578154
MORITA Kazutaka [Sun, 20 Jun 2010 19:03:52 +0000 (04:03 +0900)]
qemu-io: check registered fds in command_loop()
Some block drivers use an aio handler and do I/O completion routines
in it. However, the handler is not invoked if we only do
aio_read/write, because registered fds are not checked at all.
This patch registers an aio handler of STDIO to checks whether we can
read a command without blocking, and calls qemu_aio_wait() in
command_loop(). Any other handlers can be invoked when user input is
idle.
Kevin Wolf [Wed, 16 Jun 2010 14:38:15 +0000 (16:38 +0200)]
block: Add bdrv_(p)write_sync
Add new functions that write and flush the written data to disk immediately.
This is what needs to be used for image format metadata to maintain integrity
for cache=... modes that don't use O_DSYNC. (Actually, we only need barriers,
and therefore the functions are defined as such, but flushes is what is
implemented in this patch - we can try to change that later)
The first eject command didn't work because the is_inserted() check
failed.
I have no clue why the code had the is_inserted() check, as it doesn't matter
if there is a disk present at the host drive, when the user wants the virtual
device to be disconnected from the host device.
The is_inserted() check has another side effect: a memory leak if the "change"
command is used multiple times, as do_change() calls eject_device() before
re-opening the block device, but bdrv_close() is never called.
scsi-bus: Add MAINTENANCE_IN and MAINTENANCE_OUT SCSIRequest xfer and mode assignments
This patch updates hw/scsi-bus.c to add MAINTENANCE_IN and MAINTENANCE_OUT case in
scsi_req_length() for TYPE_ROM with MMC commands. It also adds the MAINTENANCE_OUT
case in scsi_req_xfer_mode() to set SCSI_XFER_TO_DEV for outgoing write data.
Paul Brook [Wed, 16 Jun 2010 12:03:51 +0000 (13:03 +0100)]
Usermode exec-stack fix
When loading a shared library that requires an executable stack,
glibc uses the mprotext PROT_GROWSDOWN flag to achieve this.
We don't support PROT_GROWSDOWN.
Add a special case to handle changing the stack permissions in this way.
tcg: Optionally sign-extend 32-bit arguments for 64-bit hosts.
Some hosts (amd64, ia64) have an ABI that ignores the high bits
of the 64-bit register when passing 32-bit arguments. Others
require the value to be properly sign-extended for the type.
I.e. "int32_t" must be sign-extended and "uint32_t" must be
zero-extended to 64-bits.
To effect this, extend the "sizemask" parameter to tcg_gen_callN
to include the signedness of the type of each parameter. If the
tcg target requires it, extend each 32-bit argument into a 64-bit
temp and pass that to the function call.
This ABI feature is required by sparc64, ppc64 and s390x.
projects / qemu.git / log