Gerd Hoffmann [Fri, 6 Jan 2012 14:23:10 +0000 (15:23 +0100)]
usb: kill USB_MSG_RESET
The USB subsystem pipes internal reset notifications through
usb_handle_packet() with a special magic PID. This indirection
is a pretty pointless excercise as it ends up being handled by
usb_generic_handle_packet anyway.
Replace the USB_MSG_RESET with a usb_device_reset() function
which can be called directly. Also rename the existing usb_reset()
function to usb_port_reset() to avoid confusion.
Gerd Hoffmann [Fri, 6 Jan 2012 14:13:34 +0000 (15:13 +0100)]
usb: kill USB_MSG_{ATTACH,DETACH}
The USB subsystem pipes internal attach/detach notifications through
usb_handle_packet() with a special magic PID. This indirection is a
pretty pointless excercise as it ends up being handled by
usb_generic_handle_packet anyway. Remove it.
Hans de Goede [Wed, 25 Jan 2012 08:50:39 +0000 (09:50 +0100)]
usb-redir: Add the posibility to filter out certain devices from redirecion
This patch adds the posibility to filter out certain devices from redirecion.
To use this pass the filter property to -device usb-redir. The filter
property takes a string consisting of filter rules, the format for a rule is:
<class>:<vendor>:<product>:<version>:<allow>
-1 can be used to allow any value for a field.
Muliple rules can be concatonated using | as a separator. Note that if
a device matches none of the passed in rules, redirecting it will not be
allowed!
This example will deny the Sandisk Cruzer Blade being redirected, as it
has a usb id of 0781:5567, it will allow any other usb mass storage devices,
and it will deny any other devices (the default for devices not matching any
of the rules.
Hans de Goede [Fri, 13 Jan 2012 13:28:56 +0000 (14:28 +0100)]
usb-ehci: Clear the portstatus powner bit on device disconnect
According to the EHCI spec port ownership should revert to the EHCI controller
on device disconnect. This fixes the problem of a port getting stuck on USB 1
when using redirection and plugging in a USB 2 device after a USB 1 device
has been redirected.
Gerd Hoffmann [Thu, 26 Jan 2012 12:57:40 +0000 (13:57 +0100)]
usb-uhci: implement bandwidth management
The OS is allowed to make the UHCI Controller run in circles. That is
usually done to serve multiple connected USB devices in a robin-round
fashion, so the available USB bandwidth is evenly distributed between
devices.
The uhci emulation handles this in a very poor way though. When it
figures it runs in circles it stops processing unconditionally, so
it usually processes at most a single transfer desriptor per queue,
even if there are multiple transfer descriptors are queued up.
This patch makes uhci act in a more sophisticated way. It keeps track
of successful processed transfer descriptors and transfered bytes. Then
it will stop processing when there is nothing to do (no transfer
descriptor was completed the last round) or when the transfered data
reaches the usb bandwidth limit.
Result is that the usb-storage devices connected to uhci are ten times
faster, mkfs.vfat time for a 64M stick goes down from five seconds to
a half second. Reason for this is that we are now processing up to 20
transfer descriptors (with 64 bytes each) per frame instead of a single
one.
Peter Maydell [Thu, 9 Feb 2012 06:11:16 +0000 (06:11 +0000)]
ARM devboards: Set arm_sysctl properties before init, not after
The ARM devboard models (vexpress-a9, realview, versatilepb, etc)
were accidentally trying to set one of the arm_sysctl properties
after device init. This has now become a fatal error; set the property
before device init where it should be done instead.
Anthony Liguori [Wed, 8 Feb 2012 13:23:55 +0000 (07:23 -0600)]
Merge remote-tracking branch 'aneesh/for-upstream' into staging
* aneesh/for-upstream:
hw/9pfs: Remove O_NOATIME flag from 9pfs open() calls in readonly mode
hw/9pfs: Update MAINTAINERS file
fsdev: Fix parameter parsing for proxy helper
hw/9pfs: Fix crash when mounting with synthfs
hw/9pfs: Preserve S_ISGID
hw/9pfs: Add new security model mapped-file.
Stefan Weil [Thu, 22 Dec 2011 10:18:53 +0000 (11:18 +0100)]
w32: Build windows and console executables
System emulation executables with SDL are typically windows
executables. Sometimes console executables are more useful,
so create both variants if linker option -mwindows was detected.
v2:
This version uses QEMU_PROGW / QEMU_PROG instead of QEMU_PROG / QEMU_PROGC.
Paolo Bonzini [Thu, 2 Feb 2012 12:01:40 +0000 (13:01 +0100)]
qdev: remove parse/print methods for pointer properties
Pointer properties (except for PROP_PTR of course) should not need a
legacy counterpart. In the future, relative paths will ensure that
QEMU will support the same syntax as now for drives etc..
Paolo Bonzini [Thu, 2 Feb 2012 16:12:19 +0000 (17:12 +0100)]
qdev: make the non-legacy pci address property accept an integer
PCI addresses are set with qdev_prop_uint32. Thus we make the QOM
property accept a device and function encoded in an 8-bit integer,
instead of the magic dd.f hex string.
Paolo Bonzini [Thu, 2 Feb 2012 09:17:19 +0000 (10:17 +0100)]
qdev: allow reusing get/set for legacy property
In some cases, a legacy property does need a special print method
but not a special parse method. In this case, we can reuse the get/set
from the static (non-legacy) property.
If neither parse nor print is needed, though, do not register the
legacy property at all. The previous patch ensures that the right
fallback will be used.
Paolo Bonzini [Thu, 2 Feb 2012 08:47:13 +0000 (09:47 +0100)]
qdev: remove direct calls to print/parse
There's no need to call into ->parse and ->print manually. The
QOM legacy properties do that for us.
Furthermore, in some cases legacy and static properties have exactly
the same behavior, and we could drop the legacy properties right away.
Add an appropriate fallback to prepare for this.
Paolo Bonzini [Thu, 2 Feb 2012 11:37:53 +0000 (12:37 +0100)]
qom: use object_resolve_path_type for links
This allows to restrict partial matches to objects of the expected
type. It will let people use bare names to reference drives
even though their name might be the same as a device's (e.g.
-drive id=hd0,if=none,... -device ...,drive=hd0,id=hd0).
As a useful byproduct, this fixes a problem with links of interface
type. When a link property's type is an interface, the code expects
the implementation object (not the parent object) to be stored in the
variable. The parent object does not contain the right vtable.
Paolo Bonzini [Fri, 3 Feb 2012 10:57:23 +0000 (11:57 +0100)]
qom: clean up/optimize object_dynamic_cast
The interface loop can be performed only on the parent object. It
does not need to be done on each interface. Similarly, we can
simplify the code by switching early from the implementation
object to the parent object.
Blue Swirl [Sat, 4 Feb 2012 12:18:36 +0000 (12:18 +0000)]
Merge branch 'linux-user-for-upstream' of git://git.linaro.org/people/rikuvoipio/qemu
* 'linux-user-for-upstream' of git://git.linaro.org/people/rikuvoipio/qemu:
linux-user: Fix sa_flags byte swaps for mips
linux-user: Define TARGET_QEMU_ESIGRETURN for mips64
linux-user: Define TARGET_QEMU_ESIGRETURN for mipsn32
linux-user: Add default configs for mips64[el]
linux-user: Add default-configs for mipsn32[el]
linux-user: Implement *listxattr syscalls
linux-user/syscall.c: Implement f and l versions of set/get/removexattr
linux-user: Allow NULL value pointer in setxattr and getxattr
linux-user: fix wait* syscall status returns
linux-user/strace.c: Correct errno printing for mmap etc
linux-user: fix QEMU_STRACE=1 segfault
linux-user: add SO_PEERCRED support for getsockopt
linux-user/main.c: Add option to user-mode emulation so that user can specify log file name
linux-user: fake /proc/self/auxv
linux-user: fake /proc/self/stat
linux-user: fake /proc/self/maps
linux-user: add open() hijack infrastructure
linux-user: save auxv length
linux-user: stack_base is now mandatory on all targets
Indeed, compilation failed for w32, so the bridge code is now
conditional. Hosts which don't support it can simply remove the
definition of CONFIG_NET_BRIDGE.
Anthony Liguori [Fri, 23 Dec 2011 14:47:39 +0000 (08:47 -0600)]
object: sure up reference counting
Now we have the following behavior:
1) object_new() returns an object with ref = 1
2) object_initialize() does not increase the reference count (ref may be 0).
3) object_deref() will finalize the object when ref = 0. it does not free the
memory associated with the object.
4) both link and child properties correctly set the reference count.
The expected usage is the following:
1) child devices should generally be created via object_initialize() using
memory from the parent device. Adding the object as a child property will
take ownership of the object and tie the child's life cycle to the parent.
2) If a child device is created via qdev_create() or some other form of
object_new(), there must be an object_delete() call in the parent device's
finalize function.
Anthony Liguori [Fri, 23 Dec 2011 14:35:43 +0000 (08:35 -0600)]
qom: accept any compatible type when setting a link property
Links had limited utility before as they only allowed a concrete type to be
specified. Now we can support abstract types and interfaces which means it's
now possible to have a link<PCIDevice>.
Anthony Liguori [Mon, 30 Jan 2012 14:55:55 +0000 (08:55 -0600)]
qom: move properties from qdev to object
This is mostly code movement although not entirely. This makes properties part
of the Object base class which means that we can now start using Object in a
meaningful way outside of qdev.
Anthony Liguori [Thu, 22 Dec 2011 20:40:54 +0000 (14:40 -0600)]
qom: add new command to search for types
This adds a command that allows searching for types that implement a property.
This allows you to do things like search for all available PCIDevices. In the
future, we'll also have a standard interface for things with a BlockDriverState
property that a PCIDevice could implement.
This will enable search queries like, "any type that implements the BlockDevice
interface" which would allow management tools to present available block devices
without having to hard code device names. Since an object can implement
multiple interfaces, one device could act both as a BlockDevice and a
NetworkDevice.
Anthony Liguori [Thu, 22 Dec 2011 17:05:00 +0000 (11:05 -0600)]
qdev: remove baked in notion of aliases (v2)
Limit them to the device_add functionality. Device aliases were a hack based
on the fact that virtio was modeled the wrong way. The mechanism for aliasing
is very limited in that only one alias can exist for any device.
We have to support it for the purposes of compatibility but we only need to
support it in device_add so restrict it to that piece of code.
Signed-off-by: Anthony Liguori <[email protected]>
---
v1 -> v2
- Use a table for aliases (Paolo)
Anthony Liguori [Thu, 8 Dec 2011 03:34:16 +0000 (21:34 -0600)]
qdev: register all types natively through QEMU Object Model
This was done in a mostly automated fashion. I did it in three steps and then
rebased it into a single step which avoids repeatedly touching every file in
the tree.
The first step was a sed-based addition of the parent type to the subclass
registration functions.
The second step was another sed-based removal of subclass registration functions
while also adding virtual functions from the base class into a class_init
function as appropriate.
Finally, a python script was used to convert the DeviceInfo structures and
qdev_register_subclass functions to TypeInfo structures, class_init functions,
and type_register_static calls.
We are almost fully converted to QOM after this commit.
Anthony Liguori [Sun, 4 Dec 2011 22:13:14 +0000 (16:13 -0600)]
usb-hid: simplify class initialization a bit
We can probably model USBHidDevice as a base class to get even better code
sharing but for now, just use a common function to initialize the common class
members.
Alexander Graf [Wed, 23 Nov 2011 23:44:43 +0000 (00:44 +0100)]
linux-user: fix wait* syscall status returns
When calling wait4 or waitpid with a status pointer and WNOHANG, the
syscall can potentially not modify the status pointer input. Now if we
have guest code like:
int status = 0;
waitpid(pid, &status, WNOHANG);
if (status)
<breakage>
then we have to make sure that in case status did not change we actually
return the guest's initialized status variable instead of our own uninitialized.
We fail to do so today, as we proxy everything through an uninitialized status
variable which for me ended up always containing the last error code.
This patch fixes some test cases when building yast2-core in OBS for ARM.
Peter Maydell [Mon, 21 Nov 2011 12:21:19 +0000 (12:21 +0000)]
linux-user/strace.c: Correct errno printing for mmap etc
Correct the printing of errnos for syscalls which are handled
via print_syscall_ret_addr (mmap, mmap2, brk, shmat): errnos
are returned as negative returned values at this level, not
via the host 'errno' variable.
Alexander Graf [Mon, 21 Nov 2011 11:04:07 +0000 (12:04 +0100)]
linux-user: fix QEMU_STRACE=1 segfault
While debugging some issues with QEMU_STRACE I stumbled over segmentation
faults that were pretty reproducible. Turns out we tried to treat a
normal return value as errno, resulting in an access over array boundaries
for the resolution.
Fix this by allowing failure to resolve invalid errnos into strings.
陳韋任 [Tue, 8 Nov 2011 09:46:44 +0000 (17:46 +0800)]
linux-user/main.c: Add option to user-mode emulation so that user can specify log file name
QEMU linux user-mode's default log file name is "/tmp/qemu.log". In order to
change the log file name, user need to modify the source code then recompile
QEMU. This patch allow user use "-D logfile" option to specify the log file
name.
Alexander Graf [Wed, 2 Nov 2011 19:23:26 +0000 (20:23 +0100)]
linux-user: fake /proc/self/auxv
Gtk tries to read /proc/self/auxv to find its auxv table instead of
taking it from its own program memory space.
However, when running with linux-user, we see the host's auxv which
clearly exposes wrong information. so let's instead expose the guest
memory backed auxv tables via /proc/self/auxv as well.
Alexander Graf [Wed, 2 Nov 2011 19:23:25 +0000 (20:23 +0100)]
linux-user: fake /proc/self/stat
The boehm gc finds the program's stack starting pointer by
checking /proc/self/stat. Unfortunately, so far it reads
qemu's stack pointer which clearly is wrong.
So let's instead fake the file so the guest program sees the
right address.
Alexander Graf [Wed, 2 Nov 2011 19:23:24 +0000 (20:23 +0100)]
linux-user: fake /proc/self/maps
glibc's pthread_attr_getstack tries to find the stack range from
/proc/self/maps. Unfortunately, /proc is usually the host's /proc
which means linux-user guests see qemu's stack there.
Fake the file with a constructed maps entry that exposes the guest's
stack range.
Alexander Graf [Wed, 2 Nov 2011 19:23:23 +0000 (20:23 +0100)]
linux-user: add open() hijack infrastructure
There are a number of files in /proc that expose host information
to the guest program. This patch adds infrastructure to override
the open() syscall for guest programs to enable us to on the fly
generate guest sensible files.
Alexander Graf [Sat, 28 Jan 2012 19:12:14 +0000 (21:12 +0200)]
linux-user: save auxv length
We create our own AUXV segment on stack and save a pointer to it.
However we don't save the length of it, so any code that wants to
do anything useful with it later on has to walk it again.
Instead, let's remember the length of our AUXV segment. This
simplifies later uses by a lot.
Alexander Graf [Tue, 31 Jan 2012 02:46:55 +0000 (03:46 +0100)]
PPC: E500: Populate L1CFG0 SPR
When running Linux on e500 with powersave-nap enabled, Linux tries to
read out the L1CFG0 register and calculates some things from it. Passing
0 there ends up in a division by 0, resulting in -1, resulting in badness.
So let's populate the L1CFG0 register with reasonable defaults. That way
guests aren't completely confused.
Alexander Graf [Tue, 31 Jan 2012 02:19:23 +0000 (03:19 +0100)]
PPC: E500: Implement msgsnd
This patch implements the msgsnd instruction. It is part of the
Embedded.Processor Control specification and allows one CPU to
IPI another CPU without going through an interrupt controller.
Alexander Graf [Tue, 31 Jan 2012 02:18:35 +0000 (03:18 +0100)]
PPC: E500: Implement msgclr
This patch implements the msgclr instruction. It is part of the
Embedded.Processor Control specification and clears pending doorbell
interrupts on the current CPU.
projects / qemu.git / log