Max Filippov [Mon, 9 Jan 2012 02:42:11 +0000 (06:42 +0400)]
target-xtensa: define TLB_TEMPLATE for MMU-less cores
TLB_TEMPLATE macro specifies TLB geometry in the core configuration.
Make TLB_TEMPLATE available for region protection core variants,
defining 1 way ITLB and DTLB with 8 entries each.
Gerd Hoffmann [Wed, 15 Feb 2012 08:15:37 +0000 (09:15 +0100)]
input: send kbd+mouse events only to running guests.
Trying to interact with a stopped guest will queue up the events,
then send them all at once when the guest continues running, with
a high chance to have them cause unwanted actions.
Avoid that by only injecting the input events only when the guest
is in running state.
Jan Kiszka [Tue, 24 Jan 2012 15:29:29 +0000 (16:29 +0100)]
i8259: Do not clear level-triggered lines in IRR on init
When an input line is handled as level-triggered, it will immediately
raise an IRQ on the output of a PIC again that goes through an init
reset. So only clear the edge-triggered inputs from IRR in that
scenario.
Jan Kiszka [Wed, 1 Feb 2012 19:31:43 +0000 (20:31 +0100)]
i8254: Factor out pit_get_channel_info
Instead of providing 4 individual query functions for mode, gate, output
and initial counter state, introduce a service that queries all
information at once. This comes with tiny additional costs for
pcspk_callback but with a much cleaner interface. Also, it will simplify
the implementation of the KVM in-kernel PIT model.
Jan Kiszka [Wed, 1 Feb 2012 19:31:41 +0000 (20:31 +0100)]
i8254: Rework & fix interaction with HPET in legacy mode
When the HPET enters legacy mode, the IRQ output of the PIT is
suppressed and replaced by the HPET timer 0. But the current code to
emulate this was broken in many ways. It reset the PIT state after
re-enabling, it worked against a stale static PIT structure, and it did
not properly saved/restored the IRQ output mask in the PIT vmstate.
This patch solves the PIT IRQ control in a different way. On x86, it
both redirects the PIT IRQ to the HPET, just like the RTC. But it also
keeps the control line from the HPET to the PIT. This allows to disable
the PIT QEMU timer when it is not needed. The PIT's view on the control
line state is now saved in the same format that qemu-kvm is already
using.
Note that, in contrast to the suppressed RTC IRQ line, we do not need to
save/restore the PIT line state in the HPET. As we trigger a PIT IRQ
update via the control line, the line state is reconstructed on mode
switch.
Jan Kiszka [Wed, 1 Feb 2012 19:31:40 +0000 (20:31 +0100)]
i8254: Pass alternative IRQ output object on initialization
HPET legacy emulation will require control over the PIT IRQ output. To
enable this, add support for an alternative IRQ output object to the PIT
factory function. If the isa_irq number is < 0, this object will be
used.
This also removes the IRQ number property from the PIT class as we now
use a generic GPIO output pin that is connected by the factory function.
Jan Kiszka [Wed, 1 Feb 2012 19:31:38 +0000 (20:31 +0100)]
hpet: Save/restore cached RTC IRQ level
In legacy mode, the HPET suppresses the RTC interrupt delivery via IRQ
8 but keeps track of the RTC output level and applies it when legacy
mode is turned off again. This value has to be preserved across save/
restore as it cannot be reconstructed otherwise.
To document that a raised rtc_irq_level won't survive a vmload without
a hpet/rtc_irq_level subsection, add an explicit clearing to the reset
handler.
Jan Kiszka [Wed, 1 Feb 2012 19:31:37 +0000 (20:31 +0100)]
i8254: Do not raise IRQ level on reset
Avoid changing the IRQ level to high on reset as it may trigger spurious
events. Instead, open-code the effects of pit_load_count(0) in the reset
handler.
vnc: Don't demote authentication scheme when changing password/disabling login
Currently when disabling login in VNC, the password is cleared out and the
authentication protocol is forced to AUTH_VNC. If you're using a stronger
authentication protocol, this has the effect of downgrading your security
protocol.
Fix this by only changing the authentication protocol if the current
authentication protocol is AUTH_NONE. That ensures we're never downgrading.
Signed-off-by: Daniel P. Berrange <[email protected]> Signed-off-by: Anthony Liguori <[email protected]>
--
NB. This patch is derived from one posted by Anthony last year, which got
accidentally lost after Luiz took over the QMP series work
Andreas Färber [Fri, 17 Feb 2012 01:47:44 +0000 (02:47 +0100)]
qdev: Fix qdev_try_create() semantics
Since QOM'ification, qdev_try_create() uses object_new() internally,
which asserts "type != NULL" when the type is not registered.
This was revealed by the combination of kvmclock's kvm_enabled() check
and early QOM type registration.
Check whether the class exists before calling object_new(), so that
the caller (e.g., qdev_create) can fail gracefully, telling us which
device could not be created.
Paolo Bonzini [Fri, 13 Jan 2012 16:34:03 +0000 (17:34 +0100)]
qemu-queue: drop QCIRCLEQ
The main advantage of circular lists (the fact that the head node
has the same memory layout as any other node) is completely negated
by the implementation in qemu-queue.h. Not surprisingly, nobody
uses QCIRCLEQ. While this might change if RCU is ever adopted by
QEMU, the QLIST is also RCU-friendly and in fact it is used in a
RCU-like manner by 9pfs already. So, just kill QCIRCLEQ.
Anthony Liguori [Fri, 17 Feb 2012 12:48:47 +0000 (06:48 -0600)]
Merge remote-tracking branch 'stefanha/trivial-patches' into staging
* stefanha/trivial-patches:
linux-user: brk() debugging
virtio: Remove unneeded g_free() check in virtio_cleanup()
net: remove extra spaces in help messages
fmopl: Fix typo in function name
vl.c: Fix typo in variable name
ide: fix compilation errors when DEBUG_IDE is set
cpu-exec.c: Correct comment about this file and indentation cleanup
CODING_STYLE: Clarify style for enum and function type names
linux-user: fail execve() if env/args too big
Michael Tokarev [Mon, 16 Jan 2012 14:37:44 +0000 (18:37 +0400)]
do not chdir(/) in qemu-nbd before opening all files
When qemu-nbd becomes a daemon it calls daemon(3) with
nochdir=0, so daemon(3) changes current directory to /.
But at this time, qemu-nbd did not open any user-specified
files yet, so by changing current directory, all non-absolute
paths becomes wrong. The solution is to pass nochdir=1 to
daemon(3) function, and to chdir("/") after all init has
been performed, before entering the main loop, -- just like
a good daemon should do.
Peter Maydell [Thu, 16 Feb 2012 09:56:10 +0000 (09:56 +0000)]
hw/pl031: Actually raise interrupt on timer expiry
Fix a typo in pl031_interrupt() which meant we were setting a bit
in the interrupt mask rather than the interrupt status register
and thus not actually raising an interrupt. This fix allows the
rtctest program from the kernel's Documentation/rtc.txt to pass
rather than hanging.
Peter Maydell [Thu, 16 Feb 2012 09:56:10 +0000 (09:56 +0000)]
Remove unnecessary includes of primecell.h
The primecell.h header now only has the definitions of constants
indicating the usage of the arm_sysctl GPIO lines; remove obsolete
includes of it from source files which don't care about those GPIO
lines.
Peter Maydell [Thu, 16 Feb 2012 09:56:09 +0000 (09:56 +0000)]
hw/arm_sysctl: Drop legacy init function
Drop the legacy init function arm_sysctl_init(), since it has no
users left any more. This allows us to drop the awkward '1' from
the actual device init function.
Peter Maydell [Thu, 16 Feb 2012 09:56:09 +0000 (09:56 +0000)]
arm_boot: Pass base address of GIC CPU interface, not whole GIC
The arm_boot secondary boot loader code needs the address of
the GIC CPU interface. Obtaining this from the base address
of the private peripheral region was possible for A9 and 11MPcore,
but the A15 puts the GIC CPU interface in a different place.
So make boards pass in the GIC CPU interface address directly.
Peter Maydell [Thu, 16 Feb 2012 09:56:09 +0000 (09:56 +0000)]
hw/vexpress.c: Instantiate the motherboard CLCD
Instantiate the CLCD on the vexpress motherboard as well as one on
the daughterboard -- the A15 daughterboard does not have a CLCD
and so relies on the motherboard one.
At the moment QEMU doesn't provide infrastructure for selecting
which display device gets to actually show graphics -- the first
one registered is it. Fortunately this works for the major use
case (Linux): if the daughterboard has a CLCD it will come first
and be used, otherwise we fall back to the motherboard CLCD.
So we don't (currently) need to implement the control register
which allows software to tell the mux which video output to pass
through to the outside world.
Peter Maydell [Thu, 16 Feb 2012 09:56:08 +0000 (09:56 +0000)]
hw/vexpress.c: Move secondary CPU boot code to SRAM
On real Versatile Express hardware, the boot ROM puts the secondary
CPU bootcode/holding pen in SRAM. We can therefore rely on Linux not
trashing this memory until secondary CPUs have booted up, and can
put our QEMU-specific pen code in the same place. This allows us to
drop the odd "hack" RAM page we were using before.
Peter Maydell [Thu, 16 Feb 2012 09:56:08 +0000 (09:56 +0000)]
hw/vexpress.c: Make motherboard peripheral memory map table-driven
Pull the addresses used for mapping motherboard peripherals into
memory out into a table. This will allow us to simply provide a
second table to implement the "Cortex-A Series" memory map used by
the A15 variant of Versatile Express, as well as the current
"Legacy" map used by A9.
Maksim Kozlov [Thu, 16 Feb 2012 09:56:05 +0000 (09:56 +0000)]
ARM: exynos4210: basic Power Management Unit implementation
Patch adds basic model for Exynos4210 SoC PMU.
This model implements PMU registers just as a bulk of memory. Currently,
the only reason this device exists is that secondary CPU boot loader
uses PMU INFORM5 register as a holding pen.
Peter Maydell [Wed, 8 Feb 2012 05:41:38 +0000 (05:41 +0000)]
Make -machine/-enable-kvm options merge into a single list
Make the "machine" option list use list merging, so that multiple
-machine arguments (and the -enable-kvm argument) all merge together
into a single list. Drop the calls to qemu_opts_reset() which meant
that only the last -machine or -enable-kvm option had any effect.
This fixes the bug where "-enable-kvm -machine foo" would ignore
the '-enable-kvm' option, and "-machine foo -enable-kvm" would
ignore the '-machine foo' option.
Peter Maydell [Wed, 8 Feb 2012 05:41:37 +0000 (05:41 +0000)]
qemu-option: Add support for merged QemuOptsLists
Add support for option lists which are merged together, so that
"-listname foo=bar -listname bar=baz" is equivalent to "-listname
foo=bar,bar=baz" rather than generating two separate lists of options.
Peter Maydell [Wed, 1 Feb 2012 17:23:04 +0000 (17:23 +0000)]
target-arm/helper.c: tb_flush() on CPU reset
Since target-arm has some CPUState fields for which we take the approach
of baking assumptions about them into translated code and then calling
tb_flush() when the fields change, we must also tb_flush on CPU reset,
because reset is a change of those fields.
Anthony Liguori [Wed, 15 Feb 2012 23:25:25 +0000 (17:25 -0600)]
Merge remote-tracking branch 'kraxel/usb.38' into staging
* kraxel/usb.38: (28 commits)
xhci: handle USB_RET_NAK
xhci: remote wakeup support
xhci: kill port arg from xhci_setup_packet
xhci: stop on errors
xhci: add trb type name lookup support.
xhci: signal low- and fullspeed support
usb: add USBBusOps->wakeup_endpoint
usb: pass USBEndpoint to usb_wakeup
usb: maintain async packet list per endpoint
usb: Set USBEndpoint in usb_packet_setup().
usb: add USBEndpoint->{nr,pid}
usb: USBPacket: add status, rename owner -> ep
usb: fold usb_generic_handle_packet into usb_handle_packet
usb: kill handle_packet callback
usb-xhci: switch to usb_find_device()
usb-musb: switch to usb_find_device()
usb-ohci: switch to usb_find_device()
usb-ehci: switch to usb_find_device()
usb-uhci: switch to usb_find_device()
usb: handle dev == NULL in usb_handle_packet()
...
Anthony Liguori [Wed, 15 Feb 2012 23:18:04 +0000 (17:18 -0600)]
Merge remote-tracking branch 'kwolf/for-anthony' into staging
* kwolf/for-anthony:
AHCI: Masking of IRQs actually masks them
sheepdog: fix co_recv coroutine context
AHCI: Fix port reset race
rewrite QEMU_BUILD_BUG_ON
qcow2: Keep unknown header extension when rewriting header
qcow2: Update whole header at once
vpc: Round up image size during fixed image creation
vpc: Add support for Fixed Disk type
iSCSI: add configuration variables for iSCSI
qemu-io: add write -z option for bdrv_co_write_zeroes
qed: add .bdrv_co_write_zeroes() support
qed: replace is_write with flags field
block: perform zero-detection during copy-on-read
block: add .bdrv_co_write_zeroes() interface
cutils: extract buffer_is_zero() from qemu-img.c
Andreas Färber [Thu, 9 Feb 2012 14:20:55 +0000 (15:20 +0100)]
qom: Unify type registration
Replace device_init() with generalized type_init().
While at it, unify naming convention: type_init([$prefix_]register_types)
Also, type_init() is a function, so add preceding blank line where
necessary and don't put a semicolon after the closing brace.
Paolo Bonzini [Tue, 14 Feb 2012 09:19:53 +0000 (10:19 +0100)]
qdev: print error message before aborting
qdev_prop_set_* functions are always called by machine init functions
that should know what they're doing, so they abort on error. Still,
an assert(!errp) does not aid debugging. Print an error before aborting.
Blue Swirl [Sat, 4 Feb 2012 11:47:17 +0000 (11:47 +0000)]
ppc: remove unused variables
Fix this error:
/src/qemu/target-ppc/helper.c: In function 'booke206_tlb_to_page_size':
/src/qemu/target-ppc/helper.c:1296:14: error: variable 'tlbncfg' set but not used [-Werror=unused-but-set-variable]
Gerd Hoffmann [Fri, 20 Jan 2012 12:29:16 +0000 (13:29 +0100)]
xhci: handle USB_RET_NAK
Add a field to XHCITransfer to correctly keep track of NAK'ed usb
packets. Retry transfers when the endpoint is kicked again. Implement
wakeup_endpoint bus op so we can kick the endpoint when needed.
With this patch applied the emulated hid devices are working correctly
when hooked up to xhci. usb-tabled without polling, yay!
Gerd Hoffmann [Tue, 17 Jan 2012 12:25:46 +0000 (13:25 +0100)]
usb: pass USBEndpoint to usb_wakeup
Devices must specify which endpoint has data to transfer now.
The plan is to use the usb_wakeup() not only for remove wakeup support,
but for "data ready" signaling in general, so we can move away from
constant polling to event driven usb device emulation.
Gerd Hoffmann [Thu, 12 Jan 2012 13:26:13 +0000 (14:26 +0100)]
usb: maintain async packet list per endpoint
Maintain a list of async packets per endpoint. With the current code
the list will never receive more than a single item. I think you can
guess what the future plan is though ;)
陳韋任 [Mon, 6 Feb 2012 06:02:55 +0000 (14:02 +0800)]
cpu-exec.c: Correct comment about this file and indentation cleanup
Each target uses the #define macro (in target-xxx/cpu.h) to rename
cpu_exec (cpu-exec.c) to cpu_xxx_exec, then defines its own cpu_loop
which calls cpu_xxx_exec. So basically, cpu-exec.c is not only the i386
emulator main execution loop. This patch corrects the comment of this
file and does indentation cleanup.
Ulrich Hecht [Tue, 31 Jan 2012 11:43:16 +0000 (12:43 +0100)]
linux-user: fail execve() if env/args too big
If the host's page size is equal to or smaller than the target's, native
execve() will fail appropriately with E2BIG if called with too big an
environment for the target to handle. It may falsely succeed, however, if
the host's page size is bigger, and feed the executed target process an
environment that is too big for it to handle, at which point QEMU barfs and
exits, confusing procmail's autoconf script and causing the build to fail.
This patch makes sure that execve() will return E2BIG if the environment is
too large for the target.
Gerd Hoffmann [Thu, 12 Jan 2012 12:23:01 +0000 (13:23 +0100)]
usb: Set USBEndpoint in usb_packet_setup().
With the separation of the device lookup (via usb_find_device) and
packet processing we can lookup device and endpoint before setting up
the usb packet. So we can initialize USBPacket->ep early and keep it
valid for the whole lifecycle of the USBPacket. Also the devaddr and
devep fields are not needed any more.
Gerd Hoffmann [Thu, 12 Jan 2012 11:51:48 +0000 (12:51 +0100)]
usb: USBPacket: add status, rename owner -> ep
Add enum to track the status of USBPackets, use that instead of the
owner pointer to figure whenever a usb packet is currently in flight
or not. Add some more packet status sanity checks. Also rename the
USBEndpoint pointer from "owner" to "ep".
Gerd Hoffmann [Wed, 11 Jan 2012 11:14:02 +0000 (12:14 +0100)]
usb: fold usb_generic_handle_packet into usb_handle_packet
There is no reason to have a separate usb_generic_handle_packet function
any more, fold it into usb_handle_packet(). Also call the do_token_*
functions which handle control transfer emulation for control pipe
packets only.
Gerd Hoffmann [Wed, 11 Jan 2012 10:16:20 +0000 (11:16 +0100)]
usb: kill handle_packet callback
All drivers except usb-hub use usb_generic_handle_packet. The only
reason the usb hub has its own function is that it used to be called
with packets which are intended for downstream devices. With the new,
separate device lookup step this doesn't happen any more, so the need
for a different handle_packet callback is gone.
So we can kill the handle_packet callback and just call
usb_generic_handle_packet directly. The special hub handling in
usb_handle_packet() can go away for the same reason.
Gerd Hoffmann [Tue, 10 Jan 2012 16:08:13 +0000 (17:08 +0100)]
usb-hub: implement find_device
Implement the find_device callback for the usb hub. It'll loop over all
ports, calling usb_find_device for all enabled ports until it finds a
matching device.
projects / qemu.git / log