CC block.o
cc1: warnings being treated as errors
block.c: In function 'bdrv_open2':
block.c:400: error: ignoring return value of 'realpath', declared with attribute warn_unused_result
CC block/bochs.o
cc1: warnings being treated as errors
block/bochs.c: In function 'seek_to_sector':
block/bochs.c:202: error: ignoring return value of 'read', declared with attribute warn_unused_result
make: *** [block/bochs.o] Error 1
CC savevm.o
cc1: warnings being treated as errors
savevm.c: In function 'file_put_buffer':
savevm.c:342: error: ignoring return value of 'fwrite', declared with attribute warn_unused_result
make: *** [savevm.o] Error 1
CC slirp/misc.o
cc1: warnings being treated as errors
slirp/misc.c: In function 'fork_exec':
slirp/misc.c:209: error: ignoring return value of 'write', declared with attribute warn_unused_result
make: *** [slirp/misc.o] Error 1
CC i386-softmmu/pc.o
cc1: warnings being treated as errors
/usr/src/RPM/BUILD/qemu-0.11.92/hw/pc.c: In function 'load_multiboot':
/usr/src/RPM/BUILD/qemu-0.11.92/hw/pc.c:614: error: ignoring return value of 'fread', declared with attribute warn_unused_result
/usr/src/RPM/BUILD/qemu-0.11.92/hw/pc.c: In function 'load_linux':
/usr/src/RPM/BUILD/qemu-0.11.92/hw/pc.c:888: error: ignoring return value of 'fread', declared with attribute warn_unused_result
/usr/src/RPM/BUILD/qemu-0.11.92/hw/pc.c:889: error: ignoring return value of 'fread', declared with attribute warn_unused_result
make[1]: *** [pc.o] Error 1
CC libuser/path.o
cc1: warnings being treated as errors
/usr/src/RPM/BUILD/qemu-0.11.92/path.c: In function 'new_entry':
/usr/src/RPM/BUILD/qemu-0.11.92/path.c:49: error: ignoring return value of 'asprintf', declared with attribute warn_unused_result
make[1]: *** [path.o] Error 1
Aurelien Jarno [Thu, 24 Dec 2009 00:00:41 +0000 (01:00 +0100)]
MAC DBDMA: store register values in native endianness
Store the register values in native endianness, by dropping all the
endianness conversion functions, and converting the endianness in
dbdma_readl/dbdma_writel instead.
Also guard the endianness conversion with TARGET_WORDS_BIGENDIAN to
simulate the backward connection of the bus.
Scott Tsai [Tue, 22 Dec 2009 20:30:18 +0000 (04:30 +0800)]
USB: Improve usbdevice error messages
When an non-existent USB device is specified on the command line,
print "qemu: could not add USB device 'X'".
Likewise for the usb_{add,del} monitor commands.
Split out tcg_out_cmp and properly handle immediate arguments.
Fix constraints on brcond to match what SUBCC accepts.
Add tcg_out_brcond2_i32 for 32-bit host.
tcg-sparc: Use TCG_TARGET_REG_BITS in conditional compilation.
The test TCG_TARGET_REG_BITS==64 is exactly the feature that we
are checking for, whereas something involving __sparc_v9__ or
__sparc_v8plus__ should be reserved for something ISA related,
as with SMULX.
Generate sign-extended 32-bit constants with SETHI+XOR.
Otherwise tidy the routine to avoid the need for
conditional compilation and code duplication with movi_imm32.
Alexander Graf [Mon, 21 Dec 2009 11:24:17 +0000 (12:24 +0100)]
PPC64: Fix timebase
On PPC we have a 64-bit time base. Usually (PPC32) this is accessed using
two separate 32 bit SPR accesses to SPR_TBU and SPR_TBL.
On PPC64 the SPR_TBL register acts as 64 bit though, so we get the full
64 bits as return value. If we only take the lower ones, fine. But Linux
wants to see all 64 bits or it breaks.
This patch makes PPC64 Linux work even after TB crossed the 32-bit boundary,
which usually happened a few seconds after bootup.
Alpha always used 32-bit uids, but never renamed the syscalls
to match i386 when 32-bit uids were added there. This enables
the proper bits in syscall.c.
Kevin Wolf [Sat, 19 Dec 2009 20:15:20 +0000 (21:15 +0100)]
Multiboot support: Fix rom_copy
ROMs need to be loaded if they are anywhere in the requested area, not
only at the very beginning. This fixes Multiboot with ELF kernels that
have more than one program header.
Nathan Froyd [Fri, 11 Dec 2009 17:04:46 +0000 (09:04 -0800)]
linux-user: commonify definitions of target typedefs
There's no sense in separately declaring target_{elf_greg,uid,gid,pid}_t
for every architecture. Just declare them once with appropriate
USE_UID16 handling.
Riku Voipio [Fri, 4 Dec 2009 13:16:32 +0000 (15:16 +0200)]
linux-user: cleanup force_sig() calls
Force_sig should be always called with TARGET_ signals.
Not that it really matters with SEGV, so this patch is
just for cleanup and improving consistency.
Riku Voipio [Fri, 4 Dec 2009 13:16:31 +0000 (15:16 +0200)]
linux-user: Fix mmap_lock ordering
mmap_lock() can be called while tb_lock() is being held. To
avoid deadlock when one thread is holding mmap_lock and another
tb_lock, _always_ lock first tb_lock().
do_migrate_set_speed() accepts a suffix for the 'value' argument and this is
not good for QMP. We will have to add a new argument type to handle that and
this will have to wait for 0.13.
Luiz Capitulino [Fri, 18 Dec 2009 15:25:03 +0000 (13:25 -0200)]
QMP: Update spec file
- Remove "draft" status
- Change default success response to be json-object
- Change error and event data member to be a json-object
- Update examples
- Add new section "Compatibility Considerations"
- Other fixes and clarifications
Riku Voipio [Thu, 3 Dec 2009 13:56:08 +0000 (15:56 +0200)]
usb-musb: convert fifo to 8bit and add more registers
Convert musb fifo to 8bit to allow 8/16/32bit access
MUSB allows reading and writing to the fifo in 32/16/8 bit
width. The Linux kernel does this sometimes, most usually at
the end of writing the packet to allow packet to end at a
odd bytecount.
Convert the fifo to 8bit allows removing lots of shifts
which shows that the fifo is more natural as 8bit.
While at it, add multiple missing register definitions and
and cleanup debug prints.
Gerd Hoffmann [Fri, 18 Dec 2009 11:01:12 +0000 (12:01 +0100)]
roms: remove option rom packing logic
Now that we load the option roms via fw_cfg, we can stop copying
them to the 0xc000 -> 0xe000. The patch does just that.
Also the rom loader gets simplified as all remaining users of the
rom loader load the bits at a fixed address so the packing and
aligning logic can go away.
Gerd Hoffmann [Fri, 18 Dec 2009 11:01:10 +0000 (12:01 +0100)]
fw_cfg: add API for file transfer.
This patch adds a file transfer interface to fw_cfg. Intended to be
used for passing non-pci option roms and vgabios to seabios. Namespace
is modeled after the existing cbfs filesystem support in seabios.
Reading the new FW_CFG_FILE_DIR entry returns a file list.
Fields there are in network byte order (aka bigendian).
aliguori: fix fw_cfg.h for multiboot.bin, add proper fw_cfg.h declarations,
quiet fprintf() in fw_cfg.c
Gerd Hoffmann [Fri, 18 Dec 2009 11:01:08 +0000 (12:01 +0100)]
pci romfiles: add property, add default to PCIDeviceInfo
This patch adds a romfile property to the pci bus. It allows to specify
a romfile to load into the rom bar of the pci device. The default value
comes from a new field in PCIDeviceInfo. The property allows to change
the file and also to disable the rom loading using an empty string.
Anthony Liguori [Fri, 18 Dec 2009 11:01:07 +0000 (12:01 +0100)]
Support PCI based option rom loading
Currently, we preload option roms into the option rom space in memory. This
prevents DDIM from functioning correctly which severely limits the number
of roms we can support.
This patch introduces a pci_add_option_rom() which registers the
PCI_ROM_ADDRESS bar which points to our option rom. It also converts over
the cirrus vga adapter, the rtl8139, virtio, and the e1000 to use this
new mechanism.
The result is that PXE boot functions even with three unique types of cards.
Anthony Liguori [Thu, 17 Dec 2009 22:08:10 +0000 (08:08 +1000)]
VMware VGA: Only enable dirty log tracking when fifo is disabled
This patch enables dirty log tracking whenever it's needed and disables it
when it is not.
We unconditionally enable dirty log tracking on reset, restart dirty log
tracking when PCI IO regions are remapped, and disable/enable it based on
commands from the guest.
Anthony Liguori [Thu, 17 Dec 2009 22:08:09 +0000 (08:08 +1000)]
Fix VMware VGA depth computation
VMware VGA requires that the depth presented to the guest is the same as the
DisplaySurface that it renders to. This is because it performs a very simple
memcpy() to blit from one surface to another.
We currently hardcode a 24-bit depth. The surface allocator for SDL may, and
usually will, allocate a surface with a different depth causing screen
corruption.
This changes the code to allocate the DisplaySurface before initializing the
device which allows the depth of the DisplaySurface to be used instead of
hardcoding something.
Anthony Liguori [Thu, 17 Dec 2009 22:08:07 +0000 (08:08 +1000)]
Make sure to enable dirty tracking of VBE vram mapping
Apparently, VBE maps the VGA vram to a fixed physical location. KVM requires
that all mappings of the VGA vram have dirty tracking enabled on them. Any
access to the VGA vram through the VBE mapping currently fails to result in
dirty page tracking updates causing a black screen.
This is the true root cause of VMware VGA not working correctly under KVM and
likely also an issue with some of the std-vga black screen issues too.
Cirrus does not enable VBE so it would not be a problem when using Cirrus.
Gerd Hoffmann [Wed, 16 Dec 2009 13:22:11 +0000 (14:22 +0100)]
qdev: improve property error reporting.
Add a error message in case we fail to parse a qdev property.
Also make qemu not abort() in case setting a global property can't be
set. This used to be a clear programming error. The introduction of
the -global switch changed that though, so better exit instead (after
printing the new error message).
projects / qemu.git / log