Wenchao Xia [Wed, 5 Mar 2014 02:44:39 +0000 (18:44 -0800)]
qapi script: do not allow string discriminator
Since enum based discriminators provide better type-safety and
ensure that future qapi additions do not forget to adjust dependent
unions, forbid using string as discriminator from now on.
Wenchao Xia [Fri, 7 Mar 2014 01:08:56 +0000 (17:08 -0800)]
qapi script: support enum type as discriminator in union
By default, any union will automatically generate a enum type as
"[UnionName]Kind" in C code, and it is duplicated when the discriminator
is specified as a pre-defined enum type in schema. After this patch,
the pre-defined enum type will be really used as the switch case
condition in generated C code, if discriminator is an enum field.
Wenchao Xia [Wed, 5 Mar 2014 02:44:36 +0000 (18:44 -0800)]
qapi script: use same function to generate enum string
Prior to this patch, qapi-visit.py used custom code to generate enum
names used for handling a qapi union. Fix it to instead reuse common
code, with identical generated results, and allowing future updates to
generation to only need to touch one place.
Wenchao Xia [Wed, 5 Mar 2014 02:44:34 +0000 (18:44 -0800)]
qapi script: check correctness of union
Since line info is remembered as QAPISchema.line now, this patch
uses it as additional info for every expr in QAPISchema inside qapi.py,
then improves error message with it in checking of exprs.
For common union the patch will check whether base is a valid complex
type if specified. For flat union it will check whether base presents,
whether discriminator is found in base, whether the key of every branch
is correct when discriminator is an enum type.
Wenchao Xia [Wed, 5 Mar 2014 02:44:33 +0000 (18:44 -0800)]
qapi script: remember line number in schema parsing
Before this patch, 'QAPISchemaError' scans whole input until 'pos'
to get error line number. After this patch, the scan is avoided since
line number is remembered in schema parsing. This patch also benefits
other error report functions, which would be introduced later.
Peter Maydell [Mon, 10 Mar 2014 19:14:11 +0000 (19:14 +0000)]
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi,pc,pci,virtio,memory bug fixes
This collects several small fixes from all over the place.
Additionally, Marcel's changes make acpi unit tests more robust.
Signed-off-by: Michael S. Tsirkin <[email protected]>
# gpg: Signature made Sun 09 Mar 2014 19:14:57 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <[email protected]>"
# gpg: aka "Michael S. Tsirkin <[email protected]>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
qemu: x86: ignore ioapic polarity
pckbd: return 'keyboard enabled' on read input port command
pam: partly fix write-only mode
acpi-test: issue errors instead of warnings when possible
acpi-test: retain both asl and aml files on failure
MAINTAINERS: drop an out of date address
Add a 'name' parameter to qemu_thread_create
Add 'debug-threads' suboption to --name
Rework --name to use QemuOpts
PCIE: fix regression with coldplugged multifunction device
memory_region_present: return false if address is not found in child MemoryRegion
virtio-net: remove function calls from assert
acpi-test-data: update expected files
acpi-build: append description for non-hotplug
Lets add Conny and myself as maintainers for s390/kvm and
related code. This does not include any tcg related code,
which is maintained by Richard and Alex.
Peter Maydell [Mon, 10 Mar 2014 16:22:39 +0000 (16:22 +0000)]
Merge remote-tracking branch 'remotes/riku/linux-user-for-upstream' into staging
* remotes/riku/linux-user-for-upstream:
linux-user: set minimum kernel version to 2.6.32
linux-user: correct handling of break exception for MIPS
linux-user: translate signal number on return from sigtimedwait
linux-user: Implement sendmmsg syscall
linux-user: Fix getresuid, getresgid if !USE_UID16
linux-user: Don't use UID16 on AArch64
linux-user: AArch64: Implement SA_RESTORER for signal handlers
linux-user/signal.c: Fix AArch64 big-endian FP register restore
Peter Maydell [Mon, 10 Mar 2014 12:34:41 +0000 (12:34 +0000)]
Merge remote-tracking branch 'remotes/rth/tcg-aarch-6-1' into staging
* remotes/rth/tcg-aarch-6-1:
tcg-aarch64: Remove nop from qemu_st slow path
tcg-aarch64: Simplify tcg_out_ldst_9 encoding
tcg-aarch64: Use intptr_t apropriately
tcg-aarch64: Remove the shift_imm parameter from tcg_out_cmp
tcg-aarch64: Hoist common argument loads in tcg_out_op
tcg-aarch64: Don't handle mov/movi in tcg_out_op
tcg-aarch64: Set ext based on TCG_OPF_64BIT
tcg-aarch64: Change all ext variables to TCGType
tcg-aarch64: Remove redundant CPU_TLB_ENTRY_BITS check
tcg-aarch64: Enable builtin disassembler
Riku Voipio [Wed, 19 Feb 2014 12:50:41 +0000 (14:50 +0200)]
linux-user: set minimum kernel version to 2.6.32
Popular glibc based distributions[1] require minimum
2.6.32 as kernel version. For some targets 2.6.18
would be enough, but dropping so low would mean some
suboptimal system calls could get used.
Set the minimum kernel advertized to 2.6.32 for
all architectures but aarch64 to ensure working qemu
linux-user in case host kernel is older.
Peter Lieven [Wed, 8 Jan 2014 09:08:36 +0000 (10:08 +0100)]
ui/vnc: optimize clearing in find_and_clear_dirty_height()
The following artifical test (just the bitmap operation part) running
vnc_update_client 65536 times on a 2560x2048 surface illustrates the
performance difference:
Peter Lieven [Wed, 8 Jan 2014 09:08:35 +0000 (10:08 +0100)]
ui/vnc: optimize dirty bitmap tracking
vnc_update_client currently scans the dirty bitmap of each client
bitwise which is a very costly operation if only few bits are dirty.
vnc_refresh_server_surface does almost the same.
this patch optimizes both by utilizing the heavily optimized
function find_next_bit to find the offset of the next dirty
bit in the dirty bitmaps.
The following artifical test (just the bitmap operation part) running
vnc_update_client 65536 times on a 2560x2048 surface illustrates the
performance difference:
All bits clean - vnc_update_client_new: 0.07 secs
vnc_update_client_old: 10.98 secs
All bits dirty - vnc_update_client_new: 11.26 secs
vnc_update_client_old: 20.19 secs
Few bits dirty - vnc_update_client_new: 0.08 secs
vnc_update_client_old: 10.98 secs
The case for all bits dirty is still rather slow, this
is due to the implementation of find_and_clear_dirty_height.
This will be addresses in a separate patch.
Gerd Hoffmann [Thu, 6 Mar 2014 12:54:28 +0000 (13:54 +0100)]
vnc: fix use-after-free in vnc_update_client_sync
Spotted by Coverity:
876 static int vnc_update_client_sync(VncState *vs, int has_dirty)
877 {
(1) Event freed_arg: "vnc_update_client(VncState *, int)" frees "vs". [details]
Also see events: [deref_arg]
878 int ret = vnc_update_client(vs, has_dirty);
(2) Event deref_arg: Calling "vnc_jobs_join(VncState *)" dereferences freed pointer "vs". [details]
Also see events: [freed_arg]
879 vnc_jobs_join(vs);
880 return ret;
881 }
Remove vnc_update_client_sync wrapper, replace it with an additional
argument to vnc_update_client, so we can so the sync properly in
vnc_update_client (i.e. skip it in case of a client disconnect).
Gonglei (Arei) [Thu, 23 Jan 2014 13:30:57 +0000 (13:30 +0000)]
vnc: Fix qemu crashed when vnc client disconnect suddenly
Hi,
When I use RealVNC viewer client (http://www.realvnc.com/) to connect vnc server,
the client disconnect suddenly, and I click reconnect button immediately, then the Qemu crashed.
In the function vnc_worker_thread_loop, will call vnc_async_encoding_start
to set the local vs->output buffer by global queue's buffer. Then send rectangles to
the vnc client call function vnc_send_framebuffer_update. Finally, Under normal circumstances,
call vnc_async_encoding_end to set the global queue'buffer by the local vs->output conversely.
When the vnc client disconnect, the job->vs->csock will be set to -1. And the current prcoess
logic will goto disconnected partion without call function vnc_async_encoding_end.
But, the function vnc_send_framebuffer_update will call buffer_reserve, which
maybe call g_realloc reset the local vs's buffer, meaning the global queue's buffer is modified also.
If anyone use the original global queue's buffer memory will cause corruption and then crash qemu.
This patch assure the function vnc_async_encoding_end being called
even though the vnc client disconnect suddenly.
vnc: Fix tight_detect_smooth_image() for lossless case
VncTight member uint8_t quality is either (uint8_t)-1 for lossless or
less than 10 for lossy.
tight_detect_smooth_image() first promotes it to int, then compares
with -1. Always unequal, so we always execute the lossy code. Reads
beyond tight_conf[] and returns crap when quality is actually
lossless.
Compare to (uint8_t)-1 instead, like we do elsewhere.
Gabriel L. Somlo [Fri, 28 Feb 2014 18:57:19 +0000 (13:57 -0500)]
qemu: x86: ignore ioapic polarity
Both QEMU and KVM have already accumulated a significant number of
optimizations based on the hard-coded assumption that ioapic polarity
will always use the ActiveHigh convention, where the logical and
physical states of level-triggered irq lines always match (i.e.,
active(asserted) == high == 1, inactive == low == 0). QEMU guests
are expected to follow directions given via ACPI and configure the
ioapic with polarity 0 (ActiveHigh). However, even when misbehaving
guests (e.g. OS X <= 10.9) set the ioapic polarity to 1 (ActiveLow),
QEMU will still use the ActiveHigh signaling convention when
interfacing with the emulated ioapic.
This patch modifies the emulated ioapic to completely ignore polarity
as set by the guest OS, enabling misbehaving guests to work alongside
those which comply with the ActiveHigh polarity specified by QEMU's
ACPI tables.
Hervé Poussineau [Tue, 11 Feb 2014 22:46:02 +0000 (23:46 +0100)]
pam: partly fix write-only mode
In write-only mode, writes are forwarded to RAM, while reads should not be
handled (ie should return 0xff).
Assume that in this mode, no read access is ever done, as they shouldn't
give any sensible result.
So, in write-only mode, alias PAM region to RAM, instead of PCI memory
(which can even be mapped to some device!)
This fixes Award BIOS, which use this mode to shadow system BIOS and video BIOS.
Marcel Apfelbaum [Thu, 27 Feb 2014 14:17:32 +0000 (16:17 +0200)]
acpi-test: issue errors instead of warnings when possible
If the expected (offline) acpi tables loaded correctly,
it is safe to assume the iasl installation is OK and
issue an error if the actual tables failed to load.
Igor Mammedov [Mon, 17 Feb 2014 14:00:06 +0000 (15:00 +0100)]
PCIE: fix regression with coldplugged multifunction device
PCIE is causing asserts each time a multifunction device is added
on command line (coldplug).
This is caused by
commit a66e657e18cd9b70e9f57ae5512c07faf2bc508f
pci/pcie: convert PCIE hotplug to use hotplug-handler API
QEMU abort is caused by misplaced assertion, which should
be checked only when device is hotplugged.
Reference to regression report:
http://www.mail-archive.com/[email protected]/msg216226.html
That is caused by the fact that QEMU reports to
OSPM that device is present by setting 5th bit in
PII4XPM.pci_conf[0x67] register when COM2 doesn't
exist.
It happens due to memory_region_present(io_as, 0x2f8)
returning false positive since 0x2f8 address eventually
translates into catchall io_as address space.
Fix memory_region_present(parent, addr) by returning
true only if addr maps into a MemoryRegion within
parent (excluding parent itself), to match its
doc comment.
While at it fix copy/paste error in
memory_region_present() doc comment.
Note: this is a temporary hack: we really need better handling for
unassigned regions, we should avoid fallback regions since they are bad
for performance (breaking radix tree assumption that the data structure
is sparsely populated); for memory we need to fix this to implement PCI
master abort properly, anyway.
Joel Stanley [Tue, 11 Feb 2014 00:12:02 +0000 (10:42 +1030)]
virtio-net: remove function calls from assert
peer_{de,at}tach were called from inside assert().
We don't support building without NDEBUG but it's not tidy.
Rearrange to attach peer outside assert calls.
As reported in
http://article.gmane.org/gmane.comp.emulators.qemu/253987
Mac OSX actually requires describing all occupied slots
in ACPI - even if hotplug isn't enabled.
I didn't expect this so I dropped description of all
non hotpluggable slots from ACPI.
As a result: before
commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable
hotplug for pci bridges), PCI cards show up in the "device tree" of OS X
(System Information). E.g., on MountainLion users have:
Hardware -> PCI Cards:
Card Type Driver Installed Slot
*ethernet Ethernet Controller Yes PCI Slot 2
pci8086,2934 USB UHC Yes PCI Slot 29
Ethernet still works, but it's not showing up on the PCI bus, and it
no longer thinks it's plugged in to slot #2, as it used to before the
change.
To fix, append description for all occupied non hotpluggable PCI slots.
One need to be careful when doing this: VGA devices
are now described in SSDT, so we need to drop description from DSDT.
And ISA devices are used in DSDT so drop them from SSDT.
Reported-by: Gabriel L. Somlo <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>
Also update generated dsdt and pcihp hex dump files.
At first glance the code appears to be using 1's compliment encoding,
a-la AArch32. Except that the constant is "off", creating a complicated
split field 2's compliment encoding.
Gonglei [Tue, 4 Mar 2014 13:29:21 +0000 (21:29 +0800)]
XBZRLE: Fix qemu crash when resize the xbzrle cache
Resizing the xbzrle cache during migration causes qemu-crash,
because the main-thread and migration-thread modify the xbzrle
cache size concurrently without lock-protection.
Peter Maydell [Sat, 8 Mar 2014 12:38:43 +0000 (12:38 +0000)]
Merge remote-tracking branch 'remotes/kvaneesh/for-upstream' into staging
* remotes/kvaneesh/for-upstream:
hw/9pfs: Include virtio-9p-device.o in build
hw/9pfs: use g_strdup_printf() instead of PATH_MAX limitation
hw/9pfs/virtio-9p-local.c: use snprintf() instead of sprintf()
hw/9pfs/virtio-9p-local.c: move v9fs_string_free() to below "err_out:"
fsdev: Fix overrun after readlink() fills buffer completely
Peter Maydell [Sat, 8 Mar 2014 12:17:17 +0000 (12:17 +0000)]
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches
# gpg: Signature made Fri 07 Mar 2014 13:30:04 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <[email protected]>"
* remotes/kevin/tags/for-upstream:
block: qemu-iotests 085 - live snapshots tests
hw/ide/ahci.h: Avoid shifting left into sign bit
block: Fix error path segfault in bdrv_open()
qemu-iotests: Test a few blockdev-add error cases
blockdev: Fix NULL pointer dereference in blockdev-add
blockdev: Fail blockdev-add with encrypted images
block/raw-win32: Strip "file:" prefix on creation
block/raw-win32: Implement bdrv_parse_filename()
block/raw-posix: Strip "file:" prefix on creation
block/raw-posix: Implement bdrv_parse_filename()
block: Keep "filename" option after parsing
block: mirror - remove code cruft that has no function
block: make bdrv_swap rebuild the bs graph node list field.
block: Fix bs->request_alignment assertion for bs->sg=1
iscsi: Use bs->sg for everything else than disks
qemu-iotests: Test progress output for conversion
qemu-img convert: Fix progress output
gluster: Remove unused defines and header include
gluster: Change licence to GPLv2+
Andreas Färber [Fri, 7 Mar 2014 21:42:08 +0000 (22:42 +0100)]
xenfb: Fix graphic_console_init() build failure
In commit 5643706a095044d75df1c0588aac553a595b972b (console: add head
to index to qemu consoles.) graphic_console_init() was extended to take
an additional argument, but xenfb was not updated accordingly. Fix it.
Peter Maydell [Fri, 7 Mar 2014 18:29:32 +0000 (18:29 +0000)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-input-4' into staging
Input handling rewrite.
SDL2 support.
# gpg: Signature made Wed 05 Mar 2014 11:16:08 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <[email protected]>"
# gpg: aka "Gerd Hoffmann <[email protected]>"
# gpg: aka "Gerd Hoffmann (private) <[email protected]>"
* remotes/kraxel/tags/pull-input-4: (38 commits)
ui/sdl2 : initial port to SDL 2.0 (v2.0)
console: add QemuUIInfo
console: add head to index to qemu consoles.
input: remove index_from_keycode (no users)
input: move do_mouse_set to new core
input: move qmp_query_mice to new core
input: add input_mouse_mode tracepoint
input: move mouse mode notifier to new core
input-legacy: remove kbd_mouse_event
input-legacy: remove kbd_mouse_is_absolute
input-legacy: remove kbd_mouse_has_absolute
input-legacy: remove kbd_put_keycode
input: trace events
input: mouse: switch cocoa ui to new core
input: keyboard: switch cocoa ui to new core
input: mouse: switch monitor to new core
input: mouse: switch spice ui to new core
input: mouse: switch vnc ui to new core
input: mouse: switch sdl ui to new core
input: mouse: switch gtk ui to new core
...
Peter Maydell [Fri, 7 Mar 2014 16:36:37 +0000 (16:36 +0000)]
Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' into staging
Patch queue for ppc - 2014-03-05
This pull request includes:
- VSX emulation support
- book3s pr/hv selection
- some bug fixes
- qdev stable numbering
- eTSEC emulation
# gpg: Signature made Wed 05 Mar 2014 02:14:19 GMT using RSA key ID 03FEDC60
# gpg: Can't check signature: public key not found
* remotes/agraf/tags/signed-ppc-for-upstream: (130 commits)
target-ppc: spapr: e500: fix to use cpu_dt_id
target-ppc: add PowerPCCPU::cpu_dt_id
target-ppc: Introduce hypervisor call H_GET_TCE
target-ppc: Update ppc_hash64_store_hpte to support updating in-kernel htab
target-ppc: Change the hpte store API
target-ppc: Fix page table lookup with kvm enabled
target-ppc: Fix htab_mask calculation
target-ppc: Use Additional Temporary in stqcx Case
target-ppc: Fix Compiler Warnings Due to 64-Bit Constants Declared as UL
PPC: sPAPR: Only use getpagesize() when we run with kvm
target-ppc/translate.c: Use ULL suffix for 64 bit constants
spapr-vlan: flush queue whenever can_receive can go from false to true
target-ppc: Altivec 2.07: Vector Permute and Exclusive OR
target-ppc: Altivec 2.07: Vector SHA Sigma Instructions
target-ppc: Altivec 2.07: AES Instructions
target-ppc: Altivec 2.07: Binary Coded Decimal Instructions
target-ppc: Altivec 2.07: Vector Polynomial Multiply Sum
target-ppc: Altivec 2.07: Vector Gather Bits by Bytes
target-ppc: Altivec 2.07: Doubleword Compares
target-ppc: Altivec 2.07: vbpermq Instruction
...
Peter Maydell [Wed, 26 Feb 2014 21:53:30 +0000 (21:53 +0000)]
configure: Always build with -fno-common
MacOSX doesn't pull .o files from .a archives if the symbol that it
requires is one which the .o file defines as a common symbol.
(Common symbols are those declared without "extern"; the linker
will merge together common symbols with the same name, so
redeclaring the same variable in two compilation units results in
them referring to the same symbol rather than a compilation error).
This MacOSX difference from traditional linker behaviour means that
"make check" produces link errors:
Undefined symbols for architecture x86_64:
"_cur_mon", referenced from:
_error_vprintf in libqemuutil.a(qemu-error.o)
_error_printf in libqemuutil.a(qemu-error.o)
_error_printf_unless_qmp in libqemuutil.a(qemu-error.o)
_error_print_loc in libqemuutil.a(qemu-error.o)
_error_report in libqemuutil.a(qemu-error.o)
ld: symbol(s) not found for architecture x86_64
in this case because "cur_mon" is a common symbol in
libqemustub.a(mon-set-error.o).
In QEMU we don't make any use at all of the common symbol
functionality, so we can avoid this problem entirely simply
by compiling with -fno-common. Enable this option for all
builds, not just MacOSX, so that if we ever inadvertently
introduce multiple definitions of some variable that will
be immediately spotted as a build error rather than only
breaking the MacOSX build.
Peter Maydell [Tue, 25 Feb 2014 18:27:49 +0000 (18:27 +0000)]
configure: Make C++ test work with --enable-werror
gcc's C++ compiler complains about being passed some -W options
which make sense for C but not for C++. This means we mustn't try
a C++ compile with QEMU_CFLAGS, but only with a filtered version
that removes the offending options. This filtering was already being
done for uses of C++ in the build itself, but was omitted for the
"does C++ work?" configure test. This only showed up when doing
builds which explicitly enabled -Werror with --enable-werror,
because the "do the compilers work" tests were mistakenly placed
above the "default werror based on whether compiling from git" code.
Another error in this category is that clang warns if you ask it to
compile C++ code from a file named "foo.c". Further, because we
were running do_cc in a subshell in the condition part of an "if",
the error_exit inside do_compiler wouldn't terminate configure and
we would plunge on regardless. Fix this complex of errors:
1. Move the default-werror code up so that there are no invocations
of compile_object and friends between it and the point where we
set $werror explicitly based on the --enable-werror command line
option.
2. Provide a mechanism for filtering QEMU_CFLAGS to create
QEMU_CXXFLAGS, and use it for the test we run here.
3. Provide a do_cxx function to run a test with the C++ compiler
rather than doing cute tricks with subshells and do_cc.
4. Use a new temporary file TMPCXX for the C++ program fragment.
Kevin Wolf [Thu, 6 Mar 2014 15:34:46 +0000 (16:34 +0100)]
block: Fix error path segfault in bdrv_open()
Using an invalid option for a block device that is opened with
BDRV_O_PROTOCOL led to drv = NULL, and when trying to include the driver
name in the error message, qemu dereferenced it:
With this patch applied, the expected error message is printed:
$ x86_64-softmmu/qemu-system-x86_64 -drive file=/tmp/test.qcow2,file.foo=bar
qemu-system-x86_64: -drive file=/tmp/test.qcow2,file.foo=bar: could
not open disk image /tmp/test.qcow2: Block protocol 'file' doesn't
support the option 'foo'
Kevin Wolf [Thu, 6 Mar 2014 14:47:32 +0000 (15:47 +0100)]
blockdev: Fix NULL pointer dereference in blockdev-add
If aio=native, we check that cache.direct is set as well. If however
cache wasn't specified at all, qemu just segfaulted.
The old condition didn't make any sense anyway because it effectively
only checked for the default cache mode case, but not for an explicitly
set cache.direct=off mode.
Kevin Wolf [Thu, 6 Mar 2014 14:43:42 +0000 (15:43 +0100)]
blockdev: Fail blockdev-add with encrypted images
Encrypted images need a password before they can be used, and we don't
want blockdev-add to create BDSes that aren't fully initialised. So for
now simply forbid encrypted images; we can come back to it later if we
need the functionality.
Max Reitz [Wed, 5 Mar 2014 21:41:36 +0000 (22:41 +0100)]
block: Keep "filename" option after parsing
Currently, bdrv_file_open() always removes the "filename" option from
the options QDict after bdrv_parse_filename() has been (successfully)
called. However, for drivers with bdrv_needs_filename, it makes more
sense for bdrv_parse_filename() to overwrite the "filename" option and
for bdrv_file_open() to fetch the filename from there.
Since there currently are no drivers that implement
bdrv_parse_filename() and have bdrv_needs_filename set, this does not
change current behavior.
Jeff Cody [Tue, 4 Mar 2014 15:35:48 +0000 (10:35 -0500)]
block: mirror - remove code cruft that has no function
Originally, this built up the error message with the backing filename,
so that errp was set as follows:
error_set(errp, QERR_OPEN_FILE_FAILED, backing_filename);
However, we now propagate the local_error from the
bdrv_open_backing_file() call instead, making these 2 lines useless
code.
Benoît Canet [Wed, 5 Mar 2014 22:48:29 +0000 (23:48 +0100)]
block: make bdrv_swap rebuild the bs graph node list field.
Moving only the node_name one field could lead to some inconsitencies where a
node_name was defined on a bs which was not registered in the graph node list.
bdrv_swap between a named node bs and a non named node bs would lead to this.
bdrv_make_anon would then crash because it would try to remove the bs from the
graph node list while it is not in it.
This patch remove named node bses from the graph node list before doing the swap
then insert them back.
Kevin Wolf [Wed, 5 Mar 2014 14:45:00 +0000 (15:45 +0100)]
iscsi: Use bs->sg for everything else than disks
The current iscsi block driver code makes the rather arbitrary decision
that TYPE_MEDIUM_CHANGER and TYPE_TAPE devices have bs->sg = 1 and all
other device types are disks.
Instead of this, check for TYPE_DISK to expose the disk interface and
make everything else bs->sg = 1. In particular, this includes devices
with TYPE_STORAGE_ARRAY, which is what LUN 0 of an iscsi target is.
(See https://bugzilla.redhat.com/show_bug.cgi?id=1067784 for the exact
scenario.)
Bharata B Rao [Wed, 29 Jan 2014 14:29:55 +0000 (19:59 +0530)]
gluster: Change licence to GPLv2+
Pipe handling mechanism in gluster driver was based on similar implementation
in RBD driver and hence had GPLv2 and associated copyright information.
After changing gluster driver to coroutine based implementation, the pipe
handling code no longer exists and hence change gluster driver's licence to
GPLv2+ and remove RBD copyrights.
Dave Airlie [Tue, 10 Dec 2013 04:05:51 +0000 (14:05 +1000)]
ui/sdl2 : initial port to SDL 2.0 (v2.0)
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <[email protected]>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
projects / qemu.git / log