Clean up msix vector usage state on load. Since guest might have control
over it through the device, the device will have to load this state from
file.
Kevin Wolf [Tue, 7 Jul 2009 16:09:42 +0000 (18:09 +0200)]
qcow2: Fix L1 table memory allocation
Contrary to what one could expect, the size of L1 tables is not cluster
aligned. So as we're writing whole sectors now instead of single entries,
we need to ensure that the L1 table in memory is large enough; otherwise
write would access memory after the end of the L1 table.
Mark McLoughlin [Fri, 3 Jul 2009 08:28:02 +0000 (09:28 +0100)]
Prefer sysfs for USB host devices
Scanning for devices via /sys/bus/usb/devices/ and using them via the
/dev/bus/usb/<bus>/<device> character devices is the prefered method
on modern kernels, so try that first.
When using SELinux and libvirt, qemu will have access to /sys/bus/usb
but not /proc/bus/usb, so although the current code will work just
fine, it will generate SELinux AVC warnings.
Add a -g flag to the open command and the main qemu-io command line to
allow opening a file growable. This is only allowed for protocols,
mirroring the limitation exposed through bdrv_file_open.
qemu-io: better input validation for vector-based commands
Fix up a couple of issues with validating the input of the various
length arguments for the vectored I/O commands:
- do the alignment check on each length instead the always 0 count argument
- use a long long varibale for the cvtnum return value so that we can check
wether it wasn't a number
- check for a too large argument instead of truncating it
Also refactor it into a common helper for all four calers and avoid parsing
the numbers twice.
Mark McLoughlin [Wed, 1 Jul 2009 15:46:38 +0000 (16:46 +0100)]
Don't leak VLANClientState on PCI hot remove
destroy_nic() requires that NICInfo::private by a PCIDevice pointer,
but then goes on to require that the same pointer matches
VLANClientState::opaque.
That is no longer the case for virtio-net since qdev and wasn't
previously the case for rtl8139, ne2k_pci or eepro100.
Make the situation a lot more clear by maintaining a VLANClientState
pointer in NICInfo.
Alexander Graf [Wed, 1 Jul 2009 20:08:21 +0000 (22:08 +0200)]
Replace signrom with shell script v3
In order to not execute code we just compiled, let's replace signrom
with a shell script that does the same thing while staying compatible
to pretty much every system available.
This should make cross-compilation for windows easier.
Kevin Wolf [Tue, 30 Jun 2009 11:06:04 +0000 (13:06 +0200)]
qcow2: Make cache=writethrough default
The performance of qcow2 has improved meanwhile, so we don't need to
special-case it any more. Switch the default to write-through caching
like all other block drivers.
Mark McLoughlin [Tue, 30 Jun 2009 09:02:57 +0000 (10:02 +0100)]
net: set a default value for sndbuf=
On reflection, perhaps it does make sense to set a default value for
the sndbuf= tap parameter.
For best effect, sndbuf= should be set to just below the capacity of
the physical NIC.
Setting it higher will cause packets to be dropped before the limit
is hit. Setting it much lower will not cause any problems unless
you set it low enough such that the guest cannot queue up new packets
before the NIC has emptied its queue.
In Linux, txqueuelen=1000 by default for ethernet NICs. Given a 1500
byte MTU, 1Mb is a good choice for sndbuf.
If it turns out that txqueuelen is actually much lower than this, then
sndbuf is essentially disabled. In the event that txqueuelen is much
higher, it's unlikely that the NIC will be able to empty a 1Mb queue.
Huang Ying [Tue, 23 Jun 2009 02:05:14 +0000 (10:05 +0800)]
QEMU: MCE: Add MCE simulation to qemu/tcg
- MCE features are initialized when VCPU is intialized according to CPUID.
- A monitor command "mce" is added to inject a MCE.
- A new interrupt mask: CPU_INTERRUPT_MCE is added to inject the MCE.
Gerd Hoffmann [Tue, 30 Jun 2009 12:12:11 +0000 (14:12 +0200)]
qdev/pci: misc fixes.
* fix secondary bus setup.
* use base->name instead of "FIXME" for device name.
Yes, the device name is redundant. Only for drivers converted
to qdev already though. Once all drivers are converted we can
and should kill it.
Gerd Hoffmann [Tue, 30 Jun 2009 12:12:09 +0000 (14:12 +0200)]
qdev: remove DeviceType
The only purpose DeviceType serves is creating a linked list of
DeviceInfo structs. This removes DeviceType and add a next field to
DeviceInfo instead, so the DeviceInfo structs can be changed that way.
Elimitates a pointless extra level of indirection.
Gerd Hoffmann [Tue, 30 Jun 2009 12:12:08 +0000 (14:12 +0200)]
qdev: replace bus_type enum with bus_info struct.
BusInfo is filled with name and size (pretty much like I did for
DeviceInfo as well). There is also a function pointer to print
bus-specific device information to the monitor. sysbus is hooked
up there, I've also added a print function for PCI.
Device creation is slightly modified as well: The device type search
loop now also checks the bus type while scanning the list instead of
complaining thereafter in case of a mismatch. This effectively gives
each bus a private namespace for device names.
Gerd Hoffmann [Tue, 30 Jun 2009 12:12:07 +0000 (14:12 +0200)]
qdev: update pci device registration.
Makes pci_qdev_register take a PCIDeviceInfo struct instead of a bunch
of parameters. Also adds config_read and config_write callbacks to
PCIDeviceInfo, so drivers needing these can be converted to the qdev
device API too.
vibi sreenivasan [Fri, 19 Jun 2009 08:04:39 +0000 (13:34 +0530)]
linux-user/syscall.c: remove warning: ‘array’ may be used uninitialized in this function
Removes the following warning
CC i386-linux-user/syscall.o
cc1: warnings being treated as errors
/media/nfs/qemu/linux-user/syscall.c: In function ‘do_syscall’:
/media/nfs/qemu/linux-user/syscall.c:2219: warning: ‘array’ may be used uninitialized in this function
Arnaud Patard [Fri, 19 Jun 2009 07:44:45 +0000 (10:44 +0300)]
linux-user: check some parameters for some socket syscalls.
This patch is fixing following issues :
- commit 8fea36025b9d6d360ff3b78f88a84ccf221807e8 was applied to
do_getsockname instead of do_accept.
- Some syscalls were not checking properly the memory addresses passed
as argument
- Add check before syscalls made for cases like do_getpeername() where
we're using the address parameter after doing the syscall
- Fix do_accept to return EINVAL instead of EFAULT when parameters
invalid to match with linux behaviour
Stefan Weil [Wed, 1 Jul 2009 21:13:34 +0000 (23:13 +0200)]
Fix hxtool.
When converting from hx to texi format, hxtool (or to be
more precise sh which interprets hxtool) used standard
shell expansion of wildcards while writing lines to the
output.
Thus, something like "Password: ********"
looked very different in the generated documentation.
The patch disables this unwanted wildcard expansion.
We want to do (at least) two things to the virtio-balloon device:
suppress it, and control its PCI address. Option -no-virtio-balloon
lets us do only the former. To get the latter, replace
-no-virtio-balloon with
Jan Kiszka [Sat, 27 Jun 2009 07:59:40 +0000 (09:59 +0200)]
sdl: Fix memory leakage
Valgrind was so kind to remark that no one bothers to release keycodes
after use and that something is fishy about cleaning up the requested
keyboard descriptor. With this patch applied, we no longer leak about
12k during startup.
Jan Kiszka [Sat, 27 Jun 2009 07:27:22 +0000 (09:27 +0200)]
KVM: x86: Refactor persistent CPU state
This patch aligns the KVM-related layout and encoding of the CPU state
to be saved to disk or migrated with qemu-kvm. The major differences are
reordering of fields and a compressed interrupt_bitmap into a single
number as there can be no more than one pending IRQ at a time.
Jan Kiszka [Thu, 25 Jun 2009 06:23:39 +0000 (08:23 +0200)]
x86: Factor out pc_new_cpu
At this point, this refactoring looks like overkill. But we will need it
for CPU hotplugging, and qemu-kvm already carries it. Merging it early
would help qemu-kvm when rebasing against upstream.
Jan Kiszka [Thu, 25 Jun 2009 06:22:08 +0000 (08:22 +0200)]
monitor: Refactor acl commnds
Refactor the ACL monitor interface to make full use of the monitor
command dispatcher. This also gives proper help formatting and command
completion. Note that 'acl allow' and 'acl deny' were combined to
'acl_add aclname match allow|deny [index]' for consistency reasons.
Jan Kiszka [Sat, 27 Jun 2009 07:25:07 +0000 (09:25 +0200)]
Revert "Introduce reset notifier order"
This reverts commit 8217606e6edb49591b4a6fd5a0d1229cebe470a9 (and
updates later added users of qemu_register_reset), we solved the
problem it originally addressed less invasively.
Jan Kiszka [Sat, 27 Jun 2009 07:24:58 +0000 (09:24 +0200)]
kvm: Rework VCPU synchronization
During startup and after reset we have to synchronize user space to the
in-kernel KVM state. Namely, we need to transfer the VCPU registers when
they change due to VCPU as well as APIC reset.
This patch refactors the required hooks so that kvm_init_vcpu registers
its own per-VCPU reset handler and adds a cpu_synchronize_state to the
APIC reset. That way we no longer depend on the new reset order (and can
drop this disliked interface again) and we can even drop a KVM hook in
main().
Jan Kiszka [Thu, 25 Jun 2009 22:04:00 +0000 (00:04 +0200)]
monitor: Drop pci_addr prefix from hotplug commands
The "pci_addr=" prefix currently required by pci_add/remove and
drive_add has no practical use. Drop it, but still silently accept it
for backward compatibility.
Kevin Wolf [Fri, 26 Jun 2009 18:19:38 +0000 (20:19 +0200)]
qcow2: Cache refcount blocks during snapshot creation
The really time consuming part of snapshotting is to adjust the reference count
of all clusters. Currently after each adjusted cluster the refcount block is
written to disk.
Don't write each single byte immediately to disk but cache all writes to the
refcount block and write them out once we're done with the block.
Kevin Wolf [Fri, 26 Jun 2009 17:51:24 +0000 (19:51 +0200)]
block-raw: Allow pread beyond the end of growable images
When using O_DIRECT, qcow2 snapshots didn't work any more for me. In the
process of creating the snapshot, qcow2 tries to pwrite some new information
(e.g. new L1 table) which will often end up being after the old end of the
image file. Now pwrite tries to align things and reads the old contents of the
file, read returns 0 because there is nothing to read after the end of file and
pwrite is stuck in an endless loop.
This patch allows to pread beyond the end of an image file. Whenever the
given offset is after the end of the image file, the read succeeds and fills
the buffer with zeros.
projects / qemu.git / log