Lingfeng Yang [Fri, 12 Jun 2020 19:02:23 +0000 (20:02 +0100)]
configure: add --enable-tsan flag + fiber annotations for coroutine-ucontext
We tried running QEMU under tsan in 2016, but tsan's lack of support for
longjmp-based fibers was a blocker:
https://groups.google.com/forum/#!topic/thread-sanitizer/se0YuzfWazw
Fortunately, thread sanitizer gained fiber support in early 2019:
https://reviews.llvm.org/D54889
This patch brings tsan support upstream by importing the patch that annotated
QEMU's coroutines as tsan fibers in Android's QEMU fork:
https://android-review.googlesource.com/c/platform/external/qemu/+/844675
Tested with '--enable-tsan --cc=clang-9 --cxx=clang++-9 --disable-werror'
configure flags.
Claudio Fontana [Fri, 12 Jun 2020 19:02:21 +0000 (20:02 +0100)]
Makefile: dtc: update, build the libfdt target
dtc submodule update, now call the libfdt target from the new
dtc Makefile, which has been changed to not require bison, flex, etc.
This removes warnings during the build.
scripts/ symlink and tests directory creation are not necessary,
and neither is calling the clean rule explicitly.
Peter Maydell [Tue, 16 Jun 2020 09:06:57 +0000 (10:06 +0100)]
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-06-16' into staging
* Latest fuzzer patches from Alexander
* Fixes for the qtest bios-tables-test
* LGPL information cleanup in qtest code
* sh4 acceptance test
* Improved submodule handling for the s390x CI test
This patch transfers sh4 sections to Yoshinori Sato, who is
best positioned in the community to assume sh4 maintainership.
He is the maintainer of the related target rx as well, which
means that some synergy between the two targets can be expected
in future.
Further adjustments, reorganizations, and improvements of sh4
sections are left to the future maintainer to be devised and
executed, as he deems suitable.
Aurelien and Magnus are deleted as maintainers in some sections
of the MAINTAINERS file with this patch. However, they will not
be deleted from QEMU Hall of Fame, where their names will always
remained carved in stone as QEMU pioneers and granddaddies.
Jiaxun Yang [Sun, 14 Jun 2020 08:00:46 +0000 (16:00 +0800)]
target/mips: Legalize Loongson insn flags
To match the actual status of Loongson insn, we split flags
for LMMI and LEXT from INSN_LOONGSON2F.
As Loongson-2F only implemented interger part of LEXT, we'll
not enable LEXT for the processor, but instead we're still using
INSN_LOONGSON2F as switch flag of these instructions.
All multimedia instructions have been moved to LMMI flag. Loongson-2F
and Loongson-3A are sharing these instructions.
Thomas Huth [Tue, 11 Feb 2020 08:59:41 +0000 (09:59 +0100)]
tests/acceptance: Add boot tests for sh4 QEMU advent calendar image
Now that we can select the second serial console in the acceptance tests
(see commit 746f244d9720 "Allow to use other serial consoles than default"),
we can also test the sh4 image from the QEMU advent calendar 2018.
Thomas Huth [Fri, 5 Jun 2020 10:02:42 +0000 (12:02 +0200)]
tests/qtest: Fix LGPL information in the file headers
It's either "GNU *Library* General Public License version 2" or "GNU
Lesser General Public License version *2.1*", but there was no "version
2.0" of the "Lesser" license. So assume that version 2.1 is meant here.
It is neater to keep this in the QEMU repo, since any change that
requires an update to the oss-fuzz build configuration, can make the
necessary changes in the same series.
The QTest server usually parses ASCII commands from clients. Since we
fuzz within the QEMU process, skip the QTest serialization and server
for most QTest commands. Leave the option to use the ASCII protocol, to
generate readable traces for crash reproducers.
Peter Maydell [Mon, 15 Jun 2020 15:36:34 +0000 (16:36 +0100)]
Merge remote-tracking branch 'remotes/berrange/tags/qcrypto-next-pull-request' into staging
Misc crypto subsystem fixes
* Improve error message for large files when creating LUKS volumes
* Expand crypto hash benchmark coverage
* Misc code refactoring with no functional change
# gpg: Signature made Mon 15 Jun 2020 11:35:17 BST
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <[email protected]>" [full]
# gpg: aka "Daniel P. Berrange <[email protected]>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/qcrypto-next-pull-request:
crypto: Remove use of GCRYPT_VERSION macro.
test-crypto-secret: add 'secret_keyring' object tests.
crypto/linux_keyring: add 'secret_keyring' secret object.
crypto/secret: move main logic from 'secret' to 'secret_common'.
crypto: add "none" random provider
According to the gcrypt documentation it's intended that
gcry_check_version() is called with the minimum version of gcrypt
needed by the program, not the version from the <gcrypt.h> header file
that happened to be installed when qemu was compiled. Indeed the
gcrypt.h header says that you shouldn't use the GCRYPT_VERSION macro.
This causes the following failure:
qemu-img: Unable to initialize gcrypt
if a slightly older version of libgcrypt is installed with a newer
qemu, even though the slightly older version works fine. This can
happen with RPM packaging which uses symbol versioning to determine
automatically which libgcrypt is required by qemu, which caused the
following bug in RHEL 8:
qemu actually requires libgcrypt >= 1.5.0, so we might put the string
"1.5.0" here. However since 1.5.0 was released in 2011, it hardly
seems we need to check that. So I replaced GCRYPT_VERSION with NULL.
Perhaps in future if we move to requiring a newer version of gcrypt we
could put a literal string here.
Add the ability for the secret object to obtain secret data from the
Linux in-kernel key managment and retention facility, as an extra option
to the existing ones: reading from a file or passing directly as a
string.
The secret is identified by the key serial number. The upper layers
need to instantiate the key and make sure the QEMU process has access
permissions to read it.
Signed-off-by: Alexey Krasikov <[email protected]>
- Fixed up detection logic default behaviour in configure
Alexey Krasikov [Mon, 25 May 2020 11:16:53 +0000 (14:16 +0300)]
crypto/secret: move main logic from 'secret' to 'secret_common'.
Create base class 'common secret'. Move common data and logic from
'secret' to 'common_secret' class. This allowed adding abstraction layer
for easier adding new 'secret' objects in future.
Convert 'secret' class to child from basic 'secret_common' with 'data'
and 'file' properties.
In case of not using random-number needing feature, it makes sense to
skip RNG init too. This is especially helpful when QEMU is sandboxed in
Stubdomain under Xen, where there is very little entropy so initial
getrandom() call delays the startup several seconds. In that setup, no
random bytes are needed at all.
Thomas Huth [Thu, 11 Jun 2020 17:24:45 +0000 (19:24 +0200)]
target/i386: Remove obsolete TODO file
The last real change to this file is from 2012, so it is very likely
that this file is completely out-of-date and ignored today. Let's
simply remove it to avoid confusion if someone finds it by accident.
Pavel Dovgalyuk [Fri, 22 May 2020 06:45:54 +0000 (09:45 +0300)]
replay: fix replay shutdown for console mode
When QEMU is used without any graphical window,
QEMU execution is terminated with the signal (e.g., Ctrl-C).
Signal processing in QEMU does not include
qemu_system_shutdown_request call. That is why shutdown
event is not recorded by record/replay in this case.
This patch adds shutdown event to the end of the record log.
Now every replay will shutdown the machine at the end.
exec/cpu-common: Move MUSB specific typedefs to 'hw/usb/hcd-musb.h'
The CPUReadMemoryFunc/CPUWriteMemoryFunc typedefs are legacy
remnant from before the conversion to MemoryRegions.
Since they are now only used in tusb6010.c and hcd-musb.c,
move them to "hw/usb/musb.h" and rename them appropriately.
David Gibson [Thu, 4 Jun 2020 06:42:19 +0000 (16:42 +1000)]
target/i386: sev: Unify SEVState and SevGuestState
SEVState is contained with SevGuestState. We've now fixed redundancies
and name conflicts, so there's no real point to the nested structure. Just
move all the fields of SEVState into SevGuestState.
This eliminates the SEVState structure, which as a bonus removes the
confusion with the SevState enum.
David Gibson [Thu, 4 Jun 2020 06:42:18 +0000 (16:42 +1000)]
target/i386: sev: Remove redundant handle field
The user can explicitly specify a handle via the "handle" property wired
to SevGuestState::handle. That gets passed to the KVM_SEV_LAUNCH_START
ioctl() which may update it, the final value being copied back to both
SevGuestState::handle and SEVState::handle.
AFAICT, nothing will be looking SEVState::handle before it and
SevGuestState::handle have been updated from the ioctl(). So, remove the
field and just use SevGuestState::handle directly.
David Gibson [Thu, 4 Jun 2020 06:42:17 +0000 (16:42 +1000)]
target/i386: sev: Remove redundant policy field
SEVState::policy is set from the final value of the policy field in the
parameter structure for the KVM_SEV_LAUNCH_START ioctl(). But, AFAICT
that ioctl() won't ever change it from the original supplied value which
comes from SevGuestState::policy.
So, remove this field and just use SevGuestState::policy directly.
David Gibson [Thu, 4 Jun 2020 06:42:16 +0000 (16:42 +1000)]
target/i386: sev: Remove redundant cbitpos and reduced_phys_bits fields
The SEVState structure has cbitpos and reduced_phys_bits fields which are
simply copied from the SevGuestState structure and never changed. Now that
SEVState is embedded in SevGuestState we can just access the original copy
directly.
David Gibson [Thu, 4 Jun 2020 06:42:15 +0000 (16:42 +1000)]
target/i386: sev: Partial cleanup to sev_state global
The SEV code uses a pretty ugly global to access its internal state. Now
that SEVState is embedded in SevGuestState, we can avoid accessing it via
the global in some cases. In the remaining cases use a new global
referencing the containing SevGuestState which will simplify some future
transformations.
David Gibson [Thu, 4 Jun 2020 06:42:13 +0000 (16:42 +1000)]
target/i386: sev: Rename QSevGuestInfo
At the moment this is a purely passive object which is just a container for
information used elsewhere, hence the name. I'm going to change that
though, so as a preliminary rename it to SevGuestState.
That name risks confusion with both SEVState and SevState, but I'll be
working on that in following patches.
David Gibson [Thu, 4 Jun 2020 06:42:12 +0000 (16:42 +1000)]
target/i386: sev: Move local structure definitions into .c file
Neither QSevGuestInfo nor SEVState (not to be confused with SevState) is
used anywhere outside target/i386/sev.c, so they might as well live in
there rather than in a (somewhat) exposed header.
Anthony PERARD [Wed, 3 Jun 2020 16:04:42 +0000 (17:04 +0100)]
xen: fix build without pci passthrough
Xen PCI passthrough support may not be available and thus the global
variable "has_igd_gfx_passthru" might be compiled out. Common code
should not access it in that case.
Unfortunately, we can't use CONFIG_XEN_PCI_PASSTHROUGH directly in
xen-common.c so this patch instead move access to the
has_igd_gfx_passthru variable via function and those functions are
also implemented as stubs. The stubs will be used when QEMU is built
without passthrough support.
Now, when one will want to enable igd-passthru via the -machine
property, they will get an error message if QEMU is built without
passthrough support.
Roman Bolshakov [Thu, 28 May 2020 19:37:52 +0000 (22:37 +0300)]
i386: hvf: Drop fetch_rip from HVFX86EmulatorState
The field is used to print address of instructions that have no parser
in decode_invalid(). RIP from VMCS is saved into fetch_rip before
decoding starts but it's also saved into env->eip in load_regs().
Therefore env->eip can be used instead of fetch_rip.
While at it, correct address printed in decode_invalid(). It prints an
address before the unknown instruction.
Roman Bolshakov [Thu, 28 May 2020 19:37:46 +0000 (22:37 +0300)]
i386: hvf: Move HVFState definition into hvf
"sysemu/hvf.h" is intended for inclusion in generic code. However it
also contains several hvf definitions and declarations, including
HVFState that are used only inside "hvf.c". "hvf-i386.h" would be more
appropriate place to define HVFState as it's only included by "hvf.c"
and "x86_task.c".
Joseph Myers [Fri, 12 Jun 2020 13:45:23 +0000 (13:45 +0000)]
target/i386: correct fix for pcmpxstrx substring search
This corrects a bug introduced in my previous fix for SSE4.2 pcmpestri
/ pcmpestrm / pcmpistri / pcmpistrm substring search, commit ae35eea7e4a9f21dd147406dfbcd0c4c6aaf2a60.
That commit fixed a bug that showed up in four GCC tests with one libc
implementation. The tests in question generate random inputs to the
intrinsics and compare results to a C implementation, but they only
test 1024 possible random inputs, and when the tests use the cases of
those instructions that work with word rather than byte inputs, it's
easy to have problematic cases that show up much less frequently than
that. Thus, testing with a different libc implementation, and so a
different random number generator, showed up a problem with the
previous patch.
When investigating the previous test failures, I found the description
of these instructions in the Intel manuals (starting from computing a
16x16 or 8x8 set of comparison results) confusing and hard to match up
with the more optimized implementation in QEMU, and referred to AMD
manuals which described the instructions in a different way. Those
AMD descriptions are very explicit that the whole of the string being
searched for must be found in the other operand, not running off the
end of that operand; they say "If the prototype and the SUT are equal
in length, the two strings must be identical for the comparison to be
TRUE.". However, that statement is incorrect.
In my previous commit message, I noted:
The operation in this case is a search for a string (argument d to
the helper) in another string (argument s to the helper); if a copy
of d at a particular position would run off the end of s, the
resulting output bit should be 0 whether or not the strings match in
the region where they overlap, but the QEMU implementation was
wrongly comparing only up to the point where s ends and counting it
as a match if an initial segment of d matched a terminal segment of
s. Here, "run off the end of s" means that some byte of d would
overlap some byte outside of s; thus, if d has zero length, it is
considered to match everywhere, including after the end of s.
The description "some byte of d would overlap some byte outside of s"
is accurate only when understood to refer to overlapping some byte
*within the 16-byte operand* but at or after the zero terminator; it
is valid to run over the end of s if the end of s is the end of the
16-byte operand. So the fix in the previous patch for the case of d
being empty was correct, but the other part of that patch was not
correct (as it never allowed partial matches even at the end of the
16-byte operand). Nor was the code before the previous patch correct
for the case of d nonempty, as it would always have allowed partial
matches at the end of s.
Fix with a partial revert of my previous change, combined with
inserting a check for the special case of s having maximum length to
determine where it is necessary to check for matches.
In the added test, test 1 is for the case of empty strings, which
failed before my 2017 patch, test 2 is for the bug introduced by my
2017 patch and test 3 deals with the case where a match of an initial
segment at the end of the string is not valid when the string ends
before the end of the 16-byte operand (that is, the case that would be
broken by a simple revert of the non-empty-string part of my 2017
patch).
Peter Maydell [Fri, 12 Jun 2020 14:53:49 +0000 (15:53 +0100)]
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio,acpi,pci: features, fixes, cleanups, tests
Max slots negotiation for vhost-user.
Free page reporting for balloon.
Partial TPM2 ACPI support for ARM.
Support for NVDIMMs having their own proximity domains.
New vhost-user-vsock device.
Fixes, cleanups in ACPI, PCI, virtio.
New tests for TPM ACPI.
Signed-off-by: Michael S. Tsirkin <[email protected]>
# gpg: Signature made Fri 12 Jun 2020 15:18:04 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "[email protected]"
# gpg: Good signature from "Michael S. Tsirkin <[email protected]>" [full]
# gpg: aka "Michael S. Tsirkin <[email protected]>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (58 commits)
virtio-pci: fix queue_enable write
pci: Display PCI IRQ pin in "info pci"
Fix parameter type in vhost migration log path
acpi: ged: rename event memory region
acpi: fadt: add hw-reduced sleep register support
acpi: madt: skip pci override on pci-less systems.
acpi: create acpi-common.c and move madt code
acpi: make build_madt() more generic.
virtio: add vhost-user-vsock-pci device
virtio: add vhost-user-vsock base device
vhost-vsock: add vhost-vsock-common abstraction
hw/pci: Fix crash when running QEMU with "-nic model=rocker"
libvhost-user: advertise vring features
Lift max ram slots limit in libvhost-user
Support individual region unmap in libvhost-user
Support adding individual regions in libvhost-user
Support ram slot configuration in libvhost-user
Refactor out libvhost-user fault generation logic
Lift max memory slots limit imposed by vhost-user
Transmit vhost-user memory regions individually
...
Peter Xu [Tue, 17 Mar 2020 19:59:08 +0000 (15:59 -0400)]
pci: Display PCI IRQ pin in "info pci"
Sometimes it would be good to be able to read the pin number along
with the IRQ number allocated. Since we'll dump the IRQ number, no
reason to not dump the pin information. For example, the vfio-pci
device will overwrite the pin with the hardware pin number. It would
be nice to know the pin number of one assigned device from QMP/HMP.
Raphael Norwitz [Thu, 7 May 2020 21:37:58 +0000 (17:37 -0400)]
Fix parameter type in vhost migration log path
The ‘enable’ parameter to the vhost_migration_log() function is given as
an int, but "true"/"false" values are passed in wherever it is invoked.
Inside the function itself it is only ever compared with bool values.
Therefore the parameter value itself should be changed to bool.
Signed-off-by: Raphael Norwitz <[email protected]>
Message-Id: <CAFubqFtqNZw=Y-ar3N=3zTQi6LkKg_G-7W7OOHHbE7Y1fV7HAQ@mail.gmail.com> Reviewed-by: Eric Blake <[email protected]> Reviewed-by: Michael S. Tsirkin <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>
This patch prepares the introduction of vhost-user-vsock, moving
the common code usable for both vhost-vsock and vhost-user-vsock
devices, in the new vhost-vsock-common parent class.
While moving the code, fixed checkpatch warnings about block comments.
Thomas Huth [Wed, 27 May 2020 15:31:52 +0000 (17:31 +0200)]
hw/pci: Fix crash when running QEMU with "-nic model=rocker"
QEMU currently aborts when being started with "-nic model=rocker" or with
"-net nic,model=rocker". This happens because the "rocker" device is not
a normal NIC but a switch, which has different properties. Thus we should
only consider real NIC devices for "-nic" and "-net". These devices can
be identified by the "netdev" property, so check for this property before
adding the device to the list.
Stefan Hajnoczi [Fri, 29 May 2020 16:13:38 +0000 (17:13 +0100)]
libvhost-user: advertise vring features
libvhost-user implements several vring features without advertising
them. There is no way for the vhost-user master to detect support for
these features.
Things more or less work today because QEMU assumes the vhost-user
backend always implements certain feature bits like
VIRTIO_RING_F_EVENT_IDX. This is not documented anywhere.
This patch explicitly advertises features implemented in libvhost-user
so that the vhost-user master does not need to make undocumented
assumptions.
Feature bits that libvhost-user now advertises can be removed from
vhost-user-blk.c. Devices should not be responsible for advertising
vring feature bits, that is libvhost-user's job.
Raphael Norwitz [Thu, 21 May 2020 05:00:59 +0000 (05:00 +0000)]
Lift max ram slots limit in libvhost-user
Historically, VMs with vhost-user devices could hot-add memory a maximum
of 8 times. Now that the VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS
protocol feature has been added, VMs with vhost-user backends which
support this new feature can support a configurable number of ram slots
up to the maximum supported by the target platform.
This change adds VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS support for
backends built with libvhost-user, and increases the number of supported
ram slots from 8 to 32.
Memory hot-add, hot-remove and postcopy migration were tested with
the vhost-user-bridge sample.
Raphael Norwitz [Thu, 21 May 2020 05:00:56 +0000 (05:00 +0000)]
Support individual region unmap in libvhost-user
When the VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS protocol feature is
enabled, on memory hot-unplug qemu will transmit memory regions to
remove individually using the new message VHOST_USER_REM_MEM_REG
message. With this change, vhost-user backends build with libvhost-user
can now unmap individual memory regions when receiving the
VHOST_USER_REM_MEM_REG message.
Qemu only sends VHOST_USER_REM_MEM_REG messages when the
VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS feature is negotiated, and
support for that feature has not yet been added in libvhost-user, this
new functionality is not yet used.
Raphael Norwitz [Thu, 21 May 2020 05:00:52 +0000 (05:00 +0000)]
Support adding individual regions in libvhost-user
When the VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS is enabled, qemu will
transmit memory regions to a backend individually using the new message
VHOST_USER_ADD_MEM_REG. With this change vhost-user backends built with
libvhost-user can now map in new memory regions when VHOST_USER_ADD_MEM_REG
messages are received.
Qemu only sends VHOST_USER_ADD_MEM_REG messages when the
VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS feature is negotiated, and
since it is not yet supported in libvhost-user, this new functionality
is not yet used.
Raphael Norwitz [Thu, 21 May 2020 05:00:50 +0000 (05:00 +0000)]
Support ram slot configuration in libvhost-user
The VHOST_USER_GET_MAX_MEM_SLOTS message allows a vhost-user backend to
specify a maximum number of ram slots it is willing to support. This
change adds support for libvhost-user to process this message. For now
the backend will reply with 8 as the maximum number of regions
supported.
libvhost-user does not yet support the vhost-user protocol feature
VHOST_USER_PROTOCOL_F_CONFIGIRE_MEM_SLOTS, so qemu should never
send the VHOST_USER_GET_MAX_MEM_SLOTS message. Therefore this new
functionality is not currently used.
Raphael Norwitz [Thu, 21 May 2020 05:00:47 +0000 (05:00 +0000)]
Refactor out libvhost-user fault generation logic
In libvhost-user, the incoming postcopy migration path for setting the
backend's memory tables has become convolued. In particular, moving the
logic which starts generating faults, having received the final ACK from
qemu can be moved to a separate function. This simplifies the code
substantially.
This logic will also be needed by the postcopy path once the
VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS feature is supported.
Raphael Norwitz [Thu, 21 May 2020 05:00:40 +0000 (05:00 +0000)]
Lift max memory slots limit imposed by vhost-user
Historically, sending all memory regions to vhost-user backends in a
single message imposed a limitation on the number of times memory
could be hot-added to a VM with a vhost-user device. Now that backends
which support the VHOST_USER_PROTOCOL_F_CONFIGURE_SLOTS send memory
regions individually, we no longer need to impose this limitation on
devices which support this feature.
With this change, VMs with a vhost-user device which supports the
VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS can support a configurable
number of memory slots, up to the maximum allowed by the target
platform.
Existing backends which do not support
VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS are unaffected.
Raphael Norwitz [Thu, 21 May 2020 05:00:35 +0000 (05:00 +0000)]
Transmit vhost-user memory regions individually
With this change, when the VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS
protocol feature has been negotiated, Qemu no longer sends the backend
all the memory regions in a single message. Rather, when the memory
tables are set or updated, a series of VHOST_USER_ADD_MEM_REG and
VHOST_USER_REM_MEM_REG messages are sent to transmit the regions to map
and/or unmap instead of sending send all the regions in one fixed size
VHOST_USER_SET_MEM_TABLE message.
The vhost_user struct maintains a shadow state of the VM’s memory
regions. When the memory tables are modified, the
vhost_user_set_mem_table() function compares the new device memory state
to the shadow state and only sends regions which need to be unmapped or
mapped in. The regions which must be unmapped are sent first, followed
by the new regions to be mapped in. After all the messages have been
sent, the shadow state is set to the current virtual device state.
Existing backends which do not support
VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS are unaffected.
Raphael Norwitz [Thu, 21 May 2020 05:00:32 +0000 (05:00 +0000)]
Add VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS
This change introduces a new feature to the vhost-user protocol allowing
a backend device to specify the maximum number of ram slots it supports.
At this point, the value returned by the backend will be capped at the
maximum number of ram slots which can be supported by vhost-user, which
is currently set to 8 because of underlying protocol limitations.
The returned value will be stored inside the VhostUserState struct so
that on device reconnect we can verify that the ram slot limitation
has not decreased since the last time the device connected.
Peter Maydell [Thu, 11 Jun 2020 20:19:29 +0000 (21:19 +0100)]
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2020-06-09-v2' into staging
NBD patches for 2020-06-09
- fix iotest 194 race
- fix CVE-2020-10761: server DoS from assertion on long NBD error messages
# gpg: Signature made Wed 10 Jun 2020 18:59:19 BST
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <[email protected]>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <[email protected]>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2020-06-09-v2:
block: Call attention to truncation of long NBD exports
nbd/server: Avoid long error message assertions CVE-2020-10761
iotests: 194: wait for migration completion on target too
Convert DPRINTF() to traces or qemu_logs
Use IEC binary prefix definitions
Use qemu_semihosting_log_out() in target/unicore32
Some code and doc cleanup
* remotes/vivier2/tags/trivial-branch-for-5.1-pull-request:
semihosting: remove the pthread include which seems unused
hw/openrisc/openrisc_sim: Add assertion to silence GCC warning
target/unicore32: Prefer qemu_semihosting_log_out() over curses
target/unicore32: Replace DPRINTF() by qemu_log_mask(GUEST_ERROR)
target/unicore32: Remove unused headers
target/i386/cpu: Use the IEC binary prefix definitions
hw/i386/xen/xen-hvm: Use the IEC binary prefix definitions
hw/hppa/dino: Use the IEC binary prefix definitions
hw/arm/aspeed: Correct DRAM container region size
qemu-img: Fix doc typo for 'bitmap' subcommand
hw/misc/auxbus: Use qemu_log_mask(UNIMP) instead of debug printf
hw/isa/apm: Convert debug printf()s to trace events
hw/unicore32/puv3: Use qemu_log_mask(ERROR) instead of debug printf()
.mailmap: Update Fred Konrad email address
net: Do not include a newline in the id of -nic devices
Fix parameter type in vhost migration log path
Signed-off-by: Peter Maydell <[email protected]>
# Conflicts:
# .mailmap
projects / qemu.git / log