Mark Cave-Ayland [Sat, 14 Oct 2017 12:22:22 +0000 (13:22 +0100)]
sparc32_dma: remove is_ledma hack and replace with memory region alias
This hack originated from before the memory region API was introduced, and
increased the size of the ledma DMA device to capture incorrect accesses
beyond the end of the ledma device. A full analysis can be found on Artyom's
blog at http://tyom.blogspot.co.uk/2010/10/bug-in-all-solaris-versions-after-57.html.
With the memory API we can now simply alias the incorrect access onto its
intended destination allowing us to remove the hack.
Mark Cave-Ayland [Sat, 14 Oct 2017 12:22:22 +0000 (13:22 +0100)]
sparc32_dma: introduce new SPARC32_DMA type container object
Create a new SPARC32_DMA container object (including an appropriate container
memory region) and add instances of the SPARC32_ESPDMA_DEVICE and
SPARC32_LEDMA_DEVICE as child objects. The benefit is that most of the gpio
wiring complexity between esp/espdma and lance/ledma is now hidden within the
SPARC32_DMA realize function.
Since the sun4m IOMMU is already QOMified we can find a reference to
it using object_resolve_path_type() allowing us to completely remove all external
references to the iommu pointer.
Finally we rework sun4m's sparc32_dma_init() to invoke the new SPARC32_DMA object
and wire up the remaining board memory regions/IRQs.
Mark Cave-Ayland [Sat, 14 Oct 2017 12:22:22 +0000 (13:22 +0100)]
lance: move TYPE_LANCE and SysBusPCNetState from lance.c to lance.h
This enables them to be used outside of lance.c. We also update the comment to
refer to the SPARC32 lance device rather than the AMD PCNet-II device (of which
lance is a register-compatible subset).
Mark Cave-Ayland [Sat, 14 Oct 2017 12:22:22 +0000 (13:22 +0100)]
sparc32_dma: make esp device child of espdma device
This makes it possible to reference the esp device from the espdma device as
required, and by wiring up the device ourselves in sun4m.c we can drop use
of the esp_init() function.
Mark Cave-Ayland [Sat, 14 Oct 2017 12:22:21 +0000 (13:22 +0100)]
sparc32_dma: use object link instead of qdev property to pass IOMMU reference
This enables us to remove the last remaining (opaque) qdev property. Whilst we
are here, also update iommu_init() to use TYPE_SUN4M_IOMMU instead of a
hardcoded string.
Mark Cave-Ayland [Sat, 14 Oct 2017 12:22:21 +0000 (13:22 +0100)]
sun4m: move DMA device wiring from sparc32_dma_init() to sun4m_hw_init()
By using the sysbus interface it is possible to wire up the esp/le devices
to the sun4m DMA controller directly during sun4m_hw_init() instead of
passing qemu_irqs into the sparc32_dma_init() function.
This is an intermediate step to allow further reorganisation as more logic
is moved into the relevant SPARC32 DMA devices; there will be a final
refactoring of sparc32_dma_init() once this work is complete.
Mark Cave-Ayland [Sat, 14 Oct 2017 12:22:21 +0000 (13:22 +0100)]
sparc32_dma: split esp and le into separate DMA devices
Due to slight differences in behaviour accessing the registers for the
esp and le devices, create two separate SPARC32_DMA_DEVICE types and
update the sun4m machine to use.
Note that by using different device types we already know the size of
the register block and the value of is_ledma at init time, allowing us to
drop the SPARC32_DMA_DEVICE realize function and the is_ledma device
property.
Mark Cave-Ayland [Sat, 14 Oct 2017 12:22:21 +0000 (13:22 +0100)]
sparc32_dma: rename SPARC32_DMA type to SPARC32_DMA_DEVICE
Also update the function names to match as appropriate. While we're
here rename the type from sparc32_dma to sparc32-dma in order to
match the current QOM convention.
Peter Maydell [Tue, 31 Oct 2017 14:28:25 +0000 (14:28 +0000)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20171031' into staging
target-arm queue:
* fix instruction-length bit in syndrome for WFI/WFE traps
* xlnx-zcu102: Specify the max number of CPUs
* msf2: Remove dead code reported by Coverity
* msf2: Wire up SYSRESETREQ in SoC for system reset
* hw/pci-host/gpex: Improve INTX to gsi routing error checking
* remotes/pmaydell/tags/pull-target-arm-20171031:
hw/pci-host/gpex: Improve INTX to gsi routing error checking
msf2: Wire up SYSRESETREQ in SoC for system reset
msf2: Remove dead code reported by Coverity
xlnx-zcu102: Specify the max number of CPUs
fix WFI/WFE length in syndrome register
Peter Maydell [Tue, 31 Oct 2017 13:12:21 +0000 (13:12 +0000)]
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2017-10-30' into staging
nbd patches for 2017-10-30
Vladimir Sementsov-Ogievskiy (some patches co-authored by Eric Blake):
00/12 nbd minimal structured read
# gpg: Signature made Mon 30 Oct 2017 20:54:54 GMT
# gpg: using RSA key 0xA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <[email protected]>"
# gpg: aka "Eric Blake (Free Software Programmer) <[email protected]>"
# gpg: aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2017-10-30:
nbd: Minimal structured read for client
nbd: Move nbd_read() to common header
nbd/client: prepare nbd_receive_reply for structured reply
nbd/client: refactor nbd_receive_starttls
nbd/server: Include human-readable message in structured errors
nbd: Minimal structured read for server
nbd/server: Refactor zero-length option check
nbd/server: Simplify nbd_negotiate_options loop
nbd/server: Report error for write to read-only export
nbd: Expose constants and structs for structured read
nbd: Move nbd_errno_to_system_errno() to public header
nbd: Include error names in trace messages
Eric Auger [Tue, 31 Oct 2017 11:50:52 +0000 (11:50 +0000)]
hw/pci-host/gpex: Improve INTX to gsi routing error checking
We exposed gpex_set_irq_num() for machines to set the INTx to
GSI routing. However if the machine forgets to call that
function we currently do not check the association was properly
done. Let's initialize gsi values to -1 and if this value is
found in gpex_route_intx_pin_to_irq, set the routing mode as
disabled.
WFI/E are often, but not always, 4 bytes long. When they are, we need to
set ARM_EL_IL_SHIFT in the syndrome register.
Pass the instruction length to HELPER(wfi), use it to decrement pc
appropriately and to pass an is_16bit flag to syn_wfx, which sets
ARM_EL_IL_SHIFT if needed.
Set dc->insn in both arm_tr_translate_insn and thumb_tr_translate_insn.
Signed-off-by: Stefano Stabellini <[email protected]>
Message-id: alpine.DEB.2.10.1710241055160.574@sstabellini-ThinkPad-X260
[PMM: move setting of dc->insn for Thumb so it is correct for 32 bit insns] Reviewed-by: Peter Maydell <[email protected]> Signed-off-by: Peter Maydell <[email protected]>
Minimal implementation: for structured error only error_report error
message.
Note that test 83 is now more verbose, because the implementation
prints more warnings about unexpected communication errors; perhaps
future patches should tone things down by using trace messages
instead of traces, but the common case of successful communication
is no noisier than before.
Eric Blake [Fri, 27 Oct 2017 10:40:36 +0000 (12:40 +0200)]
nbd: Move nbd_read() to common header
An upcoming change to block/nbd-client.c will want to read the
tail of a structured reply chunk directly from the wire. Move
this function to make it easier.
Based on a patch from Vladimir Sementsov-Ogievskiy.
nbd/client: prepare nbd_receive_reply for structured reply
In following patch nbd_receive_reply will be used both for simple
and structured reply header receiving.
NBDReply is altered into union of simple reply header and structured
reply chunk header, simple error translation moved to block/nbd-client
to be consistent with further structured reply error translation.
Eric Blake [Fri, 27 Oct 2017 10:40:33 +0000 (12:40 +0200)]
nbd/server: Include human-readable message in structured errors
The NBD spec permits including a human-readable error string if
structured replies are in force, so we might as well send the
client the message that we logged on any error.
Minimal implementation of structured read: one structured reply chunk,
no segmentation.
Minimal structured error implementation: no text message.
Support DF flag, but just ignore it, as there is no segmentation any
way.
Eric Blake [Fri, 27 Oct 2017 10:40:31 +0000 (12:40 +0200)]
nbd/server: Refactor zero-length option check
Consolidate the response for a non-zero-length option payload
into a new function, nbd_reject_length(). This check will
also be used when introducing support for structured replies.
Note that STARTTLS response differs based on time: if the connection
is still unencrypted, we set fatal to true (a client that can't
request TLS correctly may still think that we are ready to start
the TLS handshake, so we must disconnect); while if the connection
is already encrypted, the client is sending a bogus request but
is no longer at risk of being confused by continuing the connection.
Eric Blake [Fri, 27 Oct 2017 10:40:29 +0000 (12:40 +0200)]
nbd/server: Report error for write to read-only export
When the server is read-only, we were already reporting an error
message for NBD_CMD_WRITE_ZEROES, but failed to set errp for a
similar NBD_CMD_WRITE. This will matter more once structured
replies allow the server to propagate the errp information back
to the client. While at it, use an error message that makes a
bit more sense if viewed on the client side.
Note that when using qemu-io to test qemu-nbd behavior, it is
rather difficult to convince qemu-io to send protocol violations
(such as a read beyond bounds), because we have a lot of active
checking on the client side that a qemu-io request makes sense
before it ever goes over the wire to the server. The case of a
client attempting a write when the server is started as
'qemu-nbd -r' is one of the few places where we can easily test
error path handling, without having to resort to hacking in known
temporary bugs to either the server or client. [Maybe we want a
future patch to the client to do up-front checking on writes to a
read-only export, the way it does up-front bounds checking; but I
don't see anything in the NBD spec that points to a protocol
violation in our current behavior.]
Eric Blake [Fri, 27 Oct 2017 10:40:28 +0000 (12:40 +0200)]
nbd: Expose constants and structs for structured read
Upcoming patches will implement the NBD structured reply
extension [1] for both client and server roles. Declare the
constants, structs, and lookup routines that will be valuable
whether the server or client code is backported in isolation.
This includes moving one constant from an internal header to
the public header, as part of the structured read processing
will be done in block/nbd-client.c rather than nbd/client.c.
Eric Blake [Fri, 27 Oct 2017 10:40:27 +0000 (12:40 +0200)]
nbd: Move nbd_errno_to_system_errno() to public header
This is needed in preparation for structured reply handling,
as we will be performing the translation from NBD error to
system errno value higher in the stack at block/nbd-client.c.
Eric Blake [Fri, 27 Oct 2017 10:40:26 +0000 (12:40 +0200)]
nbd: Include error names in trace messages
NBD errors were originally sent over the wire based on Linux errno
values; but not all the world is Linux, and not all platforms share
the same values. Since a number isn't very easy to decipher on all
platforms, update the trace messages to include the name of NBD
errors being sent/received over the wire. Tweak the trace messages
to be at the point where we are using the NBD error, not the
translation to the host errno values.
Greg Kurz [Tue, 17 Oct 2017 08:16:22 +0000 (10:16 +0200)]
monitor: fix dangling CPU pointer
If a CPU selected with the "cpu" command is hot-unplugged then "info cpus"
causes QEMU to exit:
(qemu) device_del cpu1
(qemu) info cpus
qemu:qemu_cpu_kick_thread: No such process
This happens because "cpu" stores the pointer to the selected CPU into
the monitor structure. When the CPU is hot-unplugged, we end up with a
dangling pointer. The "info cpus" command then does:
hmp_info_cpus()
monitor_get_cpu_index()
mon_get_cpu()
cpu_synchronize_state() <--- called with dangling pointer
This could cause a QEMU crash as well.
This patch switches the monitor to store the QOM path instead of a
pointer to the current CPU. The path is then resolved when needed.
If the resolution fails, we assume that the CPU was removed and the
path is resetted to the default (ie, path of first_cpu).
Peter Maydell [Mon, 30 Oct 2017 13:02:45 +0000 (13:02 +0000)]
Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20171030' into staging
s390x: fixups for 2.11
- missing \r in the BIOS console output
- CPU type name is now "s390x-cpu"
- fixup for the host-model on z14 and older machine versions
# gpg: Signature made Mon 30 Oct 2017 08:34:15 GMT
# gpg: using RSA key 0x117BBC80B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <[email protected]>"
# Primary key fingerprint: F922 9381 A334 08F9 DBAB FBCA 117B BC80 B5A6 1C7C
* remotes/borntraeger/tags/s390x-20171030:
s390-*.img: update s390 bios with latest fixes
s390-ccw: print carriage return with new lines
s390x/kvm: use cpu model for gscb on compat machines
target/s390x: change CPU type name to "s390x-cpu"
# gpg: Signature made Sun 29 Oct 2017 13:07:43 GMT
# gpg: using RSA key 0xF487EF185872D723
# gpg: Good signature from "Juan Quintela <[email protected]>"
# gpg: aka "Juan Quintela <[email protected]>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/juanquintela/tags/migration/20171029:
tests: check that migration parameters are really assigned
tests: Don't abuse global_qtest
tests: Factorize out migrate_test_start/end
tests: Refactor setting of parameters/capabilities
tests: rename postcopy-test to migration-test
migration: Make xbzrle_cache_size a migration parameter
migration: No need to return the size of the cache
migration: Don't play games with the requested cache size
migration: Make sure that we pass the right cache size
Peter Maydell [Mon, 30 Oct 2017 10:11:22 +0000 (10:11 +0000)]
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging
x86/cpu/numa queue, 2017-10-27
# gpg: Signature made Fri 27 Oct 2017 15:17:12 BST
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <[email protected]>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-and-machine-pull-request: (39 commits)
x86: Skip check apic_id_limit for Xen
numa: fixup parsed NumaNodeOptions earlier
mips: r4k: replace cpu_model with cpu_type
mips: mipssim: replace cpu_model with cpu_type
mips: Magnum/Acer Pica 61: replace cpu_model with cpu_type
mips: fulong2e: replace cpu_model with cpu_type
mips: malta/boston: replace cpu_model with cpu_type
mips: use object_new() instead of gnew()+object_initialize()
sparc: leon3: use generic cpu_model parsing
sparc: sparc: use generic cpu_model parsing
sparc: sun4u/sun4v/niagara: use generic cpu_model parsing
sparc: cleanup cpu type name composition
tricore: use generic cpu_model parsing
tricore: cleanup cpu type name composition
unicore32: use generic cpu_model parsing
unicore32: cleanup cpu type name composition
xtensa: lx60/lx200/ml605/kc705: use generic cpu_model parsing
xtensa: sim: use generic cpu_model parsing
xtensa: cleanup cpu type name composition
sh4: remove SuperHCPUClass::name field
...
The sclp console in the s390 bios writes raw data,
leading console emulators (such as virsh console) to
treat a new line ('\n') as just a new line instead
of as a Unix line feed. Because of this, output
appears in a "stair case" pattern.
Let's print \r\n on every occurrence of a new line
in the string passed to write to amend this issue.
This is in sync with the guest Linux code in
drivers/s390/char/sclp_vt220.c which also does a line feed
conversion in the console part of the driver.
This fixes the s390-ccw and s390-netboot output like
$ virsh start test --console
Domain test started
Connected to domain test
Escape character is ^]
Network boot starting...
Using MAC address: 02:01:02:03:04:05
Requesting information via DHCP: 010
s390x/kvm: use cpu model for gscb on compat machines
Starting a guest with
<os>
<type arch='s390x' machine='s390-ccw-virtio-2.9'>hvm</type>
</os>
<cpu mode='host-model'/>
on an IBM z14 results in
"qemu-system-s390x: Some features requested in the CPU model are not
available in the configuration: gs"
This is because guarded storage is fenced for compat machines that did
not have guarded storage support. While this prevents future migration
abort (by not starting the guest at all), not being able to start a
"host-model" guest is very much unexpected. As it turns out, even if we
would modify libvirt to not expand the cpu model to contain "gs" for
compat machines, it cannot guarantee that a migration will succeed. For
example if the kernel changes its features (or the user has nested=1 on
one host but not on the other) the migration will fail nevertheless. So
instead of fencing "gs" for machines <= 2.9 lets allow it for all
machine types that support the CPU model. This will make "host-model"
runnable all the time, while relying on the CPU model to reject invalid
migration attempts. We also need to change the migration for guarded
storage.
Additional discussions about host-model are still pending but are out
of scope of this patch.
For now, e.g. host-s390-cpu wasn't exposed to the user. cpu-add, -cpu
and the CPU model qmp interfaces didn't care about the actual type,
as that information was hidden.
This changed with CPU hotplug via device_add. Now the type is visible to
the user. Before we get that supported in a stable version, this is our
last chance to change it.
So change it from "s390-cpu" to "s390x-cpu", to match the architecture
name. Example names are then e.g. z14-s390x-cpu or qemu-s390x-cpu.
Juan Quintela [Thu, 5 Oct 2017 19:30:10 +0000 (21:30 +0200)]
migration: Make xbzrle_cache_size a migration parameter
Right now it is a variable in MigrationState instead of a
MigrationParameter. The change allows to set it as the rest of the
Migration parameters, from the command line, with
query_migration_paramters, set_migrate_parameters, etc.
Juan Quintela [Fri, 6 Oct 2017 21:03:55 +0000 (23:03 +0200)]
migration: No need to return the size of the cache
After the previous commits, we make sure that the value passed is
right, or we just drop an error. So now we return if there is one
error or we have setup correctly the value passed.
Peter Maydell [Sat, 28 Oct 2017 08:59:38 +0000 (09:59 +0100)]
Merge remote-tracking branch 'remotes/mdroth/tags/qga-pull-2017-10-26-tag' into staging
qemu-ga patch queue for 2.11
* support for network interface stats
* w32: improvements for guest-set-time
* w32: fix a hang with guest-fsfreeze-freeze when timeout occurs
during heavy I/O
* w32: fix faulty error-handling in VSS/fsfreeze COM registration
* remotes/mdroth/tags/qga-pull-2017-10-26-tag:
qga-win: fix error-handling in getNameByStringSID()
qga: add network stats to guest-network-get-interfaces
qga-win: Updating guest_set_time action
qga-win: don't hang if vss hold writes timeout
Igor Mammedov [Thu, 12 Oct 2017 09:39:58 +0000 (11:39 +0200)]
numa: fixup parsed NumaNodeOptions earlier
numa 'mem' option with suffix or without one is possible
only on CLI/HMP. Instead of fixing up special suffix less
CLI case deep in parse_numa_node() do it earlier right
after option is parsed into NumaNodeOptions with OptVisistor
so that the rest of the code would use valid values in
NumaNodeOptions and won't have to reparse QemuOpts.
It will help to isolate CLI/HMP parts in parse_numa() and
split out parsed NumaNodeOptions processing into separate
function that could be reused by QMP handler where we have
only NumaNodeOptions and don't need any fixups.
While at it reuse qemu_strtosz_MiB() instead of manually
checking for suffixes.
Igor Mammedov [Thu, 5 Oct 2017 13:51:09 +0000 (15:51 +0200)]
mips: use object_new() instead of gnew()+object_initialize()
object_initialize() is intended for inplace initialization of
objects, but here it's first allocated with g_new0() and then
initialized with object_initialize(). QEMU already has API
to do this (object_new), so do object creation with suitable
for usecase API.
Igor Mammedov [Thu, 5 Oct 2017 13:51:03 +0000 (15:51 +0200)]
tricore: cleanup cpu type name composition
introduce TRICORE_CPU_TYPE_NAME macro and use it to construct
cpu type names. While at it move cpu type_infos into one
array and register it directly with type_init_from_array()
instead of custom tricore_cpu_register_types()/cpu_register()
Igor Mammedov [Thu, 5 Oct 2017 13:51:01 +0000 (15:51 +0200)]
unicore32: cleanup cpu type name composition
use new UNICORE32_CPU_TYPE_NAME to compose CPU type
name and get rid of intermediate
UniCore32CPUInfo/uc32_cpu_register_types()
which is replaced by static TypeInfo array and
type_init_from_array()
Igor Mammedov [Thu, 5 Oct 2017 13:50:57 +0000 (15:50 +0200)]
sh4: remove SuperHCPUClass::name field
the field contains upper-cased cpu model name and is used
for printing supported cpu model names for '-cpu help'.
Considering that cpu model lookup in superh_cpu_class_by_name()
is case-insensitive, we can drop upper-casing when
printing supported cpus list and use cpu type directly
to do the same by cutting out SUPERH_CPU_TYPE_SUFFIX from
typename.
It allows to remove SuperHCPUClass::name, which practically
duplicates names defined by TYPE_SH*_CPU definitions and
simplify sh*_class_init()/SuperHCPUClass a bit.
Igor Mammedov [Thu, 5 Oct 2017 13:50:56 +0000 (15:50 +0200)]
sh4: simplify superh_cpu_class_by_name()
currently for sh4 cpu_model argument for '-cpu' option
could be either 'cpu model' name or cpu_typename.
however typically '-cpu' takes 'cpu model' name and
cpu type for sh4 target isn't advertised publicly
('-cpu help' prints only 'cpu model' names) so we
shouldn't care about this use case (it's more of a bug).
1. Drop '-cpu cpu_typename' to align with the rest of
targets.
2. Compose searched for typename from cpu model and use
it with object_class_by_name() directly instead of
over-complicated
object_class_get_list()
g_slist_find_custom() + superh_cpu_name_compare()
With #1 droped, #2 could be used for both lookups which
simplifies superh_cpu_class_by_name() quite a bit.
Igor Mammedov [Thu, 5 Oct 2017 13:50:55 +0000 (15:50 +0200)]
sh4: cleanup cpu type name composition
introduce SUPERH_CPU_TYPE_NAME macro and use it to construct
cpu type names. While at it move cpu type_infos into one
array and register it directly with type_init_from_array()
instead of custom superh_cpu_register_types()
Igor Mammedov [Thu, 5 Oct 2017 13:50:51 +0000 (15:50 +0200)]
openrisc: cleanup cpu type name composition
use new OPENRISC_CPU_TYPE_NAME to compose CPU type name and get
rid of intermediate OpenRISCCPUInfo/openrisc_cpu_register_types()
which is replaced by static TypeInfo array.
Igor Mammedov [Thu, 5 Oct 2017 13:50:49 +0000 (15:50 +0200)]
moxie: cleanup cpu type name composition
introduce MOXIE_CPU_TYPE_NAME macro and consistently use it
to construct cpu type names. While at it replace dynamic
cpu type name composition with static data.
Igor Mammedov [Thu, 5 Oct 2017 13:50:48 +0000 (15:50 +0200)]
moxie: fix qemu-system-moxie failing to start with CLI "-cpu MoxieLite"
It 'works' with default CPU only because of bug in
moxie_cpu_class_by_name() where it treats cpu_model
as type name and default cpu_model also happens to be
type name. But specifying explicitly cpu on CLI,
ex: '-cpu MoxieLite', makes QEMU fail since
moxie_cpu_class_by_name() doesn't traslate cpu_model
to cpu type and fails to find corresponding object class.
Fix moxie_cpu_class_by_name() to do proper
cpu_model -> cpu type
translation and fix default cpu_model to be cpu_model
instead of being typename.
Igor Mammedov [Thu, 5 Oct 2017 13:50:45 +0000 (15:50 +0200)]
m68k: cleanup cpu type name composition
use new M68K_CPU_TYPE_NAME to compose CPU type names
and get rid of intermediate M68kCPUInfo/register_cpu_type()
which is replaced by static TypeInfo array.
Igor Mammedov [Thu, 5 Oct 2017 13:50:42 +0000 (15:50 +0200)]
lm32: cleanup cpu type name composition
introduce LM32_CPU_TYPE_NAME macro and consistently use it
to construct cpu type names. While at it replace dynamic
cpu type name composition with static data.
Igor Mammedov [Thu, 5 Oct 2017 13:50:38 +0000 (15:50 +0200)]
alpha: cleanup cpu type name composition
Introduce ALPHA_CPU_TYPE_NAME macro to replace rather ununique
TYPE macro that alpha uses. With new macro it will follow
the same naming convention as other targets.
While at it put scattered TypeInfo into one array which places
type desriptions at one place and reduces code a bit.
Peter Maydell [Fri, 27 Oct 2017 13:43:02 +0000 (14:43 +0100)]
Merge remote-tracking branch 'remotes/sstabellini/tags/xen-20171026-tag' into staging
Xen 2017/10/26
# gpg: Signature made Thu 26 Oct 2017 23:57:16 BST
# gpg: using RSA key 0x894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <[email protected]>"
# gpg: aka "Stefano Stabellini <[email protected]>"
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90
* remotes/sstabellini/tags/xen-20171026-tag:
xen: Log errno rather than return value
xen: dont try setting max grants multiple times
xen: add a global indicator for grant copy being available
Peter Maydell [Fri, 27 Oct 2017 08:29:05 +0000 (09:29 +0100)]
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Thu 26 Oct 2017 14:02:54 BST
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <[email protected]>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (35 commits)
iotests: Add cluster_size=64k to 125
qcow2: Always execute preallocate() in a coroutine
qcow2: Fix unaligned preallocated truncation
qcow2: Emit errp when truncating the image tail
iotests: Filter actual image size in 184 and 191
iotests: Pull _filter_actual_image_size from 67/87
iotests: Add test for dataplane mirroring
qcow2: Use BDRV_SECTOR_BITS instead of its literal value
qemu-img.1: Image invalidation on qemu-img commit
qemu-io: Relax 'alloc' now that block-status doesn't assert
qcow2: Reduce is_zero() rounding
block: Reduce bdrv_aligned_preadv() rounding
block: Align block status requests
qemu-img: Change img_compare() to be byte-based
qemu-img: Change img_rebase() to be byte-based
qemu-img: Change compare_sectors() to be byte-based
qemu-img: Change check_empty_sectors() to byte-based
qemu-img: Drop redundant error message in compare
qemu-img: Add find_nonzero()
qemu-img: Speed up compare on pre-allocated larger file
...
Peter Maydell [Fri, 27 Oct 2017 07:04:51 +0000 (08:04 +0100)]
Merge remote-tracking branch 'remotes/rth/tags/pull-dis-20171026' into staging
Capstone disassembler
# gpg: Signature made Thu 26 Oct 2017 10:57:27 BST
# gpg: using RSA key 0x64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <[email protected]>"
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-dis-20171026:
disas: Add capstone as submodule
disas: Remove monitor_disas_is_physical
ppc: Support Capstone in disas_set_info
arm: Support Capstone in disas_set_info
i386: Support Capstone in disas_set_info
disas: Support the Capstone disassembler library
disas: Remove unused flags arguments
target/arm: Don't set INSN_ARM_BE32 for CONFIG_USER_ONLY
target/arm: Move BE32 disassembler fixup
target/ppc: Convert to disas_set_info hook
target/i386: Convert to disas_set_info hook
Michael Roth [Fri, 27 Oct 2017 00:53:45 +0000 (19:53 -0500)]
qga-win: fix error-handling in getNameByStringSID()
In one case we misconstrue a BOOL return as an HRESULT, and in the
other case we don't check the BOOL return from LookupAccountSidW()
before extracting the HRESULT from GetLastError(). Both can lead to
getNameByStringSID() misreporting an error.
xen: add a global indicator for grant copy being available
The Xen qdisk backend needs to test whether grant copy operations is
available in the kernel. Unfortunately this collides with using
xengnttab_set_max_grants() on some kernels as this operation has to
be the first one after opening the gnttab device.
In order to solve this problem test for the availability of grant copy
in xen_be_init() opening the gnttab device just for that purpose and
closing it again afterwards. Advertise the availability via a global
flag and use that flag in the qdisk backend.
Kevin Wolf [Thu, 26 Oct 2017 13:02:40 +0000 (15:02 +0200)]
Merge remote-tracking branch 'mreitz/tags/pull-block-2017-10-26' into queue-block
Block patches
# gpg: Signature made Thu Oct 26 15:01:20 2017 CEST
# gpg: using RSA key F407DB0061D5CF40
# gpg: Good signature from "Max Reitz <[email protected]>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* mreitz/tags/pull-block-2017-10-26:
iotests: Add cluster_size=64k to 125
qcow2: Always execute preallocate() in a coroutine
qcow2: Fix unaligned preallocated truncation
qcow2: Emit errp when truncating the image tail
iotests: Filter actual image size in 184 and 191
iotests: Pull _filter_actual_image_size from 67/87
iotests: Add test for dataplane mirroring
qcow2: Use BDRV_SECTOR_BITS instead of its literal value
projects / qemu.git / log