tests/acpi: update golden master DSDT binary table blobs for q35

In the previously applied commit ("piix4: don't reserve hw resources when
hotplug is off globally"), we make changes to the ACPI DSDT tables
such that some ACPI code are not generated when bsel is absent. Since
as of this point in time, in q35 machines, we do not use bsel for pci
buses, we need to update the DSDT table blobs.
This patch updates the DSDT golden master tables for q35 machines.
At the same time, we clear bios-tables-test-allowed-diff.h for future
changes which update tables.

Following is a typical diff between the q35 acpi DSDT table blobs:

@@ -1,30 +1,30 @@
 /*
  * Intel ACPI Component Architecture
  * AML/ASL+ Disassembler version 20180105 (64-bit version)
  * Copyright (c) 2000 - 2018 Intel Corporation
  *
  * Disassembling to symbolic ASL+ operators
  *
- * Disassembly of tests/data/acpi/q35/DSDT, Tue Sep 15 18:52:47 2020
+ * Disassembly of /tmp/aml-3O0DR0, Tue Sep 15 18:52:47 2020
  *
  * Original Table Header:
  *     Signature        "DSDT"
- *     Length           0x00001DFE (7678)
+ *     Length           0x00001DF6 (7670)
  *     Revision         0x01 **** 32-bit table (V1), no 64-bit math support
- *     Checksum         0xAC
+ *     Checksum         0x17
  *     OEM ID           "BOCHS "
  *     OEM Table ID     "BXPCDSDT"
  *     OEM Revision     0x00000001 (1)
  *     Compiler ID      "BXPC"
  *     Compiler Version 0x00000001 (1)
  */
 DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPCDSDT", 0x00000001)
 {
     Scope (\)
     {
         OperationRegion (DBG, SystemIO, 0x0402, One)
         Field (DBG, ByteAcc, NoLock, Preserve)
         {
             DBGB,   8
         }

@@ -3113,24 +3113,20 @@
                 Name (_ADR, 0x00010000)  // _ADR: Address
                 Method (_S1D, 0, NotSerialized)  // _S1D: S1 Device State
                 {
                     Return (Zero)
                 }

                 Method (_S2D, 0, NotSerialized)  // _S2D: S2 Device State
                 {
                     Return (Zero)
                 }

                 Method (_S3D, 0, NotSerialized)  // _S3D: S3 Device State
                 {
                     Return (Zero)
                 }
             }
-
-            Method (PCNT, 0, NotSerialized)
-            {
-            }
         }
     }
 }

Signed-off-by: Ani Sinha <[email protected]>
Acked-by: Igor Mammedov <[email protected]>
Message-Id: <20200918084111[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

piix4: don't reserve hw resources when hotplug is off globally

When acpi hotplug is turned off for both root pci bus as well as for pci
bridges, we should not generate the related ACPI code for DSDT table or
initialize related hw ports or reserve hw resources. This change makes
sure all those operations are turned off in the case ACPI pci hotplug is
off globally.

In this change, we also make sure ACPI code for the PCNT method are only
added when bsel is enabled for the corresponding pci bus or bridge hotplug
is turned on.

As q35 machines do not use bsel for it's pci buses at this point in time, this
change affects DSDT acpi table for q35 machines as well. Therefore, we will
also need to commit the updated golden master DSDT table acpi binary blobs as
well. Following is the list of blobs which needs updating:

 tests/data/acpi/q35/DSDT
 tests/data/acpi/q35/DSDT.acpihmat
 tests/data/acpi/q35/DSDT.bridge
 tests/data/acpi/q35/DSDT.cphp
 tests/data/acpi/q35/DSDT.dimmpxm
 tests/data/acpi/q35/DSDT.ipmibt
 tests/data/acpi/q35/DSDT.memhp
 tests/data/acpi/q35/DSDT.mmio64
 tests/data/acpi/q35/DSDT.numamem
 tests/data/acpi/q35/DSDT.tis

These tables are updated in the following commit. Without the updated table
blobs, the unit tests would fail with this patch.

Signed-off-by: Ani Sinha <[email protected]>
Reviewed-by: Igor Mammedov <[email protected]>
Message-Id: <20200918084111[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

Add ACPI DSDT tables for q35 that are being updated by the next patch

The following patch ("piix4: don't reserve hw resources when
hotplug is off globally") modifies certain ACPI tables for q35 machines.
This patch adds those table names to tests/qtest/bios-tables-test-allowed-diff.h
so that unit tests continue to pass and bisection is not broken.

Signed-off-by: Ani Sinha <[email protected]>
Reviewed-by: Igor Mammedov <[email protected]>
Message-Id: <20200918084111[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

tests/acpi: add newly added acpi DSDT table blob for pci bridge hotplug flag

This patch adds a binary blob corresponding to the DSDT acpi table. It is used
to unit test the flag 'acpi-pci-hotplug-with-bridge-support' used with pci
bridges.

This change also clears the file tests/qtest/bios-tables-test-allowed-diff.h
so that future changes which affect the table can be caught.

The following is the diff between files tests/data/acpi/pc/DSDT.bridge and
tests/data/acpi/pc/DSDT.hpbridge after disassembly :

@@ -1,30 +1,30 @@
 /*
  * Intel ACPI Component Architecture
  * AML/ASL+ Disassembler version 20180105 (64-bit version)
  * Copyright (c) 2000 - 2018 Intel Corporation
  *
  * Disassembling to symbolic ASL+ operators
  *
- * Disassembly of tests/data/acpi/pc/DSDT.bridge, Fri Sep 11 23:21:34 2020
+ * Disassembly of /tmp/aml-7UURQ0, Fri Sep 11 23:21:34 2020
  *
  * Original Table Header:
  *     Signature        "DSDT"
- *     Length           0x00001A89 (6793)
+ *     Length           0x0000131F (4895)
  *     Revision         0x01 **** 32-bit table (V1), no 64-bit math support
- *     Checksum         0x09
+ *     Checksum         0xF9
  *     OEM ID           "BOCHS "
  *     OEM Table ID     "BXPCDSDT"
  *     OEM Revision     0x00000001 (1)
  *     Compiler ID      "BXPC"
  *     Compiler Version 0x00000001 (1)
  */
 DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPCDSDT", 0x00000001)
 {
     Scope (\)
     {
         OperationRegion (DBG, SystemIO, 0x0402, One)
         Field (DBG, ByteAcc, NoLock, Preserve)
         {
             DBGB,   8
         }

@@ -859,522 +859,32 @@
                 }

                 Method (_S2D, 0, NotSerialized)  // _S2D: S2 Device State
                 {
                     Return (Zero)
                 }

                 Method (_S3D, 0, NotSerialized)  // _S3D: S3 Device State
                 {
                     Return (Zero)
                 }
             }

             Device (S18)
             {
                 Name (_ADR, 0x00030000)  // _ADR: Address
-                Name (BSEL, One)
-                Device (S00)
-                {
-                    Name (_SUN, Zero)  // _SUN: Slot User Number
-                    Name (_ADR, Zero)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S08)
-                {
-                    Name (_SUN, One)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00010000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S10)
-                {
-                    Name (_SUN, 0x02)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00020000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S18)
-                {
-                    Name (_SUN, 0x03)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00030000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S20)
-                {
-                    Name (_SUN, 0x04)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00040000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S28)
-                {
-                    Name (_SUN, 0x05)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00050000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S30)
-                {
-                    Name (_SUN, 0x06)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00060000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S38)
-                {
-                    Name (_SUN, 0x07)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00070000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S40)
-                {
-                    Name (_SUN, 0x08)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00080000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S48)
-                {
-                    Name (_SUN, 0x09)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00090000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S50)
-                {
-                    Name (_SUN, 0x0A)  // _SUN: Slot User Number
-                    Name (_ADR, 0x000A0000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S58)
-                {
-                    Name (_SUN, 0x0B)  // _SUN: Slot User Number
-                    Name (_ADR, 0x000B0000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S60)
-                {
-                    Name (_SUN, 0x0C)  // _SUN: Slot User Number
-                    Name (_ADR, 0x000C0000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S68)
-                {
-                    Name (_SUN, 0x0D)  // _SUN: Slot User Number
-                    Name (_ADR, 0x000D0000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S70)
-                {
-                    Name (_SUN, 0x0E)  // _SUN: Slot User Number
-                    Name (_ADR, 0x000E0000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S78)
-                {
-                    Name (_SUN, 0x0F)  // _SUN: Slot User Number
-                    Name (_ADR, 0x000F0000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S80)
-                {
-                    Name (_SUN, 0x10)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00100000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S88)
-                {
-                    Name (_SUN, 0x11)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00110000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S90)
-                {
-                    Name (_SUN, 0x12)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00120000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (S98)
-                {
-                    Name (_SUN, 0x13)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00130000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (SA0)
-                {
-                    Name (_SUN, 0x14)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00140000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (SA8)
-                {
-                    Name (_SUN, 0x15)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00150000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (SB0)
-                {
-                    Name (_SUN, 0x16)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00160000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (SB8)
-                {
-                    Name (_SUN, 0x17)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00170000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (SC0)
-                {
-                    Name (_SUN, 0x18)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00180000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (SC8)
-                {
-                    Name (_SUN, 0x19)  // _SUN: Slot User Number
-                    Name (_ADR, 0x00190000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (SD0)
-                {
-                    Name (_SUN, 0x1A)  // _SUN: Slot User Number
-                    Name (_ADR, 0x001A0000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (SD8)
-                {
-                    Name (_SUN, 0x1B)  // _SUN: Slot User Number
-                    Name (_ADR, 0x001B0000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (SE0)
-                {
-                    Name (_SUN, 0x1C)  // _SUN: Slot User Number
-                    Name (_ADR, 0x001C0000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (SE8)
-                {
-                    Name (_SUN, 0x1D)  // _SUN: Slot User Number
-                    Name (_ADR, 0x001D0000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (SF0)
-                {
-                    Name (_SUN, 0x1E)  // _SUN: Slot User Number
-                    Name (_ADR, 0x001E0000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Device (SF8)
-                {
-                    Name (_SUN, 0x1F)  // _SUN: Slot User Number
-                    Name (_ADR, 0x001F0000)  // _ADR: Address
-                    Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                    {
-                        PCEJ (BSEL, _SUN)
-                    }
-                }
-
-                Method (DVNT, 2, NotSerialized)
-                {
-                    If ((Arg0 & One))
-                    {
-                        Notify (S00, Arg1)
-                    }
-
-                    If ((Arg0 & 0x02))
-                    {
-                        Notify (S08, Arg1)
-                    }
-
-                    If ((Arg0 & 0x04))
-                    {
-                        Notify (S10, Arg1)
-                    }
-
-                    If ((Arg0 & 0x08))
-                    {
-                        Notify (S18, Arg1)
-                    }
-
-                    If ((Arg0 & 0x10))
-                    {
-                        Notify (S20, Arg1)
-                    }
-
-                    If ((Arg0 & 0x20))
-                    {
-                        Notify (S28, Arg1)
-                    }
-
-                    If ((Arg0 & 0x40))
-                    {
-                        Notify (S30, Arg1)
-                    }
-
-                    If ((Arg0 & 0x80))
-                    {
-                        Notify (S38, Arg1)
-                    }
-
-                    If ((Arg0 & 0x0100))
-                    {
-                        Notify (S40, Arg1)
-                    }
-
-                    If ((Arg0 & 0x0200))
-                    {
-                        Notify (S48, Arg1)
-                    }
-
-                    If ((Arg0 & 0x0400))
-                    {
-                        Notify (S50, Arg1)
-                    }
-
-                    If ((Arg0 & 0x0800))
-                    {
-                        Notify (S58, Arg1)
-                    }
-
-                    If ((Arg0 & 0x1000))
-                    {
-                        Notify (S60, Arg1)
-                    }
-
-                    If ((Arg0 & 0x2000))
-                    {
-                        Notify (S68, Arg1)
-                    }
-
-                    If ((Arg0 & 0x4000))
-                    {
-                        Notify (S70, Arg1)
-                    }
-
-                    If ((Arg0 & 0x8000))
-                    {
-                        Notify (S78, Arg1)
-                    }
-
-                    If ((Arg0 & 0x00010000))
-                    {
-                        Notify (S80, Arg1)
-                    }
-
-                    If ((Arg0 & 0x00020000))
-                    {
-                        Notify (S88, Arg1)
-                    }
-
-                    If ((Arg0 & 0x00040000))
-                    {
-                        Notify (S90, Arg1)
-                    }
-
-                    If ((Arg0 & 0x00080000))
-                    {
-                        Notify (S98, Arg1)
-                    }
-
-                    If ((Arg0 & 0x00100000))
-                    {
-                        Notify (SA0, Arg1)
-                    }
-
-                    If ((Arg0 & 0x00200000))
-                    {
-                        Notify (SA8, Arg1)
-                    }
-
-                    If ((Arg0 & 0x00400000))
-                    {
-                        Notify (SB0, Arg1)
-                    }
-
-                    If ((Arg0 & 0x00800000))
-                    {
-                        Notify (SB8, Arg1)
-                    }
-
-                    If ((Arg0 & 0x01000000))
-                    {
-                        Notify (SC0, Arg1)
-                    }
-
-                    If ((Arg0 & 0x02000000))
-                    {
-                        Notify (SC8, Arg1)
-                    }
-
-                    If ((Arg0 & 0x04000000))
-                    {
-                        Notify (SD0, Arg1)
-                    }
-
-                    If ((Arg0 & 0x08000000))
-                    {
-                        Notify (SD8, Arg1)
-                    }
-
-                    If ((Arg0 & 0x10000000))
-                    {
-                        Notify (SE0, Arg1)
-                    }
-
-                    If ((Arg0 & 0x20000000))
-                    {
-                        Notify (SE8, Arg1)
-                    }
-
-                    If ((Arg0 & 0x40000000))
-                    {
-                        Notify (SF0, Arg1)
-                    }
-
-                    If ((Arg0 & 0x80000000))
-                    {
-                        Notify (SF8, Arg1)
-                    }
-                }
-
-                Method (PCNT, 0, NotSerialized)
-                {
-                    BNUM = One
-                    DVNT (PCIU, One)
-                    DVNT (PCID, 0x03)
-                }
             }

             Device (S20)
             {
                 Name (_SUN, 0x04)  // _SUN: Slot User Number
                 Name (_ADR, 0x00040000)  // _ADR: Address
                 Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
                 {
                     PCEJ (BSEL, _SUN)
                 }
             }

             Device (S28)
             {
                 Name (_SUN, 0x05)  // _SUN: Slot User Number
                 Name (_ADR, 0x00050000)  // _ADR: Address
@@ -1779,22 +1289,21 @@
                 If ((Arg0 & 0x40000000))
                 {
                     Notify (SF0, Arg1)
                 }

                 If ((Arg0 & 0x80000000))
                 {
                     Notify (SF8, Arg1)
                 }
             }

             Method (PCNT, 0, NotSerialized)
             {
                 BNUM = Zero
                 DVNT (PCIU, One)
                 DVNT (PCID, 0x03)
-                ^S18.PCNT ()
             }
         }
     }
 }

Signed-off-by: Ani Sinha <[email protected]>
Acked-by: Igor Mammedov <[email protected]>
Message-Id: <20200918084111[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

tests/acpi: unit test for 'acpi-pci-hotplug-with-bridge-support' bridge flag

This change adds a new unit test for the global flag
'acpi-pci-hotplug-with-bridge-support' which is available for cold plugged pci
bridges in i440fx. The flag can be used to turn off ACPI based hotplug support
on all pci bridges.

Signed-off-by: Ani Sinha <[email protected]>
Reviewed-by: Igor Mammedov <[email protected]>
Message-Id: <20200918084111[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

tests/acpi: list added acpi table binary file for pci bridge hotplug test

The file 'tests/data/acpi/pc/DSDT.hpbridge' is a newly added acpi table file
for testing the pci bridge option 'acpi-pci-hotplug-with-bridge-support' under
i440fx. This change documents this fact.

Signed-off-by: Ani Sinha <[email protected]>
Reviewed-by: Igor Mammedov <[email protected]>
Message-Id: <20200918084111[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

i440fx/acpi: do not add hotplug related amls for cold plugged bridges

Cold plugged bridges are not hot unpluggable, even when their hotplug
property (acpi-pci-hotplug-with-bridge-support) is turned off. Please see
the function acpi_pcihp_pc_no_hotplug(). However, with
the current implementaton, Windows would try to hot-unplug a pci bridge when
it's hotplug switch is off. This is regardless of whether there are devices
attached to the bridge. This is because we add ACPI code like _EJ0 etc for the
pci slot where the bridge is cold plugged.

In this fix, we identify a cold plugged bridge and for cold plugged bridges,
we do not add the appropriate ACPI methods that are used by the OS
to identify a hot-pluggable/unpluggable pci device. After this change, Windows
does not detect the cold plugged pci bridge as ejectable.

As a result of the patch, the following are the changes to the DSDT ACPI
table:

@@ -858,38 +858,33 @@
                     Return (Zero)
                 }

                 Method (_S2D, 0, NotSerialized)  // _S2D: S2 Device State
                 {
                     Return (Zero)
                 }

                 Method (_S3D, 0, NotSerialized)  // _S3D: S3 Device State
                 {
                     Return (Zero)
                 }
             }

             Device (S18)
             {
-                Name (_SUN, 0x03)  // _SUN: Slot User Number
                 Name (_ADR, 0x00030000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
             }

             Device (S20)
             {
                 Name (_SUN, 0x04)  // _SUN: Slot User Number
                 Name (_ADR, 0x00040000)  // _ADR: Address
                 Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
                 {
                     PCEJ (BSEL, _SUN)
                 }
             }

             Device (S28)
             {
                 Name (_SUN, 0x05)  // _SUN: Slot User Number
                 Name (_ADR, 0x00050000)  // _ADR: Address
@@ -1148,37 +1143,32 @@
                     PCEJ (BSEL, _SUN)
                 }
             }

             Device (SF8)
             {
                 Name (_SUN, 0x1F)  // _SUN: Slot User Number
                 Name (_ADR, 0x001F0000)  // _ADR: Address
                 Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
                 {
                     PCEJ (BSEL, _SUN)
                 }
             }

             Method (DVNT, 2, NotSerialized)
             {
-                If ((Arg0 & 0x08))
-                {
-                    Notify (S18, Arg1)
-                }
-
                 If ((Arg0 & 0x10))
                 {
                     Notify (S20, Arg1)
                 }

                 If ((Arg0 & 0x20))
                 {
                     Notify (S28, Arg1)
                 }

                 If ((Arg0 & 0x40))
                 {
                     Notify (S30, Arg1)
                 }

                 If ((Arg0 & 0x80))

While at it, I have also updated a stale comment.

Signed-off-by: Ani Sinha <[email protected]>
Suggested-by: Julia Suvorova <[email protected]>
Reviewed-by: Julia Suvorova <[email protected]>
Reviewed-by: Igor Mammedov <[email protected]>
Message-Id: <20200918084111[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

Fix a gap where acpi_pcihp_find_hotplug_bus() returns a non-hotpluggable bus

When ACPI hotplug for the root bus is disabled, the bsel property for that
bus is not set. Please see the following commit:

3d7e78aa7777f ("Introduce a new flag for i440fx to disable PCI hotplug on the
root bus").

As a result, when acpi_pcihp_find_hotplug_bus() is called
with bsel set to 0, it may return the root bus. This can cause devices
attached to the root bus to get hot-unplugged if the user issues the following
set of commmands:

outl 0xae10 0
outl 0xae08 your_slot

Thanks to Julia for pointing this out here:
https://www.mail-archive.com/[email protected]/msg734548.html

In this patch, we fix the issue in this function by checking if the bus which
is returned by the function is actually hotpluggable. If not, we simply return
NULL. This avoids the scenario where we were returning a non-hotpluggable bus.

Signed-off-by: Ani Sinha <[email protected]>
Reviewed-by: Igor Mammedov <[email protected]>
Message-Id: <20200918084111[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

tests/acpi: add a new ACPI table in order to test root pci hotplug on/off

A new binary ACPI table tests/data/acpi/pc/DSDT.roothp is added in order
to unit test hotplug on/off capability on the root pci bus for i440fx.
The diff between the table DSDT.bridge and DSDT.roothp is listed below:

@@ -1,30 +1,30 @@
 /*
  * Intel ACPI Component Architecture
  * AML/ASL+ Disassembler version 20180105 (64-bit version)
  * Copyright (c) 2000 - 2018 Intel Corporation
  *
  * Disassembling to symbolic ASL+ operators
  *
- * Disassembly of tests/data/acpi/pc/DSDT.bridge, Fri Sep 11 22:51:04 2020
+ * Disassembly of /tmp/aml-UGIHQ0, Fri Sep 11 22:51:04 2020
  *
  * Original Table Header:
  *     Signature        "DSDT"
- *     Length           0x00001A89 (6793)
+ *     Length           0x0000140A (5130)
  *     Revision         0x01 **** 32-bit table (V1), no 64-bit math support
- *     Checksum         0x09
+ *     Checksum         0xE6
  *     OEM ID           "BOCHS "
  *     OEM Table ID     "BXPCDSDT"
  *     OEM Revision     0x00000001 (1)
  *     Compiler ID      "BXPC"
  *     Compiler Version 0x00000001 (1)
  */
 DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPCDSDT", 0x00000001)
 {
     Scope (\)
     {
         OperationRegion (DBG, SystemIO, 0x0402, One)
         Field (DBG, ByteAcc, NoLock, Preserve)
         {
             DBGB,   8
         }

@@ -831,61 +831,60 @@
             Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
             {
                 IO (Decode16,
                     0x0510,             // Range Minimum
                     0x0510,             // Range Maximum
                     0x01,               // Alignment
                     0x0C,               // Length
                     )
             })
         }
     }

     Scope (\_SB)
     {
         Scope (PCI0)
         {
-            Name (BSEL, Zero)
             Device (S00)
             {
                 Name (_ADR, Zero)  // _ADR: Address
             }

             Device (S10)
             {
                 Name (_ADR, 0x00020000)  // _ADR: Address
                 Method (_S1D, 0, NotSerialized)  // _S1D: S1 Device State
                 {
                     Return (Zero)
                 }

                 Method (_S2D, 0, NotSerialized)  // _S2D: S2 Device State
                 {
                     Return (Zero)
                 }

                 Method (_S3D, 0, NotSerialized)  // _S3D: S3 Device State
                 {
                     Return (Zero)
                 }
             }

             Device (S18)
             {
                 Name (_ADR, 0x00030000)  // _ADR: Address
-                Name (BSEL, One)
+                Name (BSEL, Zero)
                 Device (S00)
                 {
                     Name (_SUN, Zero)  // _SUN: Slot User Number
                     Name (_ADR, Zero)  // _ADR: Address
                     Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
                     {
                         PCEJ (BSEL, _SUN)
                     }
                 }

                 Device (S08)
                 {
                     Name (_SUN, One)  // _SUN: Slot User Number
                     Name (_ADR, 0x00010000)  // _ADR: Address
                     Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
                     {
@@ -1345,456 +1344,30 @@
                         Notify (SE8, Arg1)
                     }

                     If ((Arg0 & 0x40000000))
                     {
                         Notify (SF0, Arg1)
                     }

                     If ((Arg0 & 0x80000000))
                     {
                         Notify (SF8, Arg1)
                     }
                 }

                 Method (PCNT, 0, NotSerialized)
                 {
-                    BNUM = One
+                    BNUM = Zero
                     DVNT (PCIU, One)
                     DVNT (PCID, 0x03)
                 }
             }

-            Device (S20)
-            {
-                Name (_SUN, 0x04)  // _SUN: Slot User Number
-                Name (_ADR, 0x00040000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S28)
-            {
-                Name (_SUN, 0x05)  // _SUN: Slot User Number
-                Name (_ADR, 0x00050000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S30)
-            {
-                Name (_SUN, 0x06)  // _SUN: Slot User Number
-                Name (_ADR, 0x00060000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S38)
-            {
-                Name (_SUN, 0x07)  // _SUN: Slot User Number
-                Name (_ADR, 0x00070000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S40)
-            {
-                Name (_SUN, 0x08)  // _SUN: Slot User Number
-                Name (_ADR, 0x00080000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S48)
-            {
-                Name (_SUN, 0x09)  // _SUN: Slot User Number
-                Name (_ADR, 0x00090000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S50)
-            {
-                Name (_SUN, 0x0A)  // _SUN: Slot User Number
-                Name (_ADR, 0x000A0000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S58)
-            {
-                Name (_SUN, 0x0B)  // _SUN: Slot User Number
-                Name (_ADR, 0x000B0000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S60)
-            {
-                Name (_SUN, 0x0C)  // _SUN: Slot User Number
-                Name (_ADR, 0x000C0000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S68)
-            {
-                Name (_SUN, 0x0D)  // _SUN: Slot User Number
-                Name (_ADR, 0x000D0000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S70)
-            {
-                Name (_SUN, 0x0E)  // _SUN: Slot User Number
-                Name (_ADR, 0x000E0000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S78)
-            {
-                Name (_SUN, 0x0F)  // _SUN: Slot User Number
-                Name (_ADR, 0x000F0000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S80)
-            {
-                Name (_SUN, 0x10)  // _SUN: Slot User Number
-                Name (_ADR, 0x00100000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S88)
-            {
-                Name (_SUN, 0x11)  // _SUN: Slot User Number
-                Name (_ADR, 0x00110000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S90)
-            {
-                Name (_SUN, 0x12)  // _SUN: Slot User Number
-                Name (_ADR, 0x00120000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (S98)
-            {
-                Name (_SUN, 0x13)  // _SUN: Slot User Number
-                Name (_ADR, 0x00130000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (SA0)
-            {
-                Name (_SUN, 0x14)  // _SUN: Slot User Number
-                Name (_ADR, 0x00140000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (SA8)
-            {
-                Name (_SUN, 0x15)  // _SUN: Slot User Number
-                Name (_ADR, 0x00150000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (SB0)
-            {
-                Name (_SUN, 0x16)  // _SUN: Slot User Number
-                Name (_ADR, 0x00160000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (SB8)
-            {
-                Name (_SUN, 0x17)  // _SUN: Slot User Number
-                Name (_ADR, 0x00170000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (SC0)
-            {
-                Name (_SUN, 0x18)  // _SUN: Slot User Number
-                Name (_ADR, 0x00180000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (SC8)
-            {
-                Name (_SUN, 0x19)  // _SUN: Slot User Number
-                Name (_ADR, 0x00190000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (SD0)
-            {
-                Name (_SUN, 0x1A)  // _SUN: Slot User Number
-                Name (_ADR, 0x001A0000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (SD8)
-            {
-                Name (_SUN, 0x1B)  // _SUN: Slot User Number
-                Name (_ADR, 0x001B0000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (SE0)
-            {
-                Name (_SUN, 0x1C)  // _SUN: Slot User Number
-                Name (_ADR, 0x001C0000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (SE8)
-            {
-                Name (_SUN, 0x1D)  // _SUN: Slot User Number
-                Name (_ADR, 0x001D0000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (SF0)
-            {
-                Name (_SUN, 0x1E)  // _SUN: Slot User Number
-                Name (_ADR, 0x001E0000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Device (SF8)
-            {
-                Name (_SUN, 0x1F)  // _SUN: Slot User Number
-                Name (_ADR, 0x001F0000)  // _ADR: Address
-                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
-                {
-                    PCEJ (BSEL, _SUN)
-                }
-            }
-
-            Method (DVNT, 2, NotSerialized)
-            {
-                If ((Arg0 & 0x10))
-                {
-                    Notify (S20, Arg1)
-                }
-
-                If ((Arg0 & 0x20))
-                {
-                    Notify (S28, Arg1)
-                }
-
-                If ((Arg0 & 0x40))
-                {
-                    Notify (S30, Arg1)
-                }
-
-                If ((Arg0 & 0x80))
-                {
-                    Notify (S38, Arg1)
-                }
-
-                If ((Arg0 & 0x0100))
-                {
-                    Notify (S40, Arg1)
-                }
-
-                If ((Arg0 & 0x0200))
-                {
-                    Notify (S48, Arg1)
-                }
-
-                If ((Arg0 & 0x0400))
-                {
-                    Notify (S50, Arg1)
-                }
-
-                If ((Arg0 & 0x0800))
-                {
-                    Notify (S58, Arg1)
-                }
-
-                If ((Arg0 & 0x1000))
-                {
-                    Notify (S60, Arg1)
-                }
-
-                If ((Arg0 & 0x2000))
-                {
-                    Notify (S68, Arg1)
-                }
-
-                If ((Arg0 & 0x4000))
-                {
-                    Notify (S70, Arg1)
-                }
-
-                If ((Arg0 & 0x8000))
-                {
-                    Notify (S78, Arg1)
-                }
-
-                If ((Arg0 & 0x00010000))
-                {
-                    Notify (S80, Arg1)
-                }
-
-                If ((Arg0 & 0x00020000))
-                {
-                    Notify (S88, Arg1)
-                }
-
-                If ((Arg0 & 0x00040000))
-                {
-                    Notify (S90, Arg1)
-                }
-
-                If ((Arg0 & 0x00080000))
-                {
-                    Notify (S98, Arg1)
-                }
-
-                If ((Arg0 & 0x00100000))
-                {
-                    Notify (SA0, Arg1)
-                }
-
-                If ((Arg0 & 0x00200000))
-                {
-                    Notify (SA8, Arg1)
-                }
-
-                If ((Arg0 & 0x00400000))
-                {
-                    Notify (SB0, Arg1)
-                }
-
-                If ((Arg0 & 0x00800000))
-                {
-                    Notify (SB8, Arg1)
-                }
-
-                If ((Arg0 & 0x01000000))
-                {
-                    Notify (SC0, Arg1)
-                }
-
-                If ((Arg0 & 0x02000000))
-                {
-                    Notify (SC8, Arg1)
-                }
-
-                If ((Arg0 & 0x04000000))
-                {
-                    Notify (SD0, Arg1)
-                }
-
-                If ((Arg0 & 0x08000000))
-                {
-                    Notify (SD8, Arg1)
-                }
-
-                If ((Arg0 & 0x10000000))
-                {
-                    Notify (SE0, Arg1)
-                }
-
-                If ((Arg0 & 0x20000000))
-                {
-                    Notify (SE8, Arg1)
-                }
-
-                If ((Arg0 & 0x40000000))
-                {
-                    Notify (SF0, Arg1)
-                }
-
-                If ((Arg0 & 0x80000000))
-                {
-                    Notify (SF8, Arg1)
-                }
-            }
-
             Method (PCNT, 0, NotSerialized)
             {
-                BNUM = Zero
-                DVNT (PCIU, One)
-                DVNT (PCID, 0x03)
                 ^S18.PCNT ()
             }
         }
     }
 }

Signed-off-by: Ani Sinha <[email protected]>
Acked-by: Igor Mammedov <[email protected]>
Message-Id: <20200918084111[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

tests/acpi: add new unit test to test hotplug off/on feature on the root pci bus

Ability to turn hotplug off on the pci root bus for i440fx was added in commit:
3d7e78aa7777f0 ("Introduce a new flag for i440fx to disable PCI hotplug on the
root bus")

This change adds a unit test in order to test this feature.

Signed-off-by: Ani Sinha <[email protected]>
Reviewed-by: Igor Mammedov <[email protected]>
Message-Id: <20200918084111[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

tests/acpi: mark addition of table DSDT.roothp for unit testing root pci hotplug

A new binary acpi table tests/data/acpi/pc/DSDT.roothp is added in order to
unit test the feature flag that can disable/enable root pci bus hotplug on
i440fx. This feature was added with the commit:
3d7e78aa7777f0 ("Introduce a new flag for i440fx to disable PCI hotplug on
the root bus")

This change documents the fact that this new file addition was made as a part
of the unit test change.

Signed-off-by: Ani Sinha <[email protected]>
Reviewed-by: Igor Mammedov <[email protected]>
Message-Id: <20200918084111[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

vhost-user: save features of multiqueues if chardev is closed

Fore-commit(c6beefd674) only saves features of queue0,
this makes wrong features of other queues in multiqueues
situation.
For examples:
  qemu-system-aarch64 ... \
  -chardev socket,id=charnet0,path=/var/run/vhost_sock \
  -netdev vhost-user,chardev=charnet0,queues=2,id=hostnet0 \
  ...
There are two queues in nic assocated with one chardev.
When chardev is reconnected, it is necessary to save and
restore features of all queues.

Signed-of-by: Haibin Zhang <[email protected]>
Message-Id: <46CBC206-E0CA-4249-81CD-10F75DA30441@tencent.com>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

qemu-options: document SMBIOS type 11 settings

Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Signed-off-by: Daniel P. Berrangé <[email protected]>
Message-Id: <20200923133804.2089190[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

hw/smbios: report error if table size is too large

The SMBIOS 2.1 entry point uses a uint16 data type for reporting the
total length of the tables. If the user passes -smbios configuration to
QEMU that causes the table size to exceed this limit then various bad
behaviours result, including

 - firmware hangs in an infinite loop
 - firmware triggers a KVM crash on bad memory access
 - firmware silently discards user's SMBIOS data replacing it with
   a generic data set.

Limiting the size to 0xffff in QEMU avoids triggering most of these
problems. There is a remaining bug in SeaBIOS which tries to prepend its
own data for table 0, and does not check whether there is sufficient
space before attempting this.

Reviewed-by: Igor Mammedov <[email protected]>
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Signed-off-by: Daniel P. Berrangé <[email protected]>
Message-Id: <20200923133804.2089190[email protected]>
Tested-by: Laszlo Ersek <[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

hw/smbios: support loading OEM strings values from a file

Some applications want to pass quite large values for the OEM strings
entries. Rather than having huge strings on the command line, it would
be better to load them from a file, as supported with -fw_cfg.

This introduces the "path" parameter allowing for:

  $ echo -n "thisthing" > mydata.txt
  $ qemu-system-x86_64 \
    -smbios type=11,value=something \
    -smbios type=11,path=mydata.txt \
    -smbios type=11,value=somemore \
    ...other args...

Now in the guest

$ dmidecode -t 11
Getting SMBIOS data from sysfs.
SMBIOS 2.8 present.

Handle 0x0E00, DMI type 11, 5 bytes
OEM Strings
String 1: something
String 2: thisthing
String 3: somemore

Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Signed-off-by: Daniel P. Berrangé <[email protected]>
Message-Id: <20200923133804.2089190[email protected]>
Tested-by: Laszlo Ersek <[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

tests: acpi: update acpi blobs with new AML

here is diff against tests/data/acpi/q35/DSDT
for currently shipped ovmf binary.
(once firmware blob is updated, it will negotiate CPU hotplug
feature which will ad extra hunk sending SMI and Q35 tests will
need to be updated), but otherwise diff shows new CPU hotplug
AML that is shared between q35 and pc machines.

             Method (CSCN, 0, Serialized)
             {
                 Acquire (\_SB.PCI0.PRES.CPLK, 0xFFFF)
-                Local0 = One
-                While ((Local0 == One))
-                {
-                    Local0 = Zero
-                    \_SB.PCI0.PRES.CCMD = Zero
-                    If ((\_SB.PCI0.PRES.CINS == One))
+                Name (CNEW, Package (0xFF){})
+                Local3 = Zero
+                Local4 = One
+                While ((Local4 == One))
+                {
+                    Local4 = Zero
+                    Local0 = One
+                    Local1 = Zero
+                    While (((Local0 == One) && (Local3 < One)))
                     {
-                        CTFY (\_SB.PCI0.PRES.CDAT, One)
-                        \_SB.PCI0.PRES.CINS = One
-                        Local0 = One
+                        Local0 = Zero
+                        \_SB.PCI0.PRES.CSEL = Local3
+                        \_SB.PCI0.PRES.CCMD = Zero
+                        If ((\_SB.PCI0.PRES.CDAT < Local3))
+                        {
+                            Break
+                        }
+
+                        If ((Local1 == 0xFF))
+                        {
+                            Local4 = One
+                            Break
+                        }
+
+                        Local3 = \_SB.PCI0.PRES.CDAT
+                        If ((\_SB.PCI0.PRES.CINS == One))
+                        {
+                            CNEW [Local1] = Local3
+                            Local1++
+                            Local0 = One
+                        }
+                        ElseIf ((\_SB.PCI0.PRES.CRMV == One))
+                        {
+                            CTFY (Local3, 0x03)
+                            \_SB.PCI0.PRES.CRMV = One
+                            Local0 = One
+                        }
+
+                        Local3++
                     }
-                    ElseIf ((\_SB.PCI0.PRES.CRMV == One))
+
+                    Local2 = Zero
+                    While ((Local2 < Local1))
                     {
-                        CTFY (\_SB.PCI0.PRES.CDAT, 0x03)
-                        \_SB.PCI0.PRES.CRMV = One
-                        Local0 = One
+                        Local3 = DerefOf (CNEW [Local2])
+                        CTFY (Local3, One)
+                        Debug = Local3
+                        \_SB.PCI0.PRES.CSEL = Local3
+                        \_SB.PCI0.PRES.CINS = One
+                        Local2++
                     }
                 }

Signed-off-by: Igor Mammedov <[email protected]>
Message-Id: <20200923094650.1301166[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

x68: acpi: trigger SMI before sending hotplug Notify event to OSPM

In case firmware has negotiated CPU hotplug SMI feature, generate
AML to describe SMI IO port region and send SMI to firmware
on each CPU hotplug SCI in case new CPUs were hotplugged.

Since new CPUs can be hotplugged while CPU_SCAN_METHOD is running
we can't send SMI before new CPUs are fetched from QEMU as it
could cause sending Notify to a CPU that firmware hasn't seen yet.
So fetch new CPUs into local cache first, then send SMI and
after that send Notify events to cached CPUs. This should ensure
that Notify is sent only to CPUs which were processed by firmware
first.
Any CPUs that were hotplugged after caching will be processed
by the next CPU_SCAN_METHOD, when pending SCI is handled.

Signed-off-by: Igor Mammedov <[email protected]>
Reviewed-by: Laszlo Ersek <[email protected]>
Tested-by: Laszlo Ersek <[email protected]>
Message-Id: <20200923094650.1301166[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

x86: acpi: introduce the PCI0.SMI0 ACPI device

When CPU hotplug with SMI has been negotiated, describe the SMI
register block in the DSDT. Pass the ACPI name of the SMI control
register to build_cpus_aml(), so that CPU_SCAN_METHOD can access the
register in the next patch.

Signed-off-by: Igor Mammedov <[email protected]>
Reviewed-by: Laszlo Ersek <[email protected]>
Tested-by: Laszlo Ersek <[email protected]>
Message-Id: <20200923094650.1301166[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

x86: acpi: introduce AcpiPmInfo::smi_on_cpuhp

Translate the "CPU hotplug with SMI" feature bit, from the property
added in the last patch, to a dedicated boolean in AcpiPmInfo.

Signed-off-by: Igor Mammedov <[email protected]>
Reviewed-by: Laszlo Ersek <[email protected]>
Tested-by: Laszlo Ersek <[email protected]>
Message-Id: <20200923094650.1301166[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

x86: ich9: expose "smi_negotiated_features" as a QOM property

Expose the "smi_negotiated_features" field of ICH9LPCState as
a QOM property.

Signed-off-by: Igor Mammedov <[email protected]>
Reviewed-by: Laszlo Ersek <[email protected]>
Tested-by: Laszlo Ersek <[email protected]>
Message-Id: <20200923094650.1301166[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

tests: acpi: mark to be changed tables in bios-tables-test-allowed-diff

... to let tests pass until binary blobs are updated with new AML

Signed-off-by: Igor Mammedov <[email protected]>
Message-Id: <20200923094650.1301166[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

acpi: add aml_land() and aml_break() primitives

Signed-off-by: Igor Mammedov <[email protected]>
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Reviewed-by: Laszlo Ersek <[email protected]>
Tested-by: Laszlo Ersek <[email protected]>
Message-Id: <20200923094650.1301166[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

x86: cpuhp: refuse cpu hot-unplug request earlier if not supported

CPU hot-unplug with SMM requires firmware participation to prevent
guest crash (i.e. CPU can be removed only after OS _and_ firmware
were prepared for the action).
Previous patches introduced ICH9_LPC_SMI_F_CPU_HOT_UNPLUG_BIT
feature bit, which is advertised by firmware when it has support
for CPU hot-unplug. Use it to check if guest is able to handle
unplug and make device_del fail gracefully if hot-unplug feature
hasn't been negotiated.

Signed-off-by: Igor Mammedov <[email protected]>
Tested-by: Laszlo Ersek <[email protected]>
Reviewed-by: Laszlo Ersek <[email protected]>
Message-Id: <20200923094650.1301166[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

x86: cpuhp: prevent guest crash on CPU hotplug when broadcast SMI is in use

There were reports of guest crash on CPU hotplug, when using q35 machine
type and OVMF with SMM, due to hotplugged CPU trying to process SMI at
default SMI handler location without it being relocated by firmware first.

Fix it by refusing hotplug if firmware hasn't negotiated CPU hotplug with
SMI support while SMI broadcast is in use.

Signed-off-by: Igor Mammedov <[email protected]>
Reviewed-by: Laszlo Ersek <[email protected]>
Tested-by: Laszlo Ersek <[email protected]>
Message-Id: <20200923094650.1301166[email protected]>
Tested-by: Laszlo Ersek <[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

x86: lpc9: let firmware negotiate 'CPU hotplug with SMI' features

It will allow firmware to notify QEMU that firmware requires SMI
being triggered on CPU hot[un]plug, so that it would be able to account
for hotplugged CPU and relocate it to new SMM base and/or safely remove
CPU on unplug.

Using negotiated features, follow up patches will insert SMI upcall
into AML code, to make sure that firmware processes hotplug before
guest OS would attempt to use new CPU.

Signed-off-by: Igor Mammedov <[email protected]>
Reviewed-by: Laszlo Ersek <[email protected]>
Tested-by: Laszlo Ersek <[email protected]>
Message-Id: <20200923094650.1301166[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

virtio: update MemoryRegionCaches when guest set bad features

Current the 'virtio_set_features' only update the 'MemorRegionCaches'
when the 'virtio_set_features_nocheck' return '0' which means it is
not bad features. However the guest can still trigger the access of the
used vring after set bad features. In this situation it will cause assert
failure in 'ADDRESS_SPACE_ST_CACHED'.

Buglink: https://bugs.launchpad.net/qemu/+bug/1890333
Fixes: db812c4073c7 ("virtio: update MemoryRegionCaches when guest negotiates features")
Reported-by: Alexander Bulekov <[email protected]>
Signed-off-by: Li Qiang <[email protected]>
Message-Id: <20200919082706[email protected]>
Reviewed-by: Paolo Bonzini <[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

vhost-vsock-ccw: force virtio version 1

virtio-vsock was introduced after the release of VIRTIO 1.0
specifications, so it should be 'modern-only'.

This patch forces virtio version 1 as done for vhost-vsock-pci.

To avoid migration issues, we force virtio version 1 only when
legacy check is enabled in the new machine types (>= 5.1).

Cc: [email protected]
Suggested-by: Cornelia Huck <[email protected]>
Reviewed-by: Cornelia Huck <[email protected]>
Signed-off-by: Stefano Garzarella <[email protected]>
Message-Id: <20200921122506[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

vhost-user-vsock-pci: force virtio version 1

Commit 9b3a35ec82 ("virtio: verify that legacy support is not
accidentally on") added a safety check that requires to set
'disable-legacy=on' on vhost-user-vsock-pci device:

    $ ./qemu-system-x86_64 ... \
    -chardev socket,id=char0,reconnect=0,path=/tmp/vhost4.socket \
    -device vhost-user-vsock-pci,chardev=char0
        qemu-system-x86_64: -device vhost-user-vsock-pci,chardev=char0:
        device is modern-only, use disable-legacy=on

virtio-vsock was introduced after the release of VIRTIO 1.0
specifications, so it should be 'modern-only'.

This patch forces virtio version 1 and removes the 'transitional_name'
property, as done for vhost-vsock-pci, removing the need to specify
'disable-legacy=on' on vhost-user-vsock-pci device.

Cc: [email protected]
Suggested-by: Cornelia Huck <[email protected]>
Reviewed-by: Cornelia Huck <[email protected]>
Signed-off-by: Stefano Garzarella <[email protected]>
Message-Id: <20200921122506[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

vhost-vsock-pci: force virtio version 1

Commit 9b3a35ec82 ("virtio: verify that legacy support is not
accidentally on") added a safety check that requires to set
'disable-legacy=on' on vhost-vsock-pci device:

    $ ./qemu-system-x86_64 ... -device vhost-vsock-pci,guest-cid=5
        qemu-system-x86_64: -device vhost-vsock-pci,guest-cid=5:
        device is modern-only, use disable-legacy=on

virtio-vsock was introduced after the release of VIRTIO 1.0
specifications, so it should be 'modern-only'.
In addition Cornelia verified that forcing a legacy mode on
vhost-vsock-pci device using x86-64 host and s390x guest, so with
different endianness, produces strange behaviours.

This patch forces virtio version 1 and removes the 'transitional_name'
property removing the need to specify 'disable-legacy=on' on
vhost-vsock-pci device.

To avoid migration issues, we force virtio version 1 only when
legacy check is enabled in the new machine types (>= 5.1).

As the transitional device name is not commonly used, we do not
provide compatibility handling for it.

Cc: [email protected]
Reported-by: Qian Cai <[email protected]>
Reported-by: Qinghua Cheng <[email protected]>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1868449
Suggested-by: Cornelia Huck <[email protected]>
Reviewed-by: Cornelia Huck <[email protected]>
Signed-off-by: Stefano Garzarella <[email protected]>
Message-Id: <20200921122506[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

virtio: skip legacy support check on machine types less than 5.1

Commit 9b3a35ec82 ("virtio: verify that legacy support is not accidentally
on") added a check that returns an error if legacy support is on, but the
device does not support legacy.

Unfortunately some devices were wrongly declared legacy capable even if
they were not (e.g vhost-vsock).

To avoid migration issues, we add a virtio-device property
(x-disable-legacy-check) to skip the legacy error, printing a warning
instead, for machine types < 5.1.

Cc: [email protected]
Fixes: 9b3a35ec82 ("virtio: verify that legacy support is not accidentally on")
Suggested-by: Dr. David Alan Gilbert <[email protected]>
Suggested-by: Cornelia Huck <[email protected]>
Reviewed-by: Cornelia Huck <[email protected]>
Signed-off-by: Stefano Garzarella <[email protected]>
Message-Id: <20200921122506[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

configure: Fix build dependencies with vhost-vdpa.

Following the same logic as for vhost-net-user and vhost-kernel,
enable vhost-net if vhost-net-vdpa is enabled and vhost-net is not
explicitly disabled.
See 299e6f19b3e2 ("vhost-net: revamp configure logic")

Autoselect VHOST if VHOST_VDPA is set
See 21c6b0c87e85 ("configure: simplify vhost condition with Kconfig")
See 2becc36a3e53 ("meson: infrastructure for building emulators"

Problems can be triggered using;
... --enable-vhost-vdpa --disable-vhost-user --disable-vhost-kernel ...

Fixes: 108a64818e69 ("vhost-vdpa: introduce vhost-vdpa backend")
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Laurent Vivier <[email protected]>
Message-Id: <20200924210023[email protected]>
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Acked-by: Paolo Bonzini <[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

vhost-vdpa: add trace-events

Add trace functions in vhost-vdpa.c.

All traces from this file can be enabled with '-trace vhost_vdpa*'.

Acked-by: Stefan Hajnoczi <[email protected]>
Signed-off-by: Laurent Vivier <[email protected]>
Message-Id: <20200925091055[email protected]>
Acked-by: Jason Wang <[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

util/hexdump: introduce qemu_hexdump_line()

Dumping one line of hexadecimal/ASCII from a buffer is often needed.
Move this part from qemu_hexdump() and use it

Acked-by: Stefan Hajnoczi <[email protected]>
Signed-off-by: Laurent Vivier <[email protected]>
Message-Id: <20200925091055[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

virtio-pmem-pci: force virtio version 1

 Qemu fails with below error when trying to run with virtio pmem:

 (qemu) qemu-system-x86_64: -device virtio-pmem-pci,memdev=mem1,id=nv1:
  device is modern-only, use disable-legacy=on

 This patch fixes this by forcing virtio 1 with virtio-pmem.

fixes: adf0748a49 ("virtio-pci: Proxy for virtio-pmem")
Signed-off-by: Pankaj Gupta <[email protected]>
Message-Id: <20200925102251[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Acked-by: Cornelia Huck <[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

virtio-iommu-pci: force virtio version 1

Commit 9b3a35ec82 ("virtio: verify that legacy support is not
accidentally on") added a safety check that requires to set
'disable-legacy=on' on virtio-iommu-pci:

qemu-system-aarch64: -device virtio-iommu-pci: device is modern-only,
use disable-legacy=on

virtio-iommu was introduced after the release of VIRTIO 1.0
specifications, so it should be 'modern-only'.

This patch forces virtio version 1 and removes the 'transitional_name'
property removing the need to specify 'disable-legacy=on' on
virtio-iommu-pci device.

Cc: [email protected]
Signed-off-by: Eric Auger <[email protected]>
Reviewed-by: Cornelia Huck <[email protected]>
Message-Id: <20200908193309[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

virtio-iommu: Check gtrees are non null before destroying them

If realize fails, domains and endpoints trees may be NULL. On
unrealize(), this produces assertions:

"GLib: g_tree_destroy: assertion 'tree != NULL' failed"

Check that the trees are non NULL before destroying them.

Cc: [email protected]
Signed-off-by: Eric Auger <[email protected]>
Reviewed-by: Cornelia Huck <[email protected]>
Message-Id: <20200908193309[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

cphp: remove deprecated cpu-add command(s)

These were deprecated since 4.0, remove both HMP and QMP variants.

Users should use device_add command instead. To get list of
possible CPUs and options, use 'info hotpluggable-cpus' HMP
or query-hotpluggable-cpus QMP command.

Signed-off-by: Igor Mammedov <[email protected]>
Reviewed-by: Thomas Huth <[email protected]>
Acked-by: Dr. David Alan Gilbert <[email protected]>
Reviewed-by: Michal Privoznik <[email protected]>
Acked-by: Cornelia Huck <[email protected]>
Message-Id: <20200915120403.1074579[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

tests/qtest/vhost-user-test: prepare the tests for adding new dev class

For now only vhost-user-net device is supported by the test. Other
vhost-user devices are not tested. As a first step make source code
refactoring so new devices can reuse the same test routines. To make
this provide a new vhost_user_ops structure with the methods to
initialize device, its command line or make a proper vhost-user
responses.

Signed-off-by: Dima Stepanov <[email protected]>
Reviewed-by: Raphael Norwitz <[email protected]>
Message-Id: <a48b60fb96fef230b75fff72a2d77040dcb5ef7c.1599813294[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

vhost: check queue state in the vhost_dev_set_log routine

If the vhost-user-blk daemon provides only one virtqueue, but device was
added with several queues, then QEMU will send more VHOST-USER command
than expected by daemon side. The vhost_virtqueue_start() routine
handles such case by checking the return value from the
virtio_queue_get_desc_addr() function call. Add the same check to the
vhost_dev_set_log() routine.

Signed-off-by: Dima Stepanov <[email protected]>
Reviewed-by: Raphael Norwitz <[email protected]>
Message-Id: <6232946d5af09e9775076645909964a6539b8ab5.1599813294[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

vhost: recheck dev state in the vhost_migration_log routine

vhost-user devices can get a disconnect in the middle of the VHOST-USER
handshake on the migration start. If disconnect event happened right
before sending next VHOST-USER command, then the vhost_dev_set_log()
call in the vhost_migration_log() function will return error. This error
will lead to the assert() and close the QEMU migration source process.
For the vhost-user devices the disconnect event should not break the
migration process, because:
  - the device will be in the stopped state, so it will not be changed
    during migration
  - if reconnect will be made the migration log will be reinitialized as
    part of reconnect/init process:
    #0  vhost_log_global_start (listener=0x563989cf7be0)
    at hw/virtio/vhost.c:920
    #1  0x000056398603d8bc in listener_add_address_space (listener=0x563989cf7be0,
        as=0x563986ea4340 <address_space_memory>)
    at softmmu/memory.c:2664
    #2  0x000056398603dd30 in memory_listener_register (listener=0x563989cf7be0,
        as=0x563986ea4340 <address_space_memory>)
    at softmmu/memory.c:2740
    #3  0x0000563985fd6956 in vhost_dev_init (hdev=0x563989cf7bd8,
        opaque=0x563989cf7e30, backend_type=VHOST_BACKEND_TYPE_USER,
        busyloop_timeout=0)
    at hw/virtio/vhost.c:1385
    #4  0x0000563985f7d0b8 in vhost_user_blk_connect (dev=0x563989cf7990)
    at hw/block/vhost-user-blk.c:315
    #5  0x0000563985f7d3f6 in vhost_user_blk_event (opaque=0x563989cf7990,
        event=CHR_EVENT_OPENED)
    at hw/block/vhost-user-blk.c:379
Update the vhost-user-blk device with the internal started_vu field which
will be used for initialization (vhost_user_blk_start) and clean up
(vhost_user_blk_stop). This additional flag in the VhostUserBlk structure
will be used to track whether the device really needs to be stopped and
cleaned up on a vhost-user level.
The disconnect event will set the overall VHOST device (not vhost-user) to
the stopped state, so it can be used by the general vhost_migration_log
routine.
Such approach could be propogated to the other vhost-user devices, but
better idea is just to make the same connect/disconnect code for all the
vhost-user devices.

This migration issue was slightly discussed earlier:
  - https://lists.gnu.org/archive/html/qemu-devel/2020-05/msg01509.html
  - https://lists.gnu.org/archive/html/qemu-devel/2020-05/msg05241.html

Signed-off-by: Dima Stepanov <[email protected]>
Reviewed-by: Raphael Norwitz <[email protected]>
Message-Id: <9fbfba06791a87813fcee3e2315f0b904cc6789a.1599813294[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

pc: fix auto_enable_numa_with_memhp/auto_enable_numa_with_memdev for the 5.0 machine

Unfortunately, a typo sneeked in: we want to set
auto_enable_numa_with_memdev to false, not auto_enable_numa_with_memhp.

Cc: [email protected] # v5.1
Fixes: 195784a0cfad (numa: Auto-enable NUMA when any memory devices are possible)
Reported-by: Dr. David Alan Gilbert <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Eduardo Habkost <[email protected]>
Cc: "Michael S. Tsirkin" <[email protected]>
Signed-off-by: David Hildenbrand <[email protected]>
Message-Id: <20200820094828[email protected]>
Reviewed-by: Dr. David Alan Gilbert <[email protected]>
Reviewed-by: Igor Mammedov <[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

virtio-mem: detach the element from the virtqueue when error occurs

If error occurs while processing the virtio request we should call
'virtqueue_detach_element' to detach the element from the virtqueue
before free the elem.

Signed-off-by: Li Qiang <[email protected]>
Message-Id: <20200816142245[email protected]>
Fixes: 910b25766b ("virtio-mem: Paravirtualized memory hot(un)plug")
Acked-by: David Hildenbrand <[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

vhost-vdpa: batch updating IOTLB mappings

To speed up the memory mapping updating between vhost-vDPA and vDPA
device driver, this patch passes the IOTLB batching flags via IOTLB
API. Two new flags was introduced, VHOST_IOTLB_BATCH_BEGIN is a hint
that a bathced IOTLB updating may be initiated from the
userspace. VHOST_IOTLB_BATCH_END is a hint that userspace has finished
the updating:

VHOST_IOTLB_BATCH_BEGIN
VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE
...
VHOST_IOTLB_BATCH_END

Vhost-vDPA can then know that all mappings has been set and can do
optimization like passing all the mappings to the vDPA device driver.

Signed-off-by: Jason Wang <[email protected]>
Message-Id: <20200907104903[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

vhost: switch to use IOTLB v2 format

This patch tries to switch to use new kernel IOTLB format V2. Previous
version may have inconsistent ABI between 32bit and 64bit machines
because of the hole after type field. Refer kernel commit
("429711aec282 vhost: switch to use new message format") for more
information.

To enable this feature, qemu need to use a new ioctl
VHOST_SET_BACKEND_FEATURE with VHOST_BACKEND_F_IOTLB_MSG_V2 bit. A new
vhost setting backend features ops was introduced. And when we try to
set features for vhost dev, we will examine the support of new IOTLB
format and enable it. This process is total transparent to guest,
which means we can have different IOTLB message type in src and dst
during migration.

The conversion of IOTLB message is straightforward, just check the
type and behave accordingly.

Signed-off-by: Jason Wang <[email protected]>
Message-Id: <20200907104903[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

linux headers: sync to 5.9-rc4

Update against Linux 5.9-rc4.

Cc: Cornelia Huck <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Signed-off-by: Jason Wang <[email protected]>
Message-Id: <20200907104903[email protected]>
Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>

Merge remote-tracking branch 'remotes/alistair/tags/pull-register-20200927' into staging

Two small patches. One with a fix for the register API instance_size
and one for removing unused address variables from load_elf.

# gpg: Signature made Sun 27 Sep 2020 14:45:06 BST
# gpg:                using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <[email protected]>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8  CE8F 21E1 0D29 DF97 7054

* remotes/alistair/tags/pull-register-20200927:
  core/register: Specify instance_size in the TypeInfo
  load_elf: Remove unused address variables from callers

Signed-off-by: Peter Maydell <[email protected]>

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging

Trivial Patches Pull request 20200928

# gpg: Signature made Mon 28 Sep 2020 10:15:00 BST
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "[email protected]"
# gpg: Good signature from "Laurent Vivier <[email protected]>" [full]
# gpg:                 aka "Laurent Vivier <[email protected]>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <[email protected]>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-5.2-pull-request:
  docs/system/deprecated: Move lm32 and unicore32 to the right section
  migration/multifd: Remove superfluous semicolons
  timer: Fix timer_mod_anticipate() documentation
  vhost-vdpa: remove useless variable
  Add *.pyc back to the .gitignore file
  virtio: vdpa: omit check return of g_malloc
  meson: fix static flag summary
  vhost-vdpa: fix indentation in vdpa_ops

Signed-off-by: Peter Maydell <[email protected]>

core/register: Specify instance_size in the TypeInfo

Reported-by: Eduardo Habkost <[email protected]>
Signed-off-by: Alistair Francis <[email protected]>
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Message-Id: <4cf1beb7dafb9143c261d266557d3173bf160524.1598376594[email protected]>

load_elf: Remove unused address variables from callers

Several callers of load_elf() pass pointers for lowaddr and highaddr
parameters which are then not used for anything. This may stem from a
misunderstanding that load_elf need a value here but in fact it can
take NULL to ignore these values. Remove such unused variables and
pass NULL instead from callers that don't need these.

Signed-off-by: BALATON Zoltan <[email protected]>
Reviewed-by: David Gibson <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
Acked-by: David Gibson <[email protected]>
Acked-by: Max Filippov <[email protected]>
Message-Id: <20200705174020.BDD0174633F@zero.eik.bme.hu>
Signed-off-by: Alistair Francis <[email protected]>

Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20200925a' into staging

Migration and virtiofsd pull

Chuan Zheng's Dirtyrate and TLS changes, with small fixes from Dov and
Luarent.
Small virtiofs changes from Harry, Stefan, Vivek and Jiachen.
One HMP/monitor rework from me.

# gpg: Signature made Fri 25 Sep 2020 13:03:50 BST
# gpg:                using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <[email protected]>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20200925a: (26 commits)
  virtiofsd: Add -o allow_direct_io|no_allow_direct_io options
  virtiofsd: Used glib "shared" thread pool
  virtiofsd: document cache=auto default
  monitor: Use LOCK_GUARD macros
  migration/tls: add trace points for multifd-tls
  migration/tls: add support for multifd tls-handshake
  migration/tls: extract cleanup function for common-use
  migration/tls: add tls_hostname into MultiFDSendParams
  migration/tls: extract migration_tls_client_create for common-use
  migration/tls: save hostname into MigrationState
  migration: increase max-bandwidth to 128 MiB/s (1 Gib/s)
  migration: Truncate state file in xen-save-devices-state
  migration/dirtyrate: Add trace_calls to make it easier to debug
  migration/dirtyrate: Implement qmp_cal_dirty_rate()/qmp_get_dirty_rate() function
  migration/dirtyrate: Implement calculate_dirtyrate() function
  migration/dirtyrate: Implement set_sample_page_period() and is_sample_period_valid()
  migration/dirtyrate: skip sampling ramblock with size below MIN_RAMBLOCK_SIZE
  migration/dirtyrate: Compare page hash results for recorded sampled page
  migration/dirtyrate: Record hash results for each sampled page
  migration/dirtyrate: move RAMBLOCK_FOREACH_MIGRATABLE into ram.h
  ...

Signed-off-by: Peter Maydell <[email protected]>

virtiofsd: Add -o allow_direct_io|no_allow_direct_io options

Due to the commit 65da4539803373ec4eec97ffc49ee90083e56efd, the O_DIRECT
open flag of guest applications will be discarded by virtiofsd. While
this behavior makes it consistent with the virtio-9p scheme when guest
applications use direct I/O, we no longer have any chance to bypass the
host page cache.

Therefore, we add a flag 'allow_direct_io' to lo_data. If '-o
 no_allow_direct_io' option is added, or none of '-o allow_direct_io' or
 '-o no_allow_direct_io' is added, the 'allow_direct_io' will be set to
 0, and virtiofsd discards O_DIRECT as before. If '-o allow_direct_io'
is added to the starting command-line, 'allow_direct_io' will be set to
1, so that the O_DIRECT flags will be retained and host page cache can
be bypassed.

Signed-off-by: Jiachen Zhang <[email protected]>
Reviewed-by: Stefan Hajnoczi <[email protected]>
Message-Id: <20200824105957[email protected]>
Signed-off-by: Dr. David Alan Gilbert <[email protected]>

virtiofsd: Used glib "shared" thread pool

glib offers thread pools and it seems to support "exclusive" and "shared"
thread pools.

https://developer.gnome.org/glib/stable/glib-Thread-Pools.html#g-thread-pool-new

Currently we use "exlusive" thread pools but its performance seems to be
poor. I tried using "shared" thread pools and performance seems much
better. I posted performance results here.

https://www.redhat.com/archives/virtio-fs/2020-September/msg00080.html

So lets switch to shared thread pools. We can think of making it optional
once somebody can show in what cases exclusive thread pools offer better
results. For now, my simple performance tests across the board see
better results with shared thread pools.

Signed-off-by: Vivek Goyal <[email protected]>
Message-Id: <20200921213216[email protected]>
Reviewed-by: Stefan Hajnoczi <[email protected]>
Signed-off-by: Dr. David Alan Gilbert <[email protected]>
  With seccomp fix from Miklos

virtiofsd: document cache=auto default

The virtiofsd --help output documents the cache=auto default value but
the man page does not. Fix this.

Signed-off-by: Harry G. Coin <[email protected]>
Signed-off-by: Stefan Hajnoczi <[email protected]>
Message-Id: <20200916112250[email protected]>
Reviewed-by: Dr. David Alan Gilbert <[email protected]>
Signed-off-by: Dr. David Alan Gilbert <[email protected]>

monitor: Use LOCK_GUARD macros

Use the lock guard macros in monitor/misc.c - saves
a lot of unlocks in error paths, and the occasional goto.

Signed-off-by: Dr. David Alan Gilbert <[email protected]>
Message-Id: <20200922095741[email protected]>
Reviewed-by: Markus Armbruster <[email protected]>
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Signed-off-by: Dr. David Alan Gilbert <[email protected]>

migration/tls: add trace points for multifd-tls

add trace points for multifd-tls for debug.

Signed-off-by: Chuan Zheng <[email protected]>
Signed-off-by: Yan Jin <[email protected]>
Reviewed-by: Daniel P. Berrangé <[email protected]>
Message-Id: <1600139042[email protected]>
Signed-off-by: Dr. David Alan Gilbert <[email protected]>

migration/tls: add support for multifd tls-handshake

Similar like migration main thread, we need to do handshake
for each multifd thread.

Signed-off-by: Chuan Zheng <[email protected]>
Signed-off-by: Yan Jin <[email protected]>
Reviewed-by: Daniel P. Berrangé <[email protected]>
Message-Id: <1600139042[email protected]>
Signed-off-by: Dr. David Alan Gilbert <[email protected]>

migration/tls: extract cleanup function for common-use

multifd channel cleanup is need if multifd handshake failed,
let's extract it.

Signed-off-by: Chuan Zheng <[email protected]>
Signed-off-by: Yan Jin <[email protected]>
Reviewed-by: Daniel P. Berrangé <[email protected]>
Message-Id: <1600139042[email protected]>
Signed-off-by: Dr. David Alan Gilbert <[email protected]>

migration/tls: add tls_hostname into MultiFDSendParams

Since multifd creation is async with migration_channel_connect, we should
pass the hostname from MigrationState to MultiFDSendParams.

Signed-off-by: Chuan Zheng <[email protected]>
Signed-off-by: Yan Jin <[email protected]>
Message-Id: <1600139042[email protected]>
Reviewed-by: Daniel P. Berrangé <[email protected]>
Signed-off-by: Dr. David Alan Gilbert <[email protected]>

migration/tls: extract migration_tls_client_create for common-use

migration_tls_client_create will be used in multifd-tls, let's
extract it.

Signed-off-by: Chuan Zheng <[email protected]>
Signed-off-by: Yan Jin <[email protected]>
Reviewed-by: Daniel P. Berrangé <[email protected]>
Message-Id: <1600139042[email protected]>
Signed-off-by: Dr. David Alan Gilbert <[email protected]>

migration/tls: save hostname into MigrationState

hostname is need in multifd-tls, save hostname into MigrationState.

Signed-off-by: Chuan Zheng <[email protected]>
Signed-off-by: Yan Jin <[email protected]>
Message-Id: <1600139042[email protected]>
Reviewed-by: Daniel P. Berrangé <[email protected]>
Signed-off-by: Dr. David Alan Gilbert <[email protected]>

migration: increase max-bandwidth to 128 MiB/s (1 Gib/s)

max-bandwidth is set by default to 32 MiB/s (256 Mib/s)
since 2008 (5bb7910af031c).

Most of the CPUs can dirty memory faster than that now,
and this is clearly a problem with POWER where the page
size is 64 kiB and not 4 KiB.

Signed-off-by: Laurent Vivier <[email protected]>
Message-Id: <20200921144957[email protected]>
Reviewed-by: David Gibson <[email protected]>
Reviewed-by: Greg Kurz <[email protected]>
Reviewed-by: Dr. David Alan Gilbert <[email protected]>
Signed-off-by: Dr. David Alan Gilbert <[email protected]>

migration: Truncate state file in xen-save-devices-state

When running the xen-save-devices-state QMP command, if the filename
already exists it will be truncated before dumping the devices' state
into it.

Signed-off-by: Dov Murik <[email protected]>
Message-Id: <20200921094830[email protected]>
Reviewed-by: Dr. David Alan Gilbert <[email protected]>
Signed-off-by: Dr. David Alan Gilbert <[email protected]>

migration/dirtyrate: Add trace_calls to make it easier to debug

Add trace_calls to make it easier to debug

Signed-off-by: Chuan Zheng <[email protected]>
Reviewed-by: Dr. David Alan Gilbert <[email protected]>
Reviewed-by: David Edmondson <[email protected]>
Message-Id: <1600237327[email protected]>
Signed-off-by: Dr. David Alan Gilbert <[email protected]>

migration/dirtyrate: Implement qmp_cal_dirty_rate()/qmp_get_dirty_rate() function

Implement qmp_cal_dirty_rate()/qmp_get_dirty_rate() function which could be called

Signed-off-by: Chuan Zheng <[email protected]>
Message-Id: <1600237327[email protected]>
Reviewed-by: Dr. David Alan Gilbert <[email protected]>
Signed-off-by: Dr. David Alan Gilbert <[email protected]>
  atomic function fixup
  Wording fixup in migration.json based on Eric's review

migration/dirtyrate: Implement calculate_dirtyrate() function

Implement calculate_dirtyrate() function.

Signed-off-by: Chuan Zheng <[email protected]>
Signed-off-by: YanYing Zhuang <[email protected]>
Reviewed-by: Dr. David Alan Gilbert <[email protected]>
Reviewed-by: Li Qiang <[email protected]>
Message-Id: <1600237327[email protected]>
Signed-off-by: Dr. David Alan Gilbert <[email protected]>

migration/dirtyrate: Implement set_sample_page_period() and is_sample_period_valid()

Implement is_sample_period_valid() to check if the sample period is vaild and
do set_sample_page_period() to sleep specific time between sample actions.

Signed-off-by: Chuan Zheng <[email protected]>
Reviewed-by: Dr. David Alan Gilbert <[email protected]>
Reviewed-by: David Edmondson <[email protected]>
Reviewed-by: Li Qiang <[email protected]>
Message-Id: <1600237327[email protected]>
Signed-off-by: Dr. David Alan Gilbert <[email protected]>

migration/dirtyrate: skip sampling ramblock with size below MIN_RAMBLOCK_SIZE

In order to sample real RAM, skip ramblock with size below MIN_RAMBLOCK_SIZE
which is set as 128M.

Signed-off-by: Chuan Zheng <[email protected]>
Reviewed-by: David Edmondson <[email protected]>
Reviewed-by: Dr. David Alan Gilbert <[email protected]>
Reviewed-by: Li Qiang <[email protected]>
Message-Id: <1600237327[email protected]>
Signed-off-by: Dr. David Alan Gilbert <[email protected]>

migration/dirtyrate: Compare page hash results for recorded sampled page

Compare page hash results for recorded sampled page.

Signed-off-by: Chuan Zheng <[email protected]>
Signed-off-by: YanYing Zhuang <[email protected]>
Reviewed-by: Dr. David Alan Gilbert <[email protected]>
Reviewed-by: Li Qiang <[email protected]>
Message-Id: <1600237327[email protected]>
Signed-off-by: Dr. David Alan Gilbert <[email protected]>

migration/dirtyrate: Record hash results for each sampled page

Record hash results for each sampled page, crc32 is taken to calculate
hash results for each sampled length in TARGET_PAGE_SIZE.

Signed-off-by: Chuan Zheng <[email protected]>
Signed-off-by: YanYing Zhuang <[email protected]>
Reviewed-by: David Edmondson <[email protected]>
Reviewed-by: Li Qiang <[email protected]>
Message-Id: <1600237327[email protected]>
Signed-off-by: Dr. David Alan Gilbert <[email protected]>

migration/dirtyrate: move RAMBLOCK_FOREACH_MIGRATABLE into ram.h

RAMBLOCK_FOREACH_MIGRATABLE is need in dirtyrate measure,
move the existing definition up into migration/ram.h

Signed-off-by: Chuan Zheng <[email protected]>
Reviewed-by: Dr. David Alan Gilbert <[email protected]>
Reviewed-by: David Edmondson <[email protected]>
Reviewed-by: Li Qiang <[email protected]>
Message-Id: <1600237327[email protected]>
Signed-off-by: Dr. David Alan Gilbert <[email protected]>

migration/dirtyrate: Add dirtyrate statistics series functions

Add dirtyrate statistics functions to record/update dirtyrate info.

Signed-off-by: Chuan Zheng <[email protected]>
Reviewed-by: Dr. David Alan Gilbert <[email protected]>
Reviewed-by: Li Qiang <[email protected]>
Message-Id: <1600237327[email protected]>
Signed-off-by: Dr. David Alan Gilbert <[email protected]>

migration/dirtyrate: Add RamblockDirtyInfo to store sampled page info

Add RamblockDirtyInfo to store sampled page info of each ramblock.

Signed-off-by: Chuan Zheng <[email protected]>
Reviewed-by: Dr. David Alan Gilbert <[email protected]>
Reviewed-by: David Edmondson <[email protected]>
Reviewed-by: Li Qiang <[email protected]>
Message-Id: <1600237327[email protected]>
Signed-off-by: Dr. David Alan Gilbert <[email protected]>

migration/dirtyrate: add DirtyRateStatus to denote calculation status

add DirtyRateStatus to denote calculating status.

Signed-off-by: Chuan Zheng <[email protected]>
Reviewed-by: Dr. David Alan Gilbert <[email protected]>
Reviewed-by: Li Qiang <[email protected]>
Message-Id: <1600237327[email protected]>
Signed-off-by: Dr. David Alan Gilbert <[email protected]>
  atomic name fixup

migration/dirtyrate: setup up query-dirtyrate framwork

Add get_dirtyrate_thread() functions to setup query-dirtyrate
framework.

Signed-off-by: Chuan Zheng <[email protected]>
Signed-off-by: YanYing Zhuang <[email protected]>
Reviewed-by: Dr. David Alan Gilbert <[email protected]>
Reviewed-by: David Edmondson <[email protected]>
Reviewed-by: Li Qiang <[email protected]>
Message-Id: <1600237327[email protected]>
Signed-off-by: Dr. David Alan Gilbert <[email protected]>

migration: Rework migrate_send_rp_req_pages() function

We duplicated the logic of maintaining the last_rb variable at both callers of
this function.  Pass *rb pointer into the function so that we can avoid
duplicating the logic.  Also, when we have the rb pointer, it's also easier to
remove the original 2nd & 4th parameters, because both of them (name of the
ramblock when needed, or the page size) can be fetched from the ramblock
pointer too.

Reviewed-by: Dr. David Alan Gilbert <[email protected]>
Signed-off-by: Peter Xu <[email protected]>
Message-Id: <20200908203022[email protected]>
Signed-off-by: Dr. David Alan Gilbert <[email protected]>

migration: Properly destroy variables on incoming side

In migration_incoming_state_destroy(), we've got a few variables that aren't
destroyed properly, namely:

    main_thread_load_event
    postcopy_pause_sem_dst
    postcopy_pause_sem_fault
    rp_mutex

Destroy them properly.

Signed-off-by: Peter Xu <[email protected]>
Message-Id: <20200908203022[email protected]>
Reviewed-by: Dr. David Alan Gilbert <[email protected]>
Signed-off-by: Dr. David Alan Gilbert <[email protected]>

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Pull request

This includes the atomic_ -> qatomic_ rename that touches many files and is
prone to conflicts.

# gpg: Signature made Wed 23 Sep 2020 17:08:43 BST
# gpg:                using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <[email protected]>" [full]
# gpg:                 aka "Stefan Hajnoczi <[email protected]>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
  qemu/atomic.h: rename atomic_ to qatomic_
  tests: add test-fdmon-epoll
  fdmon-poll: reset npfd when upgrading to fdmon-epoll
  gitmodules: add qemu.org vbootrom submodule
  gitmodules: switch to qemu.org meson mirror
  gitmodules: switch to qemu.org qboot mirror
  docs/system: clarify deprecation schedule
  virtio-crypto: don't modify elem->in/out_sg
  virtio-blk: undo destructive iov_discard_*() operations
  util/iov: add iov_discard_undo()
  virtio: add vhost-user-fs-ccw device
  libvhost-user: handle endianness as mandated by the spec
  MAINTAINERS: add Stefan Hajnoczi as block/nvme.c maintainer

Signed-off-by: Peter Maydell <[email protected]>

Merge remote-tracking branch 'remotes/kraxel/tags/audio-20200923-pull-request' into staging

audio: various buffering fixes.
audio: build spiceaudio as module.

# gpg: Signature made Wed 23 Sep 2020 10:09:46 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <[email protected]>" [full]
# gpg:                 aka "Gerd Hoffmann <[email protected]>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <[email protected]>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/audio-20200923-pull-request:
  audio: build spiceaudio as module
  audio: remove qemu_spice_audio_init()
  audio: run downstream playback queue unconditionally
  audio: align audio_generic_write with audio_pcm_hw_run_out
  audio: remove unnecessary calls to put_buffer_in
  audio: align audio_generic_read with audio_pcm_hw_run_in
  audio/spiceaudio: always rate limit playback stream
  audio/audio: fix video playback slowdown with spiceaudio
  audio: handle buf == NULL in put_buffer_out()

Signed-off-by: Peter Maydell <[email protected]>

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

machine + QOM queue, 2020-09-22

QOM cleanups:
* Convert instance properties to class properties
  (Eduardo Habkost)
* simplify object_find_property / object_class_find_property
  (Daniel P. Berrangé)

Deprecated feature removal:
* Drop support for invalid topologies (Igor Mammedov)

# gpg: Signature made Tue 22 Sep 2020 23:25:01 BST
# gpg:                using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg:                issuer "[email protected]"
# gpg: Good signature from "Eduardo Habkost <[email protected]>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request:
  sifive_u: Register "start-in-flash" as class property
  sifive_e: Register "revb" as class property
  i440fx: Register i440FX-pcihost properties as class properties
  machine: Register "memory-backend" as class property
  xlnx-zcu102: Register properties as class properties
  cpu/core: Register core-id and nr-threads as class properties
  s390x: Register all CPU properties as class properties
  cryptodev-backend: Register "chardev" as class property
  cryptodev-vhost-user: Register "chardev" as class property
  smp: drop support for deprecated (invalid topologies)
  qom: simplify object_find_property / object_class_find_property

Signed-off-by: Peter Maydell <[email protected]>

docs/system/deprecated: Move lm32 and unicore32 to the right section

lm32 and unicore32 are softmmut targets, and not linux-user targets.

Signed-off-by: Thomas Huth <[email protected]>
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Message-Id: <20200923080015[email protected]>
Signed-off-by: Laurent Vivier <[email protected]>

migration/multifd: Remove superfluous semicolons

checkpatch.pl report superfluous semicolons since commit
ee0f3c09e01, but this one was missed:

  scripts/checkpatch.pl d32ca5ad798~..d32ca5ad798
  ERROR: superfluous trailing semicolon
  #498: FILE: migration/multifd.c:308:
  +    ram_counters.transferred += transferred;;
  total: 1 errors, 1 warnings, 2073 lines checked

Fixes: d32ca5ad798 ("multifd: Split multifd code into its own file")
Signed-off-by: Philippe Mathieu-Daudé <[email protected]>
Reviewed-by: Li Qiang <[email protected]>
Message-Id: <20200921040231[email protected]>
Signed-off-by: Laurent Vivier <[email protected]>

timer: Fix timer_mod_anticipate() documentation

timer_mod_anticipate() will be scaled to the timer unit,
which is not always nanosecond. Fix the documentation.

Fixes: add40e9777d ("timer: add timer_mod_anticipate*")
Signed-off-by: Philippe Mathieu-Daudé <[email protected]>
Reviewed-by: Richard Henderson <[email protected]>
Message-Id: <20200920155042[email protected]>
Signed-off-by: Laurent Vivier <[email protected]>

vhost-vdpa: remove useless variable

in vhost_vdpa_listener_region_del(), try_unmap is always true and so,
vhost_vdpa_dma_unmap() is always called. We can remove the variable

Signed-off-by: Laurent Vivier <[email protected]>
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Reviewed-by: Li Qiang <[email protected]>
Message-Id: <20200920152024[email protected]>
Signed-off-by: Laurent Vivier <[email protected]>

Add *.pyc back to the .gitignore file

Python still dumps its bytecode into the source directory, so
we should continue to ignore the *.pyc files.

Fixes: 0e72b7df4d ("Simplify the .gitignore file")
Reported-by: Peter Maydell <[email protected]>
Signed-off-by: Thomas Huth <[email protected]>
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Message-Id: <20200919101859[email protected]>
Signed-off-by: Laurent Vivier <[email protected]>

virtio: vdpa: omit check return of g_malloc

If g_malloc fails, the application will be terminated.
No need to check the return value of g_malloc.

Signed-off-by: Li Qiang <[email protected]>
Reviewed-by: Laurent Vivier <[email protected]>
Reviewed-by: Alex Bennée <[email protected]>
Message-Id: <20200819144309[email protected]>
Signed-off-by: Laurent Vivier <[email protected]>

meson: fix static flag summary

'static build:' must display value of CONFIG_STATIC rather than value of
CONFIG_TOOLS.

Signed-off-by: Laurent Vivier <[email protected]>
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Message-Id: <20200917140700[email protected]>
Signed-off-by: Laurent Vivier <[email protected]>

vhost-vdpa: fix indentation in vdpa_ops

This patch fixes wrong indentation of some vdpa_ops fields introduced
with the initial commit 108a64818e ("vhost-vdpa: introduce vhost-vdpa
backend")

Signed-off-by: Stefano Garzarella <[email protected]>
Reviewed-by: Li Qiang <[email protected]>
Reviewed-by: Laurent Vivier <[email protected]>
Message-Id: <20200916152634[email protected]>
Signed-off-by: Laurent Vivier <[email protected]>

qemu/atomic.h: rename atomic_ to qatomic_

clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:

  $ CC=clang CXX=clang++ ./configure ... && make
  ../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)

Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.

This patch was generated using:

  $ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
    sort -u >/tmp/changed_identifiers
  $ for identifier in $(</tmp/changed_identifiers); do
        sed -i "s%\<$identifier\>%q$identifier%g" \
            $(git grep -I -l "\<$identifier\>")
    done

I manually fixed line-wrap issues and misaligned rST tables.

Signed-off-by: Stefan Hajnoczi <[email protected]>
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Acked-by: Paolo Bonzini <[email protected]>
Message-Id: <20200923105646[email protected]>

Merge remote-tracking branch 'remotes/ericb/tags/pull-bitmaps-2020-09-21' into staging

bitmaps patches for 2020-09-21

- Eric Blake: Improve 'qemu-img bitmap --merge' by not opening backing images

# gpg: Signature made Tue 22 Sep 2020 01:58:31 BST
# gpg:                using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <[email protected]>" [full]
# gpg:                 aka "Eric Blake (Free Software Programmer) <[email protected]>" [full]
# gpg:                 aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2  F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-bitmaps-2020-09-21:
  qemu-img: Support bitmap --merge into backing image

Signed-off-by: Peter Maydell <[email protected]>

tests: add test-fdmon-epoll

Test aio_disable_external(), which switches from fdmon-epoll back to
fdmon-poll. This resulted in an assertion failure that was fixed in the
previous patch.

Signed-off-by: Stefan Hajnoczi <[email protected]>
Message-Id: <20200915120339[email protected]>

fdmon-poll: reset npfd when upgrading to fdmon-epoll

npfd keeps track of how many pollfds are currently being monitored. It
must be reset to 0 when fdmon_poll_wait() returns.

When npfd reaches a treshold we switch to fdmon-epoll because it scales
better.

This patch resets npfd in the case where we switch to fdmon-epoll.
Forgetting to do so results in the following assertion failure:

  util/fdmon-poll.c:65: fdmon_poll_wait: Assertion `npfd == 0' failed.

Fixes: 1f050a4690f62a1e7dabc4f44141e9f762c3769f ("aio-posix: extract ppoll(2) and epoll(7) fd monitoring")
Signed-off-by: Stefan Hajnoczi <[email protected]>
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1869952
Message-Id: <20200915120339[email protected]>

gitmodules: add qemu.org vbootrom submodule

The vbootrom module is needed for the new NPCM7xx ARM SoCs. The
vbootrom.git repo is now mirrored on qemu.org. QEMU mirrors third-party
code to ensure that users can always build QEMU even if the dependency
goes offline and so QEMU meets its responsibilities to provide full
source code under software licenses.

Suggested-by: Peter Maydell <[email protected]>
Cc: Havard Skinnemoen <[email protected]>
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Tested-by: Philippe Mathieu-Daudé <[email protected]>
Signed-off-by: Stefan Hajnoczi <[email protected]>
Message-Id: <20200915130834[email protected]>

gitmodules: switch to qemu.org meson mirror

QEMU now hosts a mirror of meson.git. QEMU mirrors third-party code to
ensure that users can always build QEMU even if the dependency goes
offline and so QEMU meets its responsibilities to provide full source
code under software licenses.

Suggested-by: Peter Maydell <[email protected]>
Signed-off-by: Stefan Hajnoczi <[email protected]>
Tested-by: Philippe Mathieu-Daudé <[email protected]>
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Cc: Marc-André Lureau <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Message-Id: <20200915130834[email protected]>

gitmodules: switch to qemu.org qboot mirror

QEMU now hosts a mirror of qboot.git. QEMU mirrors third-party code to
ensure that users can always build QEMU even if the dependency goes
offline and so QEMU meets its responsibilities to provide full source
code under software licenses.

Suggested-by: Peter Maydell <[email protected]>
Signed-off-by: Stefan Hajnoczi <[email protected]>
Tested-by: Philippe Mathieu-Daudé <[email protected]>
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Message-Id: <20200915130834[email protected]>

docs/system: clarify deprecation schedule

The sentence explaining the deprecation schedule is ambiguous. Make it
clear that a feature deprecated in the Nth release is guaranteed to
remain available in the N+1th release. Removal can occur in the N+2nd
release or later.

As an example of this in action, see commit
25956af3fe5dd0385ad8017bc768a6afe41e2a74 ("block: Finish deprecation of
'qemu-img convert -n -o'"). The feature was deprecated in QEMU 4.2.0. It
was present in the 5.0.0 release and removed in the 5.1.0 release.

Suggested-by: Daniel P. Berrangé <[email protected]>
Signed-off-by: Stefan Hajnoczi <[email protected]>
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Reviewed-by: Daniel P. Berrangé <[email protected]>
Message-Id: <20200915150734[email protected]>

virtio-crypto: don't modify elem->in/out_sg

A number of iov_discard_front/back() operations are made by
virtio-crypto. The elem->in/out_sg iovec arrays are modified by these
operations, resulting virtqueue_unmap_sg() calls on different addresses
than were originally mapped.

This is problematic because dirty memory may not be logged correctly,
MemoryRegion refcounts may be leaked, and the non-RAM bounce buffer can
be leaked.

Take a copy of the elem->in/out_sg arrays so that the originals are
preserved. The iov_discard_undo() API could be used instead (with better
performance) but requires careful auditing of the code, so do the simple
thing instead.

Signed-off-by: Stefan Hajnoczi <[email protected]>
Reviewed-by: Li Qiang <[email protected]>
Message-Id: <20200917094455[email protected]>

virtio-blk: undo destructive iov_discard_*() operations

Fuzzing discovered that virtqueue_unmap_sg() is being called on modified
req->in/out_sg iovecs. This means dma_memory_map() and
dma_memory_unmap() calls do not have matching memory addresses.

Fuzzing discovered that non-RAM addresses trigger a bug:

  void address_space_unmap(AddressSpace *as, void *buffer, hwaddr len,
                           bool is_write, hwaddr access_len)
  {
      if (buffer != bounce.buffer) {
          ^^^^^^^^^^^^^^^^^^^^^^^

A modified iov->iov_base is no longer recognized as a bounce buffer and
the wrong branch is taken.

There are more potential bugs: dirty memory is not tracked correctly and
MemoryRegion refcounts can be leaked.

Use the new iov_discard_undo() API to restore elem->in/out_sg before
virtqueue_push() is called.

Fixes: 827805a2492c1bbf1c0712ed18ee069b4ebf3dd6 ("virtio-blk: Convert VirtIOBlockReq.out to structrue")
Reported-by: Alexander Bulekov <[email protected]>
Signed-off-by: Stefan Hajnoczi <[email protected]>
Reviewed-by: Li Qiang <[email protected]>
Buglink: https://bugs.launchpad.net/qemu/+bug/1890360
Message-Id: <20200917094455[email protected]>

util/iov: add iov_discard_undo()

The iov_discard_front/back() operations are useful for parsing iovecs
but they modify the array elements. If the original array is needed
after parsing finishes there is currently no way to restore it.

Although g_memdup() can be used before performing destructive
iov_discard_front/back() operations, this is inefficient.

Introduce iov_discard_undo() to restore the array to the state prior to
an iov_discard_front/back() operation.

Signed-off-by: Stefan Hajnoczi <[email protected]>
Reviewed-by: Li Qiang <[email protected]>
Message-Id: <20200917094455[email protected]>

virtio: add vhost-user-fs-ccw device

Wire up the CCW device for vhost-user-fs.

Reviewed-by: Cornelia Huck <[email protected]>
Signed-off-by: Halil Pasic <[email protected]>
Message-id: 20200901150019[email protected]
Signed-off-by: Stefan Hajnoczi <[email protected]>

libvhost-user: handle endianness as mandated by the spec

Since virtio existed even before it got standardized, the virtio
standard defines the following types of virtio devices:

 + legacy device (pre-virtio 1.0)
 + non-legacy or VIRTIO 1.0 device
 + transitional device (which can act both as legacy and non-legacy)

Virtio 1.0 defines the fields of the virtqueues as little endian,
while legacy uses guest's native endian [1]. Currently libvhost-user
does not handle virtio endianness at all, i.e. it works only if the
native endianness matches with whatever is actually needed. That means
things break spectacularly on big-endian targets. Let us handle virtio
endianness for non-legacy as required by the virtio specification [1]
and fence legacy virtio, as there is no safe way to figure out the
needed endianness conversions for all cases. The fencing of legacy
virtio devices is done in `vu_set_features_exec`.

[1] https://docs.oasis-open.org/virtio/virtio/v1.1/cs01/virtio-v1.1-cs01.html#x1-210003

Reviewed-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Marc Hartmayer <[email protected]>
Message-id: 20200901150019[email protected]
Signed-off-by: Stefan Hajnoczi <[email protected]>