sockets: Limit SocketAddressLegacy to external interfaces
SocketAddressLegacy is a simple union, and simple unions are awkward:
they have their variant members wrapped in a "data" object on the
wire, and require additional indirections in C. SocketAddress is the
equivalent flat union. Convert all users of SocketAddressLegacy to
SocketAddress, except for existing external interfaces.
sockets: Rename SocketAddress to SocketAddressLegacy
The next commit will rename SocketAddressFlat to SocketAddress, and
the commit after that will replace most uses of SocketAddressLegacy by
SocketAddress, replacing most of this commit's renames right back.
Note that checkpatch emits a few "line over 80 characters" warnings.
The long lines are all temporary; the SocketAddressLegacy replacement
will shorten them again.
QAPI_CLONE() returns a newly allocated QAPI object. Inconvenient when
we want to clone into an existing object. QAPI_CLONE_MEMBERS() does
exactly that.
sockets: Prepare inet_parse() for flattened SocketAddress
I'm going to flatten SocketAddress: rename SocketAddress to
SocketAddressLegacy, SocketAddressFlat to SocketAddress, eliminate
SocketAddressLegacy except in external interfaces.
inet_parse() returns a newly allocated InetSocketAddress. Lift the
allocation from inet_parse() into its caller socket_parse() to prepare
for flattening SocketAddress.
sockets: Prepare vsock_parse() for flattened SocketAddress
I'm going to flatten SocketAddress: rename SocketAddress to
SocketAddressLegacy, SocketAddressFlat to SocketAddress, eliminate
SocketAddressLegacy except in external interfaces.
vsock_parse() returns a newly allocated VsockSocketAddress. Lift the
allocation from vsock_parse() into its caller socket_parse() to
prepare for flattening SocketAddress.
Eric Blake [Thu, 27 Apr 2017 21:58:21 +0000 (16:58 -0500)]
test-qga: Actually test 0xff sync bytes
Commit 62c39b3 introduced test-qga, and at face value, appears
to be testing the 'guest-sync' behavior that is recommended for
guests in sending 0xff to QGA to force the parser to reset. But
this aspect of the test has never actually done anything: the
qmp_fd() call chain converts its string argument into QObject,
then converts that QObject back to the actual string that is
sent over the wire - and the conversion process silently drops
the 0xff byte from the string sent to QGA, thus never resetting
the QGA parser.
An upcoming patch will get rid of the wasteful round trip
through QObject, at which point the string in test-qga will be
directly sent over the wire.
But fixing qmp_fd() to actually send 0xff over the wire is not
all we have to do - the actual QMP parser loudly complains that
0xff is not valid JSON, and sends an error message _prior_ to
actually parsing the 'guest-sync' or 'guest-sync-delimited'
command. With 'guest-sync', we cannot easily tell if this error
message is a result of our command - which is WHY we invented
the 'guest-sync-delimited' command. So for the testsuite, fix
things to only check 0xff behavior on 'guest-sync-delimited',
and to loop until we've consumed all garbage prior to the
requested delimiter, which is compatible with the documented actions
that a real QGA client is supposed to do.
Ideally, we'd fix the QGA JSON parser to silently ignore 0xff
rather than sending an error message back, at which point we
could enhance this test for 'guest-sync' as well as for
'guest-sync-delimited'. But for the sake of this patch, our
testing of 'guest-sync' is no worse than it was pre-patch,
because we have never been sending 0xff over the wire in the
first place.
Eric Blake [Thu, 27 Apr 2017 21:58:19 +0000 (16:58 -0500)]
QemuOpts: Simplify qemu_opts_to_qdict()
Noticed while investigating Coccinelle cleanups. There is no need
for a temporary variable when we can use the new macro to do the
same thing with less typing.
Eric Blake [Thu, 27 Apr 2017 21:58:18 +0000 (16:58 -0500)]
block: Simplify bdrv_append_temp_snapshot() logic
Noticed while checking Coccinelle results. Naming a label 'out:'
when it is only used on error paths is weird. Also, we had some
dead stores to 'ret'. Meanwhile we know that snapshot_options
is NULL on success and that QDECREF(NULL) is safe. So merge the
two exit paths into one by careful control over bs_snapshot.
Eric Blake [Thu, 27 Apr 2017 21:58:17 +0000 (16:58 -0500)]
qobject: Use simpler QDict/QList scalar insertion macros
We now have macros in place to make it less verbose to add a scalar
to QDict and QList, so use them.
Patch created mechanically via:
spatch --sp-file scripts/coccinelle/qobject.cocci \
--macro-file scripts/cocci-macro-file.h --dir . --in-place
then touched up manually to fix a couple of '?:' back to original
spacing, as well as avoiding a long line in monitor.c.
Eric Blake [Thu, 27 Apr 2017 21:58:16 +0000 (16:58 -0500)]
qobject: Add helper macros for common scalar insertions
Rather than making lots of callers wrap a scalar in a QInt, QString,
or QBool, provide helper macros that do the wrapping automatically.
Update the Coccinelle script to make mass conversions easy, although
the conversion itself will be done as a separate patches to ease
review and backport efforts.
Eric Blake [Thu, 27 Apr 2017 21:58:15 +0000 (16:58 -0500)]
qobject: Drop useless QObject casts
We have macros in place to make it less verbose to add a subtype
of QObject to both QDict and QList. While we have made cleanups
like this in the past (see commit fcfcd8ffc, for example), having
it be automated by Coccinelle makes it easier to maintain.
Patch created mechanically via:
spatch --sp-file scripts/coccinelle/qobject.cocci \
--macro-file scripts/cocci-macro-file.h --dir . --in-place
then I verified that no manual touchups were required.
Eric Blake [Thu, 27 Apr 2017 21:58:14 +0000 (16:58 -0500)]
coccinelle: Add script to remove useless QObject casts
We have macros in place to make it less verbose to add a subtype
of QObject to both QDict and QList. While we have made cleanups
like this in the past (see commit fcfcd8ffc, for example), having
it be automated by Coccinelle makes it easier to maintain.
The script is separate from the cleanups, for ease of review and
backporting. A later patch will then add further possible cleanups.
Eric Blake [Thu, 27 Apr 2017 21:58:12 +0000 (16:58 -0500)]
pci: Use struct instead of QDict to pass back parameters
It's simpler to just use a C struct than it is to bundle things
into a QDict in one function just to pull them back out in the
caller. Plus, doing this gets rid of one more user of dynamic
JSON through qobject_from_jsonf(), as well as a memory leak of
the QDict.
While cleaning the code, fix things to report all errors (the
code was previously silently ignoring a failure of
pcie_aer_inject_error(), at a distance).
Stefan Hajnoczi [Fri, 5 May 2017 16:04:07 +0000 (17:04 +0100)]
Merge remote-tracking branch 'elmarco/tags/chr-tests-pull-request' into staging
# gpg: Signature made Thu 04 May 2017 12:42:10 PM BST
# gpg: using RSA key 0xDAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <[email protected]>"
# gpg: aka "Marc-André Lureau <[email protected]>"
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* elmarco/tags/chr-tests-pull-request: (21 commits)
tests: add /char/console test
tests: add /char/udp test
tests: add /char/socket test
tests: add /char/file test
tests: add /char/pipe test
tests: add alias check in /char/ringbuf
char-udp: flush as much buffer as possible
char-socket: add 'connected' property
char-socket: add 'addr' property
char-socket: update local address after listen
char-socket: introduce update_disconnected_filename()
char: useless NULL check
char: remove chardevs list
char: remove qemu_chardev_add
char: use /chardevs container instead of chardevs list
vl: add todo note about root container cleanup
char: add a /chardevs container
container: don't leak container reference
xen: use a better chardev type check
mux: simplfy muxes_realize_done
...
Stefan Hajnoczi [Fri, 5 May 2017 15:56:23 +0000 (16:56 +0100)]
Merge remote-tracking branch 'cohuck/tags/s390x-3270-20170504' into staging
Basic support for using channel-attached 3270 'green-screen'
devices via tn3270. Actual handling of the data stream is
delegated to x3270; more info at http://wiki.qemu.org/Features/3270
* cohuck/tags/s390x-3270-20170504:
s390x/3270: Mark non-migratable and enable the device
s390x/3270: Detect for continued presence of a 3270 client
s390x/3270: Add the TCP socket events handler for 3270
s390x/3270: 3270 data stream handling
s390x/3270: Add emulated terminal3270 device
s390x/3270: Add abstract emulated ccw-attached 3270 device
s390x/css: Add an algorithm to find a free chpid
chardev: Basic support for TN3270
# gpg: Signature made Thu 04 May 2017 10:35:41 AM BST
# gpg: using RSA key 0xF487EF185872D723
# gpg: Good signature from "Juan Quintela <[email protected]>"
# gpg: aka "Juan Quintela <[email protected]>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* quintela/tags/migration/20170504:
migration: Extra tracing
migration: Move postcopy-ram.h to migration/
monitor: Move hmp_info_snapshots from savevm.c to hmp.c
monitor: Move hmp_delvm from savevm.c to hmp.c
monitor: Move hmp_savevm from savevm.c to hmp.c
monitor: Move hmp_loadvm from monitor.c to hmp.c
monitor: Remove monitor parameter from save_vmstate
migration: to_dst_file at that point is NULL
migration: setup bi-directional I/O channel for exec: protocol
ram: Split dirty bitmap by RAMBlock
Stefan Hajnoczi [Fri, 5 May 2017 15:46:51 +0000 (16:46 +0100)]
Merge remote-tracking branch 'kraxel/tags/pull-audio-20170504-1' into staging
audio: cleanups, bugfixes (memory leaks).
# gpg: Signature made Thu 04 May 2017 08:16:50 AM BST
# gpg: using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <[email protected]>"
# gpg: aka "Gerd Hoffmann <[email protected]>"
# gpg: aka "Gerd Hoffmann (private) <[email protected]>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* kraxel/tags/pull-audio-20170504-1: (30 commits)
audio: Use ARRAY_SIZE from qemu/osdep.h
audio: un-export OPLResetChip
audio: Remove unused typedefs
audio: UpdateHandler is not used anymore
audio: IRQHandler is not used anymore
audio: OPLSetUpdateHandler is not used anywhere
audio: OPLSetIRQHandler is not used anywhere
audio: GUSsample is int16_t
audio: GUSword is uint16_t
audio: GUSword is uint16_t
audio: remove GUSchar
audio: GUSbyte is uint8_t
audio: Remove unused fields
audio: Remove type field
audio: Remove Unused OPL_TYPE_*
audio: Unfold OPLSAMPLE
audio: Remove INT32
audio: remove INT16
audio: Remove INT8
audio: remove UINT32
...
Stefan Hajnoczi [Fri, 5 May 2017 15:21:00 +0000 (16:21 +0100)]
Merge remote-tracking branch 'shorne/tags/pull-or-20170504' into staging
Openrisc Features and Fixes for qemu 2.10
# gpg: Signature made Thu 04 May 2017 01:41:45 AM BST
# gpg: using RSA key 0xC3B31C2D5E6627E4
# gpg: Good signature from "Stafford Horne <[email protected]>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: D9C4 7354 AEF8 6C10 3A25 EFF1 C3B3 1C2D 5E66 27E4
* shorne/tags/pull-or-20170504:
target/openrisc: Support non-busy idle state using PMR SPR
target/openrisc: Remove duplicate features property
target/openrisc: Implement full vmstate serialization
migration: Add VMSTATE_STRUCT_2DARRAY()
target/openrisc: implement shadow registers
migration: Add VMSTATE_UINTTL_2DARRAY()
target/openrisc: add numcores and coreid support
target/openrisc: Fixes for memory debugging
target/openrisc: Implement EPH bit
target/openrisc: Implement EVBAR register
MAINTAINERS: Add myself as openrisc maintainer
Stefan Hajnoczi [Fri, 5 May 2017 14:59:56 +0000 (15:59 +0100)]
Merge remote-tracking branch 'cohuck/tags/s390x-20170502' into staging
More s390x patches, this time boot related:
- LOADPARM machine property, exposed to the guest via SCLP and
diagnose 308
- Use LOADPARM in the s390-ccw bios to select a boot entry
- Fix a crash in the ipl device code when a virtio-scsi-pci device
has been specified
* cohuck/tags/s390x-20170502:
hw/s390x/ipl: Fix crash with virtio-scsi-pci device
pc-bios/s390-ccw.img: update image
pc-bios/s390-ccw: add boot entry selection to El Torito routine
pc-bios/s390-ccw: add boot entry selection for ECKD DASD
pc-bios/s390-ccw: provide entry selection on LOADPARM for SCSI disk
pc-bios/s390-ccw: provide a function to interpret LOADPARM value
pc-bios/s390-ccw: get LOADPARM stored in SCP Read Info
pc-bios/s390-ccw: Make ebcdic/ascii conversion public
util/qemu-config: Add loadparm to qemu machine_opts
hw/s390x/sclp: update LOADPARM in SCP Info
hw/s390x/ipl: enable LOADPARM in IPIB for a boot device
hw/s390x: provide loadparm property for the machine
Stefan Hajnoczi [Thu, 4 May 2017 12:44:32 +0000 (13:44 +0100)]
Merge remote-tracking branch 'kwolf/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Fri 28 Apr 2017 09:20:17 PM BST
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <[email protected]>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* kwolf/tags/for-upstream: (34 commits)
progress: Show current progress on SIGINFO
iotests: fix exclusion option
iotests: clarify help text
qemu-img: use blk_co_pwrite_zeroes for zero sectors when compressed
qemu-img: improve convert_iteration_sectors()
block: assert no image modification under BDRV_O_INACTIVE
block: fix obvious coding style mistakes in block_int.h
qcow2: Allow discard of final unaligned cluster
block: Add .bdrv_truncate() error messages
block: Add errp to BD.bdrv_truncate()
block: Add errp to b{lk,drv}_truncate()
block/vhdx: Make vhdx_create() always set errp
qemu-img: Document backing options
qemu-img/convert: Move bs_n > 1 && -B check down
qemu-img/convert: Use @opts for one thing only
block: fix alignment calculations in bdrv_co_do_zero_pwritev
block: Do not unref bs->file on error in BD's open
iotests: 109: Filter out "len" of failed jobs
iotests: Fix typo in 026
Issue a deprecation warning if the user specifies the "-hdachs" option.
...
This is mainly useful to know the actual bound port when using port 0.
For example, when starting qemu with socket on port 0, before:
QEMU waiting for connection on: disconnected:tcp:localhost:0,server
After:
QEMU waiting for connection on: disconnected:tcp:localhost:32454,server
qemu_chardev_new() now uses object_new_with_props() with /chardevs
parent container. It will fail to insert the object if the same "id"
already exists. "chardevs" list usage has been removed in previous
commits.
mux_chr_event() already send events to all backends, rename it,
export it, and use it from muxes_realize_done. This should help abstract
away mux implementation.
Jing Liu [Thu, 12 Jan 2017 09:38:25 +0000 (10:38 +0100)]
s390x/3270: Mark non-migratable and enable the device
Mark 3270 as non-migratable for the experimental stage. Enable
the 3270 device so that we can use x3270 client to operate the guest.
Run qemu with the arguments:
-chardev socket,id=char3270_0,host=0.0.0.0,port=23,nowait,server,tn3270 \
-device x-terminal3270,chardev=char3270_0,devno=fe.0.000a,id=terminal3270_0 \
There are some restrictions for the first stage: We don't support SSL
connections, multiple client connections and client resizing. Only
tested with the x3270 client.
Jing Liu [Fri, 14 Oct 2016 09:16:23 +0000 (11:16 +0200)]
s390x/3270: Detect for continued presence of a 3270 client
To ensure that we do not keep any 3270 sockets where the client is not
connected anymore, we send a packet with the timing mark option after
ten minutes of client inactivity. If the client does not answer it,
then the socket will be closed automatically.
This helps to ensure that there is no half-open situation on the 3270
socket.
Jing Liu [Fri, 1 Apr 2016 06:32:58 +0000 (08:32 +0200)]
s390x/3270: 3270 data stream handling
This introduces the input and output handlers for 3270 device, setting
up the data tunnel among guest kernel, qemu and the 3270 client.
After the client connected and TN3270 handshake done, signal the not-ready
to ready status by an unsolicited device-end interrupt, and then the 3270
data stream could be handled correctly between the channel and socket.
Multiple commands generated by "Reset" key on x3270 are not supported now,
just simply terminate the connection.
Yang Chen [Fri, 19 Feb 2016 09:45:26 +0000 (10:45 +0100)]
s390x/3270: Add emulated terminal3270 device
This is a basic implementation of the emulated ccw-attached 3270
called x-terminal3270, which provides visibility of the device in
the qemu monitor and guest. The x prefix indicates that this is
just an experimental implementation for the current stage. This
device will not be compiled until the basic functions are available.
Jing Liu [Mon, 19 Sep 2016 07:10:43 +0000 (09:10 +0200)]
s390x/css: Add an algorithm to find a free chpid
This introduces a function named css_find_free_chpid() to find a
free channel path. Because virtio-ccw device used zero as its
channel path number, it would be sensible to skip the reserved one
and search upwards.
Jing Liu [Fri, 23 Sep 2016 06:06:11 +0000 (08:06 +0200)]
chardev: Basic support for TN3270
This introduces basic support for TN3270, which needs to negotiate
three Telnet options during handshake:
- End of Record
- Binary Transmission
- Terminal-Type
As a basic implementation, this simply ignores NOP and Interrupt
Process(IP) commands. More work should be done for them later.
For more details, please refer to RFC 854 and 1576.
Juan Quintela [Wed, 5 Apr 2017 15:32:56 +0000 (17:32 +0200)]
migration: to_dst_file at that point is NULL
We have just arrived as:
migration.c: qemu_migrate()
....
s = migrate_init() <- puts it to NULL
....
{tcp,unix}_start_outgoing_migration ->
socket_outgoing_migration
migration_channel_connect()
sets to_dst_file
if tls is enabled, we do another round through
migrate_channel_tls_connect(), but we only set it up if there is no
error. So we don't need the assignation. I am removing it to remove
in the follwing patches the knowledge about MigrationState in that two
files.
migration: setup bi-directional I/O channel for exec: protocol
Historically the migration data channel has only needed to be
unidirectional. Thus the 'exec:' protocol was requesting an
I/O channel with O_RDONLY on incoming side, and O_WRONLY on
the outgoing side.
This is fine for classic migration, but if you then try to run
TLS over it, this fails because the TLS handshake requires a
bi-directional channel.
target/openrisc: Support non-busy idle state using PMR SPR
The OpenRISC architecture has the Power Management Register (PMR)
special purpose register to manage cpu power states. The interesting
modes are:
* Doze Mode (DME) - Stop cpu except timer & pic - wake on interrupt
* Sleep Mode (SME) - Stop cpu and all units - wake on interrupt
* Suspend Model (SUME) - Stop cpu and all units - wake on reset
The linux kernel will set DME when idle.
This patch implements the PMR SPR and halts the qemu cpu when there is a
change to DME or SME. This means that openrisc qemu in no longer peggs
a host cpu at 100%.
In order for this to work we need to kick the CPU when timers are
expired. Update the cpu timer to kick the cpu upon each timer event.
target/openrisc: Remove duplicate features property
The features property has stored the exact same thing as the cpucfgr
spr. Remove the feature enum and property as it is not needed.
In order to preserve the behavior or keeping features accross reset this
patch moves cpucfgr into the non reset region of the state struct. Since
the cpucfgr is read only this means we only need to sset cpucfgr once
during class init.
target/openrisc: Implement full vmstate serialization
Previously serialization did not persist the tlb, timer, pic and other
key state items. This meant snapshotting and restoring a running os
would crash. After adding these I am able to take snapshots of a
running linux os and restore at a later time.
I am currently not trying to maintain capatibility with older versions
as I do not believe this really worked before or anyone used it.
projects / qemu.git / log