Alberto Garcia [Mon, 19 Jun 2017 13:40:02 +0000 (16:40 +0300)]
qcow2: Remove unused Error variable in do_perform_cow()
We are using the return value of qcow2_encrypt_sectors() to detect
problems but we are throwing away the returned Error since we have no
way to report it to the user. Therefore we can simply get rid of the
local Error variable and pass NULL instead.
Alternatively we could try to figure out a way to pass the original
error instead of simply returning -EIO, but that would be more
invasive, so let's keep the current approach.
Stephen Bates [Tue, 13 Jun 2017 10:08:35 +0000 (04:08 -0600)]
nvme: Add support for Read Data and Write Data in CMBs.
Add the ability for the NVMe model to support both the RDS and WDS
modes in the Controller Memory Buffer.
Although not currently supported in the upstreamed Linux kernel a fork
with support exists [1] and user-space test programs that build on
this also exist [2].
Useful for testing CMB functionality in preperation for real CMB
enabled NVMe devices (coming soon).
Stefan Hajnoczi [Thu, 15 Jun 2017 16:38:10 +0000 (17:38 +0100)]
migration: hold AioContext lock for loadvm qemu_fclose()
migration_incoming_state_destroy() uses qemu_fclose() on the vmstate
file. Make sure to call it inside an AioContext acquire/release region.
This fixes an 'qemu: qemu_mutex_unlock: Operation not permitted' abort
in loadvm.
This patch closes the vmstate file before ending the drained region.
Previously we closed the vmstate file after ending the drained region.
The order does not matter.
Alberto Garcia [Tue, 13 Jun 2017 21:16:12 +0000 (00:16 +0300)]
throttle: Update throttle-groups.c documentation
There used to be throttle_timers_{detach,attach}_aio_context() calls
in bdrv_set_aio_context(), but since 7ca7f0f6db1fedd28d490795d778cf239
they are now in blk_set_aio_context().
Kevin Wolf [Thu, 22 Sep 2016 15:24:38 +0000 (17:24 +0200)]
doc: Document driver-specific -blockdev options
This documents the driver-specific options for the raw, qcow2 and file
block drivers for the man page. For everything else, we refer to the
QAPI documentation.
Kevin Wolf [Thu, 22 Sep 2016 14:53:24 +0000 (16:53 +0200)]
doc: Document generic -blockdev options
This adds documentation for the -blockdev options that apply to all
nodes independent of the block driver used.
All options that are shared by -blockdev and -drive are now explained in
the section for -blockdev. The documentation of -drive mentions that all
-blockdev options are accepted as well.
Stefan Hajnoczi [Mon, 22 May 2017 13:57:04 +0000 (14:57 +0100)]
migration: use bdrv_drain_all_begin/end() instead bdrv_drain_all()
blk/bdrv_drain_all() only takes effect for a single instant and then
resumes block jobs, guest devices, and other external clients like the
NBD server. This can be handy when performing a synchronous drain
before terminating the program, for example.
Monitor commands usually need to quiesce I/O across an entire code
region so blk/bdrv_drain_all() is not suitable. They must use
bdrv_drain_all_begin/end() to mark the region. This prevents new I/O
requests from slipping in or worse - block jobs completing and modifying
the graph.
I audited other blk/bdrv_drain_all() callers but did not find anything
that needs a similar fix. This patch fixes the savevm/loadvm commands.
Although I haven't encountered a read world issue this makes the code
safer.
Stefan Hajnoczi [Mon, 22 May 2017 13:57:03 +0000 (14:57 +0100)]
migration: avoid recursive AioContext locking in save_vmstate()
AioContext was designed to allow nested acquire/release calls. It uses
a recursive mutex so callers don't need to worry about nesting...or so
we thought.
BDRV_POLL_WHILE() is used to wait for block I/O requests. It releases
the AioContext temporarily around aio_poll(). This gives IOThreads a
chance to acquire the AioContext to process I/O completions.
It turns out that recursive locking and BDRV_POLL_WHILE() don't mix.
BDRV_POLL_WHILE() only releases the AioContext once, so the IOThread
will not be able to acquire the AioContext if it was acquired
multiple times.
Instead of trying to release AioContext n times in BDRV_POLL_WHILE(),
this patch simply avoids nested locking in save_vmstate(). It's the
simplest fix and we should step back to consider the big picture with
all the recent changes to block layer threading.
This patch is the final fix to solve 'savevm' hanging with -object
iothread.
Stefan Hajnoczi [Mon, 22 May 2017 13:57:02 +0000 (14:57 +0100)]
block: use BDRV_POLL_WHILE() in bdrv_rw_vmstate()
Calling aio_poll() directly may have been fine previously, but this is
the future, man! The difference between an aio_poll() loop and
BDRV_POLL_WHILE() is that BDRV_POLL_WHILE() releases the AioContext
around aio_poll().
This allows the IOThread to run fd handlers or BHs to complete the
request. Failure to release the AioContext causes deadlocks.
Using BDRV_POLL_WHILE() partially fixes a 'savevm' hang with -object
iothread.
Stefan Hajnoczi [Mon, 22 May 2017 13:57:01 +0000 (14:57 +0100)]
block: count bdrv_co_rw_vmstate() requests
Call bdrv_inc/dec_in_flight() for vmstate reads/writes. This seems
unnecessary at first glance because vmstate reads/writes are done
synchronously while the guest is stopped. But we need the bdrv_wakeup()
in bdrv_dec_in_flight() so the main loop sees request completion.
Besides, it's cleaner to count vmstate reads/writes like ordinary
read/write requests.
The bdrv_wakeup() partially fixes a 'savevm' hang with -object iothread.
Kevin Wolf [Fri, 9 Jun 2017 11:37:01 +0000 (13:37 +0200)]
qemu-iotests: Test exiting qemu with running job
When qemu is exited, all running jobs should be cancelled successfully.
This adds a test for this for all types of block jobs that currently
exist in qemu.
Kevin Wolf [Fri, 9 Jun 2017 11:32:48 +0000 (13:32 +0200)]
qemu-iotests: Allow starting new qemu after cleanup
After _cleanup_qemu(), test cases should be able to start the next qemu
process and call _cleanup_qemu() for that one as well. For this to work
cleanly, we need to improve the cleanup so that the second invocation
doesn't try to kill the qemu instances from the first invocation a
second time (which would result in error messages).
Kevin Wolf [Fri, 9 Jun 2017 11:29:36 +0000 (13:29 +0200)]
commit: Fix completion with extra reference
commit_complete() can't assume that after its block_job_completed() the
job is actually immediately freed; someone else may still be holding
references. In this case, the op blockers on the intermediate nodes make
the graph reconfiguration in the completion code fail.
Call block_job_remove_all_bdrv() manually so that we know for sure that
any blockers on intermediate nodes are given up.
* remotes/rth/tags/pull-s390-20170623:
target/s390x: Implement idte instruction
target/s390x: Improve heuristic for ipte
target/s390x: Indicate and check for local tlb clearing
target/s390x: Clean up TB flag bits
target/s390x: Finish implementing ETF2-ENH
target/s390x: Mark STFLE_49 facility as available
target/s390x: Implement processor-assist insn
target/s390x: Implement execution-hint insns
target/s390x: Mark STFLE_53 facility as available
target/s390x: Implement load-and-zero-rightmost-byte insns
target/s390x: Implement load-on-condition-2 insns
target/s390x: Mark FPSEH facility as available
target/s390x: implement mvcos instruction
target/s390x: change PSW_SHIFT_KEY
target/s390x: Map existing FAC_* names to S390_FEAT_* names
Let's keep it very simple for now and flush the complete tlb,
we currently can't find the right entries in our tlb, we would have
to store the used tables for each element.
As we now fully implement the DAT-enhancement facility, we can allow to
enable it for the qemu CPU model.
Most of the PSW bits that were being copied into TB->flags
are not relevant to translation. Removing those that are
unnecessary reduces the amount of translation required.
This adds support for the MOVE WITH OPTIONAL SPECIFICATIONS (MVCOS)
instruction. Allow to enable it for the qemu cpu model using
qemu-system-s390x ... -cpu qemu,mvcos=on ...
This allows to boot linux kernel that uses it for uacccess.
We are missing (as for most other part) low address protection checks,
PSW key / storage key checks and support for AR-mode.
We fake an ADDRESSING exception when called from problem state (which
seems to rely on PSW key checks to be in place) and if AR-mode is used.
user mode will always see a PRIVILEDGED exception.
This patch is based on an original patch by Miroslav Benes (thanks!).
# gpg: Signature made Thu 22 Jun 2017 09:01:01 BST
# gpg: using RSA key 0xDF32E7C0F0FFF9A2
# gpg: Good signature from "Eduardo Otubo (Senior Software Engineer) <[email protected]>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: D67E 1B50 9374 86B4 0723 DBAB DF32 E7C0 F0FF F9A2
* remotes/otubo/tags/pull-seccomp-20170622:
MAINTAINERS: seccomp: change email contact for Eduardo Otubo
* remotes/kraxel/tags/queue/misc-pull-request:
applesmc: fix port i/o access width
applesmc: implement error status port
applesmc: cosmetic whitespace and indentation cleanup
John Arbuckle [Wed, 14 Jun 2017 03:17:38 +0000 (23:17 -0400)]
ui/cocoa.m: add Speed menu
Programs running inside of QEMU can sometimes use more CPU time than is really
needed. To solve this problem, we just need to throttle the virtual CPU. This
feature will stop laptops from burning up.
This patch adds a menu called Speed that has menu items from 100% to 1% that
represent the speed options. 100% is full speed and 1% is slowest.
Signed-off-by: John Arbuckle <[email protected]>
Message-id: D6FAAABF-064D-49C0-B572-C73679F34052@gmail.com
[PMM: Moved "mark 100% menu item as checked initially" code to
after menu item is allocated, not before it] Reviewed-by: Peter Maydell <[email protected]> Signed-off-by: Peter Maydell <[email protected]>
Gabriel L. Somlo [Fri, 16 Jun 2017 18:55:15 +0000 (14:55 -0400)]
applesmc: implement error status port
As of release 10.12.4, OS X (Sierra) refuses to boot unless the
AppleSMC supports an additional I/O port, expected to provide an
error status code.
Update the [cmd|data]_write() and data_read() methods to implement
the required state machine, and add I/O region & methods to handle
access to the error port.
Originally proposed by Eric Shelton <[email protected]> based in
part on FakeSMC (git://git.assembla.com/fakesmc.git).
Gerd Hoffmann [Tue, 6 Jun 2017 11:21:05 +0000 (13:21 +0200)]
ps2: reset queue in ps2_reset_keyboard
When the guest resets the keyboard also clear the queue. It is highly
unlikely that the guest is still interested in the events stuck in the
queue, and it avoids confusing the guest in case the queue is full and
the ACK can't be queued up.
Alexander Graf [Thu, 22 Jun 2017 07:41:35 +0000 (09:41 +0200)]
hid: Reset kbd modifiers on reset
When resetting the keyboard, we need to reset not just the pending keystrokes,
but also any pending modifiers. Otherwise there's a race when we're getting
reset while running an escape sequence (modifier 0x100).
Alexander Graf [Thu, 22 Jun 2017 07:41:58 +0000 (09:41 +0200)]
input: Decrement queue count on kbd delay
Delays in the input layer are special cased input events. Every input
event is accounted for in a global intput queue count. The special cased
delays however did not get removed from the queue, leading to queue overruns
and thus silent key drops after typing quite a few characters.
Gerd Hoffmann [Tue, 6 Jun 2017 13:47:36 +0000 (15:47 +0200)]
keymaps: add tracing
Drop commented debug logging, add trace points instead.
Also cleanup parser code a bit, the key name is copied into a new
variable instead of patching the input line, that way we can log
the unmodified line.
* remotes/vivier/tags/m68k-for-2.10-pull-request:
target-m68k: add FPCR and FPSR
target-m68k: define 96bit FP registers for gdb on 680x0
target-m68k: use floatx80 internally
target-m68k: initialize FPU registers
target-m68k: move fmove CR to a function
Peter Maydell [Thu, 22 Jun 2017 13:33:41 +0000 (14:33 +0100)]
Merge remote-tracking branch 'remotes/stsquad/tags/pull-ci-updates-210617-2' into staging
This is mostly Philippe's updates
We add the following cross-compile targets:
- mipsel-softmmu,mipsel-linux-user,mips64el-linux-user
- armeb-linux-user
While I was rolling I discovered we could also back out a bunch of the
emdebian hacks as the newly released stretch handles cross compilers
as first class citizens. Unfortunately this also meant I had to drop
the powerpc support as that is no longer in Debian stable.
# gpg: Signature made Wed 21 Jun 2017 15:09:50 BST
# gpg: using RSA key 0xFBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <[email protected]>"
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-ci-updates-210617-2: (21 commits)
MAINTAINERS: self-appoint me as reviewer in build/test automation
MAINTAINERS: add Shippable automation platform URL
shippable: add mipsel target
shippable: add armeb-linux-user target
shippable: be verbose while building docker images
shippable: do not initialize submodules automatically
shippable: build using all available cpus
shippable: use C locale to simplify console output
docker: add mipsel build target
docker: add extra libs to s390x target to extend codebase coverage
docker: add extra libs to arm64 target to extend codebase coverage
docker: add extra libs to armhf target to extend codebase coverage
docker: use eatmydata in debian arm64 image
docker: use eatmydata in debian armhf image
docker: use eatmydata, install common build packages in base image
docker: use better regex to generate deb-src entries
docker: install ca-certificates package in base image
docker: rebuild image if 'extra files' checksum does not match
docker: add --include-files argument to 'build' command
docker: let _copy_with_mkdir() sub_path argument be optional
...
Peter Maydell [Thu, 22 Jun 2017 10:34:38 +0000 (11:34 +0100)]
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2017-06-09-v2' into staging
QAPI patches for 2017-06-09
# gpg: Signature made Tue 20 Jun 2017 13:31:39 BST
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <[email protected]>"
# gpg: aka "Markus Armbruster <[email protected]>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2017-06-09-v2: (41 commits)
tests/qdict: check more get_try_int() cases
console: use get_uint() for "head" property
i386/cpu: use get_uint() for "min-level"/"min-xlevel" properties
numa: use get_uint() for "size" property
pnv-core: use get_uint() for "core-pir" property
pvpanic: use get_uint() for "ioport" property
auxbus: use get_uint() for "addr" property
arm: use get_uint() for "mp-affinity" property
xen: use get_uint() for "max-ram-below-4g" property
pc: use get_uint() for "hpet-intcap" property
pc: use get_uint() for "apic-id" property
pc: use get_uint() for "iobase" property
acpi: use get_uint() for "pci-hole*" properties
acpi: use get_uint() for various acpi properties
acpi: use get_uint() for "acpi-pcihp-io*" properties
platform-bus: use get_uint() for "addr" property
bcm2835_fb: use {get, set}_uint() for "vcram-size" and "vcram-base"
aspeed: use {set, get}_uint() for "ram-size" property
pcihp: use get_uint() for "bsel" property
pc-dimm: make "size" property uint64
...
* remotes/rth/tags/pull-tcg-20170619:
target/arm: Exit after clearing aarch64 interrupt mask
target/s390x: Exit after changing PSW mask
target/alpha: Use tcg_gen_lookup_and_goto_ptr
tcg: Increase hit rate of lookup_tb_ptr
tcg/arm: Use ldr (literal) for goto_tb
tcg/arm: Try pc-relative addresses for movi
tcg/arm: Remove limit on code buffer size
tcg/arm: Use indirect branch for goto_tb
tcg/aarch64: Use ADR in tcg_out_movi
translate-all: consolidate tb init in tb_gen_code
tcg: allocate TB structs before the corresponding translated code
util: add cacheinfo
shippable: do not initialize submodules automatically
instead do it in the 'ci' target when needed.
for mips64el-softmmu target:
use dtc submodule if distrib packages are too old.
example with outdated libfdt on mips64el-softmmu target (required is >= 1.4.2):
# dpkg-query --showformat='${Version}\n' --show libfdt-dev
1.4.0+dfsg-1
shippable output:
----------------
LINK mips64el-softmmu/qemu-system-mips64el
../hw/core/loader-fit.o: In function `load_fit':
/root/src/github.com/philmd/qemu/hw/core/loader-fit.c:278: undefined reference to `fdt_first_subnode'
/root/src/github.com/philmd/qemu/hw/core/loader-fit.c:286: undefined reference to `fdt_next_subnode'
/root/src/github.com/philmd/qemu/hw/core/loader-fit.c:277: undefined reference to `fdt_first_subnode'
collect2: error: ld returned 1 exit status
Makefile:201: recipe for target 'qemu-system-mips64el' failed
make[1]: *** [qemu-system-mips64el] Error 1
Makefile:327: recipe for target 'subdir-mips64el-softmmu' failed
make: *** [subdir-mips64el-softmmu] Error 2
shippable: use C locale to simplify console output
remove this noise:
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = "en_US.UTF-8",
LC_CTYPE = "en_US.UTF-8",
LANG = "en_US.UTF-8"
are supported and installed on your system.
Alex Bennée [Wed, 21 Jun 2017 13:21:33 +0000 (14:21 +0100)]
docker: update qemu:debian base following stretch release
Debian has now released Stretch as its new stable. As we track
debian:stable-slim this has a few consequences. For one thing we can
now drop the emdebian hacks as cross compilers are part of the
official repositories now. However we do loose the ability to build
against powerpc (not ppc64) since that is no longer a release
architecture.
Samuel Brian [Tue, 13 Jun 2017 23:40:39 +0000 (09:40 +1000)]
usb-host: support devices with sparse/non-sequential USB interfaces
Some USB devices have sparse interface numbering which is not able to be
passthroughed.
For example, the Sierra Wireless MC7455/MC7430:
# lsusb -D /dev/bus/usb/003/003 | egrep '1199|9071|bNumInterfaces|bInterfaceNumber'
Device: ID 1199:9071 Sierra Wireless, Inc.
idVendor 0x1199 Sierra Wireless, Inc.
idProduct 0x9071
bNumInterfaces 5
bInterfaceNumber 0
bInterfaceNumber 2
bInterfaceNumber 3
bInterfaceNumber 8
bInterfaceNumber 10
In this case, the interface numbers are 0, 2, 3, 8, 10 and not the
0, 1, 2, 3, 4 that QEMU tries to claim.
This change allows sparse USB interface numbering.
Instead of only claiming the interfaces in the range reported by the USB
device through bNumInterfaces, QEMU attempts to claim all possible
interfaces.
v2 to fix broken v1 patch formatting.
v3 to fix indentation.
$ make subdir-arm-softmmu
make[1]: *** No rule to make target 'tci.o', needed by 'qemu-system-arm'. Stop.
Makefile:328: recipe for target 'subdir-arm-softmmu' failed
make: *** [subdir-arm-softmmu] Error 2
Peter Maydell [Tue, 20 Jun 2017 15:01:15 +0000 (16:01 +0100)]
Merge remote-tracking branch 'remotes/famz/tags/docker-and-block-pull-request' into staging
# gpg: Signature made Fri 16 Jun 2017 01:18:46 BST
# gpg: using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <[email protected]>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/docker-and-block-pull-request: (23 commits)
block: make accounting thread-safe
block: split BlockAcctStats creation and setup
block: introduce block_account_one_io
block: protect modification of dirty bitmaps with a mutex
migration/block: reset dirty bitmap before reading
block: introduce dirty_bitmap_mutex
block: protect tracked_requests and flush_queue with reqs_lock
block: access write_gen with atomics
block: use Stat64 for wr_highest_offset
util: add stats64 module
throttle-groups: protect throttled requests with a CoMutex
throttle-groups: do not use qemu_co_enter_next
throttle-groups: only start one coroutine from drained_begin
block: access io_plugged with atomic ops
block: access wakeup with atomic ops
block: access serialising_in_flight with atomic ops
block: access io_limits_disabled with atomic ops
block: access quiesce_counter with atomic ops
block: access copy_on_read with atomic ops
docker: Add flex and bison to centos6 image
...
* remotes/bonzini/tags/for-upstream: (41 commits)
vhost-user-scsi: Introduce a vhost-user-scsi sample application
vhost-user-scsi: Introduce vhost-user-scsi host device
qemu-doc: include version number
docs: create interop/ subdirectory
include/exec/poison: Mark some CONFIG defines as poisoned, too
include/exec/poison: Add missing TARGET defines
nbd/server: refactor nbd_trip
nbd/server: rename rc to ret
nbd/server: get rid of fail: return rc
nbd/server: nbd_negotiate: fix error path
nbd/server: remove NBDClientNewData
nbd/server: refactor nbd_co_receive_request
nbd/server: get rid of EAGAIN dead code
nbd/server: refactor nbd_co_send_reply
nbd/server: get rid of ssize_t
nbd/server: get rid of nbd_negotiate_read and friends
nbd: make nbd_drop public
nbd: rename read_sync and friends
accel: move kvm related accelerator files into accel/
tcg: move tcg backend files into accel/tcg/
...
xen: use get_uint() for "max-ram-below-4g" property
TYPE_PC_MACHINE's property PC_MACHINE_MAX_RAM_BELOW_4G's getter and
setter pc_machine_get_max_ram_below_4g() and
pc_machine_set_max_ram_below_4g() use visit_type_size()
projects / qemu.git / log