int64_t ti;
int secs;
- ti = qemu_get_clock_ms(rt_clock);
+ ti = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
if (d->timestamps_start == -1)
d->timestamps_start = ti;
ti -= d->timestamps_start;
mux_chr_send_event(d, d->focus, CHR_EVENT_MUX_IN);
}
+static bool muxes_realized;
+
+/**
+ * Called after processing of default and command-line-specified
+ * chardevs to deliver CHR_EVENT_OPENED events to any FEs attached
+ * to a mux chardev. This is done here to ensure that
+ * output/prompts/banners are only displayed for the FE that has
+ * focus when initial command-line processing/machine init is
+ * completed.
+ *
+ * After this point, any new FE attached to any new or existing
+ * mux will receive CHR_EVENT_OPENED notifications for the BE
+ * immediately.
+ */
+static void muxes_realize_done(Notifier *notifier, void *unused)
+{
+ CharDriverState *chr;
+
+ QTAILQ_FOREACH(chr, &chardevs, next) {
+ if (chr->is_mux) {
+ MuxDriver *d = chr->opaque;
+ int i;
+
+ /* send OPENED to all already-attached FEs */
+ for (i = 0; i < d->mux_cnt; i++) {
+ mux_chr_send_event(d, i, CHR_EVENT_OPENED);
+ }
+ /* mark mux as OPENED so any new FEs will immediately receive
+ * OPENED event
+ */
+ qemu_chr_be_generic_open(chr);
+ }
+ }
+ muxes_realized = true;
+}
+
+static Notifier muxes_realize_notify = {
+ .notify = muxes_realize_done,
+};
+
static CharDriverState *qemu_chr_open_mux(CharDriverState *drv)
{
CharDriverState *chr;
chr->chr_accept_input = mux_chr_accept_input;
/* Frontend guest-open / -close notification is not support with muxes */
chr->chr_set_fe_open = NULL;
+ /* only default to opened state if we've realized the initial
+ * set of muxes
+ */
+ chr->explicit_be_open = muxes_realized ? 0 : 1;
+ chr->is_mux = 1;
return chr;
}
static int io_channel_send(GIOChannel *fd, const void *buf, size_t len)
{
- GIOStatus status;
- size_t offset;
+ size_t offset = 0;
+ GIOStatus status = G_IO_STATUS_NORMAL;
- offset = 0;
- while (offset < len) {
- gsize bytes_written;
+ while (offset < len && status == G_IO_STATUS_NORMAL) {
+ gsize bytes_written = 0;
status = g_io_channel_write_chars(fd, buf + offset, len - offset,
&bytes_written, NULL);
- if (status != G_IO_STATUS_NORMAL) {
- if (status == G_IO_STATUS_AGAIN) {
- /* If we've written any data, return a partial write. */
- if (offset) {
- break;
- }
- errno = EAGAIN;
- } else {
- errno = EINVAL;
- }
-
- return -1;
- } else if (status == G_IO_STATUS_EOF) {
- break;
- }
-
offset += bytes_written;
}
- return offset;
+ if (offset > 0) {
+ return offset;
+ }
+ switch (status) {
+ case G_IO_STATUS_NORMAL:
+ g_assert(len == 0);
+ return 0;
+ case G_IO_STATUS_AGAIN:
+ errno = EAGAIN;
+ return -1;
+ default:
+ break;
+ }
+ errno = EINVAL;
+ return -1;
}
#ifndef _WIN32
tty.c_cc[VMIN] = 1;
tty.c_cc[VTIME] = 0;
}
- /* if graphical mode, we allow Ctrl-C handling */
if (!stdio_allow_signal)
tty.c_lflag &= ~ISIG;
chr = qemu_chr_open_fd(0, 1);
chr->chr_close = qemu_chr_close_stdio;
chr->chr_set_echo = qemu_chr_set_echo_stdio;
- stdio_allow_signal = display_type != DT_NOGRAPHIC;
if (opts->has_signal) {
stdio_allow_signal = opts->signal;
}
s->timer_tag = 0;
}
if (!s->connected) {
- qemu_chr_be_generic_open(chr);
s->connected = 1;
+ qemu_chr_be_generic_open(chr);
s->fd_tag = io_add_watch_poll(s->fd, pty_chr_read_poll, pty_chr_read, chr);
}
}
chr->opaque = NULL;
}
-static CharDriverState *qemu_chr_open_memory(ChardevMemory *opts,
- Error **errp)
+static CharDriverState *qemu_chr_open_ringbuf(ChardevRingbuf *opts,
+ Error **errp)
{
CharDriverState *chr;
RingBufCharDriver *d;
/* The size must be power of 2 */
if (d->size & (d->size - 1)) {
- error_setg(errp, "size of memory chardev must be power of two");
+ error_setg(errp, "size of ringbuf chardev must be power of two");
goto fail;
}
if (strstart(filename, "mon:", &p)) {
filename = p;
qemu_opt_set(opts, "mux", "on");
+ if (strcmp(filename, "stdio") == 0) {
+ /* Monitor is muxed to stdio: do not exit on Ctrl+C by default
+ * but pass it to the guest. Handle this only for compat syntax,
+ * for -chardev syntax we have special option for this.
+ * This is what -nographic did, redirecting+muxing serial+monitor
+ * to stdio causing Ctrl+C to be passed to guest. */
+ qemu_opt_set(opts, "signal", "off");
+ }
}
if (strcmp(filename, "null") == 0 ||
{
backend->stdio = g_new0(ChardevStdio, 1);
backend->stdio->has_signal = true;
- backend->stdio->signal =
- qemu_opt_get_bool(opts, "signal", display_type != DT_NOGRAPHIC);
+ backend->stdio->signal = qemu_opt_get_bool(opts, "signal", true);
}
static void qemu_chr_parse_serial(QemuOpts *opts, ChardevBackend *backend,
backend->pipe->device = g_strdup(device);
}
-static void qemu_chr_parse_memory(QemuOpts *opts, ChardevBackend *backend,
- Error **errp)
+static void qemu_chr_parse_ringbuf(QemuOpts *opts, ChardevBackend *backend,
+ Error **errp)
{
int val;
- backend->memory = g_new0(ChardevMemory, 1);
+ backend->ringbuf = g_new0(ChardevRingbuf, 1);
- val = qemu_opt_get_number(opts, "size", 0);
+ val = qemu_opt_get_size(opts, "size", 0);
if (val != 0) {
- backend->memory->has_size = true;
- backend->memory->size = val;
+ backend->ringbuf->has_size = true;
+ backend->ringbuf->size = val;
}
}
chr = qemu_chr_new_from_opts(opts, init, &err);
if (error_is_set(&err)) {
- fprintf(stderr, "%s\n", error_get_pretty(err));
+ error_report("%s", error_get_pretty(err));
error_free(err);
}
if (chr && qemu_opt_get_bool(opts, "mux", 0)) {
case CHARDEV_BACKEND_KIND_VC:
chr = vc_init(backend->vc);
break;
+ case CHARDEV_BACKEND_KIND_RINGBUF:
case CHARDEV_BACKEND_KIND_MEMORY:
- chr = qemu_chr_open_memory(backend->memory, errp);
+ chr = qemu_chr_open_ringbuf(backend->ringbuf, errp);
break;
default:
error_setg(errp, "unknown chardev backend (%d)", backend->kind);
register_char_driver_qapi("null", CHARDEV_BACKEND_KIND_NULL, NULL);
register_char_driver("socket", qemu_chr_open_socket);
register_char_driver("udp", qemu_chr_open_udp);
- register_char_driver_qapi("memory", CHARDEV_BACKEND_KIND_MEMORY,
- qemu_chr_parse_memory);
+ register_char_driver_qapi("ringbuf", CHARDEV_BACKEND_KIND_RINGBUF,
+ qemu_chr_parse_ringbuf);
register_char_driver_qapi("file", CHARDEV_BACKEND_KIND_FILE,
qemu_chr_parse_file_out);
register_char_driver_qapi("stdio", CHARDEV_BACKEND_KIND_STDIO,
qemu_chr_parse_pipe);
register_char_driver_qapi("mux", CHARDEV_BACKEND_KIND_MUX,
qemu_chr_parse_mux);
+ /* Bug-compatibility: */
+ register_char_driver_qapi("memory", CHARDEV_BACKEND_KIND_MEMORY,
+ qemu_chr_parse_ringbuf);
+ /* this must be done after machine init, since we register FEs with muxes
+ * as part of realize functions like serial_isa_realizefn when -nographic
+ * is specified
+ */
+ qemu_add_machine_init_done_notifier(&muxes_realize_notify);
}
type_init(register_types);
projects / qemu.git / blobdiff