-> { "execute": "cont" }
<- { "return": {} }
+EQMP
+
+ {
+ .name = "system_wakeup",
+ .args_type = "",
+ .mhandler.cmd_new = qmp_marshal_input_system_wakeup,
+ },
+
+SQMP
+system_wakeup
+-------------
+
+Wakeup guest from suspend.
+
+Arguments: None.
+
+Example:
+
+-> { "execute": "system_wakeup" }
+<- { "return": {} }
+
EQMP
{
{
.name = "device_del",
.args_type = "id:s",
- .params = "device",
- .help = "remove device",
- .user_print = monitor_user_noop,
- .mhandler.cmd_new = do_device_del,
+ .mhandler.cmd_new = qmp_marshal_input_device_del,
},
SQMP
Note: inject-nmi is only supported for x86 guest currently, it will
returns "Unsupported" error for non-x86 guest.
+EQMP
+
+ {
+ .name = "xen-save-devices-state",
+ .args_type = "filename:F",
+ .mhandler.cmd_new = qmp_marshal_input_xen_save_devices_state,
+ },
+
+SQMP
+xen-save-devices-state
+-------
+
+Save the state of all devices to file. The RAM and the block devices
+of the VM are not saved by this command.
+
+Arguments:
+
+- "filename": the file to save the state of the devices to as binary
+data. See xen-save-devices-state.txt for a description of the binary
+format.
+
+Example:
+
+-> { "execute": "xen-save-devices-state",
+ "arguments": { "filename": "/tmp/save" } }
+<- { "return": {} }
+
EQMP
{
.name = "migrate",
.args_type = "detach:-d,blk:-b,inc:-i,uri:s",
- .params = "[-d] [-b] [-i] uri",
- .help = "migrate to URI (using -d to not wait for completion)"
- "\n\t\t\t -b for migration without shared storage with"
- " full copy of disk\n\t\t\t -i for migration without "
- "shared storage with incremental copy of disk "
- "(base image shared between src and destination)",
- .user_print = monitor_user_noop,
- .mhandler.cmd_new = do_migrate,
+ .mhandler.cmd_new = qmp_marshal_input_migrate,
},
SQMP
"port": 1234 } }
<- { "return": {} }
+EQMP
+
+ {
+ .name = "dump-guest-memory",
+ .args_type = "paging:b,protocol:s,begin:i?,end:i?",
+ .params = "-p protocol [begin] [length]",
+ .help = "dump guest memory to file",
+ .user_print = monitor_user_noop,
+ .mhandler.cmd_new = qmp_marshal_input_dump_guest_memory,
+ },
+
+SQMP
+dump
+
+
+Dump guest memory to file. The file can be processed with crash or gdb.
+
+Arguments:
+
+- "paging": do paging to get guest's memory mapping (json-bool)
+- "protocol": destination file(started with "file:") or destination file
+ descriptor (started with "fd:") (json-string)
+- "begin": the starting physical address. It's optional, and should be specified
+ with length together (json-int)
+- "length": the memory size, in bytes. It's optional, and should be specified
+ with begin together (json-int)
+
+Example:
+
+-> { "execute": "dump-guest-memory", "arguments": { "protocol": "fd:dump" } }
+<- { "return": {} }
+
+Notes:
+
+(1) All boolean arguments default to false
+
EQMP
{
.name = "netdev_add",
.args_type = "netdev:O",
- .params = "[user|tap|socket],id=str[,prop=value][,...]",
- .help = "add host network device",
- .user_print = monitor_user_noop,
- .mhandler.cmd_new = do_netdev_add,
+ .mhandler.cmd_new = qmp_netdev_add,
},
SQMP
{
.name = "netdev_del",
.args_type = "id:s",
- .params = "id",
- .help = "remove host network device",
- .user_print = monitor_user_noop,
- .mhandler.cmd_new = do_netdev_del,
+ .mhandler.cmd_new = qmp_marshal_input_netdev_del,
},
SQMP
EQMP
{
- .name = "block_stream",
- .args_type = "device:B,base:s?",
+ .name = "block-stream",
+ .args_type = "device:B,base:s?,speed:o?",
.mhandler.cmd_new = qmp_marshal_input_block_stream,
},
{
- .name = "block_job_set_speed",
- .args_type = "device:B,value:o",
+ .name = "block-job-set-speed",
+ .args_type = "device:B,speed:o",
.mhandler.cmd_new = qmp_marshal_input_block_job_set_speed,
},
{
- .name = "block_job_cancel",
+ .name = "block-job-cancel",
.args_type = "device:B",
.mhandler.cmd_new = qmp_marshal_input_block_job_cancel,
},
+ {
+ .name = "transaction",
+ .args_type = "actions:q",
+ .mhandler.cmd_new = qmp_marshal_input_transaction,
+ },
+
+SQMP
+transaction
+-----------
+
+Atomically operate on one or more block devices. The only supported
+operation for now is snapshotting. If there is any failure performing
+any of the operations, all snapshots for the group are abandoned, and
+the original disks pre-snapshot attempt are used.
+
+A list of dictionaries is accepted, that contains the actions to be performed.
+For snapshots this is the device, the file to use for the new snapshot,
+and the format. The default format, if not specified, is qcow2.
+
+Each new snapshot defaults to being created by QEMU (wiping any
+contents if the file already exists), but it is also possible to reuse
+an externally-created file. In the latter case, you should ensure that
+the new image file has the same contents as the current one; QEMU cannot
+perform any meaningful check. Typically this is achieved by using the
+current image file as the backing file for the new image.
+
+Arguments:
+
+actions array:
+ - "type": the operation to perform. The only supported
+ value is "blockdev-snapshot-sync". (json-string)
+ - "data": a dictionary. The contents depend on the value
+ of "type". When "type" is "blockdev-snapshot-sync":
+ - "device": device name to snapshot (json-string)
+ - "snapshot-file": name of new image file (json-string)
+ - "format": format of new image (json-string, optional)
+ - "mode": whether and how QEMU should create the snapshot file
+ (NewImageMode, optional, default "absolute-paths")
+
+Example:
+
+-> { "execute": "transaction",
+ "arguments": { "actions": [
+ { 'type': 'blockdev-snapshot-sync', 'data' : { "device": "ide-hd0",
+ "snapshot-file": "/some/place/my-image",
+ "format": "qcow2" } },
+ { 'type': 'blockdev-snapshot-sync', 'data' : { "device": "ide-hd1",
+ "snapshot-file": "/some/place/my-image2",
+ "mode": "existing",
+ "format": "qcow2" } } ] } }
+<- { "return": {} }
+
+EQMP
{
.name = "blockdev-snapshot-sync",
- .args_type = "device:B,snapshot-file:s,format:s?",
+ .args_type = "device:B,snapshot-file:s,format:s?,mode:s?",
.mhandler.cmd_new = qmp_marshal_input_blockdev_snapshot_sync,
},
- "device": device name to snapshot (json-string)
- "snapshot-file": name of new image file (json-string)
+- "mode": whether and how QEMU should create the snapshot file
+ (NewImageMode, optional, default "absolute-paths")
- "format": format of new image (json-string, optional)
Example:
{
.name = "add_client",
- .args_type = "protocol:s,fdname:s,skipauth:b?",
- .params = "protocol fdname skipauth",
+ .args_type = "protocol:s,fdname:s,skipauth:b?,tls:b?",
+ .params = "protocol fdname skipauth tls",
.help = "add a graphics client",
.user_print = monitor_user_noop,
.mhandler.cmd_new = add_graphics_client,
- "protocol": protocol name (json-string)
- "fdname": file descriptor name (json-string)
+- "skipauth": whether to skip authentication (json-bool, optional)
+- "tls": whether to perform TLS (json-bool, optional)
Example:
.mhandler.cmd_new = qmp_marshal_input_query_commands,
},
+SQMP
+query-events
+--------------
+
+List QMP available events.
+
+Each event is represented by a json-object, the returned value is a json-array
+of all events.
+
+Each json-object contains:
+
+- "name": event's name (json-string)
+
+Example:
+
+-> { "execute": "query-events" }
+<- {
+ "return":[
+ {
+ "name":"SHUTDOWN"
+ },
+ {
+ "name":"RESET"
+ }
+ ]
+ }
+
+Note: This example has been shortened as the real response is too long.
+
+EQMP
+
+ {
+ .name = "query-events",
+ .args_type = "",
+ .mhandler.cmd_new = qmp_marshal_input_query_events,
+ },
+
SQMP
query-chardev
-------------
{
.name = "qom-set",
- .args_type = "path:s,property:s,opts:O",
+ .args_type = "path:s,property:s,value:q",
.mhandler.cmd_new = qmp_qom_set,
},
.args_type = "password:s",
.mhandler.cmd_new = qmp_marshal_input_change_vnc_password,
},
+ {
+ .name = "qom-list-types",
+ .args_type = "implements:s?,abstract:b?",
+ .mhandler.cmd_new = qmp_marshal_input_qom_list_types,
+ },
projects / qemu.git / blobdiff