Luminary board input support.

[qemu.git] / qemu-doc.texi

diff --git a/qemu-doc.texi b/qemu-doc.texi
index 6233ad1e913ddc71db443e5c73becd6d5f679fb8..92dfd5c658a7e2200081fed7b70f5ea3e801de6a 100644 (file)
--- a/qemu-doc.texi
+++ b/qemu-doc.texi
@@ -77,12 +77,15 @@ For system emulation, the following hardware targets are supported:
 @item Sun4m (32-bit Sparc processor)
 @item Sun4u (64-bit Sparc processor, in progress)
 @item Malta board (32-bit MIPS processor)
-@item ARM Integrator/CP (ARM926E, 1026E or 946E processor)
-@item ARM Versatile baseboard (ARM926E)
-@item ARM RealView Emulation baseboard (ARM926EJ-S)
+@item ARM Integrator/CP (ARM)
+@item ARM Versatile baseboard (ARM)
+@item ARM RealView Emulation baseboard (ARM)
 @item Spitz, Akita, Borzoi and Terrier PDAs (PXA270 processor)
+@item Luminary Micro LM3S811EVB (ARM Cortex-M3)
+@item Luminary Micro LM3S6965EVB (ARM Cortex-M3)
 @item Freescale MCF5208EVB (ColdFire V2).
 @item Arnewsh MCF5206 evaluation board (ColdFire V2).
+@item Palm Tungsten|E PDA (OMAP310 processor)
 @end itemize
 
 For user emulation, x86, PowerPC, ARM, MIPS, Sparc32/64 and ColdFire(m68k) CPUs are supported.
@@ -242,7 +245,8 @@ Set virtual RAM size to @var{megs} megabytes. Default is 128 MB.
 
 @item -smp n
 Simulate an SMP system with @var{n} CPUs. On the PC target, up to 255
-CPUs are supported.
+CPUs are supported. On Sparc32 target, Linux limits the number of usable CPUs
+to 4.
 
 @item -audio-help
 
@@ -266,6 +270,11 @@ Set the real time clock to local time (the default is to UTC
 time). This option is needed to have correct date in MS-DOS or
 Windows.
 
+@item -startdate date
+Set the initial date of the real time clock. Valid format for
+@var{date} are: @code{now} or @code{2006-06-17T16:01:21} or
+@code{2006-06-17}. The default value is @code{now}.
+
 @item -pidfile file
 Store the QEMU process PID in @var{file}. It is useful if you launch QEMU
 from a script.
@@ -1940,8 +1949,10 @@ More information is available at
 @node Sparc32 System emulator
 @section Sparc32 System emulator
 
-Use the executable @file{qemu-system-sparc} to simulate a SparcStation 5
-or SparcStation 10 (sun4m architecture). The emulation is somewhat complete.
+Use the executable @file{qemu-system-sparc} to simulate a SPARCstation
+5, SPARCstation 10, or SPARCserver 600MP (sun4m architecture). The
+emulation is somewhat complete.  SMP up to 16 CPUs is supported, but
+Linux limits the number of usable CPUs to 4.
 
 QEMU emulates the following sun4m peripherals:
 
@@ -1960,12 +1971,14 @@ and power/reset logic
 @item
 ESP SCSI controller with hard disk and CD-ROM support
 @item
-Floppy drive
+Floppy drive (not on SS-600MP)
 @item
 CS4231 sound device (only on SS-5, not working yet)
 @end itemize
 
-The number of peripherals is fixed in the architecture.
+The number of peripherals is fixed in the architecture.  Maximum
+memory size depends on the machine type, for SS-5 it is 256MB and for
+SS-10 and SS-600MP 2047MB.
 
 Since version 0.8.2, QEMU uses OpenBIOS
 @url{http://www.openbios.org/}. OpenBIOS is a free (GPL v2) portable
@@ -2107,7 +2120,7 @@ devices:
 
 @itemize @minus
 @item
-ARM926E, ARM1026E or ARM946E CPU
+ARM926E, ARM1026E, ARM946E, ARM1136 or Cortex-A8 CPU
 @item
 Two PL011 UARTs
 @item
@@ -2124,7 +2137,7 @@ The ARM Versatile baseboard is emulated with the following devices:
 
 @itemize @minus
 @item
-ARM926E CPU
+ARM926E, ARM1136 or Cortex-A8 CPU
 @item
 PL190 Vectored Interrupt Controller
 @item
@@ -2153,7 +2166,7 @@ The ARM RealView Emulation baseboard is emulated with the following devices:
 
 @itemize @minus
 @item
-ARM926E CPU
+ARM926E, ARM1136, ARM11MPCORE(x4) or Cortex-A8 CPU
 @item
 ARM AMBA Generic/Distributed Interrupt Controller
 @item
@@ -2204,6 +2217,57 @@ Three on-chip UARTs
 WM8750 audio CODEC on I@math{^2}C and I@math{^2}S busses
 @end itemize
 
+The Palm Tungsten|E PDA (codename "Cheetah") emulation includes the
+following elements:
+
+@itemize @minus
+@item
+Texas Instruments OMAP310 System-on-chip (ARM 925T core)
+@item
+ROM and RAM memories (ROM firmware image can be loaded with -option-rom)
+@item
+On-chip LCD controller
+@item
+On-chip Real Time Clock
+@item
+TI TSC2102i touchscreen controller / analog-digital converter / Audio
+CODEC, connected through MicroWire and I@math{^2}S busses
+@item
+GPIO-connected matrix keypad
+@item
+Secure Digital card connected to OMAP MMC/SD host
+@item
+Three on-chip UARTs
+@end itemize
+
+The Luminary Micro Stellaris LM3S811EVB emulation includes the following
+devices:
+
+@itemize @minus
+@item
+Cortex-M3 CPU core.
+@item
+64k Flash and 8k SRAM.
+@item
+Timers, UARTs, ADC and I@math{^2}C interface.
+@item
+OSRAM Pictiva 96x16 OLED with SSD0303 controller on I@math{^2}C bus.
+@end itemize
+
+The Luminary Micro Stellaris LM3S6965EVB emulation includes the following
+devices:
+
+@itemize @minus
+@item
+Cortex-M3 CPU core.
+@item
+256k Flash and 64k SRAM.
+@item
+Timers, UARTs, ADC, I@math{^2}C and SSI interfaces.
+@item
+OSRAM Pictiva 128x64 OLED with SSD0323 controller connected via SSI.
+@end itemize
+
 A Linux 2.6 test image is available on the QEMU web site. More
 information is available in the QEMU mailing-list archive.
 
@@ -2382,6 +2446,12 @@ coldfire uClinux bFLT format binaries.
 
 The binary format is detected automatically.
 
+@command{qemu-sparc32plus} can execute Sparc32 and SPARC32PLUS binaries
+(Sparc64 CPU, 32 bit ABI).
+
+@command{qemu-sparc64} can execute some Sparc64 (Sparc64 CPU, 64 bit ABI) and
+SPARC32PLUS binaries (Sparc64 CPU, 32 bit ABI).
+
 @node Mac OS X/Darwin User space emulator
 @section Mac OS X/Darwin User space emulator