##
{ 'command': 'query-pci', 'returns': ['PciInfo'] }
+##
+# @BlockJobInfo:
+#
+# Information about a long-running block device operation.
+#
+# @type: the job type ('stream' for image streaming)
+#
+# @device: the block device name
+#
+# @len: the maximum progress value
+#
+# @offset: the current progress value
+#
+# @speed: the rate limit, bytes per second
+#
+# Since: 1.1
+##
+{ 'type': 'BlockJobInfo',
+ 'data': {'type': 'str', 'device': 'str', 'len': 'int',
+ 'offset': 'int', 'speed': 'int'} }
+
+##
+# @query-block-jobs:
+#
+# Return information about long-running block device operations.
+#
+# Returns: a list of @BlockJobInfo for each active block job
+#
+# Since: 1.1
+##
+{ 'command': 'query-block-jobs', 'returns': ['BlockJobInfo'] }
+
##
# @quit:
#
#
# Returns: nothing on success
# If @device is not a valid block device, DeviceNotFound
-#
-# Notes: This command returns UndefinedError in a number of error conditions.
+# If @size is negative, InvalidParameterValue
+# If the block device has no medium inserted, DeviceHasNoMedium
+# If the block device does not support resize, Unsupported
+# If the block device is read-only, DeviceIsReadOnly
+# If a long-running operation is using the device, DeviceInUse
#
# Since: 0.14.0
##
{ 'command': 'qom-set',
'data': { 'path': 'str', 'property': 'str', 'value': 'visitor' },
'gen': 'no' }
+
+##
+# @set_password:
+#
+# Sets the password of a remote display session.
+#
+# @protocol: `vnc' to modify the VNC server password
+# `spice' to modify the Spice server password
+#
+# @password: the new password
+#
+# @connected: #optional how to handle existing clients when changing the
+# password. If nothing is specified, defaults to `keep'
+# `fail' to fail the command if clients are connected
+# `disconnect' to disconnect existing clients
+# `keep' to maintain existing clients
+#
+# Returns: Nothing on success
+# If Spice is not enabled, DeviceNotFound
+# If @protocol does not support connected, InvalidParameter
+# If @protocol is invalid, InvalidParameter
+# If any other error occurs, SetPasswdFailed
+#
+# Notes: If VNC is not enabled, SetPasswdFailed is returned.
+#
+# Since: 0.14.0
+##
+{ 'command': 'set_password',
+ 'data': {'protocol': 'str', 'password': 'str', '*connected': 'str'} }
+
+##
+# @expire_password:
+#
+# Expire the password of a remote display server.
+#
+# @protocol: the name of the remote display protocol `vnc' or `spice'
+#
+# @time: when to expire the password.
+# `now' to expire the password immediately
+# `never' to cancel password expiration
+# `+INT' where INT is the number of seconds from now (integer)
+# `INT' where INT is the absolute time in seconds
+#
+# Returns: Nothing on success
+# If @protocol is `spice' and Spice is not active, DeviceNotFound
+# If an error occurs setting password expiration, SetPasswdFailed
+# If @protocol is not `spice' or 'vnc', InvalidParameter
+#
+# Since: 0.14.0
+#
+# Notes: Time is relative to the server and currently there is no way to
+# coordinate server time with client time. It is not recommended to
+# use the absolute time version of the @time parameter unless you're
+# sure you are on the same machine as the QEMU instance.
+##
+{ 'command': 'expire_password', 'data': {'protocol': 'str', 'time': 'str'} }
+
+##
+# @eject:
+#
+# Ejects a device from a removable drive.
+#
+# @device: The name of the device
+#
+# @force: @optional If true, eject regardless of whether the drive is locked.
+# If not specified, the default value is false.
+#
+# Returns: Nothing on success
+# If @device is not a valid block device, DeviceNotFound
+# If @device is not removable and @force is false, DeviceNotRemovable
+# If @force is false and @device is locked, DeviceLocked
+#
+# Notes: Ejecting a device will no media results in success
+#
+# Since: 0.14.0
+##
+{ 'command': 'eject', 'data': {'device': 'str', '*force': 'bool'} }
+
+##
+# @change-vnc-password:
+#
+# Change the VNC server password.
+#
+# @target: the new password to use with VNC authentication
+#
+# Since: 1.1
+#
+# Notes: An empty password in this command will set the password to the empty
+# string. Existing clients are unaffected by executing this command.
+##
+{ 'command': 'change-vnc-password', 'data': {'password': 'str'} }
+
+##
+# @change:
+#
+# This command is multiple commands multiplexed together.
+#
+# @device: This is normally the name of a block device but it may also be 'vnc'.
+# when it's 'vnc', then sub command depends on @target
+#
+# @target: If @device is a block device, then this is the new filename.
+# If @device is 'vnc', then if the value 'password' selects the vnc
+# change password command. Otherwise, this specifies a new server URI
+# address to listen to for VNC connections.
+#
+# @arg: If @device is a block device, then this is an optional format to open
+# the device with.
+# If @device is 'vnc' and @target is 'password', this is the new VNC
+# password to set. If this argument is an empty string, then no future
+# logins will be allowed.
+#
+# Returns: Nothing on success.
+# If @device is not a valid block device, DeviceNotFound
+# If @format is not a valid block format, InvalidBlockFormat
+# If the new block device is encrypted, DeviceEncrypted. Note that
+# if this error is returned, the device has been opened successfully
+# and an additional call to @block_passwd is required to set the
+# device's password. The behavior of reads and writes to the block
+# device between when these calls are executed is undefined.
+#
+# Notes: It is strongly recommended that this interface is not used especially
+# for changing block devices.
+#
+# Since: 0.14.0
+##
+{ 'command': 'change',
+ 'data': {'device': 'str', 'target': 'str', '*arg': 'str'} }
+
+##
+# @block_set_io_throttle:
+#
+# Change I/O throttle limits for a block drive.
+#
+# @device: The name of the device
+#
+# @bps: total throughput limit in bytes per second
+#
+# @bps_rd: read throughput limit in bytes per second
+#
+# @bps_wr: write throughput limit in bytes per second
+#
+# @iops: total I/O operations per second
+#
+# @ops_rd: read I/O operations per second
+#
+# @iops_wr: write I/O operations per second
+#
+# Returns: Nothing on success
+# If @device is not a valid block device, DeviceNotFound
+# If the argument combination is invalid, InvalidParameterCombination
+#
+# Since: 1.1
+##
+{ 'command': 'block_set_io_throttle',
+ 'data': { 'device': 'str', 'bps': 'int', 'bps_rd': 'int', 'bps_wr': 'int',
+ 'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int' } }
+
+# @block_stream:
+#
+# Copy data from a backing file into a block device.
+#
+# The block streaming operation is performed in the background until the entire
+# backing file has been copied. This command returns immediately once streaming
+# has started. The status of ongoing block streaming operations can be checked
+# with query-block-jobs. The operation can be stopped before it has completed
+# using the block_job_cancel command.
+#
+# If a base file is specified then sectors are not copied from that base file and
+# its backing chain. When streaming completes the image file will have the base
+# file as its backing file. This can be used to stream a subset of the backing
+# file chain instead of flattening the entire image.
+#
+# On successful completion the image file is updated to drop the backing file
+# and the BLOCK_JOB_COMPLETED event is emitted.
+#
+# @device: the device name
+#
+# @base: #optional the common backing file name
+#
+# Returns: Nothing on success
+# If streaming is already active on this device, DeviceInUse
+# If @device does not exist, DeviceNotFound
+# If image streaming is not supported by this device, NotSupported
+# If @base does not exist, BaseNotFound
+#
+# Since: 1.1
+##
+{ 'command': 'block_stream', 'data': { 'device': 'str', '*base': 'str' } }
+
+##
+# @block_job_set_speed:
+#
+# Set maximum speed for a background block operation.
+#
+# This command can only be issued when there is an active block job.
+#
+# Throttling can be disabled by setting the speed to 0.
+#
+# @device: the device name
+#
+# @value: the maximum speed, in bytes per second
+#
+# Returns: Nothing on success
+# If the job type does not support throttling, NotSupported
+# If streaming is not active on this device, DeviceNotActive
+#
+# Since: 1.1
+##
+{ 'command': 'block_job_set_speed',
+ 'data': { 'device': 'str', 'value': 'int' } }
+
+##
+# @block_job_cancel:
+#
+# Stop an active block streaming operation.
+#
+# This command returns immediately after marking the active block streaming
+# operation for cancellation. It is an error to call this command if no
+# operation is in progress.
+#
+# The operation will cancel as soon as possible and then emit the
+# BLOCK_JOB_CANCELLED event. Before that happens the job is still visible when
+# enumerated using query-block-jobs.
+#
+# The image file retains its backing file unless the streaming operation happens
+# to complete just as it is being cancelled.
+#
+# A new block streaming operation can be started at a later time to finish
+# copying all data from the backing file.
+#
+# @device: the device name
+#
+# Returns: Nothing on success
+# If streaming is not active on this device, DeviceNotActive
+# If cancellation already in progress, DeviceInUse
+#
+# Since: 1.1
+##
+{ 'command': 'block_job_cancel', 'data': { 'device': 'str' } }
+
+##
+# @ObjectTypeInfo:
+#
+# This structure describes a search result from @qom-list-types
+#
+# @name: the type name found in the search
+#
+# Since: 1.1
+#
+# Notes: This command is experimental and may change syntax in future releases.
+##
+{ 'type': 'ObjectTypeInfo',
+ 'data': { 'name': 'str' } }
+
+##
+# @qom-list-types:
+#
+# This command will return a list of types given search parameters
+#
+# @implements: if specified, only return types that implement this type name
+#
+# @abstract: if true, include abstract types in the results
+#
+# Returns: a list of @ObjectTypeInfo or an empty list if no results are found
+#
+# Since: 1.1
+#
+# Notes: This command is experimental and may change syntax in future releases.
+##
+{ 'command': 'qom-list-types',
+ 'data': { '*implements': 'str', '*abstract': 'bool' },
+ 'returns': [ 'ObjectTypeInfo' ] }
projects / qemu.git / blobdiff