* This code is licenced under the LGPL.
*
* Note that this file only handles the SCSI architecture model and device
- * commands. Emultion of interface/link layer protocols is handled by
- * the host adapter emulation.
+ * commands. Emulation of interface/link layer protocols is handled by
+ * the host adapter emulator.
*/
+#include <qemu-common.h>
+#include <sysemu.h>
//#define DEBUG_SCSI
#ifdef DEBUG_SCSI
#define BADF(fmt, args...) \
do { fprintf(stderr, "scsi-disk: " fmt , ##args); } while (0)
-#include "vl.h"
+#include "qemu-common.h"
+#include "block.h"
+#include "scsi-disk.h"
#define SENSE_NO_SENSE 0
#define SENSE_NOT_READY 2
#define SENSE_HARDWARE_ERROR 4
#define SENSE_ILLEGAL_REQUEST 5
-#define SCSI_DMA_BUF_SIZE 65536
+#define STATUS_GOOD 0
+#define STATUS_CHECK_CONDITION 2
+
+#define SCSI_DMA_BUF_SIZE 131072
+#define SCSI_MAX_INQUIRY_LEN 256
+
+#define SCSI_REQ_STATUS_RETRY 0x01
typedef struct SCSIRequest {
- SCSIDevice *dev;
+ SCSIDeviceState *dev;
uint32_t tag;
- /* ??? We should probably keep track of whether the data trasfer is
+ /* ??? We should probably keep track of whether the data transfer is
a read or a write. Currently we rely on the host getting it right. */
/* Both sector and sector_count are in terms of qemu 512 byte blocks. */
- int sector;
- int sector_count;
- /* The amounnt of data in the buffer. */
- int buf_len;
- uint8_t dma_buf[SCSI_DMA_BUF_SIZE];
+ uint64_t sector;
+ uint32_t sector_count;
+ struct iovec iov;
+ QEMUIOVector qiov;
BlockDriverAIOCB *aiocb;
struct SCSIRequest *next;
+ uint32_t status;
} SCSIRequest;
-struct SCSIDevice
+struct SCSIDeviceState
{
BlockDriverState *bdrv;
SCSIRequest *requests;
/* The qemu block layer uses a fixed 512 byte sector size.
This is the number of 512 byte blocks in a single scsi sector. */
int cluster_size;
+ uint64_t max_lba;
int sense;
int tcq;
/* Completion functions may be called from either scsi_{read,write}_data
or from the AIO completion routines. */
scsi_completionfn completion;
void *opaque;
+ char drive_serial_str[21];
};
/* Global pool of SCSIRequest structures. */
static SCSIRequest *free_requests = NULL;
-static SCSIRequest *scsi_new_request(SCSIDevice *s, uint32_t tag)
+static SCSIRequest *scsi_new_request(SCSIDeviceState *s, uint32_t tag)
{
SCSIRequest *r;
free_requests = r->next;
} else {
r = qemu_malloc(sizeof(SCSIRequest));
+ r->iov.iov_base = qemu_memalign(512, SCSI_DMA_BUF_SIZE);
}
r->dev = s;
r->tag = tag;
r->sector_count = 0;
- r->buf_len = 0;
+ r->iov.iov_len = 0;
r->aiocb = NULL;
+ r->status = 0;
r->next = s->requests;
s->requests = r;
static void scsi_remove_request(SCSIRequest *r)
{
SCSIRequest *last;
- SCSIDevice *s = r->dev;
+ SCSIDeviceState *s = r->dev;
if (s->requests == r) {
s->requests = r->next;
free_requests = r;
}
-static SCSIRequest *scsi_find_request(SCSIDevice *s, uint32_t tag)
+static SCSIRequest *scsi_find_request(SCSIDeviceState *s, uint32_t tag)
{
SCSIRequest *r;
}
/* Helper function for command completion. */
-static void scsi_command_complete(SCSIRequest *r, int sense)
+static void scsi_command_complete(SCSIRequest *r, int status, int sense)
{
- SCSIDevice *s = r->dev;
+ SCSIDeviceState *s = r->dev;
uint32_t tag;
- DPRINTF("Command complete tag=0x%x sense=%d\n", r->tag, sense);
+ DPRINTF("Command complete tag=0x%x status=%d sense=%d\n", r->tag, status, sense);
s->sense = sense;
tag = r->tag;
scsi_remove_request(r);
- s->completion(s->opaque, SCSI_REASON_DONE, tag, sense);
+ s->completion(s->opaque, SCSI_REASON_DONE, tag, status);
}
/* Cancel a pending data transfer. */
-void scsi_cancel_io(SCSIDevice *s, uint32_t tag)
+static void scsi_cancel_io(SCSIDevice *d, uint32_t tag)
{
+ SCSIDeviceState *s = d->state;
SCSIRequest *r;
DPRINTF("Cancel tag=0x%x\n", tag);
r = scsi_find_request(s, tag);
static void scsi_read_complete(void * opaque, int ret)
{
SCSIRequest *r = (SCSIRequest *)opaque;
- SCSIDevice *s = r->dev;
+ SCSIDeviceState *s = r->dev;
if (ret) {
DPRINTF("IO error\n");
- scsi_command_complete(r, SENSE_HARDWARE_ERROR);
+ s->completion(s->opaque, SCSI_REASON_DATA, r->tag, 0);
+ scsi_command_complete(r, STATUS_CHECK_CONDITION, SENSE_NO_SENSE);
return;
}
- DPRINTF("Data ready tag=0x%x len=%d\n", r->tag, r->buf_len);
+ DPRINTF("Data ready tag=0x%x len=%d\n", r->tag, r->iov.iov_len);
- s->completion(s->opaque, SCSI_REASON_DATA, r->tag, r->buf_len);
+ s->completion(s->opaque, SCSI_REASON_DATA, r->tag, r->iov.iov_len);
}
/* Read more data from scsi device into buffer. */
-void scsi_read_data(SCSIDevice *s, uint32_t tag)
+static void scsi_read_data(SCSIDevice *d, uint32_t tag)
{
+ SCSIDeviceState *s = d->state;
SCSIRequest *r;
uint32_t n;
if (!r) {
BADF("Bad read tag 0x%x\n", tag);
/* ??? This is the wrong error. */
- scsi_command_complete(r, SENSE_HARDWARE_ERROR);
+ scsi_command_complete(r, STATUS_CHECK_CONDITION, SENSE_HARDWARE_ERROR);
return;
}
if (r->sector_count == (uint32_t)-1) {
- DPRINTF("Read buf_len=%d\n", r->buf_len);
+ DPRINTF("Read buf_len=%d\n", r->iov.iov_len);
r->sector_count = 0;
- s->completion(s->opaque, SCSI_REASON_DATA, r->tag, r->buf_len);
+ s->completion(s->opaque, SCSI_REASON_DATA, r->tag, r->iov.iov_len);
return;
}
DPRINTF("Read sector_count=%d\n", r->sector_count);
if (r->sector_count == 0) {
- scsi_command_complete(r, SENSE_NO_SENSE);
+ scsi_command_complete(r, STATUS_GOOD, SENSE_NO_SENSE);
return;
}
if (n > SCSI_DMA_BUF_SIZE / 512)
n = SCSI_DMA_BUF_SIZE / 512;
- r->buf_len = n * 512;
- r->aiocb = bdrv_aio_read(s->bdrv, r->sector, r->dma_buf, n,
- scsi_read_complete, r);
+ r->iov.iov_len = n * 512;
+ qemu_iovec_init_external(&r->qiov, &r->iov, 1);
+ r->aiocb = bdrv_aio_readv(s->bdrv, r->sector, &r->qiov, n,
+ scsi_read_complete, r);
if (r->aiocb == NULL)
- scsi_command_complete(r, SENSE_HARDWARE_ERROR);
+ scsi_command_complete(r, STATUS_CHECK_CONDITION, SENSE_HARDWARE_ERROR);
r->sector += n;
r->sector_count -= n;
}
+static int scsi_handle_write_error(SCSIRequest *r, int error)
+{
+ BlockInterfaceErrorAction action = drive_get_onerror(r->dev->bdrv);
+
+ if (action == BLOCK_ERR_IGNORE)
+ return 0;
+
+ if ((error == ENOSPC && action == BLOCK_ERR_STOP_ENOSPC)
+ || action == BLOCK_ERR_STOP_ANY) {
+ r->status |= SCSI_REQ_STATUS_RETRY;
+ vm_stop(0);
+ } else {
+ scsi_command_complete(r, STATUS_CHECK_CONDITION,
+ SENSE_HARDWARE_ERROR);
+ }
+
+ return 1;
+}
+
static void scsi_write_complete(void * opaque, int ret)
{
SCSIRequest *r = (SCSIRequest *)opaque;
- SCSIDevice *s = r->dev;
+ SCSIDeviceState *s = r->dev;
uint32_t len;
+ uint32_t n;
+
+ r->aiocb = NULL;
if (ret) {
- fprintf(stderr, "scsi-disc: IO write error\n");
- exit(1);
+ if (scsi_handle_write_error(r, -ret))
+ return;
}
- r->aiocb = NULL;
+ n = r->iov.iov_len / 512;
+ r->sector += n;
+ r->sector_count -= n;
if (r->sector_count == 0) {
- scsi_command_complete(r, SENSE_NO_SENSE);
+ scsi_command_complete(r, STATUS_GOOD, SENSE_NO_SENSE);
} else {
len = r->sector_count * 512;
if (len > SCSI_DMA_BUF_SIZE) {
len = SCSI_DMA_BUF_SIZE;
}
- r->buf_len = len;
+ r->iov.iov_len = len;
DPRINTF("Write complete tag=0x%x more=%d\n", r->tag, len);
s->completion(s->opaque, SCSI_REASON_DATA, r->tag, len);
}
}
+static void scsi_write_request(SCSIRequest *r)
+{
+ SCSIDeviceState *s = r->dev;
+ uint32_t n;
+
+ n = r->iov.iov_len / 512;
+ if (n) {
+ qemu_iovec_init_external(&r->qiov, &r->iov, 1);
+ r->aiocb = bdrv_aio_writev(s->bdrv, r->sector, &r->qiov, n,
+ scsi_write_complete, r);
+ if (r->aiocb == NULL)
+ scsi_command_complete(r, STATUS_CHECK_CONDITION,
+ SENSE_HARDWARE_ERROR);
+ } else {
+ /* Invoke completion routine to fetch data from host. */
+ scsi_write_complete(r, 0);
+ }
+}
+
/* Write data to a scsi device. Returns nonzero on failure.
The transfer may complete asynchronously. */
-int scsi_write_data(SCSIDevice *s, uint32_t tag)
+static int scsi_write_data(SCSIDevice *d, uint32_t tag)
{
+ SCSIDeviceState *s = d->state;
SCSIRequest *r;
- uint32_t n;
DPRINTF("Write data tag=0x%x\n", tag);
r = scsi_find_request(s, tag);
if (!r) {
BADF("Bad write tag 0x%x\n", tag);
- scsi_command_complete(r, SENSE_HARDWARE_ERROR);
+ scsi_command_complete(r, STATUS_CHECK_CONDITION, SENSE_HARDWARE_ERROR);
return 1;
}
+
if (r->aiocb)
BADF("Data transfer already in progress\n");
- n = r->buf_len / 512;
- if (n) {
- r->aiocb = bdrv_aio_write(s->bdrv, r->sector, r->dma_buf, n,
- scsi_write_complete, r);
- if (r->aiocb == NULL)
- scsi_command_complete(r, SENSE_HARDWARE_ERROR);
- r->sector += n;
- r->sector_count -= n;
- } else {
- /* Invoke completion routine to fetch data from host. */
- scsi_write_complete(r, 0);
- }
+
+ scsi_write_request(r);
return 0;
}
+static void scsi_dma_restart_cb(void *opaque, int running, int reason)
+{
+ SCSIDeviceState *s = opaque;
+ SCSIRequest *r = s->requests;
+ if (!running)
+ return;
+
+ while (r) {
+ if (r->status & SCSI_REQ_STATUS_RETRY) {
+ r->status &= ~SCSI_REQ_STATUS_RETRY;
+ scsi_write_request(r);
+ }
+ r = r->next;
+ }
+}
+
/* Return a pointer to the data buffer. */
-uint8_t *scsi_get_buf(SCSIDevice *s, uint32_t tag)
+static uint8_t *scsi_get_buf(SCSIDevice *d, uint32_t tag)
{
+ SCSIDeviceState *s = d->state;
SCSIRequest *r;
r = scsi_find_request(s, tag);
BADF("Bad buffer tag 0x%x\n", tag);
return NULL;
}
- return r->dma_buf;
+ return (uint8_t *)r->iov.iov_base;
}
/* Execute a scsi command. Returns the length of the data expected by the
(eg. disk reads), negative for transfers to the device (eg. disk writes),
and zero if the command does not transfer any data. */
-int32_t scsi_send_command(SCSIDevice *s, uint32_t tag, uint8_t *buf, int lun)
+static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
+ uint8_t *buf, int lun)
{
- int64_t nb_sectors;
- uint32_t lba;
+ SCSIDeviceState *s = d->state;
+ uint64_t nb_sectors;
+ uint64_t lba;
uint32_t len;
int cmdlen;
int is_write;
r = scsi_find_request(s, tag);
if (r) {
BADF("Tag 0x%x already in use\n", tag);
- scsi_cancel_io(s, tag);
+ scsi_cancel_io(d, tag);
}
/* ??? Tags are not unique for different luns. We only implement a
single lun, so this should not matter. */
r = scsi_new_request(s, tag);
- outbuf = r->dma_buf;
+ outbuf = (uint8_t *)r->iov.iov_base;
is_write = 0;
DPRINTF("Command: lun=%d tag=0x%x data=0x%02x", lun, tag, buf[0]);
switch (command >> 5) {
case 0:
- lba = buf[3] | (buf[2] << 8) | ((buf[1] & 0x1f) << 16);
+ lba = (uint64_t) buf[3] | ((uint64_t) buf[2] << 8) |
+ (((uint64_t) buf[1] & 0x1f) << 16);
len = buf[4];
cmdlen = 6;
break;
case 1:
case 2:
- lba = buf[5] | (buf[4] << 8) | (buf[3] << 16) | (buf[2] << 24);
+ lba = (uint64_t) buf[5] | ((uint64_t) buf[4] << 8) |
+ ((uint64_t) buf[3] << 16) | ((uint64_t) buf[2] << 24);
len = buf[8] | (buf[7] << 8);
cmdlen = 10;
break;
case 4:
- lba = buf[5] | (buf[4] << 8) | (buf[3] << 16) | (buf[2] << 24);
+ lba = (uint64_t) buf[9] | ((uint64_t) buf[8] << 8) |
+ ((uint64_t) buf[7] << 16) | ((uint64_t) buf[6] << 24) |
+ ((uint64_t) buf[5] << 32) | ((uint64_t) buf[4] << 40) |
+ ((uint64_t) buf[3] << 48) | ((uint64_t) buf[2] << 56);
len = buf[13] | (buf[12] << 8) | (buf[11] << 16) | (buf[10] << 24);
cmdlen = 16;
break;
case 5:
- lba = buf[5] | (buf[4] << 8) | (buf[3] << 16) | (buf[2] << 24);
+ lba = (uint64_t) buf[5] | ((uint64_t) buf[4] << 8) |
+ ((uint64_t) buf[3] << 16) | ((uint64_t) buf[2] << 24);
len = buf[9] | (buf[8] << 8) | (buf[7] << 16) | (buf[6] << 24);
cmdlen = 12;
break;
if (lun || buf[1] >> 5) {
/* Only LUN 0 supported. */
DPRINTF("Unimplemented LUN %d\n", lun ? lun : buf[1] >> 5);
- goto fail;
+ if (command != 0x03 && command != 0x12) /* REQUEST SENSE and INQUIRY */
+ goto fail;
}
switch (command) {
case 0x0:
DPRINTF("Test Unit Ready\n");
+ if (!bdrv_is_inserted(s->bdrv))
+ goto notready;
break;
case 0x03:
DPRINTF("Request Sense (len %d)\n", len);
if (len < 4)
goto fail;
memset(outbuf, 0, 4);
+ r->iov.iov_len = 4;
+ if (s->sense == SENSE_NOT_READY && len >= 18) {
+ memset(outbuf, 0, 18);
+ r->iov.iov_len = 18;
+ outbuf[7] = 10;
+ /* asc 0x3a, ascq 0: Medium not present */
+ outbuf[12] = 0x3a;
+ outbuf[13] = 0;
+ }
outbuf[0] = 0xf0;
outbuf[1] = 0;
outbuf[2] = s->sense;
- r->buf_len = 4;
break;
case 0x12:
DPRINTF("Inquiry (len %d)\n", len);
- if (len < 36) {
- BADF("Inquiry buffer too small (%d)\n", len);
+ if (buf[1] & 0x2) {
+ /* Command support data - optional, not implemented */
+ BADF("optional INQUIRY command support request not implemented\n");
+ goto fail;
+ }
+ else if (buf[1] & 0x1) {
+ /* Vital product data */
+ uint8_t page_code = buf[2];
+ if (len < 4) {
+ BADF("Error: Inquiry (EVPD[%02X]) buffer size %d is "
+ "less than 4\n", page_code, len);
+ goto fail;
+ }
+
+ switch (page_code) {
+ case 0x00:
+ {
+ /* Supported page codes, mandatory */
+ DPRINTF("Inquiry EVPD[Supported pages] "
+ "buffer size %d\n", len);
+
+ r->iov.iov_len = 0;
+
+ if (bdrv_get_type_hint(s->bdrv) == BDRV_TYPE_CDROM) {
+ outbuf[r->iov.iov_len++] = 5;
+ } else {
+ outbuf[r->iov.iov_len++] = 0;
+ }
+
+ outbuf[r->iov.iov_len++] = 0x00; // this page
+ outbuf[r->iov.iov_len++] = 0x00;
+ outbuf[r->iov.iov_len++] = 3; // number of pages
+ outbuf[r->iov.iov_len++] = 0x00; // list of supported pages (this page)
+ outbuf[r->iov.iov_len++] = 0x80; // unit serial number
+ outbuf[r->iov.iov_len++] = 0x83; // device identification
+ }
+ break;
+ case 0x80:
+ {
+ int l;
+
+ /* Device serial number, optional */
+ if (len < 4) {
+ BADF("Error: EVPD[Serial number] Inquiry buffer "
+ "size %d too small, %d needed\n", len, 4);
+ goto fail;
+ }
+
+ DPRINTF("Inquiry EVPD[Serial number] buffer size %d\n", len);
+ l = MIN(len, strlen(s->drive_serial_str));
+
+ r->iov.iov_len = 0;
+
+ /* Supported page codes */
+ if (bdrv_get_type_hint(s->bdrv) == BDRV_TYPE_CDROM) {
+ outbuf[r->iov.iov_len++] = 5;
+ } else {
+ outbuf[r->iov.iov_len++] = 0;
+ }
+
+ outbuf[r->iov.iov_len++] = 0x80; // this page
+ outbuf[r->iov.iov_len++] = 0x00;
+ outbuf[r->iov.iov_len++] = l;
+ memcpy(&outbuf[r->iov.iov_len], s->drive_serial_str, l);
+ r->iov.iov_len += l;
+ }
+
+ break;
+ case 0x83:
+ {
+ /* Device identification page, mandatory */
+ int max_len = 255 - 8;
+ int id_len = strlen(bdrv_get_device_name(s->bdrv));
+ if (id_len > max_len)
+ id_len = max_len;
+
+ DPRINTF("Inquiry EVPD[Device identification] "
+ "buffer size %d\n", len);
+ r->iov.iov_len = 0;
+ if (bdrv_get_type_hint(s->bdrv) == BDRV_TYPE_CDROM) {
+ outbuf[r->iov.iov_len++] = 5;
+ } else {
+ outbuf[r->iov.iov_len++] = 0;
+ }
+
+ outbuf[r->iov.iov_len++] = 0x83; // this page
+ outbuf[r->iov.iov_len++] = 0x00;
+ outbuf[r->iov.iov_len++] = 3 + id_len;
+
+ outbuf[r->iov.iov_len++] = 0x2; // ASCII
+ outbuf[r->iov.iov_len++] = 0; // not officially assigned
+ outbuf[r->iov.iov_len++] = 0; // reserved
+ outbuf[r->iov.iov_len++] = id_len; // length of data following
+
+ memcpy(&outbuf[r->iov.iov_len],
+ bdrv_get_device_name(s->bdrv), id_len);
+ r->iov.iov_len += id_len;
+ }
+ break;
+ default:
+ BADF("Error: unsupported Inquiry (EVPD[%02X]) "
+ "buffer size %d\n", page_code, len);
+ goto fail;
+ }
+ /* done with EVPD */
+ break;
}
- memset(outbuf, 0, 36);
- if (bdrv_get_type_hint(s->bdrv) == BDRV_TYPE_CDROM) {
+ else {
+ /* Standard INQUIRY data */
+ if (buf[2] != 0) {
+ BADF("Error: Inquiry (STANDARD) page or code "
+ "is non-zero [%02X]\n", buf[2]);
+ goto fail;
+ }
+
+ /* PAGE CODE == 0 */
+ if (len < 5) {
+ BADF("Error: Inquiry (STANDARD) buffer size %d "
+ "is less than 5\n", len);
+ goto fail;
+ }
+
+ if (len < 36) {
+ BADF("Error: Inquiry (STANDARD) buffer size %d "
+ "is less than 36 (TODO: only 5 required)\n", len);
+ }
+ }
+
+ if(len > SCSI_MAX_INQUIRY_LEN)
+ len = SCSI_MAX_INQUIRY_LEN;
+
+ memset(outbuf, 0, len);
+
+ if (lun || buf[1] >> 5) {
+ outbuf[0] = 0x7f; /* LUN not supported */
+ } else if (bdrv_get_type_hint(s->bdrv) == BDRV_TYPE_CDROM) {
outbuf[0] = 5;
outbuf[1] = 0x80;
memcpy(&outbuf[16], "QEMU CD-ROM ", 16);
Some later commands are also implemented. */
outbuf[2] = 3;
outbuf[3] = 2; /* Format 2 */
- outbuf[4] = 31;
+ outbuf[4] = len - 5; /* Additional Length = (Len - 1) - 4 */
/* Sync data transfer and TCQ. */
outbuf[7] = 0x10 | (s->tcq ? 0x02 : 0);
- r->buf_len = 36;
+ r->iov.iov_len = len;
break;
case 0x16:
DPRINTF("Reserve(6)\n");
outbuf[2] = 0x80; /* Readonly. */
}
p += 4;
- if ((page == 8 || page == 0x3f)) {
+ if (page == 4) {
+ int cylinders, heads, secs;
+
+ /* Rigid disk device geometry page. */
+ p[0] = 4;
+ p[1] = 0x16;
+ /* if a geometry hint is available, use it */
+ bdrv_get_geometry_hint(s->bdrv, &cylinders, &heads, &secs);
+ p[2] = (cylinders >> 16) & 0xff;
+ p[3] = (cylinders >> 8) & 0xff;
+ p[4] = cylinders & 0xff;
+ p[5] = heads & 0xff;
+ /* Write precomp start cylinder, disabled */
+ p[6] = (cylinders >> 16) & 0xff;
+ p[7] = (cylinders >> 8) & 0xff;
+ p[8] = cylinders & 0xff;
+ /* Reduced current start cylinder, disabled */
+ p[9] = (cylinders >> 16) & 0xff;
+ p[10] = (cylinders >> 8) & 0xff;
+ p[11] = cylinders & 0xff;
+ /* Device step rate [ns], 200ns */
+ p[12] = 0;
+ p[13] = 200;
+ /* Landing zone cylinder */
+ p[14] = 0xff;
+ p[15] = 0xff;
+ p[16] = 0xff;
+ /* Medium rotation rate [rpm], 5400 rpm */
+ p[20] = (5400 >> 8) & 0xff;
+ p[21] = 5400 & 0xff;
+ p += 0x16;
+ } else if (page == 5) {
+ int cylinders, heads, secs;
+
+ /* Flexible disk device geometry page. */
+ p[0] = 5;
+ p[1] = 0x1e;
+ /* Transfer rate [kbit/s], 5Mbit/s */
+ p[2] = 5000 >> 8;
+ p[3] = 5000 & 0xff;
+ /* if a geometry hint is available, use it */
+ bdrv_get_geometry_hint(s->bdrv, &cylinders, &heads, &secs);
+ p[4] = heads & 0xff;
+ p[5] = secs & 0xff;
+ p[6] = s->cluster_size * 2;
+ p[8] = (cylinders >> 8) & 0xff;
+ p[9] = cylinders & 0xff;
+ /* Write precomp start cylinder, disabled */
+ p[10] = (cylinders >> 8) & 0xff;
+ p[11] = cylinders & 0xff;
+ /* Reduced current start cylinder, disabled */
+ p[12] = (cylinders >> 8) & 0xff;
+ p[13] = cylinders & 0xff;
+ /* Device step rate [100us], 100us */
+ p[14] = 0;
+ p[15] = 1;
+ /* Device step pulse width [us], 1us */
+ p[16] = 1;
+ /* Device head settle delay [100us], 100us */
+ p[17] = 0;
+ p[18] = 1;
+ /* Motor on delay [0.1s], 0.1s */
+ p[19] = 1;
+ /* Motor off delay [0.1s], 0.1s */
+ p[20] = 1;
+ /* Medium rotation rate [rpm], 5400 rpm */
+ p[28] = (5400 >> 8) & 0xff;
+ p[29] = 5400 & 0xff;
+ p += 0x1e;
+ } else if ((page == 8 || page == 0x3f)) {
/* Caching page. */
memset(p,0,20);
p[0] = 8;
p[21] = (16 * 176) & 0xff;
p += 22;
}
- r->buf_len = p - outbuf;
- outbuf[0] = r->buf_len - 4;
- if (r->buf_len > len)
- r->buf_len = len;
+ r->iov.iov_len = p - outbuf;
+ outbuf[0] = r->iov.iov_len - 4;
+ if (r->iov.iov_len > len)
+ r->iov.iov_len = len;
}
break;
case 0x1b:
DPRINTF("Start Stop Unit\n");
+ if (bdrv_get_type_hint(s->bdrv) == BDRV_TYPE_CDROM &&
+ (buf[4] & 2))
+ /* load/eject medium */
+ bdrv_eject(s->bdrv, !(buf[4] & 1));
break;
case 0x1e:
DPRINTF("Prevent Allow Medium Removal (prevent = %d)\n", buf[4] & 3);
/* The normal LEN field for this command is zero. */
memset(outbuf, 0, 8);
bdrv_get_geometry(s->bdrv, &nb_sectors);
+ nb_sectors /= s->cluster_size;
/* Returned value is the address of the last sector. */
if (nb_sectors) {
nb_sectors--;
+ /* Remember the new size for read/write sanity checking. */
+ s->max_lba = nb_sectors;
+ /* Clip to 2TB, instead of returning capacity modulo 2TB. */
+ if (nb_sectors > UINT32_MAX)
+ nb_sectors = UINT32_MAX;
outbuf[0] = (nb_sectors >> 24) & 0xff;
outbuf[1] = (nb_sectors >> 16) & 0xff;
outbuf[2] = (nb_sectors >> 8) & 0xff;
outbuf[5] = 0;
outbuf[6] = s->cluster_size * 2;
outbuf[7] = 0;
- r->buf_len = 8;
+ r->iov.iov_len = 8;
} else {
- scsi_command_complete(r, SENSE_NOT_READY);
+ notready:
+ scsi_command_complete(r, STATUS_CHECK_CONDITION, SENSE_NOT_READY);
return 0;
}
break;
case 0x08:
case 0x28:
- DPRINTF("Read (sector %d, count %d)\n", lba, len);
+ case 0x88:
+ DPRINTF("Read (sector %lld, count %d)\n", lba, len);
+ if (lba > s->max_lba)
+ goto illegal_lba;
r->sector = lba * s->cluster_size;
r->sector_count = len * s->cluster_size;
break;
case 0x0a:
case 0x2a:
- DPRINTF("Write (sector %d, count %d)\n", lba, len);
+ case 0x8a:
+ DPRINTF("Write (sector %lld, count %d)\n", lba, len);
+ if (lba > s->max_lba)
+ goto illegal_lba;
r->sector = lba * s->cluster_size;
r->sector_count = len * s->cluster_size;
is_write = 1;
start_track = buf[6];
bdrv_get_geometry(s->bdrv, &nb_sectors);
DPRINTF("Read TOC (track %d format %d msf %d)\n", start_track, format, msf >> 1);
+ nb_sectors /= s->cluster_size;
switch(format) {
case 0:
toclen = cdrom_read_toc(nb_sectors, outbuf, msf, start_track);
if (toclen > 0) {
if (len > toclen)
len = toclen;
- r->buf_len = len;
+ r->iov.iov_len = len;
break;
}
error_cmd:
case 0x46:
DPRINTF("Get Configuration (rt %d, maxlen %d)\n", buf[1] & 3, len);
memset(outbuf, 0, 8);
- /* ??? This shoud probably return much more information. For now
+ /* ??? This should probably return much more information. For now
just return the basic header indicating the CD-ROM profile. */
outbuf[7] = 8; // CD-ROM
- r->buf_len = 8;
+ r->iov.iov_len = 8;
break;
case 0x56:
DPRINTF("Reserve(10)\n");
if (buf[1] & 3)
goto fail;
break;
+ case 0x9e:
+ /* Service Action In subcommands. */
+ if ((buf[1] & 31) == 0x10) {
+ DPRINTF("SAI READ CAPACITY(16)\n");
+ memset(outbuf, 0, len);
+ bdrv_get_geometry(s->bdrv, &nb_sectors);
+ nb_sectors /= s->cluster_size;
+ /* Returned value is the address of the last sector. */
+ if (nb_sectors) {
+ nb_sectors--;
+ /* Remember the new size for read/write sanity checking. */
+ s->max_lba = nb_sectors;
+ outbuf[0] = (nb_sectors >> 56) & 0xff;
+ outbuf[1] = (nb_sectors >> 48) & 0xff;
+ outbuf[2] = (nb_sectors >> 40) & 0xff;
+ outbuf[3] = (nb_sectors >> 32) & 0xff;
+ outbuf[4] = (nb_sectors >> 24) & 0xff;
+ outbuf[5] = (nb_sectors >> 16) & 0xff;
+ outbuf[6] = (nb_sectors >> 8) & 0xff;
+ outbuf[7] = nb_sectors & 0xff;
+ outbuf[8] = 0;
+ outbuf[9] = 0;
+ outbuf[10] = s->cluster_size * 2;
+ outbuf[11] = 0;
+ /* Protection, exponent and lowest lba field left blank. */
+ r->iov.iov_len = len;
+ } else {
+ scsi_command_complete(r, STATUS_CHECK_CONDITION, SENSE_NOT_READY);
+ return 0;
+ }
+ break;
+ }
+ DPRINTF("Unsupported Service Action In\n");
+ goto fail;
case 0xa0:
DPRINTF("Report LUNs (len %d)\n", len);
if (len < 16)
goto fail;
memset(outbuf, 0, 16);
outbuf[3] = 8;
- r->buf_len = 16;
+ r->iov.iov_len = 16;
+ break;
+ case 0x2f:
+ DPRINTF("Verify (sector %d, count %d)\n", lba, len);
break;
default:
DPRINTF("Unknown SCSI command (%2.2x)\n", buf[0]);
fail:
- scsi_command_complete(r, SENSE_ILLEGAL_REQUEST);
+ scsi_command_complete(r, STATUS_CHECK_CONDITION, SENSE_ILLEGAL_REQUEST);
return 0;
+ illegal_lba:
+ scsi_command_complete(r, STATUS_CHECK_CONDITION, SENSE_HARDWARE_ERROR);
+ return 0;
}
- if (r->sector_count == 0 && r->buf_len == 0) {
- scsi_command_complete(r, SENSE_NO_SENSE);
+ if (r->sector_count == 0 && r->iov.iov_len == 0) {
+ scsi_command_complete(r, STATUS_GOOD, SENSE_NO_SENSE);
}
- len = r->sector_count * 512 + r->buf_len;
+ len = r->sector_count * 512 + r->iov.iov_len;
if (is_write) {
return -len;
} else {
}
}
-void scsi_disk_destroy(SCSIDevice *s)
+static void scsi_destroy(SCSIDevice *d)
{
- qemu_free(s);
+ qemu_free(d->state);
+ qemu_free(d);
}
-SCSIDevice *scsi_disk_init(BlockDriverState *bdrv,
- int tcq,
- scsi_completionfn completion,
- void *opaque)
+SCSIDevice *scsi_disk_init(BlockDriverState *bdrv, int tcq,
+ scsi_completionfn completion, void *opaque)
{
- SCSIDevice *s;
+ SCSIDevice *d;
+ SCSIDeviceState *s;
+ uint64_t nb_sectors;
- s = (SCSIDevice *)qemu_mallocz(sizeof(SCSIDevice));
+ s = (SCSIDeviceState *)qemu_mallocz(sizeof(SCSIDeviceState));
s->bdrv = bdrv;
s->tcq = tcq;
s->completion = completion;
} else {
s->cluster_size = 1;
}
-
- return s;
+ bdrv_get_geometry(s->bdrv, &nb_sectors);
+ nb_sectors /= s->cluster_size;
+ if (nb_sectors)
+ nb_sectors--;
+ s->max_lba = nb_sectors;
+ strncpy(s->drive_serial_str, drive_get_serial(s->bdrv),
+ sizeof(s->drive_serial_str));
+ if (strlen(s->drive_serial_str) == 0)
+ pstrcpy(s->drive_serial_str, sizeof(s->drive_serial_str), "0");
+ qemu_add_vm_change_state_handler(scsi_dma_restart_cb, s);
+ d = (SCSIDevice *)qemu_mallocz(sizeof(SCSIDevice));
+ d->state = s;
+ d->destroy = scsi_destroy;
+ d->send_command = scsi_send_command;
+ d->read_data = scsi_read_data;
+ d->write_data = scsi_write_data;
+ d->cancel_io = scsi_cancel_io;
+ d->get_buf = scsi_get_buf;
+
+ return d;
}
-
projects / qemu.git / blobdiff