* or later. See the COPYING file in the top-level directory.
*
* This test is used to check that the serial output of the firmware
- * (that we provide for some machines) contains an expected string.
- * Thus we check that the firmware still boots at least to a certain
- * point and so we know that the machine is not completely broken.
+ * (that we provide for some machines) or some small mini-kernels that
+ * we provide here contains an expected string. Thus we check that the
+ * firmware/kernel still boots at least to a certain point and so we
+ * know that the machine is not completely broken.
*/
#include "qemu/osdep.h"
#include "libqtest.h"
+static const uint8_t kernel_mcf5208[] = {
+ 0x41, 0xf9, 0xfc, 0x06, 0x00, 0x00, /* lea 0xfc060000,%a0 */
+ 0x10, 0x3c, 0x00, 0x54, /* move.b #'T',%d0 */
+ 0x11, 0x7c, 0x00, 0x04, 0x00, 0x08, /* move.b #4,8(%a0) Enable TX */
+ 0x11, 0x40, 0x00, 0x0c, /* move.b %d0,12(%a0) Print 'T' */
+ 0x60, 0xfa /* bra.s loop */
+};
+
+static const uint8_t kernel_pls3adsp1800[] = {
+ 0xb0, 0x00, 0x84, 0x00, /* imm 0x8400 */
+ 0x30, 0x60, 0x00, 0x04, /* addik r3,r0,4 */
+ 0x30, 0x80, 0x00, 0x54, /* addik r4,r0,'T' */
+ 0xf0, 0x83, 0x00, 0x00, /* sbi r4,r3,0 */
+ 0xb8, 0x00, 0xff, 0xfc /* bri -4 loop */
+};
+
+static const uint8_t kernel_plml605[] = {
+ 0xe0, 0x83, 0x00, 0xb0, /* imm 0x83e0 */
+ 0x00, 0x10, 0x60, 0x30, /* addik r3,r0,0x1000 */
+ 0x54, 0x00, 0x80, 0x30, /* addik r4,r0,'T' */
+ 0x00, 0x00, 0x83, 0xf0, /* sbi r4,r3,0 */
+ 0xfc, 0xff, 0x00, 0xb8 /* bri -4 loop */
+};
+
+static const uint8_t bios_moxiesim[] = {
+ 0x20, 0x10, 0x00, 0x00, 0x03, 0xf8, /* ldi.s r1,0x3f8 */
+ 0x1b, 0x20, 0x00, 0x00, 0x00, 0x54, /* ldi.b r2,'T' */
+ 0x1e, 0x12, /* st.b r1,r2 */
+ 0x1a, 0x00, 0x00, 0x00, 0x10, 0x00 /* jmpa 0x1000 */
+};
+
+static const uint8_t bios_raspi2[] = {
+ 0x08, 0x30, 0x9f, 0xe5, /* ldr r3,[pc,#8] Get base */
+ 0x54, 0x20, 0xa0, 0xe3, /* mov r2,#'T' */
+ 0x00, 0x20, 0xc3, 0xe5, /* strb r2,[r3] */
+ 0xfb, 0xff, 0xff, 0xea, /* b loop */
+ 0x00, 0x10, 0x20, 0x3f, /* 0x3f201000 = UART0 base addr */
+};
+
+static const uint8_t kernel_aarch64[] = {
+ 0x81, 0x0a, 0x80, 0x52, /* mov w1, #0x54 */
+ 0x02, 0x20, 0xa1, 0xd2, /* mov x2, #0x9000000 */
+ 0x41, 0x00, 0x00, 0x39, /* strb w1, [x2] */
+ 0xfd, 0xff, 0xff, 0x17, /* b -12 (loop) */
+};
+
typedef struct testdef {
const char *arch; /* Target architecture */
const char *machine; /* Name of the machine */
const char *extra; /* Additional parameters */
const char *expect; /* Expected string in the serial output */
+ size_t codesize; /* Size of the kernel or bios data */
+ const uint8_t *kernel; /* Set in case we use our own mini kernel */
+ const uint8_t *bios; /* Set in case we use our own mini bios */
} testdef_t;
static testdef_t tests[] = {
{ "alpha", "clipper", "", "PCI:" },
{ "ppc", "ppce500", "", "U-Boot" },
- { "ppc", "prep", "", "Open Hack'Ware BIOS" },
+ { "ppc", "prep", "-m 96", "Memory size: 96 MB" },
+ { "ppc", "40p", "-boot d", "Booting from device d" },
+ { "ppc", "g3beige", "", "PowerPC,750" },
+ { "ppc", "mac99", "", "PowerPC,G4" },
+ { "ppc", "sam460ex", "-m 256", "DRAM: 256 MiB" },
{ "ppc64", "ppce500", "", "U-Boot" },
- { "ppc64", "prep", "", "Open Hack'Ware BIOS" },
+ { "ppc64", "prep", "-boot e", "Booting from device e" },
+ { "ppc64", "40p", "-m 192", "Memory size: 192 MB" },
+ { "ppc64", "mac99", "", "PowerPC,970FX" },
{ "ppc64", "pseries", "", "Open Firmware" },
- { "ppc64", "powernv", "-cpu POWER8", "SkiBoot" },
+ { "ppc64", "powernv", "-cpu POWER8", "OPAL" },
+ { "ppc64", "sam460ex", "-device e1000", "8086 100e" },
{ "i386", "isapc", "-cpu qemu32 -device sga", "SGABIOS" },
{ "i386", "pc", "-device sga", "SGABIOS" },
{ "i386", "q35", "-device sga", "SGABIOS" },
{ "x86_64", "isapc", "-cpu qemu32 -device sga", "SGABIOS" },
{ "x86_64", "q35", "-device sga", "SGABIOS" },
+ { "sparc", "LX", "", "TMS390S10" },
+ { "sparc", "SS-4", "", "MB86904" },
+ { "sparc", "SS-600MP", "", "TMS390Z55" },
+ { "sparc64", "sun4u", "", "UltraSPARC" },
{ "s390x", "s390-ccw-virtio",
"-nodefaults -device sclpconsole,chardev=serial0", "virtio device" },
+ { "m68k", "mcf5208evb", "", "TT", sizeof(kernel_mcf5208), kernel_mcf5208 },
+ { "microblaze", "petalogix-s3adsp1800", "", "TT",
+ sizeof(kernel_pls3adsp1800), kernel_pls3adsp1800 },
+ { "microblazeel", "petalogix-ml605", "", "TT",
+ sizeof(kernel_plml605), kernel_plml605 },
+ { "moxie", "moxiesim", "", "TT", sizeof(bios_moxiesim), 0, bios_moxiesim },
+ { "arm", "raspi2", "", "TT", sizeof(bios_raspi2), 0, bios_raspi2 },
+ { "hppa", "hppa", "", "SeaBIOS wants SYSTEM HALT" },
+ { "aarch64", "virt", "-cpu cortex-a57", "TT", sizeof(kernel_aarch64),
+ kernel_aarch64 },
+
{ NULL }
};
static void check_guest_output(const testdef_t *test, int fd)
{
bool output_ok = false;
- int i, nbr, pos = 0;
+ int i, nbr = 0, pos = 0, ccnt;
char ch;
/* Poll serial output... Wait at most 60 seconds */
for (i = 0; i < 6000; ++i) {
- while ((nbr = read(fd, &ch, 1)) == 1) {
+ ccnt = 0;
+ while (ccnt++ < 512 && (nbr = read(fd, &ch, 1)) == 1) {
if (ch == test->expect[pos]) {
pos += 1;
if (test->expect[pos] == '\0') {
static void test_machine(const void *data)
{
const testdef_t *test = data;
- char tmpname[] = "/tmp/qtest-boot-serial-XXXXXX";
- int fd;
+ char serialtmp[] = "/tmp/qtest-boot-serial-sXXXXXX";
+ char codetmp[] = "/tmp/qtest-boot-serial-cXXXXXX";
+ const char *codeparam = "";
+ const uint8_t *code = NULL;
+ int ser_fd;
- fd = mkstemp(tmpname);
- g_assert(fd != -1);
+ ser_fd = mkstemp(serialtmp);
+ g_assert(ser_fd != -1);
+
+ if (test->kernel) {
+ code = test->kernel;
+ codeparam = "-kernel";
+ } else if (test->bios) {
+ code = test->bios;
+ codeparam = "-bios";
+ }
+
+ if (code) {
+ ssize_t wlen;
+ int code_fd;
+
+ code_fd = mkstemp(codetmp);
+ g_assert(code_fd != -1);
+ wlen = write(code_fd, code, test->codesize);
+ g_assert(wlen == test->codesize);
+ close(code_fd);
+ }
/*
* Make sure that this test uses tcg if available: It is used as a
* fast-enough smoketest for that.
*/
- global_qtest = qtest_startf("-M %s,accel=tcg:kvm "
+ global_qtest = qtest_startf("%s %s -M %s,accel=tcg:kvm "
"-chardev file,id=serial0,path=%s "
"-no-shutdown -serial chardev:serial0 %s",
- test->machine, tmpname, test->extra);
- unlink(tmpname);
+ codeparam, code ? codetmp : "",
+ test->machine, serialtmp, test->extra);
+ unlink(serialtmp);
+ if (code) {
+ unlink(codetmp);
+ }
- check_guest_output(test, fd);
+ check_guest_output(test, ser_fd);
qtest_quit(global_qtest);
- close(fd);
+ close(ser_fd);
}
int main(int argc, char *argv[])
projects / qemu.git / blobdiff